LG | 776FM | LG 776FM Owner’s Manual

User's Guide
776FM
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this monitor, observe the following basic rules for its
installation, use, and servicing. Keep it in an accessible place for future
however
reference.
On
Use
Safety
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
only the
cord, make
sure
provided by the supplier. If the
manufacturer
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
or
The power supply cord is used as the main disconnect device. Ensure that the
socket-outlet is easily accessible after installation.
a power source indicated in the specifications of
the monitor. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Operate
the monitor
this manual
or
listed
only from
on
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Hands must be
Do not
It
dry when holding the
damage the
can cause
Make
may result in
fire
sure to
or
power cord by
electric shock.
completely insert the
are
a
power
dangerous. So are frayed
shock
plug
or
to avoid an electric shock.
disassembling, bending, pulling
power
power
fire hazard. Call your service
or
plug. Insecure connections
heating
can cause
fire.
Do not
Open
There
the Monitor.
are no user
serviceable components inside.
Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the monitor is not operating properly.
There
are
To Avoid Personal
Injury
:
on a sloping shelf unless properly secured.
place
a
stand
recommended
only
by the manufacturer.
Do not try to roll a stand with small casters across thresholds or deep pile
Do not
Use
carpets.
the monitor
up.
To Prevent Fire
or
Hazards:
Always turn the monitor OFF if you leave the room for more than a short period
of time. Never leave the monitor ON when leaving the house.
Keep children from dropping or pushing objects into the monitor's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this monitor.
During a lightning storm or when the monitor is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Do not bring magnetic devices such as magnets or motors near the picture
tube.
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the monitor where the power cord is subject to damage.
Do not
use
this monitor
sink, laundry tub, in
near water
such
basement,
as near a
place
bathtub, washbowl, kitchen
swimming pool.
Monitors are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
a wet
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug,
can cause
etc.
Place the monitor in
a
built-in enclosure unless proper ventilation is
Cover the openings with cloth or other material.
Place the monitor near or over a radiator or heat
Do not install the monitor in
On
a
dusty area. It
provided.
source.
can cause
fire.
Cleaning
Unplug the monitor before cleaning the face of the monitor screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the
monitor
On
screen
because overspray may
cause
electrical shock.
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
the Monitor
Turn off the
Carefully
equipment and all attached options.
set the monitor face-down with the underside
facing you.
Installation
1.
Align the hooks
on
the tilt/swivel stand with the
matching slots
in the base of
the monitor.
2. Insert the hooks into slots.
3. Slide the tilt/swivel stand toward the front of the monitor until the latches click
into the locked
position.
Slots
Latch
Hooks
Latch
A2
the Monitor
Connecting
On the back of the monitor
power
1
2
cord,
are
plug-in connections; one for the AC
signal cable from the video card.
two
and the other for the
Power off both the monitor and PC.
Connect the 15 pin VGA connector of the supplied signal cable to the output
on the PC and the matching input connector on the rear
VGA video connector
of the monitor. The connectors will mate only one way. If you cannot attach
easily, turn the connector upside down and try again. When mated,
the cable
tighten the thumbscrews to
2'
secure
the connection.
appropriate MAC to VGA adapter block at your local computer
adapter changes the high density 3 row 15 pin VGA connector to
the correct 15 pin 2 row connection to mate with your MAC. Attach the other
end of the signal cable to the side of the adapter block with 3 rows.
Locate the
store. This
Connect the attached adapter block/signal cable to the video output
MAC.
3
on
your
One end of the AC power cord is connected into the AC power connector on
the back of the monitor. The other end is plugged into a properly grounded
three-prong AC outlet.
4
5
Power
If you
on
see
the PC, then the monitor.
the SELF DIAGNOSTICS message, check the
signal cable and
connectors.
6 After using the system, power off the monitor, then the PC.
IBM PC
AUD
IN
MACINTOSH
MIC
UT
Mac
D-15P
3
Signal
Adapter
2
2'
D-15P
Cable
Mic Out
Power Cord
Audio In
*
NOTE
:
For
Apple
Macintosh use,
separate plug adapter is needed
change the
15
pin high density (3 row)
on the supplied
pin 2 row connector.
D-sub VGA connector
cable to
A3
a
15
a
to
Location and Function of Controls
Front View
Left Side Jacks
Front Panel Controls
Rear View
ID Label
AUD
IN
MIC
OUT
AC Power Socket
D-Sub
Mic Out
Audio In
A4
Signal Cable
Control Panel Function
Front Panel Controls
Sound Mute
OSD Button
SET Button
OSD
Sound Menu
Built-in
SET
<Shortcut
?
100
Indicator
Keys>
Function
Sound Menu
To
Sound Mute
Used to select mute
adjust sound
mute off
Built-in
(DPMS)
Brightness and Contrast can be adjusted directly without
entering the On Screen Display (OSD) system. Press the
buttons to display the menu and then the
buttons to adjust the settings. To save all changes, press the
OSD button. The Brightness and Contrast functions are also
available in the On Screen Display (OSD) menu.
Control
Microphone
OSD Button
OSD
Power
Button
Microphone
100
Power Button
Built-in
(means
menu.
on
sound
(means
on).
sound
off)
and
Microphone.
Use this button to enter
or
exit the
on screen
display.
Button
Use these buttons to choose
on screen
SET
SET Button
Use this button to enter
screen
or
adjust
items in the
display.
a
selection in the
on
display.
Power Button
Use this button to turn the monitor
Power (DPMS)
Indicator
The power indicator light is shown in the power
button. This Indicator lights up green when the
monitor operates normally. If the monitor is in DPM
on or
off.
(Energy Saving) mode (stand-by/suspend/power
off), this indicator color changes to amber.
A5
Control Panel Function
Left Side Jacks
Headphone
Jack
Headphone Jack that automatically mutes
speaker volume when headphone is
the
attached.
Microphone
Jack
An external
microphone can be used
microphone.
instead of the built-in
Rear Panel
Jacks
Mic. Out
Connects
microphone
sound to PC via
cable.
AUD
IN
MIC
OUT
Audio In
Connects
speaker
sound to PC via cable
attachment.
Microphone Operation
On the left side there is
a
MIC (Microphone) jack. By plugging
a
microphone
in
here, it may reduce the long length of cable needed to reach the PC's sound card.
In order to use this MIC jack, you need to use a cable (supplied) to plug into the
rear
of the monitor (MIC OUT) and into the MIC input jack of your sound card (if
available).
Audio Features
major feature of this monitor is its built-in audio system. This conveniently
integrates a stereo audio amplifier and speakers without taking up any more
space. Because the monitor is designed like this, you can easily upgrade to audio
capable multimedia applications by attaching your PC with sound card to the back
of this monitor. It will result in significantly less cabling and space requirements.
A
A6
On Screen
Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of
the monitor are quick and easy with the On Screen Display Control system.
A quick example is given below to familiarize you with the use of the controls.
Following section is an outline of the available adjustments and selections you
can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before
To make
adjustments
in the On Screen
Display, follow these steps:
OSD
SET
SET
OSD
12
Press the OSD Button, then the main
To
access a
becomes
making image adjustment.
control,
highlighted,
use
the
or
menu
of the OSD appears.
Buttons. When the icon you want
press the SET Button.
3
Use the
45
Accept the changes by pressing the SET Button.
Exit the OSD
Buttons to
adjust the item
by pressing the OSD Button.
A7
to the desired level.
procedure of selection and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the items that are shown on the Menu.
You
were
introduced to the
BRIGHTNESS CONTRAST
100
Brightness
Used to adjust the brightness
of the
screen.
100
Contrast
Adjust the display to the
Vertical Position
POSITION
To
image
move
66
45
up and down.
Horizontal Position
To
picture image
move
left and
right.
Vertical Size
SIZE
To
49
64
adjust image height.
Horizontal Size
To
SHAPE
contrast desired.
adjust image width.
Tilt
To correct
image
rotation.
Side Pincushion
To correct the
Side
bowing
pincushion
in and out of the
image.
balance
To correct the balance of both sides
bowling.
Parallelogram
This control
screen
adjusts for a skewing
image.
of the
Trapezoid
To correct
Corner
geometric distortion.
Top
To correct the
irregular distortion
displayed image.
of the
Corner Bottom
To correct the
irregular distortion
displayed image.
of the
On Screen
Display(OSD) Selection
OSD
Adjust
Adjustment
Description
PRESET 6500K / 9300K
COLOR
PRESET
and
6500K
To appear the displays color temperature.
?
6500K : Slightly reddish white.
9300K
TEMP
?
9300K
:
Slightly
bluish white.
RED
GREEN
User
TEMP
BLUE
easily color set without adjustment Red,
(R/G/B).
Green and Blue
SETUP
VIDEO LEVEL
0.7V
LANGUAGE
ENGLISH
OSD TIME
20SEC
RED
To set your
own
color levels.
GREEN
To set your
own
color levels.
BLUE
To set your
own
color levels.
VIDEO LEVEL This item is used to select the monitor's input
signal level. The normal level used for most
PC's is 0.7V. When the screen suddenly gets
brightened or blurry, please select 1.0V and
try again.
LANGUAGE To choose the
names are
OSD POSITION To
language
displayed.
adjust position
in which the control
of the OSD window
on
the
screen.
DEGAUSS To
SPECIAL
DEGAUSS
ON
RECALL
ON
RESET
ON
MOIRE
H: 0/V: 0
manually demagnetize the screen which
some image or color incorrectly.
may show
RECALL
You can use this function when you want to go
back to the screen display of the time you
purchased the product after adjusting to modify it
in the Preset Mode.
RESET
factory default settings except
Brightness, Contrast, Tilt, Color
9300K, Video Level, OSD Time, Moire (These reset
options may differ depending on the mode selected:
Preset, User, or New).
1024X768/85Hz
PRESET MODE
Return to all
"LANGUAGE":
If you don't want to reset the monitor, use the
button to select CANCEL and then press the
SELECT
(or SET)
button.
This item allows you to reduce the moire (Moire
is caused by interference Horizontal Scan Line
MOIRE
with the
periodical dot screen). It is normally
OFF(H:0/V:0).
The moire adjustments may affect the focus of
the screen. The screen image may shake
slightly while the moire reduction function is on.
A9
Sound Selection and
You
were
Adjustment
introduced to the
procedure of selection and adjusting an item
the OSD
using
descriptions
To make
system. Listed below are the icons, icon names, and icon
of the items that are shown on the main Menu.
adjustments
OSD
in the On Screen
Display, follow these steps:
Adjust
Description
VOLUME
VOLUME
Raises
or
lowers audio level.
TREBLE
Raises
or
lowers treble level.
BASS
Raises
or
lowers bass level.
BALANCE
Changes
70
ON
TREBLE
65
ON
BASS
70
ON
BALANCE
balance of
left/right speaker
level.
0
ON
MICROPHONE
MICROPHONE
Enables
usage.
ON
A10
or
disables
microphone
Video
Memory
Modes
Perset Modes
(Resolution)
Display Modes (Resolution)
1234
Horizontal
Freq.(kHz)
Vertical
Freq.(Hz)
VESA
640
x
480
37.50
75
VESA
800
x
600
46.88
75
VESA
800
x
600
53.68
85
VESA
1024
68.677
85
x
768
A11
Troubleshooting
Check the
following before calling for service.
SELF DIAGNOSTICS(NO SIGNAL) message.
The signal cable is not connected, or is loose. Check and
secure
the connection.
OUT OF FREQUENCY(OUT OF RANGE) message appears.
The frequency of the signal from the video card is outside the operating range of
the monitor.
*
Horizontal Frequency : 30-70kHz
Vertical Frequency : 50-160Hz
*
Use the
graphics board's utility software
graphics board).
change the frequency setting (Refer
to
to the manual for
The power LED is illuminated amber.
Display power management mode.
There is no active signal coming from the PC.
The signal cable is not fastened securely.
Check the computer power and graphics adapter configuration.
image on the SCREEN is
rectangle shape.
The
Image adjustment
OSD, SET and
not been done
not
centered,
or
too
small,
or
not a
yet in the
buttons to set the
current operating mode. Use the
image to your liking.
The monitor doesn't enter the power saving off mode (Amber).
Computer video signal is not VESA DPMS standard. Either the PC or the video
controller card is not using the VESA DPMS power management function.
An abnormal
picture is displayed on the screen. For example, the
picture may be missing or dark.
upper part of the
If
using certain non-VESA Standard video card, an abnormal picture may be
displayed. Try setting it to one of the factory preset modes, or selecting to a
resolution and refresh rate within the specification limits of the monitor.
NOTE
If the power indicator(LED)
the monitor.
light
is
blinking amber,
Then press a power ON/OFF button
technician for more information.
on
the front
A12
may result in abnormal condition of
panel
control and call your service
Specifications
Picture Tube
17 inch (16.0 inches viewable) Perfect Flat Tube
90
degree deflection
0.24mm Slot
pitch
W-ARAS(Wide Anti-Reflective Anti-Static) coating
Sync Input
Video
Input
Horizontal
30
Input Form
Separate, RGB Analog, 0.7Vp-p/75 ohm,
Resolution(max)
1280
RMS Audio
Audio
71kHz (Automatic)
Freq.
Vertical Freq.
Input Form
Signal Input
50
-
160Hz (Automatic)
-
Separate, TTL, Positive/Negative
15 pin D-Sub Connector
1W
x
1024@60Hz
1W (R+L)
Output
Input Sensitivity
Speaker Impedance
0.7 Vrms
Power
Max
≤ 115W
Consumption
Normal
≤
74W
Stand-by/Suspend
≤
15W
Power Off
≤5W
Width
46.0
cm
/ 18.1 inches
Height
Depth
43.9
cm
/ 17.28 inches
44.0
cm
/ 17.3 inches
Dimensions (with
tilt/ swivel stand)
Power
Input
+
8Ω
AC 100-240V~50/60Hz 2.0A
Weight
Net
Environmental
Operating Condition
10 ˚C to 40 ˚C
Temperature
10 % to 90 % non-Condensing
Humidity
Condition
Storage
0 ˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
Conditions
17.5
kg (38.6 lbs)
NOTE
Information in this document is
subject to change without
A13
notice.
Positive
Download PDF