LG | V-CP743NB | LG V-CP743NB Owner’s Manual

Basic Parts
2
17
12
1
13
3
4
18
7
9
8
Optional
The different
depend
on
Parts
figure
and
quantity
of the
following parts
bought.
5
the different models which you have
6
7
Accessory
These
specifications
10
are
subject to change according
to the
agent / buyer's request.
11
-2-
2
1
7
4
3
8
65
9
12
11
10
16
14
13
V-CP733NBR/NB
V-CP743NB/NBB/ND/NT
15
V-CP753NB
13
17
V-CP743RD
V-CP752RD/RT/RDN
V-CP753RD
18
21
19
22
20
--3--
Information for your
Please read all the
Fit the
safety
?
following information,
which contains important instructions for the
safety,use and maintenance of the
appliance.
appliance complies with the following EC
Directives:-73/23/EEC,93/68/EEC-Low
Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance
unsupervised.
Do not use the appliance if the supply
cord is damaged or faulty.
If the main lead is damaged, it must be
replaced by an approved LG Electronics
Service Agent in order to avoid a hazard.
Always switch the vacuum cleaner off
Hard floor
floors...).
rug position. Press
lift the brush up.
Carpet
pedal to
?
or
(9)
vacuuming
inaccessible places
or
?
the dust
changing
bag.
changing or cleaning the filters.
If no dustbag is inserted, the cover cannot
?
be closed. Please do not
use
force!
Do not vacuum flammable or
substances (liquids or gases).
vacuum
?
explosive
the
down the side of
in
i.e.
a
those normally
reaching cobwebs,
sofa!
Dusting brush (10)
vacuuming picture frames,
furniture
outlines, books and other
objects.
uneven
Upholstery Nozzle (11)
For vacuuming uphostery, mattresses, etc.
The thread collectors help to pick the
threads and fluff.
How to
hot ash, embers etc.
plug
in and
use
Pull out the
supply cord to the desired
length and plug into the socket.
Press button (13) to start the vacuum
cleaner. To stop it press the button (13) again.
sharp objects.
vacuum
water or other
liquids.
How to Use
Connecting
on
Crevice Tool
For
For
?
Do not
position (tiles, parquet
on the pedal to lower the
Press
brush.
:
Do not
2-position head (7) is equipped with a
pedal (8) which allows you to alter its
position according to the type of floor to be
The
cleaned.
This
before
head onto the end of
large cleaning
the tube.
the flexible hose
Push the end of the head (1) on the flexible
hose (2) into the attachment point on the
vacuum
To
cleaner.
the
remove
flexible
hose from the
cleaner, press on the button (3)
situated on the head, then pull upwards.
vacuum
Assembling
?
the tubes
Metal or plastic tube (27,33)
Fit together the two tubes
-
Storage(16)
by twisting
When you have switched off and unplugged
the appliance, press the button (12) to
automatically rewind the cord.
slightly.
?
Telescopic
-
-
-
Push
tube
spring
(4)
Pull out tube to
Release
Using
the
You
latch
spring
(5) forward.
required length.
cleaning
head and
on
move or
store your appliance in a
the hook on the
position by sliding
large cleaning head into
underside of the appliance.
latch to lock.
Nozzles (depending
can
vertical
Accessory
model)
4
the
clip
on
the
the dust
Changing
The
dustbag
needs
bag
changing
What to do if your
does not work?
when the
cleaner is set to maximum power and the
cleaner head is off the floor but the "bag full"
indicator
window(17)
is
completely
coloured
red.
Even if the
dustbag does not appear to be
full at this stage, it should be changed, as
very fine dust
dust bag.
?
Turn off the
the
?Open
and
can
clog
Check that the
is
correctly plugged
working.
in and that the electrical socket is
up the pores of the
appliance and unplug it.
by pressing the hook(18)
up until it snaps into place.
appliance
appliance
What to do when the suction
performance reduces?
cover
it
lifting
Your
appliance is equipped with either a
paper dust bag (19) or a cloth paper (21)
(depending on model)
?Stop
the
?Check
appliance
and
unplug
it.
that the tubes, flexible hose and
tool are not blocked.
cleaning
?Check
that the dust
bag
is not
full.Replace
if necessary.
?Take
hold of the dust
and
away.
?To
refit
a
new
support of
(20)
bag by the handle
bag and throw it
Remove the
pull.
a
bag push
bag into
no
the
bag
mount
further.
If your appliance is fitted with a
fabric dust bag follow the same
instructions
as
above.
replace it(21). Do not wash it.
Note: as the appliance is fitted with a safety
device which checks that the bag is in place
you cannot close the lid if the bag is not
fitted correctly.
Empty
it and
Cleaning
the motor filter
The motor filter is situated inside the
appliance
between the dust
bag
and the
motor. Each time that you change the air
outlet filter we advise you to remove the
motor
filter(22)
and to clean it
remove
the dirt and then
vacuum
cleaner.
that the air outlet filter is not
blocked.
the cardboard
new
until it will go
?Check
by tapping to
replacing it in the
5
Replace
if necessary.
http://www.lge.com/
P/No.: AFN30148301
2
17
12
1
13
3
4
18
7
9
8
5
6
7
10
11
-2-
2
1
7
4
3
8
65
9
12
11
10
16
14
13
V-CP733NBR/NB
V-CP743NB/NBB/ND/NT
15
V-CP753NB
13
17
V-CP743RD
V-CP752RD/RT/RDN
V-CP753RD
18
21
19
22
20
--3--
4
-5-
http://www.lge.com/
P/No.: AFN30148301
Download PDF

advertising