LG | V-CB875HT | LG V-CB875HTV Owner’s Manual

V-CB875HTV
P/No.: 3828Fi2853D
2
13
4
5
6
7
1
3
2
54
9
10
8
6
7
-2-
12
8
11
25
Suction control switch
9
MAX
FLOOR
CARPET
SOFA
CURTAIN
MIN
OFF
10
13
14
15
18
17
19
16
20
22
23
21
24
-3-
?
Information for your
safety
Please read all the
following information, which
contains important instructions for the safety, the
use and the maintenance of the appliance.
This appliance complies with the following EC
Directives: -73/23/EEC, 93/68/EEC-Low Voltage
use
the
appliance
-
?
furniture
unsu-
the
If the mains lead is
?
appliance
damaged or faulty.
If the mains lead is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid
use
uneven
Always switch the vaccum cleaner off before
changing the dust bag.
changing or cleaning the filters.
If no dustbag is inserted, the cover cannot
Crevice
Tool(8)
Crevice Tool is for
vacuuming in those normally
places i. e. reaching cobwebs, or
inaccessible
down the side of
?
hazard.
a
outlines, books and other
objects.
pervised.
Do not
position head(6) is equipped with a
pedal(7) which allows you to alter its position
according to the type of floor to be cleaned.
Hard floor position(tiles, parquet floors...).
Press on the pedal to lower the brush.
Carpet or rug position.
Press on the pedal to lift the brush up.
Dusting Brush(10)
Dusting Brush is for vacuuming picture frames,
-
Directive-89/336EEC -EMC Directive.
Never allow children to
The 2
:
a
sofa.
Upholstery Nozzle(9)
For vacuuming uphostery, mattresses, etc. The
thread collectors help to pick up the threads and
fluff.
?
?
closed. Please do not
Do not
vacuum
stances(liquids
Do not
be
?
force!
flammable
or
vacuum
use
How to
or
explosive
sub?
gases).
hot
ash, embers
etc. nor
vacuum
water or other
?
do not reach into the
running
sharp
liquids.
appli-
remove
head(1) on the
attachment point on the
grip
When you have switched off and unplugged the
appliance, press on the button (11) to automati-
vacuum
on
cally
the
You
the tubes
rewind the cord.
telescopic
The
the dust
needs
the floor but the
-
Accessory
changing
when the cleaner is
-4-
window(15)
is
Even if the
does not appear to be full at
it should be changed.
stage,
clogged
tube.
full" indicator
coloured red.
dustbag
It could be that
head onto the end of the
"bag
completely
this
Nozzles
large cleaning
dustbag
bag
set to maximum power and the cleaner head is off
-
head and
store your
can move or
ance.
handle onto the end of the
cleaning
storage(14)
appliance in a vertical
position by sliding the hook on the large cleaning
head into the clip on the underside of the appli-
-
Fit the
and
Changing
the
up to MAX.
vacuum
Telescopic tube(4)
Hold spring latch(5).
Pull out the tube to required length.
Release spring latch to lock.
Using
steplessly
Carrying
tube.
?
increases
capacity
flexible
cleaner, press on the button(3) situated
head, then pull upwards.
Fit the
control(12)
?
the flexible hose from the
Assembling
to start the vacuum cleaner. To
during vacuuming, for example
to move a small piece of furniture or a rug, use
the Park system to support the cleaning head.
Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
cleaner.
To
and
For short breaks
the flexible hose
into the
(25)
length
Park-System(13)
brush roller.
Push the end of the
hose(2)
Press button
Suction
How to Use
Connecting
Pull out the power cord to the desired
plug into the socket.
Electronic power
When you vacuum with an attachment
ance that has a rotating brush roller:
use
stop it press the button (25) again.
objects.
Do not
in and
plug
a
great deal of very fine dust has
up the pores of the dust
bag.
?
?
?
Turn off the
appliance
and
it.
unplug
What to do if your
does not work?
Remove hose from the Vacuum Cleaner.
Open the
lifting it up
cover
until it
Your
by pressing the hook(16)
snaps into place.
is
with either
and
Check that the
appliance
equipped
paper
dust bag or a fabric dust bag(17) (depending on
model).
Take hold of the dust bag by the handle and
pull. Seal bag using the flap(18) on bag cardboard. Remove the bag and throw it away.
To refit a new bag push the cardboard support
of a new bag into the bag mount(19) until it will
a
appliance
is
and that the electrical socket
appliance
correctly plugged
is working.
in
What to do when the suction
performance reduces?
?
?
?
further.
no
go
Empty
a
as
fabric
?
above.
?
it and
Note:
device
cannot
replace it(20). Do not wash it.
as the appliance is fitted with a safety
which checks that the bag is in place you
close the lid if the bag is not fitted correctly.
Cleaning
between the dust
that you
change
bag
to remove the motor
tapping
filter(21)
advise you
and to clean it by
we
to remove the dirt and then
vacuum
Changing
appliance
and the motor. Each time
the air outlet filter
replacing
it in
cleaner.
the air outlet filters
Depending on the model you have chosen your
appliance is equipped with different types of filters
: electrostatic filter or washable HEPA filter(24).
To change these filters remove the cover of the
filter compartment(22) situated at the rear of the
appliance, by sliding the lever toward
unlock(23).
The electrostatic filter should be changed regularly. (approximately every 6 bag changes)
?
?
The washable HEPA filter with water at least
once a
year.
the
(option)
-5-
appliance
Check that the
are
and
unplug
it.
tubes, flexible hose and cleaning
not blocked.
Check that the dust
bag
is not full.
Replace
it if
necessary.
Check that the air outlet filter is not blocked.
Replace
the motor filter
The motor filter is situated inside the
?
Stop
tool
If your appliance is fitted with
dust bag follow the same instructions
the
?
it if necessary.
-5-
-4-
8
11
25
12
9
10
13
14
15
18
17
19
16
20
22
23
21
24
-3-
2
13
4
5
6
7
1
3
2
54
10
9
8
6
7
-2-
V-CB875HTV
P/No.: 3828Fi2853D
Download PDF