LG | LV-C602HLA0 | LG LV-C602HLA0 Owner’s Manual

LG
Ceiling & Floor Type Air Conditioner
LG
OWNER'S MANUAL
IMPORTANT
Please read
through this
manual. It contains valuable
information about your air conditioner. This manual may
help save time and money by explaining proper product
maintenance and
preventing improper
use.
PRECAUTIONS
Pay close attention to precautions in order to prevent
potential hazards and damage from misuse or improper
installation. LG is not responsible for any damages caused
by misuse of the product.
Prior to
installation, this air-conditioning
unit must be submitted for
utility
(EN
service which
61000-3
approval by the
provides electricity
Norm.)
P/No.: 3828A20360B
F
Your Records
or
Write the model and serial numbers here:
1.
Safety Precautions
Model #
2.
a.
Operating Instructions
You
Remote Controller
b.
Optional
c.
Set the Current Time and
day
Function
Weekly programming
e.
Holiday Setting
f. Timer
h.
Setting
Operation
Operation
can
find them
on a
label
on
the side of each unit.
Dealer's Name
a
of the week
d.
g.
Serial #
Name and Function of
Date Purchased
R ead This Manual
Mode
Inside you will find many
Procedure
and maintain your air conditioner properly. Just
preventive
3. Care and Maintenance
care on
your
helpful
part
deal of time and money
hints
on
can save
over
how to
you
a
a
use
little
great
the life of your air
conditioner.
4.
Troubleshooting Tips
You'll find many
Before You Call For Service
chart of
answers
to
common
problems
If you review
troubleshooting tips.
our
in the
chart of
you may not need to call
Troubleshooting Tips first,
for service at all.
CAUTION
?
Contact the authorized service technician for
or
?
?
repair
maintenance of this unit.
Contact the installer for installation of this unit.
The air conditioner is not intended for
children
or
use
by young
invalids without supervision.
?
Young children should be supervised to
they do not play with the air conditioner.
?
When the power cord is to be replaced, replacement
work shall be performed by authorized personnel
ensure
that
only.
?
Installation work must be
performed
in accordance
with the national
standards
by
personnel only.
wiring
authorized
Safety
Precautions
Precautions
To
prevent injury and property damage, follow these instructions.
Incorrect
indicated
operation due to ignoring instructions
by the following symbols.
will
cause
WARNING
This
symbol
shows the
CAUTION
This
symbol
indicates the
Installation
harm
or
possibility
the seriousness of which is
damage,
of death
possibility
of
or
injury
serious
or
injury.
to
damage
property.
precautions
WARNING
WARNING
Do not
?
?
install, remove and reinstall the unit by yourself.
Improper installation will cause water leakage, electrical shock, or fire. Please consult
authorized dealer or specialist for the installation work. Please note fault caused by improper
installation is not covered by warranty.
Unit must be installed in an easily accessible area. Any additional cost required to hire a
special equipment to service the unit will be the responsibility of the customer.
WARNING
WARNING
Do not insert hands
Discharge
conditioner is
It will
?
Do not
through
Grille when the air
not
step on the unit and do
put anything on it.
Do not
operate with
wet hand.
operating.
cause an
injury by the
?
It may
cause an
injury.
?
It will
cause
electrical shock.
fan.
When the air filter is to be
When the unit is not
not touch the
removed, do
moving parts or electric
long time,
going
to be used for
a
turn off the circuit breaker.
parts of the unit.
?
It may
?
Besure to disconnect all electric power
before filter cleaning.
When
cause an
an
injury.
abnormality (smell
?
of
abnormal
operate in an
condition, it may cause fire,
damage,
etc. In this case, consult your
cause a
fire.
Repair or relocation should not be done
the customer.
burning,
occurs, stop the air conditioner and
turn off the circuit breaker.
etc)
?
If not, dirt may collect and
If the unit continues to
?
If these
are
done
incorrectly,
it may
cause a
fire, electric shock, injury. Consult your
dealer.
dealer.
3
by
CAUTION
CAUTION
?
Contact the authorized Service technician for
?
Contact the installer for installation of this unit.
?
The air conditioner is not intended for
repair
by young
use
or
maintenance of this unit.
children
or
infirm persons without
supervision.
Young
?
children should be
supervised
to
ensure
that
do not
they
play
with the air conditioner.
CAUTION
CAUTION
Do not clean the air
Ventilate well when used
conditioner with water.
together with
a
When the unit is to be
switch
stove, etc.
off,
cleaned,
and turn off the
breaker.
?
Water may enter the unit and
degrade the insulation. It may
cause an electric shock.
Do not
put
pet
a
where will be
or
house
exposed
?
An oxygen
Do not
plant
to direct
or
shortage
apply
may
occur.
?
high
it may
Do not leave
insecticide
an
Since the fan rotates at
speed during operation,
cause an injury.
flammable spray.
on
stand which is
installation
damaged.
air flow.
?
This could
injure
the
pet
?Itmaycauseafireor
or
Do not
is
?
deformation of the cabinet.
plant.
put
stove, etc. where
a
exposed
When the unit is not
to direct air flow.
be used for
a
The unit may drop or fall down
and cause an injury.
Do not
going to
long time, turn
not
step on the unit and do
put anything on it.
off the breaker.
?
It may cause
combustion.
imperfect
It may
?
operate for a long time
high humidity, e.g. leaving a
door
?
or
In the
?
It may
cause an
dropping
Do not
in
injury.
cause an
Do not
window open.
or
Do not
onto an unstable
bench when
step
falling
use
injury through
down.
for
special
purposes.
attaching/detaching the panel.
if it is
cooling mode,
operated in a room with high
humidity (80%r.h. or more) for a
long time, water condensed in
the air conditioner may drop
and may wet and spoil furniture,
?
It may case
down.
an
injury,
etc.
by
?
Do not
use
this air conditioner
precision devices,
food, animal, plants and art
to preserve
falling
objects.
It may
cause
quality,
deterioration of
etc.
etc.
If the supply cord is damaged, it must
be replaced
When the air filter is to be
by a special cord or
removed, do not touch the
metal parts of the unit.
assembly availible from the
manufacturer of its service agent.
?
If will
cause
electrical shock
or
?
It may
cause an
fire.
injury.
Do not insert hands
vanes
operating.
?
It will
cause an
rotating
4
through
when the air conditioner is
blower.
injury by the
About the remote control
The remote control transmits the
signals
to the
on
the system
system.
Features of the Remote Control- Door Close
2
Heat pump model
Cooling
model
4
1
3
Flip-up door(closed)
START/STOP BUTTON
1
ROOM TEMPERATURE
Operation starts when this
button is pressed and stops
when the button is pressed
again.
3
OPERATION MODE
4
SETTING BUTTONS
Used to select the
room
temperature.
INDOOR FAN SPEED
2
SELECTION BUTTON
Used to select the
SELECTOR
Used to select fan
four
operation
mode.
or
Operation
speed in
steps-low, medium, high,
CHAOS.
Mode
Cooling Operation
Cooling Operation
Auto
Auto
Soft
Soft
Operation
Operation
Dry Operation
Dry Operation
Heating Operation
(Cooling Model)
(Heat Pump Model)
5
Features of the Remote Control- Door
Open
Signal
transmitter
1
7
3
2
ON
OFF
4
8
5
9
SET
CANCEL
6
10
11
Flip-up door(opened)
AIR FLOW DIRECTION START/STOP
OPERATION DISPLAY
1
2
Displays
the
operation
7
conditions.
BUTTON
Used to
stop
or
start louver movement
START/STOP BUTTON
and set the desired
Operation starts when this button is
pressed and stops when the button is
pressed again.
direction.
up/down
airflow
SLEEP MODE AUTO BUTTON
8
Used to set
Sleep
Mode Auto
operation.
OPERATION MODE SELECTION
3
Used to select the
4
AIR CIRCULATION BUTTON
BUTTON
operation
9
mode.
Used to circulate the
cooling
on/off).
or
room
heating (turns
air without
indoor fan
ON/OFF TIMER BUTTONS
Used to set the time of
starting
and
10
stopping operation.
ROOM TEMPERATURE CHECKING
BUTTON
Used to check the
room
temperature.
TIME SETTING BUTTONS
5
Used to
adjust the
time.
11
TIMER SET/CANCEL BUTTONS
6
Used to set the timer when the desired
time is obtained and to cancel the Timer
operation.
6
RESET BUTTON
Used prior to resetting
replacing batteries.
time
or
after
Preparation
before
Storage and Tips
Using
?
For
operation
the Remote Control
The remote control may be stored mounted
?
on a
wall.
To
operate the
?
a
Remove the
battery
direction.
Insert
new
battery
are
batteries
installed
Reattach the
cover
cover
by pulling
making sure
correctly.
by sliding
it
according
that the
it back into
(+)
to the
and
(-)
of
position.
NOTES:
Use 2 AAA(1.5volt) batteries. Do not
use
rechargeable
batteries.
?
Remove the batteries from the remote control if the system is
not
going
to be used for a
long
time.
7
conditioner, aim the
signal receptor.
operate the air conditioner
distance of up to 7m.
How to Insert the Batteries
arrow
air
The remote control will
at
?
room
remote control at the
How to
use
the
Mode Selection button
Operation
Cooling Operation
1
2
Press the
Start/Stop button.
respond with a beep.
The unit will
To select
Cooling Operation,
Each time the button is
pressed,
shifted in the direction of the
Cooling
3
press the
Operation
Mode
Selection button.
the
operation
mode is
arrow.
Auto
Soft
Dry
Heating
(Heat pump model only)
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°Cin 1°C
increments.
To raise the temperature
To lower the temperature
4
You
can
select the fan
speed
in four
CHAOS. Each time the button is
shifted.
8
steps-low, medium, high, or
pressed, the fan speed mode is
Auto
Operation
1
2
Press the
Start/Stop button.
respond with a beep.
The unit will
To select Auto
Operation,
press the
Each time the button is
pressed,
shifted in the direction of the
Cooling
3
Operation
Mode
Selection button.
The
the
Auto
temperature and fan speed
electronic controls based
on
operation
mode is
Soft
Heating
(Heat pump model only)
arrow.
are
Dry
automatically
the actual
room
set
by the
temperature. If
you want to change the set temperature, close the door on
the remote control and press the Room Temperature Setting
buttons. The cooler
or warmer you feel, the more times (up to
you should press the button. The set temperature
will then be changed automatically.
two
times)
To raise the temperature
To lower the temperature
During Auto Operation:
You cannot switch the indoor fan
speed. It has already been set by the Fuzzy rule.
operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be
done by manually resetting.
During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and
down automatically. If you want to stop auto-swing, press the chaos swing button again.
If the
system is
not
9
Soft
Dry Operation
1
2
Press the
Start/Stop button.
respond with a beep.
The unit will
To select Soft
Dry operation,
Each time the button is
pressed,
shifted in the direction of the
Cooling
3
press the
Operation
Mode
Selection button.
Auto
the
operation
mode is
arrow.
Soft
Dry
Heating
(Heat pump model only)
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°Cin 1°C
increments.
To raise the temperature
To lower the temperature
10
Heating Operation(Heat pump
1
2
Press the
model
Start/Stop button.
respond with a beep.
The unit will
To select
Heating operation,
press the
Operation
Mode
Selection button.
Each time the button is
pressed,
shifted in the direction of the
Cooling
3
only)
the
operation
mode is
arrow.
Auto
Soft
Dry
Heating
(Heat pump model only)
Set the
The
temperature higher than the room temperature.
temperature can be set within a range of 16°C~30°Cin
1°C increments.
To raise the temperature
To lower the temperature
4
You
or
can
select the fan
speed
in four
CHAOS. Each time the button is
mode is shifted.
11
steps--low, medium, high,
pressed, the fan speed
Additional features
Sleep
1
Press the
Mode
Sleep
To cancel the
Sleep Mode, press the sleep
Mode Auto button several times until the star
Mode Auto button to set the
time you want the unit to turn off
automatically.
(
2
programmed in one-hour
by pressing the Sleep Mode
increments
Auto
The
operation display.
Sleep Mode will be operated at
speed (cooling) or medium fan
speed (heat pump only) for quiet sleeping.
the
low fan
mode is available for 1 to 7 times. To
sleep
alter the time
in
period
steps of
Mode Button while
Sleep
1
hour, press
aiming
IN COOLING MODE: The
at air
Make
sure
the
Sleep
Setting
Mode Auto LED
lights
temperature will
automatically rise by 1°C over the next 30
minutes and by 2°C in 1 hour for comfortable
sleeping.
conditioner.
1
from the
Note: The
button 1 to 7 times.
3
) disappears
The Timer is
up.
the Time
Time can be set only when you have pressed
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed
2
Press the Time
Setting
buttons until the
desired time is set.
to reset the time.
Press the
button.
Start/Stop
Press the Timer SET button.
SET
Note: Check the indicator
for A.M. and P.M.
Delay Start/Pre-Set Stop
1
Make
sure
the time is set
remote control
correctly
on
the
display.
ON
2
4
Press the selected on/off
SET
pressing
aiming the
remote control at the
signal
receptor.
OFF
Press the ON/OFF Timer
buttons to turn Timer
on or
off.
To cancel the
CANCEL
setting the timer.
Press the Timer Cancel button while
aiming
3
setting by
the Timer SET button while
Press the Time
Setting
buttons until the desired
(The timer lamp on the
display will go out.)
time is set.
NOTE: Select
one
remote control at the
air conditioner and
the
of the
following
four
types of operation.
with the unit
Delay
signal
receptor.
OFF Timer
Delay ON
Timer
Delay
12
running
OFFand ON Timer
Delay
ONand OFF Timer
Vertical Airflow Direction Control
The
up/down airflow (Vertical Airflow)
adjusted by using the remote control.
be
can
Note:
Always use the remote control to adjust the
up/down airflow direction. Manually moving the
vertical airflow direction louver by hand could
damage the air conditioner.
When the unit is shut off, the up/down airflow
direction louver will close the air outlet vent of
the
To
system.
adjust left/right(Horizontal Airflow) direction
Caution
:
Ensure unit is turned off before
adjusting
Press the
1
Start/Stop
button to start the unit.
Carefully
Press Chaos
2
swing
button
Swing
the horizontal airflow direction
control.
button and the louvers will
access
up and down. Press the Chaos Swing
again to set the vertical louver at the
open vertical louver to allow
to the horizontal airflow
direction.
desired airflow direction.
Adjust the left/right
airflow direction
by
hand.
Air Circulation Mode
Circulates the
1
2
Press the
air without
room
Start/Stop
cooling
or
button. the unit will
heating.
respond
with
a
beep.
Press the Air Circulation button. Now each time that you press the Indoor Fan
speed is shifted from low to CHAOS and back to low again.
Speed Selector,
the
fan
CHAOS Air
Fan
speed
is
on
low.
Fan
speed
is
on
medium.
Fan
speed
is
on
high.
Note:
The fan
speed
of the indoor unit will
automatically cycle depending
on
the
room
temperature.
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is
automatically changed from medium to low or vice versa, depending on the ambient temperature.
13
FORCED OPERATION
FORCED OPERATION
Operation procedures
when the remote control
can't be used.
Press the Forced
Operation
button.
If you want to stop operation, press again.
When started, the operation conditions are
automatically set as follows:
During Forced Operation, the
initial mode
continues.
Cooling
Operating
mode
Indoor FAN
Speed
Setting Temperature
Heat pump Model
Model
Room Temp. ≥ 24°C
21°C≤ Room Temp.
Soft
Cooling
Cooling
High
High
Soft
22°C2 2 °C
Air Intake
<
24°C
Room
Dry
Dry
Temp. < 21°C
Heating
Rule
High
Temperature
24°C
AUTO RESTART
In
case
the power
comes on
again
operate procedures automatically
In
case
the air conditioner does not
automatically
after 7 hours.
after
to the
a
power
failure, Auto Restarting Operation is the function
previous operating
receive any signal from
conditions.
the remote
control, it will
turn off
to
Operation
Soft
Details
Mode
Dry Operation
When the
(Refer to page 10)
is
temperature higher than the set temperature, it operates in cooling mode at the
temperature, the set fan speed (if CHAOS mode, then medium.), and then it will be in
automatically switched to Soft Dry Mode when the room temperature reaches the set temperature.
room
set
In Soft
Dry Operation,
the indoor fan
speed
is
switched to the low.
automatically
ROOM TEMP.
ROOM TEMP.
COOLING
SET TEMP. +1°C
SOFT DRY
SET TEMP. -0.5°C
INDOOR
FAN
SETTING
FAN
SPEED
COMP.
OPERATE
LOW COOL
LOW COOL
OPERATION
OPERATION
OPERATE
OPERATE
FOR
FOR
10MINS
10MINS
STOP
STOP
FOR 3 MINS
FOR 7 MINS
OPERATING START
Room
Natural wind by the CHAOS
For
more
fresh
feeling
than other fan
0.5°C
speed,
press the Indoor Fan Speed Selector and set
to CHAOS mode. In this mode, the wind blows
0.5°C
1HOUR
like natural breeze
fan
by automatically changing
speed according to the CHAOS logic.
1 1 /2HOUR
CHAOS MODE OPERATION
Helpful information
Fan
speed and cooling capacity.
cooling capacity indicated in the specification is the value when
High
the fan speed is set to high, and the capacity will be lower at low or
Speed
medium fan speed.
High fan speed is recommended when you wish to cool the room quickly.
The
Temp.
logic (Refer to page 13)
Care and maintenance of the air conditioner
CAUTION: Before performing any
maintenance,
turn off the main power to the
system.
Indoor Unit
Grille, Case, and Remote Control
Turn the
off before
system
cleaning.
clean, wipe with a soft, dry cloth. Do
bleach
use
or
To
Never
use
any of the
followings:
Water hotter than 40°C
?
Could
not
deformation and/or
cause
discoloration.
abrasives.
Volatile substances
?
NOTE:
Could
Supply power must be disconnected before
cleaning the indoor unit.
conditioner.
damage
the surfaces of the air
Horizontal louver
S
INNER
SCOURING
CLBARGER
Benzene
Air outlet vent
Air filters
Air inlet vent
Lift the front
slightly
access
forward to
Clean the filter with
Air Filters
The air filters behind the front
checked and cleaned
once
grille
should be
every 2 weeks
and
the filter tab
pull
the filter.
a vacuum or
warm, soapy
water.
?
or more
often if neccessary.
panel
remove
If dirt is
conspicuous, wash with a
detergent in lukewarm water.
water (50°C or more) is used, it
solution of
?
If hot
may be deformed.
After
washing
with water,
dry well
in the
shade.
Re-install the air filter.
Outdoor Unit
The heat
exchanger coils
and
panel vents of the
regularly. If
clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam
outdoor unit should be checked
cleaned.
(Side)
(Rear)
Air intake vents
Air outlet vents
Control
cover
NOTE:
Dirty or clogged coils will reduce the operating
efficiency of the system and cause higher
operating costs.
Connecting
wire
Piping
Drain hose
When the air conditioner is not going to be used for a long time.
When air conditioner is not
to be used for a
1
long
When the air conditioner is to
going
be used
time.
Operate the air conditioner on Air circulation
mode (Refer to page 13) for 2 to 3 hours.
Clean the air filter and re-install it in the
11
indoor unit.
(Refer to page
?
2
This will
dry
out the internal
again.
16 for
cleaning filters.)
parts.
Turn off the circuit breaker.
CAUTION
CAUTION
Turn off the circuit breaker when the air conditioner
is not
going to be used for a long time.
Dirt may collect and may
cause a
fire.
Check that the air inlet and outlet of the
2
33
indoor/outdoor unit
are
not blocked.
Remove the batteries from the remote
control.
Operation Tips
Do not overcool the
room.
Keep
blinds
or
curtains
closed.
This is not
good
for your
health and wastes
electricity.
Keep the
Do not let direct sunshine enter
Adjust the
horizontal airflow direction to
room
when the air
operation.
ensure a
in the
Make
sure
that the doors
are
Avoid
doors and
opening
windows
to
keep
room.
as
much
shut
as
Clean the air filter
regularly.
tight.
possible
the cool air in the
temperature
the
conditioner is in
and windows
room
uniform.
vertical and
uniform
temperature
room.
Ventilate the
room
occasionally.
Blockages
in the air filter
reduce the airflow and lower
cooling
and
dehumidifying
effects. Clean at least
every two weeks.
17
once
Since windows
it is
are
kept closed,
idea to open them
and ventilate the room now and
a
then.
good
Before you call for service...
Troubleshooting Tips! Save
?
Check the
following points
contact your dealer
or
before
requesting repairs
?
Have you made
operate.
?
Has the fuse blown
been tripped?
has
a
service.... If the fault
peculiar
?
odor.
persists, please
See page
Explanation
The air conditioner does not
room
or
money!
service center.
Case
The
time and
a
mistake in timer
or
12
operation?
has the circuit breaker
-
Check that this is not a damp smell exuded by
the walls, carpet, furniture, or cloth items in the
-
room.
It
is
seems
that condensation
leaking
?
from the air
Condensation occurs when the airflow from
the air conditioner cools the warm room air.
-
conditioner.
Air conditioner does not
?
This is the
operate for about
?
Wait about three minutes and
3 minutes
or
operation
will
-
begin.
when restarted.
Does not cool
protector of the mechanism.
heat
effectively.
?
Is the air filter
instructions.
?
The
dirty?
See air filter
cleaning
16
may have been very hot when the
air conditioner was first turned on. Allow
time for it to cool down.
room
room
The air conditioner
operation
is
?
Has the
?
Are the indoor unit's air inlet
obstructed?
?
noisy.
For
a
temperature been
8, 11
incorrectly?
or
outlet vents
-
noise that sounds like water
-This is the sound of freon
air conditioner unit.
?
set
flowing
For a noise that sounds like the
air releasing into atmosphere.
flowing.
inside the
compressed
-
-This is the sound of the dehumidifying water
being processed inside the air conditioning
unit.
Remote control
?
Are the batteries
faint,
?
Are the batteries inserted in the
and (-) directions?
?
This sound is
or no
display is
display at all.
Crack sound is heard.
depleted?
7
opposite (+)
generated by the
expansion/constriction of the front panel,
due to changes of temperature.
etc.
-
NOTE
WATER RESISTANT: The outdoor side of this
appliance
is WATER RESISTANT.
The indoor side is not water resistant and should not be
18
exposed
to
excess
water.
Details of LG serial No.
1234567891 0
Code
Detail
1
Year
Code of Model
Meaning
The last
0~9
ex)
(Digit)
Month
2,3
01~12
Month
(Digit)
ex)
Nation
4
A~Z
Product
of year
7, 2000
March
0
03, August
08
Where manufactured
(Alphabet)
5
digit
1997
A~Z
ex)
K
Korea, C
China
ex)
A
Airconditioner
(Alphabet)
6~10
Serial No.
Production
0~9
Quantity
(Digit)
Main Service Part List
NO
PART NAME
1
COMPRESSOR
2
MOTOR
3
CROSS FLOW FAN
4
MAIN PCB ASSY
5
DISPLAY PCB ASSY
6
REMOCON
7
FRONT GRILLE
8
TRANSFORMER
H. G. IBRAHIM SHAKER
COMPANY, LTD.
SERVICE CENTER
*
JEDDAH
P. O. BOX 50, JEDDAH 21411 KINGDOM OF SAUDI ARABIA
TEL NO.
*
RIYADH
TEL NO.
*
AL-KHOBAR
:
6422952 / 6425527
P. O. BOX 15, RIYADH 11411 KINGDOM OF SAUDI ARABIA
:
4020570
P. O. BOX 78, AL-KHOBAR 31952 KINGDOM OF SAUDI ARABIA
TEL NO.
:
8943714
Memo
Download PDF