advertisement
▼
Scroll to page 2
of 27
DV8621PCK_HA3EML_ENG DVD PLAYER OWNER'S MANUAL MODEL : DV8621P Before connecting, operating adjusting this product, booklet carefully and completely. please read this instruction or Safety Precautions CAUTION NOTES ON COPYRIGHTS: RISK OF ELECTRIC SHOCK DO NOT OPEN It is forbidden via cable, CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash equilateral triangle with arrowhead symbol is intended to alert the within user an to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient to constitute magnitude risk of electric a law to copy, broadcast, show, broadcast in public, or rent copyrighted material without by play permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. shock to persons. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINIThe exclamation point within is intended to alert the important operating user an equilateral triangle to the presence of and maintenance instructions in the literature (servicing) accompanying the TION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOM- MENDED THAT THE USER SWITCH THE CONNECTION TO product. THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- QUESTIONS REGARDING OUR TV SET COMPATIBILITY TRIC WITH THIS MODEL SHOCK, DO NOT EXPOSE THIS PRODUCT TO WARNING: Do not install this as a book equipment in confined space a similar unit. case or To ensure manual proper carefully use Player employs of this a Laser product, please System. read this owner's and retain for future reference should the unit require maintenance, contact (see service procedure). an Use of or controls, adjustments, dures other than those specified authorized service location the of proceherein may result in haz- performance ardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be This placed product on the DIRECTIVE 2 apparatus. is manufactured to the radio interference 73/23/EEC. PLAYER, PLEASE on the back of unique to this unit and not available others. You should record requested information here and retain this guide as a permanent record of your purchase. CAUTION: Video Disc DVD this unit. This number is Serial No. Digital 625p SERIAL NUMBER: The serial number is found Model No. This AND CONTACT OUR CUSTOMER SERVICE CENTER. RAIN OR MOISTURE. such 525p comply with requirements of EEC 89/336/EEC, 93/68/EEC and ___________________________________ ___________________________________ to Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. . Preparation . . . . . . . . .18-19 18 . . . . . .18 Pause.............................19 MovingtoanotherTrack...............19 RepeatTrack/All/Off..................19 Search.............................19 Random...........................19 RepeatA-B.........................19 3DSurround........................19 .19 ChangingtheAudioChannel. OperationwithJPEGDisc...................20 ViewingaJPEGdisc.....................20 MovingtoanotherFile.................20 . RearPanel................................8 . . . . . . . . . . . Connections............................9-10 StillPicture.........................20 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. BeforeOperation.......................11-14 GeneralExplanation......................11 On-ScreenDisplay.......................11 InitialSettings........................12-14 12 Initial Settings General Operation. Language..........................12 Toflipthepicture.....................20 Torotatepicture......................20 .20 NotesonJPEGRecordings. ProgrammedPlayback.....................21 Programmed Playback with Audio CD and . . . . . . . . . . . . . . . . . Picture.............................12 Sound.............................13 . . . . . . . . . . . MP3/WMADisc.........................21 ProgrammedPlaybackwithVideoCD. RepeatProgrammedTracks ErasingaTrackfromProgramList. ErasingtheCompleteProgramList. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 .21 .21 .21 Others.............................13 AdditionalInformation.....................22 ParentalControl......................14 LastConditionMemory...................22 ScreenSaver...........................22 Operation .15-17 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............15 . . . . . . . GeneralFeatures........................15 MovingtoanotherTITLE...............15 15 Moving to another CHAPTER/TRACK . . . . . Search.............................15 Still Picture and Frame-by-Frame Playback . 16 SlowMotion.........................16 VideoModeSetting......................22 22 Controlling other TVs with the remote control SystemSelect..........................22 . . . Reference Troubleshooting..........................23 LanguageCodeList.......................24 CountryCodeList.........................25 Specifications............................26 Random...........................16 Repeat............................16 RepeatA-B.........................16 About the TimeSearch........................16 symbols 3DSurround........................16 Indicates hazards Zoom..............................17 itself MarkerSearch.......................17 SpecialDVDFeatures....................17 TitleMenu..........................17 DiscMenu..........................17 or other for instructions likely to cause material damage. Indicates special operating Indicates tips and hints for harm to the unit features of this unit. making the task easier. CameraAngle.......................17 .17 ChangingtheAudioLanguage. .17 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................17 3 INTRODUC Before Use Playable Disc-related terms Discs Title (DVD only) DVD The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit can play a DVD±R, DVD±RW, Kodak PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files. -- you to locate it -- -- Depending the conditions of the recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself, some CD-R/RW (or DVD±R/±RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on (Video audio or an enabling On CD and audio CD only) a picture or a musical piece CD. Each track is assigned on a a video CD track number, you to locate the track you want. video CD with PBC (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a you to locate the scene you want. A scene is composed of one or several tracks. Types other functions may be added. Refer also to the instructions supplied with the DVDs with the and Video CDs. Some DVDs made for business purposes may not be played on the unit. of or code of the DVD player and DVDs player is designed and manufactured 5 for playback of region "5" encoded DVD software. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "5" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. 4 easily. Scene playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available This DVD enabling DVDs and Video CDs Some Regional feature content Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Sections of on accompanying additional feature content, or music album. Each title is assigned a title reference number Track Notes or There of video CDs are two types of video CDs: equipped with PBC (Version 2.0) (Playback control) functions allow you to interact Video CDs PBC functions, or other typical computer-like operations. Moreover, still pictures high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) After the unit Handling When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, unit after removing the disc. To keep Do not near or radio, turn off the or use volatile liquids, such as the unit. Do not leave rubber leave marks Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable increase inside the car. light, temperature as Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. on a plastic products in long period of time. They will or the surface. Do not soft, dry cloth. If the surfaces soft cloth use thinner, or are moistened with lightly solution. Do not benzine, case. insecticide spray, To clean the cabinet use a store the disc in its the unit Cleaning a playing, the exterior surfaces clean contact with the unit for Use discs Storing Precautions a extremely dirty, mild detergent strong solvents such as these as might damage alcohol, the surface strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older About vinyl records. Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling get playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the on the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols for instructions following symbol is represented by the symbol. one to the disc screen of the DVD Video CDs with the PBC (playback control) function. discs Hold the disc on A section whose title has applicable only Notes symbol display or tape on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Display Window POWER Switches the player ON and OFF. PLAY(N) Starts playback. PAUSE(X) Pauses playback. Press repeatedly frame-by-frame playback. STOP ( x for ) Stops playback. Reverse Scan/Skip ( m / . ) Go to previous chapter / track or to the beginning. Press and hold for two seconds for fast Forward Skip/Scan ( > / M Go to the next chapter / track. reverse ) search. OPEN/CLOSE(Z) Opens or closes the disc tray. Press and hold for two seconds for fast forward search. Disc Tray Insert a disc here. Display window Shows the current status of the player. Remote Sensor Point the DVD Player remote control here. Display Window Indicates current function DVD player (Play, Pause) DVD inserted Indicates CD Audio CD inserted VCD Video CD inserted SVCD MP3 MP3 or Indicates Video CD inserted Super DTS and current Indicates chapter or encoding Dolby digital of the current disc. WMA disc inserted CHP/TRK repeat mode Indicates total time/elapsed playing time track number S VCD DVD CHP MP3 CD TRK 6 AD B ALL Remote Control OPEN / CLOSE Opens and closes the disc Switches DVD Player tray. TV POWER: POWER Turns the TV ON and OFF. 0-9 number buttons Selects numbered items in a menu. CLEAR Removes track number on the program list or a mark MARKER SEARCH on the a menu. SCAN(m/M) Search backward TV Control Buttons or forward. PAUSE/STEP(X) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. PLAY(N) Starts playback. on or off. TV PR/CH +/--: Selects TV's channel. INTRODUC TV VOL +/--: TV's volume. Adjusts AV: Selects the TV's source. SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. STOP(x) Stops playback. TITLE Displays title menu, if available. DVD MENU Accesses menu on a DVD disc. RETURN Removes the bBvV(left/right/up/down) Selects - an item in the ? plays menu. ? ENTER Confirms menu ? selection. ? display. AUDIO Selects an ? an SUBTITLE Selects a subtitle language. ANGLE Selects a DVD ? camera angle ? point during play- SEARCH Displays MARKER SEARCH menu. audio language (DVD) or audio channel (CD). MARKER Marks any back. DISPLAY Accesses On-Screen menu, disthe video CD with PBC. setup ? PROGRAM Places a track on the program list. ? ZOOM Enlarges if ? available video image. REPEAT Repeat chapter, track, title, SETUP ? ? Accesses or removes setup all. menu. A-B Repeat ? RANDOM Plays ? sequence. * tracks in random order. This button is not available. 7 Rear Panel COAXIAL Connect (Digital audio out jack) to digital (coaxial) audio equipment. AUDIO OUT Connect to stereo (Left / Right) an amplifier, receiver, or system. VIDEO OUT Connect to a TV with video inputs. COMPONENT VIDEO OUT/PROGRESSIVE SCAN Connect to a TV with Y Pb Pr (Y Pb Pr) inputs. S-VIDEO OUT Connect to a TV with S-Video inputs. OPTICAL DIGITAL OUT Connect to (Digital audio out jack) digital (optical) audio equipment. AC Power Cord Plug Do not touch the inner into the power pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Remote Control Operation Point the remote control at the remote sensor and press the buttons. Remote Ccontrol AAA AAA Battery installation Detach the battery the remote control, and insert batteries cover on (size AAA) aligned correctly. Do not mix old and mix different with new the of two and batteries and types of batteries such standard, alkaline, etc. 8 rear never as source. Connections Tips Depending Progressive Scan (ColorStream Pro) If your television is high-definition or "digital ready" television, you may take advantage of the DVD Player's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections on described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect the player's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to Optional Equipment" on page 10. Caution -- -- -- Make directly to the TV. Tune the TV to the correct video input channel. Do not connect the DVD Player's AUDIO OUT jack to the phono in jack (record deck) of your audio system. Do not connect your DVD Player via your VCR. The DVD image could be distorted by the copy protection sure the DVD Player is connected 1 Make the of the in Connect the Left and jacks on the DVD Player jacks on the TV using the Right AUDIO OUT the DVD Player to the audio left/right (A) using the audio cables. in jacks of jacks on to the Notes -- -- -- on corresponding Pb Pr cable (C). TV to a TV following connections, depending capabilities of your existing equipment. one PROGRESSIVE SCAN Y 2 a Connect the COMPONENT VIDEO OUT/ the system. Connecting connection Set the Progressive to "On" on the setup progressive signal, see page 12. Set the Progressive to "Off" by removing menu for STOP and hold it for five seconds before relesasing it. analog video any disc from the unit and close the disc tray. See that "no disc" is displayed on the display window. Then press does not work with the Progressive scan connections (yellow VIDEO OUT jack) or S-VIDEO connection. Video connection 1 2 Connect the VIDEO OUT the video in jack on the Connect the Left and jack on the DVD Player to TV using the video cable (V). Right AUDIO OUT the DVD Player to the audio left/right (A) using the audio cables. TV in jacks of jacks on the S-Video connection 1 Connect the S-VIDEO OUT to the S-Video in cable 2 the TV the DVD using Right Player the S-Video AUDIO OUT the DVD Player to the audio left/right (A) using the audio cables. Component Video (Color Stream ) in jacks of jacks on the connection Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN the Pr 2 on on (S). Connect the Left and TV 1 jack jack corresponding cable (C). in Connect the Left and the DVD TV jacks on the DVD Player to jacks on the TV using an Y Pb Right AUDIO OUT Player to the audio left/right (A) using the audio cables. in jacks of jacks on the Note If the TV has input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. an S-video 9 PREATION Connections Connecting (Continued) Optional Equipment to Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and jacks on the DVD Player to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A). Right AUDIO OUT Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2, or DTS) Connect 1 one of the DVD Player's DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable. You will need to activate the 2 (See "Digital Digital Audio player's digital output. Output" on page 13). Multi-channel sound A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your DVD Player (MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver. Caution: Due to the DTS will be in DTS Licensing agreement, the digital output digital out when DTS audio stream is selected. Rear of DVD O player X OPTICAL A COAXIAL DIGITAL INPUT Amplifier (Receiver) 10 R L AUDIO INPUT If the audio format of the digital output does not match the -- capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. --To see screen the audio format of the current DVD in the display, press AUDIO. on- Before General This manual Operation Temporary Explanation basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc. gives On-Screen General screen. playback 1 2 3 status TRACK ALL AB OFF can displayed on the TV changed on the menu. can be an The selected item will be Press 1/2 to change The number buttons (e.g., title Repeat Chapter Repeat Track Repeat All Tracks Repeat A-B Repeat Off Action of press ENTER to execute the For or only) Video CDs only) point not available provide all of the features on the on-screen display example shown below. If no button is pressed for 10 seconds, the on-screen display disappears. an item. be also be used for number). (non-PBC from this prohibited Video CDs Some discs may not highlighted. setting play (non-PBC Notes item. the can Title be during playback. Press 3/4 to select Repeat Resume display operation Press DISPLAY numbers CHAPT Display Some items On-screen TITLE Feedback Field Icons some setting functions, setting. DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of titles, and skips to the desired title number. 1/3 Chapter Number 1 /12 Time search 0:20:09 Audio 1 ENG language and Digital Audio Output mode Subtitle language Angle 5.1 CH ABC OFF 1/1 Sound VCD2.0 D NORM. Shows the current chapter number and total number of chapters, and skips to the desired chapter number. Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting. Shows the current subtitles language, and changes the setting. Shows the current angle number and total number of angles, and changes the angle number. Shows the current sound mode, and changes the 1/2,or Numbers ENTER 1/2,or Numbers ENTER Numbers ENTER 1/2,or AUDIO 1/2,or SUBTITLE 1/2,or ANGLE 1/2 setting. VCD1.1 Items Function (Press 3/4 to select desired item) Track Number Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number. 1/4 Time 0:20:09 Shows the elapsed playing time (Display only) Shows the audio channel, and Audio Channel Sound Selection Method the audio channel. STER. changes NORM. Shows the current sound mode, and changes the Selection Method 1/2,or Numbers ENTER -- 1/2,or AUDIO 1/2 setting. 11 PREATION Before Initial You Operation (Continued) Settings set your can Picture Personal Preferences own on the player. TV Aspect 4:3 Letterbox: Select when nected. Initial General Settings Operation The setup Displays appears. Scan is Original Disc Subtitle English 16:9 Wide: Select when Disc Menu Spanish Rating German played cut off). Italian Code Country Portuguese Aspect Greek Language Audio Chinese Output will show the current item, well as as setting for the alternate setting(s). selected, press 2, then 3/4 to select the desired Press ENTER to confirm Some items selection. additional Press or PLAY to exit the menu. Language Language DVD for the disc's language a Disc Menu 16:9 Wide Aspect Language Menu, Audio, and Disc Subtitle English Disc Menu Spanish Rating German Disc Subtitle On Rating Country TV Aspect Menu Language Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan Output Chinese Other------------ Others Language Select a you see language to On in error, you must reset the unit. 1) for the setup menu. This is the menu when you press SETUP. Disc Audio English Disc Subtitle Spanish Disc Menu German Rating Italian TV Code Language Progressive 12 Greek Aspect Menu Portuguese Scan Remove any disc from the unit and close the disc tray. See that "no disc" is displayed on the display window. 2) Country Output Caution French Scan Audio Menu Audio Others Greek Language Progressive Scan Portuguese Aspect Digital Code Italian Code Country DVD Off Progressive Original Output Disc Audio Digital Menu Audio Disc Menu code, press CLEAR. Disc Audio Scan Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks, but are connecting the DVD Player to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. The TV Code Progressive Scan original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 24. If you enter the wrong language : Panscan Others Subtitle. Original 4:3 Digital 3 setting. your 4 require steps. SETUP, RETURN, 5 setup Select Disc Subtitle Progressive While the desired item is Disc Letterbox Menu Press 3/4 to select the desired item. selected sides of the 16:9 wide TV is connected. 4:3 TV Others screen a style (Both Disc Audio Country Other------------ The bars Rating French Scan Progressive 2 masking conventional TV set is back in that Disc Audio Digital a with con- connected. The video material formatted in the Pan & style picture are Menu standard 4:3 TV is images picture. 4:3 Panscan: Select when menu TV a theatrical above and below the Press SETUP. 1 DVD Press STOP and hold it for five seconds before releasing standard visible it. The video on a to the picture will once again be conventional analog TV or monitor. setting and output will be restored a Before Operation (Continued) Sound Others Audio Digital Output Each DVD disc has Set the The of audio variety output options. player's Digital Audio Output according to the a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" be DRC, Vocal, PBC and Auto Play settings changed. Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. if you connected the DVD Player's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- Disc Audio DRC On Disc Subtitle Vocal On ment with Disc Menu PBC On Rating Auto a Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if you connected the DVD other Player's DIGITAL OUT jack to an amplifier equipment with a DTS decoder, Dolby Digital decoder or or TV a 2-channel amplifier. The DVD Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM /PCM Rating Country TV Code Aspect Menu Progressive Digital Sample Freq. 48 KHz Language 96KHz Scan Audio Language Output Scan Audio Digital the Off Aspect Menu digital Play Code Progressive player outputs sounds in PCM 2ch format when you play a DVD video disc recorded on the Dolby Digital, MPEG1, or MPEG2 recording system. stereo Country MPEG decoder. PCM: Select when connected to can Output Others Dynamic Range Control (DRC) With the DVD program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set format, you can hear a DRC to On for this effect. Others Vocal Sample Frequency To Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing. change the Set Vocal to On only DVD is The karaoke channels playing. when multi-channel karaoke a on the disc will mix into normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. Auto You Play set up the DVD Player so a DVD disc automatstarts playing whenever the DVD is inserted. can ically If Auto Play search a play DVD mode is set to title that back the title On: Auto Off: Auto Play Play On, this DVD player will playback time automatically. is long most and then function is activated. function is not activated. Note The Auto Play function may not work for some DVDs. 13 PREATION Before Operation (Continued) Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain applies to the the disc. These scenes on disc complete or scenes are Code Code (See "Country are Disc Menu 6 Country TV Country TV Menu Progressive Digital Digital 1 1 Scan Audio Scan Audio Output Change Others Code Country the setup using Country 1 "Rating" on the Setup menu using the 3/4 buttons. 2 step 3 Select 4 Shift 5 6 selection, 3 of "Rating" second 2 While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- "Rating" tons to create is selected, press 2. personal 4-digit security password. then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passIf you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 cursor the code is Changing the 1 Follow 2 Enter the old 3 Select Steps 4-digit 1-2 shown above to the left as Change using 3/4 buttons then press ENTER. Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. 6 Press SETUP to exit the be played. Higher unless an rated alternative scenes scene is available The alternative must have the lower If will not be same on rating played If you If you 5 then press SETUP 14 menu. forget your 4-digit code forget 1 Press SETUP to or a 2 Use the Number buttons to enter the rating selection, display the setup menu. 6-digit number "210499". The 4-digit password is display for a moment. 3 to exit the menu. then press ENTER. code a second time and veri- 4-digit code, the disc. no Press ENTER to confirm your new your password, to clear the current password, follow the procedure below. suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. one. (Rating). code, then press ENTER. exactly the same fy by pressing ENTER. suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will is necessary when the 4-digit code" code Enter not 3/4 buttons. below.). 5 scenes the 3/4 buttons. button and select the 4-digit password changed (see "Changing Enter the 1 to 8: Some discs contain using Confirmation of the 4 Ratings left. Note rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. a on Press ENTER to confirm your country code then press SETUP to exit the menu. a word, then press ENTER. Select using 2 character using the on Code is selected, press 2. the first character Select the 3/4 buttons menu. Follow Unlock Output Select While 2 Language Language Others 3 Aspect Code Progressive 4 Code US Aspect Menu 5 Rating Code Set Rating 8 7 to the list Disc Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Disc Subtitle were List", page 25.). Disc Subtitle The Parental Control feature allows Disc Audio disc, referring Disc Audio rated whose standards country/area a used to rate the DVD video to from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are country-dependent. DVD Enter a new code as cleared. "P CLr" appears shown above to the left on the (Rating). Operation Playing a with DVD and Video CD Playback Setup Turn on the 1 DVD VCD2.0 the TV and select the video nected to the DVD Audio source Note VCD1.1 input source con- on the audio system and select connected to the DVD Unless stated Moving When 2 Load your chosen disc in the tray, with the playback side down. 3 Press OPEN/CLOSE to close the tray. READING appears on the TV screen, and automatically. If playback press PLAY. In some cases, the disc a another title Press playback The is Moving When or displayed may be displayed first after Video CD which offer a menu. loading a DVD Use the 1 234 buttons to select the want to view, then press ENTER Press TITLE or to can move to (0-9) to select a num- title number. to another CHAPTER/TRACK 1 /12 VCD1.1 a title title/chapter you start playback. DVD MENU to return to the on a 1/3 menu screen. disc has than more chapter/track menu screen DVD title, you DISPLAY, then press the appropriate disc has a menu screen one DVD appear instead. If than more 1/3 follows: as bered button does not start, might to another TITLE disc has DVD menu use player. Press OPEN/CLOSE to open the disc tray. starts otherwise, all operations described the remote control. Some features may also be available on the Setup menu. player. system: Turn input General Features DVD and Video CD one more than track, you one chapter can move or a to another follows: as Press SKIP . > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, or press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number the numbered buttons using (0-9). VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting and the exact operating procedures for depending on the disc. may differ Follow the instructions on the each using the menu screen. menu You also may set PBC to Off under 13. menu screen. setup. See page Note For two-digit numbers, press (0-9)in rapid succession. Search DVD 1 Press SCAN m The player will now 2 Press SCAN m Notes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized "Parental -- Control", DVDs may have a Your player will not different from your player is 5 (five). (see page 14). region code. on play discs that have a region code player. The region code for this VCD2.0 or M the numbered buttons VCD1.1 during playback. go into SEARCH mode. or M repeatedly to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, (backward) or MX2, MX4, MX8, (forward). 3 To exit SEARCH mode, press PLAY. 15 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD (continued) 1 To Frame-by-Frame playback VCD1.1 will during playback. now VCD2.0 DVD 1 Press PAUSE/STEP The recorder will now 2 To Video T 1/4 or PAUSE mode. mode. in reverse is not 2 To return to normal possible VCD2.0 during playback The "RANDOM" appears To repeat third time. screen. must set PBC to Off the on function. See page 13. Repeat DVD VCD2.0 VCD1.1 OFF sequence in a title: a 1 Press A-B at your chosen " * A in or the TV on stop mode. briefly appears on starting point. the TV screen. again press RANDOM the TV screen. on 1 Press DISPLAY screen. again. play appears 3 Within 10 the Random function. See VCD2.0 DVD TITLE TRACK VCD1.1 ALL - Repeat Chapter/Title/Off icon appears on the TV second time. Repeat mode, 4 Within 10 Repeat on on time of the to select the Time display. the number buttons to enter hours, minutes, and to confirm the start time. invalid This unit starts from the selected time time, playback the disc. If you enter will continue from the current point. DVD on VCD2.0 VCD1.1 the TV the TV 3D SUR can produce third time. screen. 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from screen. a a simulates multi-channel audio a sec- in the box. right seconds, press ENTER 1 Press DISPLAY press REPEAT Off icon appears elapsed playing If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. screen. repeat the title currently playing, press REPEAT Title icon appears dis- OFF REPEAT. Repeat use start time. Enter 3D Surround repeat the currently playing chapter, press Repeat Chapter on-screen seconds, onds from left to NORM. DVD Video Discs on-screen at screen. seconds, press 3/4 required Playback Repeat the playing The "-:--:--" appears in the Time Search box. the use on The during playback. Search icon in the during Random playback, the title (track) and resumes Random to -:--:-- current disc. SKIP > menu 0:20:09 DVD The Time Search box shows the an 2 Use 3 or The sound a home theater 4 to select the sound option system. during playback. will be option. highlighted. 3Use1or2totoselect"3DSUR". To turn off the 3D Surround 16 the TV on a The Time Search function allows you to start any chosen time on the disc. VCD1.1 page 13. The the Time Search OnaVideoCDwithPBC,youmustsetPBCtoOffon 3 To exit screen. at your chosen end point. "A B" appears briefly on the TV screen, and the repeat sequence begins ("AsB" appears the display window). Note This function only works with DVD Karaoke discs and video CD without PBC. The the TV on PBC, you AB 2 Press A-B playback. 2 To use A-B 2 Within 10 unit selects another The a with playback, The "NORMAL" appears 1 To screen. to select the M) Karaoke DVD 1 Press RANDOM CHAPT to menu A* mode, press PLAY (N). playback Random setup the TV 3 To cancel the sequence, press A-B. Note Slow motion Video CDs. the on press REPEAT Off icon appears Video CD with a Repeat (forward). 4. To exit Slow Motion Tips By pressing All icon appears Repeat mode, Repeat setup CD, the Slow speed changes: T 1/8, T 1/2 or Repeat The " a Track icon appears repeat the disc currently playing, press REPEAT 3 To exit On required speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward). With Repeat go into PAUSE mode. (m or M) during player will enter SLOW (m VCD1.1 (X) during playback. 2 Press SCAN 3 Use the SCAN The Note Slow Motion The DVD Track/All/Off Repeat repeat the track currently playing, press REPEAT. The go into PAUSE mode. 2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. player - second time. 1 Press PAUSE/STEP The Video CDs effect, select "NORM". or with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) Special during playback or still playback the repeatedly, discs: Menus to DVDs may offer menus that allow you to access special features. To use the disc menu, press DVD MENU. level magnification steps. 2 Use the 1 234 buttons to move the zoomed through picture. 3 Press CLEAR to the resume normal playback or the contents of DVD Video Checking activate the Zoom function. If you press ZOOM increases up to six return to paused image. Then, press the appropriate number button to select option. Or, use the 1 234 buttons to highlight your selection, then press ENTER. Title Menu 1 Press TITLE. screen. Note function may not work for zoom 2 The DVDs. some VCD2.0 DVD menu, the list menu can menu menu will appear may appear. angles, spoken language chapters for the title. camera options, and the title menu, press TITLE remove the on again. VCD1.1 Disc Menu MARKER SEARCH 1/9 a Otherwise, the disc and subtitle 3 To Marker Search an DVD If the current title has The DVD VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features DVD 1 Press DVD MENU. You can nine points To enter 1 start playback from memorized a point. Up be memorized. can 2 To is menu displayed. the disc menu, press DVD MENU remove again. mark, follow these steps. a disc playback, press MARKER when reaches the spot that you want to During playback Camera The Marker icon will appear Repeat step on the TV briefly. screen 1 to enter up to nine Marker points on a disc. To Recall DVD scenes 1/1 recorded at different camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. The number of the current Marked Scene a Angle If the disc contains memorize. 2 The disc to angle appears the on a display. 1 ENG 1 disc During playback, The MARKER SEARCH 2 Within 10 press SEARCH. menu will appear seconds, press 1/2 on to select a the screen. Marker 3 Press ENTER. will start from the Marked 4 To remove the MARKER SEARCH menu, press SEARCH. To clear 1 a During playback, The MARKER SEARCH 2 menu will appear on the screen. Press 1/2 to select the Marker number that you want to 3 Subtitles press SEARCH. VCD2.0 VCD1.1 repeatedly during playback to hear channel (STER., LEFT or RIGHT). DVD ABC a dif- 1 ENG Press SUBTITLE different subtitle a repeatedly during playback languages. to see the erase. Press CLEAR. Note The Marker number will be erased from the list. 4 the Audio Channel 5.1 CH to hear Press AUDIO ferent audio Marked Scene disc repeatedly during playback audio language or audio track. Changing scene. Language Press AUDIO different number that you want to recall. Playback Changing the Audio D DVD Repeat steps 2 and 3 to erase If appears, the feature is not available on the disc. additional Marker numbers. 5 To remove the MARKER SEARCH menu, press SEARCH. 17 OPERATION with Audio CD and MP3/WMA Disc Operation Playing Audio CD and MP3/WMA Disc MP3 CD The DVD ings an can play CD-ROM, CD-R on or MPEG1 audio CD-RW discs. playing MP3/WMA recordings, MP3/WMA Recordings on right. read the notes files that have on The on player About the TV go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 screen 1. 2. ".mp3". as Microsoft audio Media 3. Folder2 Folder3 Folder4 Folder5 Folder6 Clear All the MP3 format. compatibility 5. A to Creator", which single creates session disc 4 Playback starts. During playback, playback File elapsed playing move Press DVD MENU to menu. system. MP3/WMA files in the MP3/WMA file in the 1st playback names should be named incorporate ".mp3" e.g. "********.MP3" time will appear on the display window and Playback will stop at the end of the disc. Press TITLE to 6. requires no ISO9660 file an or use a new one. and must the current track's is MP3/WMA files. If you wish MP3/WMA files, format all the data in cannot the disc or player - track, it Press 3/4 to select a folder, and ENTER. A list of files in the folder appears. track then press PLAY with this follows: first track. If there is a offers double the audio Sampling Frequency / only at 44.1kHz (MP3), 22.05 44.1kHz (WMA) Bit rate / within 32 320kbps (MP3), 32 128kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "EasyCD Folder7 Press 3/4 to select ENTER. Audio) compression - Folder1 OFF file a - 4. Program 00:00 a MP3/WMA Disc Press 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. MP3 file that has an WMA(Window Media Audio) limited Folder8 not read technology. WMA(Windows compression of JPEG MP3 WMA can An WMA file is MP3 WMA 3 Recordings compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". extension other than Insert a disc and close the tray. Audio CD; Audio CD menu appears 2 MP3/WMA An MP3 file is audio data MP3/WMA formatted record- Before 1 on About MP3 WMA Player Notes or using or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. to the next page. move to the previous page. This DVD player requires discs/recordings to meet certain technical standards in order to achieve Program CD Program MP3 WMA TRACK01 TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK 5.mp3 TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 Clear All TRACK08 STER. 0: 56: 18 Audio CD NORM. menu MP3 Clear All TRACK 8.mp3 00:00 1 MP3/WMA list, are use in menu 5 18 file list and want to return to the Folder the 3/4 to return to the To a and highlight previous menu screen. stop playback at any other or are WMA conditions files). That require certain pre-existing (see above) to insure compatible playback. OFF Tip If you are many different types of recordable disc formats (including CD-R containing TRACK 4.mp3 TRACK05 Pre-recorded DVDs set to these standards. There TRACK 3.mp3 TRACK04 playback quality. optimal automatically press ENTER to time, press STOP. Customers should also note that required permission is in order to download MP3/WMA files and music from the Internet. Our company has no to grant such permission. Permission should always be sought from the copyright owner. right Operation Pause with Audio and MP3/WMA Disc MP3 CD 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To 1 press repeat Moving MP3 CD WMA > or briefly during playback to go to the next track beginning of the current track. or Press SKIP . twice step back briefly to case of audio CD, the track number to go using directly to any to the pre- track, the numbered buttons icon and "A Repeat enter (0-9) " appears Repeat 1 To Track/All/Off CD WMA repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears the on The begins to play repeatedly. Repeat icon and "OFF" appears 3D Surround can on the play, press menu screen. CD produce a 3D Surround effect, which playback from two conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from 1 Press DISPLAY menu menu screen. at your chosen end point. icon and "A B" appears on the menu screen, simulates multi-channel audio MP3 the on again Repeat This unit during playback. * 3 To exit the sequence and return to normal A-B again. vious track. In sequence. disc playback, press A-B at your chosen start- and the sequence to return to the CD a 2 Press A-B The Press SKIP . A-B During ing point. The to another Track (Continued) a home theater or system. during playback. screen. 2 To repeat all tracks on a disc, press REPEAT 2 Use 1 a sec- The sound ond time. The Repeat icon and "ALL" appears on the or 2 to select the sound option will be highlighted. 3Use3or4totoselect"3DSUR". menu screen. To turn off the 3D Surround 3 To cancel The Repeat mode, Repeat icon and "OFF" appears on the MP3 CD 1 Press SCAN m player will now 2 Press SCAN m third time. a menu screen. Changing M or WMA different the Audio Channel CD speed repeatedly during playback to hear a audio channel (STER., LEFT, or RIGHT). during playback. go into SEARCH mode. M or repeatedly to select the required speed: mX2, mX4, mX8 (backward) MX2, MX4, MX8 (forward). Search effect, select "NORM". Press AUDIO Search The press REPEAT option. and direction are indicated on the or menu screen. 3 To exit SEARCH Random mode, press PLAY. MP3 CD 1 Press RANDOM WMA during playback or when playback is stopped. The unit automatically begins "RAND." appears on 2 To return to normal edly until "RAND." the Random Playback and menu screen. playback, press RANDOM repeatdisappears on the menu screen. 19 OPERATION Operation Viewing with JPEG Disc JPEG disc a Moving JPEG Press SKIP . This DVD Player can play discs with JPEG files and Kodak picture CD. Before playing JPEG recordings, read the notes on JPEG Recordings on right. Insert disc and close the tray. The MP3/WMA-JPEG choice menu appears TV screen. 1 to another File or > to advance to the next file or Still Picture 1 Press PAUSE/STEP a on during viewing a picture to the previous file. once the The slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. player will during now MP3 WMA To JPEG the flip picture Press 3/4 2 during showing a picture picture horizontally or a vertically. Press 3/4 to select the JPEG then press ENTER. The JPEG menu appears on the TV To rotate screen. Press 1/2 JPEG Folder2 flip the picture during showing clockwise picture Folder1 to or a picture to rotate the counter clockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide 3 Speed Press 3/4 to select a folder, and ENTER. A list of files in the folder appears. Press RETURN to move to the MP3/WMA-JPEG choice menu. list, are " a file list and want to return to the Folder on the remote to highlight on be less than 650. If you want to view a particular file, press 3/4 to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts. that all the selected files have the During viewing a file, press RETURN the previous menu (JPEG menu). rename to move to to the next page. Press DVD MENU to move to the previous page. JPEG move Folder1 Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed 5/32 Off 1024X768 Picture5.jpg Tip There are three Slide Speed options: Fast, Off. Press 1/2 to highlight the Slide 3/4 to select the option you want to viewing Normal, Slow, and then press use, and press ENTER. Speed To stop viewing The JPEG 20 menu the disc should When you are using software such as Creator" to burn the jpeg files into the menu screen. Press TITLE to 5 --- Some disc may be incompatible due to different recording format or condition of disc. and press ENTER to return to the previous 4 in the 3/4 buttons use " display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen Total number of files and folders Tip If you upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on- Depending Off at any other appears. time, press STOP. when copying into the CD "Easy CD CD-R, ensure ".jpg" extensions layout. If the files have File them ".jpe" or ".jpeg" extensions, please as ".jpg" files. ".jpg" extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in windows explorer. names without Programmed Playback CD VCD2.0 with Audio CD Programmed Playback function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter during playback or in the Program Edit mode. on the stop E The with Video CD Note On a setup Video CD with menu to PBC, you the use must set PBC to Off on the function. See page 13. Program contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA Disc The MP3 VCD1.1 mark will appear to the right of the word the right side of the menu screen. Program OPERATION Insert Video CD and close the tray. 1 2 Press PROGRAM while The VCD Program menu is playback stopped. will appear. Program VCD E TRACK 1 TRACK 2 Note TRACK 3 Press PROGRAM to exit the Program Edit TRACK 4 mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 Program to place the list. Note Repeat step 2 Program list. 3 to place E Program CD additional tracks the Program MP3 WMA TRACK 1 TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 TRACK 7 TRACK 7.mp3 Clear All TRACK 8 0: 56: 18 STER. TRACK 3.mp3 4 Audio CD Clear All TRACK 8.mp3 NORM. 00:00 3 MP3/WMA menu OFF track you selected last is highlighted on 5 playing. The 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. To resume normal select a on the Program repeat all tracks REPEAT playback from track of CD programmed (or MP3/WMA) list disappears on the menu screen. the TV screen. Tracks on the program second time. a the menu Repeat mode, Erasing a Track from the on menu screen. press REPEAT icon and "OFF" appears Repeat list, press on icon and "ALL" appears Repeat on Program the a third time. menu screen. List 1 Press PROGRAM MP3/WMA disc Program and then press ENTER. "PROG." indicator list on screen. The Press PLAY to start. all of the tracks normal icon and "TRACK" appears Repeat To cancel to the next page. Press DVD MENU to move to the previous page. move Playback stops after have played once. resume repeat the track currently playing, press REPEAT. The Press TITLE to left. on playback from programmed playback, press PROGRAM. To Press 3/4 to select the track you want to start playback, To Repeat Programmed menu the program list. 7 Audio CD and MP3/WMA disc" To programmed menu. steps 2-6 of "Programmed Playback with The "NORMAL" appears Press 2. The Program TRACK 4.mp3 TRACK 5.mp3 TRACK 6.mp3 Follow PROGRAM to exit the or TRACK 2.mp3 TRACK 4.mp3 TRACK 6 Press RETURN 3 E TRACK 8.mp3 TRACK 5 4 on E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to from the Program list. erase 4 Press CLEAR. The track will be erased from the Erasing the 1 Follow steps List" as Complete Program 1-2 of "Erasing a list. List Track from Program above. 2 Use 3/4 to select "Clear The Program complete Program The programs are All", then press ENTER. for the disc will be erased. also cleared when the disc is removed. 21 Additional Information Last Condition DVD This CD player Controlling Memory remote control VCD1.1 memorizes the settings user for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the If you load a disc that has its settings memothe latest stop position is automatically recalled. player. rized, Notes -- -- Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play You can control the sound level, input source, and power switch of your LG TV with the supplied remote control. You can control the sound level, input code. While 1 appears when you leave the DVD Player in stop mode for about five minutes. After the Screen Saver has been engaged for about five picture screen saver minutes, the DVD Player will automatically turn itself off. down TV POWER holding button, press the number buttons to select the manufacturer code for your TV Screen Saver source, and well. If your TV is listed power switch of non-LG TVs as in the table below, set the appropriate manufacturer it. The other TVs with the the table (see below). Release TV POWER button. 2 Code numbers of controllable TVs If more them than one at code number is one a listed, try entering time until you find the one that works with your TV. Video Mode VCD2.0 DVD With certain ering or means Setting Manufacturer Code Number VCD1.1 LG / GoldStar 1 Zenith 1,3,4 Samsung 6,7 Sony 8,9 Hitachi 4 discs, the playback picture may be flick- Dot Crawl is shown Vertical interpolation on or lines. That straight De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the (Default), 2 video mode. To Note the video mode, press and hold DISPLAY change about 3 seconds during disc playback. The new video mode number selected is the TV displayed Check whether the video quality has improved. repeat the above procedure until picture quality improved. Video mode MODE1 → change MODE2 → on screen. → on function the MODE1 setting. MODE1: The or video source material) material of the DVD video (film material is determined from disc information. MODE2: Suitable for material recorded MODE3: Suitable atively playing film based content or video based by the progressive scan method. for playing video based content with compar- little motion. Set the appropriate code number again. System for Video Modes even When you replace the batteries of the remote, the code number you have set may be reset to the If you turn off the power, the video mode will be back to initial state (MODE1). Descriptions TV, all buttons may not after entering the correct some or If you enter a new code number, the code number previously entered will be erased. default Detailed on your TV, manufacturer code. If not, is sequence: MODE3 Depending Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold PAUSE on the front panel for more than 5 seconds to be able to select a system (PAL, NTSC, or AUTO). ? When the selected system does not coincide with the system of your TV, normal color picture may not be displayed. AUTO: Note The video mode setting only works when the Scan mode is set to "On" in the Setup menu. Progressive Select when DVD Multi NTSC: player is connected with player is connected with player is connected with system TV. Select when DVD NTSC-TV. PAL: Select when DVD PAL-TV. 22 Troubleshooting Check the following guide for the possible cause of a problem before service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does No disc is inserted. Insert that the DVD or, audio CD indicator in the display not work. No The TV is not set to receive DVD picture. signal output. a (Check window is lit.) Select the appropriate video input mode so the picture from the DVD on the TV player The video cable is not connected disc. cord into the wall outlet the TV on appears Connect the video cable screen. securely. securely. No sound. The connected TV power is turned off. Turn The Progressive Scan is set to "On" on the setup menu but is connected to a standard(analog) television. Set The Select the correct equipment connected with the audio cable is not set to receive DVD signal output. The audio cables not connected are the TV. on Progressive (see page 12). audio receiver Scan to "Off" input mode of the you can listen to the sound from the DVD player. so Connect the audio cable securely. securely. The power of the equipment connected with the audio cable is turned off. Turn The Set the Digital Audio Output wrong position. The playback picture is The disc is is set to the the on equipment connected with the audio cable. Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. Clean the disc. dirty. poor. The DVD not start does player playback. No disc is inserted. Insert disc. a (Check that the DVD, audio CD indicator in the DVD or display is lit.) An unplayable disc is inserted. Insert (Check the disc system, and Regional code.) playable a type, color The disc is placed upside down. disc. Place the disc with the playback side down. The disc is not placed within the guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the the The remote control The remote control is not does not work remote properly. sensor of the pointed DVD player. at the player. There is an obstacle in the remote control and the path of the DVD player. The batteries in the remote control are tray correctly Rating function or change level. Point the remote control at the remote sensor The remote control is too far from the DVD rating the disc guide. The disc is Rating on of the DVD Operate (7 m). player. the remote control within 23 ft Remove the obstacle. Replace the batteries with new ones. exhausted. 23 REF NC Language Code Enter the appropriate (See page 12). List code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 24 Country Code Enter the appropriate List code number for the initial setting "Country Code" (See page 14). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM SV El Salvador BB Barbados GI Gibraltar MN Myanmar Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF French Southern BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM USA CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape JP Japan PL Poland VI Virgin Virgin CX Christmas Island KE PM Saint Pierre and VN Vietnam CY Cyprus KG Kenya Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands DE Barbuda Verde Republic Georgia & S. Sandwich (USA) Islands Anguilla Mayen Islands Republic Principe Te r r itories (French) Tobago Kingdom Minor Outlying Islands Miquelon (French) City State Grenadines Islands Islands (British) (USA) 25 REF NC Specifications General Power requirements AC 110-240V Power consumption 12W Dimensions Mass (approx.) , 50/60 Hz 430x39x242mm(WxHxD)withoutfoot 2.2 (approx.) kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% System Laser Semiconductor Signal system PAL/NTSC Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response laser, wavelength 650 nm CD:8Hzto20kHz ratio Signal-to-noise More than 100dB (ANALOG Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB OUT connectors only) (DVD) (CD) Outputs VIDEO OUT 1 V S-VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative (C)0.3V(p-p)75Ω COMPONENT VIDEO OUT (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio output (digital audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 3 V Audio output (analog audio) 2.0Vrms(1KHz,0dB),600Ω,RCAjack(L,R)x1 (p-p), (p-p), 75 Ω, sync 75 Ω, negative, Optical RCA jack x 1 sync, Mini DIN connector x 4-pin x x 1 1 1 Accessory Videocable.......................1 Audiocable.......................1 Remotecontrol....................1 Battery..........................2 Design and specifications are Manufactured under license from subject Dolby to change Laboratories. without notice. "Dolby", "Pro Logic", and the double-D Laboratories. DTS and DTS 26 Digital Out are registered trademarks of Digital Theater Systems, Inc. symbol are trademarks of Dolby P/NO : 3834RD0041R
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project