LG | WF-S5700PHK | LG WF-S5700PHK Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODELS
:
WF-F(C/S) 5101(~5),5111(~5),5121(~5) PP(E/F/H)(X/K)
WF-F(C/S) 5201(~7),5211(~7),5221(~7) PP(E/F/H)(X/K)
WF-F(C/S) 5401(~5),5411(~5),5421(~5) TP(E/F/H)(X/K)
WF-F(C/S) 5700, 5710, 5720 PP(E/F/H)(X/K)
WF-F(C/S) 6101(~5),6111(~5),6121(~5) TP(E/F/H)(X/K)
WF-F(C/S) 6201(~7),6211(~7),6221(~7) TP(E/F/H)(X/K)
WF-F(C/S) 6700, 6710, 6720 TP(E/F/H)(X/K)
WF-T7014PP, WF-S5800PPK
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model name and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
Fuzzy Logic Control
A built-in load
automatically detects and measures the laundry load and
microprocessor optimizes washing conditions such as ideal water level and
washing time.
sensor
a
Advanced
the best
technology is built
washing result.
into the Electronic Control
SENSING
START
Laundry
System
SETTING
Sensor
Optimum
Washing
Water Level Sensor
WASHING
Condition
3
which
ensures
AUTO
POWER
OFF
Step washing
3 step
washing
makes best
washing performance with
Rubbing and Shaking
Rubbing
low
tangling.
Shaking and Disentangling
Lint Filter
Lint and loose threads from
washing cycle
are
caught by
laundry generated during
the lint filter for
a
the
cleaner wash.
Auto Restart
In the event of
start its
a power failure, the washing machine will automatically
interrupted cycle when power is resumed.
¡ APPLIED MODELS
:WF-F(C/S)
WF-F(C/S)
WF-F(C/S)
WF-F(C/S)
WF-F(C/S)
WF-F(C/S)
WF-F(C/S)
ATTENTION :Be
sure
5101(~5),5111(~5),5121(~5) P(E/F)(X/K)
5201(~7),5211(~7),5221(~7) P(E/F)(X/K)
5401(~5),5411(~5),5421(~5)T(E/F)(X/K)
5700, 5710, 5720 P(E/F)(X/K)
6101(~5),6111(~5),6121(~5)T(E/F)(X/K)
6201(~7),6211(~7),6221(~7)T(E/F)(X/K)
6700, 6710, 6720 T(E/F)(X/K)
to remove the unit from the carton
machine will not be able to operate
properly.
base, otherwise the
C
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
Troubleshooting
section. If you review
our
chart of
Troubleshooting Tips first,
you
may not need to call for service at all.
Introduction
Before
Starting
Safety
to Wash
Information
4
Identification of Parts
5
Function Information
6
Preparation Before Washing
7
Use of Water,
Special
Detergent,
Bleach and Softener 8
Guide for Stain Removal
Function of each Button
Washing Programs
Fuzzy
Wash
Economy
Additional Function
Options
Installation
Care and Maintenance
12
(Normal Wash)
Wash
Terms of
Warranty
Specification
14
14
Jean Wash
14
Wool Wash
14
Turbo Wash
14
Delay Start (Reservation)
Wash
16
Option Washing
17
Other useful Functions
18
Placing
and
Connecting
Water
Connecting
Drain Hose
Grounding
19
Leveling
Supply
Hose
Method
20
23
24
25
Cleaning
Troubleshooting
11
Cleaning
and Maintenance
26
Common
washing problems
27
Troubleshooting
28
Terms of
29
Warranty
Specification
30
4
S
afety
information
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Introducin
For your better understanding, these precautions are separated into two categories.
We urge you to pay special attention to them in the interests of your own safety, and
machine against damage:
Caution
Violation of these
Attention
Following
these
guidelines could result in
guidelines
serious
will protect your machine
Installation
appliance
is not intended for use
or
infirm persons without
Do not place any rugs
over the power cord.
Since the machine is
source.
children should be
Make
Supply
to
cord
sure
to
to
ensure
ground the earth wire or connect it
Make
sure
ground detector after you put the power cord
into an outlet.
not move.
When the power cord is loose, do not
Do not damage the power cords.
hands.
Do not
plug many cords into
one
or
feet under this
heavy material
heavy,
a
minimum of
exposed to sunlight, wind, rain, etc.
The appliance must be positioned so
the plug is accessible
and
a
use
or
two persons should move it.
Do not install the washer where it is
that
Young
supervised
they do not play with the appliance.
The base opening must not be obstructed by
carpeting when the washing machine is installed on
a carpeted floor.
Power
against damage.
Do not put your hands
machine.
by young
supervision.
Do not install the washing machine in a damp place.
Keep the washing machine away from fire or heat
children
injury.
Attention
Caution
The
fatal
or
protection of your
it.
plug
that
the power cord is free of dust
properly so that the cord will
it in
Do not touch the power cord with wet
outlet at the
same
time.
If the power cord or fuse is damaged, it must be
replaced by the manufacturer or its service agents or
similarly qualified people in order to avoid a hazard.
If the appliance is supplied from a cord extension
set or electrical portable outlet device the cord
extension set or electrical portable outlet device
should be positioned so it is not subject to splashing
or ingress of moisture.
Do not place any electric appliance with a charging
battery, magnetically-driven appliance and magnetic
body on the washer.
Operation
When you take out the
fall into the washer.
laundry, be careful not to
?
Do not put hands into the rotating tub.
Do not sprinkle water over the buttons.
Make
sure
the lid is closed
activating the machine.
more than 50˚C(122˚F)
?
Do not pour
into the tub.
?
Do not wash any
during operation of the
Do not put heavy objects on the machine.
Unplug the cord when the machine is not in
Do not press the buttons with sharp objects.
Check the hose connection and open the tap
before
spin cycle.
Maintenance
?
?
use.
?
water
waterproof materials.
Do not pour corrosive materials or bleach
over the washing machine. It will cause
damage to the power cord or the machine.
Never disassemble or remodel the washer
and power cord by yourself. Only a
qualified technician should work on the
machine.
5
I
dentification of Parts
Body
Power cord
Water
supply hose(1
EA
or
2EA)
Powder
detergent box
()
Softener dispenser
()
Bleach
dispenser
()
Inner tub
Control
panel
Lint filter
AUTOOFF
Drain hose
for pump model
Pulsator
Adjustable leg
Drain hose for
non
pump model
Accessories
Water
supply
hoses
Drain hose
or
or
1 Each for cold and
hot water
Note
Part
can
be different
according to the model.
Anti-rat
cover
(option)
Introducin
6
Function
Information
Our machine provides various washing methods which suit various conditions and
types of laundry.
Different types of
laundry washing
Fuzzy(Normal)
Wash
Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 14)
Use this
Jean Wash
Use this
Program for heavily soiled durable garments e.g. overalls, jeans.
heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
(refer to page 14)
Thick and
Wool Wash
Delicate clothes
(lingerie, wool, etc.)
which may be
The fibers of machine washable woolens have been
easily damaged can be washed.
(refer to page 14)
specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
?
?
?
?
When
washing woolens use a mild detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and
tumble action of a
dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
Washing according to the condition of laundry
Economy
Wash
Economy wash can be
(refer to page 14)
selected to wash
lightly
soiled clothes of less than 2.0
kg in
a
short time.
Turbo Wash
Turbo Wash is
laundry
with
designed to maximize washing performance and can be selected to
Fuzzy or Jean program. (refer to page 14)
wash
heavily soiled
Other washing method
Delay
Delay
start Wash
start Wash
is used to
The number of hours to be
Option
delay the finishing time of the operation.
delayed can be set by the user accordingly.
(refer to page 16)
Wash
Spin, Rinse/Spin, Rinse, Wash/Rinse,
and Wash
only options can selected.
(refer to page 17)
7
Before
Preparation
Washing
BeforStaingWsh
Care Labels
*
a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for
Sort clothes into loads that can be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
?
Check all
pockets to make sure that they are empty. Things
Remove belts,
?
Check the
underwires,
nails, hairclips, matches,
etc. to
prevent damage
to the
machine
or
larger during washing.
your clothes.
WIRE
washing instructions.
Remove tissue in pockets.
Pretreatment
on
stains
or
heavy
Pretreat shirt collars and cuffs with
Before
?
as
Pretreat any dirt and stains.
sure the clothes are washable in water.
Make
?
such
pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become
?
?
Loading
Use
a
washing
treat
special
soil
pre-wash product or liquid detergent when placing them in the washer.
liquid detergent or a paste of water and granular detergent.
a
stains with bar soaps,
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light and Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer
can completely remove oil.
dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Do not
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
Use nylon nets for long, delicate items.
laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
For
,
8
of Water,
Use
BeforStaingWsh
Using
Detergent,
Bleach and Softener
Water
Amount of Water Level
?
?
This machine detects the
will be shown
on
the control
?
The
?
When the water level is
same
used)
panel.
temperature
The machine sets the
?
You
appropriate temperature automatically according to the wash program
change
by pressing the WATER TEMP button. (refer to page 12)
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning
.
the water temperature
can
results. We recommend temperatures of:
White
HOT 49~60°C...(120-140˚F)
-
-
-
WARM
COLD*
29~40°C...(85-105˚F)
18~24°C...(65-75˚F)
items, diapers, underclothing
and
heavily soiled, colorfast items.
Most items
Only very bright colors
with
light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
-
-
-
-
*
be
water level is indicated
?
?
(to
automatically detected, it may differ depending on the quantity of laundry even
on the control panel.
though
The amount of a cup in the diagram is about 40g for concentrated detergent.
Water
?
sets the water
following table shows the amount of water.
the
?
quantity of laundry automatically, then
level and proper amount of detergent.
When you select a wash program, the water level and amount of detergent
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean
effectively.
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for
severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower water temperature.
Choosing
the
right detergent
We recommend the
use
of domestic
detergent, (powder, liquid or concentrated). Soap flakes or
washing woolens
granulated soap powders should not be used in your washing machine. When
remember to use detergent suitable for washing woolens.
9
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
liquid and concentrated detergents,
follow the recommendations of the
(Jeans
detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes
water. Lots of foam may look
foam
means
not
or
machine.
the
washing
detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
If excess
Adding
the
detergent
Open the detergent dispenser and deposit the appropriate
Powder Detergent Box
amount of detergent
()
where you deposit the detergent
Powder Detergent dispenser.
Where you
Some detergents MUST be fully dissolved before
deposit the
adding to your machine to get the best wash results. detergent
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
10
U
BeforStaingWsh
se
of Water,
Detergent,
Bleach and Softener
Fabric Softener
Using
?
?
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like
oil stains.
Measure and add the recommended amount of fabric
softener into the compartment marked with this smbol(
Softener
max
or
35mL.
Overfilling can cause early dispensing of the fabric
which could result in stained clothes. A cup with
?
)
).
Fabric softener is
Follow manufacturer's direction.
in
the
final
rinse.
automatically dispensed
Do not overfill. The dispenser hold
Never add more than 35mL.
dispenser (
a
softener
pouring spout will help you
avoid
spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Attention
Do not mix with
detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric
Scrud(Waxy
Build
softener
dispenser.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
When filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 26)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
a warm one.
consistency is less likely to leave residue on the dispenser and contribute to
a
11
Guide for Stain Removal
Special
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
?
?
?
?
?
?
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or
explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain,
then follow the recommended treatment in the stain
removal chart below.
?
To pretreat
stains,
use a
prewash product, liquid detergent,
granular detergent
and water.
?
Use cold water
unknown stains because hot water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
or a
set
paste made from
stains.
specific fabrics.
inside
Follow fabric care label
instructions
seam.
Stain Removal
STAIN
Adhesive tape,
rubber cement
chewing gum,
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
TREATMENT
Apply ice. Scrape off excess. Place stain face down
nonflammable dry cleaning fluid.
Use
on
paper towels. Saturate with
prewash stain remover or
product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with
product containing enzymes. Wash using bleach
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
Nail polish
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
Paint, varnish
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
Rust, brown or yellow
discoloration
Shoe polish
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
detergent and
: Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
LIQUID
safe for fabric.
BeforStaingWsh
12
F
BeforStaingWsh
unction of each Button
Water
temperature button
Water level button
Use to select water temperature.
Pressing the button allows you to select
?
Cold
E
Warm
(Hot&Cold)
Cold respectively. Default
E
Hot
(indication of detergent amount)
?
Use to
adjust the water level
amount of detergent
E
setting is Cold.
as
required.
The
appropriate
is shown next to the water level in
the WATER-DETERGENT
?
Water level is
diagram
automatically selected for fuzzy (normal)
and jean programs.
following settings are indicated
pushed LARGE E EX-LARGE E
The
MEDIUM
Use to select
TURBO, WASH, RINSE
and SPIN functions
as
the button is
SMALL
E
LARGE
Child lock function
Process button
?
E
as
desired.
Use to lock
or
unlock the control buttons to
prevent setting from being changed by a child.
To lock, push both the PROCESS, and
PROGRAM buttons simultaneously and to unlock
push them one more time during the washing
process.
(refer to page 18)
Note
The control
panel may differ according to
different models
13
Delay Start (Reservation)
?
?
button
delayed finishing time.
The time changes 6 E 9 E 15(6+9)
6hr when the button is pushed.
To Delay Start, push both the
Use to set
buttons
E
button
Use for
selecting wash program.
This button allows you to select 4
different programs for different kinds of
?
a
PROGRAM, and START/PAUSE
Program
?
laundry
and dirtiness.
program selections
?
follows: FUZZY
simultaneously.
ECONOMY
FUZZY
E
?
?
E
E
WOOL
E
Select the
(NORMAL)
by pressing
etc.
AUTO OFF
?
(NORMAL)
JEAN
desired program
(refer to page 16)
light up in sequence as
the button.
(Power) button
Use to turn the power on or off.
Push again and power goes on or off
The power goes off automatically about
10 seconds after the wash is finished.
AUTO OFF
Start/Pause button
?
Use to start
?
Repeats
?
pause the
washing process.
by pushing the button.
The power goes off automatically 10 minutes after stopping.
This appliance is fitted with a safety function that automatically stops the
operation of the washing machine when it is exposed to heavy disturbance on
or
start and pause
the mains.
:
3 step works at
large
and medium water level of
Fuzzy
and Jean program.
BeforStaingWsh
14
Washing Programs
WashingProm
Washing
Programs
Fuzzy Wash
(Normal Wash)
AUTO OFF
Add
the
Add
the detergent
laundry
1
2
4
Add the appropriate
quantity of detergent as
indicated by the water
level next to WATERDETERGENT.
Or follow the detergent
manufacturer's
instructions
Used for normal loads, this mode
automatically selects the most
appropriate conditions and
completes the sequence in one
operation. The built-in sensor
detects the size of the load and the
ideal wash power and wash, rinse
and spin times are set accordingly
1
3
Economy Wash
Use this mode when washing lightly
5
2
Select the
ECONOMY
soiled clothes for a short time. The
weight should be under 2.0kg.
program on
the Control
panel.
Jean Wash
1
5
2
3
Use jeans program when
washing
heavy, thick, and extremely dirty
laundry such as jeans and work
Select the
JEAN
program on
the Control
outfits.
panel.
Wool Wash
Use this program for washing delicate
1
3
fabrics such
as lingerie and woolens.
(wash only "water washable" clothes)
Before washing your woolens check
the care label for the washing
5
2
Use neutral detergent
appropriate for the
laundry.
When washing
Select the
WOOL
program on
the Control
instructions.
woolens use a mild
panel.
detergent recommended for washing wool.
(wash only water washable clothes)
1
4
2
3
6
Turbo Wash
Use this mode to wash normal
clothes or thick and
which
are
heavy clothes
excessively dirty. Turbo
Fuzzy or
mode can be used with
Jean program.
The TURBO
will not work
in WOOL &
ECONOMY
program.
Select the
Turbo by
pressing the
Process
button.
TURBO
WASH
RINSE
SPIN
15
Close the lid
3
as
r
-
nt
Caution & Note
Finish
5
6
If water is already in the tub, or putting wet
laundry into the tub before starting will
The pulsator rotates for 8
Water will be supplied
When the wash
increase the water level.
seconds to detect the
for 2 minutes after the
With
laundry load.
start of the wash to
program ends, the
buzzer will ring for 10
Then the water level and
supplement the water
the amount of detergent to
the laundry has
be used will be shown and
absorbed.
4
4
seconds before the
Power goes off
6
7
6
7
6
7
When
setting the water level manually, do not
prevent damage to laundry.
Washing with hot water may damage the
laundry (Water is set to cold automatically).
Ensure that the load is under 2kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still
set to MEDIUM to
t
d-
contain some water. This is normal.
l.
5
The water level and the
amount of detergent to be
used will be shown and
water will be supplied.
can
automatically.
water will be supplied.
4
lightweight bulky loads, water level
be set low.
7
8
WashingProm
16
D
AditonalFucOps
elay Start (Reservation) Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
,
1
Press the POWER button to turn power
on.
AUTO OFF
2
Press the PROGRAM button to select the
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
3
panel.
Press both the PROGRAM button and the START/PAUSE button
simultaneously.
The time
changes
6E 9E
4
Add the
detergent.
The
as
following order
E
6Hours
.
appropriate quantity of detergent marked next to
water level of
the
WATER-DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Add the
laundry
and press the START/PAUSE button.
When you press the START/PAUSE button the
blink.
6
an
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Close the lid.
Water will be
Finish
The
wash to
light will
washing will be finished according to
the
delayed time.
Note
If the lid is open, the machine will not
work, and
an
alarm
signal will alarm to remind you
to close the
washing program, spinning time, water level or hot/cold manually, press the Delay Start
(RESERVATION) button and select the desired option. Then press the START/PAUSE button.
To select
laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
lid.
17
Option Washing
When you only need the Wash, Wash/Rinse, Rinse,
be set manually as follows.
1
Press the AUTO OFF
Rinse/Spin
button to turn power
(Power)
or
Spin cycle,
this can
on.
AUTO OFF
2
Wash
,
Wash+Rinse
,
Rinse
Rinse+Spin
,
,
Press the PROCESS button until above
light is on. (refer to page 12)
Spin only options
Option Washing
When you want to only drain, wait until the water in the
washing tub drains completely and then, turn off the
power.
3
Press the WATER LEVEL button, to control the water level according to the
laundry. If you do not choose anything, it is set the LARGE water
level automatically.
(refer to page 12)
amount of
4
Add the
5
Press the START/PAUSE button.
6
Add the
laundry
into the
detergent
washing
tub.
and close the lid.
Note
?
When
a
Wash, Wash/Rinse or Rinse only option is selected,
after the wash is
completed the water will
drained off, If you wish to drain the water, press the SPIN button and wait until the water in the tub
has drained completely. Then press the START/PAUSE button
not be
.
?
?
?
If you do not
specify
If only Rinse is
It is
the water level, then Medium will be
selected, the process will
designed that fabric
softener be
start from Water
automatically selected.
Supply.
manually put before final rinse in wash option mode.
AditonalFucOps
18
O
AditonalFucOps
ther Useful Functions
Child Lock Function
If you want to lock all the
use
the child lock
keys to prevent all the setting from being changed by
a
child,
you
can
option.
How to Lock
1
Press the POWER button.
Turn Power
on.
AUTO OFF
2
Press the START/PAUSE button to start
washing.
After all
3
washing conditions
are
set
Press both the PROCESS button and the PROGRAM button
according to the manual.
simultaneously.
During the wash program, all the buttons are locked
until washing is completed or it is child- lock
function is deactivated manually.
How to Unlock
If you want to unlock
during wash, press both the PROCESS
and the PROGRAM button
simultaneously
again.
Note
In child-Lock
Mute
mode, all process light will blink.
Option
If you want to
use
the
washing machine
without alarm
signal sounds, press both the
WATER LEVEL and
PROCESS buttons simultaneously.
To make buzzer
time.
work, press both the WATER LEVEL and PROCESS buttons simultaneously one more
19
and
Placing
1
Leveling
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm right
side and left sides of the machine for ease of
more
than 10cm
installation.
At the rear,
a
minimum clearance of 10cm is
more
than
suggested.
2cm
more
than
2cm
2
Check that the machine is level
Open the lid
same as
and look from above to
see
Top
view of the machine
if it is
shown.
3 Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg
washing machine is
placed evenly.
until the
the
Adjustable legs
Installing the Anti-Rat Cover (option)
The anti-rat cover should be affixed
firmly from the back of the washer
Caution
If the power is supplied from a cord extension set
outlet device should be positioned so that it is hot
or
generator, the cord extension
set
or
electrical
exposed to splashing or ingress of moisture.
portable
Instal ion
20C
Instal ion
onnecting
Supply Hose
?Before connecting the Water Supply Hose to the water tap, check the hose type and then choose
the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make sure to
connect the blue inlet hose to the cold water tap, and the orange inlet hose to the hot water tap.
?Washing machine is to be connected to the water mains using new hose sets and that old hose
sets should not be reused.
Connecting
Water
Normal
1
Water
Supply
Hose to water
Type
Untighten
the
(Normal tap without thread &
Fixing
screw
type inlet hose.)
Rubber
screw
Untighten the screw of the connector so
tap can be placed in the middle.
2
tap
packing
that the
screw
Connector
the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
to the connector
Push the water
supply
hose connects
supply hose vertically upwards
that the rubber seal within the hose
can
securely
Connector
so
adhere
completely to the tap.
Water
Supply
4
Fixing
the connector of connector and water
supply
hose
Attach the water
then
5
supply hose to the connector and
tighten it by screwing it to the right.
Check the connection of water
After
supply
connecting the hose, open the tap to check
for any water leakage.
In case of water leakage, close the tap and start
again from step
1
hose and the connector
Hose
21
Normal
1
Type
Separate
(Normal tap without thread & one touch type inlet hose.)
Middle connector from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Supply
Hose
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
the tap is too
large.
Guide
plate
Rubber
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate.
3
Then follow
packing
step1.
Fixing Connectors to
the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector
and Middle Connector
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting
Middle
Connector
Fixed sticker
Middle Connector and Water
Supply
pressing rod of the Water Supply
separated from middle connector
and
then join it to the middle
Step1)
Connector
Middle
Connector
Hose
Press down the
Hose which
(refer to
was
Pressing
rod
connector.
Water
6
Check for water
After
leakage
the
hose, open the tap to check
connecting
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
skip step 1, water leakage may occur.
If you
Supply
Hose
Pressing
handle
Instal ion
22
C
Instal ion
onnecting
Screw
1
Water
Supply Hose
Type
Attach the water
hose to the tap.
supply
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
Water
the tap.
tap
Rubber
Water
2
Connect the water
supply
Packing
Supply
hose to the tap.
Connect the water
tighten it by
3
supply hose to the tap and then
screwing it to the right.
Check water
leakage.
After
connecting the hose, open the tap to
for any water leakage.
Connecting
Water
Supply
Connect the water
the
check
Hose to the machine
supply hose to
inlet valve of
and then lock it by
washing machine,
connecting part.
turning
the hose
Check
to
see
if there is
the connector.
a
rubber seal inside
Hose connector
Rubber seal
Hose
23
Connecting
Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose
the correct instructions.
Pump
Instal ion
Model
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose over the
of the drain pump and
tighten the clamp.
standpipe or
wash tub.
Hose
Guide
Within 50mm
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2m from the floor.
~
Non-Pump
1
Before
Model
connecting
Ensure that the hose
clip
is set
as
indicated here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
24
G
CarendMitc
rounding
Method
Earth wire should be connected.
If the earth wire is not connected, there is
caused by the current leakage.
Grounding
possible
a
danger of
electric shock
Method with Ground insert space Terminal
If the AC current outlet has
ground terminal, then
separate grounding
required. Note that AC
outlet
power
configurations may differ from country
a
is not
to
Ground Terminal
country
Outlet with
Other
Grounding
Method
Burying Copper
bury it
more
terminal.
Plate
Connect the Ground Wire
Plate and
ground
to
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Using Ground
Ground
Wire
Copper
ground Wire to the socket provided
exclusively for Grounding.
Plate
Connect the
Using Short Circuit
Ground
Wire
Breaker
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
Short-circuit
breaker
Caution
?
?
To prevent a possible explosion, do not connect ground to a gas pipe
Do not connect ground to telephone wires or lightning rods. This may be
storms
?
Connecting ground to plastic has no
?
Ground wires should be connected when
effect
an
extension cord is used.
dangerous during electrical
25
Cleaning
supply into the tub is not clean or the filter is clogged with
particles(Such
sand), clean the filter in the inlet valve occasionally.(The figure of
power cord and water tap may vary according to the country)
When water
as
To Clean the Filter in the Inlet Valve
Close the tap before
1
turning off the
water from the machine
removing the water
supply hose pull out the filter.
Then
use a
pulling out the cord.
completely.
After
3
Turn off the power before
2
power.
Select both hot/cold and then press the
[START/PAUSE] button to remove
4
Replace the filter after cleaning it.
brush to clean
the filter.
Caution
?
Before
cleaning the filter, the impurities in the water supply hose
should be removed.
To Clean the Lint Filter
1
Pull out the lint filter from
2
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
3
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
?
If the lint filter is torn
To Clean the
1
damaged, purchase a new
one
from LG service center.
Pump casing (for pump model)
Unfasten 4
back
or
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin, etc
3
fasten it.
such
(Bottom view)
(Bottom view)
Caution
?
Check if water leaks after
reassembling. (The
Rubber
Reassemble the cap to
the arrow direction and
ring
is in the
cap)
CarendMitc
26
C
CarendMitc
leaning
and Maintenance
When there is a fear of
?
?
?
freezing
Close the water taps and remove the Water Supply Hose.
Remove the water which remains in the water supply.
Lower the drain hose and drain the water in the bowl and the drain hose
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
and
supply
Wash Inner-tub
drainage of water.
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
use a clean soft cloth dampened with liquid detergent, then rinse. (Do
the inner-tub
not use harsh or
Inlet Hoses
Hoses
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit
sharp objects.
Exterior
Long
Vacations
Be
sure
water
be below
Cleaning the
?
?
supply
freezing.
is shut off at faucets. Drain all water from hoses if weather will
regular cold water washing,
it is very
important that you occasionally clean
Fill your washer with hot water.
Add about two cups of
a
powdered detergent that contains phosphate.
Let it operate for several minutes.
?
Stop the washer,
?
After
soaking,
surface with
Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
gritty cleaners.)
open the lid and leave it to soak
drain the washer and
run
it
overnight.
through
We do not recommend that you wash clothes
a
normal
cycle.
during this procedure.
27
Common washing problems
Many washing problems involve poor soil & stain removal, residues of lint and
damage. For satisfactory washing results, follow these
scum, and fabric
instructions.
Troubleshting
WASH PROBLEM
Problems
Poor soil
removal
Solutions & Preventive Measures
Possible Causes
?
Not
?
Wash water
enough detergent
?
?
?
?
the washer
Overloading
Use
cycle
sorting
?
pretreat stain
Reduce load size.
?
Wash with Jean
Incorrect
?
Do not
soil type.
?
?
Blue Stains
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
page 7.
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
softener
See page 10 for
?
Black or gray
marks on
clothes
Yellow or
brown rust
stains
A
buildup
caused
by
the
?
interaction of fabric
softener and
detergent
can
flake off and mark clothes
?
Not
enough detergent
?
Iron
or
water
or
manganese in
supply,
water
?
dispenser and do not pour
directly onto fabric.
instructions.
more
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
Use correct amount of detergent for load
size,
amount of soil
and water hardness.
?
To restore discolored load of whites,
use
rust
remover
safe
for fabric.
pipes,
water heater
required according to
(refer to page 8)
or Soak(Turbo) & Jean wash cycle for
heavy soiled laundry.
Separate heavily soiled items from lightly soiled ones.
Pretreat stain and heavy soil according to directions shown
on
?
amount of
hot water for normal soil.
warm or
Different water temperature may be
Incorrect wash
?
size,
soil and water hardness.
temperature
too low.
Use correct amount of detergent for load
?
Install
nonprecipitating water
softener
or an
iron filter in
supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
your water
?
Lint
?
?
?
Residue
or
detergent
Incorrect
sorting
pocket
Overloading the washer
?
?
Overloading
?
Undissolved
?
Use too
the washer
detergent
much detergent
or
Incorrect
use
of chlorine
?
?
Unfastened
zippers,
hooks, buckles
Ribs, tears and broken
?
Overloading the washer
Degradation of fabric
synthetic fabrics and remove tissues
sorting and caring
Do not overload the washer
?
Do not overload the washer.
?
?
detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Some
Never pour chlorine bleach
See page 9 for
?
Fasten
?
Remove
threads
?
towels, flannelette sheets, separately
?
bleach.
snags
eg
pockets
before loading.
?
?
givers
before wash. See page 7 for
?
Holes, tears,
Wash lint
from lint collectors eg
Tissues left in
directly on fabric.
adding liquid bleach.
zippers, hooks,
objects
in
and buckles.
pockets.
loading.
?
Do not overload the washer.
See page 7 for
caring before
in
28
T roubleshooting
Before
Troubleshting
calling for
Error
Symptom
Water
Supply
service check the
Failure
problem against
the list below.
Message
Check up
TURBO
.
WASH
.
RINSE
.
SPIN
.
.
Is the water tap shut off?
Is the water supply cut off ?
Is the tap
or
water
supply hose frozen
?
Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected
is Cold?
.
Drainage
Failure
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose
TURBO
WASH
RINSE
SPIN
Failure
TURBO
or
drain pump
Check if electric power has gone off.
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on
.
Is the lid closed?
.
Ask for
WASH
RINSE
SPIN
Door(Lid) Open
positioned correctly?
or placed too high?
(only pump model) clogged with impurities?
.
Spin
Is the Cold hose connected to Hot?
TURBO
a
flat surface?
WASH
RINSE
SPIN
Internal sensing
failure
Power failure
Overflow failure
help
at the
LG Electronic branch
of the Service Center
29
Terms
of
Warranty
What Is Not Covered:
?
If the
product is
?
If the fault is
?
If the fault is
connected to any
voltage other than that shown on the rating plate.
caused by accident, neglect, misuse or Act of God.
caused by factors other than normal domestic use or use in
accordance with the owner's manual.
?
?
?
?
?
?
?
?
?
Provide instruction
change the set-up of the product.
If the fault is caused by pests for example, rats or cockroaches etc..
Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
Correcting the installation for example, levelling the product, adjustment of drain.
Normal maintenance which recommended by the owner's manual.
Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
Replace fuses in or correct house wiring or correct house plumbing.
Correction of unauthorized repairs.
Incidental or consequential damage to personal property caused by possible defects
with this appliance.
If the
on use
of product
or
product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
30
S pecification
Specifaton
H
D
W
Model
WF-F(C/S) 5101(~5),5111(~5),5121(~5) PP(E/F/H)(X/K)
WF-F(C/S) 5201(~7),5211(~7),5221(~7) PP(E/F/H)(X/K)
WF-F(C/S) 5401(~5),5411(~5),5421(~5)TP(E/F/H)(X/K)
WF-F(C/S) 5700, 5710,
5720
PP(E/F/H)(X/K)
WF-F(C/S) 6101(~5),6111(~5),6121(~5)TP(E/F/H)(X/K)
WF-F(C/S) 6201(~7),6211(~7),6221(~7)TP(E/F/H)(X/K)
WF-F(C/S) 6700, 6710,
Size
6720
TP(E/F/H)(X/K), WF-T7014PP, WF-S5800PPK
WF-F(C/S) 5101(~5),5121(~5),5401(~5),
540(W)x540(D)x850(H)
5421(~5),6101(~5),6121(~5)
WF-F(C/S) 5111(~5),5411(~5),6111(~5)
540(W)x540(D)x890(H)
WF-F(C/S) 5201(~7),5221(~7),5700, 5720
530(W)x540(D)x850(H)
6201(~7),6221(~7),6700,
6720
WF-T7014PP, WF-S5800PPK
WF-F(C/S) 5211(~7),6211(~7),6710
Water tab pressure
In
30 -800 kPa (0.3 -8
530(W)x540(D)x900(H)
kgf /cm2)
our continuing effort to improve the quality of our appliances,
changes to the appliance without revising this manual.
it may be necessary to make
P/No.: 3828EA3012W
Download PDF