LG | GN-C660HLCU | LG GN-C552SGCN Owner’s Manual

ENGLISH
Owner ’s Manual
REFRIGERATOR
FREEZER
Please read carefully the manual instruction and safety caution
before operating your refrigerator and retain it for future reference
www.lg.com
P/No. : MFL69844912
Copyright © 2017 LG Electronics. All rights reserved
CONTENTS
IMPORTANT SAFETY INFORMATION ................ 3
INSTALLATION ........................................................ 11
INNER PARTS ........................................................... 12
OPERATIONS .......................................................... 22
Starting
Before Setting The Temperature
Door Alarm
Self Test
Controls For Refrigerator Compartment
Express Freeze
Lock (Optional)
Wi-Fi (Optional)
Hygiene Fresh (Optional)
Controls For Freezer Compartment
Ice Making
Vegetable Drawer
Defrosting
Door Cooling
Deodorizer (Optional)
Water Dispenser (Optional)
Home Bar (Optional)
SUGGESTIONS ON FOOD STORAGE ............... 29
CLEANING ................................................................. 30
GENERAL INFORMATION ................................... 32
LAMP REPLACEMENT .......................................... 32
IMPORTANT WARNINGS ..................................... 33
BEFORE CALLING FOR SERVICE ...................... 34
EARTH (GROUNDING) CONSTRUCTION
(OPTIONAL) ............................................................... 35
SMART FUNCTION ................................................. 36
SMART DIAGNOSIS................................................. 37
2
IMPORTANT SAFETY INFORMATION
WARNING
Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food storage compartment of the
appliance, unless they are of the type recommended by the manufacturer.
The refrigerant and insulation blowing gas used in the appliance require
special disposal procedures. When disposal, please consult with services
agent or a similarly qualified person.
This appliance contains a small amount of isobutane refrigerant (R600a),
natural gas with high environmental compatibility, but it is also combustible.
When transporting and installing the appliance, care should be taken to ensure
that no parts of the refrigerating circuit are damaged. Refrigerant squirting out
of the pipes could ignite or cause an eye injury. if a leak is detected, avoid any
naked flames or potential sources of ignition and air the room in which the
appliance is standing for several minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the
refrigerating circuit occurs, the size of the room in which the appliance
may be sited depends on the amount of refrigerant used. The room must be
2
1 m in size for every 8g of R600a refrigerant inside the appliance. The amount
of refrigerant in your particular appliance is shown on the identification plate
inside the appliance. Never start up an appliance showing any signs of damage.
if in doubt, consult your dealer.
3
IMPORTANT SAFETY INFORMATION
BASIC SAFETY PRECAUTIONS
This guide contains many important safety messages. Always read and obey all safety
messages.
This is the safety alert symbol. It alerts you to safety messages that inform you of hazard
that can hurt you or others or cause damage to the product. All safety messages will be
preceded by the safety alert symbol and the hazard signal word WARNING, or CAUTION.
These words mean:
WARNING
You will be hurt or seriously injured if you don't follow instructions.
CAUTION
indicates an imminently hazardous situation which, if not avoided, may
result in minor or moderate injury, or product damage only.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell
you what canhappen if the instructions are not followed.
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety
precautions should be followed, including the following.
Read all instructions before using this appliance.
1. When connecting the power
Do not use many power outlets.
Do not allow the power plug to face upward
or to be squeezed at
the back of the
refrigerator.
• Using several devices at
one outlet may cause fire.
• The electric leakage
breaker may damage food
and the dispenser may be
leaked.
Water may be flown into
or the plug may be
damaged, which causes
fire or electric shock.
Prevent the power cord from being
squeezed or imprinted if the refrigerator is
pushed in after the power plug is extracted
during the installation.
Do not allow the power cord bent or pressed
by the heavy object to
be damaged.
It may damage the power
cord to cause fire or
electric shock.
It becomes the cause of fire or electric shock.
4
IMPORTANT SAFETY INFORMATION
1. When connecting the power
Do not extend or modify the length of the
power plug.
Unplug the power plug when cleaning or
handling the refrigerator.
It causes electric shock or fire
by the electric damage of the
power cord or others.
• It may cause electric shock or injury.
Pull out the power plug not by grasping the
cord but the plug of its
end.
Remove water or dust from the power plug
and insert it with the ends of the pins
securely connected.
It may cause electric shock or
short circuit to fire.
Dust, water or unstable
connection may fire or
electric shock.
Do not pull out the cord or touch the power
plug with wet hands.
Wait for 5 minutes or longer when
reconnecting the plug.
• It may cause electric
shock or injury.
It may cause the operation
of the freezer to fail.
After
5minutes
Make sure of grounding.
When the power cord or the power plug is
damaged or the holes of
the outlet are loosed, do
not use them.
The incorrect grounding
may cause breakdown
and electric shock.
It may cause electric shock or
short circuit to make fire.
Ground
Wire
Copper
Flat
More than
30 inches
Be sure to use grounded exclusive proper
voltage consent for the power plug.
Be sure to use grounded extension consents
when extension consents are used.
may cause breakdown
It becomes the cause of fire.
5
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not place the heavy object or the
dangerous object
(container with liquid) on
the refrigerator.
It may be dropped to cause
injury, fire or electric shock when
opening or closing the door.
Prevent children from entering the product.
It may endanger the life of a
child if the child enters the
refrigerator.
Do not cling to the door or the shelves of the
door or the cool chamber.
It may make the refrigerator
fallen down or damage the
hands. Especially, do not
allow the children to do the
above.
Do not place flower vase, cup, cosmetics,
medicine or any container
with water on the
refrigerator.
It may cause fire, electric shock
or injury by dropping down.
Do not install the refrigerator in the wet
place or the place which
water or rain splashes.
Do not store the medicine or the academic
materials at the refrigerator.
When the material with
the strict temperature
control is stored, it may be
deteriorated or it may
make an unexpected
reaction to cause any risk.
Benzene
Deterioration of insulation of
electric parts may cause
electric leakage.
It may cause explosion
or fire.
The Academic
Medicine
dicine
The Me
6
Ether
Do not use or store inflammable materials
ether, benzene, alcohol, medicine, LP gas,
spray or cosmetics
near or in the
refrigerator.
Thinner
Opening and closing the door of the
refrigerator vigorously may cause the stored
food in the refrigerator basket to fall by
shock and hurt the foot, so take
precautions.
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not use drier to dry the inside, nor light a
candle to remove odor.
It may cause explosion or
fire.
Install in places away from the fire such as
the place where
flammable gas is
leaked.
It may cause fire.
Do not use the combustible spray near the
refrigerator.
It may cause fire.
Do not use the refrigerator if it has been
submerged in water
without having it checked
by a qualified electrician.
It may cause electric
shock or fire.
In case of thunder and lightning, or not in
use for a long
period of time,
detach the power
plug.
Deterioration of insulation of
electric parts may cause
electric shock or fire.
Thinner
There is a danger of
electric shock or fire.
Do not spray water at the outside or the
inside of the refrigerator or do not clean it
with benzene or
thinner.
When gas is leaked, do not touch the
refrigerator or the air outlet and ventilate the
room immediately.
Tempered glass is applied at the front door
(optional). It can be damaged by general
impact. Do not touch the broken part.
- The explosion by spark may cause fire or burn.
- Because this refrigerator uses natural gas as the
environtment-friendly refrigerant, even as small
amount is combustible. When the gas is leaked
by the severe damage during delivering,
installing or using the refrigerator, any spark may
cause fire or burn.
It may cause injury.
7
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not allow any person except the qualified
engineer to disassemble, repair or alter the
refrigerator.
It may cause injury,
electric shock or fire.
When any strange smell or smoke is
detected from the refrigerator, disconnect
the power plug
Down-block
office
Service
immediately and
center
contact to the
service center.
It may cause fire.
When disposing the refrigerator, remove the
packing materials from
the door.
Do not use the refrigerator for non-domestic
purpose (storing medicine or testing
material, using at the ship, etc.).
It may cause to lock out the
child.
It may cause an unexpected
risk such as fire, electric
shock, deterioration of
stored material or chemical
reaction.
Install the refrigerator on the solid and level
floor.
What to do with your old refrigerator,
Your refrigerator contain liquid (refrigerant,
Installing it on the unstable
place may cause death by
falling down the refrigerator
when opening or closing the
door.
Do not insert the hands or the metal stick
into the exit of cool air, the cover, the bottom
of the refrigerator, the heatproof grill
(exhaust hole) at the
backside. It may
lubricant) made of recylable
materials. All these materials
must bes sent to a recycling
waste disposal site as they can
be reused after a specific
recycling process. Refrigerator
Contact local authoritie.
Completely empty inside before taking out
the container from the door.
cause electric
shock or injury.
8
IMPORTANT SAFETY INFORMATION
2. When using the refrigerator
Do not remove the cover
on the back.
Place all the components in the right places
before connecting the power.
OK
Do not use an Adapter
on the back.
Never leave lit candles or incense on the
fridge, at risk of
causing fire or
product damage.
CAUTION
Violating this direction may cause injury or damage house or furniture. Always be careful, please.
Do not touch food or containers at the
freezer with wet
hands.
It may cause frostbite
Do not put bottle in the freezer.
It may freeze the contents
to break the bottle to cause
injury.
Carry the refrigerator with the handle bar at
the bottom of the front and the top of the
rear.
Otherwise, your hands
may be slipped to cause
injury.
Because the product is
heavy, carrying it alone
may hurt people or
accidents may occur.
Do not place the food in disorder inside the
refrigerator.
The food may fall during opening and closing the door
of the refrigerator and hurt people.
Do not insert the hands into the bottom of
the refrigerator.
The iron plate of the bottom
may cause injury.
Because opening or closing the door of the
refrigerator may cause injury to the person
around it, be careful, please.
Opening or closing the
door may cause feet or
hands to be caught in
the chink in door or the
child to be get hurt by
the corner.
9
IMPORTANT SAFETY INFORMATION
Do not use the carbonated water. The gas
d
pressure may cause
te
na r
bo ate
r
leakage.
a
C W
Do not put any living animal in the
refrigerator.
It may cause the animal
died.
Water Tank
ts
Produc
for steel
Do not use products such as grinding
sponge, brush, iron, or even special
products to clean stainless steel, soap
products such as alcohol, kerosene,
gasoline, wax, or solvent, or strong
chemicals such as chlorine, detergent, or
vinegar, for the purpose of gloss. These
products may damage the protective
lacquer, and
they may
cause risk or
stain on the
Strong
Chemicals
surface of the
refrigerator.
Clean the water tank according to the
instruction before using the Water Dispenser
Water Tank
Fill with potable water only.
Do not apply oil in the door connection part
in any circumstances. It may cause damage
to the plastic
parts.
Avoid the contact of oil or fat on the plastic
parts. They may cause damage.
When the power cord is damaged, let a
technician to replace
it to remove the
danger of an
accident.
Technician
Do not lean on the doors, Hinges may
deregulate
Themselves, harming
seal cooler and
compromising
performance.
oil
Use only water. If any other liquid is used,
the operation of the system may be
deteriorated. If a problem occurs by using
any liquid other than
water, the
Only water
manufacturer will not
be responsible.
Water Tank
Do not store excessive water bottle or side
dish container, etc. in the door basket.
It will make you put excessive force to take
out the water bottle or side dish container
from the basket, and it may damage the
basket or it may cause injury of your hand
hitting the surrounding structure.
WARNING
Please do not use a dishwasher to clean the lower drawers; the high temperature may cause
damage to the baskets which make them unusable.
10
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to
use.
2.Avoid placing the unit near heat sources,
direct sunlight or moisture.
3. Air must circulate properly around your
NEXT
1. Clean your refrigerator thoroughly and wipe
off all dust accumulated during shipping.
2. Install accessories such as ice cube box, etc.,
in their proper places. They are packed
together to prevent possible damage during
shipment.
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inches (25 cm) or 3. Connect the power supply cord (or plug) to
the outlet. Don't double up with other
greater clearance above the refrigerator and 2
appliances on the same outlet.
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
4. Prior to storing food, leave your refrigerator
(2.5 cm) from the floor, especially if the floor is
on for 2 or 3 hours.
carpeted.
Check the flow of cold air in the freezer
compartment to ensure proper cooling.
4. To avoid vibrations, the unit must be level.
Your refrigerator is now ready for use.
If required, adjust the leveling screws to
compensate for unevenness of the floor.
The front should be slightly higher than the
rear to aid in door closing.
Leveling screws can be turned easily by
tipping the cabinet slightly.
Turn the leveling screws clockwise(
) to
raise the unit, counterclockwise(
) to
lower it.
5. Don't install this appliance below 5°C. It may
cause the debasement of the refrigerator.
11
INNER PARTS
INTERNAL CONTROLLER MODEL TYPE A
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
(Optional)
Refrigerator Door
Rack
Door Cooling
Egg Tray
Refrigerator
Temperature Control
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
12
INNER PARTS
INTERNAL CONTROLLER MODEL TYPE B
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Refrigerator Door
Rack
Lamp
Deodorizer
Door Cooling
(Optional)
Fresh Zone
Door Cooling
Egg Tray
Refrigerator
Temperature Control
Shelves
Refrigerator Door
Rack
(Optional)
(Optional)
Hygiene Fresh
(Optional)
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
13
INNER PARTS
INTERNAL CONTROLLER MODEL TYPE C
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
(
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
) (Optional)
Refrigerator Door
Rack
(Optional)
Pull Out Tray
Door Cooling
Refrigerator
Temperature Control
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Vegetable Drawer
Egg Tray
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
14
INNER PARTS
INTERNAL CONTROLLER MODEL TYPE D
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
(
REFRIGERATOR
COMPARTMENT
) (Optional)
Lamp
Deodorizer
(Optional)
Pull Out Tray
Refrigerator Door
Rack
Door Cooling
Refrigerator
Temperature Control
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Hygiene Fresh
(Optional)
Egg Tray
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
15
INNER PARTS
EXTERNAL CONTROLLER MODEL TYPE A
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Refrigerator Door
Rack
Lamp
Deodorizer
Door Cooling
(Optional)
Fresh Zone
Door Cooling
Egg Tray
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Hygiene Fresh
(Optional)
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
16
INNER PARTS
EXTERNAL CONTROLLER MODEL TYPE C
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
(
Lamp
Deodorizer
) (Optional)
Refrigerator Door
Rack
(Optional)
Fresh Zone
Door Cooling
Shelves
Refrigerator Door
Rack
(Optional)
(Optional)
Hygiene Fresh
(Optional)
Egg Tray
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
17
INNER PARTS
DISPENSER MODEL TYPE A
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Lamp
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
Water Tank
(Optional)
Fresh Zone
Egg Tray
Door Cooling
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Hygiene Fresh
(Optional)
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
18
INNER PARTS
DISPENSER MODEL TYPE D
FREEZER
COMPARTMENT
Smart Diagnosis
Freezer Temperature
Control Dial
Freezer Door Rack
Shelf
Twisting Ice Serve
Type Ice Making
(
) (Optional)
Freezer Door Rack
(
REFRIGERATOR
COMPARTMENT
Lamp
Deodorizer
) (Optional)
Water Tank
(Optional)
Pull Out Tray
Refrigerator Door
Rack
Door Cooling
Refrigerator
Temperature Control
Refrigerator Door
Rack
(Optional)
Shelves
(Optional)
Hygiene Fresh
(Optional)
Egg Tray
Vegetable Drawer
Levelling Screw
NOTE
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
19
INNER PARTS
DOOR IN DOOR MODEL TYPE A
Smart Diagnosis
(
)
Deodorizer
(Optional)
Door Cooling
Home Bar
(Optional)
NOTE
(Optional)
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
20
INNER PARTS
DOOR IN DOOR MODEL TYPE C
Smart Diagnosis
(
)
(
) (Optional)
Deodorizer
(Optional)
Door Cooling
Home Bar
(Optional)
NOTE
(Optional)
- This guide covers several different models. The refrigerator you have
purchased may have some or all of the features shown above.
- To keep a position of inner parts like as baskets, drawers and shelves
supplied by manufactureris the most efficient usage for energy saving.
SUGGESTION FOR ENERGY SAVING
- Please do not keep the door open for a long time, close door in the shortest time.
- Too much food are not advised to be put in. Enough space should be kept for cool air circulating freely.
- Do not set the temperature of refrigerator lower than needed. Do not put the food near the temperature
sensor.
- Allow hot food to cool prior to storing. Placing hot food in the fridge-freezer could spoil other food, and
lead to higher electric bills.
- Do not block air vents with food. Smooth circulation of cold air keeps fridge-freezer temperature even.
- Do not open the door frequently. Opening the door lets warm air enter the fridge-freezer, and cause
temperature to rise.
21
OPERATIONS
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
BEFORE SETTING THE TEMPERATURE
The temperature of the refrigerator is kept constant regardless of changes in room temperature.
It is recommended that, once set, the temperature settings(the controls for the refrigerator and
freezer compartments) not be changed unless necessary.
● This refrigerator has one temperature control button for the refrigerator compartment and one
temperature control dial for the freezer compartment.
● The default setting of the temperature control button for the refrigerator compartment is ‘3°C’.
(for external controller model),
● The default setting of the temperature control dial for the freezer compartment is '3'.
● This refrigerator has a temperature sensor in the refrigerator compartment. It will start and stop
the compressor automatically as needed.
●
DOOR ALARM
When the door of the refrigerator or the freezer is open for 1 minute, an alarm will sound three times.
It the door remains open, the alarm will repeat every 30 seconds.
SELF TEST
●
●
Your refrigerator contains a built in diagnostic capability. If it develops a malfunction in certain areas,
it will display an error code to assist the repair technician. While an error code is displayed, other
control and display functions will not operate.
If an error code is displayed, contact a service center. Do not disconnect the power cord from
the outlet.
CONTROLS FOR REFRIGERATOR COMPARTMENT
FOR INTERNAL CONTROLLER MODEL
The default setting of the temperature control button for
the refrigerator compartment is NORMAL.
To control the refrigerator temperature, press the REF.
TEMP CONTROL button.
Whenever pressing the button, LED emitting the light.
The temperature is set in 7 steps, from Cold to Coldest
cooling.
22
OPERATIONS
FOR EXTERNAL CONTROLLER MODEL
Display graphic can be different, depend on the type of your refrigerator.
a
b
●
Touch 'Fridge' button to control refrigerator temperature.
Whenever touching the button, the LED emits light.
Touch ‘Hygiene Fresh’ button to operate hygiene motor (optional).
The number showing up on the LED luminesce indicate the temperature of refrigerator compartment.
●
You can select the desired setting point seven steps, from '0 C' to '6oC'.
●
●
●
o
- Touch ⓐ button, Fridge temperature will be down each 1o C.
- Touch ⓑ button, Hygiene Fresh motor will be on, power mode, off (optional).
EXPRESS FREEZE
●
The Express Freeze feature operates
when the refrigerator first turn on.
The compressor and circulating fan
operate at maximum cooling capacity to
quickly lower the refrigerator temperature.
It shuts off automatically.
●
If warm food is placed into the refrigerator, Express Freeze can be started with the button
on the control panel. Express Freeze will shut off when the temperature reaches
the proper level or it can be shut off manually by touching the Express Freeze button.
LOCK (OPTIONAL)
LOCK
Touch and hold the Lock button
for 3 seconds to lock the Lock.
When it is locked, the Lock LED will be on
and the other button will not operate. To
unlock, touch and hold the Lock button
for 3 seconds again.
●
23
OPERATIONS
Wi-Fi (OPTIONAL)
This sets the refrigerator to connect to your home's Wi-Fi network.
HYGIENE FRESH (OPTIONAL)
w CAUTION
Before installing or using the product, make sure to read the owner's manual carefully to use the product
accurately as intended. This HYGIENE FRESH filter has the antibacterial function of removing the virus
or bacteria inside the refrigerator and the deodorizer function to remove the scent.
The function has tested and has been certificated by authorized institutions Intertek
●
Switch over to use mode
Switch over to use mode.
button on the display panel on the front side
• To use the HYGIENE FRESH filter, touch the
of the door and switch over to the AUTO or POWER mode.
(Whenever you press the button, the HYGIENE FRESH filter will be switched to AUTO
POWER
OFF
AUTO .)
AUTO
POWER
OFF
AUTO
w CAUTION
When the user switches to AUTO or POWER mode, the LED around the filter is also turned on. Open
the door to check whether the LED around the filter is also turned on. Do not put in your finger or alien
particles inside the fan. It can be caused of an injury or malfunction.
w CAUTION
• Do not wash the HYGIENE FRESH filter by using water because It can be caused of malfunction.
• This filter may not be effective for all types of bacteria and virus.
• This is effective to remove the bacteria which is not on the food in the refrigerator.
24
OPERATIONS
CONTROLS FOR FREEZER COMPARTMENT
Depend on your product
5
3
5
3
5
6
<Type A & B>
5
4
<Type C & D>
To lower the temperature in the freezer, turn the knob right and set to a higher number.
To raise the temperature in the freezer, turn the knob left and set to a smaller number.
●
When the freezer compartment is not cold enough in winter, adjust the control for the freezer to High
( 6 ~ 7 ).
●
Knob 7 is for quick freezing in the freezer compartment. The refrigerator can be operated
continuously or the refrigerator compartment can be warmer. When the quick freezing is finished,
please return to set the Knob at Normal.
●
. Setting the Freezer Knob at NORMAL will have
Setting the Freezer Knob at 7 will satisfy
sufficient freezing effect, so it is recommended to set the Knob at NORMAL.
●
Refrigerator temperature would be warmer when the Freezer temperature set to be colder.
ICE MAKING
Twisting Ice Serve Type
●
To make ice cubes, fill the ice tray with water and
insert in its position.
●
To remove ice cubes, hold the lever of the tray and
pull turn gently. Then, ice cubes drop in to the ice
cube box.
Ice Trays
NOTE
You can disassemble the Ice Maker to
secure space in the freezer.
• Twisting Ice Serve Type:
1. Ice Tray
2. Ice Cube Box.
Ice Cube Box
Remove 1 and 2
.
1
2
WARNING
• Do not use anything other than water.
• Fill the water up to the marked line..
<Twisting Ice Serve Type>
25
OPERATIONS
VEGETABLE DRAWER
How to use
Vegetable drawer can be used through the control of knob.
Check the position of knob prior to store the food.
● Do not locate the knob on the middle point.
●
●
DEFROSTING
●
Defrosting takes place automatically.
●
The defrosted water flows down to the evaporating tray which located in
the lower back side of the refrigerator and is evaporated automatically.
DOOR COOLING (OPTIONAL)
The anion coating in the duct cover purifies the air
and helps stored foods remain fresh longer.
If water of foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition,
if gasket is damaged, efficiency may be lowered owing to
the escape of cool air.
DEODORIZER (OPTIONAL)
●
Unpleasant odor of food in fresh food
compartment is deodorized with no harm to
you and the food.
How to use
• As Deodorizer is located in cooling air inlet for circulating air in fresh food compartment, there is
no need for any handling.
• Do not prick the cooling air inlet with a sharp tip because Deodorizer may be damaged.
• When storing food with a strong odor, wrap it or store it in a container with a lid because odor may be
passed on to other foods.
Re-Using of Deodorizer
• Used some length and the odor is strong,
Deodorizer can be revived and re-used.
• Separate Deodorizer in ceiling of refrigerator
compartment, using hair drier to remove
moisture or malodor and oxidize under sunlight
to decomposing malodor by ultraviolet.
REF. TEMP
. CONTROL
MIN
26
MAX
OPERATIONS
WATER DISPENSER (OPTIONAL)
NOTE
●
●
●
Put water after the water tank being in position. Necessarilly separate the water tank to
clean it or not use it.
When the water tank is not position after filling it with water, water can leak out by the
valve pushed.
Cover Cap
Putting water in the water tank
1. Open the cover cap and pour water into the
water tank.
2. Close the cover cap.
3. The water tank is optional removable part
which can be applied to enlarge the storage
capacity.
You can store food, drinks after removing
the water tank cover.
Caution
Do not use anything other than water including.
Hot water needs to be cooled before being put
in the water tank.
ER
AT
W
PU
●
Drinking
1. Press the dispenser pad with cup.
2. The water is released when the dispenser pad is
pressed. The pad returns to its original position when
the cup is removed and the water stops its flow.
27
SH
HOME BAR (OPTIONAL)
How to use Home Bar
Press the button at the top left side of Home Bar
until “click” sounds.
You can use various storage spaces inside Home
Bar to systematically store food.
Do not use the button to close Home Bar.
Store food that is frequently taken out and used.
You don’t have to open the door and it saves
electricity.
LED lamp is turned on for easy taking out of the
contents when Home Bar is open.
Do not hang on Home Bar for safety reasons.
Press until
“click” sounds
How to disassemble Home Bar basket
1
2
1. If you lightly lift and take out the basket,
the basket is hooked into the grooves at
the left and right side of the drawer.
2. At this time, hold the both ends of the
basket, lift with force to separate one side,
and separate the other side.
How to assemble Home Bar basket
2
1
1. P
lace the basket on the guide and push
in to be hooked into the wide groove.
2. At this time, hold both ends of the basket,
insert one side with force, and assemble
the other side.
Caution Please follow the guidelines. Otherwise, it may be damaged.
How to disassemble Home Bar cover
Lift Home Bar cover upward and pull to separate and take out.
Caution Before the disassembly, take out all food to
empty inside the refrigerator.
28
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
●
●
●
●
●
●
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an
important factor in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, pineapples,
and melons.
Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other
food, and lead to higher electric bills!
When storing the food, cover it with vinyl wrap or store in a container with a lid. This prevents
moisture from evaporating, and helps food to keep its taste and nutrients.
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator temperatures
even.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator, and
cause temperatures to rise.
FREEZER COMPARTMENT
●
●
●
●
Do not store bottles in the freezer compartment - they may break when frozen.
Do not refreeze food that has been thawed. This causes loss of taste and nutrition.
When storing frozen food like ice cream for a long period, place it on the freezer shelf, not in
the door rack.
Loading for Freezing - It is recommended to load newly introduced foods on the following
position for freezing:
Newly Introduced Food
●
Freezer Door Basket, marked (
storage of frozen food (optional).
) is -12°C compartment, that is suitable for short term
REFRIGERATOR COMPARTMENT
●
Avoid placing moist food on deep interior refrigerator
shelves, it could freeze upon direct contact with chilled
air. To avoid this it is better to store food in the covered
container.
●
It is desirable to store moist food (especially vegetable
and fruit) in the vegetable storage compartment. If it is
necessary to store on a shelf of the refrigerator, put it
close to the door away from the back wall of the
refrigerator to avoid being frozen by the cool circulating in the refrigerator.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped,
and packed food should be wiped clean, to prevent adjacent food from spoiling.
●
●
When storing eggs in their storage rack, ensure that they are fresh, and always store them
in a up-right position, which keeps them fresh longer.
29
CLEANING
It is important that your refrigerator be kept clean
to prevent undesirable odors. Spilled food should
be wipe up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes,
coarse abrasive cleaners or strong alkaline
solutions on any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet
or damp hands.
INTERIOR PARTS - Wash compartment shelves,
door racks, storage trays and magnetic door
seals etc. Use a lukewarm solution of mild
soap or dish washable solution to clean
the inner lining of your refrigerator. Wipe with
a clean damp cloth and then dry.
WARNING
Always remove power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts(lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or
EXTERIOR - Use a lukewarm solution of mild
cloth to prevent water or liquid from getting
soap or dish washable solution to clean the
into any electrical part and causing electric
durable finish of your refrigerator. Wipe with a
shock. Do not use flammable or toxic cleaning
clean, damp cloth and then dry.
liquids.
• Do not use : Surface
For products with a stainless steel exterior, use a clean
sponge or soft cloth and a mild Detergent in warm water. active agents, Car wax, Anticorrosive, or any kind
of oil, Gasoline, Acids, Wax.
Do not use abrasive or harsh cleaners. Dry thoroughly
• Only use dish washable
with a Soft cloth. Do not use appliance wax, bleach, or
solution, and soapy water when cleaning.
other products containing chlorine on stainless steel.
•
Using harsh cleaning chemicals will cause the
INTERIOR - Regular cleaning of the interior and
external finishes to change colour.
interior parts is recommended. Use a lukewarm
solution of mild soap or dish washable solution to
clean the durable finish of your refrigerator. Wipe
with a clean, damp cloth and then dry.
30
CLEANING
WATER DISPENSER (OPTIONAL)
Grille -
ER
AT
W
PU
SH
Wipe with a wet cloth, and dry with a dry cloth.
Water Tank 1. Putting the Water
Is not necessary to remove the water tank in order to supply
it (it could be filled like shows fig. 1 pulling the tank gate).
NOTE
- Before closing door, close the cap and clamp tightly.
- Do not use liquids containing sugar or carbonated drinks like soda
2. Disassembly
Lift the water tank, gripping a side and bottom of water tank.
NOTE
When disassemble Water Tank, use all water inside dispenser first.
3. Assembly
If by some cause removes the water tank, place again the water
tank on its original position. Verify that the valve assembly
correctly in the hole of the door (fig. 3,4). Once assembled push
down and check the tank position with line.
Water Tank 1. Remove the tank cover.
3. Clean the inside and outside of the cap
with diswashing detergent and rinse
throughly under running water. Dry the water
with a cloth.
2. Clean the inside and outside of the water tank
with diswashing detergent and rinse
throughly under running water. Dry the water
with a cloth.
Caution
1. Use lukewarm water when cleaning.
2. Do not use anything other than water. If it is
used with soft drinks,put water in the water
tank and discharge three or four cups of
water shortly.
31
GENERAL INFORMATION
VACATION TIME
ANTI-CONDENSATION PIPE
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.
The outside wall of the refrigerator cabinet may
sometimes get warm,
especially just after
installation.
Don't be alarmed.
This is due to the anticondensation pipe, which
pumps hot refrigerant to
prevent "sweating" on the
outer cabinet wall.
POWER FAILURE
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice on
top of your frozen packages.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.
This appliance is intended to be used in
household and similar applications such as:
- Staff kitchen areas in shops, offices and
other working environments.
- Farm houses and by clients in hotels, motels
and other residential type environments.
- Bed and breakfast type environments.
- Catering and similar non-retail applications.
LAMP REPLACEMENT
NOTE
●
This product applies LED Lamp which can not be replaced by the user.
Please contact authorized service centre for the lamp replacement.
32
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
ABOUT GROUNDING (EARTHING)
If possible, connect the refrigerator to its own
individual electrical outlet to prevent it and other
appliances or household lights from causing an
overload that could cause a power outage.
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in
an electric shock. Consult a qualified electrician
or service person if the grounding instructions
The refrigerator-freezer should be so positioned that
are not completely understood, or if you have
the supply plug is accessible for quick disconnection
doubts on whether the appliance is properly
when accident happens.
grounded.
ACCESSIBILITY OF SUPPLY PLUG
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
VERY DANGEROUS ATTRACTION
DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH.
It will cause electric shock
or fire.
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
An empty refrigerator can be a dangerous
attraction to children. Remove either gaskets,
latches, lids or the entire door from your
unused appliance, or take some other action
to make it harmless.
Do not store inflammable materials, explosives
or chemicals in the refrigerator.
Do not store explosive substances such as aerosol cans with a flammable propellant in this
appliance.
WARNING
This appliance is not intended for use by person (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
DISPOSAL OF THE OLD APPLIANCE
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are
reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be
reused after rework (recycling). For take back, please contact with the local agency.
33
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE
POSSIBLE CAUSES FIRST :
PROBLEM
POSSIBLE CAUSES
REFRIGERATOR DOES
NOT OPERATE
●
REFRIGERATOR OR FREEZER
COMPARTMENT TEMPERATURE
TOO WARM
●
ABNORMAL NOISE(S)
REFRIGERATOR
HAS ODOR
DEW FORMS ON THE
CABINET SURFACE
●
Has a house fuse blown or circuit breaker tripped?
Has the power cord plug been removed or loosened
from the electrical wall outlet?
Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
● Warm weather-frequent door openings.
● Door left open for a long time.
● Large amount of foods are kept in the refrigerator.
●
Refrigerator is installed in a weak or uneven place, or
leveling screw needs adjusting.
● Unnecessary objects placed in the back side of the
refrigerator.
●
Foods with strong odors should be tightly covered or
wrapped.
● Interior needs cleaning.
●
●
●
Not unusual during periods of high humidity.
Door may have been left ajar.
34
EARTH (GROUNDING) CONSTRUCTION (OPTIONAL)
It is recommended to install the earth wire to prevent electric shock
in case of electricity leakage.
How to connect the earth wire:
• Connect the earth wire's metal ring end to the earth screw
on the back of the refrigerator.
• Peel off the cable sheath/insulation at the other end of the earth wire. Attach the peeled wire
to a metal screw/nail and then drive it through the wall or ground.
Do not connect the earth wire to the following locations.
• Gas pipe
It could produce sparks which lead to fire and explosion.
• Telephone earth wire and lightning rod
It is dangerous during lightning.
• Water pipe and water tap
The earth wire connection will not work when the middle of the water pipe is made of plastic.
If it is connected to a metal water pipe, it could cause someone to be electrocuted.
When installing the product in a humid or wet location, you must install the earth wire.
Ex) • Unfloored or dirt floored room (Room with dirt and no floor), concrete floor
• Location where it can get wet such as near the sink
• Location where water can leak or is humid such as basement
• Other wet or humid location
Especially, for locations where it always get wet such as near the restaurant sink, you are obligated by
the law to install a circuit breaker in addition to the earth wire.
After consulting with your retailer or electric construction company, you must do the earth wire
construction (Type 3 earth construction). Please note that earth construction could incur extra fees.
35
SMART FUNCTION (Only for applied models)
Using Smart ThinQ
Application
• The application is subject to change for
appliance improvement purposes without
notice to users.
• Functions may vary by model.
Installing Smart ThinQ
Search for the LG Smart ThinQ application from
the Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for three (3) years from the date on
which you purchased the product.
Wi-Fi Function
• For appliances with the
or
logo
Communicate with the appliance from a smart
phone using the convenient smart features.
Firmware Update
Keep the appliance performance updated.
Smart Diagnosis™
If you use the Smart Diagnosis function, you will
be provided with the useful information such as
a correct way of using the appliance based on
the pattern of use.
Smart Diagnosis™ Using a Smart
Phone
Settings
• For appliances with the
or
logo
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails.
Smart Diagnosis™ can not be activated
unless the appliance is connected to power.
If the appliance is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.
Allows you to set various options on the
refrigerator and in the application.
NOTE
• To verify the Wi-Fi connection, check that Wi-Fi
icon on the control panel is lit.
• LG Smart ThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
• The machine supports 2.4 GHz Wi-Fi networks
only.
• If the appliance is having trouble connecting
to the Wi-Fi network, it may be too far from
the router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
• The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
• The network connection may not work properly
depending on the internet service provider.
• The surrounding wireless environment can
make the wireless network service run slowly.
36
SMART DIAGNOSIS (Only for applied models)
FOR INTERNAL CONTROLLER MODEL
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
First, call to the LG service center. Only use the Smart Diagnosis feature when instructed to do so by
the LG call center agent.
1. Open the refrigerator (lower) door.
NOTE
2. Press the refrigerator temperature control
button for 3sec or more.
• Position the phone so that its microphone is
aligned with the speaker hole.
• The Smart Diagnosis™ sound is generated
after around three seconds.
• Do not take the phone off the speaker hole
while the data is transmitted.
• Hold the phone to the upper right speaker hole
and wait while the data is transmitted.
• The data transfer sound may be harsh to the
ear while the Smart Diagnosis™ data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the
data transfer sound has stopped.
3. If the buzzer sounds 4 times, open the Freezer
(upper) door and place the phone near the
speaker hole.
Check if the speaking side(microphone) of the
telephone is toward the speaker hole.
• When the data transfer is complete, the
transfer completion message is displayed and
the control panel is automatically turned off
and then on again after a few seconds. After
the customer information centre explains the
diagnosis result.
• The Smart Diagnosis™ function depends on
the local call quality.
• The communication performance will improve
and you can transmit a better signal if you use
a land line home phone.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
4. Do not take away the telephone while data is
being transmitted.
During the data transmission for smart diagnosis,
wait with the telephone placed near the speaker
hole at the top right side.
w CAUTION
The transmission sound may be irritating.
Do not take away the telephone until the sound
stops for good diagnosis.
5. After the completion of the data transmission,
listen to the explanation of the consultant
about the result of the smart diagnosis.
When the data transmission is completed, along
with the display of the data transmission
completion, the refrigerator will be automatically
turned off and on a few seconds later.
Listen to the explanation of the consultant about
the result of the analyzed diagnosis and follow the
instructions.
37
SMART DIAGNOSIS (Only for applied models)
FOR EXTERNAL CONTROLLER MODEL
Smart diagnosis function is...
Use the function to contact the service center and receive precise diagnosis when the refrigerator
malfunctions or fails. Use it only to connect to the consultant and do not use it in normal times.
How to use the function
First, call to the LG service center. Only use the Smart Diagnosis feature when instructed to do so by
the LG call center agent.
Caution
1. Close all refrigerator doors, and touch
and hold display lock button to make it
■ The transmission sound may be irritating.
locked state.
Do not take away the telephone until the
If the display is already in locked state,
sound stops for good diagnosis.
touch and hold lock button to reset the lock and
touch and hold the lock button again to make it
locked state.
Caution
■
If it passes 5 minutes in locked state, smart
diagnosis function will not be activated, so
be careful.
2. Touch and hold fridge temperature button
for 3 seconds or longer.
(All display screens will be turned off,
and in a while, 3 will be displayed on the
fridge temperature display part.)
3. Open all refrigerator compartment and
freezer compartment doors, and place
the telephone near the speaker hole at
the top right side.
Check if the speaking side(microphone) of
the telephone is toward the speaker hole.
4. Do not take away the telephone while
data is being transmitted.
During the data transmission for smart
diagnosis, wait with the telephone placed
near the speaker hole at the top right side.
The remaining time for data transmission is
displayed on the display screen.
5. After the completion of the data
transmission, listen to the explanation
of the consultant about the result of the
smart diagnosis.
When the data transmission is completed,
along with the display of the data transmission completion, the refrigerator will be automatically turned off and on a few seconds
later.
Listen to the explanation of the consultant
about the result of the analyzed diagnosis
and follow the instructions.
NOTE
• Position the phone so that its microphone is
aligned with the speaker hole.
• The Smart Diagnosis™ sound is generated
after around three seconds.
• Do not take the phone off the speaker hole
while the data is transmitted.
• Hold the phone to the upper right speaker hole
and wait while the data is transmitted.
• The data transfer sound may be harsh to the
ear while the Smart Diagnosis™ data is being
transmitted, but do not take the phone off the
speaker hole for accurate diagnosis until the
data transfer sound has stopped.
• When the data transfer is complete, the
transfer completion message is displayed and
the control panel is automatically turned off
and then on again after a few seconds. After
the customer information centre explains the
diagnosis result.
• The Smart Diagnosis™ function depends on
the local call quality.
• The communication performance will improve
and you can transmit a better signal if you use
a land line home phone.
• If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
38
Importer Address
Count ry
Trade Name/ Address
W/H Address
LG Electronics Gulf
LG Electronics Gulf Fze,
GF-Jebel Ali Main Warehouse, Jebel
GF-Jebel Ali Main Warehouse, Jebel Ali Free Zone,
Ali Free Zone,
P.O. Box : 61445 Dubai, UAE
P.O. Box : 61445 Dubai, UAE
Al Yousuf LLC, logistics centre,
UAE
Near Ras Al Khor customs, 3rd R/A, Aweer, Dubai,
AL YOUSUF ELECTRONICS (LLC)
UAE
PB#25, AL Yousuf Bldg, Al Quoz,
Al Yousuf LLC, Main office and central logistics
Dubai
centre,
JAFZ Near R/A No.13, P.O.Box 25, Dubai, UAE
A.J.M. KOOHEJI GROUP B.S.C (C)
AJM Kooheji Group, BLDG no. 96, Road No.3402
Bahrain P.O. BOX 74, MANAMA KINGDOM
BLOCK 634.
OF BAHRAIN
Kingdom of Bahrain
Oman
Qatar
Kuwait
Yemen
OMAN GULF ENTERPRISES LLC
P.O. BOX 421, CODE 118
SULTANATE OF MUSCAT OMAN
Ruwi : 24793072; Wattayah:
22307000. C.R. No.: 1/33586/3
OTE Logistics Center,
Near Isuzu / Cadilac Showroom, Near Old Ghala
Round about, P.O Box 175, P.C.117 ,Muscat.
Video Home & Electronics Centre,
street No.35, Industrial area, Sanaiya, Doha Qatar,
P.O.Box : 4668
Video Home & Electronics Centre,
Street No.36, Industrial area, Sanaiya, Doha Qatar
VIDEOHOME AND ELECTRONICS
P.O.Box : 4668
CENTRE WLL
Video Home & Electronics Centre,
PO BOX 4668, DOHA QATAR
Street No.38, Industrial area, Sanaiya, Doha Qatar
P.O.Box : 4668
Video Home & Electronics Centre,
Street No.39, Industrial area, Sanaiya, Doha Qatar
P.O.Box : 4668
Al Babtain Electronics,
AL-BABTAIN ELECTRONICS
Al Ardiya Industrial area, Block 1, Plot 150-151,
COMPANY WLL Al Babtain
P.O Box 599, SAFAT 13006 KUWAIT Kuwait , P.O Box: 599 (Safat-13006)
Jool Mas'hah SALEM MOHAMMED SHAMMAKH Main Street , Beside Hino workshop, Al-Mukalla
& CO.
Khor Maksar,
PO BOX 3372, HODEIDAH
Embassies Area, In-front of UN Office, Aden
REPUBLIC OF YEMEN
Sana'a street, Behind JUMAAN STORES, Al-Hai AlTigary , Beside Al-Shaba Garden, Hodeidah
Factory Address
Indonesia PT. LG Electronics Indonesia
Jl. Tabri No. 1, Cirarab, Legok, Tangerang 15820,
Indonesia
Download PDF

advertising