LG | LAB-M7500 | LG LAB-M7500 Owner’s Manual

LAB-M7500(ENG)_33B
Car CD/Cassette Combo Receiver
OWNER’S MANUAL
MODEL : LAB-M7500
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Table of Contents
Remote Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operation with Audio CD, MP3 Disc and CD changer . . . . . 15-16
Playing an Audio CD and MP3 Disc . . . . . . . . . . . . . . . . . 15
Playing a CD changer (OPTIONAL) . . . . . . . . . . . . . . . . . 15
TAPE Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Auto Music Search (AMS) . . . . . . . . . . . . . . . . . . . . . . . .17
TAPE INTRO SCAN (SCAN) . . . . . . . . . . . . . . . . . . . . . .17
PREPARATION
REFERENCE
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
INTRODUCTION
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
OPERATION
Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-13
Turning the unit on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the unit off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting a source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Checking the clock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SOUND Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Radio Operation . . . . . . . . . . . . . . . . . . . . . . . .
Listening the radio stations . . . . . . . . . . . . .
Auto Search Memory . . . . . . . . . . . . . . . . . .
Storing and recalling broadcast frequencies .
2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
14
14
14
14
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
Warning: To reduce the risk of fire or electric shock, do not
expose this product to dripping or splashing water, rain, or
moisture.
CAUTION:
This unit employs a Laser System.
To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference should the unit require maintenance, contact an authorized service location (see service procedure).
Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
Caution: Protect this product from moisture.
Caution: If the battery is disconnected or discharged, the preset
memory will be erased and must be reprogrammed.
3
INTRODUCTION
Warning: To reduce the risk of electric shock, do not remove the
cover or back of this product. There are no user-serviceable
parts inside. Refer servicing to qualified service personnel.
Before Use
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference.
Symbol Used in this Manual
The lightning flash symbol alerts you to the presence of
dangerous voltage within the product enclosure that may
constitute a risk of electric shock.
Indicates hazards likely to cause harm to the unit itself or
other material damage.
NOTE
Indicates special notes and operating features.
TIP
Indicates tips and hints for making the task easier.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the
edges so that fingerprints do not get on the surface. Never stick
paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not expose the disc to
direct sunlight or sources of heat and never leave it in a parked
car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality
and sound distortion. Before playing, clean the disc with a clean
cloth. Wipe the disc from the center out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older
vinyl records.
This unit cannot be operated by 8cm disc
(using 12cm disc only).
4
8 cm
Before Use
Use and care of the remote control
Point the remote control in the direction of the front panel to
operate.
NOTES
• The remote control may not function properly in direct sunlight.
• Do not store the remote control in high temperatures or sunlight.
• Do not let the remote control fall onto the floor, where it may become
jammed under the brake or accelerator pedal.
Handling the Unit
• This unit is designed to be operated on a 12 volt DC negative
ground electrical system only.
• When replacing the fuse, be sure to use the fuse whose amperage rating is identical. Use of a fuse with higher amperage may
cause serious damage to the unit.
• Periodically wipe the contacts on the back of the front panel with
a cotton swap moistened with alcohol.
NOTES
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not used for long.
• Do not recharge, disassemble, heat or dispose of the battery in fire.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
• In the event of battery leakage, wipe the remote control
completely clean and install a new battery.
5
INTRODUCTION
Installing the battery
Pull the tray outward on the back of the remote control with a
pencil or ball point pen and insert the battery with the plus (+)
minus (-) poles pointing in the proper direction.
Using the remote control
Before Use
Protecting your unit from theft
Attaching the front panel
The front panel can be detached from the head unit and stored in
the protective case provided to discourage theft.
1. Press RELEASE
D
to open the front panel.
C
B
A
RELEASE (
)
1. Join A on the front panel to
2. Join C on the front panel to
the front panel to left.
3. Close the front panel
2. Push the front panel to right.
3. Pull the front panel.
4. Put the front panel into the protective case provided for safe
keeping.
Protective case
Front panel
6
B
D
on the main unit.
on the main unit while pushing
NOTES
• When detaching or attaching the front panel, do not press the
display or control buttons.
• The control buttons may not work properly if the front panel is
not attached properly. If this occurs, gently press the front panel.
• Do not leave the front panel in any area exposed to high temperatures or direct sunlight.
• Do not drop the front panel or otherwise subject it to strong
impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the front panel.
• Do not try to disassemble the front panel.
Front Panel
1
2
3
4
5
6
8
7
9
10
20
21
INTRODUCTION
19
1
2
3
4
5
6
7
8
9
10
11
18
17
16
15
14
MUTE button
RELEASE ( ) button
• VOLUME KNOB
• CONTROL UP/DOWN dial
REMOTE SENCER
CD/CDC(OPTIONAL) button
DISPLAY WINDOW
SELECTION (SEL) button
EQUALIZER (EQ) button
XDSS button
• AUTO MUSIC SEARCH (AMS) button
./>) button
• CD SKIP/SEARCH(.
./>) button
• TAPE REWIND/FAST FORWARD (.
• TUNE (-/+) button
• DISPLAY (DISP) button
AUTO STORE/PRESET SCAN (AS/PS) button
13
12
12
23
11
16
• MP3 TRACK +10 (+D) button
• MP3 TRACK -10 (-D) button
SHUFFLE (SHF) button
REPEAT (RPT) button
INTRO SCAN (SCAN) button
CD PLAY/PAUSE (
) button
17
POWER button
18
BAND button
• TAPE button
• TAPE direction (bB) button
13
14
15
19
12 , 13 , 14 , 15 , 16
22
Preset Station buttons (1-6)
20
CD disc slot
21
CD EJECT (Z) button
22
TAPE slot
23
TAPE EJECT (Z) button
7
Remote Control
1
• POWER/MUTE ( )
- Switches the unit ON
and OFF.
- Press to mute the
sound from the
speaker.
2
FUNCTION (FUNC.) button
Selects a function.
3
• 0-9 number buttons
- Preset Station buttons (1-6)
B/X)
• PLAY/PAUSE (B
- Starts playback.
- Pauses playback temporarily.
- Reverse playback (TAPE).
• SCAN
- Plays the first 10 seconds of all track.
• REPEAT (RPT)
- Plays tracks repeatedly.
• SHF
- Plays tracks in random order.
5
1
6
2
3
7
4
8
. m / M >)
• SKIP/SEARCH (.
- Backward or forward
search playback.
- Go to next track.
Returns to beginning of
current track or go to
previous track.
- Select the desired frequency
• DISC SELECTOR (D-/D+) button
(Optional)
• MP3 Track -10/+10 (D-/D+)
4
• BAND
- Selects three FM and MW (AM) bands.
•bB
- It select direction of the cassette.
5
• SEL
- Enters the audio settings.
• NUMBER (#)
- To play a file directly, press NUMBER
(#) button and then press the track
number with 0-9 number buttons.
6
VOLUME ( / )
Adjusts the volume level.
7
• CLOCK (CLK)
- Clock display.
• DISPLAY (DISP.)
- Changes the display.
Installation
Basic Installation
PREPARATION
Bend the claws
according to
the thickness
of the
dashboard
Before installing, make sure that the ignition-switch is set to OFF and remove
the terminal of the car battery to avoid short-circuiting.
1. Remove the existing receiver unit.
2. Make the necessary connections.
3. Install the installation sleeve.
4. Install the unit in to the installation sleeve.
Removing existing receiver unit
If there is already an installation sleeve for the receiver unit in the dashboard, it
must be removed.
When removing the unit from the installation sleeve
A
If you need to remove the unit from the installation sleeve, proceed as follows.
1. Remove the rear supporter from the unit.
A
2. Remove the front panel and trim ring from the unit.
3. Insert the lever A into the hole on one side of the unit. Do the same operation on the other side and pull out the unit from the installation sleeve.
1
ISO-DIN Installation
1. Slide the unit into ISO-DIN frame.
3
2. Install screws removed from old unit.
4
3. Slide the unit and frame into dash opening.
5
4. Install dash panel or adapter plate.
5. Install trim ring to the unit.
2
6
6. Install faceplate by fitting right edge into position then pushing left edge
closed.
9
Connections
Connecting to Car
Before connecting, make sure that ignition switch is set to OFF, and remove the
terminal of the battery to avoid short circuits.
+
+
+
OPTIONAL
+
+
+
+
A
E
1
not supplied
CD CHANGER
(optional)
GND (BLACK)
B
C
4
DIMMER SWITCH (OPTIONAL)
2
DIMMER (ORANGE) :
OPTIONAL
3
TO IGNITION (RED)
TO BATTERY
FILTER BOX
5
IGNITION
SWITCH
(YELLOW)
15A
BATTERY
PWR ANT (BLUE)
1
POWER
ANTENNA
CONTROL
RELAY
6 REMOTE ON (BLUE/WHITE
10
STRIPE)
POWER AMPLIFIER
(optional)
1
2
2
3
3
4
4
5
6
D
5
6
7
7
8
8
VIOLET (FL +)
VIOLET/ BLACK STRIPE (FL -)
GRAY (FR +)
GRAY/ BLACK STRIPE (FR -)
GREEN (RL +)
GREEN/ BLACK STRIPE (RL -)
BROWN (RR +)
BROWN/BLACK STRIPE (RR -)
Connections
Connecting to Car
Connecting to Auxiliary Equipment
From antenna
- Connect the AUDIO OUTPUT connector of this unit to the
AUDIO INPUT connector of Auxiliary Equipment.
2. ORANGE : This lead is for connection to the Dimmer line.
This lead is for connection to the terminal from
which the power is supplied when the ignition
switch is set to ACC.
4. YELLOW : This lead is for connection to the Battery
(back-up) terminal from which the power is
always supplied.
5. BLUE : This lead is for connection to the power antenna.
6. BLUE/WHITE STRIPE : This lead is for connection to the
amplifier remote on.
Connect the CD changer
• Your car receiver works as control unit for a CD changer
which you can buy, if not yet done, later.
• The suitable cord shown on the scheme will be provided
together with the CD changer.
+
+
+
3. RED :
PREPARATION
To the wiring of vehicle Colors of leads
1. BLACK : This lead is for connection to the Ground.
(OPTIONAL)
+
+
+
+
To AUDIO OUT
To AUDIO IN
Right
Left
Speaker Connections
L
D
1
2
3
4
5
6
R
FRONT
L
R
REAR
7
8
11
Basic Operation
Turning the unit on
Adjusting the volume
Press POWER or any other button on the front panel or
POWER/MUTE ( ) on the remote control to turn the unit on.
Use VOLUME to adjust the sound level.
Rotate VOLUME KNOB on the front panel to increase or
decrease the volume.
Press VOLUME ( / ) on the remote control to increase or
decrease the volume.
Turning the unit off
• Press POWER on the front panel to turn the unit off.
• Press POWER/MUTE ( ) on the remote control for more than
1.2 second to turn the unit off.
Selecting a source
You can select a source you want to listen to.
• Press CD/CDC(OPTIONAL), BAND and TAPE to select a
source.
• Press FUNC. to select a source.
• Press FUNC. repeatedly to switch between the following
sources:
Tuner → CD → CD Changer (optional) → TAPE → Tuner...
NOTE
• When you turn off, the unit is memorized automatically the current
volume level before you turn off. Whenever you turn on the unit, it will
operate at the memorized volume level.
12
Setting the clock
1. Press DISP or CLK and press DISP for more than 1 second.
(Clock indicator will be displayed for 5 seconds. Adust the clock
within 5 seconds.)
2. Press > on the front panel to adjust the hour.
3. Press . on the front panel to adjust the minute.
4. Press DISP or CLK.
Checking the clock
You can see the clock pressing DISP or CLK.
Basic Operation
SOUND Adjustment
Using the EQ (Equalizer)
Here is a list of the equalizer curves:
•
•
•
•
•
•
•
EQ
EQ
EQ
EQ
EQ
EQ
EQ
POP : Reproduces the acoustics of pop music.
CLASSIC : Reproduces the acoustics of orchestral music.
ROCK : Reproduces the acoustics of rock music.
JAZZ : Reproduces the acoustics of jazz music.
VOCAL: Reproduces the acoustics of vocal music.
USER 1 : Selects an initial user mode.
USER 2: Selects an initial user mode.
1. Press EQ on the front panel to select the equalizer.
2. Press EQ repeatedly to select among the following
equalizer.
POP → CLASSIC → ROCK → JAZZ → VOCAL → USER EQ1
→ USER EQ2 → FLAT (No display) → POP....
MUTE
Turn right
VOL
BAS
MID
TRB
BAL
FAD
Press XDSS button to reinforce treble, bass and surround effect.
Increase the volume level.
Decrease the volume level.
Increase the bass level.
Decrease the bass level.
Increase the Middle level.
Decrease the Middle level.
Increase the Treble level.
Decrease the Treble level.
Decrease the level of the left speaker(s). Decrease the level of the right speaker(s).
Decrease the level of the front speaker(s). Decrease the level of the rear speaker(s).
1. WAY
1.
Select the USER EQ1 or USER EQ2 using the EQ button
2.
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, bass, middle treble, balance and fader. The mode indicator
lights up in the following order.
VOL
3.
BAS
MID
TRB
BAL
FAD
Turn left or right CONTROL UP/DOWN (or press VOLUME (
remote control) to adjust the sound quality.
/
) on the
2. WAY
1.
1. Press MUTE [POWER/MUTE ( )] to cut the sound.
2. To cancel it press MUTE [POWER/MUTE ( )] again.
XDSS (Extreme Dynamic Sound System)
Turn left
Press the SELECTION (SEL) button repeatedly to select the mode you want to
adjust from volume, balance and fader. The mode indicator lights up in the following order.
VOL
2.
BAL
FAD
Turn left or right CONTROL UP/DOWN (or press VOLUME (
remote control) to adjust the sound quality.
/
) on the
NOTE
The unit can adjust the bass, middle and treble in the USER EQ1
or USER EQ2.
13
OPERATION
The equalizer lets you adjust the equalization to match car interior
acoustic characteristics as desired.
There are 7 stored equalizer curves which you can easily recall at
any time.
SELECTION (SEL) Button
Radio Operation
NOTES
Listening the radio stations
1. Press POWER/MUTE ( ) [POWER on the front panel] button
to turn the unit on.
- When you select a source the unit is turned on.
2. Press FUNC. or BAND button to select the tuner.
3. Press BAND button to select a band.
- Press BAND button until the desired band is displayed, FM1,
FM2, FM3, MW(AM).
4. To perform seek tuning, pressing the TUNE(-/+) or . m /
M > for more 1 second.
- The tuner will scan the frequencies until a broadcast strong
enough for good reception is found.
- You can cancel seek tuning by pressing either the
TUNE(-/+) or . m / M > with quick presses.
5. To perform manual tuning, press the TUNE(-/+) button with
quick presses.
- The frequencies move up or down step by step.
NOTE
• When the selected frequency is being broadcast in stereo, “
indicator will light.
”
• The presetting is not performed if there is no station to be tuned in.
• When the automatic presetting is performed, the previous
preset stations are automatically erased.
• To stop the automatic presetting, press BAND or AS/PS button.
toring and recalling broadcast frequencies
You can easily store up to six broadcast frequencies for later recall
with the touch of a button.
1. Select the desired frequency
2. Press one of the preset station buttons (1 - 6) for more than 1
seconds. The number of the pressed preset station button is
displayed.
3. Repeat steps 1 and 2 to preset other stations.
NOTES
• As F1, F2, F3 have the same frequency range, up to 18 station can be
preset for FM.
• When a station is preset on the preset station button on which another
station of the same band has already been preset, the previously preset
station is automatically erased.
Auto Search Memory
To scan the preset stations
This function lets you automatically store the six strongest
broadcast frequencies.
Press AS/PS button on the front panel.
To stop the scanning, press AS/PS button.
1. • Press BAND button to select the tuner.
• Press FUNC. button to select the tuner.
2. Press AS/PS button on the front panel for about 1 second.
- The scanning starts from the currently displayed frequency to
higher frequencies and stops when 6 stations have been
preset or the receivable frequencies have been scanned once.
14
To tune in the preset stations
Press BAND to select the desired band and press the desired
number buttons (1-6) on the remote control.
The number of the preset station button is displayed and the
preset station is received.
Operation with Audio CD, MP3 Disc and CD changer
Playing an Audio CD and MP3 Disc
CD
Pause
MP3
To play a file directly, press NUMBER (#) button and then press
the track number with 0-9 number buttons.
Playing a CD changer (OPTIONAL)
Playback Setup
CDC
MP3
CDC
B/X) during playback.
1. Press PLAY/PAUSE (B
B/X) again.
2. To return to playback, press PLAY/PAUSE (B
Moving to another Track
CD
MP3
CDC
Press the . / > on the front panel or . m / M >
on the remote control briefly during playback to go to the next
track or to return to the beginning of the current track.
Press the . on the front panel or . m on the remote
control twice briefly to step back to the previous track.
(If playing times is in less then 3 seconds and then this function is not
operated.)
CDC
Connect the CD Changer connector of this unit to connector of
this CD Changer on page 10.
Audio system: Turn on the audio system and select the input
source connected to the unit.
1. Press POWER or POWER/MUTE ( ) to turn the unit on.
2. • Select the CD changer function press CD/CDC(OPTIONAL).
• Select the CD changer function pressing FUNC. repeatedly.
3. Insert a disc you want to play into the magazine.
Playback starts automatically.
Moving to another Disc
Search
CD
CDC
Press and hold the . / > on the front panel or . m /
M > on the remote control for about 1 second during playback and then release at the point you want.
NOTE
If a disc is not inserted in the CD disc slot, press the CD EJECT
(CD) button.
CDC
Press (-D/+D) briefly during playback to go to the next disc or
step back to the previous disc.
15
OPERATION
The unit can play MP3 formatted recordings on CD-ROM, CD-R or
CD-RW discs.
Before playing MP3 recordings, read the notes on MP3
Recordings on page 19.
CD
Operation with Audio CD, MP3 Disc and CD changer
MP3 TRACK -10/+10
Repeat
1. a. Press RPT during playback.
CD
MP3
CDC
The “RPT” appears in the display window.
(It is played repeatedly the whole music within disc)
Intro scan
b. Press and hold RPT during playback. CDC
The “DRT” appears in the display window.
(It is played repeatedly the whole music within disc of CD changer)
2. Press RPT again.
b. Press and hold SCAN. CDC
The “DSN” appears in the display window.
Random
CDC
(It is played redomly the whole music within disc)
b. Press and hold SHF during playback. CDC
The “DSF” appears in the display window
(It is played redomly the whole music within disc of CD changer)
2. Press SHF again.
The “SHF” disappears in the display window.
(The random playback is cancelled.)
NOTE
• During random playback, if you press
the previous track
16
MP3
CDC
1. a. Press SCAN. CD
The “SCAN” appears in the display window.
(It is played first 10 seconds of the whole music within disc)
The “RPT” disappears in the display window.
(The repeat mode is cancelled.)
MP3
1. a. Press SHF during playback. CD
The “SHF” appears in the display window.
Durning playback, press the -10 (-D)
button to go back to the previous 10th track, and press +10 (+D)
button to go forward to the next 10th track.
button to don’t go back to
(It is played first 10 seconds of the whole music within disc of
CD changer)
2. Press SCAN again.
The “SCAN” disappears in the display window.
(The intro scan is cancelled.)
ID 3 TAG
MP3
When playing a disc containing information, you can see the
information (ID3 TAG, Title, Artist and Album) in the display window. If there is no information, “NO ID3 TAG” will be shown in the
display window.
Press twice the DISP button during MP3 file playback.
TAPE Operation
Basic Playback
1. Open the front panel by pressing RELEASE (
) button.
For your reference
To play the TAPE during other function (CD or RADIO) operation,
press TAPE button. (The TAPE is played automatically.)
This unit is equipped with a function that allows you to sip forward
or backward to locate the beginning of a particular selection on the
tape.
1. Press the AMS button during playing.
“AMS-P” indicator will be shown in the display window.
M] button during playing.
2. Press the ]m/M
3. Adjust the volume by turning CONTROL UP/DOWN dial.
The cassette deck will search for and play the next(or before)
track.
- To cancel, press the AMS button again.
Auto Reverse function
TAPE INTRO SCAN (SCAN)
The tape direction is reversed automatically when the tape end
has been reached.
This tape intro scan helps to find a program by playing about the
first 10 seconds each selection.
To select Tape Direction
Press the SCAN button during play to start scan operation.
(“SCAN” indicator will be shown in the display window.)
The tape direction can be reversed by pressing TAPE (bB) button.
- To cancel, press the SCAN button again.
To play rewind and fast forward
Press the TAPE REWIND/FAST FORWARD (]m/M]) button during playing a tape.
To ejecting Tape
Open the front panel by pressing RELEASE ( )
button and then press the TAPE EJECT (TAPE) button.
(If you eject the tape during tape playback, the
previously function (CD or RADIO) is played.)
17
OPERATION
2. Insert a cassette tape with the exposed tape side to the
right.
If radio broadcast is being received, the cassette tape plays
automatically.
Auto Music Search (AMS)
Troubleshooting
Cause
Symptom
Leads and connector are incorrectly connected.
The fuse is blown.
Noise and other factors are causing the built-in
microprocessor to operate incorrectly.
The unit does not
operate correctly even
when the appropriate
remote control buttons
are pressed.
Battery power is low.
Some operations are prohibited with certain
discs.
Playback is not
possible.
The disc is dirty.
The loaded disc is a type this unit cannot play.
Clean disc.
Check what type the disc is.
No sound are heard.
The volume level will
not rise.
Cables are not connected correctly.
Connect the cables correctly.
There’s no sound.
The volume level is low.
Adjust the volume.
There’s audio skipping.
This unit is not firmly secured.
Secure this unit firmly.
Power doesn’t turn on.
The unit doesn’t
operate.
18
Correction
Confirm once more that all connections are correct.
Rectify the reason for the fuse blowing, then replace
the fuse. Be very sure to install the correct fuse with
the same rate.
Turn the unit off and then on.
Load new battery.
Check using another disc.
Specifications
MP3 Disc compatibility with this unit is limited as
follows:
Sampling Frequency / 22.05 - 48kHz (MP3),
Bit rate / within 16 - 320kbps (include VBR) (MP3),
CD-R/CD-RW physical format should be “ISO 9660”
If you record MP3 files using the software which cannot create
a FILE SYSTEM, for example “Direct-CD” etc., it is impossible
to playback MP3 files. We recommend that you use “Easy-CD
Creator” which creates an ISO9660 file system.
5. Folder or File names should have a maximum 22 letters or less.
ID3 TAG: Title, Artist or Album names should have a maximum
30 letters or less.
The file must incorporate “.mp3” extension e.g. “********.MP3”.
Customers should also note that permission is required in
order to download MP3 files and music from the Internet. Our
company has no right to grant such permission. Permission
should always be sought from the copyright owner.
FM tuner
Frequency Range . . . . . . . 87.5-107.9MHz or 87.5-108 MHz or
65-74 MHz, 87.5-108 MHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0%
Usable sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 dBµV
MW(AM) tuner
Frequency Range . . . . . . . . . . . .520-1720kHz or 522-1620 kHz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0%
Usable sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 dBµV
CD
Frequency Response . . . . . . . . . . . . . . . . . . . . . .40 - 20000 Hz
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 dB
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.15%
TAPE
Tape Drive System . . . . . . . . . . . . . . . . . . . . .Full Auto Reverse
Tape Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,75 cm/sec.
Wow/Flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.3 % (WRMS)
S/N Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 dB
Frequency/Response . . . . . . . . . . . . . . . . . . . . .125 ~ 10000 Hz
Distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 %
Design and specifications are subject to change without notice.
19
OPERATION
1.
2.
3.
4.
General
Output Power . . . . . . . . . . . . . . . . . . . . . . . .50W x 4CH(Max.)
Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC 12V
Speaker impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Ω
Ground System . . . . . . . . . . . . . . . . . . . . . . . . . . .Negative type
Dimensions (W x H x D)188 x 58 x 178 mm (Without Front Panel)
Net Weight (approx.) . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.85 kg
P/NO : 3834RR0033B
Download PDF

advertising