LG | GR-151SU.ASWFNGI | LG GR-151SU.ASWFNGI Owner’s Manual

REFRIGERATOR
OWNER'S MANUAL
GR-151SU
PLEASE
READ THIS OWNER'S MANUAL THOROUGHLY
BEFORE OPERATING AND KEEP IT HANDY
FOR REFERENCE AT ALL TIMES.
INSTALLATION
.....................................................
FEATURE CHART
OPERATION
................................................
.....................................................
2
3
4~5
Starting
Temperature
Ice
Control
Making
Defrosting
SUGGESTIONS ON FOOD STORAGE
CAN SERVER
CLEANING
................
...................................................
6~7
............................................................
GENERAL INFORMATION
IMPORTANT WARNINGS
...................................
.....................................
REPOSITIONING THE DOOR
HINGE(Option)
BEFORE CALLING FOR SERVICE
SPECIFICATIONS
...
5
8
8
9
10~11
....................
...............................................
12
13
P/No. 3828JD8497F
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지2
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT
CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR
REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR
INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select
a
good location.
refrigerator where
Place your
2. Avoid
placing the unit
sunlight or moisture.
near
it is easy to
5. Clean your refrigerator thoroughly and
all dust accumulated during shipping.
use.
heat sources, direct
6. Install accessories such
more
The
the
and 2 inches
the
or
should be elevated 1 inch from
vibrations, the unit
refrigerator
must be level.
Your
required, adjust the leveling screw to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screw can be turned easily by tipping
the cabinet slightly.
Turn the leveling screw clockwise to raise the
on
the
cooling.
refrigerator is now ready
ensure
If
unit, counterclockwise
outlet.
Check the flow of cold air
floor, especially if it is carpeted.
4. To avoid
same
8. Prior to use, leave your
hours.
from the wall.
refrigerator
tray, shelf, etc.,
7. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
If your refrigerator is placed in a recessed area
in the wall, allow at least a 10 inch or greater
refrigerator
ice
off
in their proper places.They are packed together
to prevent possible damage during shipment.
3. There must be proper air circulation around
your refrigerator to keep it operating efficiently.
clearance above the
as
wipe
on
for 2
evaporator
or
to
proper
for
use.
9. When you put in a power cord, please refer to
the label situated on the back plate in order to
classify the rating.
to lower it.
2
3
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지3
FEATURES CHART
Evaporator
Collects water
Drip Tray
during defrosting
Thermostat Dial
Ice
For
controlling the
temperature in
the refrigerator.
Tray
Door Rack
Shelves
Crisper
or
Magnetic
Door Seal
Can
Supporter
& Glass lid
P.V.C Bar
For fruits and
Leveling
(Optional)
vegetables.
Bar
Screw
3
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지4
OPERATIONS
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal
before filling it with fresh food.
If
is
operation
interrupted,
wait 5 minutes before
operating temperature
restarting.
TEMPERATURE CONTROL
Your
the
4
3
refrigerator has a control that
temperature in the refrigerator.
Initially,
5
temperature, adjust the control to a higher
number, and for warmer temperature, adjust the
2
control to
6
1
0
7
ICE MAKING
To make ice
on
To
the
cubes, fill
evaporator.
remove
ice
the ice
tray
with water and
cubes, hold the tray
place
at its ends and twist
gently.
TIP
To
regulate
set the control at 4.
For colder
it
let you
remove
before
ice cubes
easily,
run
water
on
the
twisting.
4
tray
a
lower number.
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지5
OPERATION
DEFROSTING
It is necessary to regularly defrost your refrigerator in order to ensure efficient operation.
The frost on the surface of the evaporator should not exceed a quarter of an inch (6mm) before
defrosting.
To
defrost,
turn the control to 0.
Before you start the
until it
stops.
When
defrosting
is
defrosting operation,
completed,
Turn the control dial to
a
CAUTION: Never
remove
desired
the
food from the
evaporator
and
drip tray, empty water, dry
and
put
put
it back
in the
fully
drip tray fully
until it
stops.
position.
any sharp
evaporator.
use
from the
remove
or
metallic instruments to
remove
ice, frost,
or
ice
trays
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
Store fresh food in the
refrigerator.
How food is frozen and thawed is
an
important
factor in
maintaining
its freshness and flavor.
Do not store food which goes bad
Allow hot food to cool
to
higher
prior
to
easily
at low
storing. Placing
temperatures,
hot food in the
such
as
bananas, pineapples, and melons.
refrigerator
could
spoil
other food and lead
electric bills!
When
storing, cover food with vinyl wrap or store in a container
evaporating and helps food to keep its taste and nutrients.
Do not open the door
to rise.
frequently. Opening
the door lets
warm
with
a
lid. This
air enter the
prevents
moisture from
refrigerator, causing
temperatures
Do not store bottles
Always
on
the
evaporator
-
they
may break when frozen.
clean food
food should be
prior to refrigeration. Vegetables and fruits should
wiped clean to prevent adjacent food from spoiling.
5
be washed and
wiped,
and
packed
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지6
CAN SERVER
Insert
cans
at the
top
and
pull
At least
them out from the bottom.
No
one or more
cans
FILNGTHERACK
Lift up
REMOVAL
6
slightly
and
pull
out.
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지7
CAN SERVER
Door liner
can
Cans may fall.
RECOMMENDED
It is
possible
to
put
a can
at the bottom when there
are no cans
7
in the
storage.
be torn out.
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지8
CLEANING
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.
Never
use
abrasive
metallic
cleaners,
INTERIOR
Regular cleaning of the interior and
parts is recommended. Disconnect the
power supply, and remove food and shelves, trays,
etc. Wash all compartments and shelves, trays etc.
with a baking soda solution. Rinse and dry.
-
interior
scouring pads, brushes, coarse
strong alkaline solutions on
or
any surface.
WARNING
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet
damp
Always remove the power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts. Wipe up excess moisture with
a sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric shock. Do not use
flammable or toxic cleaning liquids.
or
hands.
EXTERIOR
-
Use
a
lukewarm solution of mild soap
detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.
or
GENERAL INFORMATION
VACATION TIME
IF YOU MOVE
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
inside the
When you
remove all
plan
the interior
thoroughly,
prevent
to be away for
an
extended
Remove
To avoid
period,
food, disconnect the power cord, clean
securely fasten down all loose items
refrigerator.
damaging the leveling screw(s), turn them
or
all the way into the base.
and leave the door OPEN to
odor formation.
ANTI-CONDENSATION PIPE
The outside wall of the
POWER FAILURE
Most power failures are corrected within
two and will not affect your refrigerator
refrigerator
an
hour
cabinet may
sometimes
get warm,
especially just after
or
temperatures. However, you should minimize the
number of door openings while the power is off.
During power failures of longer duration, place a
block of dry ice on top of your frozen packages.
installation. Don't be
alarmed. This is due to
the anti-condensation
pipe, which pumps hot
refrigerant to prevent
"sweating" on the outer
cabinet wall.
8
Anti-Condensation
Pipe
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지9
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
If
connect the
possible,
household
or
lights
refrigerator to its own
causing an overload
from
individual electrical outlet to
that could
cause a
power
prevent
outage.
it and other
appliances
POWER CORD REPLACEMENT
If the
supply cord
agent.
is
it must be
damaged,
replaced by
a
special
cord available from the manufacturer
or
its
service
ABOUT GROUNDING
In the event of
an
an
(EARTHING)
electric short
circuit, grounding (earthing) reduces the risk of electric shock by providing
escape wire for the electric current.
In order to
Improper
prevent possible
electric
of the
grounding plug
person if the grounding instructions
appliance is properly grounded.
use
shock, this appliance
can
are
result in
not
an
empty refrigerator
can
be
a
attraction to children. Remove
lid,
or
grounded.
completely understood,
This
VERY DANGEROUS ATTRACTION
An
must be
electric shock. Consult
dangerous
the gasket, latch,
or
a
qualified
electrician
if you have doubts
appliance
must be
on
or
service
whether the
grounded (earthed.)
DON'T WAIT! DO IT NOW!
the entire door from your unused
or take some other action to make it
appliance,
NEVER STORE EXPLOSIVES AND CHEMICALS
harmless.
9
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지10
REPOSITIONING THE DOOR
HINGE(Option)
to
Your
refrigerator is designed with a reversible door so it may open from either the left or the right.
reposition the door hinge as necessary at the outset since it is inconvenient to do so later.
To
change
the door
hinge, please
refer to the
diagram
below and
proceed
as
It is best
follows.
F
G
H
CE
D
A
B
1. Remove all loose
2.
the
Carefully lay
Take
care
not to
3. Unscrew and
fittings
6.
Gently pull
on
remove
the
its back
appliance.
the original packing (You will
appliance
damage the pipework by keeping it clear of the floor.
4. Remove the Lower
5. Remove the
from inside the
Adjustable
on
Foot
Leg (H) by unscrewing
the bolt
remove
the 2 Bolts
attaching
the
it
(B).
(C).
it.
7. Before
on
this).
(A).
Hinge (D) by unscrewing
the door downwards to
need assistance to achieve
refitting the door, swap the Hinge Cap (F) by prying it from its current location and repositioning it
the other side of the door. Care should be taken not to damage the adjacent surfaces when removing
Hinge Cap.
10
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지11
REPOSITIONING THE DOOR
8. Unscrew the
9. Now
10.
11.
secure
Replace
Carefully
and
Upper Hinge pin (G)
the Lower
the
Hinge (D)
Adjustable
stand the
Foot
appliance
screw
it into the
to the cabinet
(A), setting
up,
(you
it at
using
HINGE(Option)
opposite
side hole in the
the 2 Bolts
approximately
20
top
of the cabinet.
(B).
mm.
will need assistance to do
this,)
and
position
it in its
permanent
location.
12. Check that the door opens and closes easily. Ensure that the door seal does not bind
creating gaps which would allow air into the interior. Adjust the hinges if necessary.
This
the
hinge
side
firm, level floor with sufficient space for free airflow around it. (At least
location, 20 mm beneath the worksurface). Avoid positions close to walls
or corners. There must be sufficient room for free ventilation, particularly at the back. The unit should be
located away from direct heat sources, such as cookers, radiators, and direct sunlight. If the unit is
positioned where the temperature is too low, condensation will form on the outside of the cabinet. Normal
room temperature is recommended.
10
appliance
mm
should be stood
on
all round
and, subject
on a
to
Avoid locations which may be affected
by
drafts
or
dampness,
product.
11
as
this will
impair the efficiency
of the
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지12
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING
CAUSES FIRST
PROPERLY, CHECK THESE POSSIBLE
:
PROBLEM
POSSIBLE CAUSES
REFRIGERATOR DOES
Has
NOT OPERATE
Has the power cord plug been removed
from the electrical wall outlet?
TEMPERATURE
Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
Warm weather-frequent door openings.
Door left open for a long time.
Large amount of foods are kept in the refrigerator.
TOO WARM
ABNORMAL
a
house fuse blown
or
circuit breaker
Refrigerator is installed in a weak or
leveling screw needs adjusting.
NOISE(S)
tripped?
or
loosened
uneven
place
or
Unnecessary objects placed
refrigerator.
REFRIGERATOR
Foods with
HAS ODOR
or
strong
wrapped.
Interior needs
odors should be
DEW FORMS ON THE
Not unusual
Door may have been left
can
find
a
tightly
during periods of high humidity.
ajar.
product label and a circuit diagram at back of your appliance. Manufacturing
digit of 'Serial No.' on the product label.
month is first three
Example
:
covered
cleaning.
CABINET SURFACE
You
in the back side of the
Serial No.
:
8
0
1
K R
Manufactured Jan. 1998.
00001
year month Korea Serial
12
year and
3828JD8497F(O/M)씁어내지 2003.5.27 10:26 AM 페이지13
SPECIFICATIONS
Model number
GR-151***
Climate class
Tropical
Rated
Rated
voltage
127 V
220 V
frequency
60 Hz
50/60 Hz
100 W
115 W
0.9 kWh/24hr
0.9 kWh/24hr
Rated
Electric power
input
consumption
Percentage running
time
50%
R134a,
Refrigerant
Net
Rated
30
weight
storage volume
Manufacturer
Country
of
150 liters
0.66 m2
area
(and/or
trade
kg
124 liters
Rated gross volume
Rated shelf
115 g
LG Electronics Inc.
mark)
Made in China
origin
13
GR-151SU
2
3
5~4
5
7~6
8
8
9
11~10
12
13
P/No. 3828JD8497F
Download PDF

advertising