LG | LP-H55BTM4 | LG LP-H55BTM4 Owner’s Manual

OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : FLOOR STANDING
www.lg.com
P/NO : MFL67087202
Floor Standing Type Air Conditioner Ownerʼs Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Safety Precautions.................3
Write the model and serial numbers here:
Model #
Serial #
Preparation before operation...6
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
Air conditioner operation ....10
Care and Maintenance .........18
Before you call for service ..20
n Staple your receipt to this page in the event you need it
to prove date of purchase or for warranty issues.
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive care on your part can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call for
service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Contact the installer for installation of this unit.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
• Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
2 Floor Standing-Type Air Conditioner
Safety Precautions
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
n Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is
classified by the following indications.
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage.
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
n Installation
Do not use a defective or
underrated circuit breaker.
Use this appliance on a
dedicated circuit.
• There is risk of fire or electric
shock.
Install the panel and the cover
of control box securely.
• There is risk of fire or electric
shock.
Do not modify or extend the
power cable.
• There is risk of fire or electric
shock.
For installation, always contact the
dealer or an Authorized Service Center.
• There is risk of fire, electric
shock, explosion, or injury.
For electrical work, contact
the dealer, seller, a qualified
electrician, or an Authorized
Service Center.
• Do not disassemble or repair the
product. There is risk of fire or
electric shock.
Always install a dedicated
circuit and breaker.
• Improper wiring or installation
may cause fire or electric shock
Do not install, remove, or reinstall the unit by yourself
(customer).
• There is risk of fire, electric
shock, explosion, or injury.
Always ground the product.
• There is risk of fire or electric
shock.
Use the correctly rated
breaker or fuse.
• There is risk of fire or electric
shock.
Be cautious when unpacking
and installing the product.
• Sharp edges could cause injury.
Be especially careful of the case
edges and the fins on the
condenser and evaporator.
Do not install the product on a
defective installation stand.
Be sure the installation area
does not deteriorate with age.
• It may cause injury, accident, or
damage to the product.
• If the base collapses, the air
conditioner could fall with it,
causing property damage, product
failure, and personal injury.
Owner's Manual 3
Safety Precautions
n Operation
Do not let the air conditioner run for a
long time when the humidity is very high
and a door or a window is left open.
• Moisture may condense and wet
or damage furniture.
Do not plug or unplug the
power supply plug during
operation.
• There is risk of fire or electric
shock.
Do not allow water to run
into electric parts.
• It may cause There is risk of fire,
failure of the product, or electric
shock.
When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.
Take care to ensure that power
cable could not be pulled out or
damaged during operation.
• There is risk of fire or electric
shock.
• There is risk of fire or electric
shock.
Do not touch(operate) the
product with wet hands.
Do not place a heater or
other appliances near the
power cable.
• There is risk of fire or electrical
shock.
• There is risk of fire and electric
shock.
Do not store or use flammable
gas or combustibles near the
product.
• There is risk of fire or failure of
product.
If strange sounds, or small or
smoke comes from product. Turn
the breaker off or disconnect the
power supply cable.
• Do not use the telephone or turn
switches on or off.
There is risk of explosion or fire
• There is risk of electric shock or
fire.
Do not open the inlet grill of the
product during operation.
(Do not touch the electrostatic
filter, if the unit is so equipped.)
When the product is soaked
(flooded or submerged),
contact an Authorized
Service Center.
• There is risk of physical injury,
electric shock, or product failure.
Do not place anything on the
power cable.
• There is risk of fire or electric
shock.
Ventilate the product from time to time when
operating it together with a stove, etc.
• There is risk of fire or electric shock.
When the product is not be used for a long
time, disconnect the power supply plug or
turn off the breaker.
• There is risk of product damage or failure, or
unintended operation.
4 Floor Standing-Type Air Conditioner
Do not use the product in a
tightly closed space for a
long time.
• Oxygen deficiency could occur.
Stop operation and close the window
in storm or hurricane. If possible,
remove the product from the window
before the hurricane arrives.
• There is risk of property damage,
failure of product, or electric shock.
Be cautious that water could
not enter the product.
• There is risk of fire, electric shock,
or product damage.
Turn the main power off when cleaning or
maintaining the product.
• There is risk of electric shock.
Take care to ensure that nobody could step
on or fall onto the outdoor unit.
• This could result in personal injury and product
damage.
Safety Precautions
CAUTION
n Installation
Always check for gas
(refrigerant) leakage after
installation or repair of product.
• Low refrigerant levels may cause
failure of product.
Do not install the product where the
noise or hot air from the outdoor unit
could damage the neighborhoods.
• It may cause a problem for your
neighbors.
Install the drain hose to
ensure that water is drained
away properly.
• A bad connection may cause
water leakage.
Use two or more people to
lift and transport the
product.
• Avoid personal injury.
Keep level even when
installing the product.
• To avoid vibration or water
leakage.
Do not install the product where
it will be exposed to sea wind
(salt spray) directly.
• It may cause corrosion on the product.
Corrosion, particularly on the condenser
and evaporator fins, could cause product
malfunction or inefficient operation.
n Operation
Do not expose the skin directly to cool air for
long periods of time. (Don't sit in the draft.)
• This could harm to your health.
Do not use the product for special purposes, such as
preserving foods, works of art, etc. It is a consumer air
conditioner, not a precision refrigeration system.
• There is risk of damage or loss of property.
Do not block the inlet or
outlet of air flow.
Use a soft cloth to clean. Do
not use harsh detergents,
solvents, etc.
• It may cause product failure.
• There is risk of fire, electric shock,
or damage to the plastic parts of
the product.
Do not step on or put
anyting on the product.
(outdoor units)
Always insert the filter securely.
Clean the filter every two weeks or
more often if necessary.
Do not insert hands or other objects
through the air inlet or outlet while
the product is operated.
• A dirty filter reduces the efficiency
of the air conditioner and could
cause product malfunction or
damage.
• There are sharp and moving parts
that could cause personal injury.
• There is risk of personal injury and
failure of product.
Do not drink the water
drained from the product.
• It is not sanitary and could cause
serious health issues.
Do not recharge or
disassemble the batteries.
Do not dispose of batteries
in a fire.
• They may burn or explode.
Use a firm stool or ladder
when cleaning or
maintaining the product.
• Be careful and avoid personal
injury.
All batteries (whether installed
or attached) should not be
exposed to excess heat like
sunlight or similar source.
• They may burn or explode.
Do not touch the metal parts of
the product when removing the
air filter. They are very sharp!
• There is risk of personal injury.
Replace the all batteries in the remote
control with new ones of the same
type. Do not mix old and new batteries
or different types of batteries.
• There is risk of fire or explosion
If the liquid from the batteries gets
onto your skin or clothes, wash it
well with clean water. Do not use the
remote if the batteries have leaked.
• The chemicals in batteries could
cause burns or other health
hazards.
Owner's Manual 5
Preparation before operation
Preparation before operation
Features
1. Design for cooling and heating
6. 3 cooling/heating speeds
2. Super energy efficiency
7. Removable air filter
3. Micom control
8. Anti-Bacteria filter
4. Whisper quiet operation
9. 3 minutes delay circuit
5. Wireless remote control
Air Outlet Vent
Air Intake Vent
(Rear)
Remote Signal
Receptor
Air Outlet
Vent
Air Intake Vent
Piping
6 Floor Standing-Type Air Conditioner
Preparation before operation
Indoor Unit Controls and Indicators
7
8
6
5
14 9
(Heat Pump Model)
7
10
6
5
14 13
12
11
12
11
2
4
1
3
2
4
1
3
(Cooling Model)
1. START/STOP BUTTON
Operation starts when this button is pressed and
stops when the button is pressed again.
8. HEATING OPERATION LAMP
2. OPERATION MODE SELECTION BUTTON
Used to select the operation Mode.
10. AUTO OPERATION LAMP
9. DEFROST OPERATION LAMP
11. OFF TIMER OPERATION LAMP
3. ROOM TEMPERATURE SETTING BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTION
Used to select fan speed in three steps-low, med,
high.
5. FAN OPERATION LAMP
12. AUTO AIR FLOW OPERATION LAMP
13. JET COOL OPERATION LAMP
(OPTIONAL)
14. OUTDOOR UNIT OPERATION LAMP
6. COOLING OPERATION LAMP
7. SOFT DRY OPERATION LAMP
Owner's Manual 7
Preparation before operation
Name and Function-Remote Control
1
1. Signal Transmitter
• Transmits the signals to the floor standing type air
conditioner
2
2. Operation Display of the Remote Control
11
4
12
10
7
13
4. Cooling ON Button
5. Temperature Setting Buttons
8
14
15
3
6
5
3. Indoor Fan Speed Selection Button
• To select the desired fan speed in three steps [Low,
Mid, High]
6. Power ON/OFF Button
• Operation will start when this button is pressed, and
stop when the button is pressed again.
7. Auto Airflow Direction Control Button
(Except TM* Model)
• The horizontal louvers swing up and down.
8. Auto Airflow Direction Control Button
• The vertical louvers swing left and right.
(Heat pump Model)
1
9. Auto Mode Operation Button (Cooling Model Only)
10. Heating Button (Heat Pump Model)
2
11. Indoor Fan Operation Button
11
4
12
9
7
13
8
14
15
3
6
12. Timer Set Button
• Each time the button is pressed, the mode is changed
in the following process.
Time set (1, 2, 3, 4, 5, 6, 7 hours)
If you select "0:00" the off Timer function will be
cancelled.
13. Soft Dry Operation Button
14. JET Cool Operation Button(optional)
15. Auto Air Flow Operation Button
5
Wireless Remote Control Puts all functions at your fingertips
Handling the remote control
(Cooling Model)
8 Floor Standing-Type Air Conditioner
• Aim at the signal receptor on the floor standing type air
conditioner when operating.
• The remote control signal can be received at a distance of up to
about 7meters.
• Be sure that there are no obstructions between the remote
control and the signal receptor.
• Do not drop or throw the remote control.
• Do not place the remote control in a location exposed to direct
sunlight, or next to a heating unit, or other heat source.
Preparation before operation
Remote Control Preparation
1. How to mount onto a wall
Use the screws to secure the holder to the wall or attach the holder side of indoor unit.
2. To insert the remote control to the holder.
Insert
Pull
How to insert batteries
1. Remove the cover from the back of the
remote controller.
• Slide the cover according to the arrow
direction.
• Do not use rechargeable batteries
such batteries as different from
standard dry cells in shape,
dimensions, and performance.
2. Insert two batteries.
• Be sure that the (+) and (-) directions are
correct.
• Be sure that both batteries are new.
• Change the batteries with a new
one if the remote control does not
work properly after using for an
extended length of time.
3. Re-attach the cover.
• Slide the cover into back position.
Owner's Manual 9
Air Conditioner Operation
Air Conditioner Operation
How to use the Operation Mode Button
• Each time the Operation Mode Selection Button is pressed, the Operation Mode is shifted in the arrow direction.
Cooling Operation
Soft Dry Operation
Heating Operation
(Heat pump Model)
Cooling Operation
Auto Operation
Soft Dry Operation
(Cooling Model)
How to use the Fan speed Button
• Each time the Fan speed Button is pressed, the Fan speed is shifted in the arrow direction.
High
10 Floor Standing-Type Air Conditioner
Low
Mid
Air Conditioner Operation
Cooling Operation Mode
1
2
Press the Start/Stop Button.
Select Cooling Operation.
Press the Operation Mode Selection Button.
Press the Cooling Operation Button on the remote controller.
A/CL
3
Set the temperature lower than the room temperature.
The temperature can be set within a range of 18°C~30°C by 1°C.
To raise the temperature
To lower the temperature
4
Set the Fan Speed.
q Each time the Fan Speed Button is
pressed, the Fan Speed mode is
shifted in the arrow direction.
Owner's Manual 11
Air Conditioner Operation
Soft Dry Operation
1
Press the Start/Stop Button.
2
Select Soft Dry Operation.
Press the Operation Mode Selection Button.
Press the Soft Dry Operation Button on the remote controller.
3
Set the temperature lower than the room temperature.
The temperature can be set within a range of 18°C~30°C by 1°C.
To raise the temperature
To lower the temperature
During softy Dry Operation
• The indoor fan speed is automatically set to low and can be set fan speed.
12 Floor Standing-Type Air Conditioner
Air Conditioner Operation
Heating Operation Mode(Heat Pump Model)
1
Press the Start/Stop Button.
2
Select heating Operation.
Press the Operation Mode Selection Button.
Press the heating Operation Button on the remote controller.
3
Set the temperature upper than the room temperature.
The temperature can be set within a range of 16°C~30°C by 1°C.
To raise the temperature
To lower the temperature
4
Set the Fan Speed.
q Each time the Button is pressed, the
Fan Speed mode is shifted.
Owner's Manual 13
Air Conditioner Operation
Auto Operation Mode(Cooling Model Only)
1
Press the Start/Stop Button.
Auto Operation.
2 Select
Press the Operation Mode Selection Button.
Press Auto Operation Button.
3
Set the temperature upper or lower than the standard temperature.
The temperature can be set within a range of
by 1 level.
Cold Cool Proper
Warm Hot
(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.)
To raise the temperature. (When you feel too cool or cold)
To lower the temperature. (When you feel too warm or hot)
During Auto Operation
• It is impossible to switch the indoor fan speed because of being already set to the best
conditioner by fuzzy rule.
14 Floor Standing-Type Air Conditioner
Air Conditioner Operation
Fan Operation Mode
1
Press the Start/Stop
Button.
3
Set the Fan Speed.
2
Press Fan Operation Button.
MODE
q Each time the Button is pressed, the
Fan Speed mode is shifted.
Airflow Direction Procedure
1
Press the Start/Stop Button.
(Operation will start when the button is pressed,
and stop when the button is pressed again.)
2
Press the Auto Swing Button and then
louvers will swing left and right.
Press the Airflow Direction
Control Button again to set
the Vertical louver at the
desired airflow direction.
The vertical louver swing left and right.
Owner's Manual 15
Air Conditioner Operation
OFF Timer Setting Procedure(OFF TIMER Setting, or CANCEL)
1
2
3
Press the Start/Stop Button.
Select Function.
Press the Timer Button.
• If you press the button, the selected off timer is displayed as follows;
• If you select ‘
4
’, the Off Timer function will be cancelled.
When you finish the Off Timer setting, the Timer indicator lights off.
After 4 seconds
5
During off-timer operation if you press the Timer Button, the rest time will be displayed.
16 Floor Standing-Type Air Conditioner
Air Conditioner Operation
Child Lock Operation Procedure
1
Press the fan speed button and high temperature setting buttons simultaneously for 3 seconds.
The unit will respond with beep.
After 3 second,
it will shift
2
After 3 seconds,
it will shift
During Child Lock Operation
∂ Whenever you press any Button on Display Panel, it will immediately display
“
”, which means Display panel is Locked.
∑ All the Button on the indoor unit Display panel will not work.
∏ But the Button on the remote controller will work.
3
For releasing child lock Operation.
Press the fan speed and high temperature setting buttons simultaneously for 3 seconds
again.
The unit will rospond with beep, Child Lock Operation will be removed.
After 3 seconds,
Child Lock Operation
will be removed
What is Auto Restarting Operation
• In case the power comes on again after a power failure Auto Restarting Operation is designed to operate
automatically to the previous operating condition.
• If the power comes to be failure while off-timer operation, Auto Restarting Operation is cancelled and
function returns to the previous mode.
Owner's Manual 17
Maintenance and Service
Care and Maintenance
Caution: Before performing any maintenance, turn off the main power to the system.
During the season
Cleaning of the air filters.
Recommended about once every two weeks
1
2
Remove the Air Filter.
Take hold of the tab and pull slightly forward to
remove the filter.
Clean.
• To remove the dust adhering to the filters,
either use a vacuum cleaner, or wash them in
water and dry in the shade.
• Re-insert the filter to the original position.
Cleaning of the air conditioner
• Donʼt wash with water.
• Wipe with a soft dry cloth.
There’s the
danger of
electrical
shock.
18 Floor Standing-Type Air Conditioner
Never use any of the followings.
• Water hotter than 40°C.
Could cause deformation and/or
discoloration.
• Volatile substances.
Could damage the surfaces of the air
conditioner.
Maintenance and Service
When the air conditioner is not going to be used for a long time
At the end of the season
At the start of the season
1
Operate the air conditioner at the
following settings for 2 to 3 hours.
• Type of operation : Cooling.
• Temperature setting : 30°C.
This will dry out the internal mechanisms.
1
Clean the air filters, re-insert, then
operate the air conditioner.
2
Turn off the circuit breaker, and
disconnect the plug.
2
Be sure that nothing obstructs the air
outlet and intake vents.
CAUTION
CAUTION
Turn off the circuit breaker when the air
conditioner is not going to be used for a
long time.
Dirt may collect and may cause a fire.
Operation Tips
Do not overcool the room.
Keep blinds or curtains
closed.
Keep the room
temperature uniform.
This is not good for your
health and wastes electricity.
Do not let direct sunshine
enter the room when the air
conditioner is in operation.
Adjust the vertical and
horizontal airflow direction to
ensure a uniform
temperature in the room.
Make sure that the doors
and windows are shut
tight.
Clean the air filter
regularly.
Ventilate the room
occasionally.
Avoid opening doors and
windows as much as
possible to keep the cool air
in the room.
Blockages in the air filter
reduce the airflow and lower
cooling and dehumidifying
effects. Clean at least once
every two weeks.
Since windows are kept
closed, it is a good idea to
open them and ventilate the
room now and then.
Owner's Manual 19
Before you call for service...
Before you call for service...
Troubleshooting Tips! Save time and money!
Check the following points before requesting repairs or service.... If the fault persists, please contact your dealer or
service center.
Case
Does not operate.
Explanation
See page
• Have you made a mistake in timer operation?
-
• Has the fuse blown or has the circuit breaker been
tripped?
• Is the power Switch at Off?
• Is the unit at the starting of Heating Operation?
If yes, Hot-start is activating.
• Is the unit in the Deicing?
If yes, wait for finishing the Deicing.
-
The room has a peculiar odor.
• Check that this is not a damp smell exuded by the
walls, carpet, furniture, or cloth items in the room.
-
It seems that condensation is
leaking from the air conditioner.
• Condensation occurs when the airflow from the air
conditioner cools the warm room air.
-
Air conditioner does not
operate for about 3 minutes
when restarted.
• This is the Protection device of the air conditioner .
• Wait about three minutes and operation will begin.
Does not cool or heat
effectively.
• Is the air filter dirty? See air filter cleaning
instructions.
• The room may have been very hot when the room
air conditioner was first turned on. Allow time for it
to cool down.
• Has the temperature been set incorrectly?
• Are the indoor unit's air inlet or outlet vents
obstructed?
The air conditioner operation is
noisy.
Remote controller display is
faint, or no display at all.
• If the airflow begins before its temperature
become warm, it will cause an undesired
cooling effect. In order to prevent this, the
airflow will not begin until it is sufficiently warm.
• For a noise that sounds like water flowing.
-This is the sound of freon flowing inside the air
conditioner unit.
• For a noise that sounds like the compressed air
releasing into atmosphere.
-This is the sound of the dehumidifying water being
processed inside the air conditioning unit.
• Are the batteries depleted?
• Are the batteries inserted in the opposite (+) and (-)
directions?
-
20
-
-
11
NOTE
WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.
The indoor side is not water resistant and should not be exposed to excess water.
20 Floor Standing-Type Air Conditioner
Before you call for service...
Service Centers
Details of LG serial No.
1
2
3
4
5
6
7
8
9 10
Code
Detail
Code of Model
1
Year
0~9
(Digit)
The last digit of year
ex) 1997 → 7, 2000 → 0
Meaning
2,3
Month
01~12
(Digit)
Month
ex) March → 03, August → 08
4
Nation
A~Z
(Alphabet)
Where manufactured
ex) K → Korea, C → China
5
Product
A~Z
(Alphabet)
ex) A → Airconditioner
6~10
Serial No.
0~9
(Digit)
Production Quantity
■ Service Centers
H. G. IBRAHIM SHAKER COMPANY, LTD.
SERVICE CENTER
* JEDDAH
:
P. O. BOX 50, JEDDAH 21411 KINGDOM OF SAUDI ARABIA
TEL NO. : 6422952 / 6425527
* RIYADH
:
P. O. BOX 15, RIYADH 11411 KINGDOM OF SAUDI ARABIA
TEL NO. : 4020570
* AL-KHOBAR
:
P. O. BOX 78, AL-KHOBAR 31952 KINGDOM OF SAUDI ARABIA
TEL NO. : 8943714
In case of parts being disordered,
please contact with SVC center:
and check the replacement parts code.
Owner's Manual 21
Safety Precautions
22 Floor Standing-Type Air Conditioner
Download PDF

advertising