LG | V-C7070CT | LG V-C7070CT Owner’s Manual

ぇそくきげかko
Model
ずじぇununぇじ
ぉげかぐきしが
Language
ow
Page
Color(cover/body)
pmp
ownhptn
Material
せどねにぬへ onnに
Size(W*H)
Date
pnnsmoompr
Designer
Part No.
Chage
No.
1
2
3
4
5
6
7
8
9
qvpvおきpvqqぉ
せぅげかぎきぅげ
けぅげすぅぐjこせげぉざし
Description
Record
Change
content
ぇがぅげかぉ ぇこげじぉげじ
ECO No.
Date
ぅずじきsntron nsloolpr
Designer
ほづひにのねづひ
Confirm
ぇそじ
Table of contents
Information for your
How to
use
the
cleaner
cleaning
Operation
Adjusting
How to
...........................................................................................
head and
the dust chamber
Emptying
Accessory
the power level
plug
in and
use
...................................................................................
......................................................................................
....................................................................................................
the motor filter / Air Cleaner
Cleaning
the dust chamber
Cleaning
the exhaust filter
Cleaning
...................................................................
..................................................................................
...................................................................................
guide
Features
....................................................
.................................................................................
Cleaning
User's
Nozzles
........................................................................................................
Park-System
for sani
punch
vacuum
nozzle
...................................................
.........................................................................................................
Vacuum Nozzle for
What to do if your
appliance
What to do when the suction
2
...............................................................................
.......................................................................................................
Assembling
Using
safety
Bedding
..................................................................
does not work
performance
...........................................................
reduces?
...............................................
3
4
4
6
8
9
9
9
9
10
11
11
12
12
14
16
16
Information for your
safety
Please read all the
following information, which contains important instructions for the safety, the use and the maintenance of the appliance.
appliance complies with the following EC Directives: -73/23/EEC, 93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not use the appliance If the mains lead is damaged or faulty.
If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard.
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
This
?
?
?
Important
for
users
in the UK.
The wires in the mains lead of this
BLUE-neutral
appliance
BROWN
-
are
coloured in accordance with the
following
code:
live
VERY IMPORTANT:
Neither wire is to be connected to the earth terminal of
a 3 pin plug. If a 13 amp plug is fitted, fit a 13 amp BS 1362 fuse.
If any other type of plug is used, protect with a 15 amp fuse at the distribution board.
For appliance which include a mains lead with a moulded-on plug, the moulded-on plug incorporates a fuse.
For replacement use a 13 amp BS 1362 fuse. Only ASTA approved or certified fuses should be used.
The fuse cover/carrier must be replaced in the event of changing the fuse. The plug must not be used if the fuse cover/carrier is lost.
A
replacement
cover
carrier must be obtained from authorized electrical
goods
retailers.
3
How to
Fit the
use Assembling
large cleaning
Cleaner
head onto the end of the tube.
2
1
Nozzle outlet
1
The 2
Push
position
telescopic
nozzle outlet.
4
head
tube into
2
Telescopic
Push
tube
telescopic
tube into hose
handle until catch clicks.
Attachment Point
3
Button
Head
Flexible Hose
3
Connecting
the flexible hose
Push the end of the head
into the attachment
To
remove
pull
on
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
the button situated
cleaner.
vacuum
on
the
head,
forward.
5
How to
use Using the cleaning
the accessory
Open
Fit the
cleaning
cover
and
pull
head and
Accessory
Nozzles
out accessory you want.
head onto the end of the tube.
1
2
3
1
Nozzle
Upholstery
Dusting
brush & Crevice Tool
frames, furniture outlines, books and other
mattresses, etc.
uneven
The thread collectors
Crevice Tool is for
to
pick
up
the threads and lint.
Dusting
Brush is for
3
Upholstery Nozzle is for
vacuuming upholstery,
help
6
2
Brush is for
vacuuming picture
objects.
vacuuming in those
normally inaccessible places i.e.
reaching cobwebs, or down the side of
Brush
a
sofa!
motor filter.
cleaning
(Air cleaner)
7
How to
use Emptying
the dust chamber
Button
Dust chamber
The dust chamber needs
full
by
emptying
MAX which is marked
on
when the dust is
the dust chamber.
?
Turn off the
?
Your
appliance and unplug it.
appliance is equipped with both the
dust chamber
and the motor filter.
Press the button of the
?
cover
and
into the tank mount until it will go
8
pull
the dust chamber forward.
Remove the dust chamber cap and empty the dust chamber.
To refit the dust chamber, push the dust chamber
no
further.
Operation
Hose handle
1
2
3
POWER CONTROL
OFF
AUTO
MIN
MAX
BOOSTER
Key pad
Cord reel button
Light
1
Adjusting
?
?
Adjust power with the power
control switch in the handle.
If you press the key that you want,
the light which is located on body is
on
?
the power level
In
2
How to
?
case
of auto, the power and light
by the amount of dust.
in and
3
use
Pull out the mains lead to
the desired
length
and
plug
Press
?
To
?
Depress
vacuum
cleaner.
For deposit after vacuuming, for
example to move a small piece of
to
the cord reel lever to
or a rug, use the Park system
support the flexible hose and
head.
Slide the hook attached to the large
cleaning head into the slot on the
rear of the appliance.
cleaning
-
stop it, press the key pad(OFF).
retract the power cord after
System
furniture
key pad(AUTO, MIN, MAX)
to start the
Park
?
into
the socket.
?
differently.
is controlled
plug
use.
9
User's
guide
for sani
punch
vacuum
How to
Features
This nozzle
The bottom
picks up
part can
even
be
dust inside
separated
through beating.
nozzle
use
Follow the directions below for proper
use.
to be cleaned.
Since the bottom does not stick to the
surface, vacuuming is easy.
Assembly
Connect the nozzle to the
telescopic
tube.
Use
Set the suction power control switch to MAX POWER before vacuuming.
to the type of bedding, handling may be awkward or it may cause
According
If this
case
If the
punch
occur,
adjust
a
lower
a
lot of noise.
setting.
bar does not move, lift the nozzle slightly off the surface.
even after doing so, check if the suction power is too low
If it dose not move,
12
the sunction power control switch to
or
if the nozzle base is
clogged
with
a
foreign object.
This Sani Punch nozzle is for effective
Effective
cleaning
of beds and blankets to
remove
mites and dust.
cleaning
Bed & blanket
Bulky
When
using
on
Lay
out the blanket
and
vacuum
it
on
the bed
the bed
&
heavy
When
blanket
Light
using
on
It is easier to clean
by pushing
blanket & sheet
the floor
light
blanket
or
sheet
the nozzle to the direction of the
arrow.
To increase
lay
on
cleaning efficiency for light blankets,
top of a bulky blanket and then clean.
13
User's
For
guide for sani punch vacuum nozzle Cleaning Vacuum Nozzle for Bedding
simple cleaning
of the
vacuum
and attach the crevice tool to
Top
nozzle, detach the Sani Punch nozzle from the telescopic tube
vacuum
dust.
Bottom
Since the vibrator inside is
composed of precision parts, never disassemble the body.
foreign objects clog the air sunction part on top of the vacuum nozzle.
Since removal of the punch bar may cause performance problems, do not warp or remove it.
Attach the bottom plate properly before using. Without this bottom plate, it may not function.
Be careful not to let
Since this
vacuum nozzle has been made exclusively for cleaning beds, blankets and upholstery,
only for these cleaning purposes.
(Using it to clean the floor may result soiling it or drop in performance, do not use it for such purposes.)
use
14
it
Follow the instruction below for
not soak the entire
(Do
body
through washing.
of the
vacuum
nozzle in water, it may
cause
the vibrator to
malfunction)
Bottom
1
2
plate
3
Punch bar
Bottom
4
plate
6
5
Punch bar
1
Press the button
rear
side of the
nozzle to
bottom
on
2
the
Wipe
of the
vacuum
separate the
body
all the soiled
vacuum
with
a
parts
3
nozzle
Wash the removed bottom
plate
with water and
dry
it.
cloth.
plate.
4
Straighten
on
the
punch
the lower section.
bar
5
Insert the attachment
projections on bottom
plate to the vacuum nozzle
6
Push down the tabs
to
secure.
grooves.
15
What to do if your
Check that the
appliance
is
appliance
correctly plugged
in and that the electrical socket is
What to do when the suction
the
appliance
and
unplug
does not work
working.
performance reduces?
it.
?
Stop
?
Check that the
?
Check that the dust chamber is not full.
?
Check that the
?
Check that the exhaust filter is not blocked.
tubes, flexible hose and cleaning tool.
light
is not
on
Empty if necessary.
because of motor filter's blockage.
Clean the filter.
.
WARNING!
If ti becomes necessary to replace the moulded-on
by being inserted into a wall socket.
shock hazard
16
plug, destroy the
defective
plug
so
that it cannot create
a
possible
Note
17
Note
18
P/No.: 3828FI2833E
Download PDF