LG | AS70GPWF1 | Owner's Manual | LG AS70GPWF1 Owner’s Manual

LG AS70GPWF1 Owner’s Manual
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 1
ENGLISH
OWNER’S MANUAL
LG
AIR PURIFIER
Please read this manual carefully before operating your set and
retain it for future reference.
Model name : AS70GPWF1
MFL42657823
Rev.00_070516
www.lg.com
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 2
2
SAFETY PRECAUTIONS
ENGLISH
SAFETY PRECAUTIONS
The precautions related with the safety shown below are to prevent unexpected hazard and damage through safe and accurate operation of the product.
! WARNING
If not followed, It may cause death or major injury to the user.
! CAUTION
If not followed, it may cause injury to the user or property damage.
! WARNING
Installation
• Do not arbitrarily change or extend the power line.
- It may cause fire and electric shock.
• When the socket is damaged or loosened, do not use it.
- It may cause fire and electric shock.
• Do not arbitrarily disassemble, repair, or modify the product.
- It may cause fire and electric shock.
• Do not use the product at the location where moisture or oil are prevailed such as toilet or
bathroom, laundry, etc.
- It may cause fire and electric shock.
• When using the multi-socket, do not use several appliances at the same time.
- Excessive use of electric power may cause fire and electric shock.
• When gas is leaked, perform the ventilation by opening the window before operating the air
purifier.
- Otherwise, it may cause the explosion, fire, and burn.
• Do not store or use combustible gas or flammable material near the product.
- It may cause fire or product failure.
• If abnormal noise, odor or smoke is coming out from the product, pull out the power plug and
contact the customer care center.
- It may cause fire and electric shock.
• Do not place heavy object on the power cord or have power cord squashed under equipment.
- It may cause fire and electric shock.
• Carry out the installation by avoiding direct sunlight, heating appliance, and dampness.
- It may cause the electric shock, fire, and failure.
• Do not place fire source near to the product.
- It may cause fire.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 3
SAFETY PRECAUTIONS
3
• Insert securely the power plug up to the end of its plug so that it will not be shaken.
- If connection is unstable, it may cause fire.
• Do not arbitrarily change or extend the power line.
- It may cause fire and electric shock.
• Do not allow water to be infiltrated into the product.
- It may cause fire and electric shock.
• Do not place rug etc. on the power cord.
- If heavy object is placed on the rug because the cord is invisible, it may cause fire and electric shock.
• Do not touch the power plug with wet hand.
- It may cause electric shock and injury.
• Do not remove the plug by pulling its power cord section.
- It may cause fire and electric shock.
• Do not place obstacles at the air suction port or discharge port of the product.
- It may cause the product failure.
• Do not use the product where water can be easily splashed.
- It may cause fire or electric shock.
• Do not allow children to climb up the product or arbitrarily touch it.
- It may cause failure, injury.
• Do not move the product while it is under operation.
- It may cause fire and electric shock or partial damage of the product may occur.
• Do not put hands , glue or metal at the air suction port or discharge port of the product.
- It may cause product damage, injury, or electric shock.
• Do not install the product at the location where excessive industrial oil smoke or metallic dust
is prevailed.
- It may cause fire and product failure.
• Do not move the product by grabbing any other parts other than the handle of the product.
- The product may partially be damaged.
• If product repair is required, contact the service center.
- Arbitrary disassemble or repair may cause electric shock or fire.
• If the product is flooded, make sure to contact the service center.
- There is a risk of electric shock or fire.
• Do not apply any impact on the front panel.
- It may cause injury, product damage or electric shock.
• Do not let children or people that are difficult to operate the device safely alone operate the
product.
- It may cause injury or electric shock.
• If the power cord is damaged, request for repair to the service technician to prevent any risk.
- If not, It may cause fire, electric shock or product failure.
ENGLISH
Operation
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 4
4
SAFETY PRECAUTIONS
ENGLISH
! CAUTION
Installation
• When installing near to TV or audio, provide more than 1 m of distance with them.
- TV or audio may have malfunction.
• When pulling out the power plug, pull out by grabbing the head of the plug.
- It may cause injury or electric shock.
• In kitchen, do not use the product as ventilation fan or hood for range.
- The life will be shortened.
• During the cleaning, make sure to stop the product and pull out the power plug.
- The fan is rotating at a high speed, and it may cause injury.
• Avoid places near fire, heating appliances, or under direct sunlight.
- It may cause fire.
• Do not use the product to remove toxic gas such as carbon monoxide.
- It may cause product failure.
• Install the product at the flat location and do not throw it down or give impact.
- It may cause product failure.
• Provide distance of more than 1.5 m from lighting appliance and more than around 10 cm
from the wall.
- It may cause the product discoloration and the cleaning capability may be deteriorated.
• Use only 220 V.
- It may cause fire and electric shock.
• Do not install in transportations (vehicle/vessel, etc.).
- It may cause failure.
Operation
• Do not use the product for special usages/places such as preservations of animal/plant, precision equipment, art pieces, etc.
- It may cause property damage.
• Do not clean with strong detergents such as solvents, but use soft cloth.
- It may cause fire and product deformation.
• If it is not used for a long period of time, pull out the power plug.
- It may cause product failure or fire.
• Do not operate with wet hand.
- It may cause electric shock.
• Do not climb up or place object on Air Purifier.
- It may cause injury by falling or flip over.
• Make sure to insert the pre filter, and clean the filter every month.
- It may cause shortening of the filter life.
• Be sure to insert all the filters before the use and perform regular cleaning of the filter.
- Otherwise, It may cause product failure.
• Install the product at the flat location and do not throw it down or give impact.
- It may cause fire or product failure.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 5
SAFETY PRECAUTIONS
ENGLISH
• Do not use the power cord as tied.
- Heat generation may cause fire.
• Start cleaning and mending after pulling out the power plug and when the fan stops rotating.
- You may get electric shock or injury.
• Do not use it as a ventilator.
- The product life may be shortened.
• Completely dry the pre filter in a shadow until there is no moisture after washing.
- Otherwise, It may cause failure.
• Do not insert inflammables inside the product.
- It may cause fire or product failure.
• Do not let the moisture emitted from the humidifier directly touch the product.
- It may cause electric shock, fire, or product failure.
• Do not open the rear panel while product is in operation.
- Fan is rotating, and it has a risk of injury.
5
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 6
6
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2 SAFETY PRECAUTIONS
17 HOW TO INSTALL FILTERS
17
Filter installation method before use
7 HOW TO INSTALL
7
Selecting installation place
18 HOW TO CLEAN
7
Use the air purifier as this.
19
Filter maintenance method
19
Clean the dustbin
20
How to clean exterior
20
How to clean the sensor
8 NAME OF THE PARTS
8
Product
9
Operation indicator and control part
10
Filter system
11 HOW TO USE
11
Air cleaning operation
12
Indicator display
14
Ionizer operation
14
Sleep operation
15
Filter cleaning function
(Remove large particles.)
15
Lock function
16
Filter check display
21 HOW TO STORE
22 TROUBLESHOOTING BEFORE CALLING FOR SERVICE
24 PRODUCT SPECIFICATION
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 7
HOW TO INSTALL
Selecting installation place
Main Unit
• Place with handy power connections
• Place with no obstacle to clog air inlet
• Place with horizontal surface and rich air circulation
! WARNING
There can be product failure if the air purifier is installed on a moving vehicle such as cars,
boats and others.
! WARNING
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Use the air purifier as this.
• Reduce the use of air purifier if possible when you cook smelly food such as fish grill.
- The vaporized oil from the cooking may affect to the performance and lifetime of the filters,
and the smell may stick on the filter as well.
• Maintain a minimum distance of 1 meter from the air purifier when you sleep.
- The fan speed of the air purifier is not that high. However you may feel a chill.
• Do not place in a corner edge.
- Avoid a place surrounded with furniture and electronic equipment, or in a corner edge.
The air purifier will not function well if it is installed in a corner edge.
ENGLISH
HOW TO INSTALL
7
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 8
8
NAME OF THE PART
ENGLISH
NAME OF THE PARTS
Product
Sensor part
(dust sensor)
Outlet
Operation part
Filter case
(Pre filter + Allergen filter +
Deodorization filter +
HEPA filter)
Sensor part
(odor sensor)
Cleaning brush for pre filter
Do not rotate it with your hand.
It may cause failure of product.
Front panel
Power Plug
Dustbin
Air inlet
h Shape of the power cord can be different by country.
h The shape of the sensor could differ by the model.
h The odor sensor measures odors.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 9
NAME OF THE PART
ENGLISH
Operation indicator and control part
Overall Cleanness display
Overall cleanness including odor
and dust is displayed in 4-level color
Wind speed display
Auto
Odor/dust
display
Turbo
High
PM 10
Mid
PM2.5
Low
PM1.0
Filter cleaning display
Sleep display Filter check display
Lock display
Sleep
Odor Dust
hr
Cleaning
Filter
Ionizer
Filter Clean
Ionizer
(3Sec.)
Speed
Start/stop button
Indicator
Sleep
Indicator button
Dust indicator display Speed button
9
Filter Clean button
Sleep button
Ionizer display
Ionizer button
Start/stop button
Use to start and stop the product.
Speed button
It adjusts wind volume.
Indicator button
It selects micro dust size and displays dust density.
Sleep button
It adjusts wind volume for sound sleep and can set the time when
the clean lighting is turned off.
Filter clean button
Air cleaner operation stops, and as the pre filter cleaning brush rotates, it removes the dust accumulated in the pre filter.
Ionizer button
It generates ion and romoves various bactteria in the indoor air.
Lock function
Pressing the Speed button and the Indicator button together for
3seconds lock/unlock the lock function
Dust indicator display
Show the size of Micro dust particles and its density.
Filter Check display
If the Filter Check display on, check if the filter is contaminated, and
if it is seriously contaminated, clean or replace the filter.
h Dust particle size guide
PM10 : dust particle size is equal or below 10μm (occurs in the combustion at the site, automobile exhaust, etc.)
PM2.5 : dust particle size is equal or below 2.5μm (consists of ion, carbon compounds, and
metal compounds)
PM1.0 : dust particle size is equal or below 1.0μm (cigarette smoke, etc.)
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 10
10 NAME OF THE PART
ENGLISH
Filter system
HEPA filter
Allergen filter
Pre Filter
Filter name
Pre Filter
Allergen filter
Deodorization filter
HEPA filter
Deodorization
filter
Anti-bacteria
filter case
Function
It is filter for large particles removal and is done with anti-biotic treatment, which helps the life extension.
It absorbs and decomposes allergen which could cause allergy.
The comprehensive deodorization filter removes cigarette smoke(odor), putrid
food smell, animal hair odor, NO2, toilet odor, alkali & acid smell, organic compound(VOCs).
HEPA filter removes minute particles such as acarid dead body, pollen, cigarette smoke(particles), minute dust, floating fungus, animal hair and so on.
The filter washing and replacement cycles may depend on the user environment.
!
NOTE
• If you request filter cleaning to the service center, we will clean it with a charge for actual
cost.
• The filter replacement frequency can vary depending on the operational environment.
• The filter composition can vary depending on a model in use.
• If you need more and change filter, please contact the LG service center.
• Nothing but an operation with the filter equipped guarantees a normal air purification
process.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 11
HOW TO USE
11
ENGLISH
HOW TO USE
Air cleaning operation
It cleans the indoor with clean and fresh air.
1. Press the
button to start air cleaning operation
2. Press the
Speed button to select wind speed.
• Pressing the
in turn.
Speed button changes wind speed from Auto → Low → Mid→ High → Turbo
Auto
Low
Mid
High
Turbo
Turbo
High
Mid
Mid
Auto
Low
• The mode is set in auto when the product starts its initial operation.
(Under the auto operation mode, wind volume is automatically adjusted depending on the contamination level of indoor air.)
• During the sensor stabilization time(30 seconds) after the operation start, cleanliness display is
prepared to be displayed at the display.
…
PM 10
Odor Dust
• After 30 seconds, overall cleanliness and dust density is displayed. Since the odor sensor is stablized after 2 minutes after operation start, contamination level of PM10, PM2.5, PM1.0 is displayed for cleanliness.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 12
12 HOW TO USE
ENGLISH
Indicator display
1. Press the
Indicator button and check the density of PM10 / PM2.5 / PM1.0
• Pressing the button each time checks the density of PM10 → PM2.5 → PM1.0 in turn.
Pressing the Indicator button during operation displays the density of PM10 / PM2.5 / PM1.0
at the display for 10 seconds.
Overall cleanliness color display
Dust particle size
PM 10
Odor Dust
Odor/dust display
Dust density display
• Check the dust particle size display window.
• Dust density is displayed based on the dust density window with the highest contamination
level.
Exmaple) When PM10 density is 79 (normal), and PM2.5 is 90 (bad), and PM1.0 is 50 (normal), PM2.5 value is displayed for dust density.
Cleanliness is displayed in 4-level color depending on the contamination level of PM10 / PM2.5 /
PM1.0 and odor.
(contaminated) Red → Orange → Green → Blue (clean)
• When the displayed cleanliness is above bad/very bad, the cause of bad level (dust/odor) is displayed in addition to cleanliness color display.
Overall cleanliness color is displayed based on the worst level among PM10 / PM2.5 / PM1.0
and odor.
Checking method of overall cleanliness
Overall
cleanliness
Status
Red
Dust density (unit μg/m3)
Status
Odor density
PM 10
PM 2.5
PM 1.0
Level
Very Bad
Equal or above
151
Equal or above
101
Equal or above
101
Very
strong
4
Orange
Bad
81~150
51~100
51~100
Strong
3
Green
Normal
31~80
16~50
16~50
Normal
2
Blue
Good
Equal or below
30
Equal or below
15
Equal or below
15
Weak
1
h Dust density is displayed in the unit of one from 8 to 999.
When it comes to the dust density values, we referred to the data sheets provided by the
sensor supplier.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 13
HOW TO USE 13
ENGLISH
Overall cleanliness color display
Dust particle size
Odor Dust
Odor/dust display
PM1.0
Dust density display
• Explanation on the display : Since PM1.0 density is Bad(Orange) with 80μg/m3, display dust at
the odor/dust display. Since ‘odor’ is displayed at the odor/dust display, odor density is also
strong. Since PM1.0 is displayed at the dust particle size display, the density level of PM1.0 is
higher than that of PM10 or PM2.5
Reference
• PM10 and PM2.5 cleanliness follows the provided by the Ministry of environment(Air KOREA). (2015)
- The overall cleanliness level displayed on the product may be different from a level announced by Ministry of environment(Air KOREA).
• The dust density level for PM1.0 has been displayed in the same manner as the dust density level for
PM2.5. (LG Electronics standards)
• The displayed density of PM10 / PM2.5 could differ from the forecast of the Ministry of environment(Air
KOREA) and from other measurement devices or products.
- Indicated dust concentration values can differ from each other depending on the differences in dust
measuring methods and also from real dust concentration levels.
- The assessment of dust density was made against dust used for LG Electronics standards tests.
• In case you use the product which generates steam and micro particles (humidifier, cooling device,
spray, etc.), micro dust density could change.
• Since the cleanliness display shows overall dust and odor, it could differ from the density value of
PM10, PM2.5, and PM1.0.
• Even in the same space, the PM10 density value could differ from other products due to air circulation.
• The overall cleanliness display could change in response to the chemicals contained in air freshener,
perfume, deodorizer, and cosmetics.
• The displayed dust density value could change depending on the installation environment (affected by
sofa, bed, carpet, vacuum cleaner, humidity, smoke, bugs, fats, etc.)
• The displayed density value of PM10/PM2.5/PM1.0 could change depending on the surrounding environment (construction site, road side, plant, etc.)
• The density of micro dust could be measured high near exit doors, windows, and ventilation holes or
under the environment where outside air flows in.
• Do not clean the sensor with other materials other than alcohole or water. It may cause product failure.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 14
14 HOW TO USE
ENGLISH
Ionizer operation
It generates negative ion and removes various bacteria in the air.
1. Start the air purifier by pressing the
2. Press the
button.
Ionizer button.
• It removes hazardous substances such as bacteria, virus and others in the air.
• Whenever it is pressed it changes the operation sequence as Ionizer → reset function →
Ionizer.
① Ion Cluster
generation by
the polar linkage of water
particle in the
air
② Sterilization
ion encircles
various hazardous substances.
③ Generation of
OH(hydroxyl)
that is weak
to different
chemical reactions
④ Reaction between hydroxyl (OH)
and hazardous substances
⑤ Clean air removed hazardous
substances
Sleep operation
It makes quiet and pleasant environment when sleeping.
1. Start the air purifier by pressing the
2. Press the
button.
Sleep button.
• It changes to low noise operation that fits for sleeping.
• When Sleep Mode is on, Sleep Mode is only displayed.
• The reservation time can be set in the order of 2 hours → 4hours → 8hours → 12hours →
Disable
3. Fan speed at Sleep Mode.
• If the
Sleep button is pressed, it runs automatically as Low fan speed for an hour and the
fan speed after is controlled by the air quality.
• During the Sleep Mode you may change the fan speed in sequence of Auto → Low → Mid →
High → Turbo whenever
Speed button is pressed.
4. How to disable Sleep Mode: Press the
Sleep button again.
h Once Sleep Mode is set, all other display is off except the Sleep Mode.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 15
HOW TO USE 15
When operating Filter Cleaning Function, the purifier operation stops. The cleaning brush for pre
filter starts rotating to remove the particles settled on the filter. The particles removed from pre
filter come together into the dustbin lower. Clean the dustbin periodically.
Refer to page 19 for the dustbin cleaning.
For automatic operation
• It operates automatically filter cleaning after use for a certain period. You don't need to do
separate operation.
• It shows 5 minutes on the operation display and performs cleaning filter for specified time.
• It doesn't activate while sleep operation.
For manual operation
1. Press
Filter Clean button.
• It starts filter cleaning in 5 seconds.
• It shows 5 minutes on the operation display and performs cleaning filter for specified time.
• Whenever press one time, it switches into Filter Cleaning → Deactivation → Filter Cleaning in
order.
• When you want to operate the purifier while cleaning filter, press the Filter Clean button
once again to cancel.
Lock function
1. Press the
button.
2. Press the
Speed button and
• It sets Lock function
Indicator button simultaneously for over 3 seconds.
with the sound "Ting".
• It may protect the product by unwanted operation by children or others.
• Press the
Speed button and
disable the Lock function.
Indicator button simultaneously for over 3 seconds to
• If press of any button does not work, check for the Lock function and disable the Lock.
• If power cord is unplugged, the lock function is also disabled.
h Even when the product is stop, you may enable and disable Lock function by pressing
Speed button and
Indicator button simultaneously for over 3 seconds.
ENGLISH
Filter cleaning function(Remove large particles.)
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 16
16 HOW TO USE
ENGLISH
Filter check display
1. If the filter check display on, turn off the power of the operating product by pressing
button
and unplug the power cord from the outlet.
2. Open the front panel of the product and check the filter. If the filters are contaminated, clean
or replace.
h Please refer to the page 18~19 for the filter cleaning and replacement method.
<How to initialize filter replacement (How to turn off filter replacement indicator)>
Method1. Open the front panel for over 10 seconds.
Method2. Unplug the power cord from power outlet.
h Since the filter check display is automatically disabled after 24 hours. Thus replace the filter
within the time.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 17
HOW TO INSTALL FILTERS 17
Filter installation method before use
Use the filter after removing the vinyl cover.
1. Open the front panel by pulling.
2. Remove the filter from the main unit.
3. Remove the vinyl cover of the filter.
4. Install the filter that vinyl packing is removed.
Remove
the
vinyl.
5. Close the front panel.
6. Use on a flat surface with no obstacles
around the product.
! CAUTION
If the vinyl cover is not removed and installed, the product would not blow wind.
ENGLISH
HOW TO INSTALL FILTERS
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 18
18 HOW TO CLEAN
ENGLISH
HOW TO CLEAN
1. Ensure to shut down before cleaning.
Hold knob then pull forward, open the front panel.
Front
panel
2. Lift the knob of dustbin to the upper direction to pull it
out.
3. Pull the filter case out of the main unit.
4. Place the filter case down on the even ground and lift
the fixed hanger of pre filter to the upper
direction to open it.
5. Disassemble pre filter.
6. Clean the dissembled filter according to the filter
cleaning method of the next page.
Deodorization Anti-bacteria
Pre Filter
filter
filter case
Allergen filter
HEPA filter
! CAUTION
• Completely dry the pre filter in a shadow.
• It may cause bad odor if it is used before fully dried.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 19
HOW TO CLEAN 19
Filter maintenance may vary depending on the environment.
h Do not wash Allergen filter, Deodorization filter and HEPA filter with water, but it needs to be
replaced when it is severely contaminated. Be careful not to have filter touch water while
using the product.
h The Filter Check cycle may be different according to the usage environment.
h If you need more filters, please contact the LG service center.
Filter Category
Classification
Washing &
replacement cycle
Maintenance Method
Pre filter
For washing
You don't need to clean separately, thanks to
Around a month the filter cleaning function. However, when
you clean other filters by the vacuum
washing cycle cleaner, just clean together with this filter.
You can use more cleaned one.
Allergen filter
For washing
About a month
washing cycle
Deodorization
filter
For washing
HEPA filter
For washing
1
Pre filter
Using a natural detergent and water to clean
it off.
Soak the filter in warm water for 1 hour.
Around 6 months
Remove particles from the filter by shaking
washing cycle
the water from the filter.
Around 6 months Rinse washable HEPA filter by shower mawashing cycle chine.
2
Allergen filter
3
Deodorization filter
Clean the dustbin
Cover the front panel after cleaning dustbin. Please cover it tightly,
otherwise it doesn't operate.
1. Ensure that you turn off the power while operation.
Pull the front panel forward to open.
2. Lift the knob of dustbin to the upper direction to pull it out.
3. Empty the dustbin.
4. To settle the dustbin, you should fit the side hole of dustbin into
the guide of large particles filter.
Front
panel
4
HEPA filter
Picture 1
Picture 2
Picture 3
Picture 4
ENGLISH
Filter Maintenance Method
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 20
20 HOW TO CLEAN
ENGLISH
How to clean exterior
Wipe the air purifier with a soft cloth wrung out in warm water. Especially, the air inlet around
can accumulate dust. Clean periodically.
! CAUTION
• Do not clean the main body control part and display part with alkali detergent.
• Do not clean the surface of the air purifier using sulfuric acid, hydrochloric acid or organic
solvent (thinner, kerosene and others). Do not put stickers on the surface. It may damage
surface of the product.
• Wipe with soft cloth when cleaning. There may be exterior damage by scratching or others.
• When cleaning the product, do not let water get into the product inside. Turn off power
and unplug the power cord before cleaning. (Always check whether fan is moving.)
How to clean the sensor
Open the sensor cover on the rear side of the product.
Clean the lens with a soak cotton swab with little water and wipe again with a dry cotton swab.
! CAUTION
Do not clean the sensor with other materials other than alcohole or water. It may cause product failure.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 21
HOW TO STORE 21
ENGLISH
HOW TO STORE
How to store
If you do not use the product for extended periods of time, keep at dried and shaded place.
1. Start the air purifier by pressing the
button.
• If it has operated over an hour on a fine day, it can remove the moisture and mildews inside
the product.
2. Stop the air purifier by pressing the
button and unplug the power cord.
Power plug
h Shape of the power cord
can be different by country.
3. Filters have to be removed from the product, enclosed tightly in a vinyl bag and store them in
shade place without direct ray.
• If the filters are stored during rainy season, it may cause bad odor.
4. Please clean the main body of the air purifier and store it well.
Store the main body after packing with vinyl cover to prevent any dust or foreign substances
get in when it has to be kept for extended period of time.
• Wipe with soft cloth when cleaning.
There may be exterior damage by scratching or others.
• Store it at a cool place without direct sun ray.
5. Do not store the product at the place with high moisture or exposed to direct sun ray.
• It may cause bad odor, deformation, malfunction and others.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 22
22 TROUBLESHOOTING BEFORE CALLING FOR SERVICE
ENGLISH
TROUBLESHOOTING BEFORE CALLING FOR
SERVICE
If there is a problem with the product, check the following cases first before requesting service
to the service center.
Symptom
Check
It does not start at
all.
• Isn’t the power plug pulled out?
• Isn’t the voltage too low?
• Insert correctly into the socket.
• Check if it is 220V~.
Wind amount is
small and there is
a noise.
• Is the pre filter clogged?
• Is dust accumulated on the
HEPA filter?
• Clean the pre filter.
• Clean the HEPA filter.
• Is the indoor contamination severe?
• Is dust accumulated on the pre
filter?
• Is dust accumulated on the
HEPA filter?
• Isn’t the usage place too wide?
• Ventilate first before usage.
Air purification
does not work
well.
Actions
• Clean the pre filter.
• Clean the HEPA filter.
• Use the product appropriate for the usage
area. (Avoid places with fluent ventilation
such as entrance, window, etc.)
• Are there obstacles nearby?
• Please remove obstacles.
• Is the product installed in a cor- • Please change the installation location.
ner?
• Is it used at a place with a lot
of smoke or odor?
• The air cleaning function may be degraded where there are a lot of smoke
There is a strange
or odor. Please use the Air Purifier
odor coming out of
after ventilation.
air outlet.
• Is there abnormal odor from the • Please clean the deodorization filter.
deodorization filter?
There is an odor,
but the Indicator
lamp does not
change.
The Indicator lamp
is continuously on
with red color.
Button does not
work well.
• Isn’t red light turned on in the
Indicator lamp?
• Indicator lamp indicates the cleanliness
through the odor sensor. Odor sensor
may not respond to food odor since it is
a sensor detecting contamination gas.
But the odor is removed by the deodorization filter.
• Doesn’t the color change even
if it is moved to a clean room?
• If the quantity of odor is greater than
the ability that can be processed by
the Air Purifier, the display may not
change.
• Do not use sprays near the Air Purifier.
• Did you use spray near the Air
Purifier?
• Is the lock lamp on the operation part turned on?
• Press Speed button and Indicator
button together for 3 sec. to reset the
lock setting.
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 23
TROUBLESHOOTING BEFORE CALLING FOR SERVICE 23
Check
Actions
There has been no • Isn’t there foreign substance at • Refer to how to clean the sensor and
the sensor?
then clean the dust cleaner.
change in micro
dust concentra• Are you using in an enclosed
• In an enclosed area, the cleanliness intion.
area?
dication levels can stay unchanged.
The fine dust concentration value
keeps showing
high.
There is difference
between the comprehensive cleanliness level color
and dust concentration value.
• Is the place of installation lo• In an environment where the inflow of
cated where the inflow of air is
air is made, the concentration value
made constantly?
can keep showing high.
• Doesn’t the odor / dust indicator display ‘Odor’?
There is difference
between the Ministry of environ• Is there difference between
ment(Air KOREA)
the Ministry of environment(Air
guide and compreKOREA)
hensive cleanliness level.
• The comprehensive cleanliness level
evaluates odor and dust concentration
comprehensively and then displays. If
an odor is strong although the dust
concentration is low, the comprehensive cleanliness level may display a different color.
• There can be difference between the
Ministry of environment(Air KOREA)
guide which indicates an average
value during a given period time and
comprehensive cleanliness level indicated on the air cleaner which is
measured and then displayed on a real
time basis.
• Doesn’t the deodorization filter • The filter replacement frequency can
produce any odor?
differ depending on the user environment.
• Is it an environment which is
• The life of the filter can get sharply refull of odors?
duced if it is used for long when you
The filter produces
cook food or grill fish / meat. Open the
odors.
window and ventilate the room as
much as possible when you cook
food. After ventilation, use the air
cleaner in order to accomplish the purpose of eliminating remaining odors.
The odor and dust
indicator do not
display.
• Does the comprehensive
cleanliness level turn yellow or
green?
• Only when the dust concentration
level is Bad / Very Bad or odor concentration Strong / Very Strong, the odor /
dust indicator displays a substance as
the cause of pollution.
ENGLISH
Symptom
1.MFL42657823,영영 2016. 8. 30. 영영 11:30 Page 24
24 PRODUCT SPECIFICATION
ENGLISH
PRODUCT SPECIFICATION
Depth
Width
Height
The external dimension, design and product standard can change to improve the quality of the
product.
Model name
AS70GPWF1
Power supply
220 V~ 50 Hz
Weight of Product
Appearance Size(mm)
Power consumption
16.2 kg
475 (Width) x 680 (Height) x 300 (Depth)
90 W
hThe rating on the manual displays a range for possible usage, so it could be different from the
rating on the label, which displays the rating of the using region on the product.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising