LG | WF-T1022TPX | LG WF-T1022TPX Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T1022TP(H)/S
WF-T1122TP(H)/S
WF-T1268TH
WF-T1022THX
LWD-1022S
WF-T1022TPX
WF-T1222THX
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model
name
and serial number of the set.
Quote this information to your dealer when you require service.
P
roduct Features
The Trubo Drum washing machine does not operate with the lid open. If the lid is opened during
wash, rinse and spin cycles, the machine will stop automatically.
"For better wash of lots of
of
laundry, putting
more
heavily-soiled laundry first and using about 300g
detergent."
is recommended, but if too much foam is made, decrease the amount of
detergent
Fuzzy Logic Control
A built-in load
and
load
and
a
laundry
microprocessor
optimizes washing conditions such as ideal water
consumption and washing time.
measures
sensor
the
automatically detects
START
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
WASHING
Condition
Advanced technology is built into the Electronic Control
System which ensures the best washing result.
Turbo Drum
washing
While the "Punch + 3" pulsator rotates in one direction, the Turbo
Drum rotates in the opposite direction. This creates an even flow
of water in both the upper and lower parts of the drum, resulting
in and an enhanced washing and rinsing action.
Step washing
3
3
step washing makes the best washing performance with low tangling.
Rubbing and Shaking
Rubbing
Punch
+
washing
3
Shaking and Disentangling
action
The Punch action's powerful vertical
with the rotating pulsator movement
performance and reduces tangles.
water
thrust combined
improves washing
create powerful jets of water which
laundry up and down in the drum to ensure your
laundry is evenly and thoroughly washed.
3
Spinning mini-pulsators
move
the
Lint Filter
Lint and loose threads from
washing cycle
are
laundry generated during the
caught by the lint filters for a cleaner
wash.
Strong spin
By employing
a
strong spin method, laundry
becomes much cleaner.
AUTO
POWER
OFF
C
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the
may
Troubleshooting
not
need
to
Introduction
Before
Starting
section. If you review
call for service
at
Safety
to Wash
our
chart of
Troubleshooting Tips first,
all.
Information
4
Identification of Parts
5
Function Information
6
Before
Washing
7
Detergent, Bleach
8
Guide for Stain Removal
11
Preparation
Use of Water,
and Softener
Special
Washing Programs
Function of each Button
12
Fuzzy Wash (Normal Wash)
14
Jean Wash, Delicate Wash, Wool Wash
Additional Function
Options
Installation
Care and Maintenance
Favourite Wash
16
Speedy Wash
17
Soak Wash
18
Delay
start
(Reservation) Wash
Option Washing
20
Other Useful Functions
22
Placing
and
Leveling
Supply
Connecting
Water
Connecting
Drain Hose
Grounding
23
Hose
Method
Cleaning
Troubleshooting
Specification
19
24
27
28
29
Cleaning
and Maintenance
30
Common
washing problems
31
Troubleshooting
32
Specification
33
you
4
S
afety Information
WARNING!
Read and follow this
safety information carefully.
safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
For your
Introducin
Save these instructions.
WATER HEATER
Under certain conditions hydrogen gas may be produced in a water heater that has not been
SAFETY
used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the
?
hot water has not been used for two weeks or more, prevent the possibility of damage or injury
by turning on all hot water faucets and allowing them to run for several minutes. Do this before
using any electrical appliance which is connected to the hot water system. This simple
procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do not
smoke or use an open flame or appliance during this process.
?
PROPER
Install or store where it will not be exposed to temperatures below freezing
or
exposed to the
weather.
INSTALLATION
?
Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
YOUR
?
LAUNDRY
AREA
?
Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
Close supervision is necessary if this appliance is used by or near children. Do not allow children
to
?
WHEN USING
?
THE WASHER
play on, with, or inside this or any other appliance.
Use this appliance only for its intended purpose as described in this Owner's Manual.
Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
?
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
?
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during
?
operation.
The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
follow the garment manufacturer's wash and care instructions.
?
To minimize the possibility of electric shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before attempting any maintenance or cleaning.
NOTE:
Pressing
Power button to turn off does NOT disconnect the appliance
from the power supply.
?
Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has
?
WHEN NOT IN
Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or
USE
?
missing or broken parts, including a damaged cord or plug.
rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
Before discarding a washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
?
?
Do not attempt to repair or replace any part of this appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
skills to carry out.
Do not tamper with controls.
5
I
dentification of Parts
Body
Introducin
?Drain
pump
Accessories
Water
supply hoses
Drain hose
or
or
1 Each for cold and
hot water
Note
*
Parts
can
be different
according
to the model.
hose for
model*
non
6
F
unction Information
Our machine
of laundry.
Different
Introducin
provides
various
washing
methods which suit various conditions and types
types of laundry washing
Fuzzy
(Normal)
Wash
Program for normal clothes except for woolen clothes and lingerie.
automatically detects the quantity of laundry and selects the appropriate
power, washing time, rinsing time and spinning time. (refer to page 14)
Use this
The
sensor
water
level, wash
Jean Wash
Thick and
(refer
heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed.
to page
14)
Delicate Wash
Use this program to wash delicate and washable laundries.
(refer to page 14)
Wool Wash
Delicate clothes
(lingerie, wool, etc.) which may be easily damaged can be washed.
The fibers of machine washable woolens have been
(refer to page 14)
specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
?
Before washing your woolens check the care label for the washing instructions.
washing woolens use a mild detergent recommended for washing wool.
?
When
?
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
?
tumble action of a
(The heat and
of woolen
dryer may
shrinkage felting
garments.)
underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.) You may wish to
handwash these articles and place them in the machine to spin dry.
cause
or
Some wool
Favourite wash
This
setting allows
(Memory wash)
you to store your favorite wash condition in the normal
Washing according
to the condition of
cycle memory.
(refer to page 16)
laundry
Speedy Wash
Speedy wash can be
selected to wash
moderately
soiled clothes of less than 3.2 kg in
Soak Wash
Soak Wash
and
grime.
can
a
short time.
(refer to page 17)
be selected to wash
heavily soiled laundry by soaking in water for some time to remove dirt
(refer to page 18)
Other washing method
Delay
start
(Reservation) Wash
Delay start (Reservation) Wash is used to delay the finishing time of the operation.
Delayed start washing can be set according to preference.
(refer to page 19)
Option Wash
Spin, Wash, Wash/Rinse, or Rinse, Rinse/Spin only options
can
selected.
(refer to page 20)
7
P
reparation Before Washing
Care Labels
*
BeforStaingWsh
a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Look for
Sort clothes into loads that
can
be washed with the
same
wash
cycle, water temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
?
SOIL
?
COLOR (Whites, Lights, Darks)
LINT (Lint producers, Collectors)
?
(Heavy, Normal, Light)
Lint Producers
Terry cloth, Chenile, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Check before
?
?
?
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
coins, and keys
Pretreat any dirt and stains.
sure the clothes are washable in water.
?
Make
?
Check the
?
on
stains
or
heavy
soil
Pretreat shirt collars and cuffs with
Before
?
WIRE
washing instructions.
Remove tissue in pockets.
Pretreatment
?
Loading
Check all
pens,
?
Separate clothes according to the type and amount of soil.
Separate white fabrics from colored fabrics.
Separate lint producers and lint collectors.
Use
a
a pre-wash product or liquid detergent when placing them in the washer.
washing treat special stains with bar soaps, liquid detergent or a paste of water and granular detergent.
pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The
longer they are left the harder they are to remove.
(For more detail refer to page11)
Loading
Do not wash fabrics
Load Size
The water level should just
cover
the clothes.
Adjust the load size accordingly.
Loosely load clothes no higher than the top row of holes in the washer tub. To
add items after washer has started, press Start button and submerge additional
items. Close the lid and press Start button again to restart.
Light
and
WARNING
containing flammable materials (waxes, cleaning fluids, etc.).
Large-sized clothing
Clothes like downs and woollens
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
light weight, large and float easily. Use a nylon net and
laundry floats during the wash cycle, it may
become damaged. Use dissolved detergent to prevent the detergent from clumping.
wash them in
a
are
small amount of water. If the
Long laundry items
nylon nets for long, delicate items. For laundry with long strings or long length a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Use
,
8
U
BeforStaingWsh
Using
se
of Water,
Detergent, Bleach and Softener
Water
Amount of Water Level
This machine detects the
quantity of laundry automatically, then
level and proper amount of detergent.
?
EX LARGE
-
When you select a wash program, the water level and amount of detergent
will be shown on the control panel.
?
WATER DETERGENT
sets the water
LARGE
(to be used)
MEDIUM
SMALL
following table shows the amount of water.
When the water level is automatically detected, it may differ depending on the
quantity of laundry even though the same water level is indicated on the control panel.
The amount of a cup in the diagram is about 40g for concentrated detergent.
The
?
?
?
NOTE
[ Minimum water amount ]
depends on laundry load and washer model. Or manually you can pour a certain amount water into tub
directly to some height. That's because if water level reaches to the some height sensed by washer itself, washer
automatically operates. In other words, it is needed to pour water to the point when washer starts operating.
It
Water
temperature
?
The machine sets the
?
You
can
appropriate temperature automatically according to the wash program
change the water temperature by pressing the WATER TEMP. button.
The temperature of the water
?
impacts the effectiveness of all laundry additives and therefore, the cleaning results.
We recommend temperatures of:
HOT 49~60°C...(120-140˚F)
-
-
-
WARM
COLD*
.
29~40°C...(85-105˚F)
18~24°C...(65-75˚F)
White
items, diapers, underclothing and heavily soiled, colorfast items.
Most items
Only very bright colors
with
light soil.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
?
-
-
-
-
*
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18°C...(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.
In addition, detergent manufactures and care labels define cold water as 26~29°C...(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate and clean effectively.
NOTE
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or orange
spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be necessary for severe cases.
Using Detergent
Detergent
Follow the
Use
more
detergent package directions. Using too little detergent is a common cause of laundry problems.
detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.
Choosing the right detergent
of domestic detergent, (powder, liquid or concentrated). Soap flakes or
granulated soap powders should not be used in your washing machine. When washing woolens
remember to use detergent suitable for washing woolens.
We recommend the
use
9
Using Detergent
How much
detergent
When you select a wash program the water level and the amount of detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated
detergent.
The correct amount of detergent will vary depending on the amount of soil in your clothes
and work cloches may need more detergent, while bath towels usually need less.).
For
(Jeans
liquid and concentrated detergents, follow the recommendations of the detergent manufacturer.
Note: To check you are using the correct amount of detergent, lift the lid of your machine
about half-way through the wash. There should be a thin layer of foam over the surface of the
water. Lots of foam may look
foam
means
not
good, but it does not contribute to cleaning your clothes. No
enough detergent has been used; soil and lint can settle back on the clothes or
washing machine.
detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
the
If excess
Attention
Adding
the
detergent
Powder Detergent / Fabric Softener dispenser.
Open the detergent dispenser and deposit the appropriate
amount of detergent
Where you
where you deposit the detergent
deposit the
Powder Detergent dispenser.
detergent
Some detergents MUST be fully dissolved before
adding to your machine to get the best wash results.
Check the instructions on the detergent packet.
If you use powdered detergent it is essential that the required amount be fully dissolved in very hot water
before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
Using Liquid
?
?
?
?
Bleach
Bleach
clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Check
dispenser
()
Attention
Never pour undiluted liquid bleach directly onto clothes
This may cause change of color or damage the laundry.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can reduce
toxic gas which may cause death.
Do not pour powdered bleach into bleach
or
acids such
a
dispenser.
BeforStaingWsh
10
U
BeforStaingWsh
Using
of Water,
se
Detergent, Bleach and Softener
Fabric Softener
Available Fabric Softener
?
Do not
?
For
use
concentrated fabric softener. This may cause some problems in automatic
products instructions for use.
Depositing
Fabric Softener
Don't use softener with
detergent. Use
Powder
softener in last rinse water
?
?
?
?
dispensing.
details refer to the softener
more
?
Type
Detergent / Fabric Softener dispenser.
Where you deposit
the softener
using dispenser, dilute softener (30ml)
with fresh water (30ml)
When filling dispenser, do not splash or
When
overfill. It may stain clothes.
Never pour fabric softener directly
Limit Line
on
Depositing
clothes.
It may stain them
If spotting occurs, wet and rub with hand
If the softener is over
filled, it can overflow.
dishwashing liquid (or mild bar soap) and
Fabr ic
Softener
Cap
softener
don't fill it
above the
limit line.
rewash.
Note
Fabric Softener will be inserted
automatically during
the final rinse and the machine
When water pressure is low, the softener may have to be inserted
Scrud(Waxy
Build
gives
on
alarm sound.
manually.
up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it
smell in your washer.
If you wish to
?
?
?
?
?
use
fabric softener
we
result in stains
on
your clothes
or an
unpleasant
recommend
Using fabric softener sparingly.
filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 30)
Cold water washing increases the chance of this build-up occurring. We recommend a regular warm or hot
When
wash e.g. every 5th wash should be at least
?
can
Fabric softener of thinner
build-up.
consistency
a warm one.
is less
likely to leave residue on the dispenser and contribute to a
11
pecial Guide for Stain Removal
S
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
?
?
?
?
?
?
For successful stain removal:
?
Remove stains
?
Determine the kind of
promptly.
stain, then follow the recommended treatment in the stain
removal chart below.
product, liquid detergent, or a paste made from
?
To pretreat stains, use a prewash
granular detergent and water.
?
Use cold water
?
Check
?
Check for colorfastness
?
Rinse and wash items after stain removal.
care
on
unknown stains because hot water
label instructions for treatments to avoid
by testing
stain
can
on
remover on an
set stains.
specific fabrics.
inside
seam.
Follow fabric
care
label
instructions
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using cold water and bleach safe for fabric.
Rinse with cold water. Rub with bar soap. Or pretreat
safe for fabric.
or
soak with
product containing enzymes. Wash using bleach
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in warm water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and hot water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub detergent into dampened area, Wash using bleach
safe for fabric.
BeforStaingWsh
12
F unction of each Button
Time
BeforStaingWsh
start
left, Delay
(Reservation), Alarm indication
remaining time is indicated, and while paused, the washing time, rinsing time,
spin
example, while washing, "1:09" indicates the time combined remaining for wash,
and
When
indicates a wash time of 15minutes, 2 Rinse times, and 6 minute
rinse,
spin cycles.
paused
time.
spin
Time left
and
-
During operation,
the
time is indicated. For
,
Delay start (Reservation) indication
finishing time. (RES. DELAY)
-
When
Delay
start
(Reservation)
program is
selected, it
indicates for the
=
Alarm indication
-
When
an error
occurs,
an error
message appears to indicate the
abnormality.
How to select Temp.
?
Used to select proper water
temperature of washing
water.
[COLD WARM (Hot and
cold light turn on)
HOT
COLD ] mode repeats.
WARM
WATER DETERGENT
SOAK
EX LARGE
-
HOT
COLD
S TRONG
LARGE
LEVEL
DELAY
N ORMAL
MEDIUM
Delay start (Reservation)
G ENTLE
SMALL
TIME
LEFT
button
?
Use to set
a delayed
finishing time.The time
ASH
increases when the button is
pushed.
(refer to page 19)
Water level button
(indication of detergent amount)
adjust the water level as required. The appropriate amount of
detergent is shown next to the water level in the WATERDETERGENT diagram
?Water level is automatically selected for fuzzy normal and jean
?Use to
programs.
The following
LARGE
settings
are
indicated
as
LARGE, EX-LARGE
SMALL, MEDIUM
MEDIUM
the button is
EX-LARGE
?
This button allows you to select the
of the water current.
?
Power
may differ
according
MEDIUM, LARGE
to different models.
pushed.
This
can
for any program, but when
starts with Strong.
?
panel
option selections light up in
the button is
SMALL
Note
strength
sequence as follows NORMAL
STRONG
GENTLE
NORMAL
pushed
LARGE
The control
Wash power button
as
be selected
washing jeans, it
Adjustment can be made while washing.
W
WASH
13
Program
Washing progress
Indicator
?
?
?
?
The
cycle name is to show the
washing progress.
The light turns on for the
process to be progressed,
flickers during cycle operation,
and it turns off automatically at
the cycle's completion.
selecting wash program.
This button allows you to select 6
different programs for different kinds
Use for
and dirtiness.
of
?
AUTO OFF
button
laundry
Program selections light up in
sequence
follows: FUZZY (NORMAL)
JEAN
DELICATE
SPEEDY
FAVOURITE
?
Use to turn the power on or off.
Push again and power goes on or
off.
?
as
WOOL
?
(Power) button
The power goes off automatically
for about 10 seconds after the wash
is finished.
FUZZY
(NORMAL), by pressing the button.
Start/ Pause button
?
?
SHOWER
RINSE
SPIN
INLET Er.
FUZZY
FAVOURITE
DELICATE
WOOL
?
DRAIN Er.
SPEEDY
DOOR Er.
JEAN
Use to start
or
pause the
washing process.
Repeats start and pause by
pushing the button.
The power goes off
automatically 10 minutes after
stopping.
STAR
SPIN Er.
AUSE
SPIN
RINSE
Child lock function
?
Use to lock
or
Wash. Rinse.
unlock the control buttons to
prevent settings from being changed by
a
child.
?
?
?
?
To
lock, push rinse, spin buttons
simultaneously and to unlocking push them
one more time during the washing process.
?
Spin
button
Use when wash, rinse,
spin time need to be adjusted.
pressed
If adjustments are needed during the wash, press the [start/pause]
button before making any changes.
When the button is pressed during washing, the remaining time
is displayed.
(refer to page 20, 21)
The time increases when the button is
.
(refer to page 22)
:
3 step works at
large and medium water level of Fuzzy and Jean Program.
BeforStaingWsh
14
W ashing Programs
※
WashingProm
The figure within
arrow
is
processing order manually.
Add
the
Washing
Programs
PROGRAM
laundry
Fuzzy Washing
1
PROCESS
Add
the detergent
2
4
(Normal Wash)
Used for normal
mode
most
loads, this
automatically
appropriate
completes
operation.
・Add the
selects the
appropriate
of
quantity
conditions and
as
the sequence in one
The built-in sensor
detergent
by the
indicated
water level next to
WATER-DETERGENT.
detects the size of the load and
Or follow the
the ideal wash power and wash,
rinse and spin times are set
detergent
manufacturer's
Instructions
accordingly.
Jean Wash
Use
1
3
program when
heavy, thick, and
2
5
jeans
washing
extremely dirty laundry
jeans
such
・Select the
as
Jean
and work outfits.
program on
the Control
panel.
Delicate
1
This would include
5
2
3
Use this program to wash items
requiring a gentle wash action.
・Select the
blouses,
Delicate
and dress shirts with
nylons
light soiled.
program on
the Control
panel.
Wool Wash
Use this program for
delicate fabrics such
washing
as
lingerie
1
3
and woolens.
(wash only
clothes)
Before
"water washable"
check the
care
your woolens
label for the
instructions.
washing
(wash only
clothes)
・Select the
Wool
washing
water
washable
5
2
program on
the Control
panel.
・Use neutral
detergent
appropriate
for the
laundry.
・When washing
woolens
use a
mild
detergent
recommend- ed for
washing wool.
15
Close the lid
3
Finish
Caution & Note
6
5
・If water is
already
the tub before
・The
pulsator
rotates
for
8 seconds to detect the
laundry
load.
・Then the water level
and the amount of
detergent to
be used
supplied
・When the wash
for 2
minutes after the
start
of the wash to
supplement the
laundry
water the
water will be
has absorbed.
program ends,
the buzzer will
ring
for 10
or
putting
wet
laundry
into
light weight bulky, water level can be set low.
・Changes to water temperature (hot/cold) and wash level
are
possible during operation.
(refer to page 12)
seconds before
the Power goes
off automatically.
4
6
7
4
6
7
・Before
starting to wash,
setting the
sure
that the
laundry
is
manually, do not set to
to laundry.
with
hot
water
・Washing
may damage the laundry
(Water is set to cold automatically). Ensure that the load
is under 2kg.
・To dry woolens lay down them flat on a towel and pat
into shape. Dry woolens out of direct sunlight.(The heat
and tumble action of a dryer may cause shrinkage or
felting of woolen garments.)
・In order to avoid damage to laundry, the spin cycle
MEDIUM to
6
make
washable.
・When
4
tub,
will increase the water level.
・With
・Water will be
will be shown and
supplied.
in the
starting
7
water level
prevent damage
may appear slow. This also avoids wrinkles and
clothing may still contain some water. This is normal.
・Soak Wash cannot be selected for the Wool Wash
program.
WashingProm
16
F
WashingProm
?
avourite Wash
Pressing
the
favourite
Program
button allows you to store your
favourite
conditions in the normal cycle memory and then recall it for
time.
1
Press the AUTO OFF (Power) button to turn power
2
Select the FAVOURITE program.
FUZZY
FAVOURITE
DELICATE
WOOL
SPEEDY
JEAN
use
wash
at a later
on.
PROGRAM
3
Select your favourite wash conditions.
?
Press the WATER TEMP. button to select wash water
temperature.
?
Press the WATER LEVEL button to select water level.
?
Press the WASH POWER to select STRONG
GENTLE wash
?
option.
Press the WASH
button, the RINSE button & the SPIN
button to select wash time, rinse times &
respectively
4
To recall your
favourite cycle.
1. Press POWER
on.
2. Select the favourite
cycle by pressing
the PROGRAM.
3. Press the START/PAUSE button. Then the wash
cycle
starts.
spin time
you want to store.
Press the START/PAUSE button to store & start your favourite wash
Power turns off automatically after wash.
Note
or
cycle.
17
S
peedy Wash
Use this mode when washing lightly soilded clothes for
The weight should be under 3.0kg.
1
Press the POWER button to turn power
2
Press the PROGRAM button to select SPEEDY.
a
short time.
WashingProm
on.
Select the SPEEDY program
on
the Control
panel.
PROGRAM
3
Add the
detergent.
The
appropriate quantity of detergent marked next to the
water
4
Add the
laundry
level of WATER-DETERGENT.
and press the START/PAUSE button.
The water level and the amount of detergent to be used will
be shown and water will be
5
Close the lid.
Finish
supplied.
Water will be
wash to
supplied for 2 minutes after the start of the
supplement the the laundry has absorbed.
When the wash program ends the buzzer will ring for
10seconds before the Power goes off automatically.
18
S
WashingProm
oak Wash
washing excessively dirty laundry by soaking in water for some time to
proteins and fats. ‘SOAK’ mode can be used with all washing programs
simultaneously except for WOOL and DELICATE program.
Use this mode for
remove
1
Press the AUTO OFF (Power) button to turn power
on.
2
Press the PROGRAM button to select the
program.
The SOAK will not work in WOOL and DELICATE
PROGRAM
3
Press the WASH
washing
button,
to
select SOAK program.
Keep pressing the WASH button until
the light turns on‘Soak’and‘Wash’
simultaneously as next image.
SOAK program only works when socking
time is
4
Add the
detergent.
The
Add the
laundry
40, 50
or
SOAK
WASH
60 minutes.
appropriate quantity of detergent marked next to the
water
5
cleaning
Program.
level of WATER-DETERGENT.
and press the START/PAUSE button.
The water level and the amount of
be shown and water will be
6
detergent to be used
supplied.
Water will be
Close the lid.
wash to
Finish
supplied for 2 minutes after the start of the
supplement the absorbed water by the laundry.
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Note
Order of Soak-Wash
?
timing
Soak-Wash
min
?
?
min
min
min
min
min
Lamp
Select soaking time 40minutes, 50minutes,
the Wash button repeatedly.
Off
or
will
min
min
60minutes
If necessary, select the times of Rinse and the time for
buttons till you reach the desired times.
min
min
min
(including washing time) by pressing
Spinning by pressing
the Rinse
or
Spin
19
D
elay start (Reservation) Wash
start (Reservation) Wash is used to delay the finishing time of the
hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
Delay
operation.
The
,
1
Press the AUTO OFF
2
Press the PROGRAM button to select the
(Power) button
?
PROGRAM
3
Press the DELAY START
AditonalFucOps
to turn power on.
washing program.
Select the program for laundry on the Control
This method will not work in Wool Program.
(RESERVATION)
The
?
panel.
button.
light will
'
DELAY' turn
on
and 'TIME LEFT'
will be marked.
Press the button
repeatedly to set the desired finishing time.
example,
washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION ) button repeatedly.
?
To finish
For
R EMOJO
(RES.=DELAY)
4
Add the
The
?
detergent.
Add the
laundry
REMOJO
CENTRIFUGADO
Er. TOMA
LAVADO
CASCADA ENJUAGUE
CENTRIFUGADO
Er. TOMA
RES.
Er. DESAGUE
Er. PUERTA
Er. CENTRIFUGADO
of
Er. PUERTA
TIEMPO
REST.
Er. CENTRIFUGADO
detergent marked next to the
level of WATER-DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid.
an
and press the START/PAUSE button.
?
6
CASCADA ENJUAGUE
Er. DESAGUE
appropriate quantity
water
?
5
LAVADO
RES.
TIEMPO
REST.
?
Close the lid.
When you press the START/PAUSE button the
blink and the time will be shown.
Water will be
wash to
Finish
light will
The
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
washing will be finished according to the delayed time.
Note
?
time
Finishing
be
can
delayed
from 3~48hours.
Delaying
from3~12hours
can
be done in 1 hour time
intervals and from 12~48hours in 2 hour time intervals.
?
If the lid is open, the machine will not work, and
an
alarm
signal will
alarm to remind you to close the
lid.
?
To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually,
press the DELAY START (RESERVATION) button and select the desired option. Then press the
START/PAUSE button.
?
laundry cannot be taken out immediately after the wash program ends, it is
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
better to omit the
20
0
AditonalFucOps
1
ption Washing
When you
only
need the Wash, Wash/Rinse
or
Rinse
cycles,
these
can
be set
manually.
Press the AUTO OFF (Power) button to turn power
2
Only Wash
Only Wash,Rinse
Press the WA S H button to select the
desired
timing.
on.
(refer to page 13)
Press the WA S H button to select the
desired timing.
(refer to page 13)
Press the RINSE button to select the
desired times of rinse.
(refer to page 13)
You can use this option for
wrinkles of laundry
3
Press the WATER LEVEL
level
of
laundry.
automatically.
amount
button,
control the
(refer to page 12)
4
Add the
laundry
5
Press the
START/PAUSE button.
6
Add the
into the
detergent
to
If you do not choose
washing
tub.
and close the lid.
water
anything,
level
preventing
according
to
the
it is set the middle water
21
1
Press the AUTO OFF (Power) button to turn power
2
Only
on.
Only Rinse,Spin
Rinse
Only Spin/Only drain
Press the RINSE button to
Press the RINSE button to
Press the SPIN button to
select the desired times of
rinse.
(refer to page 13)
select the desired times of
rinse. (refer to page 13)
select the desired times of
spin.
(refer to page 13)
Press the SPIN button to
select the desired times of
spin.
3
(refer to page 13)
Press the WATER LEVEL button to control the water
level according to the amount of laundry. (refer to page 12)
4
Add the
5
Press the
6
Add the
laundry
into the
washing
When you want to only
drain, wait until the water in
the washing tub drains
completely.
tub.
START/PAUSE button.
detergent
and close the lid.
Note
When
a
Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the
water will not be drained off. If you wish to drain the water, press SPIN button and wait until the
water in the tub has drained completely. Then press the START/PAUSE button.
If you do not specify the water level, then Medium will be automatically selected.
If only Rinse is selected, the process will start from Water Supply.
AditonalFucOps
22
O
ther Useful Functions
Child Lock Function
AditonFucOps
If you want to lock all the
use
the child lock
keys to prevent all the setting from being changed by a child, you can
option.
How to Lock
1
Press the AUTO
OFF(Power)
button.
Turn Power
2
Press the START/PAUSE button to start
washing.
After all
3
on.
washing
Press both the RINSE button and the SPIN button
SOAK
WASH
SHOWER
RINSE
SPIN
INLET Er.
DELAY
DRAIN Er.
DOOR Er.
TIME
LEFT
SPIN Er.
ASH
RINSE
conditions
are
set
according to the manual.
simultaneously.
During the wash program, all the buttons are locked
washing is completed or it is child- lock
function is deactivated manually.
until
SPIN
How to Unlock
If you want to unlock
during wash, press both the RINSE
and the SPIN button
simultaneously again.
Note
"
Mute
"
& the
remaining
time
are
alternatively shown
on
the
display while they
are
locked.
Option
If you want to use the washing machine without alarm
buttons simultaneously.
signal sounds, press both the
To make buzzer work, press both the WASH and SPIN buttons
Seeing Remaining
To
The
simultaneously one more time.
Time
remaining time for each process, press one of the WASH, RINSE
remaining time for each process will appear for about 1 second.
see
the
WASH and SPIN
and SPIN buttons.
23
P
1
lacing and Leveling
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm to the
right side and left sides of the machine for ease of
more
installation.
At the rear,
a
than 10cm
minimum clearance of 10cm is
suggested.
more
than
2cm
more
than 2cm
Caution
If the washer is installed
spin
failure
It must be
2
or
on a
"SPIN Er."
placed
on a
uneven,weak or tilted floor causing excessive vibration,
can
happen to it.
firm and level floor to prevent
Check that the machine is level
spin failure.
Top view of the machine
Open the lid and look from above to see if it is
same as
shown. Check that the bubble of the level
indicator is
placed in the center.
Level indicator
3
Leveling
Level indicator
the machine
Lift the front of the
washing machine and twist
the
until the surface bubble is
Adjustable Leg
placed in the center.
Adjustable legs
Level indicator
Caution
appliance is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
If the
Instal ion
24
C
Instal ion
onnecting Water Supply Hose
Connecting
Before connecting the Water Supply Hose to the water tap, check the hose type and then
choose the correct instruction here under. Note that the Water Supply Hose supplied may
vary from country to country. Make sure to connect the blue inlet hose to the cold water tap,
and the orange inlet hose to the hot water tap.
Water
Normal
1
Supply
Hose to water
Type
Untighten
the
tap
(Normal tap without thread &
screw
type inlet hose.)
Rubber
screw
packing
Untighten the screw of the connector so that the
can be placed in the middle.
screw
tap
2
Fixing the
connector to
Connector
the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4
3
screws.
Attach the water
to the connector
Push the water
supply
hose
connects
supply hose vertically upwards
that the rubber seal within the hose
can
securely
so
Connector
adhere
completely to the tap.
Water
Supply
4
Fixing the
connector to
the
water
supply
hose
Attach the water
then
5
supply hose to the connector and
tighten it by screwing it to the right.
Check the connection of
After
water
supply
connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step
1
hose and the
connector
Hose
25
Normal
1
Type
(Normal tap without thread & one touch type inlet hose.)
Separate Middle
connector
from Water
Supply
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose while pressing them.
Hose
Middle
Fixed Sticker
connector
Pressing
Handle
Pressing
Rod
Water
2
Loosen the fixed nuts to connect the connector to the
Supply
Hose
tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber
packing
screw
Fixed sticker
Note
In
case
the tap is
too
large.
Guide
plate
Rubber
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
packing
plate.
3
Fixing
Connectors to the
Tap
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Connector and Middle Connector
Fixing Upper
Remove the fixed sticker in between the
Connector
Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connecting Middle
Middle
Connector
Fixed sticker
Connector and Water
Supply
pressing rod of the Water Supply
separated from middle
connector(refer to Step1) and then join it to the
Connector
Middle
Connector
Hose
Press down the
Hose which
was
Pressing
rod
middle connector.
Water
6
Check for the
water
leakage
After
the
hose, open the tap to check
connecting
water
for any
leakage.
If the connection
leaks, close the tap and
again from step 1.
If you skip step1, Water
start
leakage may occur.
Supply
Hose
Pressing
handle
Instal ion
26
C
Instal ion
onnecting Water Supply Hose
Screw
1
Type
Attach the
water
supply
hose
to
the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber
Water
2
Connect the water
supply
hose
to
Packing
Supply
the tap.
Connect the water
tighten it by
supply hose to the tap and then
screwing it to the right.
3
Check
water
leakage.
After
connecting the hose, open the tap to check
for any water leakage.
Connecting
Water
Supply
Hose to the machine
supply hose to inlet valve of
washing machine, and then lock it by turning
the hose connecting part.
Connect the water
the
Check to
see
if there is
a
rubber seal inside
Hose connector
the connector.
Rubber seal
Hose
27
C
onnecting Drain Hose
Before connecting Drain Hose, check your Drain Hose model and choose the correct
instructions.
Instal ion
Pump Model
1
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose
of the drain pump and
Fit the
holder at the
sure
the
Hose
Guide
holder into either holes for the
rear
The holder is
according
over
wash tub.
standpipe
plastic
or
tighten the clamp.
of the machine.
possible
Wi thin 5 0 m m
to fit at either direction
to location of the
that the holder
standpipe. Make
keeps firmly the drain hose
that the drain hose should not fall down.
so
0.9~1.2m
Drain Hose
Note
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2 m from the floor.
~
1
None
Pump Model
Before
connecting
Ensure that the hose
clip is
set
as
indicted here.
Clip
2
Connect the Elbow Hose
Push the elbow hose toward the
body of the
washing machine.
3
Place the Drain Hose
change the direction of the hose, pull out the
change the direction.
Repeat Step2.
To
elbow hose and
guide.
28
G
rounding Method
Earth wire should be connected.
If the earth wire is not connected, there is
current
CarendMitc
Grounding
possible danger
of electric shock caused
by the
leakage.
Method with Ground insert space Terminal
If the AC current outlet has
Ground
ground terminal, then separate
grounding is not required. Note that AC power outlet configurations
a
Terminal
may differ from country to country.
Outlet with
Caution
ground terminal.
CAUTION
concerning the Power Cord
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers
that
only
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
Most
Other
Grounding
Method
Burying Copper Plate
Connect the Ground Wire to
Plate and
bury it
more
a
Ground
Copper
ground.
than 75cm in the
Ground Wire
75cm
Ground
Using Ground
Copper Plate
Wire
Ground
Wire
Connect the
ground Wire to the socket provided
exclusively
Grounding.
for
Using Short
Circuit Breaker
If grounding methods described above
possible,
employed
are
not
Short-circuit
breaker
separate circuit breaker should be
and installed by a qualified electrician.
a
Caution
To prevent a possible explosion, do not connect ground to a gas
Do not connect ground to telephone wires or lightning rods.
pipe.
dangerous during electrical storms..
Connecting ground to plastic has no effect.
This may be
Ground wires should be connected when
an
extension cord is used.
29
C
leaning
When water supply into the tub is not clean or the filter is clogged with particles(such as
sands...), clean the filter in the inlet valve occasionally.The figure of power cord and water
tap may vary according to the country.
CarendMitc
To Clean the Filter in the Inlet Valve
1
Close the tap before
off the power.
2
turning
Select both hot/cold and then
press the
button to
cord.
[START/PAUSE]
remove
the machine
3
from
water
completely.
4
After
removing the water
supply hose pull out the filter.
Then
Turn off the power
pulling out the
before
use a
Replace the filter
after cleaning it.
brush to clean
the filter.
Caution
?
Before
cleaning the filter, the impurities
in the water
supply hose
should be removed.
To Clean the Lint Filter
1
2
Pull out the lint filter from
3
Turn the net inside out
the tub in the direction
to clean the filter and
shown below.
rinse it with water.
Replace- the filter to the
original location. Push the
lip of the filter until a pop
sound is heard.
Note
If the lint filter is torn
To Clean the
1
or
damaged, purchase a new one from LG service center.
Pump casing (for pump model)
Place a towel on the
floor under the drain
pump cap. Excess
water may flow out.
2
Turn the cap
counter-
3
clockwise and
pull it out.
Cap
Remove any foreign
objects and fluff inside
pump casing and from the
filter.
4
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Filter
Guide rib
Filter
Self-cleaning function(for pump model)
In the initial stage of every washing machine process, the drain pump works for 3~5seconds to pump out
water with dirt from the washing tub. It helps to keep the wash tub clean and improve pumping ability.
Caution
?
Check if water leaks after
reassembling. (The Rubber ring
is in the
cap)
30
C
CarendMitc
leaning and Maintenance
When there is
a
fear of
freezing
?
Close the
?
Remove the water which remains in the water
?
Lower the drain hose and drain the water in the bowl and the drain hose
water
taps and
remove
the Water
Supply Hose.
supply.
by spinning.
If frozen
?
?
?
supply hose, and immerse it in hot water at approx.. 40˚C.
Pour approx.. 2 liters of hot water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
Connect the water supply hose to the water tap and confirm that the washing machine performs the
Remove the water
supply and drainage of water.
Wash Inner-tub
Leave the lid open after
the inner-tub
use a
not use harsh or
Inlet Hoses
Be
evaporate. If you
liquid detergent,
want to clean
then rinse. (Do
gritty cleaners.)
supply is shut off
freezing.
sure water
be below
at faucets. Drain all water from hoses if weather will
Inside of your Washer
If you use fabric softener or do
the inside of your washer.
?
dampened
with
connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
Vacations
Cleaning the
to allow moisture to
Hoses
Exterior
Long
washing
clean soft cloth
regular cold water washing, it is
very
important that you occasionally clean
Fill your washer with hot water.
?
Add about two cups of
?
Let it operate for several minutes.
a
powdered detergent that contains phosphate.
?
Stop the washer, open the lid and leave it to
?
After
soaking,
drain the washer and
run
it
soak
overnight.
through a normal cycle.
We do not recommend that you wash clothes
during this procedure.
31
C
ommon
washing problems
Many washing problems involve
scum,
and fabric
damage.
instructions.
poor soil & stain
removal, residues of lint and
satisfactory washing results, follow these
For
Troubleshting
WASH PROBLEM
Problems
Poor soil
?
removal
Solutions & Preventive Measures
Possible Causes
?
?
?
?
?
Not
enough detergent
?
Wash water temperature
too low.
Overloading
Use correct amount of detergent for load size, amount of
soil and water hardness.
?
the washer
Use
hot water for normal soil.
warm or
Different water temperature may be
Incorrect wash
cycle
sorting
?
Do not pretreat stain
Reduce load size.
?
Wash with Jean
Incorrect
soil type.
required according to
(refer to page 8)
or
Soak(Turbo)
& Jean wash
cycle for
heavy soiled laundry.
?
Separate heavily soiled
?
Pretreat stain and
on
Blue Stains
?
Undiluted fabric softener
dispensed directly
onto
?
?
fabric
Black or gray
marks on
clothes
Rub the stain with bar soap. Wash.
Do not overfill fabric softener
liquid fabric
buildup
caused
by
the
softener
softener and
detergent
?
Not
Iron
or
stains
or
manganese in
supply,
water
Use correct amount of detergent for load size, amount of soil
and water hardness.
?
To restore discolored load of whites,
use
rust remover safe
for fabric.
pipes,
water heater
instructions.
?
enough detergent
water
more
Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page10.)
can
flake off and mark clothes
dispenser and do not pour
directly onto fabric.
?
interaction of fabric
?
Yellow or
brown rust
A
lightly soiled ones.
heavy soil according to directions shown
page 7.
See page 10 for
?
items from
?
Install
nonprecipitating water softener or an iron filter in
supply system for an ongoing problem.
Before washing, run water for a few minutes to clear lines.
your water
?
Lint
?
?
?
Incorrect
sorting
Tissues left in pocket
Overloading the washer
?
Wash lint
givers
eg
towels, flannelette sheets, separately
from lint collectors eg
pockets before
synthetic fabrics and remove tissues
sorting and caring
wash. See page 7 for
before loading.
?
Residue
or
detergent
?
?
?
Overloading
the washer
Undissolved
Use too
detergent
much detergent
?
Do not overload the washer.
?
Some
?
?
Holes, tears,
or
?
snags
?
?
?
?
Incorrect use of chlorine
bleach.
Unfastened zippers,
hooks, buckles
Ribs, tears and broken
threads
Overloading the washer
Degradation of fabric
Do not overload the washer
?
detergents need to be pre-dissolved, check the
detergent instructions. Try pre-dissolving the detergent.
Increase water temperature using hot water safe for fabric.
Use proper amount of detergent.
Never pour chlorine bleach
See page 9 for
?
directly on fabric.
adding liquid bleach.
zippers, hooks, and buckles.
objects in pockets. See page 7
loading.
Fasten
?
Remove
?
Do not overload the washer.
for
caring before
in
32
T roubleshooting
Before
Troubleshting
calling
for service check the
Symptom
Water
Supply
Failure
Error
problem against
the list belows.
Message
INLET Er.
Check up
.
Is the water tap shut off?
.
Is the water
.
Is the tap
.
supply cut off ?
water supply hose frozen ?
Is the water pressure low
valve
.
or
or
is the filter of the inlet
clogged with impurities?
Is Hot/Cold selected to Hot when the hose connected is
Cold?
.
Drainage
Spin
Failure
Failure
Door(Lid) Open
Internal
failure
sensing
Power failure
Overflow failure
DRAIN Er.
.
Is the drain hose
.
Is the drain hose bent
.
Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
.
Check if electric power has gone off.
positioned correctly?
or placed too high?
.
Is the
laundry evenly balanced?
.
Is the
washing machine placed on a flat
.
Is the lid closed?
SPIN Er.
DOOR Er.
Is the Cold hose connected to Hot?
.
surface?
Please call your nearest LG Electronics Service Center
for help.
33
S
pecification
Specifaton
1 00 7m m
925 mm
625mm
625mm
Model
WF-T1022TP(H)/S, WF-T1122TP(H)/S,
WF-T1022TPX
WF-T1268TH, WF-T1022THX, LWD-1022S,
kg
Weight
47
Size
625(W)x625(D)x1007(H)
Water tab pressure
30 -800 kPa
(0.3
-8
2
kgf /cm )
WF-T1222THX
M
emo
P/No.: 3828EA3015F
Download PDF