LG | GR-B257SBJ | LG GR-B257SBJ Owner’s Manual

OWNER’S MANUAL
SXS
REFRIGERATOR
Please read this owner's manual thoroughly before
operating and keep it handy for reference at all times.
P/No. : MFL31095452
www.lg.com
Table of contents
Introduction
Installation
Operation
Suggestion on
food storage
Care and
maintenance
2
Entry
3
Important safety instruction
3
Identification of parts
4
Where to locate
5
Door removal
6
Height adjustment
7
Starting
8
Adjusting the temperatures and functions
8
Ice making(Applicable to some models only)
11
Humidity control in the vegetable compartment
12
Convert into a vegetable or meat compartment (Applicable to some models only)
12
Deodorizer (Applicable to some models only)
13
Shelf (Applicable to some models only)
13
Egg box
13
Location of foods
14
Storing foods
15
How to dismantle parts
16
General information
17
Cleaning
17
Trouble shooting
18
Specifications
22
Introduction
Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase
Dealer purchased from
Dealer address
Dealer phone no.
Model no.
Serial no.
:
:
:
:
:
:
Important safety instruction
This refrigerator must be properly installed and located in accordance with the
installation instructions before it is used.
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly
and pull straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over or
damage the power cord.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
Unplug the power cord from the power plug for cleaning or other cares. Never touch
it with wet hands because you can get an electric shock or be hurt.
Never damage, process, severely bend, pull out, or twist power cord because power
cord damage may cause a fire or electric shock. You have doubts on whether the
appliance is properly grounded.
Never place glass products in the freezer because they may be broken when their
inner matters are frozen.
Don’t use an
extension cord
If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
other appliances or household lights from causing an overload that could cause a power
outage.
Accessibility of
Supply Plug
Supply Cord
Replacement
The refrigerator-freezer should be so positioned that the supply plug is accessible for
quick disconnection when accident happens.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Do not modify or extend the Power Cord length.
It will cause electric shock or fire.
Warning
Don’t store
Don’t store or use gasoline or other flammable
vapor and liquids in the vicinity of this or any other appliance.
3
Introduction
DANGER: Risk of child entrapment.
Before you throw away your old refrigerator or freezer:
Take off the doors but leave the shelves in place so that children may not easily climb
inside.
Child entrapment
warning
Warning
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Warning
Children should be supervised to ensure that they do not play with the appliance.
In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
shock by providing an escape wire for the electric current.
In order to prevent possible electric shock, this appliance must be grounded
improper use of the grounding plug can result in an electric shock. Consult a qualified
electrician or service person if the grounding instructions are not completely
understood, or if you have doubts on whether the appliance is properly grounded.
Grounding (Earthing)
Identification of parts
Freezer
compartment
Refrigerator
compartment
Milk product corner
Lamp
Shelf
Door rack
Door rack (1 piece or 2 piece)
Shelf
Snack drawer (Optional)
Shelf
(steel or glass)
Ice separation
handle (Optional)
Ice making
compartment (Optional)
Ice box (Optional)
Egg box (Optional)
Lamp
Shelf (Folding or Normal)
Door rack
Door rack
Vegetable drawer
(1 or 2)
Drawer (1 or 2)
Door rack
Humidity switch
Lower cover
NOTE
•
4
If you find some parts missing from your unit, they may be parts only used in other
models.
Installation
Where to locate
1. Place your appliance where it is easy to use.
Select a good
location
2. Avoid placing the unit near heat sources,
direct sunlight or moisture.
3. To ensure proper air circulation around the
fridge -freezer, please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the appliance must be
leveled.
5. Don't install the appliance below 5°C. It may
cause affect the performance.
This appliance contains fluid (refrigerant, lubricant)and is made of parts and
materials which are reusable and/or recyclable.
All the important materials should be sent to the collection center of waste
material and can be reused after rework (recycling). For take back, please contact
with the local agency.
Disposal of the
old appliance
5
Installation
Door removal
Warning
Electric Shock Hazard
Disconnect electrical supply to refrigerator
before installing.
Lower cover
Failure to do so could result in death or
serious injury.
If your access door is too narrow for the refrigerator to pass through, remove
the refrigerator door and pass the refrigerator laterally.
Remove lower
cover
Remove the lower cover by lifting upward.
NOTE
•
Remove the
freezer
compartment
door
If a tube end is deformed or abraded, cut the part away.
Hinge
cover
1) Removing the hinge cover by loosening the
screws. Separate all connection wires except
for the earth line after.
Connection
wires
Upper hinge
2) Remove the keeper by rotating it counter
clockwise () and then lifting the upper
hinge up ().
Earth line
Upper hinge
Keeper
NOTE
•
When removing the upper hinge, be careful that the door does not fall forwards .
3) Remove the freezer compartment door by lifting
it upward.
Lower hinge
1) Loosen the hinge cover screws and remove
the cover. Remove connection wire, if any,
except for the earth line.
Remove the
refrigerator
door
Connection
wires
2) Remove keeper by rotating it clockwise ()
and then remove the upper hinge by lifting
it up ( ).
Upper hinge
Keeper
3) Remove the refrigerator compartment door
by lifting it up.
Lower hinge
Pass the
refrigerator
Pass the refrigerator laterally through access
door as shown in the right figure.
6
Max
5
4
3
2
1
Min
1
FRZ
TEMP
2
REF
TEMP
3
4
5
Max
Installation
Height adjustment
If the freezer
compartment door
is lower than the
refrigerator
compartment door
Level the door by inserting flat ( - type) driver into the groove of the left height adjusting
screw and rotate it clockwise ().
If the freezer
compartment door
is higher than the
refrigerator
compartment door
Level the door by inserting flat ( - type) driver into the groove of the right height
adjusting screw and rotate it clockwise ().
After leveling the
door height
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
7
Operation
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
Adjusting the temperatures and functions
Express freezer.
Lock button.
Temperature adjustment button
for freezer compartment.
Temperature adjustment button
for refrigerator compartment.
NOTE
•
8
Your model may not include every option.
Operation
You can adjust temperature of and freezer room and refrigerator room.
How to adjust the
temperature in
the freezer
compartment
Freezer Compartment temperature adjustment
How to adjust the
temperature in
the refrigerator
compartment
Refrigerator Compartment temperature adjustment
❇ Whenever pressing button, setting is repeated in the order of (Middle) ➔
(Middle Strong) ➔ (Strong) ➔ (Weak) ➔ (Middle Weak).
The actual inner temperature varies depending on the food status, as the
indicated setting temperature is a target temperature, not actual temperature
within refrigerator.
Refrigeration function is weak in the initial time. Please adjust temperature as
above after using refrigerator for minimum 2~3 days.
Please select this function for
prompt freezer.
OFF➝ ON➝ OFF is repeated
whenever pressing
button.
ON
OFF
The arrow mark graphic remains
at the On status after flickering 4 times when selecting Special Refrigeration On.
Prompt freezer function automatically turns off after a fixed time passes.
Express freezer
This button stops operation of
different button.
Lock
9
Locking or Release is repeated
whenever the
is pressed
more than 3 seconds.
LOCK
UNLOCK
If you use the ALARM/LOCK button, none of the other buttons will work until you
unlock them.
Operation
The other
functions
Ambient temperature display window.
Temperature is displayed only by –9°C ~ 49°C.
Temperature less than -10°C is indicated with ‘LO’ and temperature more than 50°C
is indicated with ‘HI’.
Temperature may differ from the actual ambient temperature as it is monitors
on the upper part of refrigerator (top of door).
Door open warning
3 times of warning sounds at the interval of 30 seconds if a minute passes with the
door of refrigerator and the hombar door opened or completely closed.
Please contact with the local service center if warning continue to sound even after
closing the door.
Diagnosis (failure detection) function
Diagnosis function automatically detects failure when failure is found in product during
the use of refrigerator.
If failure occurs at product, it does not operate though pressing any button and normal
indication is not done. In this case, do not turn power off but immediately contact with
the local service center. A lot of time are need for service engineer to detect the failed
part if turning it off.
10
Operation
Ice Making
(Applicable to some models only)
When making Ice
Fill water in ice making box of the ice
making corner.
If water is fully filled the ice will not be
separated well and water can be
dropped to make ice lumped.
Ice Making Box
Ice will be dropped into the ice storage
bin by rotating ice separation handle of
ice making compartment.
NOTE
•
11
Rotating the ice separation handle before ice is fully frozen may cause the
remaining water drop into the ice storage bin to lump the ice together.
Operation
Humidity control in the vegetable compartment
The humidity can be controlled by adjusting the humidity control switch to the
left/right when storing vegetables or fruits.
High humidity
HIGH
HUMIDITY CONTROL
LOW
LOW
HIGH
LOW
Low humidity
HIGH
IGH
H
HUMIDITY CONTROL
LOW
Convert into a vegetable or meat compartment
(Applicable to some models only)
The bottom drawer in the refrigerator can be converted into a vegetable or meat
compartment
The meat compartment maintains the temperature at a lower point than the
refrigerator compartment so that meat or fish can be stored fresh longer.
NOTE
Vegetables or fruits are frozen if the conversion switch is set to meats
compartment. So, be sure to check it before storing foods.
• Because fish or food stored in the refrigerator for a long period of time can go
bad, make sure you store it in the freezer when storing for a long period of time.
•
Deodorizer (Applicable to some models only)
This system efficiently absorbs strong odors
by using the optical catalyst. This system does
hot have any affect on stored food.
How to use the
deodorizing
system
Since it is installed already installed onto the cool air intake duct from the from
the refrigerator compartment, you need no separate installation.
Please use closed containers to store food with pungent odors.
Otherwise, this oder can be absorbed by other food in the compartment.
12
Operation
Shelf (Applicable to some models only)
Slide-Under
Shelf
You can store taller items such as a gallon container or bottles by simply pushing in
front half of shelf underneath back half of shelf. Pull toward you to return to a full shelf.
Egg box (Applicable to some models only)
You can move the egg box to wherever you want.
[Type-1]
[Type-2]
NOTE
•
•
13
Never use the egg box as an ice storage bin. It can be broken.
Never store the egg box in the freezer compartment or fresh compartment.
Suggestion on food storage
Location of foods
(Refer to identification of parts)
Snack drawer
Store small foods such as bread, snacks, etc..
Freezer
compartment
shelf
Store various frozen foods such as meat, fish,
ice cream, frozen snacks, etc..
Freezer
compartment
door rack
Freezer
compartment
drawer
Store small packed frozen food.
Temperature is likely to increase as door
opens. So, do not store long-term food
such ice cream, etc..
Store meat, fish, chicken, etc.. after
wrapping them with thin foil.
Store dry.
Store milk products such as butter, cheese,
etc..
Milk product
corner
Place this egg box in the proper location.
Egg box
Refrigerator
compartment
shelf
Store side dishes or other foods at a proper
distance.
Refrigerator
compartment
door rack
Store small packed food or beverages such
as milk, juice, beer, etc..
Vegetable drawer
Store vegetables or fruits.
Vegetable
drawer
/meat drawer
conversion corner
Store vegetable, fruits, meat to thaw, raw
fish, etc.. setting the conversion switch as
necessary.
Be sure to check the conversion switch
setting before storing foods.
14
Suggestion on food storage
Storing foods
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an
important factor in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, and
melons.
Allow hot food to cool prior to storing, placing hot food in the refrigerator could spoil
other food, and lead to higher electric bills.
When storing the food, cover it with vinyl wrap or store in a container with a lid. This
prevents moisture from evaporating, and helps food to keep its taste and nutrients.
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator
temperatures even.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator,
and cause temperatures to rise.
Never keep too many foods in door rack because they may be interrupted by inner
racks so that the door cannot be fully closed.
Freezer
compartment
Refrigerator
compartment
Do not store bottles in the freezer compartment - they may break when frozen.
Do not refreeze food that has been thawed. This causes loss of taste and nutrition.
When storing frozen food like ice cream for a long period, place it on the freezer
shelf, not in the door rack.
Do not touch the cold foods or containers- especially made of metallic -, with wet
hands and place glass products in the freezer compartment.
- That’s why you may have chilblains and they may be broken when their inner matters
are frozen, causing personal injury.
Avoid placing moist food upmost refrigerator shelves, it could freeze upon direct
contact with chilled air.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and
wiped, and packed food should be wiped, to prevent adjacent food from spoiling.
When storing eggs in their storage rack or box, ensure that they are fresh, and always
store them in a up-right position, which keeps them fresh longer.
NOTE
•
15
If you keep the refrigerator in a hot and humid place, frequent openning of the door
or storing a lot of vegetables in it may cause dew to form which has no effect on its
performance. Remove the dew with dust cloth free from care.
Care and maintenance
How to dismantle parts
NOTE
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
• The light bulbs will turn off if door is left open for seven continuous minutes.
Shutting door for one second will light bulbs to come back on.
•
1
Separate the lamp by pulling it out (➂) while
slightly striking (➀) and rotating (➁) the lamp cover.
Turn the bulb counterclockwise. Max. 40 W bulb for
refrigerator is used and can be purchased at a
service center.
Freezer
compartment
lamp
2
3
1
To remove a shelf, push the shelf to the left , lift
the left part of the shelf a bit , lift the right part up
➂ , and take it out.
Freezer
compartment
shelf
Lift the door rack to direction holding both
sides and pull it out to direction.
Door rack and
support
Lamp in
refrigerator
compartment
Insert the tool into the marked area () and push
the tool to disconnect.
Use the tool with the flat tip such as (-) screw driver.
Turn the bulb counterclockwise. Max. 40 W bulb
for refrigerator is used and can be purchased at a
service center.
2
Vegetable
compartment
cover
To remove the vegetable compartment
cover, pull out the vegetable compartment
a bit to the front , lift the front part of the
vegetable compartment cover as shown by
, and take it out.
1
16
2
3
Care and maintenance
General information
Vacation time
During average length vacations, you will probably find it best to leave the refrigerator
in operation. Place freezable items in freezer for longer life.
When you plan not to operate, remove all food, disconnect the power cord, clean the
interior thoroughly, and leave each door OPEN to prevent odor formation.
Power failure
Most power failures that are corrected in an hour or two will not affect your
refrigerator temperatures.
However, you should minimize the number of door openings while the power is off.
If you move
Remove or securely fasten down all loose items inside the refrigerator.
To avoid damaging the height adjusting screws, turn them all the way into the base.
Anti
condensation
pipe
The outside wall of the refrigerator cabinet may sometimes get warm, especially just
after installation.
Don’t be alarmed. This is due to the anti-condensation pipe, which pumps hot
refrigerator to prevent “sweating” on the outer cabinet wall.
Cleaning
It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled
food should be wiped up immediately, since it may acidify and stain plastic surfaces if
allowed to settle.
Use a lukewarm solution of mild soap or detergent to clean the durable finish of your
refrigerator.
Wipe with a clean damp cloth and then dry.
Exterior
Interior
Regular cleaning is recommended. Wash all compartments a baking soda solution or a
mild detergent and warm water. Rinse and dry.
After cleaning
Please verify that the power cord is not damaged, power plug is not overheated, or
power plug is well inserted into the power consent.
Warning
Always remove power cord from the wall outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or cloth to prevent water or liquid from
getting into any electrical part and causing an electric shock.
Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline
solutions, flammable or toxic cleaning liquids on any surface.
Do not touch frozen surfaces with wet or damp hands, because damp object will stick
or adhere to extremely cold surfaces.
17
Care and maintenance
Trouble shooting
Before calling for service, review this list. It may save you both time and expense.
This list includes common occurrences that are not the result of defective
workmanship or materials in this appliance.
Occurrence
Possible cause
Solution
Runing of
refrigerator
Refrigerator
compressor
does not run.
Refrigerator
runs too much
or too long
Refrigerator control is off.
Set refrigerator control. See setting the
controls.
Refrigerator is in defrost cycle.
This is normal for a fully automatic
defrosting refrigerator. The defrost
cycle occurs periodically.
Plug at wall outlet is disconnected.
Make sure plug is tightly pushed into
outlet.
Power outage. Check house lights.
Call local electric company.
Refrigerator is larger than the previous
one you owned.
This is normal. Larger, more efficient
units run longer in these conditions.
Room or outside weather is hot.
It is normal for the refrigerator to work
longer under these conditions.
Refrigerator has recently been
disconnected for a period of time.
It takes some hours for the refrigerator
to cool down completely.
Large amounts of warm or hot food
may have been stored recently.
Warm food will cause the refrigerator to
run longer until the desired temperature
is reached.
Warm air entering the refrigerator
causes it to run longer. Open the door
less often.
Doors are opened too frequently or too
long.
Refrigerator or freezer door may be
slightly open.
Make sure the refrigerator is level.
Keep food and containers from
blocking door. See problem section.
OPENING/CLOSING of doors.
Refrigerator control is set too cold.
Set the refrigerator control to a
warmer setting until the refrigerator
temperature is satisfactory.
Refrigerator or freezer gasket is dirty,
worn, cracked, or poorly fitted.
Clean or change gasket. Leaks in the
door seal will cause refrigerator to run
longer in order to maintain desired
temperatures.
Thermostat is keeping the refrigerator at
a constant temperature.
18
This is normal. Refrigerator goes on and
off to keep the temperature constant.
Care and maintenance
Occurrence
Possible cause
Solution
Temperatures are
too cold
Temperature in the
freezer is too cold
and the refrigerator
temperature is
satisfactory.
Freezer control is set too cold
Set the freezer control to a warmer
setting until the freezer temperature is
satisfactory.
Temperature in the
refrigerator is too
cold and the freezer
temperature
is satisfactory.
Refrigerator control is set too cold.
Set the refrigerator control to a
warmer setting
Food stored in
drawers freezes.
Refrigerator control is set too cold.
See above solution.
Meat should be stored at temperature
just below the freezing point of water (32 ˚ F,
0 ˚ C) for maximum fresh storage time.
It is normal for ice crystals to form due
to the moisture content of meat.
Freezer control is set too warm.
Set the freezer control to a colder
setting until the freezer temperature is
satisfactory.
Refrigerator control is set too warm.
Refrigerator control has some effect on
freezer temperature.
Set the freezer control to a colder
setting until the freezer temperature is
satisfactory.
Doors are opened too frequently or too
long.
Warm air enters the refrigerator/ freezer
whenever the door is opened.
Open the door less often.
Door is open slightly.
Close the door completely.
Large amounts of warm of hot food
may have been stored recently.
Wait until the refrigerator or freezer
has had a chance to reach its selected
temperature.
Refrigerator has recently been
disconnected for a period of time.
A refrigerator requires some hours to
cool down completely.
Refrigerator control is set too warm.
Set the refrigerator control to a colder
setting.
Meat stored in
fresh meat
drawer freezes.
Temperatures
are too warm
Temperatures in
the freezer is too
warm.
Temperatures in
the refrigerato or
freezer is too
warm.
Temperature in the
refrigerator
is too warm and
the freezer
temperature is
satisfactory.
19
Care and maintenance
Occurrence
Possible cause
Solution
Odors in refrigerator
Interior needs to be cleaned.
Clean interior with sponge,warm water
and baking soda.
Food with strong odor is in the refrigerator.
Cover food completely.
Some containers and wrapping materials
produce odors.
Use a different container or brand of
wrapping materials.
Door(s) will not
close.
Food package is keeping door open.
Move packages that keep door from
closing.
Door(s) will not
close.
Door was closed too hard, causing other
door to open slightly.
Close both doors gently.
Refrigerator is not level. It rocks on the
floor when it is moved slightly.
Adjust the height adjusting screw.
Floor is uneven or weak.
Refrigerator rocks on the floor when it
is moved slightly.
Be sure floor is level and can adequately
support refrigerator.
Contact carpenter to correct sagging or
sloping floor.
Refrigerator is touching wall or cabinets.
Move refrigerator..
Food is touching shelf on top of the
drawer
Keep less food in drawer.
Track that drawer slides on is dirty.
Clean drawer and track.
Ice storage bin is empty.
When the first supply of ice is dropped
into the bin, the dispenser should operate.
Freezer temperature is set too warm.
Turn the freezer control to a higher
setting so that ice cubes will be made.
When the first supply of ice is made,
the dispenser should operate.
Household water line valve is not open.
Open household water line valve and
allow sufficient time for ice to be made.
When ice is made, dispenser should
operate.
Refrigerator or freezer door is not closed.
Be sure both doors are closed.
Ice has melted and frozen around auger
due to infrequent use, temperature
fluctuations and/or power outrages.
Remove ice storage bin, and thaw and
the contents. Clean bin, wipe dry and
replace in proper position.
When new ice is made, dispenser should
operate.
Ice cubes are jammed between the ice
maker arm and back of the bin.
Remove the ice cubes that are jamming
the dispenser.
Opening/Closing of
doors/Drawers
Drawers are
difficult to move.
Dispenser
Dispenser will not
dispense ice
Ice dispenser
is jammed.
20 Ice cubes are frozen together.
Use the dispenser often so that cubes do
not freeze together.
Care and maintenance
Occurrence
Possible cause
Ice dispenser
is jammed.
Ice cubes that have been purchased or
made in some other way have been
used in the dispenser.
Only the ice cubes made by the ice maker
should be used with the dispenser.
Dispenser will
not dispense
water.
Household water line valve is not open.
See problem “Ice maker is not making
any ice.”
Open household water line valve.
Refrigerator or freezer door is not closed.
Be sure both doors are closed.
Water has been in the tank for too long.
Draw and discard 7 glasses of water
to freshen the supply. Draw and discard
an additional 7 glasses to completely rinse
out tank.
Unit not properly connected to cold
water line.
Connect unit to cold water line which
supplies water to kitchen faucet.
Water has an
odd taste
and/or odor.
Solution
This sound is normally made when automatically made ice is dropped into ice storage
bin. Volume may vary according to refrigerator’s location.
Sound of ice
dropping
This sound is normally made when ice maker is supplied with water after dropping
the automatically made ice.
Sound of water
supply
Other
Please thoroughly read ‘Automatic ice maker and dispenser’ in this manual.
Lights do not work
21
The power supply cord is unplugged.
Firmly plug the cord into a live outlet with
proper voltage.
Light bulb is loose in the socket.
Turn the refrigerator control to the OFF
position and unplug the refrigerator. Gently
remove the bulb and reinsert. Then plug in
refrigerator and reset the refrigerator control.
Light bulb has burned out.
Replace with an appliance bulb of the same
wattage, size and shape available at your
local hardware store. (See the ‘How to
dismantle parts’ section.) Turn the
temperature control to the OFF position and
unplug the refrigerator prior to replacement.
Door is left open for seven continuous
minutes.
Shutting door for one second will light bulbs
to come back on.
For any Suggestion, Opinion & Complaints,
Within UAE please Call 800 54 (LG)
Out side UAE please contact to our local dealer or log
into www.lg.com
LG Customer Information Center
LG Twin Tower, 20, Yoido-Dong,
Youngdungpo-Gu, Seoul, 150-721, Korea.
Printed in Korea
Download PDF