LG | V-CP963STC | LG V-CP963STC Owner’s Manual

Model
Language
Page
Material
Date
Part No
V-CP943**/V-CP953**/V-CP963**/V-CP973** /V-CP983**/ VTCP943**/VTCP953**/VTCP963** /VTCP973** /VTCP983**
English / Arabic
17
Weight 100g
2006.07.03
38288I2001R
Color(cover/body) 1/1
Size(W*H)
150×220(mm)
Designer
geyang
Owners Manual
Description
Chage Record
No.
1
2
3
4
5
6
7
8
9
Change content
ECO No.
Date
Designer Confirm
V-CP943N***/S***
V-CP953N***/S***
V-CP963N***/S***
VTCP943N***/S***
VTCP953N***/S***
VTCP963N***/S***
P/No.: 38288I2001R
Basic Parts
2
1
5
3
6
8
7
Optional Parts
The different figure and quantity of the following
part depend on the different models which you
have bought.
2
5
2
6
3
3
Accessory
These specifications are subject to change according
to the agent / buyer's request.
9
10
11
2
1
15
4
6
5
16
3
9
26
7
8
10
14
12
13
9
17
18
19
22
20
21
25
24
23
27
29
28
-3-
11
32
31
30
33
33
32
34
32
35
32
35
32
21
35
-4-
Using the cleaning head and Accessory
Information for your safety
Nozzles
(depending on model)
Please read all the following information,
Fit the large cleaning head onto the end of
which contains important instructions for the
the tube.
safety, the use and the maintenance of the
appliance.
¥ The 2 position head(7) is equipped with a
pedal(8) which allows you to alter its
This appliance complies with the following EC
position according to the type of floor to be
Directives: -73/23/EEC, 93/68/EEC-Low
cleaned.
Voltage Directive-89/336EEC -EMC Directive.
Hard
floor
position(tiles,
parquet
Never allow children to use the appliance
floors...). Press on the pedal to lower the
unsupervised.
brush.
Carpet or rug position. Press on the
Do not use the appliance If the supply
pedal to lift the brush up.
cord is damaged or faulty.
If the mains lead is damaged, it must be
¥ Crevice Tool(9)
replaced by an approved LG Electronics
For vacuuming in those normally inaccess-
Service Agent in order to avoid a hazard.
ible places i.e. reaching cobwebs, or down
the side of a sofa!
Always switch the vaccum cleaner off
before :
¥ Dusting brush(10)
¥ changing the dust bag.
For vacuuming picture frames furniture
¥ changing or cleaning the filters.
outlines, books and other uneven objects.
If no dustbag is inserted, the cover cannot
be closed. Please do not use force!
¥ Upholstery Nozzle(11)
For vacuuming uphostery, mattresses, etc.
Do not vacuum flammable or explosive
The thread collectors help to pick up the
substances(liquids or gases).
threads and fluff.
Do not vacuum hot ash, embers etc. nor
sharp objects.
How to plug in and use
Do not vacuum water or other liquids.
Pull out the supply cord to the desired
length and plug into the socket.
Press button (14) to start the vacuum cleaner.
To stop it press the button (14) again.
How to Use
Adjusting the power level
Connecting the flexible hose
Push the end of the head(1) on the flexible
¥ If your appliance is equipped with an
electronic variable power control(13), you
hose (2) into the attachment point on the
can choose the power appropriated for the
vacuum cleaner.
task. The more you slide the button towards
To remove the flexible hose from the
vacuum cleaner, press on the button (3)
situated on the head, then pull upwards.
the right, the greater the suction power.
¥ The flexible hose handle(15) has a manual
air flow regulator (16) which allows you to
Assembling the tubes
briefly reduce the suction level.
(depending on model)
Storage(17)
¥ Metal(or Plastic) Pipe(4)
- Fit together the two tubes by twisting
slightly.
¥Telescopic tube(5)
- Push spring latch(6) forward.
- Pull out tube to required length.
- Release spring latch to lock.
When you have switched off and unplugged
the appliance, press on the button (12) to
automatically rewind the cord.
You can move or store your appliance in a
vertical position by sliding the hook on the
large cleaning head into the clip on the
underside of the appliance.
-5-
Hard floor Nozzle(26)
Efficient cleaning of hard floors
(wood, linoleum,etc.)
-6-
CLEANING THE DUST TANK AND
FILTER ASSEMBLY
HOW TO FIT THE BAG MOUNT
AND THE DUST BAG
For best cleaning results, the dust tank
should be cleaned often.
1.Unplug cord from wall outlet.
2. Pull lid release out and up, then lift filter
cover.
3. Pull the dust tank assembly (30) up.
4. Push the release lever (31) of the filter
assembly (32) and pull it out of the dust
tank (33).
5. Wash the dust tank with sponge or soft
cloth under cold running water.
6. Brush (34) is for cleaning the filter
assembly(32). It is on the back of the
filter assembly.
7. Pull the filter supporter (35) down from the
filter assembly (32).
8.Clean the filter assembly (32) and the filter
supporter (35) with the brush under cold
running water.
Do not use detergent or wash in washing
machine or dishwasher.
9.Allow the filter assembly (32) and filter
supporter (35)to dry in shaded location for
a day.
Do not tumble or spin dry, nor microwave or
place in oven or in path of direct heat.
Ensure both the filter and filter supporter
are completely dry before placing it back into
the vacuum.
If you want to use a dust bag instead of
the dust tank, please:
1.Unplug cord from wall outlet.
2.Pull the cover release out and up, then
lift canister hood.
3.Pull the dust tank assembly (30) up.
4.Fit the bag mount (21) with the spring,
ensure the bosses on both sides of the
bag mount into the slots near the handle
on the base.
5.To fit a bag push the cardboard support
of a new bag into the bag mount until it
will go no further
-7-
MEMO
-8-
MEMO
-8-
-6-
-5-
32
31
30
33
33
32
34
32
35
32
35
32
21
35
-4-
2
1
15
4
6
5
16
3
9
26
7
8
10
14
12
13
9
17
18
19
22
20
21
25
24
23
27
29
28
-3-
11
2
1
5
3
6
8
7
2
5
2
6
3
3
9
10
11
V-CP943N***/S***
V-CP953N***/S***
V-CP963N***/S***
VTCP943N***/S***
VTCP953N***/S***
VTCP963N***/S***
P/No.: 38288I2001B
Download PDF