LG | WT-R1503AEP5 | LG WT-R1503AEP5 Owner’s Manual

3828DD3002L
2005.5.10
5:15
페이지100
PM 001
HP
LaserJet
5000
Series
LD-2034WH
LD-2034SH
LD-2034MH
LD-2034WHB
LD-2034SHB
LD-2034MHB
600mm
600mm
598mm
580mm
DISHWASHER
OWNER'S MANUAL
850mm
MODEL : LD-2034WH / LD-2034SH / LD-2034MH
LD-2034WHB / LD-2034SHB / LD-2034MHB
LD-2034WHU / LD-2034SHU / LD-2034MHU
817mm
Please read this manual carefully before operating your
dishwasher. Retain it for future reference.
LD-2034WHU
LD-2034SHU
LD-2034MHU
598mm
580mm
817mm
P/No.: 3828DD3002L
Capacity
12 Place settings
Weight
See rating label
Power Supply
See rating label
Power Consumption
See rating label
Water Feed Pressure
50 ~ 800 kPa
3828DD3002L
2005.5.10
5:15
페이지2
PM
001
HP
LaserJet
5000
Series
CONTENTS
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING - When using your dishwasher, follow basic precautions,
including the following:
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTION
5
PARTS NAME
9
• Please read this manual carefully before
using the dishwasher for the first time.
• This manual contains very important
notes regarding the installation, use and
maintenance of your dishwasher.
• The manufacturer can not be
responsible for problems caused by
ignoring these safety and caution
instructions.
• This dishwasher is designed for normal
household use.
• Do not use the dishwasher for industrial
and commercial use, or other purpose.
• The appliance is not intended for use
by young children or infirm persons
without supervision.
During use
• Only suitable household utensils should
be placed in the dishwasher.
(Please avoid utensils; that are nonheat-resistant, metal decorated, etc.)
• Do not use any kinds of solvent in your
dishwasher. They may cause an
explosion or fire.
• Do not spray water on the appliance.
It may cause the failure of electric parts
or electric shock.
• Do not push down or sit on the inner
door when the door opened. It may
cause the deformation or failure of your
dishwasher.
• Do not use the detergent for hand
washing.
The detergent for dishwasher should be
used for normal operation.
• This appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its
mains.
• Do not insert anything such as coin into
the vapor vent. It may cause the failure
of mechanical parts and noise.
• Do not expose skin to vapor vent.
During operation, as hot steam may
scald.
• Dishwasher detergents are strongly
alkaline. They can be extremely
dangerous if swallowed. Avoid contact
with skin and eyes and keep children
away from the dishwasher when the
door is open.
Check that the detergent receptacle is
empty after completion of the wash
cycle.
During installation
FUNCTION OF CONTROL BUTTON
10
HOW TO USE AND OPERATE
11
WASH OPTIONS
17
PROGRAMS
18
CHECK AND CARE
19
TROUBLE SHOOTING GUIDE
20
SPECIFICATIONS
• Electrical connection must be in
accordance with the rating label.
• Electrical safety is only guaranteed
when the earth system of your house is
in accordance with the related local
regulations.(Do not use an extension
cable or cord.)
• If the hot water exceeds 65ºC, adjust
the water heater setting. If the hot water
temperature can not be maintained
below 65ºC, the dishwasher must be
connected to cold water.
• If power supply cord is damaged, it
must only be replaced by the
manufacturer or its service agent or a
similar qualified person in order to
avoid a hazard.
• This appliance must be positioned so
that the plug is accessible.
• The appliance is to be connected to the
water mains using new hose-sets and
that old hose-sets should not be reused.
3
3828DD3002L
2005.5.10
5:15
페이지4
PM
001
HP
LaserJet
5000
Series
SAFETY AND CAUTION
Child Safety
• Controls may be locked using “Child Lock” mode to prevent from starting dishwasher
accidentally.
• Keep children away from detergents and rinse-aids.
• Do not allow children to operate the dishwasher.
• Young children should be supervised to ensure that they do not play with the appliance.
CAUTION concerning the Power Cord
• Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet
circuit which powers only that appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be certain.
• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric shock or fire. Periodically examine the cord
of your appliance, and if its appearance indicates damage or deterioration, unplug it,
discontinue use of the appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
INSTALLATION INSTRUCTION
Step 2 :
PREPARE ELECTRICAL WIRING
Step 1 :
PREPARE CUPBOARD OPENING
1 This dishwasher is designed to fit to the
size shown as below.
CAUTION
For personal safety, remove house fuse or
open circuit breaker before installation. Do not
use an extension cord or adapter plug with
this appliance. Electrical and grounding
connections must comply with the national
electrical code/provincial and municipal code
and/or other local codes.
2 Select a location as close to sink as
possible for easy connections to water and
drain lines.
3 The dishwasher should not be installed
more than 3 meters from sink for proper
drainage.
1 This appliance must be supplied with
correct rating voltage and hertz as shown
on instruction manual, and connected to
an individual, properly grounded branch
circuit, protected by minimum 15 amp
circuit breaker or time delay fuse.
Wiring must be 2 wires with ground.
4 If dishwasher is to be installed in a corner,
a minimum 5cm of space is required
between the washer and an adjacent
cabinet or a wall.
2 The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher side.(See page 7 Fig.A)
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in accordance
with all local codes and ordinances.
WARNING - Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the appliance is
properly grounded. Do not modify the plug provided with the
appliance; if it will not fit the outlet have a proper outlet installed by
a qualified electrician.
4
3 The power plug must be correctly
earthed, if in doubt, have it checked by a
qualified Electrician. No other appliance
should be connected to the same plug
outlet by a double adapter or similar
plug.
Unit:mm
If bare chipboard is adjacent to or above the
dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling due to steam.
5
3828DD3002L
2005.5.10
5:15
페이지6
PM
001
HP
LaserJet
5000
Series
INSTALLATION INSTRUCTION
INSTALLATION INSTRUCTION
Step 3 :
PREPARE DISHWASHER FOR
INSTALLATION
Step 4 :
INSTALL THE DISHWASHER IN
CUPBOARD
1 Lay the dishwasher on its back.
1 Before sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
2 Adjust the legs to the needed height of
cabinet as shown in below figure.
2 Slide the dishwasher into the cabinet
opening carefully. Make sure that the
drain hose inside the cabinet is not
kinked or stretched.
CAUTION
If the height of cupboard is below 850mm, you
should remove the top table by unscrewing
the 2 screws. (Two of rear)
Step 5 :
DRAIN LINE CONNECTION
■ When the drain hose is connected to a
separate stand pipe, it is essential that an
air tight connection is made.
Refer to Fig.B
1 If the end of drain hose does not fit to
the drain line, use a piece of rubber
connector(not supplied) that must be
resistant to heat and detergent and may
be obtained from a plumbing shop.
2 There are 2 typical connections as
shown in Figure A, B.
The “S” trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
To prevent siphoning, one of the following
instruction methods must be followed:
■ When the drain hose is connected to a
sink “s” trap or waste disposal unit, the
hose must be looped up to the underside
of the bench top and secured.
Fig. B : Drainage connection - stand pipe.
Drain Hose Extension
Extend Drain Hose as shown below.
Fig. A
CAUTION
When you connect or extend Drain Hose,
make sure that drain hose is not kinked.
(Bends should have 40 mm radius.)
6
7
3828DD3002L
2005.5.10
5:15
페이지8
PM
001
HP
LaserJet
5000
Series
INSTALLATION INSTRUCTION
PARTS NAME
Step 8 :
HOW TO LEVEL THE PRODUCT
Step 6 :
WATER SUPPLY CONNECTION
1 Connect the water supply hose to the
valve behind dishwasher and the water
tap as shown in figure.
This dishwasher may be fed with either
hot or cold water. If the water can not be
maintained below 65ºC, the dishwasher
must be connected to cold water.
After installing the product, if you feel some
sticky or hear a frictional sound between the
side portion of door and tub when you open or
close the door, you have to adjust the level of
product.
Case 1. In case the door is slanted to the right
2 When connecting, the sealing tape or
sealing compound should be used to
avoid water leaks.
Make sure that the line is not kinked or
sharply bent.
Fig. C
• If the door is slanted to the right as shown in
figure C, repeat the procedure shown as
below until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there
do not remain slant, stickiness or a friction
sound.
Water tap
Water supply
hose
Valve
Case 2. In case the door is slanted to the left
11. Adjust Leg
12. Upper Rack
13. Cutlery Rack
14. Detergent & Rinse Aid Dispenser
15. Vapor Vent Cover
16. Upper Spray Arm
17. Lower Spray Arm
18. Filter ASM
19. Lower Rack
20. Salt Container Cap
1. Vapor vent
2. Control Panel
3. Door Handle
4. Front Cover
5. Lower Cover
6. Process Monitor
7. Power Switch
8. Drain Hose
9. Inlet valve ASM
10. Power Cord
Step 7 :
FINAL CHECK AND
ASSEMBLING
1 Securely hand tighten supply hose to
water supply.
Plug power supply cord into an
earthed the power plug and switch on.
Fig. D
2 Operate the dishwasher through one
cycle (Quick cycle is recommended)
to check for water leak and operating
conditions.
8
• If the door is slanted to the left as shown in
figure D, repeat the procedure shown as
below until the door is operated normally.
1) Unscrew(counter-clockwise) the right leg
of back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
• When the product is correctly leveled, there
do not remain slant, stickiness or a friction
sound.
Funnel
Inlet Hose
※ The appearance and specifications may be varied without notice according to localities.
9
3828DD3002L
2005.5.10
5:15
페이지10
PM 001
HP
LaserJet
5000
Series
FUNCTION OF CONTROL BUTTON
REMAINING
TIME
TIME SAVE
�Indication of
remaining time
�This function is for
saving time and energy.
�Self diagnosis
and error
message display
�With each press, time
save ON and OFF is
repeated.
�When select this
function, the operating
time will be shorten.
HALF LOAD
�In case of small load, use
upper or lower rack only
to save energy.
�With each press, can
select upper or lower rack
only.
�In case you don’t select
this button, the machine
always works vario
washing, which operate
upper and lower spray arm
alternately.
HOW TO USE AND OPERATE
CHILD LOCK
�Used to lock or unlock
the control buttons to
prevent all the setting
from being changed by
children.
�For locking/unlocking,
press Half Load and
Rinse button
simultaneously.
1. Loading your Dishwasher
Be careful large items not to prevent
the detergent dispenser lid from
opening
For the best washing performance, it is important
that the dishwasher is loaded according to
instructions.
Before loading items into the dishwasher, you
must scrape off large particles in particular non
soluble items such as bones, toothpicks, pips, etc.
3. Using the Cutlery Basket
Cutlery should be mixed within each
section of the cutlery basket to prevent
nesting of similar items. Place the cutlery in
the cover with the handles down. The cover
can be hinged and clipped away from the
basket if you choose not to use them.
For the knives, place at separate rack for
knives located at upper rack.
When loading the dishwasher, observe the
following general guidelines:
■ Position crockery such that water will contact
all surfaces.
■ Deep based items should be placed at an angle
to help water run off and dry properly.
■ Items with burnt on scraps should be soaked
prior to loading in the dishwasher.
Take care when loading and unloading
sharp items.
2. Loading the Lower Rack
DELAY START
BUTTON
�If you want to
delay the start of
selected program,
press this button
before pressing
start button.
�Pressing the delay
time will increase
time by 1 hour.
�The delay start
time can be
adjusted from 1
hour to 19 hours.
PROGRAM
RINSE/SANI
�When power is
on, program is
automatically
set to normal.
�With each
press, rinse+,
rinse+ & 77。C
sani rinse,
77。C sani rinse
is repeated.
�If you want to
change the
program, press
the button and
set the program
you want to.
START/PAUSE
BUTTON
�With each press,
Start and Pause is
repeated during
operation.
�If the machine
remains in Pause
mode for 10
minutes, the
power is
automatically
turned off.
POWER SWITCH
BUTTON
�For operating, press
this button first for
power on.
�After operating, this
button automatically
switches off for safety
and energy saving.
The lower basket is best loaded with dinner
plates, soup bowls, dishes, pots, pans, lids
and even the grill tray.
Plates should be positioned upright and
facing the center of the rack.
Pots, pans and large dishes must be turned
upside down.
Take care not to obstruct the rotation
of the spray arms.
5
4
3
1
2
1
2
1
2
1
4
2
1
4
4
2
1
4
4
1
2
4
4
1
2
4
1
2
1
2
1
2
1
2
3
Soup plate
3
3
�In case of irregular
surge disturbances to
the machine, the power
may be automatically
turned off for safety.
3
4
6
4
3
3
3
1
2
3
4
5
6
7
3
4
Soup plate
Dinner plate
11
3
3
7
5
10
3
2
3828DD3002L
2005.5.10
5:15
페이지12
PM 001
HP
LaserJet
5000
Series
HOW TO USE AND OPERATE
4. Loading the Upper Rack
HOW TO USE AND OPERATE
5. Adjusting the Upper Rack
(Not on all models)
The upper rack is best loaded with more
delicate items, small plates, long cutlery,
cups, glasses and dishwasher safe plastic
items. Plates should be positioned upwards
with the plate bottom facing the front of the
rack.
Cups, glasses and bowls must be positioned
upside down.
Extra cups or cooking utensils can be laid
on the fold down cup racks which may also
provide support for long stem glasses.
Take care not to obstruct the rotation of the
spray arm under the upper rack.
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
adjusting, ensure rack is empty of
all crockery and side the rack out.
Reinsert the rack in the chosen position.
Fitting the rack back into the standard
position reduces the space between the
upper and lower rack.
After adjusting, check that the spray arm
is free to rotate.
6. Adding Detergent
Dispenser
• Detergent must be put into the detergent
chamber before starting every program
except the Pre-Wash.
Push latch to open
• Please follow the manufacturer’s
instructions printed on the manual when
determining the correct dosage.
• If your dishers are only moderately dirty,
you may be able to use less detergent than
recommended.
Place proper detergent
into this compartment
• Chambers hold 15g and 25g.
• The amount of detergent depends on the
program. Refer to the guide table.
�
Front
Non Dishwasher Safe Items
PROGRAM
AMOUNT OF DETERGENT
Intensive
25g
Normal
20g
Eco
15g
Gentle
10g
Quick
10g
Pre-Wash
No detergent
WARNING
The detergent used is a special
Dishwasher detergent and like all
household chemicals should be treated
as a poison and kept out of reach of
children. At completion of each wash
program, the detergent compartment
should be checked and any remaining
detergent removed.
• After the detergent is supplied, the
chamber lid should be closed.
The combination of high water temperatures and
dishwasher detergent may damage particular
items, therefore we do not recommend using the
dishwasher to wash the following:
• The detergent is dispensed automatically
during the operation.
• The chamber lid remains open after
operation.
■ Copper or anodized aluminum
■ Hand painted silver or gold leaf crockery
■ Wood or bone handled utensils
■ Iron or non rust proof utensils
■ Plastic items which are not dishwasher safe.
WARNING
Before adjusting, ensure rack is
empty of all crockery.
Otherwise crockery may be
damaged or you may be injured.
12
Detergent Information
Use only the detergent intended for
household dishwashers. (Ordinary handwashing detergent should not be used,
because the foam can interfere with proper
operation.)
13
3828DD3002L
2005.5.10
5:15
페이지14
PM 001
HP
LaserJet
5000
Series
HOW TO USE AND OPERATE
7. Adding Rinse Aid
Dispenser
HOW TO USE AND OPERATE
■ For Setting
8. Salt Filling
This model has a water softener to soften
hard water.
So you should read these notes carefully
for correct operation.
� For filling
To fill the Rinse Aid chamber, rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with a good quality Rinse Aid, then replace
and lock the cap.
The Rinse Aid is automatically dispensed
during the final rinse cycle.
• The dishwasher must be
switched off
• Press “Rinse” and “Power”
button simultaneously and keep
them pressed.
• A “HL” will appear in the time
display.
■ For First filling
• Check the water hardness of your area. (Your
water supplier will be able to inform you on
the hardness and hardness range of the water
in your area.)
• Set the water hardness according to the
setting method of the water softener.
• Remove Lower rack and unscrew the cap of
salt container.
• Fill the salt in the salt container before using
your dishwasher for the first time. Use a kind
of funnel for easy and clean filling. The salt
container capacity is about 1.9 kg. (Use
coarse salt or regenerating salt intended for
dishwasher.) Then fill the water.
• After filling, wipe off any spilled salt to seal
the cap properly.
• Screw the cap tightly to prevent the suds
penetration that may cause the water
softening troubles.
The dosage setting is factory set to suit
most installations. If, after washing, you
notice cloudy spots, streaks or water marks
on your glassware, it may be necessary
increase the setting. To do so, remove the
cap and rotate the indicator arrow to a
higher setting then replace the cap . If the
glasses are smeared or there is foam present
on the bottom of the glass or the bottom of
the machine. Select a lower setting.
� For refilling
Depending on the dosage setting and the
number of washes, the chamber may need
only to be topped up once per month
approximately. The rinse aid level can be
checked by two methods.
• By the indicator window on the dispenser
when the dishwasher door is fully open.
● Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid required
Rinse Aid Information
Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
• By the light on the control panel when the
dishwasher is working on.
�
• To change the setting, press the
“Delay start” button.
• Each press the display is
changed between “H5” and
“H7”.
• Adjust the level as below table.
�
• Once the hardness setting is
correctly adjusted, press the
“start/pause” button. Then the
hardness setting is saved.
When the electricity is not supplied to the
dishwasher such as electric failure / housemoving etc. resetting the water hardness.
HL
ppm
mmol/l
dH
fH
When the lamp is lighted on, it means the
rinse is almost exhausted. Then, refill the
Rinse.
14
15
Below 300
Below 3,0
Below 17
Below 30
H5
H6
H7
300~370
3,0~3,7
17-21
30-37
380~540
3,8~5,4
22-30
38-54
550~890
5,5~8,9
31-50
55-89
3828DD3002L
2005.5.10
5:15
페이지16
PM 001
HP
LaserJet
5000
Series
HOW TO USE AND OPERATE
■ For refilling
When the salt is exhausted, the salt refill lamp is lighted on automatically during operation. Then
the salt should be refilled after finished the cycle. But it is recommended the salt refill should
always be done (as mentioned previous page) before starting next operation to thin and drain away
any excess salt solution immediately.
When the lamp is lighted on, it means the
salt is almost exhausted. Then, refill the
Salt.
Note
• After filling with salt, may take a while before the indicating lamp goes out.
Do not pour detergent into the container for special salt. This would destroy the water softener.
10. Drying
■ Fold-down dividers at the lower rack can
be lowered to improve stacking of pots
and pans.
■ At the end of the program, it is
recommended to fully open the door to
assist in drying.
11. Energy Test(EN50242)
■ Appliance loaded in accordance with
standard specifications.
• Example of loaded dishwasher : p.11~12
• Capacity : 12 place settings
• Comparability course : ECO
• Rinse aid setting : 3
• Reference cleaner : 6g of detergent onto
the inside surface of the door and fill 24g
into the detergent dispenser.
• Height-adjustable Rack-U must be
inserted in the uppermost position.
16
Before selecting the wash program, press the power button. Then Normal
program will be selected with remaining time on display window. To change the
program, press the program button required.
Start / Pause Button
Child Lock
After selecting a wash program, press the Start
or Pause button to start the wash cycle.
If at any time you want to interrupt the
washing cycle, press the Start or Pause button.
Your dishwasher will then pause. Press the
Start or Pause button again to re-start
dishwasher.
To reduce the possibility of children
interrupting the dishwasher when
unattended, the child lock feature can be
selected.
■ For locking or unlocking, press “Half
Load” and “Rinse” buttons
simultaneously.
Progress Indicators
WARNING
9. Fold down dividers.
WASH OPTIONS
Sani-Rinse
Once you select a program, the progress
indicators light(Wash, Rinse, Dry). When press
the Start or Pause button to start the program,
the current stage light will blink.
When you want to rinse dishes with higher
temperature for sanitation, use this function
at any program. If you choose this function,
the water temperature goes up to 77˚C when
rinsing.
Press Rinse button until “R77˚” is lighted on.
Delay Start
This function enables the wash cycle to start
anywhere between 1 to 19 hours later.
■ Select the program that you want by using
the program button.
■ Set the delay time you want by pressing the
“Delay Start” button. The delay start time is
increased by 1 hour for each pressing.
■ Press the start button. Then the program will
be started automatically after the delayed
time shown in the display has expired.
Half Load
With each press, upper rack only(Upper
light on), lower rack only(Lower light on)
can be selected.
In case of small load washing, use upper or
lower rack only to save energy.
Rinse Plus
Normally when you select any program, the
Rinse process is done only two ( 1 normal
rinse +1 heating rinse) or three (2 normal rinse
+ 1 heating rinse) times according to selected
program. But if you want to rinse more, you
can use this function. As you select R+1 with
pressing Rinse button, the normal rinse will be
done one time more.
17
3828DD3002L
2005.5.10
5:15
페이지18
PM 001
HP
LaserJet
5000
Series
PROGRAMS
Program
CHECK AND CARE
WASH
Pre Wash
Main
Wash
℃
40℃
℃
70℃
RINSE
Rinse 1
Rinse 2
Rinse 3
Heating
Rinse
DRY
℃
70℃
Intensiv
℃
65℃
℃
65℃
℃
50℃
℃
60℃
℃
40℃
℃
55℃
℃
35℃
℃
40℃
Normal
To prevent trouble and poor operating, it is important to check and care for the
filters and spray arms at intervals.
Filters
Upper Spray Arm
• Remove the lower rack first.
• Turn the mesh filter counterclockwise off.
• Take out the mesh filter, upper STS filter
and out filter.
• Clean them if necessary.
• Replace them in the reverse order.
• Pull the upper rack forwards.
• Check that the water jet holes are not
blocked by food particles.
• When necessary to clean, remove the arm
by unscrewing the nut.
• Clean the spray arm and replace it in the
reverse order.
Eco
Gentle
Quick
Pre-Wash
Lower Spray Arm
Intensive Wash
Gentle Wash
This program is for washing delicate items
like glasses.
This program is for heavily soiled loads
including pots, pans and casserole dishes.
Quick Wash
Normal Wash
• Check that the water jet holes are not
blocked by food particles.
• When necessary to clean, remove the arm
by pulling up.
• Clean the spray arm and replace by pushing
down.
This program is for that quick wash of
lightly soiled recently used dishes and
cutlery.
This program is for normally soiled
everyday loads.
Eco Wash
This program is for light soiled everyday
loads.
18
19
3828DD3002L
2005.5.10
5:15
페이지20
PM 001
HP
LaserJet
5000
Series
TROUBLE SHOOTING GUIDE
MEMO
■ If a problem occurs in your machine, call for service.
■ Before you call for service, check the below instructions to see whether the
problem can be solved by yourself first.
Problem
Possible Causes
The lamps do not come
on when the power switch on.
• Plug is not properly inserted in the socket.
• Fuse blown or circuit breaker tripped.
• The electricity of the house was cut off.
The machine does not start.
• Door is not fully closed.
• The start button is not pressed.
Water is not pumped away.
(The display shows “ ” code.)
• The drain hose is kinked.
• The filter is clogged. (Clean the filter.)
The display shows “
(Automatically Drain Pump operated.)
• Excessive water is supplied than normal water level.
• The inlet valve is troubled.
The display shows “
“ code.
• Water is not supplied. (Water tap is not opened.)
The display shows “
“ code.
• Water leakage in Hose connections.
• Water is leaked by damages.
The display shows “
“ code.
• The circuit of Heater is troubled.
“ code.
The spray arms does not rotate
smoothly.
• The mounting of spray arms is blocked by food
particles. (Clean the holes of the spray arm.)
White deposits are left on the
dish washer after washing.
• The amount of detergent or rinse-aid set incorrectly.
• Salt is exhausted in the salt container.
• The salt container cap is not securely screwed on.
Streaks are left on glassware.
• Too little Rinse-aid dispensed.
Dry results are not satisfactory.
• Too little Rinse-aid dispensed.
Washing results are not
satisfactory.
• Incorrect amount of detergent.
• Utensils incorrectly arranged or overloaded.
• Filters are clogged.
• Water jet holes of spray arms blocked.
• Spray arms’ rotation obstructed by utensils.
• Unsuitable program selected.
20
21
3828DD3002L
2005.5.10
5:15
페이지22
PM 001
HP
LaserJet
5000
Series
MEMO
MEMO
22
23
Download PDF

advertising