LG | V-CB564ST | LG V-CB564ST Owner’s Manual

Model
V-CB564S***/ V-CB567S***/ V-CB574S***/H***/ V-CB584S***/H***/ V-C5971S***/ V-C5982S***/ V-C5983H***
VTCB564S***/ VTCB567S***/ VTCB574S***/H***/ VTCB584S***/H***/ VTC5971S***/ VTC5982S***/ VTC5983H***
Language
Page
English /Arabic
13
Material
Date
Weight 100g
Part No.
2006.02.28
3828FI5891X
Color(cover/body) 1/1
Size(W*H)
150×220(mm)
Designer
geyang
Description
owner's manual
Chage Record
No.
1
2
3
4
5
6
7
8
9
Change content
Add the model name for AKD.
ECO No.
Date Designer Confirm
ACTT601417 06.02.28
GEYANG
C.Y.T
V-CB564S***/V-CB567S***
V-CB574S***/H***
V-CB584S***/H***
V-C5971S***/V-C5982S***
V-C5983H***
VTCB564***/VTCB567S***
VTCB574S***/H***
VTCB584S***/H***
VTCB5971S***/VTCB5982S***
VTC5983H***
2
2
1
8
1
9
4
3
28
10
3
5
18
11
12
34
31
6
7
19
28
2
1
29
5
3
4
8
30
9
32
Air control
lever
33
Fan
Brush
Air Cover
2
10
12
11
13
14
15
26
16
17
MIN
MAX
20
18
19
21
25
23
24
22
–3–
27
- If you stretch the elbow tube, it is returned
to its position.
Information for your safety
Using the cleaning head and Accessory
Nozzles (depending on model)
Please read all the following information,
which contains important instructions for the
safety,use and maintenance of the
appliance.
This appliance complies with the following EC
Directives:-73/23/EEC,93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance
unsupervised.
Do not use the appliance if the supply
cord is damaged or faulty.
If the main lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
Always switch the vacuum cleaner off
before :
• changing the dust bag.
• changing or cleaning the filters.
If no dustbag is inserted, the cover cannot
be closed. Please do not use force!
Do not vacuum flammable or explosive
substances (liquids or gases).
Do not vacuum hot ash, embers etc.
sharp objects.
Do not vacuum water or other liquids.
Do not vacuum fine dust.
Do not expose vacuum cleaner to heat.
Fit the large cleaning head onto the end of
the tube.
• The 2-position head (6) is equipped with a
pedal (7) which allows you to alter its
position according to the type of floor to be
cleaned.
Hard floor position (tiles, parquet
floors...). Press on the pedal to lower the
brush.
Carpet or rug position. Press on the
pedal to lift the brush up.
• Hard Floor Nozzle (30)
Efficient cleaning of hard floors (wood,
linoleum, etc.)
• Turbine brush nozzle (31)
- Air adjustment (32)
Slide the air control lever to the right for
long pile carpet and to the left for short
pile carpet.
- Cleaning turbine brush nozzle (33)
Press the button on the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
• Crevice Tool (8)
For vacuuming in those normally
inaccessible places i.e. reaching cobwebs,
or down the side of a sofa!
• Dusting brush (9)
For vacuuming picture frames, furniture
outlines, books and other uneven objects.
• Upholstery Nozzle (10)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick up the
threads and fluff.
How to Use
Connecting the flexible hose
Push the end of the head (1) on the flexible
hose (2) into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the
vacuum cleaner, press on the button (3)
situated on the head, then pull upwards.
Assembling the tubes
How to plug in and use
• Metal or plastic tube (34)
- Fit together the two tubes by twisting slightly.
• Telescopic tube (4)
- Push spring latch (5) forward.
- Pull out tube to required length.
- Release spring latch to lock.
• Elbow tube (28)
The elbow tube is for uses such as cleaning
under the sofa, table and bed easily.
- Fit the elbow tube onto the end of the
telescopic tube and the grip handle.
- If you pull the latch (29), the elbow tube
can be bent.
Pull out the supply cord to the desired
length and plug into the socket.
Press button (12) to start the vacuum
cleaner. To stop it press the button (12) again.
Adjusting the power level
(depending on model)
• The flexible hose handle (13) has a
manual air flow regulator (14) which allows
you to briefly reduce the suction level.
• Electronic power control (15)
Suction capacity increases smoothly up to
MAX.
4
Cleaning the motor filter
• Electronic power control(26)
OFF:Power off MIN:Low power
MAX:Full power
Park-System(16)
For short breaks during vacuuming, for
example to move a small piece of furniture
or a rug, use the Park system to support
the flexible hose and cleaning head.
• Slide the hook attached to the large cleaning
tool into the slot on the rear of the appliance.
Storage(17)
When you have switched off and unplugged
the appliance, press the button (11) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
Changing the dust bag
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head is off the floor but the “bag full”
indicator window(18) is completely coloured
red.
Even if the dustbag does not appear to be
full at this stage, it should be changed, as
very fine dust can clog up the pores of the
dust bag.
The motor filter is situated inside the
appliance between the dust bag and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor filter(22) and to clean it by tapping to
remove the dirt and then replacing it in the
vacuum cleaner.
Changing the air outlet filters
Depending on the model you have chosen
your appliance is equipped with different
types of filters : foam filter or electrostatic
filter(24) or anti-odour charcoal filter or
washable HEPA filter(27).
• To change these filters remove the cover
of the filter compartment(23) situated at
the rear of the appliance.
• The foam filter should be cleaned
regularly by tapping it to remove the dirt.
• The electrostatic filter or anti-odor
charcoal filter should be changed
regularly. (approximately every 6 bag
changes)
• Wash the washable HEPA filter with water
at least once a year.
What to do if your appliance
does not work?
• Turn off the appliance and unplug it.
• Open the cover by pressing the hook(19)
and lifting it up until it snaps into place.
Your appliance is equipped with either a
paper dust bag (20) or a fabric dust bag
(25).(depending on model)
• Take hold of the dust bag by the handle
and pull. Remove the bag and throw it
away.
• To refit a new bag push the cardboard
support of a new bag into the bag mount
(21) until it will go no further.
If your appliance is fitted with a
fabric dust bag follow the same
instructions as above.
Empry it and replace it(25). Do not wash it.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not
fitted correctly.
Check that the appliance is correctly plugged
in and that the electrical socket is working.
What to do when the suction
performance reduces?
• Stop the appliance and unplug it.
• Check that the tubes, flexible hose and
cleaning tool are not blocked.
• Check that the dust bag is not full.Replace
if necessary.
• Check that the air outlet filter is not
blocked. Replace if necessary.
–5–
http://www.lge.com/
P/No.3828FI5891X
V-CB564S***/V-CB567S***
V-CB574S***/H***
V-CB584S***/H***
V-C5971S***/V-C5982S***
V-C5983H***
VTCB564***/VTCB567S***
VTCB574S***/H***
VTCB584S***/H***
VTCB5971S***/VTCB5982S***
VTC5983H***
2
2
1
8
1
9
4
3
28
10
3
5
18
11
12
34
31
6
7
19
28
2
1
29
5
3
4
8
30
9
32
33
-2-
10
-4-
-5-
http://www.lge.com/
P/No.3828FI5891X
Download PDF