LG | WF-T1031TP | LG WF-T1031TP Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WF-T1031TP
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
cover
information to your dealer when you
and
require
quote this
service.
P/No.: 3828FA3848N
Product Features
CAUTION
"Turbo Drum" washer doesn't operate during the lid opened. When the lid is
open during the wash, rinse and spin cycle, the operation stops for safety.
Fuzzy logic control
A load
set
micro processor in the controller detect laundry load and
washing conditions such as water level, wash time etc.
&
sensor
optimum
a
The most advanced
electronic control
the best
technology
in
system provides
START
SENSING
SETTING
Laundry Sensor
Optimum
Washing
Water Level Sensor
Condition
washing performance.
Turbo drum
When "Punch
washing
washing wings turns, the washing
tub turns in the opposite direction. This makes the both
sides current of water which improve wash-performance by rubbing clothes strongly.
3"
+
Innovated
washing wings
Three small
washing wings generate strong and
sharp washing currents to clean laundry uniformly.
Adjusted vertical movement and rotating direction
of the washing punch reduces laundry entanglement
and improves washing power.
Device for
removing naps
Lint filter catches naps and thread generated
washing to make the laundry cleaner.
Strong spin
By employing
a
strong spin method, laundry
becomes much cleaner.
2
during
WASHING
AUTO
POWER
OFF
Contents
SpecialAttentionforSafety...................................4
NameofEachPart..........................................7
Installation................................................8
FunctionofEachButton.....................................12
NormalWashProgram......................................14
HeavyWashProgram......................................16
SpeedyWashProgram.....................................18
GhutraWashProgram......................................20
DelayStartWashingProgram................................22
SoakWashProgram.......................................24
Selectable
Washing
Methods for Water Reuse & Others
.
.
.
.
.
.
.
.
.
.
.
.26
WaterLevelandAmountofDetergent..........................28
HowtoUsetheBleachandtheSoftener........................29
Basic of
Selecting
Each Button and Child Lock Selection
.
.
.
.
.
.
.
.
.
.
.30
MaintainingtheWasher.....................................31
TroubleshootingGuide......................................33
Specifications.............................................35
3
Special
Attention for
Safety
Following signs of special attention for safety are to prevent from unexpected danger
damages by using the washing machine properly and safely.
of
It is classified into "caution" and "attention".
This
signs
for
are
possible
situation of
follow the direction to avoid any
Caution
:
There
signs
Attention
:
might
are
There
have
They
be
meanings
dangerous
damages.
possible
of
following.
items and
operation.
circumstances for serious
injury
Please read
of
even
carefully
and
death, when this
violated.
might
be
possible
circumstances for
light injury
or
damages
of the
product.
Caution
Please ground it or connect to circuit breaker before
inserting power plug into outlet.
If it's not grounded, machine troubles of electric
shock
can
be occurred in
case
Please pay attention to children not to climb up
injured
or
washing
or
causes
injury.
or
to
Do not
put your foot
Spin part
fall down.
hands under
product
washing
machine.
can cause
injury.
Do not operate near places where there are ignitability, gasoline benzene and flammable gas leakage and
do not wash any flammable strained
clothes. It can causes
explosion
4
or
underneath of the
spin part.
machine when you
use
prop.
Possible to get
repairing when spin doesn't stop within
opening the washing machine lid. It
15 seconds after
of short circuit
get into the product.
Possible to get injured by falling
Be careful not to fall into
Please ask for
of fire.
Do not
operate it when the plug is loose.
Damaged plug
Do not
can cause
electric shock
put your hands in during
use or
or
fire.
before it
stops
com-
pletely.
You
is
get injured
can
caught
Do not
hands
place
it
near
can
Do not
place washing
exposed
places
for rain & wind.
electric
heaters, candles,
or
gas leak.
firearms.
& cord
Do not
machine in wet
places
or
shock, fire, machine trouble and
transformation
plastic
caused fire
a
Electric
in the clothes.
Transformation of
melting
as
Please open the window to let fresh air in when
cause fire, explosion or burn.
Spark can
can
be caused.
sprinkle water to the body
Electric shock & fire
can
of
washing
machine.
be caused.
or
electric shock.
Do not
put any magnetic stuff
on
the
top of the washing
machine.
Fallacy of operation
injury.
can
cause
Do not
use on
Do not
disjoint or
rebuild
washing
machine
except techni-
cians.
outlet for many machineries.
can cause fire.
Over usage of outlet
Fire, electric shock
can
be
caused.
Do not
damage the power cord by placing heavy things
covering it.
If the cord is damaged, it can
it
on
or
cause
fire
or
electric shock.
5
Attention for
Special
Safety
Because the
product is quite heavy, so more than
people should carry it when untie or place it.
Damage or injury can be caused by
dropping or striking.
Do not press a pin or awl.
It can cause electric shock.
Place it
Check if there is dusts
two
on
Vibration
flat and solid floor.
or
noise
can
be caused.
on
if there is dusts
pletely,
unstable,
a
fire
can
on
the
the
plug then insert it complug or connection is
be
caused.
Do not
place
any
heavy things
on
the
top of it.
Turn the
If
tap
on or
screws are
check connection.
loose,
water leaks and that can
electric shock
cause
or
injury.
Handle the
It
causes
plug
and switches with dried hands.
electric shock
or
ignition.
Do not
use more
Plastic
parts might be transformed
damaged
that
than 70°C hot water.
causes
or
electric
shock short circuit.
Do not wash the
Abnormal tremor
watherproof clothes or fabrics.
can cause injury during spin.
Pull out the
use
for
long
plug during cleaning
time.
Water and dusts
can cause
electric shock and short
circuit
by ignition
calorification.
6
or
or
when you don't
Name of Each Part
Inlet hose
Control button
Start/Pause button
Power
Lint filters
plug
Power switch
Bleach inlet hole
Drain hose
High-intensity
washing tub
stainless
Level indicator
Powder detergent box
for delayed washing/
softener box
Washing wings
Adjustable leg
Accessories
Height adjustment
plate
Inlet hose
Drain hose
1 Each for cold and
2 Pieces
hot water
7
Installation
How to install the drain hose
Holder
Holes for the Holder
Within 50mm
Push
Drain Hose
Hose
Holes
Guide
For Holder
0.9~
1m
1Fit
the machine end of the drain hose to the outlet of the drain pump and
Fit the
plastic
holder into either holes for the hold-
23
at the rear of the machine. The holder is
er
ble to fit at either direction
according
the
that the holder
standpipe.
firmly the drain
Make
sure
possi-
tighten
the
clamp.
Put the other end of the drain hose
pipe
or
over
the stand-
wash tub.
to location of
keeps
hose
so
that the drain hose
should not fall down
as
shown in the
fig.
NOTE:
To
prevent syphoning, the drain hose should
The
discharge height
should be
not extend more than 50 mm from the end of the hose
approximately
guide.
0.9~1mfrom the floor.
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL FLOW of
any water that may leak out the machine malfunction.
It is therefore the OWNER'S RESPONSIBILITY to make
drain hole
(or slope)
that will
prevent any possibility of
sure
water
Do not install the washer where it is
CAUTION
8
this machine is installed in
damage
to floor
coverings
an area
or
with
a
property.
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point
Plug the power cord of this washer into
that is switched & earthed.
Connectiong
inlet hose
The inlet hose is connected to tabs with 3/4" thread.
Ensure that rubber seals
12
Connect the cold inlet
hose
end
the blue
having
blue markings.
or
fitted.
are
Attach the
hose to
screw
it
a
straight
cold water
tightly
so
Straight
end of the cold
End
Rubber Seal
tap and then
that water will not
leak.
Water
Hose
Supply
Attach the elbow end of the cold
hose to the cold valve inlet with the
blue strainer and then
so
3
Connect the hot inlet
hose
end
having the red
or red markings.
screw
it
tightly
that water will not leak.
Attach the
hose to
screw
a
it
straight
so
Rubber Seal
Strainer
Inlet
Valve
Straight
end of the hot
hot water
tightly
Elbow End
End
Rubber Seal
tap and then
that water will not
leak.
Water
Hose
Supply
Attach the elbow end of the hot hose
to the hot valve inlet with the red
strainer and then
screw
it
tightly
Elbow End
so
that water will not leak.
Make
4 hose
sure
that the
It's the owner's
Rubber Seal
Inlet
Valve
responsibilty
to con-
nect the inlet hoses so that water
tight.
nuts are
Strainer
will not leak.
Connectiong tap adapter(Optional)
For
connecting the
optionally on some
1
inlet hose to
models.
Unscrew the
screws
Fix the
2 the tap.
taps without thread the tap adapter is provided
fixing
of the adapter.
tap adapter
to
Unscrew the 4 fixing screws of the tap
adapter so that the tap can be placed in
the middle. Push the connector vertically
upwards so that the rubber seal within
the adapter can completely adhere to the
tap.(Take care that the rubber seal will
not come off while pushing.
Place 2
wall and
fixing screws towards the
tighten it by hand or with
screwdriver to fit the size of the
diameter. Then
2
After
fixing
the tap
adapter
screws
tighten
to fit the
connect the inlet hose
Rubber Seal
Fixing
Screw
Tap Adapter
a
tap
the indicated
tap.
according
to the above instruction.
9
Installation
Improper installation of the washer may cause noise and malfunctioning.
1. The ventilating openings in the base area must not be obstructed by carpeting when the
washing machine is installed on a carpeted floor.
2. Install the washing machine on a level and firm surface, any tilt should be less than 1°.
How to
adjust level
1
Installation
Install the washer
4
on
Horizontal
area
flat and firm surface.
setting
Adjustable leg
Lift up the front of the washer and
the level indicator to the center by
adjustable legs
Horizontal
Location of
(Example)
10
or
setting
Cause
drop
To
clockwise
adjust the drop of
turning the
using the adjusting plate.
How to
adjust
When the front is lower.
Adjust the front adjusting plate
or adjust the adjustable legs.
with the
adjustable legs(2),
When the
Adjust the rear adjusting plate
or adjust the supporting plate.
with the
adjustable legs(2),
rear
is lower.
When the left is lower
Adjust the left part of
the supporting plate.
When the
Adjust the right part of
the supporting plate.
move the drop
adjusting plates.
right
is lower.
of the level indicator
by
15
mm:
Turn the
the front and
rear
the front and
adjustable legs
adjusting plates
rear
or
adjusting plates
2--3 times
or use
two
or
Checking
level
23 Checking slope
Open
the
lid, and check it the washer is correctly
by looking down from the top.
Adjust the drop of the level indicator to
Check if installation surface is tilted.
leveled
(Try to shake
ly installed.)
the red circle.
5 Confirming level
the washer and check if the washer is firm-
Distance between drain hose and
the wall
More than 10cm
More than 2cm
More than 2cm
Place the washer to
Distance between drain hose and the wall should be
level
than 10cm, and the distance between the other
the wall should be more than 2 cm.
as
in the
firm the
level.)
original position and confirm the
figure. (Try to shake the washer and con-
more
part and
Check the location of the level in the front of washer.
How to
Use the
use
the
adjusting plates
adjusting plates
to level the washer when the
adjustable legs
cannot cover the gap.
11
Function of Each Button
Changing various functions is possible only in PAUSE state.
Selection button does not work when the washer is in operation
(Except
for water
level,
water
temp.).
Preparation before wash
Detergent deposit display
?
Upon loading laundry,
it displays the correct
amount of detergent to
be added according to
Wash process display
?
Indicates the current
washing
?
Next
status.
step is lit,
current
step blinks and finished
step is turned off.
the amount of laun-
dry(based on concendetergent).
trated
Check if
laundry
is washable in
Be
sure
to remove
keys, pins
laundry.
water.
as
things
such
and coins from the
DETERGENT
EX
WARM
?LMS
HOT COLD
WATER
TEMP.
WATER
LEVEL
Wash
oily or dyed laundry
arately.
sep-
Brush off dust and soil from
clothes.
How to select temp.
?
Used to select proper watemperature of wash-
ter
ing water, [COLD
WARM(HOT+COLD)
HOT] mode repeats.
?
Use it to select hot
water.
(When
or
Child Lock
cold
?
hot water
only is selected, hot water
is suppled for washing
and cold water
plied
?
Wash
fluffy laundry by turning
it inside out.
12
Wash delicate
ping
them in
a
clothes, wrap-
nylon
net.
for
are
sup-
rinsing)
In GHUTRA program,
cold water is selected
automatically. (Hot water may damage the
fabric)
Used to lock
or
unlock the
control buttons to
prevent
all the
?
setting from being
changed by a child.
For locking, push both
buttons simultaneously
and for unlocking, push
them
ing
one more
process.
in wash-
How to select
?
washing program
a
Use it to select
washing
?
pro-
?
grams.
?
Power switch
Display
By pressing the button, it cycles
[NORMAL HEAVY SPEEDY
GHUTRA].
Used to indicate the time left of all processes or reservation.
In case of abnormal operation, the following indications are
?
Abnormal water
Abnormal
Abnormal
Abnormal
Abnormal
HOUR
and turn off.
on
'
displayed.
Abnormal
Use it turn
By pressing the button [turn
on turn off] are repeated.
Electric power automatically
supply : IE lamp blinks.
drainage : OE lamp blinks.
spin : UE lamp blinks.
water level sensing : PE lamp blinks.
lid open : DE lamp blinks.
over flooding sensing :
OF lamp blinks.
?
turns off 10 seconds after the
washing cycle
finishes with
"boo-" sound.
MINUTE
DELAY / TIME LEFT
GENTLE
SOAK
60
1
START
3
AUTO OFF
18
PAUSE
15
57
10
5
(MIN)
How to
DELAY
START
wash conditions
?Wash:
(MIN)
12345
adjust
Use it to change washing time.
By pressing the button[18min
(TIMES)
5min
SOAK 10min
SOAK 18min
OFF
SOAK
SOAK 15min
5min
10min
15min]
How to
How to
?
the water level
adjust
By pressing the button, it cycles
[LARGE LARGE EX-LARGE
?
EX-LARGE
SMALL
?
MEDIUM
?
?
SMALL
MEDIUM
MEDIUM
LARGE
LARGE].
?
At NORMAL, HEAVY or SOAK
program, water level is automati-
cally based
laundry.
on
Water level
can
adjusted ever
operation.
dirt
more
remove
old
or
hardened
can-
effectively.
Use this function for
Soak time is about 60 minutes.
?
Use it to set the
not
delayed washing.
delay time.
?Bypressingthebutton,itcycles[3 4 5
... 11 12 14 16 ... 46 48 3]
hours. (up to 48 hours can be delayed)
To cancel delay time, turn the power switch off.
?
Start and temporary pause
?
?
?
be
SOAK is used to
delayed washing
?
the amount of
when the washer is in
use
Use it to start
Pressing the
or pause temporarily.
button repeats start and
pause.
After 10 minutes in
power will
a
temporary
temporary pause state, the
automatically turn
off.
?
change
Rinse
in GHUTRA
(You
program.)
:
Use it to
change the frequency of rinse.
By pressing the button.
[rinse1 rinse2 rinse3 rinse4
rinse 5
OFF
rinse 1] are repeated.
When you select rinse only, the operation
starts with water supply.
?Spin:
Use it to change the spinning time.
By pressing the button [5 min 7 min
OFF 1min 3min 5min].
13
NORMAL Wash
Use this program for
washing
Program
normal wash load.
DETERGENT
EX
WARM
HOT COLD
?L?
GENTLE
M
1
?S
STA
357
WATER
TEMP.
WATER
LEVEL
PAU
(MIN)
123
In
NORMAL,
The washer
senses
HEAVY and SOAK programs.......
the amount and kinds of
laundry
and sets the most
appropriate
water
current, wash
time, number of rinses and spin time by itself.
While
sensing
the most
appropriate
water
level, each
If either the inner-tub contains water
become
Bulky
higher. Manually adjust
and
light laundry
may
or
water level
the
laundry
is wet before
proper water level before
cause a
blinks in turn.
lamp
loading, water levels may
operating the washer in this case.
water level lower than usual. In this case,
manually adjust
the water level.
For
laundry
Water
that may
easily
be
discolored, do
supply may be resumed about
adjustment function.
not use
2 minutes after
[SOAK] washing.
starting
the wash. It is
an
automatic
water level
When
on
14
the
using neutral detergent or liquid detergent, deposit
[instruction for detergent].
proper amount of
detergent
based
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
5
START
(MIN)
45
(TIMES)
2
1
1
Press the
2
Deposit laundry
39
and
button.
push [START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
12
6
[POWER SWITCH]
3
Electric power
"boo--" sound.
automatically
turns off 10 seconds after the
If the lid is not
closed, the machine
cannot start
washing
washing cycle
and it
to
finishes with
displays "DE"
with
alarm sound.
15
HEAVY Wash
Use this program for
Program
washing heavily
soiled durable garments such
as
overalls, jeans
etc.
DETERGENT
EX
WARM
HOT COLD
?L?
GENTLE
M
1
?S
STA
WATER
TEMP.
WATER
LEVEL
357
PAU
(MIN)
123
All conditions such
microcomputer.
16
as
water
level, wash time and spin time
are
automatically
selected
by
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
5
START
(M N)
45
(TIMES)
42
1
1
Press the
2
Select
3
Deposit laundry.
4
Press
59
12
63
[POWER SWITCH]
button.
[HEAVY] program by pressing the program button.
[STAR/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with
alarm sound.
17
SPEEDY Wash
Use this program for
Program
washing slightly
soiled
laundry.
DETERGENT
EX
WARM
HOT COLD
?L?
GENTLE
M
1
?S
STA
WATER
TEMP.
WATER
LEVEL
357
PAU
(MIN)
123
This program is economical because of its short
Adjust water quantity according
Preset water level is medium.
18
to the amount of
washing
time.
laundry.(less
then
3.0kg)
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
5
START
(M N)
45
(TIMES)
42
1
1
Press the
2
Select
3
Deposit laundry.
4
Press
59
button.
[SPEEDY] program by pressing
[START/PAUSE]
the program button.
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
12
6
[POWER SWITCH]
3
closed, the machine
cannot start
washing
and it
displays "DE"
to
with alarm
sound.
19
GHUTRA Wash
Use this program for
Program
washing ghutra, shumack,
woolens.
DETERGENT
EX
WARM
?L?
HOT COLD
GENTLE
M
1
?S
STA
WATER
TEMP.
WATER
LEVEL
357
PAU
(MIN)
123
How to
Spread
dry
wool and Ghutra clothes
wool and Ghutra clothes
surface.
on a
shady,
flat
In case of using a clothes hanger, wrap the upper
portion of the hanger with a towel to maintain the
shape of the neck or shoulder section.
Weak wrinkles after
drying
can
be smoothed out
by ironing.
CAUTION
When
setting the water level manually, do not select MEDIUM or SMALL water levels. Laundry
may get damaged.
Only cold water is set(Hot water may damage laundry).
It is recommended the use of liquid detergents for woolens or home dry cleaning that are low
sudsing and dissolve readily or in case of powdered detergent it should be dissolved in water
before being put for best washing results.
Wash less than 2.0kg of laundry at a time. For Ghutra, wash less than 1.0kg of laundry at a time.
Do not wash altogether with white clothes, bright-colored clothes or dark-colored clothes which
can be easily discolored.
It is recommended washing Ghutra only. Ghutra can discolor the white or colored clothes during
the washing.
Since spin is 'weak' for Ghutra program, water may drop even after spinning.
20
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
3
START
(M N)
45
(TIMES)
32
1
1
Press the
2
Select
3
Deposit laundry
49
6
laundry
automatically
with
If the lid is not
3
set
[MEDIUM].
and press the
fragile buttons, etc.,
Deposit detergent
12
button.
[GHUTRA] program.
Water level is
For
[POWER SWITCH]
[START/PAUSE]
button.
turn them inside out.
and close the lid.
closed, the machine
cannot start
washing
and it
displays "DE"
with alarm
sound.
21
DELAY START
This
Washing Program
conveniently for the every washing type.(except for GHUTRA program.)
to cancel delay start for delayed washing, switch the power off and start again.
be used
can
When you want
DETERGENT
EX
WARM
HOT COLD
?L?
GENTLE
M
1
?S
STA
357
WATER
TEMP.
WATER
LEVEL
PAU
(MIN)
123
How to set the
Example
:
It's 7
set the time as in the
When you
12
14
If
a.m. now.
push
figure
HOUR
48
For
detergent
delay time changes [3
3] repeatedly.
4
14hours:7a.m.
5...
For
powder detergent
put
again.
~9p.m.
detergent into the detergent box
into the exclusive
the
MIN
DELAY / TIME LEFT
below.
the button the
16...
Pull the box and
Time
like your wash to finish at 9 p.m.
you'd
How to put the
Put the
Delay
detergent
detergent
box.
then close the box
Put the
detergent
liquid detergent
after
diluting
it with the water at
the rate of 1:1.
2
Put the
bleaching
agent here
3
1
Dry the moisture in and out of the box before inserting
detergent (the detergent can become hard).
the
CAUTION
Make
sure
to
deposit detergent
in the
powder detergent
box.
If you leave detergent with the laundry for a long time, the
When the lid is opened, delayed washing cannot proceed.
In
of power
failure,
from the
may get
partially
discolored.
beginning.
supply conditions, washing may be unable to be completed by the preset time.
Remove any water from the powder detergent box before depositing detergent.
Moisture may harden the detergent.
After setting delay time, you can change the program, wash time, number of rinses, spin time,
case
According
water
22
set
again
laundry
to water
temperature and
water level.
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
5
START
(M N)
45
(TIMES)
42
1
1
Press the
2
Select
3
Set the Time.
4
Deposit laundry
and press the
Deposit detergent
in the
59
12
63
a
[POWER SWITCH]
button.
program.
Select program
except for [GHUTRA] program.
Press the DELAY START button to set the time when the
Pull the
[START/PAUSE]
powder detergent
box forward and
powder detergent
according to instruction of detergent
If the lid is not
delayed washing
deposit
manufacturer.
closed, the machine
completed.
button.
box and must close the lid.
proper amount of
Then, push
cannot start
is
washing
detergent displayed
or
back the box.
and it
displays "DE"
with
alarm sound.
How to wash when you go out
When you cannot take the laundry out
select wash and rinse
only (in
immediately
after
this case, do not select
washing is completed, you'd
spin to prevent wrinkle).
better
23
SOAK Wash
Use this program for
Program
washing heavily
soiled
laundry
after
soaking.
DETERGENT
EX
WARM
HOT COLD
?L?
GENTLE
M
1
?S
STA
WATER
TEMP.
WATER
LEVEL
357
PAU
(MIN)
123
CAUTION
If either the inner-tub contains water
or the laundry is wet, water level may be different from the inilevel.(It is not malfunction. It is the proper water setting for laundry.)
Bulky and light laundry may cause a water level lower than usual. In this case, manually adjust the
tial set
water level.
For
24
laundry
that may
easily
be
discolored, do
not use
[SOAK] washing.
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
5
START
(MIN)
45
(TIMES)
432
1
1
Press the
2
Select
3
Press the
Ghutra
Soak
a
[POWER SWITCH]
program.
washing
is not available for
[WASH]
washing
18M
59
12
63
soaking washing.
button until soak and wash blink.
time order
5M
10M
Select rinse times and
4
button.
15M
spin
Deposit laundry
18M
5M
10M
15M
time.
and press
[START/PAUSE]
button.
Deposit detergent as indicated on the display or according
instruction of detergent manufacturer and close the lid.
If the lid is not
closed, the machine
cannot start
washing
and it
displays "DE"
to
with alarm
sound.
25
Selectable
Use it to select the desired
or
to
repeat
one
Methods for Water Reuse and Other
Washing
cycle among washing, rinse
washing is completed.
and
spin,
of them after
DETERGENT
EX
WARM
?L?
HOT COLD
GENTLE
M
1
?S
STA
357
WATER
TEMP.
WATER
LEVEL
PAU
(MIN)
123
Water Reuse
1
Press the
2
WASH
[POWER SWITCH]
button.
RINSE &
Only
SPIN
DRAIN
Only
START
Use this
?
Several wash loads
one
?
cycle to
water fill
reuse
suds
can
using this
PAUSE
(washed water)
be washed with
program.
Push the wash button to select
?
wash time.
?
In this
case
Adjust water
Push the rinse & the
select rinse times &
selected wash time is
lit up.
?
level for
laundry.
"Large"
In this
time
?
&
Push the
?
?
case
are
selected rinse time &
spin
for
laundry
"Large"
Push the Start/Pause button with the
lid open.
343
start/pause
close the lid.
button.
When
washing
finishs buzzer
sound for 10
secs
and then elec-
tric power is
automatically off.
Push the power
switch to turn off
after drain finishes.
?
Buzzert sounds when drain fininshs in the state that the lid is
open.
For the next wash load take out the
26
laundry
button.
amount.
Push the
?
spin
lit up.
Adjust water level
Preset water level is
detergent
spin button to
spin time respec-
tively.
?
Preset water level is
Put
START
PAUSE
START
PAUSE
?
Only
and
repeat the above steps.
HOUR
MINUTE
DELAY / TIME LEFT
SOAK
60
ART
AUTO OFF
18
USE
15
10
DELAY
START
5
(MIN)
45
(TIMES)
1
2
4
Other Selectable
1
Press the
2
[POWER SWITCH]
Wash & Rinse
Use it for reusing
rinsed water or
Rinse
Only
minimising
button.
Only
Wash &
Spin Only
START
PAUSE
Spin Only
START
PAUSE
START
START
PAUSE
PAUSE
creases.
?
Press the WASH button to
?
select the time.
?
Press the RINSE button to
?
select the number of rinses.
?
?
Press the RINSE button to
select the number of rinses.
Adjust the water level
according to the amount of
laundry.
If the water level is not
?
Adjust the water level
according to the amount
laundry.
?
Press the SPIN button to
?
select the time.
Press the WASH and
SPIN button to select
wash and
of
?
If the water level is not
?
spin time.
Adjust water level for laundry.
Put laundry and detergent.
selected, it is automatically
set to
[LARGE].
selected, it is automatically
set to
[LARGE].
Close the lid
34
Press the
button
Ifthelidisnotcom-
pletely closed, the
washer generates the
alarm sound.
[START/ PAUSE]
Electric power turns off
automatically 10 seconds
START
after the alarm
PAUSE
when
sounds,
washing completely
finishes.
27
Water Level and Amount of
WATER
LEVEL
EX
AMOUNT OF DETERGENT
AMOUNT
OF WATER
AMOUNT
OF LAUNDRY
8.0kg
5.0kg
3.0kg
About
67g
About
57g
About
53g
Less than
46L
S
76g
Less than
53L
?
About
Less than
4.0kg
2.0kg
About
46g
About
34g
Less than
34L
1.0kg
About
61g
About
51g
About
45g
About
38g
About
35g
About
31g
About
23g
91g
Less than
57L
M
About
6.5kg
67L
?
CONCENTRATED
Less than
76L
L
REGULAR
More than
91L
?
Detergent
Concentrated
detergent: 20g per 30 liters of water.
Regular synthetic detergent: 30g per 30 liters of water.
When sensing water levels automatically, the amount of water
even
For
can
differ
according
to the amount of
laundry
at the same water level.
synthetic detergent,
use one
that
generates less bubbles. This type of detergent is specially designed
for washes.
In
using liquid detergent, dissolve it with water(detergent: water=1:1)
deposit hole.
detail usage, refer to the detergent manufacturer's instruction.
case
of
and
deposit
it
from
laundry
may remain
through
the
bleach
For
CAUTION
If you use laundry soap(neutral resin) for a long time, dirt
the inner-tub wall and cling to laundry during washing.
Using
28
excessive amount of
detergent
separated
may reduce the rinse effect and
pollute
on
the environment.
How to
How to
In the
case
Put the
of
the Bleach and the Softener
use
the bleach agent
use
using
the
bleach, it is necessary
liquid bleaching agent
with into the
For detail usage, refer to the bleach
to use the
washing
oxygenated
bleach.
cask.
agent manufacturer's instruction.
Bleach inlet
How to
the softener agent
use
Pull and open the detergent box in the direction of arrow as indicated at picture.
Put the enough agent under the standard line as indicated at the picture.
Put the box
slowly
and
smoothly
not to make the
For detail usage, refer to the softener
Detergent
agent
agent flow
over.
manufacturer's instruction.
Softener cap
inlet
Limited line
If the softener is
it
can
flow
over
put,
over.
Softener inlet
Powder
detergent
box
CAUTION
The softener is to be inserted
Insert the softener
yourself
automatically
at the last time of rinse.
at the last time of rinse since softener can be failed to be inserted auto-
matically when
the water pressure is weak (less than 0.5kgf/cm2).
Do not leave the washing machine with the softener in it more than 2
softener
Do not
by
days. (It could fail to insert
solidating softener.)
clothes. (The clothes can be damaged of discol-
itself when left with softener because of the
put the bleach and softener directly
to the
of
ored.)
29
Basic of
Each Button
Selecting
In addition to full-automatic
washer is in
Water
Even when
as
desired. When the
selection
supply
By pressing
Only
washing, the user can select other functions
operation, pause the washer before making changes.
the
HOT
COLD.
button, it cycles COLD
WARM(COL & HOT)
HOT
or
WARM
is
water
is
COLD
selected,
only
supplied
only during the RINSE cycle.
cold water is set in the GHUTRA
washing.
Water LEVEL selection
Water level is set
automatically
button to
the water level.
change
after
sensing
the amount of
laundry
is
high
or
low, press the WATER LEVEL
Wash selection
18
10
-
5
18 min.
Heavily
15 min.
Normal clothes, cotton, yam,
5 min.
stained clothes, thick clothes
synthetic fabric, normally-stained clothes,
Soft clothes, delicate clothes,
Actual wash time may differ according to water level.
For GHUTRA program, washing wings revolve very slowly(to
thin clothes
clothes
lightly-stained
prevent shrinkage and damage).
Rinse selection
Rinse 4, 5
Heavily
Rinse 2, 3
Normal clothes, cotton, yam,
Rinse 1
Spin
stained clothes
Lightly-stained
synthetic fabric, normally-stained clothes,
thin clothes
clothes
selection
7min.
Thick clothes
5min.
Normal clothes,
3min.
Soft clothes
1min. at low revolution
For GHUTRA program, the tub
light
very short time
to
Clothes to be ironed, delicate clothes
speed
slowly and spins for a
(to prevent damage
clothes).
turns very
clothes, thin clothes
Child Lock Selection
To
guard against
unwanted alteration of
cycle settings during operation
the child lock may be utilised.
HOW TO LOCK
1
Press the POWER
2
button
Press the START/PAUSE
key
after all
ditions
are
washing conset according
to the manual.
Preset all
3
Press both the WATER TEMP.
key and the
key simultaneously while
wash is proceeding, then all the keys are
locked until completing the wash program
or unlocking them.
WATER LEVEL
washing
WATER
conditions.
TEMP.
AUTO OFF
WATER
VEL
CJ
START
PAUSE
"CJ"
& the
shown
on
HOW TO UNLOCK
If you want to unlock
30
during
wash press both the water
temp key and the
remaining time are altematively
diplay while they are locked.
the
water level
key simultaneously again
the Washer
Maintaining
supply is bad, check substances
is clogged with dirt, water cannot flow
sand in the filter.
When the water
like stone
If the filter
into the washer. Clean the filter
Cleaning
Before
cleaning
or
regularly.
the filter in the inlet valve
the filter in the inlet valve,
completely
remove
the water
remaining
in the water hose.
Turn off the faucet and press
the power switch.
Disconnect water
hose, and
the inlet valve
hand
Select cold & hot water and
Remove dirt with
13
by
a
tooth
remove
filter from
with tools.
or
brush,
etc.
press START/PAUSE
button. Let the washer
operate for
2Switch
5 seconds.
off the washer and
disconnect the power cord.
Then insert it back into the water inlet.
Cleaning
the lint filter
Press and then
pull
forward
Turn inside out and wash it to
123
the lint filter from the
tub to the
arrow
Unfasten 2
remove
dirt.
Insert it back into
worn
out, etc., contact
the pump
screws
of the back
a
LG Service Center for
casing
new one.
(when drainge is bad)
turn the cap to the arrow
123
direction and unfasten it.
cover.
Reassemble the cap to the
direction and fasten it.
arrow
(Bottom view)
(Bottom view)
CAUTION
:
place
("Click").
direction.
When the lint filter is
Cleaning
washing
Check it
over
if water leaks after
reassembling.(Rubber ring
is in the
cap)
31
the Washer
Maintaining
To prevent freeze in winter
Close faucet and
remove
the
Press the SPIN button and let it
123
water hose. Direct the hose
spin
toward the bottom and
from the tub and drain hose.
completely
for 1 min. to
remove
Unplug
the power cord.
water
water from the hose.
remove
When frozen
Pour 50°C of hot water
on
the
Pour 50°C of hot water inside
Submerge
the tub and leave it for 10 min.
in 50°C of hot water
123
faucet and
remove
the water
hose.
Connect the water hose to
Connect the water hose
the washer and then start
to the faucet and
the washer. Pour 50°C of
check if water
hot water into the water
is
45
draining.
hose.
CAUTION
Stainless steel inner tub won't be rusted.
rust may cling to it in the following causes:
product(like hairpin,etc,) that can be rusted is left inside the
However, external
Metal
long
time.
Water with
Water
or
a
lot of iron substance is used for
chlorine
a
long
time.
type bleach is left inside the tub for
a
long
time.
If rust is found, soak sponge or soft cloth with cleaner
(neutral cleaner) and wipe the rust.(Never use metal sponge)
32
tub for
a
the
separated
hose
Troubleshooting
If
a
Guide
symbol appears in the display window, check the following before asking for service.
for the service center or agent in the case of failure or damage except for the following.
abnormal
Request
SYMPTOM
ITEM TO BE CHECKED
Abnormal faucet
Is the faucet
Is the faucet frozen?
closed?
Is water
supply
discontinued?
Is the water preslowered or
cold water hose is connected to
the filter
the cold
sure
clogged?
Is hot water selected when
cold
Abnormal
only a
valve?(In this case,
water.)
select
drainage
Abnormal
Check if electric
Check that the drain
power
has gone off.
hose is not twisted
kinked?
Check whether the
hung properly?
drain pump is locked
by foreign objects.
spin
Is the
Opened
or
Is the drain hose
laundry gathered
to one side?
Is the washer tilted?
lid
(At this time, buzzer sounds
without lamp indication)
Is the lid closed? If the lid is open, alarm
generated and rinse and spin cannot
is
be
proceeded.
Is the lid closed after setting delayed
washing? If the lid is opened, delayed
washing cannot be proceeded.
33
Troubleshooting
Guide
SYMPTOM
Abnormal
ITEM TO BE CHECKED
sensor
Abnormal power
Ask for service center
Abnormal overflood
Abnormal Ball
sensor
No power
AUTO OFF
Is the power switch
Is the power plug
firmly connected?
pressed?
Is power supply correct?
Is the short-circuit breaker
No
closed?
operation
START
PAUSE
Is the lid closed and the
Is the tub filled with
START/PAUSE button
required
is
Is the faucet closed?
amount of water?
pressed?
Excessive vibration and
noise
during spin
Is the washer installed
Water
supply and rinse after
pausing it during spining.
34
on
firm and level surface?
It is
normal, the washer is automatically correcting the laundry gathered
No
special
action is needed.
to one side.
Specifications
1029mm
885mm
688mm
632mm
Water pressure
Revolution
:
speed
30 800kPa
-
of the
(0.3kgf/cm2 8kgf/cm2)
-
wings : 110~130rpm
Weight : 47kg
Dimension
:
632mm(W)
×
Standard amount of water
688mm(D)
:
specifications
1029mm(H)
91L
Standard amount of water used
The appearance and
×
:
260L
may be varied without notice to raise the units
quality.
Serial Number
How to read Serial Number.
:
There is attached
Example)
a
Serial Number label
on
back side of this
product.
805KW00001
Serial No.
PRODUCT CODE
MANUFATURED MONTH
AMNUFATURED
YEAR(LAST DIGITAL)
35
Download PDF