LG | ARNU12GTUC2.ENWAUAE | LG ARNU05GTRC2.ENWAUAE Owner’s Manual

ENGLISH
OWNER’S MANUAL
AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
CEILING CASSETTE - 1WAY (ART TYPE)
Original instruction
www.lg.com
P/NO : MFL68501401
Ceiling Cassette - 1Way Type Indoor Unit Owner’s Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Safety Precautions.................3
Write the model and serial numbers here:
Model #
Serial #
Prior to Operation ..................6
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
Operating Instructions...........7
n Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
Maintenance and Service ....10
READ THIS MANUAL
Before you Call for Service
............................................15
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance with
the National Electric Code by qualified and authorized
personnel only.
2
Indoor Unit
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified
by the following indications.
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage to properties only.
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
n Installation
Do not use a defective or
underrated circuit breaker. Use
this appliance on a dedicated
circuit.
• There is risk of fire or electric
shock.
Install the panel and the cover
of control box securely.
For electrical work, contact the
dealer, seller, a qualified
electrician, or an Authorized
Service Center.
Always ground the product.
• Do not disassemble or repair the
product. There is risk of fire or
electric shock.
• There is risk of fire or electric
shock.
Always install a dedicated
circuit and breaker.
Use the correctly rated breaker
or fuse.
• There is risk of fire or electric
shock.
• Improper wiring or installation
may cause fire or electric shock
• There is risk of fire or electric
shock.
Do not modify or extend the
power cable.
Do not install, remove, or reinstall the unit by yourself
(customer).
Be cautious when unpacking
and installing the product.
• There is risk of fire or electric
shock.
For installation, always contact
the dealer or an Authorized
Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
• There is risk of fire, electric
shock, explosion, or injury.
Do not install the product on a
defective installation stand.
• It may cause injury, accident, or
damage to the product.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
Be sure the installation area
does not deteriorate with age.
• If the base collapses, the air
conditioner could fall with it,
causing property damage,
product failure, and personal
injury.
Owner’s Manual 3
ENGLISH
Safety Precautions
Safety Precautions
n Operation
Do not let the air conditioner
run for a long time when the
humidity is very high and a
door or a window is left open.
• Moisture may condense and wet
or damage furniture.
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not allow water to run into
electric parts.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
Take care to ensure that power
cable could not be pulled out
or damaged during operation.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
• There is risk of fire or electrical
shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Do not place a heater or other
appliances near the power
cable.
• There is risk of fire and electric
shock.
Do not use the product in a
tightly closed space for a long
time.
• Oxygen deficiency could occur.
When flammable gas leaks,
turn off the gas and open a
window for ventilation before
turn the product on.
If strange sounds, or small or
smoke comes from product.
Turn the breaker off or
disconnect the power supply
cable.
Stop operation and close the
window in storm or hurricane.
If possible, remove the product
from the window before the
hurricane arrives.
• Do not use the telephone or turn
switches on or off.
There is risk of explosion or fire
• There is risk of electric shock or
fire.
• There is risk of property damage,
failure of product, or electric
shock.
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
When the product is soaked
(flooded or submerged),
contact an Authorized Service
Center.
• There is risk of physical injury,
electric shock, or product failure.
• There is risk of fire or electric
shock.
Ventilate the product from time to time when
operating it together with a stove, etc.
Be cautious that water could
not enter the product.
• There is risk of fire, electric
shock, or product damage.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of fire or electric shock.
• There is risk of electric shock.
When the product is not be used for a long time,
disconnect the power supply plug or turn off the
breaker.
Take care to ensure that nobody could step on
or fall onto the outdoor unit.
• There is risk of product damage or failure, or
unintended operation.
4
Indoor Unit
• This could result in personal injury and product
damage.
Safety Precautions
ENGLISH
CAUTION
n Installation
Always check for gas (refrigerant) leakage
after installation or repair of product.
• Low refrigerant levels may
cause failure of product.
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
• It may cause a problem for your
neighbors.
Install the drain hose to ensure that
water is drained away properly.
• A bad connection may cause
water leakage.
Use two or more people to lift
and transport the product.
• Avoid personal injury.
n Operation
Do not expose the skin directly
to cool air for long periods of
time. (Don't sit in the draft.)
Do not use the product for special
purposes, such as preserving foods, works
of art, etc. It is a consumer air conditioner,
not a precision refrigeration system.
• This could harm to your health.
• There is risk of damage or loss of property.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
Do not touch the metal parts of the
product when removing the air
filter. They are very sharp!
Keep level even when installing
the product.
• To avoid vibration or water
leakage.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
• It may cause corrosion on the product.
Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.
Do not block the inlet or outlet
of air flow.
• It may cause product failure.
Do not step on or put anyting
on the product. (outdoor units)
• There is risk of fire, electric
shock, or damage to the plastic
parts of the product.
• There is risk of personal injury.
• There is risk of personal injury
and failure of product.
Always insert the filter securely.
Clean the filter every two weeks
or more often if necessary.
Do not insert hands or other objects
through the air inlet or outlet while
the product is operated.
Do not drink the water drained
from the product.
• There are sharp and moving parts
that could cause personal injury.
• It is not sanitary and could cause
serious health issues.
• A dirty filter reduces the efficiency of
the air conditioner and could cause
product malfunction or damage.
Use a firm stool or ladder when
cleaning or maintaining the
product.
Replace the all batteries in the remote
control with new ones of the same
type. Do not mix old and new batteries
or different types of batteries.
• Be careful and avoid personal injury.
• There is risk of fire or explosion
If the liquid from the batteries gets onto your
skin or clothes, wash it well with clean water. Do
not use the remote if the batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
OPERATING TEMPERATURE(C)
COOLING MODE
INDOOR
OUTDOOR
MAX.
MIN.
MAX.
MIN.
32C
21C
43C
21C
Do not recharge or
disassemble the batteries.
Do not dispose of batteries in a
fire.
• They may burn or explode.
If you eat the liquid from the batteries, brush
your teeth and see doctor. Do not use the remote
if the batteries have leaked.
• The chemicals in batteries could cause burns or
other health hazards.
HEATING MODE
INDOOR
OUTDOOR
MAX.
MIN.
MAX.
MIN.
27C
20C
24C
1C
Owner’s Manual 5
Prior to Operation
Prior to Operation
Preparing for operation
1. Contact an installation specialist for installation.
2. Use a dedicated circuit.
Usage
1. Being exposed to direct airflow for an extended period of time could be hazardous to your health.
Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or
other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e.g. preserving precision
devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
1. Do not touch the metal parts of the unit when removing the filter. Injuries can occur when
handling sharp metal edges.
2. Do not use water to clean inside the air conditioner. Exposure to water can destroy the insulation,
leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and breaker are turned off. The fan
rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is
accidentally triggered on while cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
6
Indoor Unit
Prior to operation
Name and function of wired remote controller(Accessory)
1. Operation indication screen
2. Set temperature button
• It will set not room temperature but outlet air temperature.
1
10
9
8
2
3
7
11
12
13
3. Fan speed button
• Fan Speed have 3 Steps.
• Middle and Low step is same
4. ON/OFF button
4
5. Opration mode selection button
5
6. Wireless remote controller receiver
• Some products don't receive the wireless signals.
6
7. Air flow button
14
8. Subfunction button
15
9. Function setting button
10. Ventilation button
11. Reservation
12. Up,down,left,right button
• To check the indoor temperature, press
button.
Please attach the inform label inside of the door.
Please choose proper language depend on your
country.
13. Room temperature button
• Displays only the room temperature of the remote
controller perception.
• There is no control of room temperature.
• In case of fresh air intake unit, displays only the
temperature around remote controller.
14. Setting/Cancel button
15. Exit button
※ Some functions may not be operated and displayed depending on the product type.
※ It will display strange value to the room temperature if wired remote controller is not connected.
Model : PQRCVSL0 (Black Color)
PQRCVSL0QW (White Color)
Owner’s Manual 7
ENGLISH
Operating Instructions
Operating Instructions
Name and function of wireless remote controller(Accessory)
1. VANE ANGLE Button
Used to set each vane angle.
2. FUNCTION SETTING Button
Used to set or clear Auto Clean, Smart Clean,
Electric heater or Individual vane angle control.
3. ON/OFF Button
Used to turn on/off the unit.
1
2
3
10
11
12
4
13
5
6
14
7
8
4. JET COOL Button
Speed cooling operates super high fan speed.
5. LEFT/RIGHT AIRFLOW Button (OPTIONAL)
Used to set the desired left/right(horizontal)
airflow direction.
6. UP/DOWN AIRFLOW Button
Used to stop or start louver movement and set
the desired up/down airflow direction.
15
16
9
7. ON TIMER Button
Used to set the time of starting operation.
8. SLEEP TIMER Button
Used to set the time of sleeping operation.
17
9. SET / CLEAR Button
Used to set/clear the timer.
Used to set the current time(if it input for
3sec.)
PQWRCQ0FDB (Cooling only)
PQWRHQ0FDB (Heat pump)
10. PLASMA Button (OPTIONAL)
Used to start or stop the plasma-purification
function.
11. ROOM TEMPERATURE SETTING Button
Used to select the room temperature.
Operation Mode
Cooling Mode
12. OPERATION MODE SELECTION Button
Used to select the operation mode.
Auto Mode or Auto Changeover
13. INDOOR FAN SPEED SELECTION Button
Used to select fan speed in four steps low,
medium, high and chaos.
Dehumidification mode
14. ROOM TEMPERATURE CHECKING Button
Used to check the room temperature.
Heating Mode
15. OFF TIMER Button
Used to set the time of stopping operation.
Fan Mode
• Cooling Model(
), Heat Pump Model(
)
16. TIMER SETTING(Up/Down)/LIGHT Button
Used to set the timer.
Used to adjust the brightness.(if it is not time
adjust mode)
17. RESET Button
Used to reset the remote controller.
CAUTION: When it dose not use the PQWRCQ0FDB/ PQWRHQ0FDB,
Some kinds of function could not operate.
8
Indoor Unit
Operating Instructions
ENGLISH
Forced Operation
Operation procedures when the remote control can't be used.
Press the tact switch (forced operation) for 2 seconds.
If you want to stop operation, press again the tact switch.
In case the power comes on again after power failure on the
forced operation mode, the operating conditions are
automatically set as follows:
During forced operation, the initial mode continues.
Forced operation7
(Tact switch)
Heat pump model
Cooling model
Operating mode
Indoor fan Speed
Setting temperature
Cooling
High
22°C
Room temperature
≥ set temperature -2°C
Room temperature
≥ set temperature -2°C
Cooling
Set available
Set available
Heating
Set available
Set available
Auto Restart Function
In case the power comes on again after a power failure, auto restarting operation is the function to operate
procedures automatically to the previous operating conditions.
Tips for Filter Sign LED (Grille Type)
1. Filter sign lamp (LED) is on.
2. If LED indicating filter sign lamp is on, clean the filter.
3. After cleaning the filter, press the timer button and ◀ button of wired remote controller at the same time for 3
seconds. Then filter sign LED is off.
Owner’s Manual 9
Maintenance and Service
Maintenance and Service(Robot + Panel Type)
CAUTION
Before performing any maintenance, turn off the main power to the system.
Panel, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
NOTICE(
Air outlet
Supply power must be disconnected
before cleaning the indoor unit.
Remote
Controller
Air inlet
TEMP7
7
Wired remote 7
controller
Clean boy
Please sweep clean boy every five years or it is required.
1. Remove right cover of front panel.
2. Push button and pull down.
Front panel
Suction motor
Clean boy
3. Open the cap, dump out dust and then
wash clean boy.
4. After drying, push up clean boy until
clicking sound.
5. Reassemble right cover.
Right cover
Handle
Button
o Never use any of the followings:
• Water hotter than 40°C.
Could cause deformation
and/or discoloration.
• Volatile substances.
Could damage the
Be
n zene
surfaces of the air
conditioner.
10
Indoor Unit
SI
N NER
SCO
U RIN 7
C LB
A R 7 ER
Maintenance and Service
CAUTION
Before performing any maintenance, turn off the main power to the system.
Panel, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with a
soft, dry cloth. Do not use bleach or abrasives.
NOTICE(
Air outlet
Supply power must be disconnected before
cleaning the indoor unit.
Remote
Controller
Air inlet
TEMP7
7
Wired remote 7
controller
Air Filter
The air filters behind the front grille should be checked and
cleaned once every 2 weeks or more often if neccessary.
Air filter
1. Remove air filters.
o Take hold of the tab and pull slightly forward
to remove the filter.
CAUTION
When the air filter is to be removed, do not
touch the metal parts of the indoor unit.
It may cause an injury.
2. Clean dirt from the air filter using a vacuum
cleaner or washing with water.
o If dirt is conspicuous, wash with a neutral
detergent in lukewarm water.
o If hot water (50°C or more) is used, it may
be deformed.
o Never use any of the followings:
• Water hotter than 40°C.
Could cause deformation and/or
discoloration.
• Volatile substances.
Could damage the
surfaces of the air
SI
N NER
conditioner.
Be
n zene
3. After washing with water, dry well in
the shade.
o Do not expose the air filter to direct
sunlight or heat from a fire when drying it.
4. Install air filter.
SCO
U RIN 7
C LB
A R 7 ER
Owner’s Manual 11
ENGLISH
Maintenance and Service(Standard + Panel Type)
Maintenance and Service
Maintenance and Service(Standard + Grille Type)
CAUTION
Before performing any maintenance, turn off the main power to the system.
Grille, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
NOTICE(
Supply power must be disconnected
before cleaning the indoor unit.
Air outlet
Remote
Controller
TEMP7
7
Air inlet
Wired remote 7
controller
Air Filter
The air filters behind the front grille should be checked and
cleaned once every 2 weeks or more often if neccessary.
1. Remove air filters.
o Take hold of the tab and pull slightly forward
to remove the filter.
CAUTION
When the air filter is to be removed, do not
touch the metal parts of the indoor unit.
It may cause an injury.
Rack
Air filter
2. Clean dirt from the air filter using a vacuum
cleaner or washing with water.
o If dirt is conspicuous, wash with a neutral
detergent in lukewarm water.
o If hot water (50°C or more) is used, it may
be deformed.
3. After washing with water, dry well in
the shade.
o Do not expose the air filter to direct
sunlight or heat from a fire when drying it.
TT chassis : 6EA Rack
TU chassis : 4EA Rack
4. Install air filter.
o Never use any of the followings:
• Water hotter than 40°C.
Could cause deformation and/or
discoloration.
• Volatile substances.
Could damage the
surfaces of the air
SI
N NER
conditioner.
Be
n zene
12
Indoor Unit
SCO
U RIN 7
C LB
A R 7 ER
Maintenance and Service
CAUTION
Before performing any maintenance, turn off the main power to the system.
Grille, Case, and Remote Control
o Turn the system off before cleaning. To clean, wipe with
a soft, dry cloth. Do not use bleach or abrasives.
NOTICE(
Supply power must be disconnected
before cleaning the indoor unit.
Air outlet
Remote
Controller
TEMP7
7
Air inlet
Wired remote 7
controller
Air Filter
The air filters behind the front grille should be checked and
cleaned once every 2 weeks or more often if neccessary.
1. Remove air filters.
o Take hold of the tab and pull slightly forward
to remove the filter.
CAUTION
When the air filter is to be removed, do not
touch the metal parts of the indoor unit.
It may cause an injury.
Rack
Plasma filter
2. Remove plasma filter.
o Unscrew 2 screws from plasma filter.
3. Clean dirt from the air filter using a vacuum
cleaner or washing with water.
o If dirt is conspicuous, wash with a neutral
detergent in lukewarm water.
o If hot water (50°C or more) is used, it may
be deformed.
4. After washing with water, dry well in
the shade.
o Do not expose the air filter to direct
sunlight or heat from a fire when drying it.
Air filter
TT chassis : 6EA Rack
TU chassis : 4EA Rack
o Never use any of the followings:
• Water hotter than 40°C.
Could cause deformation and/or
discoloration.
• Volatile substances.
Could damage the
surfaces of the air
SI
conditioner.
N NER
Be
n zene
5. Install plasma filter and air filter.
SCO
U RIN 7
C LB
A R 7 ER
Owner’s Manual 13
ENGLISH
Maintenance and Service(Plasma + Grille Type)
Maintenance and Service
When the air conditioner is not going to be used for a long time.
When it is not going to be used for
a long time.
When the air conditioner is to be used again.
Operate the air conditioner at the
following settings for 2 to 3 hours.
• Type of operation: Fan operation mode.
• This will dry out the internal mechanisms.
Turn off the breaker.
Clean the air filter and install it in the
indoor unit.
Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
CAUTION
Turn off the breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Check that the ground wire is
connected correctly. It may be connect
to the indoor unit side.
Helpful information
The air filters and your electiric bill.
If the air filters become clogged with dust, the
cooling capacity will drop, and 6% of the electricity
used to operate the air conditioner will be wasted.
Operation Tips
Do not overcool the room.
Keep blinds or curtains
closed.
Keep the room temperature
uniform.
This is not good for the health
and wastes electricity.
Do not let direct sunshine
enter the room when the air
conditioner is in operation.
Adjust the vertical and
horizontal airflow direction to
ensure a uniform temperature
in the room.
Make sure that the doors
and windows are shut tight.
Clean the air filter regularly.
Ventilate the room
occasionally.
Avoid opening doors and
windows as much as possible
to keep the cool air in the
room.
Blockages in the air filter
reduce the airflow and lower
cooling and dehumidifying
effects. Clean at least once
every two weeks.
14
Indoor Unit
Since windows are kept
closed, it is a good idea to
open them and ventilate the
room now and then.
Maintenance and Service
ENGLISH
Before you call for service...
?
Troubleshooting Tips! Save time and money!
Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.
The air conditioner
does not operate.
The room has a
peculiar odor.
It seems that
condensation is
leaking from the air
conditioner.
Air conditioner does
not operate for about
3 minutes when
restart.
• Check that this is not
a damp smell exuded
by the walls, carpet,
furniture or cloth
items in the room.
• Condensation occurs
when the airflow from
the air conditioner
cools the warm room
air.
• This is the protector
of the mechanism.
• Wait about three
minutes and
operation will begin.
Does not cool or heat
effectively.
The air conditioner
operation is noisy.
Crack sound is
heard.
• Is the air filter dirty?
See air filter cleaning
instructions.
• The room may have
been very hot when
the room air
conditioner was first
turned on. Allow time
for it to cool down.
• Has the temperature
been set incorrectly?
• Are the indoor unit's
air inlet or outlet vents
obstructed?
• For a noise that
sounds like water
flowing.
-This is the sound of
freon flowing inside
the air conditioner
unit.
• For a noise that
sounds like the
compressed air
releasing into
atmosphere.
-This is the sound of
the dehumidifying
water being
processed inside the
air conditioning unit.
• Have you made a
mistake in timer
operation?
• Has the fuse blown
or has the circuit
breaker been
tripped?
Remote control
display is faint, or no
display at all.
• This sound is generated
by the expansion/
constriction of the front
panel, etc. due to
changes of temperature.
• Are the batteries
depleted?
• Are the batteries
inserted in the
opposite (+) and (-)
directions? Filter sign lamp
(LED) is ON.
(Grill Type)
• Cleaning the filter,
press the Timer button
and ◀ button of wired
remote controller at
the same time for 3
sec.
NOTICE(
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to
excess water.
Owner’s Manual 15
16
Indoor Unit
‫اللخليجية‬
‫االمارات العربيه المتحده – دبي‬
‫ميديا سيتي – برج شاذا‬
‫الطابق ‪ – 34‬ص‪.‬ب ‪502535‬‬
‫لألردن‬
‫شركة إل جي لإللكترونيات – المشرق العربي منطقة مشروع العبدلي‪ -‬جادة رفيق الحريري‪ -‬الطابق الخامس‬
‫‪[Manufacturer] LG Electronics Inc. Changwon 2nd factory‬‬
‫‪84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA‬‬
‫‪16‬‬
‫‪MULTI V™ á«∏NGódG IóMƒdG‬‬
Download PDF