LG | DC595NWQ | LG DC595NWQ Owner’s Manual

DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DC595NWQ
PAL
Before
connecting, operating
or
adjusting this product,
carefully and
read this instruction booklet
please
completely.
Safety Precautions/Important
notes on
controlling
WARNING
Notes
RISK OF ELECTRIC SHOCK
DO NOT OPEN
copyrights:
It is forbidden
by law to copy, broadcast, show, broadcast
via cable, play in public, or rent copyright material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
on
this unit
(OR BACK)
discs.
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
This
product incorporates copyright protection technology that
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
is
SERIAL NUMBER: The serial number is found
the back of
on
this unit. This number is
The exclamation mark within
is intended to alert the
user
an
equilateral triangle
to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
Features:
Complete versatility
Tapes.
?
Watch
CLASSE 1 PRODUIT
with
To
Digital Video Disc Player employs
a
Laser
System.
proper use of this product, please read this owner's
carefully and retain for future reference, should the unit
ensure
manual
require maintenance, contact
see service procedure.
Use of controls,
other than those
an
authorized service location-
adjustments or the performance of procedures
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
as
vases, shall be
placed
on
VHS
TV show to the VCR.
a
(unless
DVD is copy
protected
Macrovision).
Important
notes on
controlling
this
unit
This unit
uses one
set of controls to
operate both DVD
and VCR. The
following buttons are helpful
successfully controlling each part.
1
2
in
POWER Button
Press the POWER button
front
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such
recording
or
Hi-Fi Stereo VCR.
?
This
play DVD, VCDs, audio CDs
Records from DVD to VHS
?
LASER
CAUTION:
DVD while
a
to
Remote controls both DVD and VCR decks.
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
___________________________________
___________________________________
?
?
CLASS 1
KLASSE 1
panel
on
the remote control
or
to turn on this unit.
DVD Button
Press DVD button
on
the remote control when you
want to control the DVD.
The DVD indicator will
the apparatus.
display
3
light
on
the front
panel
to show that the DVD is selected.
VHS Button
Press the VHS button
on
the remote control when
you want to control the VCR.
The VHS indicator will light on the front
display
panel
to show that the VCR is selected.
DVD/VCR
Toggle
4 Press the DVD/VHS
SELECT button
panel
to
toggle
on
the front
control between the DVD and the
VCR.
OUTPUT SELECT Button
5 Select
TV
2
to
one
screen.
of your output
sources
to view on the
Contents
Introduction
SafetyPrecautions.........................2
2
Important notes on controlling this unit
.
.
.
.
.
.
Operation withAudioCDandMP3Discs.
PlayinganAudioCDandMP3Discs.
.26
.26
Pause.............................26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
TableofContents..........................3
BeforeUse..............................4-5
MovingtoanotherTrack...............26
RepeatTrack/All/Off...................26
PlayableDiscs...........................4
Search.............................26
Precautions.............................5
NotesonDiscs..........................5
Random...........................26
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
3DSurround........................26
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
RepeatA-B.........................26
.26
ChangingtheAudioChannel.
ProgrammedPlayback.....................27
Programmed Playback with Audio CD
.
.
.
.
.
.
.
.
.
.
andMP3Discs............................27
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
UsingyourVCRveryfirsttime.
.11
TuninginavideochannelonyourTV.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
Howtousingthemainmenu...............13
.13
TuninginTVstationsAutomatically
.14
TuninginTVstationsManually.
.15
ChangingtheotherofTVstations.
DeletingTVstations......................15
.16-19
BeforeOperation-DVDpart.
GeneralExplanation......................16
On-ScreenDisplay.......................16
InitialSettings........................17-19
17
Initial Settings General Operation.
Language..........................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................17
Sound.............................18
Others(DRC/Vocal/PBC)...............18
ParentalControl......................19
Operation
OperationwithTape.....................20-22
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
.20
OPR(OptimumPictureResponse).
.21
InstantTimerRecording(ITR).
22
Timer recording using On Screen Display.
.23-25
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.27
ProgrammedPlaybackwithVideoCD.
.27
RepeatProgrammedTracks
.27
ErasingaTrackfromProgramlist.
27
Erasing the Complete Program list.
.28-29
AdditionalOperation-VCRpart.
OnScreenDisplay.......................28
TapeCounterMemoryStop................28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ScreenSaver...........................30
NotesonMP3Discs.....................30
SpecialRecording.........................31
CopyingfromDVDtoVCR.................31
31
Recording from another video recorder
.
.
.
.
.
.
.
Reference
Troubleshooting..........................32
SpeakerSettings..........................33
LanguageCodeList.......................34
CountryCodelist.........................35
Specification.............................36
About the
symbols
for instructions
Indicates hazards likely to cause harm to the unit
itself or other material damage.
special operating
Indicates
tips
.
.
VideoModeSetting......................30
Indicates
.
.
ChildLock.............................28
MovingtoanotherTITLE...............23
23
Moving to another CHAPTER/TRACK
.
.
.
.28
VideoDoctor(Self-Diagnosis).
ez(easy)repeat.........................28
Hi-FiStereoSoundSystem................29
.29
WideScreenCompatibility16:9.
.30
AdditionalOperation-DVDpart.
LastConditionMemory...................30
GeneralFeatures........................23
.
.
.
and hints for
features of this unit.
making
the task easier.
.
SlowMotion.........................23
24
Still Picture and Frame-by-Frame Playback
Search.............................24
Random...........................24
.
.
.
.
Repeat............................24
RepeatA-B.........................24
TimeSearch........................24
3DSurround........................24
Zoom..............................25
MarkerSearch.......................25
SpecialDVDFeatures....................25
TitleMenu..........................25
DiscMenu..........................25
CameraAngle.......................25
.25
ChangingtheAudioLanguage.
.
.
.
.
.
.
.
.
.
Subtitles...........................25
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
The main film content
(8cm/12cmdisc)
or
(VCD)
(8cm/12cmdisc)
Chapter (DVD only)
Sections of a picture
Audio CD
(8cm/12cmdisc)
In addition, this unit
can
or
play
a
CD-R
or
Depending
CD-RW that
MP3 files.
on
discs cannot be
--
The unit cannot
no
data,
or
itself,
recording equip-
some
played on the unit.
play the CD-R/RW
feature content
or a
musical
piece
that
are
smaller
A title is
composed of one or several chapters. Each
assigned a chapter number, enable you to
locate the chapter you want. Depending on the disc, no
chapters may be recorded.
is
chapter
the conditions of the
ment or the CD-R/RW disc
accompanying
than titles.
Notes
--
or
additional feature content, or music album. Each title
is assigned a title reference number enabling you to
locate it easily.
Video CD
contains audio titles
(DVD only)
DVD
CD-R/RW
Track
(Video
Sections of
discs that contain
contain different kinds of formatted data
a
CD and audio CD
picture
or a
audio CD. Each track is
or an
enabling
only)
piece
assigned
musical
on a
a
video CD
track number,
you to locate the track you want.
other than MP3 and CD-DA data.
--
--
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
irregular shaped CDs (e.g., heart-shaped
octagonal). It may result in malfunctions.
Do not
or
use
Notes
Some
on
DVDs and Video CDs
playback operations
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
moving pictures
and still
you to locate the scene you want.
A scene is composed of one or several tracks.
of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content
some
Scene
On
designed by the software manufacturer,
playback features of the unit may not be avail-
or other functions may be added.
Refer also to the instructions applied with the DVDs and
able,
Video CDs. Some DVDs made for business purposes
may not be played on the unit.
Types
There
of video CDs
are
two
types of video CDs:
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
Video CDs
PBC
with the
system via
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
or
still
other
pictures
included in
the disc.
code of the DVD
player and DVDs
player is designed and manufactured
2
for playback of region "2" encoded DVD software. The region code on the labels of some DVD discs
indicates which type of player can play those discs. This
unit can play only DVD discs labeled "2" or "ALL". If you
try to play any other discs, the message "Check Regional
Regional
This DVD
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their
playback
4
is
prohibited by
area
limits.
equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
Video CDs not
Before Use
(Cont'd)
Storing
Precautions
After
the unit
Handling
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
The
the unit
When
setting
picture and sound of a nearby TV or radio may be
distorted during playback. In this case, position the unit
The
away from the TV or radio,
removing the disc.
To
keep
Do not
near
or
turn off the unit after
volatile
liquids,
contact with the unit for a
leave marks
such
as
on
long period
Cleaning
discs
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
lightly
solution. Do not
benzine,
light, as there may be a considerable temperature
increase inside the car.
insecticide spray,
To clean the cabinet
a
store the disc in its case.
the unit
Cleaning
Use
playing,
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
the surface clean
use
the unit. Do not leave rubber of
use a
discs
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such as alcohol,
thinner, as these might damage the surface
or
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
vinyl
use
About
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn down, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
Hold the disc
on
playback side of the disc.
by the edges so that fingerprints
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
VCD1.1
Do not touch the
get
on
Asection whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
MP3
Audio CDs.
MP3 disc.
5
INTRODUC
Front Panel and
Window
Display
Ta pe
Pause
Eject
PAUSE( /
)
playback temporarily / press repeatedly
for frame-by-frame playback.
STOP(A)
Stops playback.
Forward
Skip/Scan,
Fast-Forward
(
)
chapter/track.
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
Winds the tape forwards.
PLAY
DVD OPEN/CLOSE
Opens
or
)
closes the disc tray.
Disc
Insert
(
a
Starts
Reverse
Tray
Go to
disc here.
Skip/Scan,
beginning of
to
or
Rewind
(
)
chapter/track
PREVIOUS chapter/track.
current
Press and hold for two seconds for
POWER
reverse
Switches the unit to
ON
a
fast
search
Rewinds the tape.
OFF.
or
( G)
playback.
Tape Compartment
EJECT
OPEN/
CLOSE
VIDEO 2
COPY
POWER
L-AUDIO 2-R
REC/ITR
PROG.
DVD/VHS
Audio IN
PROG.
VCR Record
Channel
status of the unit.
Copy
Point the remote control here.
Button
Indicates current title number
Programmed playback
active
CHP/TRK
Indicates current
chapter or track number
engaged
recording is programmed or in progress
VCR's internal tuner is
A timer
Channel programme
VCR
MP3 MP3 disc inserted
recording
is
Indicates total
ANGLE active
Bilingual
Programme Selectors
Remote Sensor
Selector
DVD to VHS
TITLE
window
Shows the current
DVD/VHS
Jacks
(L/R)
Display
Indicator
Video IN Jack
engaged
playing time/elapsed
Child Lock is
mode
DVD to VHS copy is in progress
Indicates repeat mode
The Hi-Fi track of
CD Audio CD inserted
DVD
DVD inserted
VCD Video CD inserted
or
VHS
Cassette-In indicator
The VCR Record
video is
Speed
broadcast in stereo
or
AB
PROG. TITLE
CHP/TRK VCR
TIMER
REC
CDREC
HI-FI
ALL MP3
VCD
DVD
ST
6
a
tape is playing
The current TV
show
time
engaged
BIL
PR
SP
LP
LP
is set to SP
Remote Control
Selects
DVD/VHS select button
mode of remote
control.
OPEN/CLOSE
EJECT
Open or close the the disc tray.
operational
Switch this unit ON
-
POWER
or OFF.
TV/VCR
Switch between your TV's tuner and
the VCR's internal tuner.
OPEN/CLOSE
EJECT
POWER
TV/VCR
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or counter.
DVD
SETUP
/ i
SETUP/ i
setup
Display
the title
menu
DISC MENU
Select input
into tape.
SELECT
ENTER
AV
REC/ITR
Record your
REC/ITR
TITLE PAUSE/STEP STOP
?
menu.
TITLE
PLAY
)
input
for
recording
sources
into tape.
Forward SKIP/SCAN (
)/
Fast Forward
Search forward* / go to next
chapter or track.
FORWARD
-
PROGRAM
available.
(
source
-
BACKWARD
?
of the disc if
PAUSE/STEP
DVD disc.
SELECT/ENTER/OK
Acknowledge menu selection.
OK
Select an item in the menu
Select channel programme of VCR.
or remove
a
sources
AV
CLK/CNT
-
Access
DISC MENU
Access menu of
OUTPUT
SELECT
VHS
DISPLAY
FGDE(left/right/up/down)
-
Tape Eject.
-
OUTPUT SELECT
Select one of your output
to view on the TV screen.
-
*
?
CLEAR
playback temporarily / press
repeatedly for frame-by-frame
playback.
STOP(A)?
Stops playback.
Pause
?
Winds the tape forwards.
Press and hold button for about
two seconds.
PLAY
Starts
?
AUDIO SUBTITLE MARKER
-
SEARCH
(G)
playback.
Reverse SKIP/SCAN (
)/
Rewind
Search backward* / go to beginning
of current chapter or track or go
to previous chapter or track.
Rewinds the tape.
-
0-9 numerical buttons
Select numbered items in a menu.
AUDIO
Select
an
audio
an
C.LOCK ANGLE RETURN ZOOM
REPEAT RANDOM
?
A-B
-
language (DVD)
audio channel (CD).
or
ez
REPEAT CM SKIP
*
LP
Press and hold button for about
two seconds.
SUBTITLE
subtitle language.
?
Select
a
MARKER
Mark any
PROGRAM
Access or remove program menu.
CLEAR
Clear a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
point during playback.
-
SEARCH
MARKER SEARCH menu.
?
Display
ANGLE
Select DVD
camera
angle
-
?
if available
RETURN
?
REPEAT/ez REPEAT
-
?
-
Remove the setup menu.
Displays the menu of a video CD
with PBC.
-
-
?
all.
REPEAT
A-B/LP
-
-
CHILD LOCK
Switch the Child Lock on and off.
Repeat chapter, track, title,
ez
Repeat sequence.
Select the recording
speed
of the
tape.
?
RANDOM/CM SKIP
Play tracks in random order.
CM SKIP
-
-
?
ZOOM
Enlarge
Remote Control
Remote control
Operation Range
Point the remote control at the remote
sensor
and press
the buttons.
Distance: About 23 ft
Detach the
AAA AAA
(7 m)
from the front of the
image.
installation
battery
cover on
the
rear
of
the remote control, and insert two R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
battery
video
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
AUDIO OUT
Connect to
an
amplifier,
receiver
or
COMPONENT VIDEO OUT
Connect to
a
(Left/Right)
stereo
(Y
TV with Y Pb Pr
system.
Pb
Pr)
inputs.
COAXIAL
Connect to
(Digital audio out jack)
digital (coaxial) audio equipment.
AERIAL
Connect the aerial
this
using
jack.
VHS IN+OUT/DVD OUT
DVD EXCLUSIVE OUT
DIGITAL
AUDIO OUT
AERIAL
5.1CH AUDIO OUT
VIDEO OUT
AUDIO
OUT
Pr
R
COMPONENT
R
COAXIAL
L
RF.OUT
EURO AV1
AUDIO/
FRONT
REAR
CENTER
WOOFER
L
Pb
VIDEO
DVD/VHS
OUT
Y
VIDEO OUT
AC Power Cord
Connect to
a
power
source.
EURO AV1 AUDIO/VIDEO
Connect to your TV set
(VHS IN+OUT/DVD OUT)
or
another video recorder.
RF.OUT
Connect to your TV
using
this
jack.
5.1 CHANNEL AUDIO OUT
Connect to
--
a
5.1 channel receiver
center
--
speaker
front speakers
(surround) speakers
--
--
rear
connection
subwoofer connection
connections
connections
VIDEO OUT
Connect to
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
a
TV with video
inputs.
Connections
DVD exclusive out connection
Tips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the unit.
You
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
1
can
For better sound
reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
2
watch the DVD
Connect the VIDEO OUT
playback.
jack
this unit's DVD
on
EXCLUSIVE OUT to the video in
jack
on
the TV
the video cable.
using
best connections.
only
Connect the Left and
Right AUDIO OUT jacks
of
this unit's DVD EXCLUSIVE OUT to the audio left/
right
in
jacks
on
the TV
the audio cables.
using
Caution
--
directly to the TV.
input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Make
sure
this unit is connected
Set the TV to the correct video
--
Connecting
to a TV
Make
one of the following connections, depending
capabilities of your existing equipment.
When using the COMPONENT VIDEO OUT jacks,
on
the
Rear of this unit
(DVD
exclusive out
connection)
DVD EXCLUSIVE OUT
VHS IN+OUT/DVD OUT
DIGITAL
AUDIO OUT
5.1CH AUDIO OUT
COMPONENT
AUDIO
VIDEO OUT
OUT
Pr
R
AERIAL
set TV's INPUT to COMPONENT VIDEO.
R
COAXIAL
L
Basic connection
1
(AV)
of this unit to the RCA
a
REAR
Pb
CENTER
RONT
WOOFER
REAR
Y
L
VIDEO
input
on
socket
the
on
DVD/VHS
rear
OUT
VIDEO OUT
the TV
SCART to RCA lead.
Basic connection
1
FRONT
AUDIO/
Connect the EURO AV1 AUDIO/VIDEO
panel
using
RF.OUT
EURO AV1
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
COMPONENT VIDEO INPUT
VIDEO
INPUT
AUDIO INPUT
AERIAL
of this unit.
Pr
Connect the
2 RF.OUT jack
supplied
on
the
television's Antenna
Component
Video
Pb
Y
L
R
RF antenna cable from the
panel
Input.
rear
Rear of TV
of this unit to your
AUDIO
OUT(L)
AUDIO
OUT(R)
VIDEO OUT
(Color Stream ) connection
(for DVD)
1
Connect the COMPONENT VIDEO OUT
using
2
corresponding in jacks
optional Y Pb Pr cable.
the unit to the
an
Connect the Left and
the unit to the audio
using
on
jacks
on
the TV
VHS IN+OUT/DVD OUT
the audio cables.
DVD EXCLUSIVE OUT
DIGITAL
Right AUDIO OUT jacks of
left/right in jacks on the TV
AERIAL
5.1CH AUDIO OUT
AUDIO OUT
COMPONENT
AUDIO
VIDEO OUT
OUT
Pr
R
R
COAXIAL
L
EURO AV1
RF.OUT
FRONT
REAR
Pb
CENTER
WOOFER
Y
L
AUDIO/
VIDEO
DVD/VHS
OUT
Rear of this unit
VIDEO OUT
(Basic connection)
9
PREATION
Connections
Connecting
(Cont'd)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with
channel analog stereo or Dolby Surround
two
If the audio format of the
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
Connect the Left and
Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
--
--To
Connecting
digital
with two
to an
amplifier equipped
(PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
channel
1
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional coaxial audio cable.
You will need to activate this unit's
Digital
A
the audio format of the current DVD in the On-
Display,
press AUDIO.
stereo
Connect this unit's DIGITAL AUDIO OUT
2 (See "Digital
see
Screen
Audio
Output"
on
digital output.
18).
page
Multi-channel sound
digital multi-channel
quality. For this
connection
provides
the best
sound
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Analog
connection to
a
multi-channel A/V receiver
with 6 Channel connectors
(Dolby Digital, DTS)
This DVD
Player contains a multi-channel decoder. This
playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
enables
1
Connect the CENTER and WOOFER
Center
speaker
sponding in jacks
on
to the
3
the
corresponding
Connect the Left and
corresponding
in
corre-
your receiver.
Connect the Left and
2
for the
jacks
and the Subwoofer to the
Right FRONT speaker jacks
jacks on your receiver.
in
Right REAR speaker jacks
jacks on your receiver.
Sound
Make the
for
settings
Analog
4 Output andappropriate
the setup
Speaker Settings
in
menu.
See page 18.
Warning:
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
Rear of this unit
VHS IN+OUT/DVD OUT
selected.
DVD EXCLUSIVE OUT
DIGITAL
AERIAL
5.1CH AUDIO OUT
COMPONENT
AUDIO
VIDEO OUT
OUT
Pr
R
AUDIO OUT
R
COAXIAL
L
EURO AV1
RF.OUT
FRONT
AUDIO/
Rear of this unit
REAR
DVD/VHS
OUT
DVD EXCLUSIVE OUT
VHS IN+OUT/DVD OUT
DIGITAL
AERIAL
5.1CH AUDIO OUT
AUDIO OUT
COMPONENT
AUDIO
VIDEO OUT
OUT
CE
ER
WO
ER
R
P
COAXIAL
R
L
RF.OUT
EURO AV1
FRONT
REAR
Pb
WOOFER
Y
L
AUDIO/
VIDEO
DVD/VHS
CENTER
OUT
2 channel
analog
stereo or
Dolby Surround
DVD exclusive out
VIDEO OUT
connection.
Digital
multi-channel
connection
Center
Subwoofer
Front R
Rear R
Front L
Rear L
ANALOG 5.1CH
AUDIO INPUT
Amplifier (Receiver)
L
R
AUDIO INPUT
Amplifier (Receiver)
10
Pb
L
VIDEO
COAXIAL
DIGITAL INPUT
Y
VIDEO OU
to
Before
Operation
-
Using your VCR very
Following picture
will
display
VCR part
Store this channel
first time
on
the TV
4 You
you do not know how to do this.
screen
when you have just connected your video recorder
for the very first time.
tuning
3 to 4
shown "ACMS"
as
8 if you cannot obtain
carry out stages 5
4.
clear video playback as described in stages 1
5 Only
~
~
Select
TV stations,
To make
on your TV.
will need to look at the TV instruction book if
please follow stages
(see p.13).
TV channel number
a
Make
be
6
sure
that your VCR is in
the remote control
on
standby pressing
(only the clock will
displayed).
Press PROG. 3
more
or 4 on
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Pr-12
OKi
ACMS
which you wish to
watch video's.
POWER
ACMS
on
The
Tuning
in
a
video channel
on
your TV
screen.
Notes
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
is
Your TV receives
recorder
signals
the
7
1
Make
VCR
that you have correctly installed your
described earlier in this book.
Press POWER to turn
Turn
2
usually
on
on
or 4
to select another video channel.
can
ence
on
sure
as
Press PROG. 3
You may select any channel number between 22
and 68.
You
and tune it in
dedicated video channel built into it,
called AV.
i
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
SCART to RCA lead.
from the video
channel number
36
8
your TV
so that you may watch video
tapes. If you have used AUDIO and VIDEO
cables then your TV should already have a
a
CHANNEL
~
like another TV station. You
(VCR)
have to select
RF
PSET
R
8
Select
a
TV channel number
on
which you wish to
watch video's.
Press
POWER
on
the front of your VCR when
you have finished.
Tune this channel so that
appears.
Store this channel
on
a
bright
blue
screen
your TV.
your VCR.
your TV.
Notes
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play at
stage! If you switch your VCR on and continue
stages 3 4, instead of seeing video playback tune
Make
sure
VCR and
that you have correctly installed your
tuned in a dedicated video
successfully
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
channel
unable to view and record video
tapes!
this
~
your TV until you
3
see a
bright
blue
Tune this channel until the video
screen.
picture
is
sharp
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
optimum
video
playback
on
already pre-tuned
for
your TV.
11
PREATION
Before
Setting
Operation
the clock
-
VCR part
To set the colour
Manually
The clock in your VCR controls time and date
settings for your VCR.
1
Press i.
1
Press 1
or
2 to select TIME DATE.
Press OK.
--
:.
-
-
--
--
--
Press i.
2
The main
3
Press 1
or
Press 3
or 4
menu
---
.
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
4 system used.
HHMMDDMMYY
system
to select
according
to the COLOUR
12
TIME
DATE
2
i
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
REC
fOSD
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
day
of the week will appear
automatically
ON
OFF
AUTO
PAL
MESECAM
SYSTEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
16:9
4:3
OPR
when
Press 1
5 Press
you enter the year.
or
2 to select the RF AUDIO.
3 or 4 to
select
according
to the RF AUDIO
used.
HHMMDDMMYY
8
:.
0010102TUE
.
12
TIME
DATE
i
REC
fOS
ON
OFF
3
4
If you make a mistake press 1
correct details.
Press i.
12
or
RF I/I
RF B/G
RF D/K
4:3
E
SYSTEM
AB
C
OSD
VCR
Dr.
SYSTEM
i
OPR
2 and enter the
6
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation
-
VCR part
the main
using
Tuning
menu
This VCR
menus
The
can easily be programmed by using
displayed on screen.
menus are
the
controlled from the Remote
Control Handset.
1
by pressing
Press i button.
2 The main
If the TV broadcast
will appear
menu
on
the TV
screen.
Automatically
is weak your VCR may
signal
not detect the necessary information and will be
and to store them correctly. To overcome this problem
please
Switch on your TV set and video recorder
the POWER button.
in TV Stations
turn to the MANUAL TUNING section
on
page 14.
1
Press POWER to turn
your VCR.
on
Press i button.
2 The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
12
PSET
R
REC
Pr-12
TIME
DATE
ACMS
ON
OFF
REC
SYSTEM
AB
C
VCR
OSD
Dr.
NIC
fOSD
16:9
4:3
REC
OKi
OPR
12
Timer
recording setting (see p. 22).
PR SET Manual tuning setting (see p. 14).
ACMS ACMS (Automatic Channel Memory
System) (see p. 13).
TIME DATE Date & clock setting (see p. 12).
SYSTEM To set the Colour TV System
(see p. 12).
ABC OSD To change the language setting for
-
P
SET
R
REC
Pr-12
ACMS
ON
OFF
-
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
Pr-12
NIC
fOSD
16:9
4:3
ACMS
OPR
OKi
-
-
O
O
-
-
ACMS
OSD.
Pr-12
You
select the
OKi
ACMS
language among
English, Russian, Deutsch, Francais
can
and Polski.
O
Dr.
To check
-
a
O
O
p. 28).
F.OSD ON/OFF
problem
with your VCR
(see
16:9/4:3
O
OPR
O
NIC
-
-
-
-
To
display
the
3
Press OK
again
(see p.29).
To improve the playback picture
(see p. 20).
digital
or
sound
p.
29).
3
Press 1 and 2 to select the desired
4
Press "i" to return to
Press OK and press 3
a
or 4
TV
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
S
E
Pr-12
i
ACMS
deactivate the NICAM
(see
tuning
operational
mode of your VCR (see p. 28).
To select the aspect ratio of your TV
To activate
to start the automatic
process.
The TV STATION TABLE will appear when
menu.
to select.
4 is complete.
Press i to
save
your
tuning
settings.
picture.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
OKi
13
PREATION
Before
VCR part
-
in TV Stations
Tuning
In certain
Operation
areas
of the country broadcast
will
4 Searching
Press
Manually
stop when it locates
a
station.
2 to select MFT.
signals
Press 3
or 4
to
adjust.
may be too weak for your VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
manually
1
PR
CH
MFT
09
C10
00
in order for your VCR to store them.
CHANNEL/CABLE
Press i.
AV
:
PSET
R
The main
Press 1
STATION
will appear on the TV
2 to select the PR SET.
menu
or
i
screen.
Press 2 to select STATION
5 your
Press OK.
that you may
so
name
TV station.
Press OK.
12
REC
PSET
R
Pr-12
ACMS
ON
OFF
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
PSET
R
NIC
fOSD
16:9
4:3
PR
CH
MFT
C10
00
STATION
-
P
SET
R
OK i
OKi
OPR
6
01
PR
09
CH
MFT
STATION
C02
00
PR-01
Press 3
new
or 4
station
Press 1
or
to select letters and numbers for the
name.
2 to
move
back and forth between
characters.
CHANNEL/CABLE
:
Press OK.
AV
PSET
R
i
Press i.
2 The station table
Press 3
PR
or
will appear.
4 to select the programme number that
you want to tune
(for example,
PR
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
09).
7
Your
C02
C69, S01
(Standard stations)
or
S
11
14
S41.
required
15
station.
PR
CH
09
C--
MFT
STATION
--
----
CHANNEL/CABLE
PSET
R
10
13
to tune with the numbered buttons or use 3 or 4
14
manually
12
Enter the channel number of station that you want
to find the
OK i
placement.
now
been tuned into your
:
AV
i
tune other stations
-
09
-
FR2
TV station has
new
If you wish to
7.
(Cable stations):
-
STATION
00
VCR.
Press OK.
Press AV to select C
MFT
Press i, confirm the station
Press i again.
stages 1
3
CH
C10
PSET
R
OKi
,
C09
16
PSET
R
C10
FR2
00
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
OKi
repeat
Before
Operation
Changing
-
VCR part
the order of TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them against! The instructions
given on this page will show you how you can simply
move them into your desired order.
1
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
12
PSET
R
REC
12
PSET
R
REC
Pr-12
ACMS
TIME
DATE
SYSTEM
AB
C
VCR
OSD
Dr.
ON
OFF
16:9
4:3
16:9
4:3
SYSTEM
AB
C
VCR
OSD
Dr.
PSET
R
OKi
OPR
OKi
OPR
PR
PR
01
TIME
DATE
NIC
ON
OFF
PSET
R
NIC
fOSD
Pr-12
ACMS
fOSD
CH
MFT
STATION
C02
00
PR-01
01
CH
MFT
STATION
C02
00
PR-01
CHANNEL/CABLE
CHANNEL/CABLE
:
PSET
R
2
Press i.
Press 3
AV
i
Press i.
Press 3
or 4 to select the programme number
you want to delete. (for example, PR 03)
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
C05
00
PR-04
01
C02
00
PR-01
04
02
C03
00
PR-02
05
C06
00
PR-05
03
C04
00
PR-03
06
C07
00
PR-06
04
C05
00
PR-04
07
C08
00
05
C06
00
PR-05
08
C09
00
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
OKi
,
PR-08
MOVE
:
DELETE
:
OKi
,
C02
00
02
C03
00
PR-01
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
00
PR-05
06
C06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
3
Press 1.
After a short while, the selected station will be
deleted.
OKi
01
C02
00
02
C03
00
PR-02
03
00
PR-04
04
C05
C06
00
PR-05
05
C04
00
PR-03
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
to select the programme number
you want to move to (for example, PR 05).
or 4
DELETE
PSET
R
4
PR-01
PSET
R
4
2
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
:
P SET
R
i
PSET
R
3
AV
or 4
01
PREATION
screen.
:
:
,
OKi
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages 1 3.
-
OKi
Press OK.
The selected programme will be moved to the new
programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
01
C02
00
PR-01
02
C03
C06
00
03
00
PR-02
PR-03
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
MOVE:
PSET
R
DELETE
:
,
OKi
-
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
How to
selecting Stored
TV stations:
Stored TV stations can be selected in either of two ways.
Press PROG. 3 or 4 to select different stations that are
tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
OKi
15
Before
General
This manual
Operation
-
DVD
part
Temporary
Explanation
the basic instructions for
gives
operating
require specific operation or allow
only limited operation during playback. When this
occurs, the symbol
appears on the TV screen,
that
the
indicating
operation is not permitted by this unit
this unit. Some DVDs
or
is not available
On-Screen
The
TV
2
3
OFF
be
can
Press DISPLAY
during playback.
Press 3
select
an
highlighted.
Press 1
the
2 to
change
The number buttons
numbers
(e.g.,
Repeat Chapter
Repeat
Track
Repeat
All Tracks
Repeat
A-B
title
can
setting
of
an
For
Video CDs
(non-PBC
only)
Video CDs
only)
Repeat Off
Action
play
from this
prohibited
or
point
not available
some
press SELECT/ENTER to execute the
Some discs may not
Screen Display.
provide
all of the below On-
If no button is pressed
Display disappears.
for 10 seconds, the On-Screen
item.
be also be used for
number).
(non-PBC
Notes
item.
The selected item will be
or
Title
Resume
displayed on the
changed on the menu.
display operation
or 4 to
ALL
Repeat
status can be
Some items
On-screen
TRACK
AB
Display
general playback
screen.
1
the disc.
on
TITLE
CHAPT
Feedback Field Icons
setting
functions,
setting.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
1/3
Chapter
Number
1/12
Time search
Audio
language
Digital Audio
Output mode
0:16:57
1
ENG
and
Subtitle
language
Angle
6CH
OFF
1/1
Sound
VCD2.0
D
NORM.
Track Number
1/4
Time
Audio Channel
16
titles, and skips
Shows the current title number and total number of
to the desired title number.
1/2,or
Numbers, SELECT/ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
Numbers
,
SELECT/ENTER
Numbers
,
SELECT/ENTER
Shows the elapsed playing time, and
searches the point by the elapsed time directly.
1/2,or
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes the setting.
1/2
Shows the current subtitles language, and
changes the setting.
1/2
Shows the current angle number and total number of
angles, and changes the angle number.
1/2
Shows the current sound mode, and
changes the setting.
1/2
VCD1.1
Items
Sound
Selection Method
0:16:57
Function (Press 3/4 to select desired item)
Selection Method
Shows the current track number, total number of tracks
and PBC On mode, and skip to the desired track number.
1 /2,or
Numeric, SELECT/ENTER
Shows the elapsed playing time (Display only)
--
STER.
Shows the audio channel, and
changes the audio channel.
1/2
NORM.
Shows the current sound mode, and
changes the setting.
1/2
Before
Initial
You
-
DVD
General
Settings
part
Menu
Settings
set your own Personal Preferences on this unit.
can
Initial
1
Operation (Continued)
Select
you
Language
a
see
for the setup
language
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Disc Audio
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
code
Menu
5.1
PREATION
Italian
Code
Language
Digital
Audio
Output
Speaker Setup
Others
Spanish
Aspect
menu
Aspect
Menu
Country
This is the
Operation
Press SETUP.
The setup menu appears.
TV
menu.
when you press SETUP.
Italian
Language
Chinese
Polish
Digital
5.1
Audio
Output
Speaker Setup
Hungarian
Russian
Picture
Other--------
Others
TV
2
Press 3/4 to select the desired item.
The screen will show the current setting for the
selected item, as well as alternate setting(s).
While the desired item is selected, press 2, then
3/4 to select the desired setting.
3
Press SELECT/ENTER
4 selection.
Some items
Press
5 setup
to confirm your
additional steps.
require
SETUP, RETURN
or
nected.
Displays
a
standard 4:3 TV is
theatrical
images
picture.
above and below the
4:3 Panscan: Select when
a
with
Both
Displays pictures cropped to
sides of the picture are cut off.
16:9 Wide: Select when
a
masking
standard 4:3 TV is
nected.
fill your TV
con-
bars
conscreen.
16:9 wide TV is connected.
Disc Audio
4:3 Letterbox
Disc Subtitle
4:3 Panscan
Disc Menu
16:9 Wide
Country
TV
for the disc's Menu, Audio, and
Subtitle.
Language
Digital
5.1
Code
Aspect
Menu
DVD
language
a
4:3 Letterbox: Select when
Rating
Language
Select
DVD
PLAY to exit the
menu.
Language
Disc
Aspect
Audio
Output
Speaker Setup
Others
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 34. If you enter the wrong language
Original
Other
:
:
The
To select another
code, press CLEAR.
Original
Disc Audio
Disc Subtitle
English
Disc Menu
French
Rating
German
Country
TV
code
Spanish
Aspect
Menu
Italian
Language
Chinese
Polish
Digital
5.1
Audio
Output
Speaker Setup
Others
Hungarian
Russian
Other--------
17
Before
Operation (Continued)
-
DVD
Sound
Digital
Others
Audio
Output
Each DVD disc has
of audio output
variety
options.
player's Digital Audio Output according to the
Set the
part
a
type of audio system you
The DRC, Vocal and PBC settings can be changed.
Press 3/4 to select the desired item and press
SELECT/ENTER. The
changed
use.
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
PBC On
Disc Menu
Rating
Country
Dolby Digital decoder).
DTS decoder,
MPEG decoder.
or
with
TV
Dolby Digital
a
PCM: select when connected to
a
2-channel
the
on
MPEG2
or
digital
recording
sys-
With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
/PCM
and the
Code
Menu
Audio
audio
technology. However,
quietest ones). Then, you may
losing clarity
listen to
a
movie
of sound. Set
DRC to On for this effect.
Sample Freq.
48 KHz
Language
Digital
5.1
digital
at a lower volume without
Rating
Aspect
thanks to
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Disc Audio
Country
Output
Dynamic Range Control (DRC)
possible,
tem.
TV
Audio
Speaker Setup
Others
amplifier.
Dolby Digital, MPEG1,
Language
Digital
5.1
Code
Aspect
Menu
decoder
This unit outputs sounds in the PCM
2ch format when you play a DVD video disc recorded
stereo
Vocal On
Disc Subtitle
Stream/PCM: Select "Stream/PCM" if you connected
this unit's DIGITAL OUT jack to an amplifier or other
equipment
DRC On
Disc Audio
if you connected this unit's DIGITAL OUT jack to a
Dolby Digital decoder (or an amplifier or other equipment with a
of the selected item is
setting
between On and Off.
96KHz
Output
Vocal
Speaker Setup
Others
Sample Frequency
To
Speaker settings
DVD
Select speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 33.)
Disc Audio
Disc Subtitle
R
R
Disc Menu
Front L
Rating
Country
TV
Code
Volume
Size
Aspect
Menu
Language
Delay
Test
Digital
5.1
Audio
Output
Speaker Setup
Others
18
The karaoke channels
playing.
a
when
a
multi-channel karaoke
on
the disc will
normal stereo sound.
the
the desired
5.1
only
DVD is
mix into
Sample Frequency setting, first select
Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz
signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
made, this unit will pass each type of signal through
without any further processing.
change
Set Vocal to On
Return
0 dB
Small
ms
PBC
Set
Playback Control (PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
CDs.
to On or Off.
played according to the PBC.
played the same way as Audio
Before
Operation (Continued)
-
DVD
Parental Control
Rating
Code
Country
DVD
Enter the code of
DVD
Movies on DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
information that applies to the complete disc or to
certain
part
scenes on
the disc. These
scenes are
were
are
PREATION
Code Set
SA
Disc Subtitle
Disc Menu
Rating
Country
The Parental Control feature allows
country-dependent.
whose standards
country/area
Disc Audio
rated
from 1 to 8, and alternatively, more suitable scenes
available for selection on some discs. Ratings are
a
used to rate the DVD video disc, referring to the list
(See "Country Code List", page 35.).
TV
Menu
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Code
Aspect
Language
Digital
5.1
Audio
Output
Speaker Setup
Others
Disc Audio
8
Disc Subtitle
7
Disc Menu
6
Rating
TV
4
Aspect
Menu
1
5
Country
Code
Audio
Digital
Code
Country
using
the 3/4 buttons
While
2
Output
Unlock
Speaker Setup
3 of
on
left.
the 3/4 buttons.
the first character
1
Select
2
While
3
When you have not entered a password yet.
Enter a 4-digit password using the numbered but-
3
and
on
the
Setup
menu
using
the
buttons.
4
"Rating"
the
is selected, press 2.
1/2 buttons and select
cursor
3/4 buttons.
the second character
Press
tons to create a
to confirm
code
then
to exit the
menu.
personal 4-digit security password,
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
When you have already entered a password;
the code is
Enter
below
a
2.
Code is selected,
Country
press
2
step
"Rating"
3
Select
using
4
Shift
using
5
using
SELECT/ENTER
your country
6
selection,
press SETUP
Follow
Change
Others
"Rating"
on
menu.
3
Language
1
5.1
Select
the setup
4-digit password using the numbered butpersonal 4-digit security pass-
Note
Confirmation of the
4-digit password
changed (see "Changing
is necessary when
the 4-digit code"
).
tons to confirm the
4
word, then press SELECT/ENTER.
Changing
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
1
Follow
2
Enter the old code, then press SELECT/ENTER.
Select Change using the 3/4 buttons then press
Select
a
rating from 1
(1) has the
tons. One
Unlock: If you select Unlock, Parental Control is
not active. The disc will play in full.
Ratings
1 to 8: Some discs contain
suitable for children. If you set
er,
be
scenes
an
alternative
scene
is available
The alternative must have the
lower
one.
If
no
a
same
on
rating
the disc.
or a
suitable alternative is found,
play-
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
Press SELECT/ENTER to confirm your
5 selection,
then press SETUP to exit the
code
1-2 as shown above to the left
(Rating).
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
Enter
If you
If you
menu.
forget your 4-digit
forget
your
time and veri-
password,
code
to clear the current pass-
word, follow the procedure below.
1
Press SETUP to
2
Use the Number buttons to enter the
display
the setup
menu.
6-digit
number
"210499".
rating
menu.
Steps
4-digit
SELECT/ENTER.
4
not
rating for the playall disc scenes with the same rating or lower will
played. Higher rated scenes will not be played
unless
3
least
has the most
Eight (8)
using the 3/4 butplayback restrictions.
playback restrictions.
to 8
the
The
3
4-digit password is cleared.
Enter
a new
code
as
shown above to the left
(Rating).
19
with
Operation
Playing
You will
a
only
tape
be able to load and
eject video
You
cassettes
better
Getting
a
cassette is inserted and
picture
tracking
possible picture automatically. If the quality of the
recording is poor, repeatedly press 3 or 4 on the
remote control to manually adjust the tracking until
any distortions have been removed. Press numbered
0 on the remote control to switch automatic tracking
back
on
appear
1
VCR
that you have correctly connected your
described earlier in this book.
as
your TV.
Press POWER to turn
Turn
If distortions
can
them with D
or
in the
seen
picture,
reduce
playback.
Press EJECT.
If the end of the
tape is reached, your VCR will stop
the tape.
playback automatically, rewind, stop, eject
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
normal
on
be
E.
Press STOP to end
6
CM
sure
slow motion and shuttle, the noise bars may
on the picture according to the status of
tape.
again.
Make
still
reach the
can
During
playback started, the
function works to get the best
automatic
or
To switch off the slow motion and shuttle, press the
desired function.
tapes (on PAL TV).
When
:
picture press F or G.
following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
back
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
a
Shuttle
Slow motion
5 During playingplayback,
tape
playback.
your VCR.
Insert the video cassette into your VCR.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
The video cassette should have the window side
material).
Repeatedly
facing
up and the
on
arrow
facing
away from you.
press CM SKIP to
skip:
1 Press 30 seconds
2 Press 60 seconds
2
Press PLAY to start
playing
your tape.
video cassette which has had its
3 Press 90 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
AUTO TRACKING
Your VCR will
give
3
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
picture.
repeatedly to advance
the
be
paused for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
.
picture quality
pressing 3 or 4.
can
be
Press PLAY to continue
4 Picture search:
improved slightly by
playing
Picture
tape.
1
Press i.
2
Press 1
3
Press OK.
or
2 to select OPR.
your tape.
back press either FORWARD or
BACKWARD to this will enable you to rapidly wind
During playing
the tape (7 times normal
are on the tape.
Logic search:
During fast forwarding
playback)
see
OFF
SOFT
SHARP
R
f
ON
OFF
where you
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
20
Response)
automatically improves playback picture
quality by adjusting your VCR to the condition of the
slowed down at about 1/19 times the normal
Still
(Optimum
This feature
a
tape frame by frame.
If you hold down FORWARD, the picture will be
playback.
Tapes can
OPR
Press
3
4 SHARP.
or 4
16:9
4:3
12
12
MS
TIME
DATE
playing
5
a
VCR
OSD
Dr.
OPR
i
repeatedly
to select:
only
tape.
Press i return to
AB
C
OPR
Please note you may
or
SYSTEM
NIC
screen.
OFF, SOFT
set OPR when
or
Operation
with
Instant Timer
tape
Press LP if you wish to record in
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
5 Standard Play.
recordings using
SP will
a
Recording (ITR) start recording
for
a set period of time or until the
immediately
Your VCR
incorporates Long Play (LP)
time
record up to 180 minutes using Standard Play (SP);
using LP you will be able to record up to 360 minutes.
sound
1
quality
Make
VCR
when
slight
a
using
loss in
Insert
2 VCR.
your VCR.
video cassette with
a
protection
up and the
facing
arrow
facing
away from you.
Press
3 or 4 to select the programme number
wish
to record.
you
You may also directly select programme number
using the numbered buttons on the remote control.
If
from the SCART
wish to record
you
directly
4 RCA
sockets repeatedly press
you wish to record from is
AV 1 for
recording
or
AV until the socket
displayed.
recording
unwanted
scenes.
Press PAUSE/STEP to continue
recording.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
8
can
be
Press STOP to end
recording.
Press EJECT.
on
the TV
screen
for
a
few
seconds.
Notes
If you do not wish to record
on a tape (this can happen
quite easily by accident!) remove the protection tab on
the back edge of the video cassette.
It is possible to record on a video cassette with the
record protection tab removed by covering the hole
with self adhesive
tape.
Remember you can
watching another by
record
one
programme while
your instant recording,
TV
TV/VCR
to
select
mode
and then selecting a
press
different channel on your TV.
starting
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from VIDEO 2 and AUDIO 2
on
the
Press PAUSE/STEP to avoid
EJECT will appear
tab into your
The video cassette should have the window side
3
7
LP.
on
recording.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
and
picture
that you have correctly connected your
described earlier in this book.
Press POWER to turn
SP.
Press REC/ITR to start
sure
as
as
6 RECORD
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180 will
Please note there will be
produce improved picture and sound quality,
provide twice as much recording
will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
runs
or
however LP will
Instant Timer
video cassette
Long Play
(Left
&
rear
Right)
sockets
on
the front of your unit.
21
OPERATION
with
Operation
tape
Press the numbered buttons to enter the recording
start and end times of the programme that you wish
to record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times by
recording using On Screen
Display
Timer
You may set up to seven timer record events within
one month of the current date.
pressing
Note
or 4.
3
Before setting the timer make sure that you have set
the VCR clock correctly and you know which stations
you have tuned TV stations on your VCR.
PR
PR-01
video cassette with
Insert a
protection tab into your
VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
1
REC
PSET
R
Pr-12
ACMS
SYSTEM
OSD
Dr.
NIC
fOSD
ON
OFF
TIME
DATE
VCR
16:9
4:3
(SP, IP,
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
or
SP
SP
SP
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
DELETE:
SP
PR
SP
PR-01
SP
,
OK i
--
::
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
speed
DATE
TIME
16
19002000
::
SP
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
TIMER will appear in the display window while your
VCR waits to make the recording.
TIME
--
-~
i
Press 1 to delete the event.
DATE
-~
::
REC
--
-~
::
SP
replace.
--
SP
~
--
LP).
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
PR
SP
::
--
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
TIME
--
OKi
OPR
19002000
::
--
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
PR
AB
C
TIME
16
i
Press i.
Press 1 or 2 to select REC.
Press OK.
12
DATE
--
i
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then the
channel number; for example Stations 3 03. You
may also select Channels by pressing 3 or 4.
Once selected press 2.
If you wish to record from AUDIO 2 (L/R) and
VIDEO 2 on the front or from the EURO SCART
socket on the back of your unit, press AV to select
for correct display (AV1 or AV2).
-
-
PR
FR3
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
Weekly To record at the same time every week.
PR
DATE
TIME
--
PR-0116---
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
DLYSUMOTUWETHFRSA
--
--
--
::
--
-~
--
OK i
22
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme
1 is
programmed
to start at 16:00 and end
Programme
2 is
programmed
to start at 16:30 and end
at 17:00.
at 17:30.
(In
but
this case, Programme 1 will be recorded in its entirety,
only the last 30 minutes of Programme 2 will be
recorded.)
To watch
recording,
DVD while performing
press TV/VCR.
a
a
timer
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
DVD
VCD2.0
the TV and select the video
nected to the DVD
General Features
Note
VCD1.1
input
source con-
player.
features may also be available
Audio system: Turn on the audio system
and select the input source connected to the
DVD
Unless stated otherwise, all operations
described use the remote control. Some
Moving
player.
on
the
to another TITLE
Setup
menu.
DVD
1/3
1
Press OPEN/CLOSE to open the disc tray.
When
Load your chosen disc in the tray, with the label
2 facing up.
a
Press OPEN/CLOSE to close the tray.
appears on the TV screen, and
3 READING
starts
automatically.
If
playback
press PLAY.
In some cases, the disc
The
menu
playback
does not start,
might
is
When
displayed
may be displayed first after
Video CD which contains a menu.
loading
a
DVD
Use the 1 2
3
4
buttons to select the
title/chapter
view, then press SELECT/ENTER to start
you want to
playback.
Press TITLE
or
DISC MENU to return to the
title, you
one
to
can move
is
playback
stopped, then
(0-9) to
menu
a
title
1/12
on a
more
as
Press .
or
1/3
disc has
than
chapter/track
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
>
briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons
screen.
to another CHAPTER/TRACK
VCD1.1
disc has
a menu screen
or
Moving
DVD
appear
menu screen
DVD
than
more
follows:
as
press the appropriate numbered button
select a title number.
sure
instead.
If
disc has
Press DISPLAY when
double-sided DVD is inserted, make
the side you want to play is facing up.
When
a
another title
(0-9).
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the
Menu
setting
the
and the exact
menu screen.
operating procedures
for
menu
You also may set PBC to Off under setup. See page
18.
Notes
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
--
--Your
player
will not
different from your
player is 2 (two).
--To watch
a
recording,
(see
page 19).
region code.
on
performing
Slow Motion
1 Press .
The
player
a
rapid
or
VCD2.0
DVD
>
during
VCD1.1
pause.
will enter SLOW mode.
2 Use the .
or
> to select the
required speed:
1/16, t 1/8, t 1/4 or t 1/2 (backward),
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
or
t
T 1/16,
Note
Slow motion
play discs that have a region code
player. The region code for this
DVD while
press the buttons in
code must
be entered and/or the disc must be authorized
"Parental Control",
DVDs may have a
two-digit numbers,
succession.
may differ depending on the disc.
Follow the instructions on the each menu screen.
using
Note
For
playback
in
reverse
is not
applicable
for
Video CD.
timer
press TV/VCR.
23
OPERATION
with DVD and Video CD
Operation
General Features
Still Picture and
VCD2.0
DVD
The
1 To
Frame-by-frame playback
VCD1.1
1 Press PAUSE
2 You
Video CDs
(continued)
pressing PAUSE repeatedly
VCD2.0
DVD
1 Press and hold .
or
The
player
will
now
the remote control.
on
> for about two seconds
repeatedly
to select the
on
the TV
Tips
By pressing
playback, press RANDOM
disappears on the TV screen.
or
>
unit selects another title
until
Repeat
A-B
A*
To repeat
a
during Random playback, the
(track) and resumes Random
only
works with DVD Karaoke discs and
VCD1.1
OFF
sequence in
a
title:
1 Press A-B at your chosen
A- appears
briefly
2 Press A-B
again
the TV
on
starting point.
screen.
at your chosen end point.
on the TV screen, and the repeat sequence
begins (a-b repeat appears on the player's display).
briefly
Time Search
0:16:57
DVD
-:--:--
appears
on
during playback.
the
The
playing
on-screen
at
dis-
screen.
The Time Search box shows the
elapsed playing time of the
current disc.
2 Within 10 seconds, press 3/4 to select the Time
Search icon in the on-screen display.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
video CD without PBC.
onds from left to
DVD
VCD2.0
ALL
right
in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
VCD1.1
CHAPT
TRACK
screen.
The "-:--:--" appears in the Time Search box.
Note
Repeat
VCD2.0
DVD
AB
1 Press DISPLAY
playback.
This function
the TV
Video CD with PBC, you must set PBC to Off on the
menu to use the Repeat function. See page 18.
play
.
on
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
The Time Search function allows you to start
any chosen time on the disc.
screen.
2 To return to normal
"RANDOM"
a
3 To cancel the sequence, press A-B.
VCD1.1
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears
All icon appears
Repeat
A-B appears
1 Press RANDOM
The unit
a
setup
3 To exit SEARCH mode, press PLAY.
Karaoke DVD
screen.
Note
On
required speed: mX2, mX4, mX16, mX100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8 (backward) or MX2, MX4, MX8
(forward).
Random
the TV
repeat the disc currently playing, press REPEAT
The
VCD1.1
>
on
3 To exit
go into SEARCH mode.
or
Repeat Track icon appears
The
by
during playback.
2 Press and hold .
The
second time.
will now go into PAUSE mode.
advance the picture frame-by-frame
Search
repeat the track currently playing, press REPEAT.
2 To
during playback.
player
can
Repeat Track/All/Off
-
TITLE
4 Within 10
OFF
seconds, press SELECT/ENTER to confirm
the start time.
DVD Video Discs
1 To
-
Playback
Repeat Chapter/Title/Off
an
starts from the selected time on the disc. If you enter
playback will continue from the current point.
invalid time,
repeat the currently playing chapter, press
REPEAT.
The
2 To
Repeat Chapter icon appears
on
the TV
repeat the title currently playing, press REPEAT
Repeat Title icon appears
The
on
the TV
screen.
Repeat mode, press REPEAT a third time.
Repeat Off icon appears on the TV screen.
3 To exit
a
This unit
can
DVD
produce
a
3D SUR
3D Surround effect, which
playback from two
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
channel audio from
1 Press DISPLAY
a
3 Press 1/2
selected.
or
home theater system.
during playback.
2 Press 3/4 to select "NORM."
24
NORM.
simulates multi-channel audio
second time.
The
3D Surround
screen.
repeatedly
or
"3D SUR".
until the desired sound is
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
VCD1.1
during playback
or
still
playback
discs: Menus
to acti-
vate the Zoom function.
If you press ZOOM repeatedly, the
increases up to six times.
2 Use the 1 2
zoomed
3 4
move
the
through
resume
normal
playback
or
DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU.
Then, press the appropriate number button to select
option. Or, use the 1/2/3/4 buttons to highlight your
selection, then press SELECT/ENTER.
magnification level
picture.
3 Press CLEAR to
the
buttons to
return to
paused image.
1 Press TITLE.
If the current title has
screen.
zoom
The
zoom
function may not work for
function may not work on
some
2 The
DVDs.
3 To
nine
can
1
start
points
To enter
VCD2.0
playback
can
a
menu
may appear.
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
again.
DVD
1 Press DISC MENU.
memorized
point. Up
to
be memorized.
The disc
2 To
mark, follow these steps.
a
list
menu can
Disc Menu
from
menu, the menu will appear on the
VCD1.1
MARKER SEARCH
1/9
You
DVD
a
Otherwise, the disc
and subtitle
multi-angle
scenes.
Marker Search
an
DVD
Title Menu
Note
The
DVD
the contents of DVD Video
Checking
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
During disc playback, press MARKER when
playback reaches the spot that you want to
is
menu
Camera
displayed.
the disc menu, press DISC MENU
remove
Angle
DVD
again.
1/1
memorize.
The Marker icon will appear
2
Repeat step
on
the TV
If the disc contains
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
1
a
Marked Scene
disc
During
playback,
The MARKER SEARCH
recorded at different
camera
angles, you
change
angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
angle appears
on
the
a
display.
press SEARCH.
menu
will appear
on
2 Within 10 seconds, press 1/2 to select
ber that you want to recall.
a
the
screen.
Marker
will start from the Marked
Changing
num-
1
the Audio
Language
DVD
ENG
D
6CH
3 Press SELECT/ENTER.
Playback
scenes
to a different camera
can
Press AUDIO
scene.
4 To remove the MARKER SEARCH menu, press
ferent audio
repeatedly during playback
language or audio track.
to hear a dif-
SEARCH.
Subtitles
To clear
1
a
During
disc
playback,
The MARKER SEARCH
2
1
ENG
Press SUBTITLE
press SEARCH.
menu
will appear
on
the
different subtitle
screen.
repeatedly during playback
languages.
to see the
Press 1/2 to select the Marker number that you want
Note
to erase.
3
DVD
Marked Scene
Press CLEAR.
If
appears, the feature is not available
on
the disc.
The Marker number will be erased from the list.
4
Repeat steps
2 and 3 to erase additional Marker
numbers.
5
To
remove
the MARKER SEARCH menu, press
SEARCH.
25
OPERATION
with Audio CD and MP3 Discs
Operation
Playing
The DVD
Audio CD and MP3 discs
an
Player
CD-ROM, CD-R,
Before
Insert
recordings
on
CD-RW discs.
or
MP3
playing
Recordings on
MP3 formatted
play
can
read the notes
recordings,
MP3
on
page 30.
TRACK 2
TRACK 2.MP3
TRACK 3
TRACK 3.MP3
TRACK 4
TRACK 4.MP3
TRACK 5
TRACK 5.MP3
TRACK 6
TRACK 6.MP3
TRACK 7
TRACK 7.MP3
Clear All
STER.
The
player
will
3 Search
speed
2 Playback
1
To stop
track then press PLAY.
CD
1 Press PAUSE
2 To return to
elapsed playing
during playback
or
when
playback
edly
automatically begins
the
on
Random
Playback
and
menu screen.
until "RAND."
playback, press RANDOM repeatdisappears on the menu screen.
A-B
CD
To repeat a sequence.
1 During disc playback, press A-B at your chosen start-
MP3
during playback.
ing point.
press PLAY
or
press PAUSE
The
"A
Repeat icon and
-"
appears
on
the
menu screen.
2 Press A-B
to another Track
Press BACKWARD .
CD
MP3
FORWARD > briefly
during playback to go to the next track or to return to
the beginning of the current track.
Press . twice
briefly
or
to
step back
to the
previous
again at your chosen end point.
The Repeat icon and "A B" appears on the menu screen,
and the sequence begins to play repeatedly.
3 To exit the sequence and return to normal
A-B again.
The
Repeat icon and "OFF" appear
3D Surround
on
the
play,
press
menu screen.
CD
track.
In
of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
case
during playback.
Repeat Track/All/Off
1 To
2 To
CD
on a
can
produce
on
the
menu screen.
disc, press REPEAT
a sec-
a
3D Surround effect, which
playback from two
simulates multi-channel audio
conventional stereo
five
more
speakers, instead of the
speakers normally required to listen to
multi-
1 Press DISPLAY
Repeat Track icon appears
repeat all tracks
This unit
channel audio from
MP3
repeat the track currently playing, press REPEAT.
The
a
or
home theater system.
AUDIO
during playback.
2 Press 1/2 to select "NORM."
3 Press 3/4
selected.
or
repeatedly
or
"3D SUR".
until the desired sound is
ond time.
The
Repeat
3 To cancel
The
ALL icon appears
Repeat mode,
on
the
menu screen.
press REPEAT
Repeat OFF icon appears
on
the
a
third time.
menu screen.
Changing
Press AUDIO
the Audio Channel
CD
repeatedly during playback to hear a
(STEREO, LEFT, or RIGHT).
different audio channel
26
is
2 To return to normal
again.
Moving
the
time, press STOP.
at any other
playback,
on
CD
"RAND." appears
Repeat
Pause
indicated
stopped.
The unit
the current track's
playback
are
menu
time will appear on the display.
Playback will stop at the end of the disc.
3
MX2, MX4, MX8
OFF
starts.
During playback,
or
mode, press PLAY.
1 Press RANDOM
a
required speed: mX2,
and direction
4 To exit SEARCH
MP3
Press 3/4 to select
FORWARD >
Clear All
56:35
menu
or
menu screen.
TRACK 8.MP3
NORM.
FORWARD >
go into SEARCH mode.
now
to select the
Random
Audio CD
or
during playback.
(forward).
Program
TRACK 1.MP3
0:56:35
for about two seconds
mX4, mX8 (backward)
MP3
Program
TRACK 1
TRACK 8
1 Press and hold BACKWARD .
repeatedly
a
CD
CD
2 Press and hold BACKWARD .
disc and close the tray.
The menu appears on the TV screen.
1
Search
Programmed Playback
Programmed Playback
CD
VCD2.0
MP3
with Audio CD
Note
Program allows you to store your favorite
particular disc in the player memory.
contain 32 tracks
tracks for
On
a
The
menu
(Audio CD)
or
Insert Video CD and close the tray.
1
is
displayed
on
the TV
2
screen.
during playback or in
the Program Edit mode.
to enter
Video CD with PBC, you must set PBC to Off on the
menu to use the Program function. See page 18.
60 tracks
Press PROGRAM
2 mode
a
setup
Insert the disc and close the tray.
1
with Video CD
Programmed Playback
and MP3 Discs
Program can
(MP3 disc).
VCD1.1
Press PROGRAM while
The VCD
the stop
Program
menu
VCD
playback
is
stopped.
will appear.
Program
E
TRACK 1
TRACK 2
E
mark will appear to the right of the word
the right side of the menu screen.
The
on
Program
TRACK 3
TRACK 4
TRACK 5
TRACK 6
TRACK 7
Clear All
TRACK 8
Note
Press PROGRAM to exit the
mark will
disappear.
Note
Press 3/4 to select
3 SELECT/ENTER
the
E
Edit mode; the
Program
to
track, then press
place
the selected track
3 to
step
4 Repeat
Program list.
3
place
additional tracks
on
Program
MP3
TRACK 1.MP3
TRACK 8.MP3
TRACK 8
TRACK 2.MP3
TRACK 2.MP3
TRACK 3
TRACK 10
TRACK 3.MP3
TRACK 4.MP3
TRACK 4
TRACK 3
TRACK 4.MP3
TRACK 3.MP3
TRACK 5
Follow steps 3-7 of
The
STER.
Clear All
TRACK 8.MP3
NORM.
56:35
1
5
MP3
OFF
programmed track you selected last is highlighted
on
Press 3/4 to select the track you want to start
6 playing.
move
Press DISC MENU to
7
Repeat mode,
press REPEAT.
menu screen.
the
on
menu screen.
press REPEAT
Repeat Off icon appears
Erasing
the program list.
Press TITLE to
the
on
on
the
a
third time.
menu screen.
menu
Press 2.
The
currently playing,
All icon appears
Repeat
To cancel
The
menu
Tracks
Repeat Track icon appears
The
TRACK 7.MP3
Clear All
TRACK 8
with
left.
on
To repeat all tracks on the program list, press
REPEAT a second time.
TRACK 6.MP3
TRACK 7
menu.
"Programmed Playback
Audio CD and MP3 Disc"
To repeat the track
E
TRACK 5.MP3
TRACK 6
Program
the
Program
TRACK 12
TRACK 2
Audio CD
PROGRAM to exit the
Repeat Programmed
E
TRACK 1
0:00:14
or
on
list.
Program
CD
a
Press RETURN
to the next page.
move to the previous page.
Press PLAY to start.
a
Track from
1 Press PROGRAM
mode to enter the
E
The
Program
during playback or in
Program Edit mode.
the stop
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
in the order in which you programmed
the tracks and "PROG." appears on the display window.
List
Program list.
Playback begins
Playback stops after all of the tracks
have played once.
on
the
Program list
the
Erasing
1 Follow
List"
steps
as
Complete Program
1-2 of
"Erasing
a
List
Track from
Program
above.
2 Use 3/4 to select "Clear All", then press
SELECT/ENTER.
The
complete Program for the disc
The programs
To
resume
are
will be erased.
also cleared when the disc is removed.
normal
playback
from
programmed
playback
Press and hold PROGRAM for 3 seconds until "PROG."
indicator
disappears
in the
display
window.
27
OPERATION
Additional
On Screen
Operation
-
VCR part
Video Doctor
Display
Yo u may easily display the current time or tape counter,
amount of tape left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your VCR will appear on the TV screen. If a recording
is taking place these On Screen Displays will not be
recorded onto the tape.
(Self-Diagnosis)
This feature informs you that there is a problem with
error messages will appear on the TV
your VCR. These
screen.
1
Press i.
Press 1
or 2
to select Dr.
Press OK.
1
Press CLK/CNT to
Press CLK/CNT
display.
repeatedly
to
cycle through
the
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
12
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
2 Displays
will clear
counter and the amount of
tape left
the
on
PSET
R
Pr-12
ACMS
TIME
DATE
ON
OFF
SYSTEM
AB
C
OSD
VCR
VCR
Dr.
Dr.
NIC
fOSD
16:9
4:3
OKi
OPR
screen.
VCR
Press CLK/CNT
the TV
again
to remove all
displays
from
Dr.
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
OK
Tape Counter Memory Stop
The
Digital Tape
Counter
i
be displayed on the display
by pressing CLK/CNT on
Digital Tape Counter indicates
recordings on the tape.
can
window instead of the time
the remote control. The
the relative
positions
of
2
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
1
Press CLK/CNT.
TAPE STATUS
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
start
O
recording.
The tape counter will display the actual
hours, minutes and seconds.
play
Press STOP when
or
recording
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
O
2 Press BACKWARD.playback
NOT RECORDABLE:
Insert
time in
is
complete.
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
O
PR-01 26 10:00~11:00SP
Shows the current status of timer
recording.
Press i.
Child Lock
The control buttons on the front of the VCR can be
switched off so that your VCR can only be operated
using the remote control.
1
Press C.LOCK.
will appear in the display window.
None of the buttons on the front of your VCR will
work
(except STOP
If any buttons
on
and
EJECT).
the front of your unit
will flicker in the
display
are
window for
a
pressed
few
ez
(easy) repeat
By pressing & holding ez REPEAT during play back,
holding section is replayed twice automatically.
1
During play back, press
point where repeat play
Release
2
will
again to switch off the child
disappear in the display window.
reverse
point
search.
where repeat
play
holding
section is
replayed
twice
automatically.
lock.
Note
Pressing
ez
REPEAT
return to normal
28
REPEAT at the
to start.
The
Press C.LOCK
REPEAT at the
ez
ez
is to be concluded.
Then, your VCR will go into
2 is
seconds.
& hold
the
play.
again during repeat play,
will
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record
In addition it has
and
-
VCR part
Wide Screen
System
playback Hi-Fi stereo sound.
digital stereo sound
stereo NICAM
a
decoder.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on
your VCR will have a normal mono audio track and two
VHS Hi-Fi stereo audio tracks. These stereo tracks
allow you to make audio recordings in Hi-Fi stereo or
bilingual mode from a TV broadcast, stereo audio system,
video disc or another Hi-Fi VCR.
1
Your VCR's NICAM
digital
Yo ur VCR
16:9
Compatibility
record and
play back wide screen aspect
(16:9). To record a wide screen format programme successfully the correct type of wide
screen signal must be broadcast by the TV station.
can
ratio programmes
1
Switch
on
your VCR.
Press i.
Press F
or
G to select 16:9/4:3.
Press OK.
sound decoder allows
enjoy broadcasts with NICAM sound, as well
standard stereo, bilingual and mono sound.
you to
as
12
Pr-12
The
particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
STEREO NICAM
Sound is
and
automatically
recorded
the Hi-Fi stereo
on
REC
ON
OFF
on
the
mono
AB
C
VCR
OSD
Dr.
12
Pr-12
REC
16:9
4:3
or
E
the Hi-Fi
channel
(left)
track of the video
ON
OFF
repeatedly
on
repeatedly
3
The choice is STEREO, LEFT, RIGHT and MONO.
In BIL NICAM playback the primary language is
output on the left channel and the secondary channel is output simultaneously from the right channel
when audio output is set to STEREO. The primary
language will be output from both channels when
setting
OSD
VCR
Dr.
16:9
4:3
to select:
i
16:9
OPR
AUTO, 4:3
or
back Wide-Screen
Wide-Screen and Normal
programmes
4:3
as
normal.
and
recording
Normal format
playing back and recording Wide-Screen
recordings (16:9).
for
format
until the desired audio
mode appears.
is MONO.
Please note that when
AB
C
as
Only
separation.
2
the audio
AUTO
16:9:
the Hi-Fi tracks and the
track of the video tape without any
Press AUDIO
SYS
ACMS
4:3
16:9
4:3
programmes
Only for playing back
recordings (4:3).
MONO
The sound is recorded
PSET
R
fOSD
OKi
OPR
Automatically plays
on
tape.
mono
SYSTEM
AUTO:
Both audio channels will be recorded
will be recorded
TIME
DATE
Press D
tracks of the video tape.
BIL NICAM
primary language
ACMS
NIC
16:9
4:3
2 16:9.
mono
stereo tracks. The
PSET
R
fOSD
adjusting
the
tracking
control
12
REC
P
SET
R
Pr-12
ACMS
fOSD
ON
OFF
3
Press i to
16:9
4:3
remove
OPR
the
AUTO
AB
C
VCR
OSD
Dr.
4:3
16:9
menus
16:9
4:3
i
from the TV
screen.
enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART
To
to
RCA cable.
Hi-Fi stereo sound may revert to MONO.
29
OPERATION
Additional
Operation
Last Condition
DVD
This
CD
player
-
DVD
part
Notes
Memory
VCD1.1
memorizes the last condition for the last
An MP3 file is audio data
files that have the
The
player.
you switch off the
it.
player
before
commencing
to
play
Player
Video Mode
VCD2.0
means
A
change
displayed on the TV screen.
quality has improved. If not,
procedure until picture quality is
repeat the above
improved.
7.
MODE1
→
MODE2
MODE5
→
MODE1
→
→
MP3
use a new
8.
using CD-RW discs.
only.
names should be named using 8 letters
must incorporate the ".mp3" extension
File
Please
finished CD-R discs
e.g. "********.MP3".
Do not use special characters such
"_?!><+*}{`[@ ]:;\/.,"
etc.
Total number of files
on
or
less
as
the disc should be less than
200.
sequence:
MODE3
can-
playback
We do not recommend
and
9.
change
MP3 file in the 1st track, it
one.
6.
mode number selected is
Check whether the video
no
system.
MP3 files in the first
requires
playback
use
the video mode, press and hold DISPLAY
during disc playback. The new video
creates an ISO9660 file
session disc
MP3 files. If you wish to
files, format all the data in the disc or
not
about 3 seconds
Video mode
single
track. If there is
video mode.
To
-
Creator", which
playback picture may be flickon straight lines. That
interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
is
player
5.
VCD1.1
Dot Crawl is shown
Vertical
with this
4.
With certain discs, the
or
as
Sampling Frequency / only at 44.1kHz
Bit rate/ within 32 320kbps
CD-R physical format should be "ISO 9660"
If you record MP3 files using the software which
cannot create a FILE SYSTEM, for example "DirectCD" etc., it is impossible to playback MP3 files. We
therefore recommend that you use "Easy-CD
picture
DVD
".mp3".
follows:
3.
Setting
".mp3".
not read a fake MP3 file that has a
compatibility
appears when you leave the
in stop mode for about five minutes.
screen saver
ering
can
limited
1.
Screen Saver
DVD
player
file extension "MP3 files".
".mp3"
not read an MP3 file that has a file
MP3 Disc
2.
The
can
file extension
Notes
--
player
extension other than
The
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
compressed by using
MPEG1, the audio layer-3 file-coding scheme. We call
If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
--
MP3 Discs
About MP3
disc you have watched. Settings remain in memory
even if you remove the disc from the player or switch off
the
on
MODE4
→
If you turn off the the power, the video mode will be
back to initial state (MODE1).
10. Use 74 minute CD-R discs
minute CD-R
This DVD
(700M)
(650M),
do not
use
80
software.
player requires discs/recordings
to meet
certain technical standards in order to achieve
playback quality.
Pre-recorded DVDs
are
optimal
automatically
set to these standards. There are many different
of recordable disc formats
MP3
types
(including CD-R containing
files).
Customers should also note that
permission
is
required
in order to download MP3 files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright
30
owner.
Special Recording
Copying
from DVD To VCR
This unit allows you to copy the contents of
VHS tape with a press of the COPY button.
Recording
a
DVD to
a
recorder
With this video recorder you
an external source, such as
recorder
Note
If the DVD you
protected,
to copy is copy
not
be
able
to copy the disc.
you may
1
Insert Disc
2
Insert VHS
are
a
videotape
Press the COPY button
into the VCR deck.
from
camcorder.
Note
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
If the DVD disc
Play
the
menu
button
1
as
VCR A.
Tape
on
the unit front
panel.
on
the
to
begin copying.
panel
panel of
rear
of your unit
your unit.
or
the AV sockets
Insert the recorded tape into VCR A and
B.
2 tape into VCR
appears, you may need to
manually
VCR A should be connected to the SCART socket
the front
The DVD will go into Play mode and the VCR will
go into Record mode.
press the REC/ITR
VCR A.
3
To start
4
When you want to finish
on both video recorders.
recording,
and PLAY
on
on
a
on
blank
VCR B
Process
Stop
Copy
4 When
the
is finished playing, press the VHS
DVD
button
recordings
from another video
Tape
blank VHS
press the
make
In the
the DVD to VHS
3 Copy
or a
can
copying
attempting
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert
from another video
the remote control and then press the
STOP button to end the copy.
on
copying,
press the STOP
You must stop the Copy process manually when
the DVD movie ends, or the unit may replay and
record over and over again.
31
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
DVD
or
VCR do not
before
problem
a
service.
contacting
Cause
Symptom
work
of
DVD
or
Correction
VHS button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
picture.
signal
Select the
the TV
on
output.
player
No sound.
not start
does
player
playback.
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
are
not connected
properly.
securely.
The power of the equipment connected
with the audio cable is turned off.
the audio cable.
Digital Audio Output
position.
is set to the
The disc is dirty.
The TV channels
An
unplayable
are
not tuned in
properly.
placed
on
the
equipment
connected with
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
tuning again.
playable disc. (Check
type and Regional code.)
guide.
playback
Place the disc on the disc tray
inside the guide.
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
Is the cassette compartment
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
are
empty?
properly.
properly
the disc
a
Place the disc with the
down.
down.
within the
Clean the disc.
Check tuning, carry out
The disc is
Rating
jacks
Set the
Insert
disc is inserted.
placed upside
Turn
jacks
correct
Video tape cannot be
inserted.
recording
Connect the audio cable into the
securely.
The disc is not
does not work
screen.
The equipment connected with the
audio cable is not set to receive DVD
The disc is
The remote control
the TV
Connect the video cable into the
The
The DVD
on
securely.
wrong
is poor.
appears
securely.
The audio cables
picture
appropriate video input mode
the picture from the DVD
so
The video cable is not connected
signal output.
The
cord into the wall outlet
Eject
the batteries with
or
side
correctly
change
new ones.
the tape in.
Select "STEREO" by repeatedly
"AUDIO" on the remote control.
pressing
Make sure NICAM in the menu is set to
AUTO for the station to be recorded.
Video Head Cleaning
Dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken
up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes
might. Clean the video heads with a commercially available video heads cleaning tape.
32
Speaker Settings
Make the
following settings
for the built-in 5.1 channel
surround decoder.
Press 1 / 2 to customize the sound to confirm to the
acoustics of your room by adding a delay effect to
the Center Speaker and Rear (Surround) Speakers.
Disc Audio
Disc Subtitle
R
R
Disc Menu
Country
Volume
Code
0 dB
Size
Aspect
Menu
When 5.1 Channel Surround is
Front L
Rating
TV
Small
Delay
Language
ms
Test
Audio
Digital
5.1
Delay
Output
enjoy
played, you can
the best sound if the distance between you and
each
speaker
is the
You can set the Delay
(Surround) Speakers to cus-
same.
time in the Center/Rear
Return
tomize the sound to the acoustics of your
Speaker Setup
room.
Others
Select "5.1
1
Speaker Setup" using
tons on the
While "5.1
2 button.
setup
the 3/4 but-
(A)
L
menu.
R
C
Speaker Setup"
is selected, press 2
DC
DF
SW
Press 1/2 buttons to select the desired
3
4 Adjust options by using
speaker.
DS
SL
3/4/4/2 buttons.
SR
(B)
selection
Speaker
Select
a speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
ers
Note
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Setting
the
delay (Center Speaker)
equal to or longer than the DF
the below figure, set the mode as 0ms. Otherwise,
change the setting according to the table below.
(A)=DF-DC
Distance of (A)(cm)
Setting(ms)
If the distance of DC is
Volume
Press 1 / 2 to
adjust the output
speaker. (-10dB 0dB)
level of the selected
~
Setting
Size
34
1
68
2
102
3
136
4
170
5
the
delay (Rear (Surround) Speaker)
equal to the distance of DS in the
above, set the mode as 0ms. Otherwise, change the
setting according to the table below.
(B)=DF-DS
Distance of (B)(cm)
Setting(ms)
If the distance of Df is
Press 1 / 2 to set
a
mode.
(Large, Small
or
None)
If you have connected the system to a speaker with
a low frequency of 100Hz or below, select "Large."
If you have connected the system to a speaker withfrequency of 100Hz or below, select
out a low
170
5
"Small." If you have not connected a subwoofer,
always select "Large" for Front speaker (L/R).
340
10
510
15
When you do not have
select "None."
Front L/R
speaker's
a
size
certain
can
speaker connected,
be set to
"Large"
or
"Small."
If Front L/R
Center
speaker's
speaker's size
size is set to "Small," Rear and
can be set to "Small" or
"None."
Subwoofer's size
"None.
in
can
be set
only
to
"Large"
or
Test
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of
signals memorized in the system.
Front Left (L)
Front Right (R)
Center
Rear Left (L)
Rear Right (R)
→
→
test
→
→
Return
Press SELECT/ENTER to return to the
previous
menu.
33
REF NC
Language Code
Enter the
(See
appropriate
17).
List
code number for the initial
settings
"Disc Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
34
Country
Enter the
Code List
appropriate
code number for the initial
setting "Country Code" (See
page
19).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and Barbuda
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
El Salvador
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SV
BB
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Georgia
& S. Sandwich
(USA)
Mayen
Islands
Republic
Principe
French Southern
Territories
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape Verde
JP
Japan
PL
Poland
VI
Virgin Islands (British)
Virgin Islands (USA)
CX
Christmas Island
KE
Saint Pierre and
VN
Vietnam
Cyprus
KG
Kenya
Kyrgyzstan
PM
CY
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DE
Anguilla
Kingdom
Outlying
Islands
Miquelon
City State
Grenadines
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman Islands
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
Republic
(French)
35
REF NC
Specification
General
Power
requirements
AC 110-240V, 50/60 Hz
Power
consumption
23W
Dimensions
Mass
430 X 97.5 X 360
(approx.)
5.4
(approx.)
(w/h/d)
mm
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display tape
RF Modulator
UHF 22
68
-
(41˚F
to
95˚F)
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VHS)
Audio
Video
-6.0dBm,
-6.0dBm,
more
than 10 kohms
more
than 47 kohms
1.0
75 ohms, unbalanced
Vp-p,
(SCART)
(RCA)
(SCART/RCA)
Outputs (DVD)
VIDEO OUT
1
COMPONENT VIDEO OUT
Ω, negative sync., RCA jack
(Y)
(p-p),
V
0.7
(Pb)/(Pr)
(p-p), 75 Ω, RCA jack x 2
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(analog audio)
2.0 Vrms
Vp-p
75 ohms, sync
1.0 V
negative
75
(1 KHz,
0
dB),
330
x
1
Ω, RCA jack (L, R)x1/SCART (TO TV)
Outputs (VHS)
Audio
-6.0dBm, less than 1 kohms (SCART)
Video
1.0Vp-p,
Design
and
specifications
are
subject
to
change
75 ohms, unbalanced
without notice.
Manufactured under license from
Confidential unpublished works.
"DTS" and "DTS
36
Digital Out"
are
(SCART)
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
trademarks of
Digital Theater Systems,
Inc.
of
Dolby Laboratories.
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM
JEDDAH MAIN SERVICE CENTER P.O.BOX 704,
JEDDAH 21421 KINGDOM OF SAUDI ARABIA
02-629-2929
TEL)
THE MAINS POWER SUPPLY WHEN IT IS NOT IN
JEDDAH QUICK SERVICE CENTER
USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED
02-663-3888 EXT. 340,343
TEL)
TO RAIN OR MOISTURE.
RIYADH BRANCH SERVICE CENTER
01-461-5559
TEL)
CAUTION
AL KHOBAR BRANCH SERVICE CENTER
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
THE COVER. NO USER SERVICEABLE PARTS ARE
TEL) 03-857-2629/2637
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
WARNING
THE RECORDING AND PLAYBACK OF CERTAIN
MATERIAL MAY NOT BE DONE WITHOUT
If you pour a cold liquid into a glass, water vapor in the
air will condense on the surface of the glass. This is
moisture condensation. Moisture condensation
head drum,
PERMISSION.
cause
The
working life of this set is 7 years since the date of
delivery to consumer. Upon the expiry of the said period, it might be unsuitable for the use according to their
designation.
Please read these
precautions
on
the
of the most crucial parts of the unit, will
to the tape.
one
damage
When this set is
to a
exposed
rapid temperature change
from cold to warm, some condensation will occur. Under
this condition, connect the power cord to the AC line,
press POWER button
for the unit to dry out.
on
and allow at least two hours
before you operate this
unit.
?Avoid extreme heat, cold, moisture and dust.
?Avoid using near a magnetic field. (This will adversely
affect the units
?
a
volatile agent such
or a
?
?
?
case
is
wiped
with
benzene, alcohol, thinner, etc.
chemically processed cloth, the surface finish may
deteriorate
?
performance.)
Be careful when the surface of the
as
its coating may peel.
only in a horizontal position, and do not
place anything heavy on it.
Keep the unit away from flower vases, tubs, sinks, etc.
If any liquids should spill into unit, serious damage
could occur. In that case, please consult qualified
service personnel.
Do not obstruct the ventilation holes: they prevent
overheating. Even soft materials such as paper and
or
Use the unit
cloth may prevent proper ventilation of the unit.
There are no serviceable parts inside. For service,
please
contact your service centre.
?
It is
possible that the heads may
clogged when playing an old
or damaged tape. If the image on
your screen resembles the picture on
the left while playing back a tape, the
heads may require cleaning.
become
?To clean the heads, obtain a head
cleaning tape from your local video
dealer. Follows the instructions that
come
with the
excessive
cleaning tape,
use can
as
shorten head life.
P/NO
:
3834RP0080T
Download PDF