LG | RC9066C3F | LG RC9066C3F Owner’s Manual

RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
MF68721071
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
WORK
SEC.
가
BRAND
나
MODEL
다
P/NO.
LG
RC9066**F RC9066*F
MFL68721071
71
PRINTING DEGREE
MATERIAL AND PRINTING DESCRIPTION
EXTERIER INTERIER
1
1
LG MODEL 명
LANGUAGE
PAGE
REMARK
-
영어
36
EEC
모조지 80g OFFSET 인쇄
<< 주기 >>
<BACK>
<FRONT>
210
가
1.
2.
3.
4.
5.
재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.
인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.
외곽치수는 절단후 치수임.
양산전에 설계 한도를 득할 것.
본 부품에 금지물질이 포함되지 않도록 하고,
상세 내용은 LG(63)-A-5501-34를 만족할 것.
나
P/NO. 다
<< NOTES >>
148
148
1.
2.
3.
4.
5.
Material, printing and exterier size are refer to work tables.
Printing, text size and line are based on LG design film.
Exterier size on the drawing is cutting line.
Before product controlled by criteria sample.
The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)
and details should comply with LG standard of LG(63)-A-5501-34.
PDF
ILLUSTRATOR
TRIG.
UNIT
mm
SCALE
1
1
MODELING DESIGNED REVIEWED CHECKED APPROVED
박은진
16.08.16
4
3
2
LG 전자
1
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
REF. NO.
시방 번호
DATE
년/월/일
PREPARED APPROVED
시방자
승인자
(주)
LG Electronics Inc.
윤혜진
16.08.16
한일탁
16.08.16
RELATED DWG.
T
I
T
L
E
DWG.
No.
DR COMPLETED
도면 DR 완료
완료일 :
MANUAL,OWNER’S
Neo Prime Dryer
1/1
MFL68721071
OWNER'S MANUAL
DRYER
Before beginning installation, read these instructions carefully. This
will simplify installation and ensure that the product is installed
correctly and safely. Leave these instructions near the product after
installation for future reference.
RC9066**F / RC9066*F
MFL68721071
Rev.00_081616
www.lg.com
TABLE OF CONTENTS
This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS........................................................3
IMPORTANT SAFETY INSTRUCTIONS..................................................... 3
INSTALLATION.......................................................................10
Specifications............................................................................................ 10
Accessories (Optional).............................................................................. 10
Installation Place Requirements................................................................ 11
Stacking Installation Instructions............................................................... 12
OPERATION............................................................................15
Using the Appliance................................................................................... 15
Sorting Laundry......................................................................................... 16
Control Panel............................................................................................. 17
Programme Table...................................................................................... 18
Option Programme.................................................................................... 20
Rack Dry (Optional)................................................................................... 22
SMART FUNCTIONS..............................................................23
Using the Tag On Function........................................................................ 23
Using the Appliance................................................................................... 23
Using the Smart Diagnosis™ Function...................................................... 24
MAINTENANCE.......................................................................25
Cleaning the Lint Filter............................................................................... 25
Emptying the Water Container.................................................................. 26
Cleaning the Cool Air Inlet Grill.................................................................. 26
Wiping the Moisture Sensor...................................................................... 26
Cleaning the Condenser............................................................................ 27
TROUBLESHOOTING............................................................28
Diagnosing Problems................................................................................ 28
Error Codes............................................................................................... 32
WARRANTY.............................................................................33
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect operation
of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons
when using your product, basic safety precautions should be
followed, including the following:
Children in the Household
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
3
EN
Installation
•Make
•
sure the appliance is properly installed, grounded, and
adjusted by qualified service personnel according to the installation
instructions.
•Never
•
attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This
•
appliance should only be transported by two or more people
holding the appliance securely.
•Do
• not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind, or
rain or temperatures below freezing.
•Tighten
•
the drain hose to avoid separation.
•If
• the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized service
centre.
•Do
• not plug multiple socket outlets, an extension power cable or
adapter with this appliance.
4
EN
•This
•
appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This
•
appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This
•
appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug
must be plugged into an appropriate socket outlet that is installed
and grounded in accordance with all local codes and ordinances.
•Improper
•
connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
•Do
• not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
Operation
•Do
• not attempt to separate any panels or disassemble the
appliance. Do not apply any sharp objects to the control panel in
order to operate the appliance.
•Do
• not repair or replace any part of the appliance. All repairs
and servicing must be performed by qualified service personnel
unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
5
EN
•Keep
•
the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do
• not put animals, such as pets into the appliance.
•Do
• not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never
•
reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do
• not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).
Improper use can cause fire or explosion.
•In
• case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do
• not push down the door excessively, when the appliance door is
open.
•Use
•
new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
•Do
• not touch the door during a high temperature programme.
•Do
• not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
6
EN
•If
• the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep
•
all washing detergents, softener and bleach away from
children.
•Do
• not touch the power plug or the appliance controls with wet
hands.
•Do
• not bend the power cable excessively or place a heavy object
on it.
Maintenance
•Securely
•
plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect
•
the appliance from the power supply before cleaning
the appliance. Setting the controls to the OFF or stand by position
does not disconnect this appliance from the power supply.
•Do
• not spray water inside or outside the appliance to clean it.
•Never
•
unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
7
EN
Technical Safety for Using the Dryer
•Do
• not dry unwashed items in the appliance.
•Fabric
•
softeners, or similar products, should be used as specified
by the fabric softener instructions.
•Remove
•
all objects from pockets such as lighters and matches.
•Never
•
stop the appliance before the end of the drying cycle unless
all items are quickly removed and spread out so that the heat is
dissipated.
•The
•
appliance is not to be used if industrial chemicals have been
used for cleaning.
•Items
•
such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with
foam rubber pads should not be dried in the appliance.
•Do
• not drink the condensed water. Failure to do so may result in
food-borne illnesses.
•The
•
lint trap has to be cleaned frequently.
•Lint
•
must not to be allowed to accumulate around the appliance.
•Do
• not spray dry cleaning detergent directly onto the appliance or
use the appliance to dry clothes left with dry cleaning detergent.
•Do
• not dry clothes stained with oil substances. Oil substances
(including edible oils) stained on clothes cannot be completely
removed even after washing with water.
8
EN
•The
•
appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly
switched on and off by a utility.
•Remove
•
clothes from the product immediately when drying is
complete or the power is turned off during the drying process.
Leaving clothes that has been dried in the appliance unattended
could result in fire. Clothes removed from the appliance after drying
could result in fire. Remove clothes immediately after drying, and
then hang or lay the clothes flat to cool.
Disposal
•Before
•
discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose
•
of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
•Remove
•
the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
9
INSTALLATION
EN
Specifications
2
1
2
1
3
4
5
1
Water container
2
Control panel
3
Glass door
4
Opaque door
5
Condenser cover
6
Air ventilation grill
5
6
6
Model
Power supply
Size
Product weight
Allowable temperature
Max. capacity
RC9066**F, RC9066*F
220 - 240 V~, 50 Hz
600 mm (W) X 640 mm (D) X 850 mm(H)
43 - 46 kg
5 - 35 °C
10.2 kg
••Appearance and specifications may vary without notice to improve the quality of the appliance.
Accessories (Optional)
Please contact the LG Electronics Customer Information Centre for purchase.
Condensing Drain Hose
and Hose Holder
10
Dry Rack
Stacking Kit
EN
Installation Place
Requirements
Positioning
Location
30-50 cm
2 cm
2 cm
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
••Do not overload the outlet with more than one
appliance.
Additional Clearance : For the wall, 30 – 50
cm: rear /2 cm: right & left side
••Do not place or store laundry products on top
of the appliance at any time.
••These products may damage the finish or
controls.
NOTE
••For better drying performance, please keep the
rear of the appliance away from wall.
••Do not install the appliance where there is a
risk of frost or dust.
••The appliance may not be able to operate
properly or may be damaged by freezing of
condensed water in the pump and drain hose.
••Do not install the appliance next to a hightemperature appliance like refrigerator, oven
or stove etc, which can cause poor drying
performance and programme duration, and
adversely affect the proper functioning of the
compressor. The appliance performs best at a
room temperature of 23 °C.
••Install the appliance on a flat hard floor.
••Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
••Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
••Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The reliability
of the electronic control unit may be impaired
at temperatures below freezing point.
••If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
••Please ensure that when the appliance is
installed, it is easily accessible for an engineer
in the event of a breakdown.
••With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure
the appliance is stable, and a clearance of
approximately 20 mm is left between the top
of the appliance and the underside of any
work-top.
Ventilation Requirement
••Alcove or under counter
−−Ensure air flow of 3.17 m3/min through the
appliance
••Closet
−−Closet door must have 2 (louvered) openings,
each having a minimum area of 387 cm2,
located 8 cm from bottom and top of door.
11
EN
WARNING
••Avoid installing the appliance around a heat
source.The rear side of the appliance must
be well ventilated. Failure to follow these
instructions may result in problems.
••The appliance should not be installed next to a
refrigeration appliance.
••The appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
••Do not use an extension cord or double
adapter.
••Always unplug the appliance after use.
••Connect the appliance to an earthed socket in
accordance with current wiring regulations.
••The appliance must be positioned so that the
plug is easily accessible.
Stacking Installation
Instructions
Your dryer can be placed on top of an LG
washing machine and securely fixed with a
stacking kit. This installation must be conducted
by qualified service personnel to ensure it has
been installed correctly.
The qualified service personnel will ensure
you have the correct stacking kit for your
model of washing machine and will ensure it is
firmly fixed. For these reasons, expert fitting is
essential.
Stacking Kit
In order to stack this dryer an LG stacking kit is
required.
Dryer
Washing
machine
This dryer may only be stacked on top of an
LG washing machine. Do not attempt to stack
this dryer on any other washing machine, as
damage, injury or property damage could result.
Shape and
assembly
direction
12
Washing Machine Top plate
size
550 mm
600 mm
EN
Installation Procedure
1
Place the LG dryer on the LG washing
machine.
2
Remove the two screws from the bottom of
the rear cover on each side as illustrated
below.
3
Align the stacking kit holes and the rear cover
holes.
••3-1) 600 mm
WARNING
••Incorrect installation can cause serious
accidents.
••The weight of the appliance and the height of
installation make the stacking procedure too
risky for one person. This procedure should
be performed by two or more qualified service
personnel.
••The appliance is not suitable for a built-in
installation. Please do not install as a built-in
appliance.
••Do not operate if the appliance is not properly
stacked.
••3-1) 550 mm
4
Fasten the two screws that were removed
earlier from the dryer to the stacking kit.
5
Use the four screws in the accessory box (16
mm) to assemble the washing machine rear
cover and stacking kit.
6
The procedure for the opposite side will be
the same.
13
EN
Condensed Water Drain-out
Leveling the appliance
Normally, condensed water is pumped up to the
water container where water is collected until
manually emptied. Water can also be drained
out directly to a mains drain, especially when the
dryer is stacked on top of a washing machine.
With a connecting kit for the mains drain hose,
simply change the water path and re-route to the
drainage facility as below:
Leveling the appliance prevents unnecessary
noise and vibration. Place the appliance on a
solid, level floor.
If the appliance is not properly level, adjust the
front leveling feet as necessary.
Turn them clockwise to raise and counterclockwise to lower until the appliance no longer
wobbles, both front-to-back and side-to-side and
corner-to-corner.
1
Take the connecting kit out.
Adjustable Feet
2
Separate the water container hose from the
kit.
Adjustable Feet
3
14
Connect the drain hose to the kit.
Adjustable Feet
Diagonal Check
••When pushing down the edges of the top plate
diagonally, the appliance should not move up
and down at all (Check both directions). If the
appliance rocks when pushing the top plate
diagonally, adjust the feet again.
OPERATION
EN
Using the Appliance
Before the first cycle, set the appliance to dry
for five minutes to warm up the drum. Open
the door between loads the first few times you
use the appliance to allow any odours from the
interior of the appliance to disperse.
1
Ensure the lint filter and water container are
clean.
••The lint filter is inside the door rim. It needs
to be cleaned before each drying cycle.
••Open the door and ensure the lint filter is
clean. If it is not, please clean the lint filter.
CAUTION
••Be careful not to trap laundry between the
door and rubber seal.
3
Turn the power on.
••Press the Power button. The indicator icon
above the button will become illuminated,
indicating that the appliance is all set to run.
4
Select the drying programme you want.
••You can choose a programme by turning
the programme selector knob until the
required programme is indicated.
••If you press the Start/Pause button without
choosing a programme, the appliance
will proceed with the Cotton programme.
Please refer to the programme table for the
detailed information.
5
Press the Start/Pause button.
6
After the cycle has finished, open the door
and remove the laundry.
7
Turn off the appliance.
••Press the Power button.
••Also check if the water container needs to
be emptied for optimum drying results.
WARNING
••Do not drink the condensed water.
NOTE
••In some instances, LED window may
display
(Empty water symbol) and the
appliance may stop because the water
container is full.
2
Place laundry into the drum after sorting.
••The clothes should be sorted by fabric type
and dryness level and all the strings and
belts of clothes should be well tied and fixed
before being put into the drum. Push the
laundry to the back to keep it away from
the door seal. Otherwise, the door seal and
clothes may be damaged. Close the door.
15
EN
CAUTION
••Be careful! The drum inside may still be hot.
••The appliance must not be used for purposes
other than those for which it was designed.
NOTE
••The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that
laundry is left at a temperature that ensures the
laundry will not be damaged.
••A high atmospheric temperature and a small
room may both increase drying time as well as
energy consumption.
Rubber and Plastics
••Do not dry any items made from or containing
rubber or plastics such as:
−−Aprons, Bibs and Chair Covers
−−Curtains and Table Clothes
−−Bathmats
Fiberglass
••Do not dry fiberglass items in the appliance.
Glass particles left in the appliance may be
subsequently picked up by your clothes in later
cycles.
Icon
Sorting Laundry
Clothes have their own wash care labels, so
drying according to the wash care label is
recommended.
Not only that, the laundry must be sorted
according to size and type of fabric.
For the best drying performance and most
efficient energy usage, do not overload the
appliance.
Woollens
••Dry woollens on the Wool programme. Be sure
to follow fabric care label symbols first. Wool
may not be completely dried from the cycle,
so do not repeat drying. Pull woollens to their
original shape and dry them flat.
Woven and Loopknit Materials
••Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press and Synthetics
••Do not overload the appliance. Take out
permanent press items as soon as the
appliance stops to reduce creases.
Baby Clothes and Night Gowns
••Always check fabric care labels.
16
Description
Dry
Tumble dry
Permanent Press /
Crease resistant
Gentle / Delicate
Do not tumble dry
Do not dry
High heating
Medium heating
Low heating
No Heating / Air
Line dry / Hang to dry
Drip dry
Dry flat
In the shade
EN
Control Panel
1
2
3
4
Power Button
••Press the Power button to turn power on
and off.
••Press the Power button to cancel the
Time Delay function.
Programme Selector
••Programmes are available according to
the laundry type.
••The lamp will light up to indicate the
selected programme.
Start/Pause Button
••This Start/Pause button is used to start
or pause a dry cycle.
••When in Pause, the power is turned off
automatically after four minutes.
Display
••
: This icon indicates that the lint filter
should be cleaned or is clogged.
−−Cleaning notice: When you press the Power
button, the icon will become displayed.
−−Clogging notice: This icon will become
displayed with a buzzer sound whilst the
appliance is in operation.
••
: This icon indicates that the water
container needs to be emptied or is full.
−−Emptying notice: When you press the Power
button, this icon will become displayed.
−−Full water notice: The icon will become
displayed and a buzzer will sound while the
appliance is in operation.
••
: This icon indicates that the condenser
should be cleaned. If the icon is displayed,
clean the condenser promptly.
Additional Programme Buttons
••Use these buttons to select the desired
options for the selected programme.
17
EN
Programme Table
Drying Programme
Programme
Cotton
Mixed Fabric
Easy Care
Bulky Item
Jeans
18
Sensor Dry Programmes
Laundry Type
Detail
Towels, dressing gowns and
For thick and quilted fabrics
bed linen
Terry towels, tea towels, towels For thick and quilted fabrics that
and bed linen
do not need to be ironed
Bath towels, tea towels,
For fabrics that do not need to
underwear and cotton socks
be ironed
For fabrics that do not need to
Sheets, pillowcase and towels
be ironed
Bed linen, table linen, towels,
For fabrics that need to be
T-shirts, polo shirts and work
ironed
clothes
Bed linen, table linen, tracksuits, For thick and quilted fabrics that
anoraks and blankets
do not need to be ironed
For fabrics that do not need to
Shirts and blouses
be ironed
Trousers, dressers, skirts and
For fabrics that need to be
blouses
ironed
For polyamide, acrylic, and
Shirts, T-shirts, trousers, underpolyester that do not need to be
wear and socks
ironed
Shirts, T-shirts, under-wear,
For polyamide, acrylic, polyester
anoraks and socks
that do need to be ironed
Bed clothes, sheets
For bulky items
Jeans and colour fading
For jeans which do not need to
garments.
be ironed
Drying Level
Extra
Very
Cupboard
Light
Iron
Very
Cupboard
Iron
Cupboard
Iron
-
EN
Programme
Skin Care
Sports Wear
Quick Dry
Delicate
Wool
Programme
Rack Dry
Cool Air
Warm Air
Sensor Dry Programmes
Laundry Type
Detail
For cotton fabrics which do not
T-shirts, pillowcase, and towels
need to be ironed
Soccer kit and training wear
For polyester material
Linen and towels (excluding
For small loads of suitable
delicate fabrics) sports wear,
fabrics with short drying times
bulky Item cycle.
For fabrics that are heatSilk, fine fabrics and lingerie
sensitive, such as synthetic
fabrics
Wool
For wool fabrics
Timed Drying Programmes
Laundry Type
Detail
Refreshes clothes without
Silk, wool, delicate lingerie
tumble drying
All fabrics that need refreshing
Tumbles without heat
Bath towels, bath robes,
Small Items & damp clothing,
dishclothes and acrylic quilted Everyday items suitable for heat
fabrics
drying
Drying Level
Drying Level
-
CAUTION
••If the load is less than 1 kg, please use the Warm Air programme in Timed Drying programmes.
Wool items should be dried using the Wool programme and heat-sensitive fabrics including silk,
underwear and lingerie should be dried using the Delicate programme. Please comply with the
recommended laundry load when you select your desired programme. Otherwise, your clothes may
be damaged.
NOTE
••The test results depend on room temperature, type and amount of load, water hardness and water
inlet temperature.
••If the appliance is installed as built under, it may cause performance degradation.
••If the laundry is not spun at a high speed during washing, energy consumption and drying time will
increase.
19
EN
Option Programme
Drum Light
Time Delay
Whilst the appliance is running it is possible to
see inside the drum if you select the Drum Light
function.
••Light on : Door is opened.
••Light off : Door is closed. The light is turned off
automatically.
You can use the Time Delay option to delay the
finishing time of the drying cycle. Maximum Time
Delay is 19 hours. Minimum Time Delay is 3
hours.
1
Turn the appliance on.
2
Select a programme.
Spin Speed
3
Press the Time Delay button.
4
Set time delay hour(s) by pressing the
button.
This additional program is able to control drying
time, allowing you to select high or normal.
••The default option is Normal.
5
Press the Start/Pause button.
Anti Crease (
,
)
The Anti Crease option prevents creases that
are formed when the laundry is not unloaded
promptly at the end of the drying cycle.
When Anti Crease is selected, the appliance
repeatedly runs and pauses, giving you two
hours to unload the laundry. If the door is
opened during the Anti Crease option, the option
is cancelled.
Favorite
The Favorite option allows you to store a
customized dry programme for future use.
1
Turn the appliance on.
2
Select a programme.
3
Select the option or additional programme.
(Anti Crease, Spin Speed etc.)
4
Press and hold the Favorite option button for
three seconds.
The Favorite option is now stored for future
use. To reuse the stored programme, select
the Favorite option and press the Start/Pause
button.
20
Option
Hand Iron
This function keeps the garments more moist
than the standard Iron dry level.
1
Turn the appliance on.
2
Select a programme.
3
Press the Dry level button and select Iron.
4
Press the Option button and select Hand
Iron.
5
Press the Start/Pause button.
Hand Iron is available to programmes specified
in the table below.
Programme
Cotton
Mixed Fabric
Easy Care
Dry Level
Iron
EN
Damp Dry Beep
With this option, the appliance will beep when
the load is ready for ironing.
This allows you to remove faster-drying
lightweight items or items that you would like to
iron or hang while still slightly damp.
1
Turn the appliance on.
2
Select a programme.
3
Press the Dry level button and select a level.
4
Press the Option button and select Damp
Dry Beep.
5
Press the Start/Pause button.
When the laundry is ready for ironing, the
buzzer will sound for approximately one
minute.
7
Press the Start/Pause button and open the
door.
8
Take out laundry which you wish to iron.
(Leave the other laundry in the appliance.)
9
Close the door and press the Start/Pause
button.
Damp Dry Beep is available to programmes
specified in the table below.
Cotton
Mixed Fabric
Easy Care
)
Use this option to disable the controls. This
feature can prevent children from changing
cycles or operating the appliance.
Locking the Control Panel
6
Programme
Child Lock (
1
Press and hold the Child Lock button for
three seconds.
2
A beeper will sound, and CL will appear on
the display.
When the Child Lock is set, all buttons are
locked except the Power button.
NOTE
••Turning off the power or completing all cycles
will not reset the child lock function. You must
deactivate child lock before you can access
any other functions.
Unlocking the Control Panel
Press and hold the Child Lock button for three
seconds.
••A beeper will sound and the remaining time for
the current programme will reappear on the
display.
Buzzer
This option enables you to adjust the volume of
the beeper sound.
Dry Level
Extra/Very
Cupboard/Light
Very/Cupboard
Cupboard
21
EN
Rack Dry (Optional)
The dryer rack is placed inside the appliance,
as in the picture below. Remove and discard
packing material before use.
The Rack Dry is designed for use with laundry
that must be dried flat, without tumbling,
including sweaters and delicate fabrics.
1
Open the door.
2
Insert the hook to the drum centre.
3
Place the dryer rack on the structure
above the lint filter and press it to complete
assembly.
4
Place wet items on top of the rack. Allow
space around items for air to circulate.
••The rack does not move, but the drum will
rotate.
22
5
Close the door.
6
Turn power on and select Rack Dry.
7
Press the Start/Pause button.
NOTE
••Check the lint filter and remove any lint
accumulated from items dried on the rack.
SMART FUNCTIONS
Using the Tag On Function
Conveniently use the Smart Diagnosis™ to
communicate with the appliance directly from a
smart phone.
••The Tag On function can only be used with
most smart phones equipped with the NFC
(Near Field Communication) function and
based on the Android OS (operating system).
Installation of the Application
••Search LG Smart Laundry&DW Global on the
Google Play Store from your smart phone.
snG㏘⫼䏬
EN
NOTE
••Press
in the LG Smart Laundry&DW
Global application for a more detailed guide on
how to use the Tag On function.
••Depending on the smart phone manufacturer
and Android OS version, the NFC activation
process may differ. Refer to the manual of your
smart phone for details.
••Because of the characteristics of NFC, if the
transmission distance is too far, or if there is
a metal sticker or a protective case on the
phone, transmission will not be good. In some
cases, NFC-equipped phones may be unable
to transmit successfully.
••The content found in this manual may differ
depending on the version of LG Smart
Laundry&DW Global application, and it may be
modified without informing customers.
Using the Appliance
LG Smart Laundry&DW Global application
allows you to use various features for your
convenience.
••Cycle Download
••Smart Diagnosis™
••Tag On Cycle Set
••Laundry Stats
23
EN
Using the Smart Diagnosis™
Function
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails.
Smart Diagnosis™ can not be activated
unless the appliance is connected to power.
If the appliance is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.
1
Press the Power button to turn on the
washing machine. Do not press any other
buttons or turn the programme selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the Power button.
x.
Ma
mm
0
1
3
Press and hold the
(More) button for three
seconds, while holding the mouthpiece of
your phone close to the Smart Diagnosis™
icon and Power button.
4
Keep the phone in place until the tone
transmission has finished. Time remaining for
data transfer is displayed.
••For best results, do not move the phone
while the tones are being transmitted.
••If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
LG Electronics
service centre
24
5
Once the countdown is over and the tones
have stopped, resume your conversation with
the call centre agent, who will then be able to
assist you using the information transmitted
for analysis.
NOTE
••The Smart Diagnosis™ function depends on
the local call quality.
••The communication performance will improve
and you can receive better service if you use
the home phone.
••If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
MAINTENANCE
WARNING
••Remove the power plug when you clean the
appliance. Not removing the plug may result in
electric shock.
EN
5
Dry the lint filter completely, close and
reinsert the lint filter.
Cleaning the Lint Filter
Clean the lint filter before each drying cycle. It
should also be cleaned if the
icon becomes
illuminated and the buzzer sounds while the
appliance is in operation.
Cleaning the lint filter will reduce drying time and
energy consumption.
1
Open the door.
2
Remove the lint filter.
3
Open the lint filter and remove all the lint.
4
Rinse away the lint under warm, running
water.
NOTE
••Remove moisture from the mesh. Otherwise,
the lint filter may be clogged due to water film
and the appliance may not operate.
••If the lint filter is not in the appliance, you can
not operate the appliance.
25
EN
Emptying the Water Container
Condensed water is collected in the water
container.
Empty the water container after every use. Not
doing so will affect the drying performance.
If the water container is full, the
icon glows
and the buzzer sounds while the appliance
is operating. If this should occur, the water
container needs to be emptied within the next
hour.
1
Cleaning the Cool Air Inlet
Grill
Vacuum the Cool Air Inlet grill 3 – 4 times a year
to make sure there is no build up of lint or dirt
that may cause improper air flow.
Pull out the water container.
NOTE
2
Empty the water container in the sink.
••Warm air is exhausted through the ventilation
grill.
••Adequate ventilation should be provided to
avoid the back flow of gases into the room from
units burning other fuels, such as open fires.
Wiping the Moisture Sensor
This device senses the moisture level of the
laundry during operation, which means it must
be cleaned regularly to remove any build up of
lime scale on the surface of the sensor.
Wipe the sensors inside the drum.
3
Push it back into the appliance.
4
Press the Start/Pause button.
CAUTION
••Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a
rough sponge.
26
EN
Cleaning the Condenser
4
Clean the condenser thoroughly under a tap,
letting the water flow through.
5
Put everything back together by following the
instructions in reverse order.
The condenser is also a very important part for
efficient drying performance result, so it needs
special care from you. It is recommended that
the condenser be cleaned three or four times a
icon blinks.
year or when the
1
Push the cap and open the condensing
cover.
2
Open the seal by turning the locking lever.
3
Pull the condenser out by inserting a finger
into the tab at the front of the condenser. (Do
not force the condenser).
NOTE
••If the
icon is displayed, clean the
condenser promptly.
CAUTION
••The locking lever must be closed after cleaning
the condenser as illustrated above.
••Operating when the condenser is clogged
with lint can damage the appliance. This also
increases energy consumption.
••Do not use sharp objects to clean the heat
exchanger. This could cause damage and
leaking.
••Never operate the appliance without the heat
exchanger.
27
TROUBLESHOOTING
EN
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems
at an early stage. If the appliance does not function properly or does not function at all, check the
following before you call for service:
Diagnosing Problems
Symptoms
Appliance will not
turn on.
Appliance does not
heat.
Clothes take too long
to dry.
28
Reason
Solution
••Make sure that the plug is securely
plugged into a grounded outlet
matching the appliance’s rating plate.
•
•
Reset circuit breaker or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
•
•
Reset circuit breaker or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
••Separate heavy items from lightweight
items. Larger and heavier items take
Load is not properly sorted.
longer to dry. Light items in a load
with heavy items can fool the sensor
because the light items dry faster.
••Heavy fabrics take longer to dry
because they tend to retain more
moisture. To help reduce and maintain
Large load of heavy fabrics.
more consistent drying times for large
and heavy fabrics, separate these
items into smaller loads of a consistent
size.
••Use the appropriate control settings for
Appliance controls are not set the type of load you are drying. Some
properly.
loads may require an adjustment of the
dry level setting for proper drying.
••Remove the lint from the lint filter
before every cycle. With the lint
removed, hold the lint filter up to a
to see if it is dirty or clogged. With
Lint filter needs to be cleaned. light
some loads that produce high amounts
of lint, such as new bath towels, it may
be necessary to pause the cycle and
clean the filter during the cycle.
Power cord is not properly
plugged in.
EN
Symptoms
Clothes take too long
to dry.
Drying time is not
consistent.
Greasy or dirty spots
are left on clothes.
Reason
Solution
•
•
Reset
circuit
breaker
or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
••Divide extra large loads into smaller
Appliance is overloaded.
loads for better drying performance
and efficiency.
••If you are drying a very small load,
add a few extra items to ensure proper
tumbling action. If the load is very
small and you are using Sensor Dry
Appliance is underloaded.
programmes, the electronic control
cannot properly sense the dryness of
the load and may shut off too soon.
Use Timed Drying programmes or add
some extra wet clothes to the load.
••The drying time for a load will vary
depending on the type of heat used
(electric), the size of the load, the type
Heat settings, load size, or
of fabrics, the wetness of the clothes,
dampness of clothing is not
and lint filter. Even an unbalanced
consistent.
load in the appliance can cause poor
spinning, resulting in wetter clothes
which will take longer to dry.
••When washing laundry that is to
be dried in the appliance, use the
Fabric softener is used
correct amount of fabric softener as
incorrectly.
recommended by the manufacturer of
the fabric softener.
••Use the appliance to dry only clean
Clean and dirty clothes are
items. Soil from dirty clothes can
being dried together.
transfer to the clean clothes in the
same or later loads.
••Stains on dried clothes could be
stains that were not removed during
the washing process. Make sure
Clothes were not properly
that clothes are being completely
cleaned or rinsed before
cleaned or rinsed according to the
being placed in the appliance.
instructions for your washing machine
and detergent. Some difficult soils may
require pre-treating prior to washing.
29
EN
Symptoms
Clothes are wrinkled.
Reason
Clothes have dried too long
(overdried).
Clothes have been left in the
appliance for too long after
cycle ends.
Solution
••Over drying a load of laundry can lead
to wrinkled clothes. Try a shorter drying
time.
••Use the Anti crease option.
••To avoid shrinking your clothes,
always consult and follow fabric care
instructions. Some fabrics will naturally
Garment
care
instructions
are
Clothes are shrinking. not being followed.
shrink when washed. Other fabrics can
be washed but will shrink when dried
in the appliance. Use a low or no heat
setting.
••Remove the lint from the lint filter
before every cycle. With the lint
removed, hold the lint filter up to a light
Lint filter has not been
to see if it is dirty or clogged. If it looks
cleaned properly.
dirty, follow the cleaning instructions.
With some loads that produce high
amounts of lint, it may be necessary to
clean the lint filter during the cycle.
•
•
Some fabrics are lint producers (i.e., a
Lint is left on clothes.
fuzzy white cotton towel) and should be
Laundry has not been sorted
dried separately from clothes that are
properly.
lint trappers (i.e., a pair of black linen
pants).
•
•
Divide extra large loads into smaller
Appliance is overloaded.
loads for drying.
Tissue, paper, etc., has been
••Check pockets thoroughly before
left in pockets.
drying clothes.
••Overdrying a load of laundry can cause
Clothes have dried for too
a buildup of static electricity. Adjust
long (overdried).
settings and use a shorter drying time,
or use Sensor Dry programmes.
Excess static in
clothes after drying.
••These fabrics are naturally more
Drying synthetics, permanent
prone to static buildup. Try using fabric
press, or synthetic blends.
softener, or use shorter Timed Drying
time settings.
30
EN
Symptoms
Water leaks.
Clothes have damp
spots after a Sensor
Dry programme.
Reason
The water container hose
or the drain hose is not
connected correctly.
The door is closed while
laundry or foreign substance
is caught in the door.
Very large load or very small
load. Single large item such
as a blanket or comforter.
Solution
••Connect the water container hose or
the drain hose correctly.
••Check if laundry or foreign substance
is caught in the door before using the
appliance. If water leaks continuously,
contact the LG Electronics Customer
Information Centre.
••If items are too tightly packed or too
sparse the sensor may have trouble
reading the dryness level of the load.
Use a Timed Drying programme for
very small loads.
••Large, bulky items such as blankets
or comforters can sometimes wrap
themselves into a tight ball of fabric.
The outside layers will dry and register
on the sensors, while the inner core
remains damp. When drying a single
bulky item, it may help to pause the
cycle once or twice and rearrange the
item to unwrap and expose any damp
areas.
••To dry a few remaining damp items
from a very large load or a few damp
spots on a large item after a Sensor
Dry programme has completed, empty
the lint trap, then set a Timed Drying
programme to finish drying the item(s).
31
EN
Error Codes
Symptoms
dE
tE1
tE3
32
Reason
The door has been opened
while the appliance is in
operation or the appliance is
being operated without the
door being closed properly.
Solution
••Close the door completely.
Temperature Sensor has
malfunctioned.
••Unplug the power plug and call for
service.
••If dE is not released, call for service.
WARRANTY
EN
THIS LIMITED WARRANTY DOES NOT COVER:
••Service trips to deliver, pick up, or install or repair the product; instruction to the customer on
operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or
correction of unauthorized repairs/installation.
••Failure of the product to perform during power failures and interruptions or inadequate electrical
service.
••Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines,
inadequate or interrupted water supply or inadequate supply of air.
••Damage resulting from operating the Product in a corrosive atmosphere or contrary to the
instructions outlined in the Product’s owner’s manual.
••Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of
God.
••Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the
intended purpose, or any water leakage where the product was not properly installed.
••Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial
or industrial use, or use of accessories, components, or consumable cleaning products that are not
approved by LG.
••Damage caused by transportation and handling, including scratches, dents, chips, and/or other
damage to the finish of your product, unless such damage results from defects in materials or
workmanship.
••Damage or missing items to any display, open box, discounted, or refurbished Product.
••Products with original serial numbers that have been removed, altered, or cannot be readily
determined. Model and Serial numbers, along with original retail sales receipt, are required for
warranty validation.
••Increases in utility costs and additional utility expenses.
••Repairs when your Product is used in other than normal and usual household use or contrary to the
instructions outlined in the Product’s owner’s manual.
••Costs associated with removal of your Product from your home for repairs.
••The removal and reinstallation of the Product if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions, including LG’s owner’s and installation
manuals.
••Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair
includes use of parts not approved or specified by LG.
••Noise or vibration that is considered normal, for example, water drain sound, spin sound or warning
beeps.
Filter is clogged.
- Not heating, long dry time
Clean the lint filter.
Improperly connected power
cord or electrical outlet issue.
- No power
- Not heating
Reconnect power cord, replace
house fuse or reset breaker. If
outlet is issue, electrician may
be required.
33
Memo
Memo
Download PDF