LG | WD-12331AD | LG WD-12331AD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES Tel. : 0870 - 873 - LGLG(5454)
Fax.
: 0870 - 872 - 7337
LGEUK SERVICE WEB-SITE : http://uk.lge.com
P/No.: 3828ER3040P
Washing Machine
OWNER’S MANUAL
WD(M)-14330(5)AD
WD(M)-14331(6)AD
WD(M)-12331(6)AD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing machine.
P
roduct Features
■ More economical by Intelligent Wash System
Intelligent Wash System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy
and water consumption.
■ Child-Lock
The child-lock system is to be used for preventing children from pressing any
button to change the program during operation.
■ Low noise speed control system
By sensing the amount of load and balance, it evenly distributes load to minimize
the spinning noise level.
■ Auto Restart
Auto Restart allows the program to restart all by itself in case of power failure.
It does from the stage where it stopped.
■ Direct Drive System
The advanced Brushless DC motor rotates the drum directly without belt and
pulley.
C
ontents
Warnings....................................................................................3
Installation..................................................................................4
Specifications.............................................................................5
Installation..................................................................................6
Care before washing................................................................12
Adding detergent .....................................................................13
Function ...................................................................................14
How to use washer ..................................................................15
Maintenance ............................................................................24
Troubleshooting guide .............................................................27
Terms of Warranty ...................................................................30
2
W arnings
READ ALL INSTRUCTIONS BEFORE USE
!
WARNING!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock, or injury to persons when using
the washer, follow basic precautions, including the following:
• Do not install or store the washer where it will
be exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the
washer
or attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair
instructions that you understand and have the
skills to carry out.
• Keep the area underneath and around your
appliances free of combustible materials such
as lint, paper, rags, chemicals, etc.
• Close supervision is necessary if this
appliances is used by or near children or
infirm persons. Do not allow them to play on,
with, or inside this or any other appliance .
• Keep washer away from fire.
• Do not leave the washer door open.
An open door could entice children to hang on
the door or crawl inside the washer.
• Never reach into washer while it is moving.
Wait until the drum has completely stopped.
• The laundry process can reduce the flame
retardant of fabrics.
• Do not wash or dry articles that have been
cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances
(such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) which
may ignite or explode. Oil may remain in the
tub after a whole cycle resulting in fire
during drying. So, do not load oiled clothes.
• To avoid such a result, carefully follow the
garment manufacturer’s wash and care
instructions.
• Do not slam the washer door closed or try to
force the door open when locked. This could
result in damage to the washer.
• To minimize the possibility of electric shock,
unplug this appliance from the power supply
or disconnect the washer at the household
distribution panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
• Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
• dryer is intend only for drying textile material
in water.
• When a product was under water, Please
call service center. The risk of electric shock
and fire.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
• Do not use an adapter or otherwise defeat the grounding plug.
• If you don’t have the proper outlet, consult an electrician.
WARNING
:
Improper connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
3
I
nstallation
To minimize the risk of fire in a tumble dryer, the following should be observed:
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire
hazard and should not be placed in a tumble dryer.
Oil-affected items can ignite spontaneously, especially when exposed to heat
sources Such as in a tumble dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enought to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The ‘cool down’ cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
• Items that have been previously cleaned in, washed in, soaked in or spotted with
petro/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
• Items containing foam rubber (also known as latex foam) or similarly testured
rubber. like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
• Fabric softeners or similar products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
• Undergarments that contain metal reinforcements should not be placed in a tumble
dryer.
Damage to the tumble dryer can result if metal reinforcements come loose during
drying. When available a drying rack could be used for such items.
• Plastic articles such as shower caps or babies waterproof napkin covers should not
be placed in a tumble dryer.
• Rubber-backed articles, clothes fitted with foam rubber pads, pillows, galoshes and
rubber-coated tennis shoes should not be placed in a tumble dryer.
4
S
pecifications
Name
: Front loading washing machine
Power supply
: 220-240 V~, 50 Hz
Size
: 600mm(W) x 550mm(D) x 850mm(H)
Weight
: 61 kg
Wash capacity/Max. Watt
: 7 kg (2100W)
Dry capacity/Max. Watt
: 3.5 kg (1350W)
Water consumption
: 154ℓ(22ℓ/ kg)
Permissible water pressure : 0.3-10 kgf/㎠ (30-1000 kPa)
Spin speed
: No Spin/400/600/800/1000/1200/1400
[WD(M)-14330(5)AD/WD(M)-14331(6)AD]
No Spin/400/600/800/1000/1200
[WD(M)-12331(6)AD]
❋ The appearance and specifications may be varied without notice to raise the units
quality.
■ Accessories
Inlet hose(1EA)
Option : Hot/Cold(2EA)
Spanner
5
I
nstallation
Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Transit bolts
The appliance is fitted with transit bolts to prevent internal damage during transport.
• Packing and all transit bolts must
be removed before using the
washer.
When unpacking the base, be
sure to remove the additional
packing support in the middle
of the base packing.
Washer
Packing Support
Base Packing
(Packing support may not
be used depending on
models.)
Removing transit bolts
1. To prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove the bolts along with the rubber
bungs.
3. Take out the 4 bolts along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future use.
• If they are not removed, it may cause
heavy vibration, noise and malfunction.
• Whenever the appliance is transported,
the transit bolts must be refitted.
2. Unscrew the 4 bolts with
the spanner supplied.
4. Close the holes with the caps supplied.
6
I
nstallation
Installation place requirement
Level floor :
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with more than one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:right & left side)
Drain Hose
Washer
Laundry
Tub
approx.
2cm
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the
washer.
• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliances.
• The washer must not be installed in rooms where the temperature can drop below 0°C.
• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
• With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS Plug Safety Details (For U.K. User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This appliance must be earthed
Green and Yellow(Earth)
Brown(Live)
Blue(Neutral)
E
L
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
7
I
nstallation
Electrical connection
1. Do not use an extension cord or double adapter.
2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified
person in order to avoid a hazard.
3. Always unplug the machine and turn off the water supply after use.
4. Connect the machine to an earthed socket in accordance with current wiring regulations.
5. The appliance must be positioned so that the plug is easily accessible.
• Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. Contact your local service center
• Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under
pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
• If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room
temperature for a few hours before putting it into operation.
CAUTION
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing Machine is to be connected to the water mains using new hose-sets and that old
hose-sets should not be used.
Connecting water supply hose
Hose connector
Rubber seal
Hot water tap
Cold Hot(option)
8
Cold
water
tap
Water supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
Don’t strip or crossthread when connecting Inlet hose to the
valve.
If the water supply pressure is more than 1000kPa, a
decompression device should be installed.
• Two rubber seals are supplied with the water inlet hoses
these are in order to prevent water leaks.
• Check water tightness of washing machine connections
by turning the tap completely on.
• Periodically check the condition of the hose and replace
the hose if necessary.
• Make sure that there is no kink on the hose and that it is
not crushed.
When your washer has two valves,
• The Inlet hose which has red connector is for the hot
water tap.
• If the washer has two valves, the energy is saved by
using hot valve.
I
nstallation
Normal Tap without thread & screw type inlet hose
1. Unscrew the fixing screw to
attach the tap.
2. Push the connector up till the
rubber packing is in tight contact
with the tap. Then tighten the 4
screws.
3. Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
Normal Tap without thread & one touch type inlet hose
1. Untighten the upper connector
screw.
Upper
Connector
Fixing screw
Rubber
packing
Middle
connector
• In case the diameter of the tap is
large remove the guide plate.
Guide plate
2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Upper
Connector
Rubber packing
Plate
Upper
Connector
Water supply
hose
Middle
connector
• Turn the middle connector not
to have water leaked.
Connector
to the middle connector,
pushing the plate down.
• Make sure that the rubber seal
is inside the hose connector.
• To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal tap
Horizontal tap
Extension tap
• Your machine comes with only
cold water connection.
• Make sure that there are no
kinks in the hose and that it is
not crushed.
Square tap
9
I
nstallation
This equipment is not designed for maritime use or for use mobile installations such as
caravans, aircraft etc.
Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation !
Keep all packaging well away from children
Installation of drain hose
• When installing the drain hose to a sink,
secure it tightly with a string.
• Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
• The drain hose should not be placed higher
than 100 cm above the floor.
• Proper securing of the drain hose will protect
the floor from damage due to water leakage.
• When the drain hose is too long, do not force
back into the washer. This will cause abnormal
noise, malfunction, and water leakage.
10
I
nstallation
Level adjustment
1. Adjusting the washing machine level properly prevents excessive
noise and vibration.
Install the appliance on a solid and level floor surface, preferably
in a corner of the room.
NOTE
Timber or suspended type flooring may contribute to
excessive vibration or load balance errors.
2. If the floor is uneven, adjust the adjustable feet as required.
(do not insert pieces of wood etc. under the feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base
of the washer. All lock nuts must be tightened.
NOTE
In the case that the washing machine is installed on a raised
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
❊ Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
Concrete floors
• The installation surface must be clean, dry and level.
• Install washer on a flat hard floor.
Tile floors (Slippery floors)
• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm
sections and stick the pieces on to the dry tile where machine is to be placed.)
Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.
Wooden floors (Suspended floors)
Rubber Cup
• Wooden floors are particularly susceptible to vibration.
• To prevent vibration we recommend you place rubber cups under each foot,
It can be purchased from
at least 15mm thick under the washer, secured to at least 2 floor beams with screws. hardware suppliers.
• If possible install the washer in one of the corners of the room, where the floor is more stable.
Insert the rubber cups to reduce vibration.
Rubber cups ( p/no. 4620ER4002B ) can be purchased from the LG spare parts department.
Important!
• Proper placement and levelling of the washer ensures long, regular and reliable operation.
• The washer must be absolutely horizontal and stand firmly in position.
• It must not “Seesaw” across corners under load.
• The installation surface must be clean, free from floor wax and other lubricant coatings.
• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
11
C
are before washing
Before the first washing
Select a cycle (COTTON 60°C, add a half load of detergent) allow the unit to wash
without clothing.
This will remove residues from the drum that may have been left during manufacturing.
Caring before washing
1. Care Labels
Look for a care label on your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2. Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
soiled items with lightly soiled one.
Soil (Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
3. Caring before loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
• Check all pockets to make sure
that they are empty. Items such as
nails, hair clip, matches, pens,
coins and keys can damage both
your washer and your clothes.
• Close zippers, hooks and strings to
make sure that these items don’t
snag on other clothes.
• Pre treat dirt and stains by brushing
a little detergent dissolved in water
onto stains like collars and cuffs to
help shift dirt.
12
A dding detergent
■ Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent dosage
• The detergent should be used according to the
instruction of the detergent manufactrurers.
MAX
• If too much detergent is used more than the
recommended amount, too many suds can
occur and this will decrease the washing
result or cause heavy load to the motor.
(Causing malfunctions)
max
• Use powder detergent only for the front
loading washer.
• Detergent usage may need to be
adjusted for water temperature, water
hardness, size and soil level of the load.
For best results, avoid oversudsing.
• Main wash only ➔
• Pre Wash + Main Wash ➔
2. Adding Fabric Softener
(
)
4. Water softener
MAX
MAX
125 ml
125 ml
• Do not exceed the maximum fill line.
Overfilling can cause early dispensing
of the fabric softener which could stain
clothes.
• Do not leave the fabric softener in the
detergent drawer for more than 2 days.
(Fabric softener could harden)
• Softener will automatically be added
during the last rinse cycle.
• The soap drawer can be partially
opened to add pre dissolved soap
powder during the initial fill.
• A water softener, such as Calgon can be
used to cut down on the use of detergent
in extremely hard water areas.
Dispense according to the amount
specified on the packaging. First add
detergent and then the water softener.
• Use a quantity of detergent as for soft
water.
❋ Tips
• Full load : according to
manufacturer’s
recommendation.
• Part load : 3/4 of the normal amount.
• Minimum load : 1/2 of full load.
• Detergent is flushed from the dispenser
at the beginning of the cycle.
• Solvents(benzene, etc) are not
allowable.
NOTE
Do not pour fabric softener
directly on the clothes
13
unction
F
Recommended courses according to the laundry type
❋(
) : WD-12331(6)AD
Program
Fabric Type
Cotton
First check if laundry is
machine washable.
(white cotton, linen towel
and sheets...)
Colour fast gaments
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear...)
Proper
Temp.
(Option)
Option
Maximum
Load
Time
in
Minutes
Rating
140
(137)
Rating
103
(100)
95˚C
60˚C
(30°C, 40°C,
60°C-Eco)
Intensive
Rinse Hold
Rinse+
Pre Wash
Dry
Synthetic Polyamide, Acrylic,
Polyester.
40˚C
(30˚C,60˚C)
4.0kg
80
Delicate Delicate laundry easily
damaged.
30˚C
(Cold, 40˚C)
3.0kg
52
Wool/Silk Machine washable woolens
with pure new wool only.
30˚C
(Cold, 40˚C)
2.0kg
50
2.0kg
44
4.0kg
30
Hand
Wash
“Hand Wash” marked
delicate and wool laundry.
Quick 30 Coloured fast laundary
which is lightly soiled.
Cold
(30˚C)
Intensive
Rinse Hold
Rinse+
30˚C
❋ Water Temperature : Select the water temperature to the wash cycles.
Always follow garment manufacture’s care label or instructions
when laundering.
❋ Intensive : If the laundry is heavily soiled “Intensive” option is effective.
❋ Program setting with “Intensive” option for test in accordance or in conformity with
EN60456 and IEC 60456.
❋ Pre Wash : If the laundry is heavily soiled, “Pre Wash” Cotton is recommended.
Pre Wash is available in Cotton and Synthetic Program.
14
H ow to use washer
1. Cotton automatically
selected upon power on.
2. Manual Selecting
• Press the Power(
• Press the Power(
) button to start.
• Press the Start/Pause(
) button.
) button to start.
- Rinse : 3 times
• Select the conditions which you want to
use, by turning the program dial and
pressing each button.
For selecting the each conditions, please
refer to the page16~page23.
- Spin :
• Press the Start/Pause(
• Initial conditions
- Wash : main wash
) button.
• 1400 rpm
[WD(M)-14330(5)AD/WD(M)-14331(6)AD]
• 1200 rpm
[WD(M)-12331(6)AD]
- Water temperature : 60˚C
- Program : Cotton
15
H ow to use washer
(1) Dial : Program
(2) Button : Start / Pause
(3) Button : Intensive
(4) Button : Rinse Hold
(5) Button : Rinse+
(6) Button : Pre Wash
(7) Button : Dry
(8) Button : Child Lock
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Option
• By pressing the
Option button,
all Option
functions may
be selected.
- Intensive
- Rinse Hold
- Rinse+
- Pre Wash
- Dry
1. Intensive
• If the laundry is heavily soiled “Intensive”
option is effective.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
2. Rinse Hold
• Is selected by pressing the Rinse Hold button
this function leaves clothes in the machine;
suspended in the water after a rinse without
entering into spin.
• To proceed to a Drain or Spin function after a
Rinse hold, select Drain on the program dial or
press the Spin selector button to the desired
speed, then press the Start/Pause button.
16
3. Rinse+
• For additional rinse which may assist in
removing traces of detergent residue.
• By selecting Rinse+ function, the rinse
time and the rinse water are increased.
4. Pre Wash
• If the laundry is heavily soiled,
“Pre Wash” course is effective.
• Pre Wash is available in Cotton and
Synthetic.
5. Dry
• When you want to dry, select this button.
• Available in Cotton and Synthetic.
• Please note that the drying capacity is
3.5 kg. Please remove excess clothes
from the completed wash before
comencing the drying and ensure that the
cold water tap is left on.
The required lamp will light up for identification.
H ow to use washer
Spin
[WD(M)-14330(5)AD/WD(M)-14331(6)AD]
• By pressing the Spin button, the spin
speed can be chosen and the LED of rpm
is turned on.
[WD(M)-12331(6)AD]
1. Spin selection
• Spin Speed is available according to
the program as follows.
WD(M)-14330(5)AD / WD(M)-14331(6)AD
- Cotton, Rinse+Spin, Quick 30
No Spin - 400 - 600 - 800 - 1000 1200 - 1400
- Synthetic, Wool/Silk, Hand Wash
No Spin - 400 - 600 - 800 - 1000
Spin only:
1. Press the Power buton.
2. Set the desired spin speed by pressing
the Spin button.
3. Press the Start/Pause button.
- Delicate
No Spin - 400 - 600 - 800
WD(M)-12331(6)AD
- Cotton, Rinse+Spin, Quick 30
No Spin - 400 - 600 - 800 - 1000 1200
- Synthetic, Wool/Silk, Hand Wash
No Spin - 400 - 600 - 800 - 1000
- Delicate
No Spin - 400 - 600 - 800
2. No spin
• If no spin is selected, the washer stops
after draining water.
17
H ow to use washer
Water Temp.
Child Lock
If you choose to lock
the buttons on the
control assembly to
prevent tampering this
function may be
selected.
1. Child Lock
• By turning the Program Dial, the water
temperature can be selected.
- Cold
• Child Lock can be set by pressing the
Rinse+ button and Pre Wash button
simultaneously. (About three seconds)
- 30˚C / 40˚C / 60˚C / 95˚C
• Water temperature can be selected
according to the program.
The required temperature lamp will light up
for identification.
For the more detailed information, please
refer to the page14.
• When child lock is set, all buttons are locked
except for power button.
• To deactivate Child Lock system, press
Rinse+ and Pre Wash buttons
simultaneously again. (About three seconds)
• To change to the desired program, whilst
in child lock mode.
1. Press both Rinse+ and Pre Wash together
once again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
18
• The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
H ow to use washer
Dry
NOTE
The drying capacity for this model
is 3.5 kg. Please remove
approprate excess weight before
commencing the drying cycle.
• This washer-dryer’s
automatical process from
washing to drying can be
selected easily.
• For most even drying ,
make sure all articles in the
clothes load are similar in
material and thickness.
• Do not overload dryer by
stuffing too many articles
into drum. Items must be
able to tumble freely.
• If you open door and remove load before
dryer has finished its cycle, remember to
press the Start/Pause button.
• By pressing the DRY button, you can
select
Normal
➔
Low Temp.
More
➔
➔
1.Drying Automatic guide
• Use your Automatic Cycles to dry most
loads.
Electronic sensors measures the
temperature of the exhaust to increase
or decrease drying temperatures for
faster reaction time and tighter
temperature control.
• Recommand Automatic drying course for
clothes type.
a) For Synthetics select - Low Temp.
b) If you want to iron clothes-Less.
c) For Cottons select - Normal
d) For washable nappies select - More
NOTE: The estimated drying time varies
from the actual drying time with an
Automatic. The type of fabric, size of the
load, and the dryness selected, do affect
the drying times.
Time
Less
19
H ow to use washer
Dry
2.Drying time guide
• By press the Dry button, the drying time
can be selected.
• Drying course can last up to 150min.
When selecting drying only, drying
course will start after spining. (The
spinning time is about 19~22 min.)
• These drying times are given as a guide
to help you set your dryer for manual
drying. Drying times can vary greatly
depending on dampness, room
temperature and type of fabric and your
own experience will be your best guide.
Woolen Articles
- Do not tumble dry woolen articles. Pull them to
their original shape and dry them flat.
Woven and Loopknit Materials
- Some woven and loopknit materials may
shrinks, by varying amounts, depending on their
quality.
- Always stretch them out immediately after
drying.
Permanent Press and Synthetics
- Do not overload your dryer
- Take out permanent press articles as soon as
the dryer stops to reduce wrinkles.
20
Fiber or Leather Materials
- Always check the manufacture’s instructions.
Baby clothes and Night Gowns
- Always check the manufacture’s instructions.
Rubber and Plastics
- Do not dry any items made from or containing
rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber glass
- Do not dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
H ow to use washer
Time Delay
Program
1. Time Delay
Preparing washing before starting
“Time Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener
in the drawer.
• How to set “Time Delay”
- Press Power button.
- Turn the Program dial to select
the program you require.
- Press Time Delay button and set the
desired time.
- Press the Start/Pause button.
(“:” blinks.)
• If Time Delay button is pressed, “3:00”
is displayed. The maximum delayed time
is 19 hours and the minimum time is
3 hours.
• Each pressing of the button advances
on time delay by one hour.
• To cancel the time delay, press the
Power button.
• 8 programs are available according to the
laundry type.
• Lamp will light up to indicate selected
program.
1. Program
• When Start/Pause button is pressed,
the Cotton program is automatically
selected.
- By turning the Program dial, the
program is selected in order of
“ Cotton - Delicate - Quick 30 Rinse+Spin - Drain - Hand Wash Wool/Silk - Synthetic”.
For information regarding laundary type
for each program, please refer to page 14.
• Time Delay is ‘expected time’ from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
• According to the condition of water supply
and temperature, the delayed time and the
actual washing time may vary.
21
H ow to use washer
Start/Pause
Power
1. Start
1. Power
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• Press the Power button to turn power on
and off
2. Pause
• To cancel the Time Delay function, the
power button should be pressed.
• If temporary stop of wash cycle is
needed, press the Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
• NB. The door will not open before 1 to 2
minutes when Pause is selected,
or at the end of the wash cycle.
Door Lock
2. Initial Program
• When the Power button is pressed, the
washer is ready for Cotton program.
And the other initial conditions as
follows.
• So, if you want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
■ Initial program
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Detecting
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum. It will
take a few seconds.
• Available in Cotton, Synthetic.
22
• [WD(M)-14330(5)AD / WD(M)-14331(6)AD]
- Cotton Program / Main Wash /
Normal Rinse / 1400 rpm / 60˚C
• [WD(M)-12331(6)AD]
- Cotton Program / Main Wash /
Normal Rinse / 1200 rpm / 60˚C
H ow to use washer
Display
3. Completion of washing
• When washing cycle is completed,
“
” is displayed.
1. Special function display
4. Time left
• When child lock is selected, the
“
” is displayed.
• During washing cycle, the remaining
washing time is displayed.
• Recommended program by
manufacturer.
❋(
) : WD-12331(6)AD
• When time delay is selected, it shows
the remaining time to finish the selected
program.
2. Self diagnosis display
• If the machine encounters a fault during
operation, the associated fault will be
displayed.
“
“
“
“
“
“
“
“
“
“
” : Water pressure sensing error
” : Problem of overfilling water
” : Door is not closed
” : Water inlet trouble
” : Drainage trouble
” : Unbalanced load
” : Water temperature trouble
” : Over load in motor
” : Over load in motor
” : Dry heater or thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.
- Cotton 95˚C :
around 2 hours and 20(17) minutes
- Cotton 60˚C :
around 1 hour and 43(40) minutes
- Synthetic :
around 1 hour and 20 minutes
- Delicate : around 52 minutes
- Wool/Silk : around 50 minutes
- Hand Wash :
around 44 minutes
- Quick 30 : around 30 minutes
- Rinse+ Spin : around 21(18) minutes
- Drain : around 1 minute
• The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
• If an unbalanced load is detected or if
the suds removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
23
M aintenance
❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical
shock to avoid electrical shock hazards.
❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
The water inlet filter
-"
" error message will blink on the control panel when water does not enter the
detergent drawer.
- If your water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged.
It is therefore a good idea to clean it from time to time.
1. Turn off the
water tap.
2. Unscrew the
water inlet
hose.
3. Clean the
filter using a
hard bristle
brush.
4. Tighten up
the inlet
hose.
The drain pump filter
❋ The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
! CAUTION First drain the water using “Drain” program and then open the pump filter to
remove tangled threads or foreign objects.
Be careful when draining if the water is hot.
❋ Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
1. Open the lower cover
cap ( ) by using a
coin. Drain plug ( )
to pull out the hose.
2. Unplug the drain plug ( ),
allowing the water to flow out. At
this time use a vessel to prevent
water flowing on to the floor. When
water does not flow any more, turn
the pump filter ( ) open to the left.
3. Remove any foreign material
from the pump filter ( ). After
cleaning, turn the pump filter ( )
clockwise and insert the drain
plug ( )to the original place.
close the lower cover cap.
001
3
1
24
2
3
2
M aintenance
■ Dispenser drawer
❋ After a while detergents and fabric softeners leave a deposit in the drawer.
• It should be cleaned from time to time with a jet of running water.
• If necessary it can be removed completely from the machine by pressing the catch
downwards and by pulling it out.
MAX
• To facilitate cleaning, the upper part of the fabric softener compartment can be removed.
MAX
max
max
■ The drawer recess
❋ Detergent can also accumulate inside the recess which should
be cleaned occasionally with an old toothbrush.
• Once you have finished cleaning, replace the drawer and run a
rinse cycle without laundry.
■ The washing drum
• If you live in a hard water area, limescale may continuously build up in places where it cannot be
seen and thus not easily removed.
Over time the build up of scale clogs appliances, and if it is not kept in check, expensive
maintenance or repairs may result.
• Although the washing drum is made of Stainless steel, specks of rust can be caused by small
metal articles (paper clips, safety pins) which have been left in the drum.
• The washing drum should be cleaned from time to time.
• If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machine
use.
❋ Descaler may contain chemicals that may damage part of your washing machine.
❋ Remove any spots with a stainless steel cleaning agent.
❋ Never use steel wool.
25
M aintenance
■ Cleaning your washer
1. Exterior
Proper care of your washer can extend its life.
The outside of the machine can be cleaned with warm water and a neutral non abrasive
household detergent.
Immediately wipe off any spills. Wipe with damp cloth.
Try not to hit surface with sharp objects.
❋ IMPORTANT: Do not use methylated spirits, diluents or similar products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer through a complete cycle using hot water.
Repeat process if necessary.
NOTE
Remove hard water deposits using only cleaners labeled as washer safe.
■ Cold condition
If the washer is stored in an area where freezing may occur or moved in freezing
temperatures, follow these instructions to prevent damage to the washer:
1. Turn off water supply tap.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum.
Close the door.
5. Set spin cycle and let washer spin for 1minute to drain out all water.
Not all of the RV antifreeze will be expelled.
6. Unplug electrical power cord, dry the drum interior, and close the door.
7. Remove dispenser drawer drain and dry excessive water from the compartments.
8. Store washer in an uprignt position.
9. To remove antifreeze from washer after storage, run empty washer
through a complete cycle using detergent. Do not add wash load.
26
T
roubleshooting guide
❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Symptom
Possible Cause
Solution
Rattling and
clanking noise
• Foreign objects such as coins or
safety pins maybe in drum or
pump.
Stop washer and check drum
and drain filter.
If noise continues after washer
is restarted, call your authorised
service centre.
Thumping sound
• Heavy wash loads may produce
a thumping sound. This is usually
normal.
If sound continues, washer is
probably out of balance. Stop and
redistribute wash load.
Vibrating noise
• Have all the transit bolts and
packing been removed?
• Are all the feet resting firmly on
the ground?
If not removed during
installation. Refer to Installation guide
for removing transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
rearrange wash load.
Water leaks.
• Fill hoses or drain hose are loose
at tap or washer.
Check and tighten hose connections.
• House drain pipes are clogged.
Unclog drain pipe. Contact plumber
if necessary.
Too much detergent or unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
Oversudsing
Water does not enter
washer or it enters
slowly
Water in the washer
does not drain or
drains slowly.
• Water supply is not adequate in
area.
Check another tap in the house.
• Water supply tap is not
completely open.
Fully open tap.
• Water inlet hose(s) are kinked.
Straighten hose.
• The filter of the inlet hose(s)
clogged.
Check the filter of the inlet hose.
• Drain hose is kinked or clogged.
Clean and straighten the drain hose.
• The drain filter is clogged.
Clean the drain filter
27
roubleshooting guide
T
Symptom
Washer does not start
Possible Cause
• Electrical power cord may not
be plugged in or connection
may be loose.
Make sure plug fits tightly in wall
outlet.
• House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
• Water supply tap is not turned
on.
Washer will not spin
Solution
❋ Check that the door is firmly
shut.
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer begins to spin. The door
must lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait one or two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash cycle time
delayed
The washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Dry problem
28
• Does not dry
Do not overload.
Check that the washer is draining
properly to extract adequate water
from the load.
Clothes load is too small to tumble
property. Add a few towels.
T
roubleshooting guide
Symptom
Possible Cause
Solution
• Water supply is not adequate in area
• Water supply taps are not completely
open.
• Water inlet hose(s) are kinked.
• The filter of the inlet hose(s) are
clogged.
Check another tap in the house.
Fully open tap.
• Drain hose is kinked or clogged.
• The drain filter is clogged.
Clean and straighten the drain hose.
Clean the drain filter.
• Load is too small.
• Load is out of balance.
• The appliance has an unbalance
detection and correction system. If
individual heavy articles are loaded (ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
• If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
Add 1 or 2 similar items to help
balance the load.
Rearrange load to allow proper
spinning
• Is the door opend
or not completely
closed?
Straighten hose(s).
Check the filter of the inlet hose(s).
Close the door completely.
❋ If “ ”is not released, call for service.
Unplug the power plug and call for service.
• Water overfills due to the faulty water
valve.
• Water level sensor has malfunctioned.
Close the water tap.
Unplug the power plug.
Call for service.
• Over load in motor.
• Over load in motor.
• Check water supply.
Turn the tap on
If“
” is not released, unplug power
plug and call service.
29
T
erms of Warranty
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
• Service trips to your home to teach you how to use the product.
• If the product is connected to any voltage other than that shown on the rating plate.
• If the fault is caused by accident, neglect, misuse or Act of God.
• If the fault is caused by factors other than normal domestic use or use in accordance
with the owner's manual.
• Provide instruction on use of product or change the set-up of the product.
• If the fault is caused by pests for example, rats or cockroaches etc..
• Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
• Correcting the installation for example, levelling the product, adjustment of drain.
• Normal maintenance which recommended by the owner's manual.
• Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
• Replace fuses in or correct house wiring or correct house plumbing.
• Correction of unauthorized repairs.
• Incidental or consequential damage to personal property caused by possible defects
with this appliance.
• If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
If the product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of a
defective part, shall be borne by the owner.
30
Download PDF

advertising