LG | DV7945P | LG DV7945P Owner’s Manual

DVD PLAYER
OWNER'S MANUAL
MODEL
:
DV7945P
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed by
Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
via cable,
a
risk of electric
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
to
___________________________________
___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
IMPORTANT SAFETY NOTICE
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
The cord
into the
reason
grip for
existing
the
plug
fitted to this
product
is built
power cord as supplied. If, for any
you need to shorten the cord.
DO NOT RE-USE THE PLUG.
A
CAUTION:
This
To
Digital
ensure
manual
Video Disc
proper
carefully
use
Player employs
of this
Laser
product, please
System.
read this owner's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
other than those
a
specified
authorized service location
the
performance
of
procedures
herein may result in hazardous radi-
ation exposure.
To
prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The
(dripping
as
vases,
2
apparatus should not be exposed to water
splashing) and no objects filled with liquids, such
should be placed on the apparatus.
or
new plug must be used to ensure your continued
safety by securing the plug to the power cord in
accordance with Plug & Socket Regulations 1994.
Table of Contents
Introduction
SafetyPrecautions.........................2
TableofContents..........................3
BeforeUse..............................4-5
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA Disc
NotesonMP3/WMARecordings.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18
18
.18
Pause.............................19
Precautions.............................5
MovingtoanotherTrack................19
RepeatTrack/All/Off..................19
NotesonDiscs..........................5
Search.............................19
PlayableDiscs...........................4
AboutSymbols..........................5
.6
FrontPanelandDisplayWindow.
.
.
.
.
.
.
.
.
.
.
.
.
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
BeforeOperation.......................11-14
GeneralExplanation......................11
On-ScreenDisplay.......................11
InitialSettings........................12-14
12
Initial Settings General Operation
Language..........................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Picture.............................12
Sound.............................13
Others.............................13
ParentalControl......................14
Random...........................19
RepeatA-B.........................19
3DSurround........................19
.19
ChangingtheAudioChannel.
OperationwithJPEGDisc...................20
ViewingaJPEGdisc.....................20
MovingtoanotherFile.................20
.
.
.
.
.
.
.
.
.
.
StillPicture.........................20
Toflipthepicture.....................20
Torotatepicture......................20
.20
NotesonJPEGRecordings.
ProgrammedPlayback.....................21
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
.
.
.
.
MP3/WMADisc.........................21
ProgrammedPlaybackwithVideoCD
RepeatProgrammedTracks.
ErasingaTrackfromProgramList.
ErasingtheCompleteProgramList.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.21
.21
.21
.21
AdditionalInformation......................22
LastConditionMemory...................22
ScreenSaver...........................22
Operation
.15-17
OperationwithDVDandVideoCD.
PlayingaDVDandVideoCD...............15
.
.
.
.
.
.
.
.
HDCDPlayback.........................22
SystemSelect..........................22
ControllingtheTV.......................22
GeneralFeatures........................15
MovingtoanotherTITLE...............15
15
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................15
Still Picture and
Frame-by-Frame Playback
.
16
SlowMotion.........................16
Random...........................16
Reference
Troubleshooting..........................23
SpeakerSettings..........................24
LanguageCodeList.......................25
CountryCodeList.........................26
Specifications............................27
Repeat............................16
RepeatA-B.........................16
TimeSearch........................16
About the
3DSurround........................16
symbols
Zoom..............................17
Indicates hazards
MarkerSearch.......................17
itself
SpecialDVDFeatures....................17
TitleMenu..........................17
DiscMenu..........................17
CameraAngle.......................17
.17
ChangingtheAudioLanguage.
.17
ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
or
for instructions
likely to cause
damage.
harm to the unit
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Subtitle............................17
3
INTRODUC
Before Use
Playable
Disc-related terms
Discs
Title
(DVD only)
DVD
The main film content
(8cm/12cmdisc)
or
accompanying
or
feature content
additional feature content, or music album.
Each title is assigned a title reference number
Video CD
(VCD)
(8cm/12cmdisc)
you to locate it
Audio CD
(8cm/12cmdisc)
In addition, this unit can play a HDCD, DVD-R,
DVD±RW, Kodak PICTURE CD, SVCD, and CD-R or
CD-RW that contains audio titles, MP3, WMA or JPEG
enabling
easily.
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
files.
Track
--
--
--
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD-R/±RW) disc itself,
some CD-R/RW (or DVD-R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Notes
(Video
Sections of
Notes
on
on
a
CD and audio CD
picture
audio CD. Each track is
or an
enabling
playback operations of DVDs and Video CDs may
intentionally fixed by software manufacturers. As this
unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playbe
back features of the unit may not be available
functions may be added.
Refer also to the instructions
supplied
or
other
with the DVDs
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
you to locate the track you want.
Scene
On
video CD with PBC
(Playback control) functions,
pictures are divided into sections called "Scenes". Each scene is displayed in the
menu screen and assigned a scene number, enabling
a
and still
moving pictures
you to locate the scene you want.
A scene is composed of one or several tracks.
Types
There
of video CDs
are
two
types of video CDs:
Video CDs
PBC
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
code of the DVD
player
and DVDs
2
player is designed and manufactured
playback of region "2" encoded DVD software.
The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit
can play only DVD discs labeled "2" or "ALL". If you try to
play any other discs, the message "Check Regional
This DVD
for
Code" will appear on the TV screen. Some DVD discs
may not have a region code label even though their play-
prohibited by
area
limits.
menus, search
functions,
typical computer-like operations. Moreover,
of high resolution can be played if they are
equipped
other
pictures
included in
with PBC
(Version 1.1)
Operated
way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
in the
HDCD
(High
same
Definition
Compatible Digital )
HDCD
(High Definition Compatible Digital ) is a
recording system that has improved audio CD sound
dynamic range, sound field reproducibility and vocal
acoustics.
This DVD
player
is
equipped
with
an
HDCD decoder.
The HDCD indicator illuminates when
HDCD-encoded audio CD.
4
or
still
the disc.
Video CDs not
back is
only)
piece on a video CD
assigned a track number,
musical
DVDs and Video CDs
Some
Regional
or a
playing
an
in
Before Use
(Continued)
Precautions
Storing
After
the unit
Handling
discs
playing,
store the disc in its
case.
When
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
The
light,
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
or
radio,
or
turn off the
volatile
liquids,
such
as
the unit. Do not leave rubber
leave marks
on
a
long period
ter out.
plastic products in
of time. They will
the surface.
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
Fingerprints and dust on the disc can cause poor picquality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the centure
insecticide spray,
or
To clean the cabinet
a
discs
the unit
Cleaning
use a
Cleaning
temperature
the exterior surfaces clean
use
contact with the unit for
Use
as there may be a considerable
increase inside the car.
use
thinner,
or
are
moistened with
lightly
strong
as
a
extremely dirty,
mild detergent
solvents such
these
as
might damage
alcohol,
the surface
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
About
records.
vinyl
Symbols
of the unit.
About the
To obtain
clear
picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
a
"
may appear on the TV
This icon means the function
manual is not available
About the disc
on
Discs
DVD
VCD2.0
Handling
on
playback side of the disc.
by the edges so that fingerprints
VCD1.1
Do not touch the
get
the surface.
Do not stick paper
during operation.
explained in this owner's
that specific DVD video disc.
symbols
screen
for instructions
of the following symbol is
represented by the symbol.
one
to the disc
DVD
Video CDs with the PBC
(playback control)
function.
discs
Hold the disc
on
A section whose title has
applicable only
Notes
symbol display
"
or
tape
on
the disc.
Video CDs without the PBC
(playback control)
function.
will not
CD
Audio CDs.
MP3
MP3 disc.
WMA
WMA disc.
JPEG
JPEG disc.
5
INTRODUC
Front Panel and
Display Window
PLAY(2)
playback.
Starts
PAUSE(;)
Pause playback temporarily/ press repeatedly
for frame-by-frame playback.
STOP(9)
Stops playback.
POWER
Skip/Scan ( Q / S )
beginning of current chapter/track
PREVIOUS chapter/track.
Reverse
Switches the
player
Go to
ON and OFF.
Press and hold for two seconds for
Power indicator
a
or
fast
to
reverse
search.
Lights green when the
DVD player is turned on.
Forward
Skip/Scan ( T /
chapter/track.
R
)
Go to NEXT
Press and hold for two seconds for
a
fast forward search.
OPEN/CLOSE
Opens
or
Display
Disc
a
)
tray.
player.
Remote Sensor
Tray
disc here.
ANGLE active
TITLE
Indicates current title number
CHP/TRK
DVD
/
window
Shows the current status of the
Insert
(
closes the disc
Indicates current
chapter
or
track number
DVD inserted
Indicates total
CD Audio CD inserted
playing time/elapsed
time
VCD Video CD inserted
HD CD
PROG.
HDCD disc inserted
MP3 MP3
or
Programmed playback
active
WMA disc
inserted
RANDOM
RANDOM
playback
active
Indicates current
player
Indicates
function:
Playback, Pause,
MP3 VCD HD CD DVD
6
mode
etc.
TITLE
CHP/TRK
PROG.
RANDOM ALL
AB
repeat
Remote Control
POWER
Switches DVD
OPEN/CLOSE
ON and OFF.
Player
SOUND/MUTE
-
disc
during
playback.
TV
POWER
Turns off TV sound.
Selects
OPEN/CLOSE
SOUND/MUTE
-
control to DVD.
DISPLAY
PR./CH
DISPLAY
1
2
-
Selects
-
an
item in the
VOL
ENTER
TITLE
SLOW
menu on a
SKIP/SCAN
PLAY
SKIP/SCAN
(
)
CLEAR
?
playback temporarily/ press
repeatedly for frame-by-frame
playback.
?
SLOW(, /.)?
playback.
REPEAT
A-B
?
RANDOM ZOOM
*
SUBTITLE
Selects
a
a
subtitle
DVD
setup
Press and hold button for about
?
if
?
MARKER SEARCH
?
?
?
?
menu.
Operation Range
sensor
and press
remote
About 30° in each direction of the front of the
the
all.
sequence.
tracks in random order.
ZOOM
battery
video
image.
installation
Detach the
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
from the front of the
sensor.
sensor.
on
RANDOM
AAA AAA
the buttons.
Angle:
track number
A-B
Plays
?
Remote control
(7 m)
or
REPEAT
Repeat
?
Point the remote control at the remote
a
Repeat chapter, track, title,
Enlarges
remote
track.
CLEAR
?
menu.
SEARCH
Distance: About 23 ft
or
ANGLE
angle
)
Enters to the program edit mode
exits from that.
point during playback.
Remote Control
S
program list or a mark on the
MARKER SEARCH menu.
MARKER
Displays
(
Removes
SETUP
Marks any
Reverse SKIP/SCAN
language.
camera
or removes
)
chapter
PROGRAM
?
available
Accesses
T
two seconds.
a menu.
language (DVD) or
audio channel (CD).
Selects
(
PLAY(H)
playback.
previous chapter
audio
an
Forward SKIP/SCAN
Search backward*/ go to beginning
of current chapter or track or go to
0-9 number buttons
AUDIO
selection.
Starts
MARKER SEARCH
STOP(9)?
Stops playback.
an
menu
Search forward*/ go to next
or track.
AUDIO SUBTITLE ANGLE SETUP
Reverse/ Forward slow
Selects
channel of TV.
PROGRAM
Pauses
Selects numbered items in
input
the discs Title menu, if
Displays
?
PAUSE/STEP
video CD
a
available.
DVD disc.
;
menu.
of
TITLE
volume of TV.
MENU
Accesses
Selects AUX A/V
Acknowledges
STOP
Selects channel of TV and
changes
setup
menu
SELECT/ENTER
PR./CH
menu.
PAUSE/STEP
the
Displays
with PBC.
TV AV
-
VOL
MENU
(left/right/up/down)
4
3
SELECT
display.
Removes the
RETURN
-
Accesses On-Screen
mode of
RETURN/TV AV
mode of remote
operational
operational
remote control to TV.
DVD
Selects
tray.
This button is not available.
Selects 3D SURROUND
-
and closes the disc
Opens
with
the
rear
of
two R03
and
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUC
Rear Panel
COAXIAL
(Digital audio out jack)
digital (coaxial) audio equipment.
Connect to
5.1 CHANNEL AUDIO OUT
Connect to
--
--
AUDIO OUT
Connect to
or
stereo
(Left/Right)
amplifier, receiver,
--
center
system.
5.1 channel receiver
connection
subwoofer connection
front
an
--
a
speaker
rear
speakers connections
(surround) speakers connections
VIDEO OUT
Connect to
a
TV with video
inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to
a
TV with Y Pb Pr
(Y
Pb
Pr)
inputs.
S-VIDEO OUT
Connect to
OPTICAL
a
TV with S-Video
inputs.
(Digital audio out jack)
digital (optical) audio equipment.
Connect to
AC Power Cord
Plug
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
8
into the power
source.
Connections
Tips
Depending
on
resolution
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
best connections.
reproduction, connect
jacks to the audio in jacks
the
player's
of your
audio/video equipment.
amplifier, receiver, stereo or
See "Connecting to Optional Equipment"
on
--
--
directly to the
TV. Tune the TV to the correct video input channel.
Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
sure
the DVD
Player
is connected
system.
to a TV
Make
one
of the
capabilities
following connections, depending
existing equipment.
possible.
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
jacks on the DVD Player
corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
2
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the supplied audio cables.
TV
Notes
--
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 12.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Rear of TV
1
2
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
the video in
jack
jack
using
the TV
on
the DVD
to
the DVD
Video connection
on
"digital ready"
on
of your
Connect the VIDEO OUT
or
the
--
Connecting
the
1
page10.
Caution
Make
high-definition
connection
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
System
For better sound
a
pro)
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
described below.
AUDIO OUT
(ColorStream
If your television is
your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
--
Scan
Progressive
S-VIDEO
INPUT
AUDIO INPUT
VIDEO
INPUT
to
Player
(V).
Pr
the video cable
Pb
Y
R
L
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
S-Video connection
1
Connect the S-VIDEO OUT
to the S-Video in
cable
2
jack
on
jack
the TV
on
using
C
Player
S
AV
the S-Video
(S).
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
Component Video (Color Stream )
1
the DVD
connection
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN
to
the
Pb
corresponding
(C).
in
jacks on the DVD Player
jacks on the TV using an Y
Pr cable
2
Connect the Left and
Right AUDIO OUT jacks of
Player to the audio left/right in jacks on the
(A) using the audio cables.
the DVD
TV
Rear of
DVD
player
9
PREATION
Connections
Connecting
(Continued)
Optional Equipment
to
Notes
--
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
DVD
Player to the
amplifier, receiver,
cables (A).
Right
jacks on the
right in jacks on your
system, using the audio
stereo
--
AUDIO OUT
--
To
see
screen
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
1
digital output does not match
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
the
audio left and
or
If the audio format of the
Connect
one of the DVD Player's DIGITAL AUDIO
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
Analog
the audio format of the current DVD in the
display,
on-
press AUDIO.
connection to
multi-channel A/V receiver
a
with 6 Channel connectors
(Dolby Digital, DTS)
This DVD
Player contains a multi-channel decoder. This
playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
enables
OUT
1
Connect the CENTER and WOOFER
Center
and the Subwoofer
speaker
sponding in jacks
on
jacks for the
(C) to the corre-
your receiver.
You will need to activate the
2 (See "Digital
Multi-channel sound
Digital
A
Audio
player's digital output.
Output" on page 13).
multi-channel connection
digital
quality.
provides
the best
sound
For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
Dolby Digital
the logos on
supported by your DVD Player (MPEG 2,
DTS). Check the receiver manual and
and
Connect the Left and
2 (F)
3
to the
Right FRONT speaker jacks
corresponding in jacks on your receiver.
Connect the Left and
to the
corresponding
Make the
4 Output
Right REAR speaker jacks (R)
jacks on your receiver.
in
appropriate Sound settings for Analog
Speaker Settings in the setup menu.
and
See page 13.
the front of the receiver.
Rear of
Caution:
DVD
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
F
player
selected.
Rear of DVD
player
C
Front R
Front L
Center
Rear R
Rear L
Subwoofer
ANA
R
O
X
OPTICAL
A
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
10
R
L
AUDIO INPUT
OG 5.1CH
AUDIO INPUT
Amplifier
(Receiver)
Before
Operation
Before
the remote
using
control, press the DVD
button to select the device to be
General
or
TV
operated.
gives
DVD
Some DVDs
General
screen.
playback
Temporary
TRACK
ALL
AB
OFF
be
an
item.
number).
For
some
setting
functions,
setting.
Title
Repeat
Track
Repeat
All Tracks
Repeat
A-B
Repeat
Off
Resume
be
Action
display operation
Press DISPLAY
1
can
of
Repeat Chapter
CHAPT
displayed on the TV
changed on the menu.
can
title
setting
be also be used for
Feedback Field Icons
Repeat
TITLE
Display
Some items
On-screen
2
basic instructions for
status
(e.g.,
can
press SELECT/ENTER to execute the
operating the
Player.
require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the DVD
Player or is not available on the disc.
On-Screen
the
change
The number buttons
numbers
Explanation
This manual
Press 1/2 to
3
Caution:
play
(non-PBC
(non-PBC
from this
prohibited
Video CDs
or
only)
Video CDs
only)
point
not available
Notes
Some discs may not
provide all of the features on the
display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
during playback.
on-screen
Press 3/4 to select
an
The selected item will be
item.
highlighted.
DVD
Items
Function (Press 3/4 to select desired item)
Title Number
Shows the current title number and total number of
1/3
Chapter
Number
1 /12
Time search
0:20:09
Audio
language
Digital Audio
Output mode
1 ENG
and
Subtitle
language
Angle
5.1 CH
ABC
OFF
1/1
Sound
VCD2.0
D
NORM.
and
skips
to the desired title number.
Shows the current
chapters,
and
Shows the
chapter
skips
number and total number of
to the desired
chapter
number.
elapsed playing time, and
point by the elapsed time directly.
searches the
Shows the current audio soundtrack
encoding method, and
changes the setting.
channel
Shows the current subtitles
changes
the
language,
number, and
language,
and
angle number and total
changes the angle number.
Shows the current sound
changes
the
1/2,or
Numbers, SELECT/ENTER
Numbers, SELECT/ENTER
1/2,or
AUDIO
1/2,or
SUBTILE
setting.
Shows the current
angles,
and
1/2,or
Numbers, SELECT/ENTER
mode,
number of
and
setting.
1/2,or
ANGLE
1/2,or
SOUND
VCD1.1
Items
Function (Press 3/4 to select desired item)
Track Number
Shows the current track
1/4
Time
0:20:09
Audio Channel
and PBC On
Shows the
mode,
NORM.
changes
and
number, total number of tracks
skip to the desired track number.
elapsed playing
Shows the audio
STER.
Sound
titles,
Selection Method
channel,
(Display only)
and
the
setting.
1/2,or
Numbers, SELECT/ENTER
--
1/2,or
the audio channel.
Shows the current sound
changes
time
Selection Method
AUDIO
mode,
and
1/2,or
SOUND
11
PREATION
Before
Initial
You
Operation (Continued)
set your
can
Picture
Settings
Personal Preferences
own
on
the
play-
er.
TV
Aspect
DVD
4:3 Letterbox: Select when
nected.
Initial
General
Settings
Operation
The
setup
menu
above and below the
appears.
Scan
is
English
16:9 Wide: Select when
Disc Menu
French
Rating
German
Disc Audio
4:3
Letterbox
Spanish
Disc Subtitle
4:3
Panscan
Italian
Disc Menu
16:9 Wide
5.1
Code
Aspect
Chinese
Language
Country
Hungarian
Output
TV
Other--------
Speaker Setup
Menu
5.1
The
Others
item,
well
as
setting for the
setting(s).
selected, press 2, then
3/4 to select the desired
or
PLAY to exit the
menu.
Language
Language
DVD
for the disc's
language
code,
:
provides
the
highest quality picflickering.
If you are using the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks, but are connecting the
DVD Player to a standard (analog) television, set
Progressive Scan to Off.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
Menu, Audio, and
Disc Audio
Off
Disc Subtitle
On
Disc Menu
Rating
original language set for the disc is selected.
language, press number buttons to
enter the corresponding 4-digit number according to the language code list on page 25. If you enter the wrong language
Other
DVD
Scan Video
tures with less
Subtitle.
Original
Output
Speaker Setup
Scan
Progressive
Progressive
setting.
Press SELECT/ENTER to confirm your selection.
Some items
additional steps.
Press
Scan
Audio
alternate
While the desired item is
3
4
require
SETUP, RETURN,
5 setup
16:9 wide TV is connected.
Language
Press 3/4 to select the desired item.
as
a
Code
Progressive
will show the current
sides of the
Aspect
Digital
screen
style (Both
Rating
Polish
Scan
Audio
played
off).
cut
Others
a
back in that
Disc Subtitle
Digital
con-
bars
conventional TV set is
style
picture are
Progressive
Select
masking
Original
Menu
Disc
a
with
Disc Audio
TV
selected
standard 4:3 TV is
images
picture.
connected. The video material formatted in the Pan &
Country
2
a
theatrical
4:3 Panscan: Select when
Press SETUP.
1
Displays
:
The
Country
To select another
TV
Menu
Digital
5.1
Original
Disc Subtitle
English
Disc Menu
French
Rating
German
Aspect
Menu
Language
Progressive
Digital
5.1
Progressive
Chinese
NTSC
Polish
Speaker Setup
or
Scan
only
tem is
Other--------
works when the
AUTO. Also if the
Progressive Scan only
playing back
Hungarian
Output
Output
Speaker Setup
Note
Italian
Scan
Audio
Scan
Audio
Others
Spanish
Code
Country
TV
Language
Progressive
press CLEAR.
Disc Audio
Code
Aspect
system is
works
during
system is set
AUTO,
to
set to
DVD of NTSC sys-
.
Others
Menu
Select
a
see
you
Caution
Language
language
for the
menu.
when you press SETUP.
Disc Audio
English
Disc Subtitle
Spanish
Disc Menu
French
Rating
German
Country
TV
Code
Aspect
Menu
Language
Progressive
12
setup
Scan
Italian
This is the
menu
Once the
setting for progressive scan output is entered, an
image
only be visible on a progressive scan compatible TV
or monitor. If you set Progressive Scan to On in error, you
must reset the unit. Press STOP to stop any disc that is playing. Next, press STOP again and hold it for five seconds
before releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a
conventional analog TV or monitor.
will
Before
Operation (Continued)
Sound
Others
Audio
Digital
Output
Each DVD disc has
The
of audio
variety
output options.
player's Digital Audio Output according to the
Set the
a
type of audio system you
DRC, Vocal, PBC and Auto Play settings
Press 3/4 to select the desired item and press
setting of the selected item is
use.
changed
between On and Off.
if you connected the DVD Player's DIGITAL OUT jack to
a Dolby Digital decoder (or an amplifier or other equip-
Disc Audio
DRC
On
Disc Subtitle
Vocal
On
ment with
Disc Menu
PBC
Rating
Auto
Dolby Digital decoder).
Stream/PCM: Select "Stream/PCM" if you connected
the DVD Player's DIGITAL OUT jack to an amplifier or
TV
other
Menu
equipment
decoder
or
with
a
DTS
Country
decoder, Dolby Digital
MPEG decoder.
amplifier.
The DVD
a
2-channel
player outputs
digital
PCM 2ch format when you play a DVD video disc
recorded on the Dolby Digital, MPEG1, or MPEG2
recording system.
DOLBY
DIGITAL
Disc Subtitle
Stream/PCM
Disc Menu
PCM
Code
Menu
Digital
5.1
Audio
Dynamic Range
and the
96KHz
at
Scan
Progressive
Others
Control
(DRC)
can
thanks to
possible,
48 KHz
Language
Output
Speaker Setup
digital
audio
technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
Sample Freq.
Aspect
Scan
Audio
hear a program's soundformat, you
track in the most accurate and realistic presentation
/PCM
Rating
Country
Language
With the DVD
Disc Audio
TV
5.1
Off
Aspect
Digital
sounds in the
On
Play
Code
Progressive
PCM: Select when connected to
stereo
be
SELECT/ENTER. The
DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM"
a
can
changed.
Output
quietest ones). Then, you may listen to a movie
losing clarity of sound. Set
lower volume without
a
DRC to On for this effect.
Speaker Setup
Others
PBC
Sample Frequency
Set
To
change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz. When this choice is
made, this unit will automatically convert any 96KHz signals to 48KHz
your system can decode them.
If your receiver or amplifier is capable of handling
96KHz signals, select 96KHz. When this choice is
so
Playback
Control
(PBC)
On: Video CDs with PBC
are
Off: Video CDs with PBC
are
to On
or
Off.
played according to the PBC.
played the same way as Audio
CDs.
Vocal
Set Vocal to On
is
playing.
only
when
a
multi-channel karaoke DVD
The karaoke channels
on
the disc will mix
into normal stereo sound.
made, this unit will pass each type of signal through
without any further
5.1
processing.
Speaker settings
Auto
DVD
You
Select
speaker settings, including volume balance and
delay time, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 24.)
Play
can
cally
set up the DVD
starts
If Auto
Play
search
a
play
playing
On: Auto
Player
Play
Play
so a
DVD disc automati-
whenever the DVD is inserted.
mode is set to
title that
back the title
Off: Auto
Disc Audio
DVD
On, this DVD player will
playback time
automatically.
is
long
most and then
function is activated.
function is not activated.
Disc Subtitle
R
Disc Menu
Country
TV
Code
Language
Progressive
Digital
5.1
Volume
Size
Aspect
Menu
R
Note
Front L
Rating
Scan
Audio
Output
Distance
0dB
Large
The Auto
Play
function may not work for
some
DVDs.
0 ft
Test
Return
Speaker Setup
Others
13
PREATION
Before
Operation (Continued)
Parental Control
Rating
Movies
DVDs may contain
on
applies
to the
not suitable for
able for selection
more
on some
disc
complete
the disc. These
scenes on
8, and alternatively,
1 to
scenes
Therefore, discs may contain Parental Control
information that
certain
suitable
discs.
scenes are
Ratings
avail-
Disc Menu
6
Country
TV
Country
TV
Code
Menu
Digital
Digital
5.1
1
Scan
Audio
Output
Speaker Setup
Unlock
Change
Others
1
2
3
"Rating"
on
the
Setup
menu
using
the
3/4 buttons.
While
"Rating"
is
2.
selected, press
When you have not entered a password yet.
Enter a 4-digit password using the numbered buttons to create
a
the
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the
personal 4-digit security
pass-
setup
2
3
4
5
6
Shift the
Follow
cursor
unless
an
alternative
scene
is available
The alternative must have the
lower
one.
If
no
will not be
same
played
on
rating
the code is
4-digit password
changed (see "Changing
the
14
then press SETUP to exit the
Steps
4-digit
1-2
code
shown above to the left
as
Change using
3/4 buttons then press
SELECT/ENTER.
4
Enter the
new
4-digit code,
then press
SELECT/ENTER.
5
Enter
exactly the same code a second
fy by pressing SELECT/ENTER.
6
Press SETUP to exit the
If you
forget
your
forget
your
4-digit
password,
code
to clear the current pass-
1
Press SETUP to
2
Use the Number buttons to enter the
display
time and veri-
menu.
If you
the
setup
menu.
6-digit
number
"210499".
The
4-digit password is
display for a moment.
rating
menu.
(Rating).
code, then press SELECT/ENTER.
word, follow the procedure below.
play-
is necessary when
the 4-digit code"
below.).
the disc.
suitable alternative is found,
Press SELECT/ENTER to confirm your
5 selection,
button and select the
3/4 buttons.
or a
back will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
the 3/4 buttons.
Note
Select
scenes
using
Confirmation of the
3
rated
left.
menu.
a
played. Higher
using 2
using
on
Press SELECT/ENTER to confirm your country
selection, then press SETUP to exit the
Enter the old
be
on
code
Follow
1 to 8: Some discs contain scenes not
"Rating"
second character
1
Ratings
the 3/4 buttons
selected, press 2.
Select the first character
2
suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will
3 of
step
If you make a mistake before pressing SELECT/ENTER,
press CLEAR and enter 4-digit security password again.
Unlock: If you select Unlock, Parental Control is not
active. The disc will play in full.
using
Code is
Country
Changing
rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions.
Eight (8) has the most playback restrictions.
Code
menu.
word, then press SELECT/ENTER.
Select
Output
Speaker Setup
Country
While
personal 4-digit security password.
then press SELECT/ENTER. Enter the 4-digit password again and press SELECT/ENTER to verify.
4
Select
1
2
Language
Scan
Audio
Others
3
Progressive
Language
Progressive
4
Aspect
Code
Aspect
Menu
5
Rating
US
Rating
are
8
7
Code Set
Disc Menu
5.1
Disc Subtitle
were
to the list
List", page 26.).
Disc Subtitle
you to prevent discs from being played by your children
or to have certain discs played with alternative scenes.
Disc Audio
disc, referring
Disc Audio
rated from
whose standards
country/area
Code
(See "Country
to
or
scenes are
a
used to rate the DVD video
The Parental Control feature allows
country-dependent.
Select
DVD
Enter the code of
DVD
children.
Code
Country
3
Enter
a new
code
as
cleared. "P CLr" appears
shown above to the left
on
the
(Rating).
Operation
Playing
a
with DVD and Video CD
DVD and Video CD
Playback Setup
Turn
on
nected to the DVD
Audio
the
DVD
VCD2.0
the TV and select the video
system: Turn
input
source
General Features
Note
VCD1.1
input
source con-
the audio
on
system and select
player.
Moving
1
Press OPEN/CLOSE to open the disc
Load your chosen disc in the
side down.
2 playback
3
READING appears
starts
automatically.
on
If
tray.
When
might
appear
The
is
displayed
may be displayed first after
Video CD which offer a menu.
DVD
or
loading
a
Moving
want to
title/chapter
view, then press SELECT/ENTER
to start
you
play-
back.
Press TITLE
or
MENU to return to the
menu screen.
VCD2.0
Use the number buttons to select the track you want
Menu
setting
operating procedures for
depending on the disc.
the menu may differ
Follow the instructions on the each
setup. See page
Notes
the
4-digit
code must
be entered and/or the disc must be authorized
"Parental
--
Control",
DVDs may have a
player will not
Your
different from your
player is 2 (two).
to select
a
num-
title number.
1 /12
title
on a
more
disc has
than
as
1/3
one
more
than
track, you
one
chapter
can move
or a
to another
follows:
or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press 3/4 to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
For
two-digit numbers, press
(0-9)in rapid succession.
the numbered buttons
Search
DVD
VCD2.0
VCD1.1
1 Press and hold SKIP/SCAN .
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
to
can move
menu screen.
You also may set PBC to Off under
13.
--
title, you
Note
menu screen.
and the exact
using
one
to another CHAPTER/TRACK
chapter/track
to view.
Press RETURN to return to the
(0-9)
VCD1.1
a
than
Press SKIP/SCAN .
DVD
Use the 1 234 buttons to select the
more
DISPLAY, then press the appropriate
disc has
menu screen
DVD
follows:
as
bered button
When
a menu screen
disc has
DVD
instead.
If
a
Press
tray.
the TV screen, and playback
does not start,
menu
to another TITLE
another title
playback
press PLAY.
In some cases, the disc
use
1/3
tray, with the
Press OPEN/CLOSE to close the
otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
player.
connected to the DVD
Unless stated
(see
page 14).
region code.
on
play discs that have a region code
player. The region code for this
two seconds
during playback.
The
now
player
will
or
> for about
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
>
repeatedly
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes: mX2,
mX4, mX8, (backward) or MX2, MX4, MX8,
(forward).
or
to select the
3 To exit SEARCH
mode, press PLAY.
15
OPERATION
Operation
with DVD and Video CD
General Features
Still Picture and
VCD2.0
DVD
VCD1.1
2 You
can
will
on
by
T
or
VCD1.1
Repeat
3 To exit
The
On
during playback.
or
T to select the
required speed:
(backward), or
(forward).
t
1/16, t 1/8, t 1/4 or t 1/2
1/16, T 1/8, T 1/4 or T 1/2
To exit slow motion mode, press PLAY.
T
All icon appears
the TV
screen.
press REPEAT
the TV
on
a
screen.
press REPEAT
Off icon appears
Video CD with
a
to
menu
A-B
Repeat
A*
To
use
the TV
on
PBC, you
the
a
third time.
screen.
DVD
AB
repeat
"
Note
playback
in
reverse
is not
applicable
for
"
*
A
appears
2 Press A-B
Video CD.
the
on
function. See page 13.
VCD2.0
VCD1.1
OFF
sequence in
a
must set PBC to Off
Repeat
a
title:
1 Press A-B at your chosen
Slow motion
on
currently playing,
Repeat mode,
Repeat
setup
will enter SLOW mode.
2 Use the SLOW t
3
press REPEAT.
currently playing,
icon appears
the disc
repeat
The
pressthe remote control.
VCD2.0
DVD
1 Press SLOW t
player
Repeat Track
Note
Slow Motion
The
during playback.
repeatedly
Repeat Track/All/Off
the track
second time.
now
PAUSE/STEP
ing
-
repeat
The
2 To
go into PAUSE mode.
advance the picture frame-by-frame
player
1 To
Frame-by-frame playback
1 Press PAUSE/STEP
The
Video CDs
(continued)
briefly
starting point.
the TV
on
screen.
at your chosen end
again
point.
"A B" appears
briefly on the TV screen, and the repeat
begins ("AsB" appears the display window).
sequence
Random
VCD2.0
Karaoke DVD
3 To cancel the sequence, press A-B.
VCD1.1
1 Press RANDOM
during playback or in stop mode.
automatically begins Random Playback and
"RANDOM" appears on the display window.
The unit
2 To return to normal
"RANDOM"
playback, press RANDOM
disappears on the display window.
until
Time Search
1 Press DISPLAY
SKIP/SCAN >
the unit selects another title
during Random playback,
(track) and resumes
works with DVD Karaoke discs and
only
video CD without PBC.
to
use
the Random function. See
DVD
VCD2.0
TITLE
TRACK
DVD Video Discs
2 To
the
-
ALL
currently playing chapter,
icon appears
on
Repeat Title
16
icon appears
Repeat mode,
Repeat
on
the TV
the TV
press REPEAT
Off icon appears
on
the TV
invalid
to select the Time
display.
use
the number buttons to enter
start time. Enter
right
hours, minutes, and
sec-
in the box.
seconds, press SELECT/ENTER
to confirm
starts from the selected time
This unit
DVD
VCD2.0
can
produce
a
a
from two
five
more
multi-
a
home theater
2 To turn off the 3D Surround
again
to select "NORM".
or
system.
1 Press SOUND to select "3D SUR"
screen.
point.
effect, which
playback
speakers, instead of the
speakers normally required to listen to
channel audio from
third time.
current
conventional stereo
screen.
a
the disc. If you enter
VCD1.1
3D Surround
simulates multi-channel audio
screen.
on
time, playback will continue from the
3D SUR
NORM.
press
second time.
The
on-screen
seconds,
3D Surround
OFF
Repeat Chapter/Title/Off
Repeat Chapter
3 To exit
time of the
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
an
repeat the title currently playing, press REPEAT
The
elapsed playing
seconds, press 3/4
required
Playback
VCD1.1
REPEAT.
The
dis-
screen.
the start time.
Repeat
repeat
the
4 Within 10
page 13.
1 To
2 Within 10
onds from left to
OnaVideoCDwithPBC,youmustsetPBCtoOffon
menu
on-screen
at
current disc.
3 Within 10
CHAPT
the
playing
The "-:--:--" appears in the Time Search box.
Note
setup
The
during playback.
Search icon in the
playback.
This function
the
on
appears
The Time Search box shows the
Tip
By pressing
-:--:--
The Time Search function allows you to start
any chosen time on the disc.
play
Random
0:20:09
DVD
during playback.
effect, press SOUND
with DVD and Video CD
Operation
General Features
Zoom
VCD2.0
DVD
(continued)
during playback
or
still
playback
the
repeatedly,
discs: Menus
to acti-
level
magnification
move
the zoomed
through
picture.
3 Press CLEAR to
the
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or,
steps.
2 Use the 1 234 buttons to
normal
resume
playback
or
the contents of DVD Video
Checking
vate the Zoom function.
If you press ZOOM
increases up to six
return to
paused image.
use
the 1 234 buttons to
1 Press TITLE.
Note
function may not work for
some
2 The
DVDs.
Marker Search
VCD2.0
DVD
a
menu, the
Otherwise, the disc
list
menu can
and subtitle
3 To
menu
menu
will appear
angles, spoken language
chapters for the title.
camera
options,
and
the title menu, press TITLE
remove
the
on
may appear.
again.
VCD1.1
DVD
Disc Menu
MARKER SEARCH
1/9
your selection,
DVD
Title Menu
screen.
zoom
highlight
then press SELECT/ENTER.
If the current title has
The
DVD
VCD1.1
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
DVD Features
Special
1 Press MENU.
You
can
nine
points
To enter
1
start
playback
from
a
memorized
point. Up
be memorized.
can
2 To
is
menu
displayed.
the disc menu, press MENU
remove
again.
mark, follow these steps.
a
During disc playback, press MARKER when
playback reaches the spot that you want to
Camera
Repeat step
on
the TV
briefly.
screen
1 to enter up to nine Marker
points
on a
disc.
To Recall
a
Angle
If the disc contains
memorize.
The Marker icon will appear
2
The disc
to
DVD
scenes
1/1
recorded at different
camera
angles, you can change to a different camera angle
during playback.
Press ANGLE repeatedly during playback to select
desired angle.
The number of the current
Marked Scene
angle
appears
on
the
a
display.
1 ENG
1
disc
During
playback,
The MARKER SEARCH
press SEARCH.
menu
will appear
on
2 Within 10
seconds, press 1/2 to select
number that you want to recall.
a
the
screen.
Marker
will start from the Marked
4 To
remove
scene.
the MARKER SEARCH menu, press
SEARCH.
To clear
1
a
During
Marked Scene
disc
playback,
repeatedly during playback
language or audio track.
D
DVD
5.1 CH
to hear
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(STER., LEFT or RIGHT).
Subtitles
press SEARCH.
menu
will appear
on
the
screen.
Press 1/2 to select the Marker number that you want
to
3
Language
VCD2.0
dif-
a
VCD1.1
dif-
a
ferent audio channel
The MARKER SEARCH
2
the Audio
Press AUDIO
ferent audio
3 Press SELECT/ENTER.
Playback
Changing
DVD
ABC
1 ENG
Press SUBTITLE
different subtitle
repeatedly during playback
languages.
to
see
the
erase.
Press CLEAR.
Note
The Marker number will be erased from the list.
4
Repeat steps
5
To
2 and 3 to
erase
If
appears, the feature is not available
on
the disc.
additional Marker
numbers.
remove
the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
with Audio CD and MP3/WMA Disc
Operation
Playing an Audio CD and MP3/WMA Disc
CD
MP3
The DVD
ings
CD-ROM, CD-R
on
or
playing MP3/WMA recordings,
MP3/WMA Recordings on right.
Insert
read the notes
files that have
on
The
player
can
not read
extension other than
disc and close the tray.
CD; Audio CD menu appears on the TV
screen go to step 3.
MP3/WMA disc; The MP3/WMA-JPEG choice
menu appears on the TV screen. Go to step 2
MP3 file that has
an
file
a
".mp3".
a
About
Audio
technology.
WMA(Windows
compression of
JPEG
MP3/WMA Disc
limited
Press 3/4 to select the MP3/WMA then press
2 SELECT/ENTER.
The MP3/WMA
1.
as
appears on the TV screen.
Press RETURN to move to the MP3/WMA-JPEG
choice menu.
MP3 WMA
2.
3.
Folder1
Folder2
Folder3
Folder4
Folder5
Folder6
Clear All
5.
OFF
00:00
Media
a
A
Creator", which
single
to
creates
session disc
track then press PLAY
or
6.
elapsed playing
is
no
MP3/WMA
system.
MP3/WMA files in the
MP3/WMA file in the 1st
MP3/WMA files. If you wish
files, format all the data in
or use a new one.
names
should be named
incorporate ".mp3"
or
using
or
8 letters
or
less
".wma" extension
"********.WMA".
7.
Donotusespecialletterssuchas"/:*?"<>"etc.
8.
Total number of files
on
the disc should be less than
650.
to the next page.
move
Press MENU to
menu.
player
ISO9660 file
an
requires
playback
e.g. "********.MP3"
the current track's
time will appear on the display window and
Playback will stop at the end of the disc.
Press TITLE to
File
and must
SELECT/ENTER.
Playback starts.
During playback,
cannot
playback
the disc
a
with this
compatibility
follows:
-
track, it
folder, and SELECT/ENTER.
3 A list of files in the folder appears.
Press 3/4 to select
offers double the audio
Audio)
the MP3 format.
first track. If there is
Press 3/4 to select
compression
-
CD
Folder7
Folder8
Audio)
Microsoft audio
-
4.
Program
a
Sampling Frequency / only at 44.1kHz (MP3),
44.1kHz (WMA)
Bit rate / within 32 320kbps (MP3),
32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use "Easy22.05
menu
Media
WMA(Window
An WMA file is
MP3 WMA
4
Recordings
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
MPEG1 audio
CD-RW discs.
Before
1
MP3/WMA
An MP3 file is audio data
MP3/WMA formatted record-
play
can
on
About MP3
WMA
Player
Notes
move
to the
previous
page.
This DVD
player requires discs/recordings
to meet
certain technical standards in order to achieve
Program
MP3 WMA
Program
CD
TRACK01
TRACK02
TRACK 1.mp3
TRACK03
TRACK 2.mp3
TRACK 5.mp3
TRACK06
TRACK 6.mp3
TRACK07
TRACK 7.mp3
Clear All
TRACK08
STER.
NORM.
Audio CD
menu
0: 56: 18
Clear All
TRACK 8.mp3
00:00
1
If you
are
use
in
a
MP3/WMA
menu
file list and want to return to the Folder
the 3/4 to
highlight
SELECT/ENTER to return to the
5
To
18
stop playback
and press
previous
at any other
optimal
automatically
many different types
(including CD-R containing
MP3 or WMA files). That require certain pre-existing
conditions (see above) to insure compatible playback.
OFF
Tip
list,
are
are
of recordable disc formats
TRACK 4.mp3
TRACK05
Pre-recorded DVDs
set to these standards. There
TRACK 3.mp3
TRACK04
playback quality.
menu screen.
time, press STOP.
Customers should also note that
required
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no right
grant such permission. Permission should always
to
be
sought
from the
copyright
owner.
Operation
with Audio and MP3/WMA Disc
CD
Pause
MP3
1 Press PAUSE/STEP
WMA
Repeat
during playback.
2 To return to
playback,
PAUSE/STEP again.
press PLAY
or
To
1
press
repeat
CD
to another Track
Press SKIP/SCAN .
or
>
Press SKIP/SCAN . twice
In
previous
case
WMA
briefly during
step back
to
briefly
of audio
CD,
to
The
directly to any track, enter
the numbered buttons (0-9)
to go
using
icon and "A
Repeat
"
appears
during playback.
Repeat Track/All/Off
1 To
MP3
WMA
repeat the track currently playing, press REPEAT.
The
Repeat
icon and "TRACK" appears
on
the
begins
to
play repeatedly.
Repeat
icon and "OFF" appears
3D Surround
This unit
produce
can
menu
repeat all tracks
on a
disc, press REPEAT
a
3D Surround
Repeat
3 To cancel
The
Repeat mode,
Repeat
Search
icon and "ALL" appears
on
MP3
on
two seconds
during playback.
The
now
will
effect, which
from two
speakers, instead of the
speakers normally required to listen to
five
more
multi-
channel audio from
a
home theater
again
or
system.
during playback.
effect, press SOUND
to select "NORM.".
the
a
third time.
menu screen.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear a
(STER., LEFT, or RIGHT).
CD
different audio channel
WMA
1 Press and hold SKIP/SCAN .
player
menu screen.
menu screen.
press REPEAT
icon and "OFF" appears
CD
the
press
conventional stereo
2 To turn off the 3D Surround
a sec-
the
playback
1 Press SOUND to select "3D SUR"
ond time.
The
on
play,
CD
screen.
2 To
menu screen.
icon and "A B" appears
simulates multi-channel audio
CD
the
on
at your chosen end point.
on the menu screen,
again
Repeat
press A-B at your chosen start*
3 To exit the sequence and return to normal
A-B again.
track.
the track number
CD
sequence.
and the sequence
to return to the
or
a
2 Press A-B
The
playback to go to the next track
beginning of the current track.
the
MP3
A-B
During disc playback,
ing point.
The
Moving
(Continued)
> for about
or
go into SEARCH mode.
2 Press and hold SKIP/SCAN .
or > repeatedly
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
to select the
Search
speed
and direction
are
indicated
on
the
menu
screen.
3 To exit SEARCH
mode, press PLAY.
CD
Random
1 Press RANDOM
MP3
WMA
during playback
or
when
playback
is
stopped.
The unit
automatically begins
RANDOM
and
or
on
the
Playback and
display window
menu screen.
2 To return to normal
edly
play
Random
"RAND." appears
until RANDOM
window and
press RANDOM repeat"RAND." disappears on the dis-
playback,
or
menu screen.
19
OPERATION
Operation
Viewing
with JPEG Disc
JPEG disc
a
JPEG
5
This DVD
Player can play discs with JPEG files and
picture CD. Before playing JPEG recordings,
the notes on JPEG Recordings on right.
Insert
1
a
disc and close the
TV
menu
appears
on
the
screen.
>
once
or
during viewing a
previous file.
to the
Still Picture
To
Press 3/4 to select the JPEG then press
SELECT/ENTER.
appears
time, press STOP.
on
the TV
will
during
slide show.
player
go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
JPEG
menu
or
to advance to the next file
1 Press PAUSE/STEP
MP3 WMA
The JPEG
at any other
appears.
to another File
The
2
menu
Press SKIP/SCAN .
picture
tray.
The MP3/WMA-JPEG choice
stop viewing
The JPEG
Moving
Kodak
read
To
now
flip the picture
Press 3/4
during showing a picture
picture horizontally or a vertically.
screen.
to
flip
the
JPEG
To rotate
Folder1
Folder2
picture
Folder3
Press 1/2
Folder4
Folder5
Folder7
during showing
clockwise
picture
Folder6
or
a
picture
to rotate the
counter clockwise.
Folder8
Slide
Speed
Off
Notes
Press 3/4 to select
a
folder, and SELECT/ENTER.
3 A list of files in the folder appears.
Press RETURN to
choice
move
to the MP3/WMA-JPEG
on
Depending
JPEG
Recordings
upon the size and number of the JPEG
a long time for the DVD player to
files, it could take
read the disc's contents. If you don't
menu.
see an on-screen
display after several minutes, some of the files are too
reduce the resolution of the JPEG files to less
big
than 2 mega pixels and burn another disc.
---
Tip
If you
list,
are
"
"
in
a
file list and want to return to the Folder
the 34 buttons
use
on
the remote to
Total number of files and folders
highlight
previous
If
want to view
a
a particular file, press 3/4 to
file and press SELECT/ENTER or
PLAY.
When you are using software such as
Creator" to burn the jpeg files into the
that all the selected files have the
Viewing the file proceeding starts.
During viewing a file, press RETURN
previous menu (JPEG menu).
Press TITLE to
Press MENU to
move
move
when
to
move
to the
to the next page.
to the previous page.
copying
File
shown
Picture2.jpg
Picture3.jpg
Picture4.jpg
Picture5.jpg
Picture6.jpg
Picture7.jpg
5/32
1024X768
Slide
Speed
5/32
Off
1024X768
Picture5.jpg
Tip
There
are
three
viewing
Slide
Speed options: Fast,
to highlight the Slide
select the option you want to
Normal, Slow, and Off. Press 1/2
Speed
then press 3/4 to
use, and press SELECT/ENTER.
20
them
names
Folder1
Picture1.jpg
into the CD
If the files have
rename
be read
JPEG
the disc should be
Some disc may be incompatible due to different
recording format or condition of disc.
menu screen.
you
4 highlight
on
less than 650.
and press SELECT/ENTER to return to the
by
as
"Easy
CD
CD-R,
ensure
".jpg"
extensions
layout.
".jpe" or ".jpeg" extensions, please
".jpg" files.
as
without
".jpg" extension will not be able to
player. Even though the files are
image files in windows explorer.
this DVD
JPEG
Programmed Playback
Programmed Playback
CD
VCD2.0
with Audio CD
VCD1.1
MP3
function enables you to store your favorite
tracks from any disc in the player memory.
Program
Program
mode to enter the
during playback or in
Program Edit mode.
the
E
The
mark will appear to the right of the word
the right side of the menu screen.
on
Note
On
a
Video CD with
setup
menu
to
PBC, you
the
use
must set PBC to Off
on
the
function. See page 13.
Program
contain 30 tracks.
can
Press PROGRAM
1
with Video CD
Programmed Playback
and MP3/WMA Disc
The
WMA
stop
Program
Insert Video CD and close the
1
2
Press PROGRAM while
The VCD
Program
menu
OPERATION
tray.
is
playback
stopped.
will appear.
Program
VCD
E
TRACK 1
TRACK 2
Note
TRACK 3
Press PROGRAM to exit the
Edit
Program
TRACK 4
mode;
TRACK 5
TRACK 6
E
the
mark will
disappear.
TRACK 7
Clear All
TRACK 8
Select
2 place
a track, then press SELECT/ENTER to
the selected track on the Program list.
Note
Repeat step 2
Program list.
3
to
place
E
Program
CD
additional tracks
the
Program
MP3 WMA
TRACK 1
TRACK 12
TRACK 2
TRACK 8
TRACK 1.mp3
TRACK 3
TRACK 10
TRACK 2.mp3
TRACK 4
TRACK 3
TRACK 3.mp3
TRACK 7
TRACK 7.mp3
Clear All
TRACK 8
0: 56: 18
STER.
TRACK 3.mp3
Audio CD
00:00
programmed
track you selected last is
highlighted
on
move
Press MENU to
move
previous
Press PLAY to start.
in the order in which you programmed
the tracks and "PROG." appears on the menu screen.
resume
all of the tracks
normal
select
a
on
the
Program
list
playback from programmed
(or MP3/WMA) list
and then press SELECT/ENTER.
"PROG." indicator disappears on the menu
screen.
in the
display
window.
Tracks
on
the
menu
a
the program
icon and "ALL" appears
Repeat mode,
list, press
Track from
the
on
menu screen.
press REPEAT
icon and "OFF" appears
Repeat
Erasing
on
second time.
a
Repeat
on
Program
the
a
third time.
menu screen.
List
1 Press PROGRAM
MP3/WMA disc
Program
track of CD
disappears
repeat all tracks
REPEAT
The
page.
6 Playback begins
Playback stops after
have played once.
normal
icon and "TRACK" appears
Repeat
To cancel
to the next page.
to the
resume
screen.
The
Press TITLE to
with
left.
repeat the track currently playing, press REPEAT.
The
To
5 playing.
playback,
from
To
Press 3/4 to select the track you want to start
To
To
Repeat Programmed
menu
the program list.
7
on
OFF
Press 2.
The
"Programmed Playback
Audio CD and MP3/WMA disc"
"PROG." indicator
3
MP3/WMA
menu
menu.
playback
4 programmed playback,
press PROGRAM.
Clear All
TRACK 8.mp3
NORM.
2-6 of
steps
Program
TRACK 4.mp3
TRACK 5.mp3
TRACK 6.mp3
Follow
PROGRAM to exit the
or
TRACK 2.mp3
TRACK 4.mp3
TRACK 6
Press RETURN
3
E
TRACK 8.mp3
TRACK 5
4
on
E
The
during playback (Audio CD and
only) or in the stop mode to enter the
Edit mode.
mark will appear.
2 Press 2 to
move
to the
Program
list.
3 Use 3/4 to select the track that you wish to
from the Program list.
erase
4 Press CLEAR.
The track will be erased from the
Erasing
the
1 Follow
steps
List"
as
Program
Complete Program
1-2 of
"Erasing
a
list.
List
Track from
Program
above.
2 Use 3/4 to select "Clear
All", then press
SELECT/ENTER.
The
complete Program
The programs
are
for the disc will be erased.
also cleared when the disc is removed.
21
Additional Information
Last Condition
DVD
This
player
Your remote control is
memorizes the
user
settings
for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
If you load a disc that has its settings memothe latest stop position is automatically recalled.
player.
rized,
player
well
as
it.
Screen Saver
Player
be
device),
sure
2
The
ate the
on
supports
control is set to Code 1.
Playback
HDCD is
process that increases the fidelity of both
encoded HDCD discs and standard CD audio
a
discs. When
an
cial decoder is
HDCD-encoded disc is
automatically
Indicator
lights.
To
the benefits of
No
user
playing, the speactivated and the HDCD
intervention is
required.
HDCD, your DVD Player must
enjoy
be connected to your A/V receiver via the Analog Audio
Outputs. However, if your A/V receiver or surround
processor is equipped with built-in HDCD decoding, you
may also use a Coaxial or Optical digital audio connecthat the HDCD
processing
is done there.
Select
appropriate system mode for your
system. If NO DISC appears in the display window,
press and hold PAUSE on the front panel for more than
TV
5 seconds to be able to select
a
system (PAL, NTSC,
AUTO).
When the selected
system does not coincide with the
system of your TV, normal color picture may not be
displayed.
Select when DVD
player
is connected with Multi
player
is connected with
player
is connected with PAL-
system TV.
NTSC:
Select when DVD
NTSC-TV.
PAL:
Select when DVD
TV.
22
shipped
are
used to oper-
two remote control
from the
factory,
the remote
remote control.
remote control
are
(If the batteries in the
replaced while the remote control
2, the setting will revert to Code 1.)
is set to Code
To set the remote control back to Code 1, hold down
both the TV button and the number "1" button on the
remote control.
Note
If the remote control does not
TV, try the other code
or use
ly supplied
with the LG TV.
Due to the
variety
trol will
operate
operate your particular
the remote control original-
of codes used
OUR COMPANY cannot
You must select the
AUTO:
dif-
To set the remote control to Code 2, hold down both
the TV button and the number "2" button on the
HDCD
?
a
TV but-
codes for LG TV: Code 1 and Code 2.
When the unit is
or
or
or
Remote Control Codes for LG TV
This remote control
for about five
System
(to operate
to press the DVD
remote control
turn itself off.
so
operate for your LG TV.
LG TV.
engaged
tion
your DVD
POWER, PR./CH.(E/D), VOL (1 /2), MUTE and
TV AV buttons
minutes, the DVD Player will automatically
After the Screen Saver has been
specially
operating
To switch the remote control mode
Setting
picture appears when you leave the
in stop mode for about five minutes.
screen saver
DVD
of
ton first.
Settings are stored in memory for use any time.
This player does not memorize settings of a disc if
you switch off the player before commencing to play
The
capable
limited functions of LG TV.
Before using the remote control, press the DVD
TV button to select the device to be operated.
1
Notes
--
as
Follow the instructions below to
ferent
--
the TV
Controlling
Memory
VCD1.1
CD
by manufacturers,
guarantee that the remote
every model of LG TV.
con-
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD player does
No disc is inserted.
Plug the power
securely.
Insert
a
disc.
cord into the wall outlet
(Check
that the DVD or,
audio CD indicator in the
window is
not work.
No
service.
contacting
The TV is not set to receive DVD
picture.
signal
output.
Select the
on
the TV
player
The video cable is not connected
display
lit.)
appropriate video input mode
the picture from the DVD
so
the TV
on
appears
Connect the video cable
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
equipment
connected with the
audio cable is not set to receive DVD
signal output.
The audio cables
are
not connected
the TV.
on
audio receiver
input
mode of the
you can listen to the
sound from the DVD player.
so
Connect the audio cable
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The
Digital Audio Output
position.
is set to the
playback picture
is
The disc is
the
on
equipment
connected with
the audio cable.
Set the
Digital Audio Output to the
position, then turn on the DVD
player again by pressing POWER.
correct
wrong
The
Turn
Clean the disc.
dirty.
poor.
The DVD
not start
player does
playback.
No disc is inserted.
Insert
a
disc.
(Check
that the
DVD,
audio CD indicator in the DVD
or
display
is
lit.)
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
down.
placed upside
Place the disc with the
playback
side
down.
The disc is not
placed
within the
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
The remote control is not
does not work
remote
properly.
sensor
Cancel the
pointed
player.
at the
of the DVD
player.
There is
an
obstacle in the
rating
tray correctly
path of the
player.
Rating
function
or
change
level.
Point the remote control at the remote
sensor
The remote control is too far from the
DVD
the disc
Clean the disc.
the
The remote control
on
guide.
of the DVD
Operate
(7 m).
player.
the remote control within 23 ft
Remove the obstacle.
remote control and the DVD
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
23
REF NC
Speaker Settings
Make the
following settings
for the built-in 5.1 channel
Distance
surround decoder.
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the sound
Disc Audio
has to travel to reach your set listening point. This
allows the sound from each speaker to reach the listen-
Disc Subtitle
R
Disc Menu
Code
Digital
Audio
Large
Distance
Scan
same
time.
(1
Speaker Setup
→
→
Select "5.1
tons
2
on
Speaker Setup" using
the
While "5.1
setup
is
Select
speaker.
341 2 buttons.
selection
speaker that you want to adjust. (Front speak(Left), Front speakers (Right), Center Speaker, Rear
speakers (Left), Rear speakers (Right), or Subwoofer)
a
ers
Note
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Volume
Press 1 / 2 to adjust the output
speaker. (-10dB 0dB)
level of the selected
-
Size
Press 1 / 2 to set
a
mode.
(Large,
Small
or
None)
If you have connected the system to a speaker with
low frequency of 100Hz or below, select "Large."
a
If you have connected the system to a speaker witha low frequency of 100Hz or below, select
out
"Small." If you have not connected a subwoofer,
always select "Large" for Front speaker (L/R).
When you do not have
select "None."
Front L/R
speaker's
a
size
certain
can
speaker connected,
be set to
"Large"
or
"Small."
If Front L/R
size is set to
Center
can
speaker's
speaker's size
Subwoofer's size
"None".
24
can
"Small," Rear and
be set to "Small"
be set
only
to
test
→
→
Press SELECT/ENTER to return to the
selected, press 2
Press 1/2 buttons to select the desired
Speaker
cm)
Return
button.
3
4 Adjust options by using
30.48
the 3/4 but-
menu.
Speaker Setup"
=
Press SELECT/ENTER to test the signals of each
speaker. Adjust the volume to match the volume of
signals memorized in the system.
Front Left (L)
Front Right (R)
Center
Rear Left (L)
Rear Right (R)
Return
Others
1
ft
Test
0 ft
Test
Output
at the
0 dB
Size
Language
Progressive
5.1
Volume
Aspect
Menu
er
Front L
Rating
Country
TV
R
"Large"
or
or
"None."
previous
menu.
Language Code
Enter the
(See
appropriate
12).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
page
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Ameharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Rumanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
REF NC
25
Country Code
Enter the
appropriate
List
code number for the initial
setting "Country
Code"
(See
page
14).
Code
Country
Code
Country
Code
Country
Code
Country
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Seychelles
AE
United Arab Emirates
ES
Liechtenstein
SD
Sudan
Afghanistan
ET
Spain
Ethiopia
LI
AF
LK
Sri Lanka
SE
Sweden
AG
FI
Finland
LR
Liberia
SG
Singapore
AI
Antigua and
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
Georgia
MK
Macedonia
ST
Saint Tome and
AZ
GF
French
ML
Mali
SU
Former USSR
BA
Azerbaidjan
Bosnia-Herzegovina
GH
Ghana
MM
Myanmar
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
Guadeloupe (French)
MR
Mauritania
TF
BH
Bahrain
GQ
Equatorial
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
Malaysia
TN
Tunisia
BS
Bahamas
GY
MZ
Mozambique
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
NA
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
Barbuda
(European
Guyana
Guinea
Georgia
& S. Sandwich
(USA)
Republic
French Southern
(French)
Tobago
BZ
Belize
HR
Croatia
NG
Taiwan
HT
Haiti
NI
Nigeria
Nicaragua
TW
Canada
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
ID
Indonesia
NO
IE
Ireland
NP
Norway
Nepal
UG
CG
(Keeling) Islands
Central African Republic
Congo
UK
Uganda
United Kingdom
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA Minor
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
CL
Chile
CM
Cameroon
CN
Outlying
Islands
British Indian Ocean
NZ
New Zealand
US
United States
Territory
OM
Oman
UY
Uruguay
IQ
Iraq
PA
Panama
UZ
Uzbekistan
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
Polynesia (French)
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
CS
Former Czechoslovakia
JM
Jamaica
PH
Papua New
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
Verde
JP
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
Japan
Kenya
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
DE
Germany
Djibouti
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
Republic
IO
Principe
Territories
CA
CF
Mayen
Islands
Anguilla
Guinea
Miquelon
City
Grenadines
Islands
Islands
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
26
Republic
Islands
(French)
State
(British)
(USA)
Specifications
General
Power
Power
requirements
AC 110-240V
consumption
14W
Dimensions
Mass
(approx.)
,
50/60 Hz
430X48X242mm(wxhxd)
2.34
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
(41˚F
to
REF NC
95˚F)
System
Laser
Semiconductor
Signal system
PAL/NTSC
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
laser, wavelength
650
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Outputs
VIDEO OUT
1
Vp-p
75 Ω, sync
1.0 V
negative,
RCA
jack
x
1
S-VIDEO OUT
(Y)
(p-p),
negative
(C)0.3V(p-p)75Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
75 Ω,
sync, Mini DIN
4-pin
x
output (digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio
output (optical audio)
5 V
Audio
output (analog audio)
2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1
75 Ω,
Optical
connector
x
1
1
Audio
(p-p),
x
1
Accessory
S-Videocable.....................1
Videocable.......................1
Audiocable.......................1
Remotecontrol....................1
Batteries.........................2
Design
and
specifications
are
subject
to
change
without notice.
Manufactured under license from
Confidential
unpublished
DTS and DTS
Digital
works.
Surround
Dolby Laboratories. Dolby and the double-D symbol are trademarks
Copyright 1992-1997 Dolby Laboratories. All rights reserved.
are
registered
trademarks of
Digital
Theater
Systems,
of
Dolby
Laboratories.
Inc.
HDCD , High Definition Compatible Digital and Pacific MicrosonicsTM are either registered trademarks or trademarks
Microsonics, Inc. in the United States and/or other countries. HDCD system manufactured under license from Pacific
Microsonics, Inc. This product is covered by one or more of the following patents: United States: 5,479,168, 5,638,074,
5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,872,531 and 5,864,311. Australia: 669114. Other patents pending.
,
of Pacific
27
SAFETY PRECAUTION
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS POWER
SUPPLY WHEN IT IS NOT IN USE. DO NOT ALLOW THIS UNIT TO BE
EXPOSED TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC
SHOCK, DO NOT REMOVE THE COVER. NO
USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
The
working life of this set is 7 years since the date of delivery to conUpon the expiry of the said period, it might be unsuitable for the
according to their designation.
sumer.
use
Please read these
precautions before you operate this unit.
heat, cold, moisture and dust.
?
Avoid extreme
?
Avoid
?
is wiped with a volatile agent such
chemically processed cloth, the surface finish may deteriorate or its coating may peel.
Use the unit only in a horizontal position, and do not place anything heavy
?
?
?
field.
(This
Be careful when the surface of the
case
using
formance.)
near a
magnetic
as
benzene, alcohol, thinner,
on
it.
etc.
will
adversely
affect the units per-
or a
Keep the unit away from flower vases, tubs, sinks, etc. If any liquids should
spill into unit, serious damage could occur. In that case, please consult
qualified service personnel.
Do not obstruct the ventilation holes: they prevent overheating. Even soft
materials such
as
paper and cloth may prevent proper ventilation of the
unit.
?
There
are no
serviceable
parts inside. For service, please
contact
your service centre.
JEDDAH MAIN SERVICE CENTER
P.O.BOX 704, JEDDAH 21421 KINGDOM OF SAUDI ARABIA
TEL) 02-629-2929
JEDDAH QUICK SERVICE
TEL)
02-663-3888 EXT.
CENTER
340,343
RIYADH BRANCH SERVICE CENTER
TEL)
01-461-5559
AL KHOBAR BRANCH SERVICE CENTER
TEL)
P/NO
:
3834RS0054Y
03-857-2629/2637
Download PDF

advertising