DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V8826W PAL Before adjusting this product, booklet carefully and connecting, operating please read completely. this instruction or Safety Precautions/Important notes on controlling this unit SERIAL NUMBER: The serial number is found CAUTION this unit. This number is unique on the back of to this unit and not available to others. RISK OF ELECTRIC SHOCK DO NOT OPEN Model No. Serial No. CAUTION: TO REDUCE THE RISK ___________________________________ ___________________________________ OF ELECTRIC SHOCK DO NOT REMOVE COVER IMPORTANT SAFETY NOTICE (OR BACK) NO USER-SERVICEABLE PARTS INSIDE The cord grip for the plug fitted to this product is built into the existing power cord as supplied. if, for any reason you REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. need to shorten the cord. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. The exclamation mark within is intended to alert the user equilateral triangle an to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO REDUCE THE RISK OF FIRE OR ELEC- TRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT RE-USE THE PLUG. A plug must be used to ensure your continued safety by securing the plug to the power cord in accordance with Plug & Socket Regulations 1994. new CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. Features: CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT ? Complete versatility Tapes. ? Watch LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER ? ? CAUTION: This To Digital Video Disc Player employs ensure manual proper use of this a Laser System. ? require maintenance, contact see service procedure. an unit authorized service location- Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. dripping such as apparatus shall on exposed to water, objects filled with liquids, copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyright material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 recording a or VHS TV show to the VCR. Remote controls both DVD and VCR decks. Records from DVD to VHS with Macrovision). (unless DVD is copy protected Hi-Fi Stereo VCR. Important notes on controlling this unit This unit uses one set of controls to operate both DVD and VCR. The following buttons are helpful in successfully controlling each part. 1 not be splashing and that no vases, shall be placed on the apparatus. or Notes DVD while play DVD, VCDs, audio CDs product, please read this owner's carefully and retain for future reference, should the CAUTION: The a to 2 POWER Button Press the POWER button on the remote control front panel to turn on this unit. or DVD Button Press DVD button on the remote control when you want to control the DVD. VCR Button 3 Press the VCR button the remote control when you want to control the VCR. The VCR indicator will light on the front panel display to show that the VCR is selected. 4 on DVD/VCR button Press the DVD/VCR button on the front panel to toggle control between the DVD and the VCR. Table of Contents Introduction SafetyPrecautions.........................2 2 Important notes on controlling this unit. . . . . . . . . TableofContents..........................3 BeforeUse..............................4-5 PlayableDiscs...........................4 Precautions.............................5 NotesonDiscs..........................5 AboutSymbols..........................5 .6 FrontPanelandDisplayWindow. . . . . . . . . . . . . RemoteControl............................7 RearPanel................................8 Preparation Connections............................9-10 ConnectingtoaTV.......................9 .10 ConnectingtoOptionalEquipment. .11-15 BeforeOperation-VCRpart. .11 TuninginavideochannelonyourTV. .11 UsingyourVCRfortheveryfirsttime. SettingtheclockManually.................12 Tosetthecoloursystem..................12 Howtousingthemainmenu...............13 .13 TuninginTVstationsAutomatically. .14 TuninginTVstationsManually. .15 ChangingtheorderofTVstations. DeletingTVstations......................15 .16-19 BeforeOperation-DVDpart. GeneralExplanation......................16 On-ScreenDisplay.......................16 InitialSettings........................17-19 17 Initial Settings General Operation. Language..........................17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Picture.............................17 Sound.............................18 Others............................18 ParentalControl......................19 Operation OperationwithTape.....................20-22 Playingatape..........................20 .20 CM(CommercialMessage)Skip. .20 OPR(OptimumPictureResponse). .21 InstantTimerRecording(ITR). 22 Timer recording using On Screen Display. .23-25 OperationwithDVDandVideoCD. PlayingaDVDandVideoCD...............23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GeneralFeatures........................23 MovingtoanotherTITLE...............23 23 Moving to another CHAPTER/TRACK . . . . . . . . . . 26-27 . . . . . . . . . . 26 .26 Pause.............................27 MovingtoanotherTrack...............27 RepeatTrack/All/Off..................27 Search.............................27 Random...........................27 RepeatA-B.........................27 3DSurround........................27 .27 ChangingtheAudioChannel. OperationwithJPEGDisc...................28 ViewingaJPEGdisc.....................28 MovingtoanotherFile.................28 . . . . . . . . . . StillPicture.........................28 Toflipthepicture.....................28 Torotatepicture......................28 .28 NotesonJPEGRecordings. ProgrammedPlayback.....................29 Programmed Playback with Audio CD and . . . . . . . . . . . MP3/WMAdisc.........................29 .29 ProgrammedPlaybackwithVideoCD. .29 RepeatProgrammedTracks .29 ErasingaTrackfromProgramList. .29 ErasingtheCompleteProgramList. .30-31 AdditionalOperation-VCRpart. OnScreenDisplay.......................30 TapeCounterMemoryStop................30 Lock(ChildLock)........................30 .30 VideoDoctor(Self-Diagnosis). Hi-FiStereoSoundSystem................31 .32 AdditionalOperation-DVDpart. LastConditionMemory...................32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ScreenSaver...........................32 VideoModeSetting......................32 SpecialRecording.........................33 CopyingfromDVDtoVCR.................33 33 Recording from another video recorder . . . . . . . Reference Your TV with the Supplied Remote Control..................................34 Controlling Troubleshooting..........................35 LanguageCodeList.......................36 CountryCodelist.........................37 Specification.............................38 . SlowMotion.........................23 24 Still Picture and Frame-by-Frame Playback Search.............................24 Random...........................24 . Operation with Audio CD and MP3/WMA Disc Playing an Audio CD and MP3/WMA Disc NotesonMP3/WMARecordings. About the . Repeat............................24 RepeatA-B.........................24 TimeSearch........................24 3DSurround........................24 Zoom..............................25 MarkerSearch.......................25 symbols for instructions Indicates hazards likely to cause harm to the unit itself or other material damage. Indicates special operating Indicates tips and hints for features of this unit. making the task easier. SpecialDVDFeatures....................25 TitleMenu..........................25 DiscMenu..........................25 CameraAngle.......................25 .25 ChangingtheAudioLanguage. .25 ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . Subtitles...........................25 3 INTRODUC Before Use Playable Disc-related terms Discs Title DVD The main film content (8cm/12cmdisc) or Video CD (VCD) (8cm/12cmdisc) Audio CD (8cm/12cmdisc) In addition, this unit CD-R or or DVD±R, DVD±RW and CD-RW that contains audio titles, MP3, WMA can (DVD only) play a JPEG files and SVCD also. or accompanying feature content additional feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily. Chapter (DVD only) Sections of a picture musical or a piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enable you to locate the chapter you want. Depending on the disc, no chapters may be recorded. Notes -- -- -- Depending the conditions of the recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself, some CD-R/RW (or DVD±R/±RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregular shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. Notes on on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be avail- Track (Video Sections of audio or an enabling On you to locate the scene you want. A scene is composed of one or several tracks. of video CDs Types There are two This DVD and DVDs player is designed and manufactured for playback of region "2" encoded DVD soft2 ware. The region code on the labels of some DVD discs indicates which type of player can play those discs. This unit can play only DVD discs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits. 4 types of video CDs: equipped with PBC (Version 2.0) PBC (Playback control) functions allow you to interact functions, or other typical computer-like operations. Moreover, still pictures of player track number, video CD with PBC with the code of the DVD a video CD (Playback control) functions, moving pictures and still pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a Video CDs. Some DVDs made for business purposes may not be played on the unit. Regional on a Scene Video CDs or only) a picture or a musical piece CD. Each track is assigned you to locate the track you want. other functions may be added. Refer also to the instructions applied with the DVDs and able, CD and audio CD high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Precautions Storing After the unit Handling When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. When setting the unit The picture and sound of a nearby TV or radio may be distorted during playback. In this case, position the unit away from the TV or radio, removing the disc. To keep Do not near or turn off the unit after playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunthere may be a considerable temperature increase inside the car. light, as Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. the surface clean insecticide spray, the unit. Do not leave rubber of plastic products in use volatile leave marks on such liquids, contact with the unit for a as long period of time. They will the surface. the unit Cleaning Do not To clean the cabinet Use discs a use a soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzine, use thinner, or are moistened with a extremely dirty, mild detergent strong solvents, such as these as might damage alcohol, the surface strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static use spray intended for older About records. vinyl Symbols of the unit. About the To obtain clear picture The DVD player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. a " " may appear on the TV This icon means the function manual is not available About the disc on Discs DVD VCD2.0 Handling get playback side of the disc. by the edges so that fingerprints VCD1.1 Do not touch the on the surface. Do not stick paper during operation. explained in this owner's that specific DVD video disc. symbols screen for instructions following symbol is represented by the symbol. one to the disc of the DVD Video CDs with the PBC (playback control) function. discs Hold the disc on A section whose title has applicable only Notes symbol display or tape on the disc. Video CDs without the PBC (playback control) function. will not CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. 5 INTRODUC Front Panel and Window Display POWER Tape Eject Switches the unit to ON or OFF. Reverse Go to Skip/Scan, Rewind ( ) beginning of current chapter/track or Press and hold for two seconds for fast a to PREVIOUS reverse chapter/track. search. Rewinds the tape. Forward Go to Skip/Scan, Fast-Forward ( NEXT chapter/track. Press and hold for two seconds for a ) fast forward search. Winds the tape forwards. STOP ( A ) Stops playback. Disc Tray Insert a disc here. PAUSE/STEP Pause press ( / ) playback temporarily / repeatedly for frame-by-frame playback. DVD/VCR Selector VCR Record DVD OPEN/CLOSE Opens Display DVD to VCR Copy or ( ) Tape Compartment closes the disc tray. Audio IN window Jacks Shows the current status of the unit. Button Video IN Jack Remote Sensor PLAY ( G) Starts playback. Channel Point the remote control here. Indicates current title number Programmed playback CHPTRK Indicates current chapter or Programme Selectors. track number A disc is loaded in the DVD deck. (Lights when a disc is loaded in the DVD deck and flashes when no disc is loaded.) active. Indicates repeat mode. Bilingual MP3 disc is inserted. mode Indicates total VCR deck is selected. playing time/elapsed The current TV show or VCR video is broadcast in stereo recording is engaged The Hi-Fi track of Video CD is inserted. a VHS tape is playing Cassette-In indicator PHOTO disc is inserted. A timer WMA disc is inserted. Indicates TV mode. (See Notes on page 21.) time/current time DVD to VCR copy is in progress DVD disc is inserted. VCR MP3 PROG TITLE CHPTRK BIL STEREO COPY DVD RPT ALL AB VCD PHOTO WMA TV P/SCAN Indicates the 6 (L/R) Progressive Scan is set to On mode. REC Hi-Fi is recording programmed or in progress Child Lock is engaged Remote Control POWER Switch this unit ON or OPEN/CLOSE EJECT Open or close the the disc OFF. DVD/VCR select button Selects operational mode of remote control. - Select input into tape. (see TV VOL +/--: or picture PAUSE/STEP ( )? Pause playback temporarily / press repeatedly for frame-by-frame - - ? Access the On-Screen Display. Shows you the current time or ? ? FGDE(left/right/up/down) ? PR/TRK(+/-) - Play camera angle if available ZOOM video image. REC/ITR Record your - Select the language. ? - - or ANGLE Enlarge Select channel programme of VCR. To adjust tracking. To control vertical tremble during picture still. - subtitle a Select DVD menu (DVD) SUBTITLE Select counter. ? input sources (Child Lock) LOCK Switch the Child Lock ENTER/OK menu selection. ? the title available. ? ? Repeat sequence. recording speed of the tape. RANDOM/CM SKIP ? tracks in random order. CM SKIP and off. menu of the disc if PROGRAM Access ? on into tape. TITLE Display DISC MENU of a DVD disc. A-B/LP AUDIO Select an audio language an audio channel (CD). DISPLAY CLK/CNT menu off TV sound. Access or remove setup menu. RETURN Remove the setup menu. Displays the menu of a video CD with PBC. ? Access on or SETUP/ i playback. PLAY (G) Starts playback. STOP(A)? Stops playback. Acknowledge source. SKIP(./>) Go to next chapter or track. Returns to beginning of current chapter or track or go to previous chapter or track. search. - off the TV. Adjusts TV's volume. MUTE: Turns - item in the recording TV PR +/--: Selects TV's channel. forward. VCR: Rewinds the tape during the STOP mode, for fast reverse picture search and Advances the tape during an on or TV AV: Selects the TV's (m/M) Select for 34) p. TV POWER: Turns BACKWARD / FORWARD the STOP mode, fast forward source TV Control Buttons TV/VCR Switch between your TV's tuner and the VCR's internal tuner. DVD: Search backward Tape Eject. AV 0-9 numerical buttons Select numbered items in a menu. - tray. - or remove program menu. MARKER Mark any point during playback. ? SEARCH Display MARKER SEARCH menu. - ? CLEAR Clear track number on the program menu or a mark on the MARKER SEARCH menu. Reset tape counter to zero. ? REPEAT Repeat chapter, track, title, all. - a - Remote Control Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft Detach the AAA AAA (7 m) from the front of the installation battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries aligned correctly. remote sensor Angle: battery with and About 30° in each direction of the front of the remote sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 INTRODUC Rear Panel AERIAL Connect the aerial this using jack. AUDIO IN Receive (Left/Right) (VCR IN AV1) the audio signals from an external source to VCR. AUDIO OUT Connect to (Left/Right) (DVD/VCR OUT) an amplifier, receiver or stereo system. COMPONENT/PROGRESSIVE SCAN VIDEO OUT (DVD EXCLUSIVE Connect to a (Y Pb Pr) OUT) TV with Y Pb Pr inputs. AUDIO OUT Connect to Pr (Left/Right) (DVD EXCLUSIVE OUT) an amplifier, receiver or stereo system. R R L L Pb Y AC Power Cord Connect to a power OPTICAL source. (Digital audio out jack) Connect to digital (optical) audio equipment. S-VIDEO OUT Connect to a (DVD TV with EXCLUSIVE OUT) S-Video input. COAXIAL (Digital audio out jack) (DVD EXCLUSIVE OUT) Connect to digital (coaxial) audio equipment. VIDEO OUT Connect to VIDEO IN (DVD/VCR OUT) a TV with video inputs. (VCR IN Receive the video AV1) signals from an external RF.OUT (DVD/VCR OUT) Connect to your TV using this jack. Do not touch the inner panel. Electrostatic damage to the unit. 8 pins of the jacks on the rear discharge may cause permanent source to VCR. Connections Tips Depending Notes your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. For better sound reproduction, connect this unit's AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment. See "Connecting to optional equipment" on page 10. -- -- on - - Caution Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. Do not connect this unit's AUDIO OUT jack to the phono in jack (record deck) of your audio system. - Connecting to a TV Make one of the following connections, depending on the capabilities of your existing equipment. When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set TV's input to COMPONENT VIDEO. When using the S-VIDEO OUT jack, set the TV' s input to S-VIDEO. Set the Progressive to "On" on the setup menu for progressive signal, see page 17. Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. 2) Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or SVIDEO connection. Rear of this unit (DVD exclusive out connection) R Pr R L L Basic connection (AV) Pb 1 Connect the VIDEO jack on this unit's DVD/VCR OUT to the video in jack on the TV using the video cable. 2 Connect the Left and Right AUDIO jacks of this unit's DVD/VCR OUT to the audio left/right in jacks on the TV using the audio cables. Basic connection 1 Y (RF) Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of this unit. Rear of TV AERIAL 2 Connect the supplied RF antenna cable from the RF.OUT jack on the rear panel of this unit to your television's Antenna Input. VIDEO INPUT COMPONENT VIDEO INPUT /PROGRESSIVE SCAN Pr Pb AUDIO INPUT Y L S-VIDEO INPUT R DVD exclusive out connection Component Video (Color Stream ) connection 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using an Y Pb Pr cable. 2 Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV using the audio cables. 1 2 S-Video connection Connect the S-VIDEO OUT jack on this unit to the S-Video in jack on the TV using the S-Video cable. Connect the Left and Right AUDIO OUT jacks of this unit to the audio left/right in using the audio cables. jacks on Pr R R L the TV L Pb Y Progressive Scan (ColorStream Pro) connection If your television is a high-definition or "digital ready" television, you may take advantage of the DVD Player's progressive scan output for the highest video resolution possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 1 Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using an Y Pb Pr cable. 2 Connect the Left and Right AUDIO OUT jacks of the unit to the audio left/right in jacks on the TV using the audio cables. Rear of this unit (Basic connection) Note S-Video input, connect this unit with the S-video cable. When using an S-video cable, do not connect the yellow video cable. If the TV has an 9 PREATION Connections Connecting to (Continued) Optional Equipment Notes -- Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II /Pro Logic Connect the Left and AUDIO OUT this Right jacks unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables. on Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 or DTS) 1 Connect this unit's DIGITAL AUDIO OUT jack the corresponding in a digital (coaxial or (COAXIAL or OPTICAL) to jack on your amplifier. Use optical) audio cable. You will need to activate this unit's 2 (See "Digital Audio Output" digital output. page 18). on Multi-channel sound Digital A digital multi-channel sound quality. For this connection provides the best you need a multi-channel Audio/Video receiver that supports one or more of the audio formats supported by your unit (MPEG 2, Dolby DTS). Check the receiver manual and the Digital and logos on the front of the receiver. Warning: Due to the DTS will be in Licensing agreement, the digital output DTS digital out when DTS audio stream is selected. Rear of this unit R Pr R L L Pb Y 2 channel analog stereo Both DVD and or Dolby Pro Logic II / Pro Logic connection Digital DVD exclusive out VCR out multichannel connection L R AUDIO INPUT Amplifier (Receiver) 10 COAXIAL DIGITAL INPUT OPTICAL DIGITAL INPUT If the audio format of the the capabilities of produce a strong, -- To see digital output does not match your receiver, the receiver will distorted sound or no sound at all. the audio format of the current DVD in the On-Screen Display, press AUDIO. Before Operation Tuning in a VCR part - video channel on your TV 6 Press PROG. 3 than 4 seconds. more RF36 will appear in the display window. The following picture will be displayed on the TV Notes The output frequency of this video recorder (VCR) is set at UHF channel 36. If channel 36 already used by another TV station, or if picture is distorted, you can change the transmitter channel of your VCR. Stages 5 will show you how to change the output frequency of your VCR. is Your TV receives recorder signals 8 ~ RF channel number 7 on Press PROG. 3 You Turn 2 RCA lead. 8 on Insert your VCR. video tape into your VCR the remote control. on which you wish to watch video's. Don't worry if you don't have a video-tape to play at this stage! If you switch your VCR on and continue stages 3 4, instead of seeing video playback tune ~ your TV until you 3 see a bright blue Tune this channel until the video screen. picture is sharp on which you wish to watch video's. POWER appears. Store this channel pre-recorded and press PLAY on Select a TV channel number TV channel number on the front of your VCR when you have finished. Tune this channel so that your TV. a a Press that you have correctly installed your described earlier in this book. sure on to select another video channel. also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a Select Press POWER to turn or 4 can called AV. as i You may select any channel number between 22 and 68. ence VCR 36 from the video cables then your TV should already have a dedicated video channel built into it, usually Make CHANNEL PSET R your TV and tune it in so that you may watch video tapes. If you have used AUDIO and VIDEO a screen. the like another TV station. You (VCR) have to select 1 the front of your VCR for or 4 on on a bright blue screen your TV. Note Make that you have correctly installed your VCR and successfully tuned in a dedicated video sure your TV. If you do not tune in a dedicated video channel on your TV you will be channel on unable to view and record video tapes! and the sound is clear. If you have used a AUDIO and VIDEO cables you will not have to tune your TV, simply select the AV channel. The AV channel is optimum 4 video playback Store this channel on already pre-tuned for your TV. your TV. You will need to look at the TV instruction book if on you do not know how to do this. 5 Only carry out clear video Select a stages playback 5 as 8 if you cannot obtain described in stages 1 4. ~ TV channel number your VCR for the very first time Using Following picture will display on the when you have just connected your TV screen video recorder for the very first time. TV To make tuning 3 to 4 shown "ACMS" as stations, please follow stages (see p.13). ~ on which you wish to watch video's. that your VCR is in POWER on the remote control Make be sure displayed). standby pressing (only the clock will ACMS Pr-12 ACMS OKi 11 PREATION Before Setting Operation the clock - VCR part To set the colour system Manually The clock in your VCR controls time and date settings for your VCR. 1 Press i. 1 Press 1 or 2 to select TIME DATE. Press OK. :. - - -- -- -- 2 The main 3 Press 1 or Press 3 or 4 menu --- . will appear on the TV screen. 2 to select the SYSTEM and press OK. 4 system used. HHMNDDMMYY -- Press i. to select according to the COLOUR 12 TIME DATE 2 i Use the numbered buttons to alter the the remote control on HOURS, MINUTES, DAY, MONTH and VCR YEAR. REC fOS Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. of the week will appear you enter the year. The day automatically ON OFF AUTO PAL MESECAM SYSE TEM Dr. SYSTEM i OPR when Press 1 5 Press or 2 to select the RF AUDIO. 3 or 4 to select according to the RF AUDIO used. HHMNDDMMYY 8 :. 0010104THU . 12 TIME DATE i VCR REC fOS ON OFF 3 4 If you make a mistake press 1 correct details. Press i. 12 or RF I/I RF B/G RF D/K SYSE TEM Dr. SYSTEM i OPR 2 and enter the 6 Press i to remove the menus from the TV screen. Before How to This VCR menus The Operation using VCR part - the main Tuning menu easily be programmed by using displayed on screen. can menus are the controlled from the Remote Control Handset. 1 2 Switch your TV set and video recorder the POWER button. by pressing Press i button. menu will appear on the TV screen. section 1 2 on PSET R TIME DATE SYSTEM Dr. NIC fOSD ON OFF REC ACMS Press POWER to turn PREATION your VCR. on Press i button. The main will appear on the TV 2 to select the ACMS. menu screen. REC OKi OPR 12 Timer recording setting (see p. 22). PR SET Manual tuning setting (see p. 14). ACMS ACMS (Automatic Channel Memory System) (see p. 13). TIME DATE Date & clock setting (see p. 12). SYSTEM To set the Colour TV System (see p. 12). Dr. To check a problem with your VCR (see p. 30). F.OSD ON/OFF To display the operational mode of your VCR (see p. 30). OPR To improve the playback picture (see p. 20). NIC To activate or deactivate the NICAM digital sound (see p. 31). - turn to the MANUAL TUNING VCR 12 REC signal page 14. Press 1 or Press OK. Pr-12 Automatically is weak your VCR may not detect the necessary information and will not be able to store them correctly. To overcome this If the TV broadcast problem please on The main in TV Stations Pr-12 PSET R REC fOSD TIME DATE SYSTEM Dr. Pr-12 ACMS NIC ON OFF - ACMS VCR OPR OKi - - O O O O O - - ACMS Pr-12 - - - 3 Press OK again to start the automatic 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 change the menu language on the DVD setup (See the Menu Language on page 17.) can menu. S 3 4 tuning process. Tip You OKi ACMS Press 1 and 2 to select the desired Press OK and press 3 Press "i" to return to a or 4 TV menu. E Pr-12 i ACMS to select. picture. 4 The TV STATION TABLE will appear when is complete. Press i to save your settings. 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R tuning MOVE : DELETE : , OKi 13 Before Tuning In certain Operation VCR part - in TV Stations Searching Manually 4 Press of the country broadcast signals may be too weak for your VCR's automatic tuning process to find or assign TV stations correctly. or 4 You must tune in these weaker broadcast stations manually 1 stop when it locates to PR CH MFT 09 C10 00 Press i. Press 1 STATION CHANNEL/CABLE : PSET R will appear on the TV 2 to select the PR SET. menu or station. adjust. in order for your VCR to store them. The main a 2 to select MFT. Press 3 areas will AV i screen. Press 2 to select STATION 5 your Press OK. that you may so name TV station. Press OK. PR C09 12 REC PSET R Pr-12 ACMS SYSTEM Dr. 01 C10 00 STATION - PSET R OKi OPR PR MFT VCR NIC fOSD ON OFF TIME DATE CH CH MFT STATION C02 00 PR-01 PSET R 6 Press 3 new or 4 station Press 1 or OK i to select letters and numbers for the name. 2 to move back and forth between characters. CHANNEL/CABLE : AV PSET R 2 Press OK. i Press i. The station table will appear. Press 3 or 4 to select the programme number that you want to tune (for example, PR PR C09 CH MFT STATION C10 00 ABC 09). PSET R 01 C02 00 PR-01 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R MOVE : DELETE : 7 Press i, confirm the station Press i again. Your new TV station has If you wish to stages 1 7. OKi , OK i placement. been tuned into your VCR. tune other stations repeat now manually - 3 Press OK. 09 Press AV to select C (Standard stations) or S (Cable stations): C02 - C69, S01 13 - S41. 14 15 to tune with the numbered buttons or use 3 or 4 required station. PR CH 09 C-- MFT STATION -- ---- CHANNEL/CABLE P R SET 14 11 12 Enter the channel number of station that you want to find the 10 : AV i 16 PSET R C10 ABC 00 -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- MOVE : DELETE : , OKi Before Operation Changing - VCR part the order of TV Stations Deleting After tuning TV stations into your VCR you may wish to change the order in which they are stored without having to retune them. The instructions given on this page will show you how you can simply move them into your desired order. 1 Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. TV Stations After tuning TV stations into your VCR you may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations. 1 screen. Press i. The main menu will appear on the TV Press 1 or 2 to select the PR SET. Press OK. 12 PSET R REC VCR 12 PSET R REC Pr-12 ACMS TIME DATE Dr. TEM NIC fOSD ON OFF ON OFF PSET R SYS- Dr. TEM PSET R OKi OPR PR 01 TIME DATE OKi OPR PR ACMS VCR NIC fOSD SYS- Pr-12 CH MFT STATION C02 00 PR-01 01 CH MFT STATION C02 00 PR-01 CHANNEL/CABLE CHANNEL/CABLE : AV PSET R 2 Press i. Press 3 2 Press i. Press 3 to select the programme number you want to delete. (for example, PR 03) or 4 01 C02 00 PR-01 02 C03 00 PR-02 03 C05 00 PR-03 C02 00 PR-01 04 C06 00 PR-04 02 C03 00 PR-02 05 C04 00 PR-05 03 C05 00 PR-03 06 C07 00 PR-06 04 C06 00 PR-04 07 C08 00 PR-07 05 C04 00 PR-05 08 C09 00 PR-08 06 C07 00 PR-06 07 C08 00 PR-07 C09 PSET R MOVE : DELETE : OKi , PR-08 00 MOVE : DELETE : OKi , 01 C02 00 02 C03 00 PR-01 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 06 C06 C07 00 00 PR-05 07 C08 00 PR-07 08 C09 00 PR-08 3 Press 1. After a short while, the selected station will be deleted. PR-06 PSET R OKi to select the programme number you want to move to (for example, PR 05). 01 C02 00 PR-01 02 C03 00 PR-02 03 00 PR-04 04 C05 C06 00 PR-05 05 C04 00 PR-03 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 01 C02 00 PR-01 02 C03 00 03 00 04 C05 C06 00 PR-02 PR-03 PR-04 05 06 C04 C07 00 00 PR-05 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 MOVE or 4 PSET R 4 i 01 PSET R 3 AV i to select the programme number you want to move (for example, PR 03). Press 2. Press 3 : PSET R or 4 08 PREATION screen. DELETE P SET R 4 : OKi , Press i to remove the menus from the TV screen. If you wish to delete other TV stations repeat stages 1 - 3. OKi Press OK. The selected programme will be moved to the new programme number. If you wish to move other TV stations repeat stages 1 4. Press i to remove the menus from the TV screen. : 01 C02 00 PR-01 02 00 03 C03 C06 00 PR-02 PR-03 04 C04 00 PR-04 05 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 08 MOVE: PSET R DELETE : , OKi - 01 C02 00 PR-01 02 C03 00 03 00 04 C05 C06 00 PR-02 PR-03 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 PSET R MOVE : DELETE : , How to selecting Stored TV stations: Stored TV stations can be selected in either of two ways. Press PROG. 3 or 4 to select different stations that are tuned into your VCR. You may also directly select stations using the numbered buttons on the remote control. OKi 15 Before General This manual Operation - DVD part Temporary Explanation the basic instructions for gives operating this unit. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by this unit is not available or On-Screen The TV screen. 1 2 3 or ALL Repeat All Tracks AB Repeat A-B can be displayed on the changed on the menu. Action the change The number buttons (e.g., title can setting of press ENTER to execute the For (non-PBC only) Video CDs only) from this prohibited or point not available Some discs may not Screen Display. provide If for 10 seconds, the On-Screen button is some no all of the below On- item. an be also be used for number). play pressed Display disappears. 4 to select an item. 2 to Video CDs Notes during playback. Press 1 (non-PBC Repeat Off Resume highlighted. numbers Track OFF The selected item will be or Repeat display operation Press DISPLAY Press 3 TRACK status can be Some items On-screen Title Repeat Chapter CHAPT Display general playback Repeat TITLE the disc. on Feedback Field Icons setting functions, setting. DVD Items Function (Press 3/4 to select desired item) Title Number Shows the current title number and total number of 1/3 Chapter 1 /12 Time search 0:20:09 Audio language and Digital Audio Output mode skips to the desired title number. 1 ENG D 5.1 CH chapters, and number and total number of chapter skips to the desired Shows the elapsed playing time, and searches the point by the elapsed time directly. Shows the current audio soundtrack encoding method, and changes the setting. channel Shows the current subtitles ABC OFF chapter number. language, number, and language, 1/1 Sound angles, and angle number and total changes the angle number. mode, number of , ENTER Numbers , ENTER 1/2,or AUDIO 1/2,or ANGLE 1/2 changes the setting. VCD1.1 Function (Press 3/4 to select desired item) Track Number Shows the current track 1/4 Time Audio Channel 16 Numbers and Items Sound 1/2,or SUBTITLE Shows the current sound NORM. 1/2,or Numbers, ENTER 1/2,or and changes the setting. Shows the current Angle VCD2.0 and Shows the current Number Subtitle language titles, Selection Method 0:20:09 and PBC On Shows the mode, elapsed playing Shows the audio STER. NORM. and number, total number of tracks skip to the desired track number. channel, time changes the setting. 1 /2,or Numeric, ENTER (Display only) and -- 1 changes the audio channel. Shows the current sound Selection Method /2,or AUDIO mode, and 1/2 Before Initial You DVD part Picture Settings set your own Personal Preferences on this unit. can Initial 1 Operation - General Settings Aspect DVD 4:3 Letterbox: Select when a standard 4:3 TV is con- Operation nected. Displays theatrical images picture. above and below the Press SETUP. The setup TV menu with masking bars 4:3 Panscan: Select when a conventional TV set is appears. connected. The video material formatted in the Pan & Scan Disc Audio Original Disc Subtitle English Disc Menu Spanish Rating German Country TV Code Language Scan Progressive Audio Digital back in that is played cut off). Output Portuguese Disc Audio 4:3 Letterbox Greek Disc Subtitle 4:3 Panscan French Disc Menu 16:9 Wide Chinese Rating Other------------ Country TV Code Aspect Menu Language Scan Progressive Press 3/4 to select the desired item. screen as well as setting for the alternate setting(s). While the desired item is selected, press 2, then 3 3/4 select the desired setting. Press ENTER confirm your 4 selection. to Press 5 setup additional steps. require SETUP, RETURN or PLAY to exit the menu. Language Select Progressive original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 36. If you enter the wrong language : DVD for the disc's Menu, Audio, and Subtitle. Original Scan If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. DVD language a Others Off. Language Disc Output Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting this unit to a standard (analog) television, set Progressive Scan to to Some items Audio Digital will show the current selected item, sides of the 16:9 Wide: Select when a 16:9 wide TV is connected. Others 2 The style (Both Italian Aspect Menu style picture are The Off Disc Subtitle On Disc Menu Rating Country TV Language Original Disc Subtitle English Disc Menu Spanish Rating German Country Code Aspect Menu Scan Progressive Audio Digital Output Audio Output Others Italian Caution Portuguese Language Scan Progressive Digital Disc Audio Code Aspect Menu code, press CLEAR. TV Disc Audio Greek Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan French Chinese Other------------ Others to On in error, you must reset the unit. Menu Language Select a you see 1) for the setup menu. This is the when you press SETUP. language Disc Audio English Disc Subtitle Spanish Disc Menu German Rating Italian Country TV Code window. 2) Press STOP and hold it for five seconds before releasing it. The video standard setting ble on a and output will be restored picture will once again analog TV or monitor. conventional a to the be visi- Greek Aspect Menu Portuguese menu Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display Language Progressive Digital Audio Scan Output Others 17 PREATION Before Operation DVD - part Sound Digital Others Audio Output Each DVD disc has Set the The DRC, Vocal, PBC and Auto variety of audio output options. player's Digital Audio Output according to the a type of audio system you use. DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" between On and Off. ment with a Disc Menu Disc Subtitle Dolby Digital decoder). DTS decoder, MPEG decoder. or Dolby Digital a on the Country TV Vocal On PBC On 2-channel Play Off Code Aspect Menu decoder Language Progressive digital Scan Audio Output Others This unit outputs sounds in the PCM 2ch format when you play a DVD video disc recorded stereo On Rating Digital PCM: select when connected to DRC Auto Stream/PCM: Select "Stream/PCM" if you connected this unit's DIGITAL OUT jack to an amplifier or other a be Press 3/4 to select the desired item and press ENTER. The setting of the selected item is changed Disc Audio with can changed. if you connected this unit's DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- equipment Play settings amplifier. Dolby Digital, MPEG1, MPEG2 or recording sys- Dynamic Range Control (DRC) With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation tem. Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM /PCM Rating Country TV Code Aspect Menu 48KHz Language 96KHz Scan Progressive Digital Sample Freq. Audio Output possible, thanks to audio digital technology. However, dynamic range of the you may wish to compress the audio output (the difference between the loudest sounds and the listen to at a of sound. Set quietest ones). Then, you may lower volume without losing clarity a movie DRC to On for this effect. Others Vocal Sample Frequency Set Vocal to On To only DVD is The karaoke channels Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing. change the playing. mix into a when a multi-channel karaoke on the disc will normal stereo sound. PBC Set Playback Control (PBC) On: Video CDs with PBC are Off: Video CDs with PBC are to On or Off. played according to the PBC. played the same way as Audio CDs. Auto You Play set up the DVD Player so a DVD disc automatstarts playing whenever the DVD is inserted. can ically If Auto Play search a play DVD mode is set to On, this DVD player will title that playback time is long most and then back the title automatically. On: Auto Off: Play function is activated. Auto Play function is not activated. Note The Auto 18 Play function may not work for some DVDs. Before Operation DVD - part Parental Control Country Rating Enter the code of Movies DVD DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control on information that certain to the applies complete the disc. These scenes on disc or scenes are DVD a country/area whose standards were used to rate the DVD video disc, referring to the list (See "Country Code List", page 37.). to rated from 1 to 8, and alternatively, more suitable scenes available for selection on some discs. Ratings are country-dependent. Code Disc Subtitle are PREATION Code Set Disc Audio SA Disc Menu Rating Country The Parental Control feature allows TV Aspect Menu you to prevent discs from being played by your children or to have certain discs played with alternative scenes. Code Language Scan Progressive Audio Digital Output Others Disc Audio 8 Disc Subtitle 7 Disc Menu 6 Rating 5 Country TV Code Aspect Menu the Code Country setup using Audio While 2 Scan Progressive 1 Output Unlock Change Country 2 step 3 4 5 6 selection, Code is 3 of selected, press 2. "Rating" Select the first character 1 Select 2 While 3 When you have not entered a password yet. Enter a 4-digit password using the numbered but- 3 and on the Setup menu using the buttons. 4 "Rating" is Shift the selected, press personal 4-digit security password, then press ENTER. Enter the 4-digit password again and press ENTER to verify. When you have already entered a password; Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security password, then press ENTER. If you make a mistake before pressing ENTER, press CLEAR and enter 4-digit security password again. 4 rating from 1 to 8 using the 3/4 buttons. One (1) has the least playback restrictions. Eight (8) has the most playback restrictions. Unlock: If you select Unlock, Parental Control is not active. The disc will play in full. 1 to 8: Some discs contain scenes played. Higher unless an rated alternative scenes scene is available The alternative must have the lower If will not be same on rating played the disc. or a suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. 5 one. no Press ENTER to confirm your then press SETUP to exit the left. using the 3/4 buttons. 1/2 buttons and select using 3/4 buttons. Note Confirmation of the the code is below 4-digit password changed (see "Changing is necessary when the 4-digit code" ). Changing the 4-digit code 1 Follow 2 3 Enter the old code, then press ENTER. Select "Change" using the 3/4 buttons then press ENTER. 4 Enter the 5 Enter exactly the same fy by pressing ENTER. 6 Press SETUP to exit the Steps 1-2 as shown above to the left new (Rating). then press ENTER. code a second time and veri- 4-digit code, menu. not suitable for children. If you set a rating for the player, all disc scenes with the same rating or lower will be using on Press ENTER to confirm your country code then press SETUP to exit the menu. a Ratings cursor the second character 2. tons to create a Select on menu. Follow Others "Rating" the 3/4 buttons 3 Language Digital 1 4 Select If you If you forget your 4-digit code your password, to clear the current password, follow the procedure below. 1 2 forget Press SETUP to the setup menu. Use the Number buttons to enter the 6-digit number display "210499". The 3 4-digit password is cleared. Enter a new code as shown above to the left (Rating). rating selection, menu. 19 with Operation Playing You will tape a only tape 5 be able to load and eject video cassettes when your VCR is plugged into the mains. Your VCR may also playback recordings from NTSC tapes (on PAL Getting a better When cassette is inserted and a To switch off the slow motion and shuttle, press the desired function. TV). picture slow motion and shuttle, the noise bars may appear on the picture according to the status of During playback started, the tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press TRK + or on the remote control to manually adjust the tracking tape. automatic If distortions until any distortions have been removed. Press numbered 0 on the remote control to switch automatic back 6 1 VCR that you have correctly connected your described earlier in this book. sure as your TV. Press POWER to turn Turn your VCR. Insert the video cassette into your VCR. on The video cassette should have the window side up and the picture, reduce -. playback. Press EJECT. tape is reached, your VCR will stop playback automatically, rewind, stop, eject the tape. (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume normal on facing + or in the seen If the end of the CM Make be Press STOP to end again. on can them with TRK - tracking playback, Shuttle : During playing back or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) Slow motion arrow facing away from you. playback. While tape is playing press CM SKIP on the remote control to skip commercial (or another programme material). Repeatedly press CM SKIP to skip: 1 Press 30 seconds 2 Press 60 seconds 2 Press PLAY to start playing your tape. video cassette which has had its 3 Press 90 seconds If you load a record protection tab removed, playback of the cassette will start automatically. 4 Press 120 seconds 5 Press 150 seconds 6 Press 180 seconds AUTO TRACKING Your VCR will give 3 the best automatically adjust picture quality. Press PAUSE/STEP to still Press PAUSE/STEP the tracking to picture. repeatedly to advance the Tapes paused for up to 5 minutes. After 5 minutes your VCR will stop the tape to prevent damaging the tape or your VCR 1 Press i. 2 Press 1 3 Press OK. . picture quality can pressing TRK + or be Response) tape. playback. be Still Picture automatically improves playback picture quality by adjusting your VCR to the condition of the tape frame by frame. If you press FORWARD, the picture will be slowed can (Optimum This feature a down at about 1/19 times the normal OPR improved slightly by or 2 to select OPR. -. 4 Press PLAY to continue playing your tape. Picture search: back press either FORWARD or BACKWARD and this will enable you to rapidly wind the tape (7 times normal playback) and see During playing where you are on R f ON OFF the tape. Logic search: During fast forwarding rewinding press and hold FORWARD or BACKWARD the picture will be played back at 7 times normal playback speed. 4 or Press 3 or 4 12 12 MS VCR TIME DATE SYSTEM Dr. OPR C i OPR repeatedly to select: OFF, SOFT SHARP. Please note you may playing 5 20 OFF SOFT SHARP a only tape. Press i return to screen. set OPR when or Operation with Instant Timer tape Recording (ITR) Your VCR allows you to make variety of simple methods: 5 recordings using time Your VCR record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be quality when 6 RECORD 1 VCR loss in slight a picture 7 and Insert 2 VCR. a on your VCR. video cassette with protection tab into your The video cassette should have the window side facing up and the arrow facing unwanted scenes. If you press PAUSE/STEP unit will enter the record pause mode and ITR is cancelled. paused for up to 5 minutes; RECP will be displayed when a tape is paused. After 5 minutes your VCR will stop recording to prevent damaging the tape or your VCR. that you have correctly connected your described earlier in this book. Press POWER to turn recording recording. during ITR, this LP. using Press PAUSE/STEP to avoid Press PAUSE/STEP to continue sure as recording. press will increase the record time by 30 minutes until you reach a maximum of 9 hours. Tapes Make SP. Press REC/ITR to start which incorporates Long Play (LP) enables you to record up to twice the amount of time on a video cassette. For example an E-180 will sound as will appear on the TV screen. Press REC/ITR several times. Each successive out. runs or produce improved picture and sound quality, however LP will provide twice as much recording Instant Timer video cassette Long Play SP will a Recording (ITR) start recording immediately for a set period of time or until the Press LP if you wish to record in Standard Play. can be Press STOP to end 8 recording. Press EJECT. EJECT will appear seconds. on the TV screen for a few away from you. Notes 3 4 Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. If you wish to record directly from the AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN terminals repeatedly press AV until the socket you wish to record from is dis- played. recording from AUDIO VIDEO (VCR IN AV1) terminals AV 1 for L/R on (VCR the IN rear AV1)/ If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. It is possible to record on a video cassette with the record protection tab removed by covering the hole with self adhesive tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. of your unit. AV 2 for recording from AUDIO IN VIDEO IN terminals on (L(MONO)/R)/ the front of your unit. 21 OPERATION with Operation tape Timer recording using Display On Screen 6 You may set up to seven timer record events within one month of the current date. Press the numbered buttons to enter the recording start and end times of the programme that you wish to record. Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times by pressing Note or 4. 3 Before setting the timer make sure that you have set the VCR clock correctly and you know which stations you have tuned TV stations on your VCR. 1 Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. 2 Press i. Press 1 or 2 to select REC. Press OK. REC SYSTEM Dr. -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- :: -- -~ -- SP SP SP :: SP -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- DELETE: OKi OPR , or DATE PR SP -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ OK i :: -- -~ :: -- -~ :: -- -~ :: -- -~ -~ -~ -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- SP SP SP SP speed TIME 16 1900 :: 2000 SP :: SP ~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- i Press the numbered buttons to enter the station that you wish to record. When selecting stations 1 9, press 0 first, then the channel number; for example Stations 3 03. You may also select Channels by pressing 3 or 4. Once selected press 2. If you wish to record from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN from the back or on the front of your unit, press AV to select for correct display (AV1 or AV2). - -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP 9 SP -- -- SP Press STOP to end SP -- :: -- SP -- :: -- SP -- :: -- 8 SP -- -~ Check that the timer event details are correct. Press i twice. If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. Press POWER to switch your VCR Standby. will appear in the display window while your VCR waits to make the recording. To watch a DVD during timer recording standby mode, press POWER and DVD to switch to DVD mode. SP -- -- i SP -- :: -- DATE PR-01 SP TIME -- -- -~ LP). SP Press 1 to delete the event. PR -- SP replace. 4 SP ~ Press 2 to select the recording speed. Press 3 or 4 to select the desired tape Press OK to start setting the timer record event. If all timer record events are full press 3 or 4 to select the event that you wish to remove and 3 19002000 :: REC NIC fOSD ON OFF ACMS TIME DATE -- VCR 12 P R SET -- 16 IP mode determines how much tape is left and switches speed from SP to LP, if necessary, to complete recording the program. TIME -- TIME i (SP, IP, DATE DATE PR-01 7 PR Pr-12 PR recording. - PR PR-01 DATE change. TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. SP SP SP SP SP SP SP i Press the numbered buttons to enter the date of the programme. If you press OK before entering the date you may select one of the following automated recording features. Press 1 or 2 to select, then press OK to confirm. DLY To record every day (except Saturday and Sunday) at the same time. SU SA To record at the same time every week. 5 ~ PR DATE TIME -- PR-0116--- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP SP DLYSUMOTUWETHFRSA -- -- -- :: -- -~ -- OK i 22 Notes If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end Programme 2 is programmed to start at 16:30 and end at 17:00. at 17:30. this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be (In recorded.) Operation Playing with DVD and Video CD DVD and Video CD a Playback Setup Turn on DVD VCD2.0 the TV and select the video nected to the DVD General Features Note VCD1.1 input source con- player. features may also be available Audio system: Turn on the audio system and select the input source connected to the DVD 1 Moving player. Press OPEN/CLOSE to open the disc Unless stated otherwise, all operations described use the remote control. Some 2 facing up. When a double-sided DVD is inserted, make the side you want to play is facing down. 3 READING starts appears automatically. sure tray. appear The a menu screen is displayed may be displayed first after Video CD which contains a menu. menu screen DVD or loading a DVD Use the 1 2 buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or DISC MENU to return to the menu 3 DVD than more DVD title, you one can move a 4 to follows: as num- to another CHAPTER/TRACK title on a more 1/3 1 /12 VCD1.1 disc has instead. If disc has another title When might a Moving the TV screen, and playback If playback does not start, menu menu. Press DISPLAY, then press the appropriate bered button (0-9) to select a title number. on press PLAY. In some cases, the disc to another TITLE Setup tray. tray, with the label Press OPEN/CLOSE to close the the 1/3 When Load your chosen disc in the on disc has than chapter/track as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISPLAY. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). screen. Note VCD2.0 Use the number buttons to select the track you want to view. Press RETURN to return to the Menu setting the and the exact operating procedures depending on the disc. menu for menu screen. You also may set PBC to Off under setup. See page 18. Notes -- If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit -- -- Your player will not different from your player is 2 (two). -- To watch a DVD the numbered buttons Slow Motion DVD 1 Press m or M during The player VCD2.0 VCD1.1 pause. will enter SLOW mode. 2 Use the m or M to select the required speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16, T 1/8, T 1/4 or T 1/2 (forward). 3 To exit slow motion mode, press PLAY. code must be entered and/or the disc must be authorized "Parental Control", DVDs may have a two-digit numbers, press (0-9) in rapid succession. menu screen. may differ Follow the instructions on the each using For (see page 19). region code. on Note Slow motion playback in reverse is not applicable for Video CD. play discs that have a region code player. The region code for this during timer recording standby mode, press POWER and DVD to switch to DVD mode. 23 OPERATION with DVD and Video CD Operation General Features Still Picture and VCD2.0 DVD (continued) Frame-by-frame playback VCD1.1 1 Press PAUSE/STEP will The Video CDs press REPEAT. playing, on the TV screen. repeat the disc currently playing, press REPEAT a second time. during playback. player go into pause mode. 2 You can advance the picture frame-by-frame The now on Track/All/Off Repeat 1 To repeat the track currently The Repeat Track icon appears 2 To pressing PAUSE/STEP repeatedly - by Repeat 3 To exit the remote All icon appears Repeat mode, screen. press REPEAT Repeat Off icon appears The the TV on the TV on a third time. screen. control. Note Search VCD2.0 DVD 1 Press m or M The player will On Video CD with PBC, you must set PBC to Off on the setup menu to use the Repeat function. See page 18. VCD1.1 during playback. go into SEARCH mode. now 2 Press m or M to select the required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). 3 To exit SEARCH repeatedly Random mode, press PLAY. VCD2.0 Karaoke DVD 2 To return to normal "NORMAL" appears Tips By pressing on the TV AB To repeat a screen. press RANDOM until the TV screen. > during Random playback, the unit title (track) and resumes Random play- Notes only works with DVD Karaoke discs and OnaVideoCDwithPBC,youmustsetPBCtoOffon Time Search 0:20:09 DVD play appears on during playback. the -:--:-- The playing on-screen at dis- screen. The Time Search box shows the elapsed playing time of the current disc. seconds, press 3/4 to select the Time on-screen display. The "-:--:--" appears in the Time Search box. the seconds, required use the number buttons to enter start time. Enter onds from left to to use the Random function. See right hours, minutes, and sec- in the box. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then enter the correct numbers. VCD2.0 DVD TITLE CHAPT point. 3 To cancel the sequence, press A-B. 3 Within 10 video CD without PBC. menu title: again Search icon in the This function a 1 Press A-B at your chosen starting A* appears briefly on the TV screen. 2 Within 10 Repeat sequence in The Time Search function allows you to start any chosen time on the disc. back. the setup page 18. OFF 1 Press DISPLAY selects another VCD1.1 begins. VCD1.1 playback, on A* VCD2.0 DVD at your chosen end point. A B appears briefly on the TV screen, and the repeat sequence during playback or in stop mode. automatically begins Random Playback and "RANDOM" appears Repeat A-B 2 Press A-B 1 Press RANDOM The unit a TRACK VCD1.1 ALL 4 Within 10 seconds, press ENTER to confirm the start time. OFF starts from the selected time on the disc. If you enter an invalid time, playback will continue from the current point. Playback DVD Video Discs 1 To - Repeat Chapter/Title/Off repeat the currently playing chapter, press 3D Surround REPEAT. The 2 To Repeat Chapter icon appears on the TV repeat the title currently playing, press REPEAT second time. The Repeat Title icon appears 3 To exit The Repeat on the TV screen. mode, press REPEAT Repeat Off icon appears on the TV a third time. screen. a VCD2.0 VCD1.1 3D SUR NORM. 3D Surround effect, which simulates multi-channel audio playback from two This unit screen. DVD can produce a conventional stereo speakers, instead of the speakers normally required to listen to five more multi- channel audio from 1 Press DISPLAY a or home theater system. during playback. 2 Press 3/4 to select "NORM." or "3D SUR". 3 Press 1/2 selected. 24 repeatedly until the desired sound is with DVD and Video CD Operation General Features Zoom VCD2.0 DVD (continued) VCD1.1 Checking during playback or still playback to acti- vate the Zoom function. If you press ZOOM repeatedly, the increases up to six times. 2 Use the 1 2 zoomed 3 4 buttons to picture. 3 Press CLEAR to resume normal the the through playback or the contents of DVD Video DVDs may contain menus that allow you to access special features. To use the disc menu, press DISC MENU. Then, press the appropriate number button to select option. Or, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. magnification level move return to paused image. 1 Press TITLE. screen. Note zoom The zoom function may not work for function may not work on some DVDs. nine can 1 Otherwise, the disc and subtitle multi-angle DVD VCD2.0 menu may appear. options, angles, spoken language chapters for the title. and start playback 1 Press DISC MENU. memorized a to point. Up be memorized. can The disc is menu displayed. 2 To remove the disc menu, press DISC MENU mark, follow these steps. a DVD Disc Menu from again. VCD1.1 MARKER SEARCH points To enter menu, the menu will appear on the 3 To remove the title menu, press TITLE 1/9 You a 2 The menu can list camera scenes. Marker Search an DVD Title Menu If the current title has The DVD discs: Menus The Zoom function allows you to enlarge the video image and to move through the enlarged image. 1 Press ZOOM DVD Features Special During disc playback, press MARKER when playback reaches the spot that you want to Camera Angle DVD again. 1/1 memorize. The Marker icon will appear 2 on the TV 1 to enter up to nine Marker Repeat step If the disc contains briefly. screen points on a disc. To Recall 1 Marked Scene a disc During playback, The MARKER SEARCH 2 Within 10 recorded at different The number of the current angle appears on the menu will appear on seconds, press 1/2 to select a the screen. Marker Changing num- the Audio Language 1 ENG Press AUDIO ferent audio scene. SEARCH. repeatedly during playback language or audio track. Changing the Audio Channel to hear a dif- VCD2.0 Press AUDIO During Marked Scene disc playback, The MARKER SEARCH 2 3 DVD 5.1 CH 4 To remove the MARKER SEARCH menu, press 1 display. D will start from the Marked a a press SEARCH. 3 Press ENTER. To clear camera angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select desired angle. ber that you want to recall. Playback scenes ferent audio repeatedly during playback to hear channel (STER., LEFT or RIGHT). VCD1.1 a dif- press SEARCH. menu will appear on the screen. Press 1/2 to select the Marker number that you want Subtitles DVD to erase. Press SUBTITLE Press CLEAR. different subtitle ABC 1 ENG repeatedly during playback languages. to see the The Marker number will be erased from the list. 4 Repeat steps 2 and 3 to erase additional Marker numbers. 5 To remove the MARKER SEARCH menu, press Note If appears, the feature is not available on the disc. SEARCH. 25 OPERATION Operation Playing CD an Audio CD and MP3/WMA Disc MP3 The DVD with Audio CD and MP3/WMA Disc Notes MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs. Before playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on right. Insert 1 a disc and close the tray. files that have The player not read an MP3 file that has a file a technology. WMA(Windows compression of MP3/WMA Disc limited Press 3/4 to select the MP3/WMA then press ENTER. The MP3/WMA menu appears on the TV screen. Press RETURN to move to the MP3/WMA-JPEG choice menu. 1. 2. 3. 4. Program Folder1 Folder2 Folder3 Folder4 Folder5 Folder6 Folder7 Clear All 5. OFF 0:00:00 a as Media 4 compatibility track then press PLAY or the current track's elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. move to the previous page. Program MP3 WMA Program TRACK02 TRACK 1.mp3 TRACK03 TRACK 2.mp3 TRACK 4.mp3 TRACK05 the 5 File names should be named TRACK06 TRACK 6.mp3 TRACK07 TRACK 7.mp3 are Clear All the in 34 to previous To 26 a Clear All TRACK 8.mp3 NORM. 0:00:00 1 MP3/WMA menu OFF or or 8 letters or less ".wma" extension "********.WMA". 7. Donotusespecialletterssuchas"/:*?"<>"etc. 8. Total number of files on the disc should be less than 650. menu and press ENTER to return to highlight menu screen. at any other This DVD player requires discs/recordings to meet certain technical standards in order to achieve Pre-recorded DVDs are optimal automatically types (including CD-R containing MP3 or WMA files). That require certain pre-existing conditions (see above) to insure compatible playback. Customers should also note that file list and want to return to the Folder list, stop playback incorporate ".mp3" using of recordable disc formats TRACK 5.mp3 Tip use 6. set to these standards. There are many different TRACK 3.mp3 TRACK04 If you MP3/WMA file in the 1st or use a new one. playback quality. TRACK01 Audio CD no to the next page. move Press DISC MENU to STER. is CD Creator", which creates an ISO9660 file system. A single session disc requires MP3/WMA files in the e.g. "********.MP3" 0: 56: 18 player - Playback starts. During playback, TRACK08 with this follows: and must CD offers double the audio the MP3 format. ENTER. Press TITLE to Audio) compression Sampling Frequency / only at 44.1kHz (MP3), 22.05-44.1 kHz (WMA) Bit rate / within 32 320kbps (MP3), 32-128 kbps (WMA) CD-R physical format should be "ISO 9660" If you record MP3/WMA files using the software which cannot create a FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback MP3/WMA files. We recommend that you use "Easy- the disc a Audio) track, it cannot playback MP3/WMA files. If you wish to playback MP3/WMA files, format all the data in folder, and ENTER. 3 A list of files in the folder appears. Press 3/4 to select Media Microsoft audio first track. If there is Press 3/4 to select ".mp3". WMA(Window An WMA file is JPEG Folder8 can extension other than MP3 WMA MP3 WMA compressed by using the layer-3 file-coding scheme. We call the ".mp3" file extension "MP3 files". MPEG1 audio About CD; Audio CD menu appears on the TV screen go to step 4. MP3/WMA disc; The MP3/WMA-JPEG choice menu appears on the TV screen. Go to step 2 Audio 2 Recordings An MP3 file is audio data play can MP3/WMA About MP3 WMA Player on time, press STOP. required permission is in order to download MP3/WMA files and music from the Internet. Our company has no to grant such permission. Permission should always be sought from the copyright owner. right Operation CD Pause with Audio and MP3/WMA Disc MP3 1 Press PAUSE/STEP WMA Repeat during playback. 2 To return to playback, PAUSE/STEP again. press PLAY or To repeat 1 press Moving CD MP3 WMA Press . or > briefly during playback to go to the next track or to return to the beginning of the current track. Press . twice track. In to briefly step back to the previous of audio CD, to go directly to any track, enter the track number using the numbered buttons (0-9) during playback. Repeat Track/All/Off CD MP3 WMA 1 To repeat the track currently playing, press REPEAT. The Repeat icon and "TRACK" appears on the menu screen. 2 To repeat all tracks on a disc, press REPEAT Repeat icon and "ALL" appears on the a CD MP3 Repeat icon and "A * " appears on the menu screen. at your chosen end point. The Repeat icon and "A B" appears on the menu screen, and the sequence begins to play repeatedly. again 3 To exit the sequence and return to normal A-B again. Repeat icon and "OFF" appears 3D Surround on the play, press menu screen. CD This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi-channel audio from a home theater system. 1 Press DISPLAY or AUDIO 3 Press 3/4 during playback. repeatedly until the desired sound is selected. menu screen. 3 To cancel Repeat mode, press REPEAT a third time. The Repeat icon and "OFF" appears on the menu screen. Search sequence. disc playback, press A-B at your chosen start- 2 Press 1/2 to select "NORM." or "3D SUR". second time. The a 2 Press A-B The case CD During ing point. The to another Track A-B Changing the Audio Channel CD Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT, or RIGHT). WMA 1 Press m or M during playback. The player will now go into SEARCH mode. 2 Press m or M repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). Search speed and direction are indicated on required or the MX2, menu screen. 3 To exit SEARCH Random mode, press PLAY. CD 1 Press RANDOM MP3 WMA during playback or when playback is stopped. The unit automatically begins Random "RAND." appears on the menu screen. Playback and playback, press RANDOM "RAND." disappears on the menu 2 To return to normal repeatedly until screen. 27 OPERATION Operation Viewing with JPEG Disc JPEG disc a JPEG Player can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on right. This DVD 1 Insert disc and close the a TV menu to another File Press . or > once advance to the next file appears on the screen. during viewing a picture or to the previous file. to Still Picture 1 Press PAUSE/STEP tray. The MP3/WMA-JPEG choice Moving during slide show. go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. The player will now MP3 WMA To JPEG flip the picture Press 3/4 2 Press 3/4 to select the JPEG then press ENTER. The JPEG menu appears on the TV screen. during showing a picture picture horizontally or a vertically. To rotate Press 1/2 JPEG picture Folder1 Folder2 to flip the picture during showing clockwise or a picture to rotate the counter clockwise. Folder3 Folder4 Folder5 Notes Folder6 Folder7 on JPEG Recordings Folder8 Slide Press 3/4 to select a Speed folder, and ENTER. 3 A list of files in the folder appears. Press RETURN to choice menu. move list, to the MP3/WMA-JPEG are a file list and want to return to the Folder the 34 buttons previous 4 in on the remote to highlight and press ENTER to return to the " menu screen. If you want to view a particular file, press 3/4 to highlight a file and press ENTER or PLAY. Viewing the file proceeding starts. During viewing a file, press RETURN the previous menu (JPEG menu). Press TITLE to to move to to the next page. Press DISC MENU to move to the previous page. JPEG move Folder1 Picture1.jpg Picture2.jpg Picture3.jpg Picture4.jpg Picture5.jpg Picture6.jpg Picture7.jpg 5/32 1024X768 Slide Speed Off 5/32 1024X768 Picture5.jpg Tip viewing Slide Speed options: Fast, Normal, Slow, and Off. Press 1/2 to highlight the Slide Speed then press 3/4 to select the option you want to There are three use, and press ENTER. To stop viewing 5 The JPEG 28 --- Total number of files and folders use " display after several minutes, some of the files are too big reduce the resolution of the JPEG files to less than 2 mega pixels and burn another disc. screen Tip If you upon the size and number of the JPEG files, it could take a long time for the DVD player to read the disc's contents. If you don't see an on- Depending Off menu at any other appears. time, press STOP. on the disc should be less than 650. Some disc may be incompatible due to different recording format or condition of disc. When you are using software such as "Easy CD Creator" to burn the jpeg files into the CD-R, ensure that all the selected files have the ".jpg" extensions when copying into the CD layout. If the files have rename them ".jpe" or ".jpeg" extensions, please as ".jpg" files. ".jpg" extension will not be able to be read by this DVD player. Even though the files are shown as JPEG image files in windows explorer. File names without Programmed Playback CD VCD2.0 with Audio CD Programmed Playback VCD1.1 function enables you to store your favorite tracks from any disc in the player memory. Program Program mode to enter during playback or in the Program Edit mode. the E mark will appear to the right of the word the right side of the menu screen. The on with Video CD Note On Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 18. a contain 30 tracks. can Press PROGRAM 1 WMA Programmed Playback and MP3/WMA disc The MP3 stop Program Insert Video CD and close the 1 2 Press PROGRAM while The VCD Program menu is playback stopped. will appear. Program VCD OPERATION tray. E TRACK 1 TRACK 2 Note TRACK 3 Press PROGRAM to exit the Program TRACK 4 Edit mode; TRACK 5 TRACK 6 E the mark will Select 2 disappear. TRACK 7 track, then press ENTER a selected track the on Clear All TRACK 8 to place the list. Program Note Repeat step 2 Program list. 3 to place E Program CD additional tracks the Program MP3 WMA TRACK 12 TRACK 2 TRACK 8 TRACK 1.mp3 TRACK 2.mp3 TRACK 3 TRACK 10 TRACK 2.mp3 TRACK 4.mp3 TRACK 4 TRACK 3 TRACK 3.mp3 TRACK 8.mp3 TRACK 3.mp3 TRACK 4.mp3 4 TRACK 5.mp3 TRACK 6 TRACK 6.mp3 TRACK 7 TRACK 7.mp3 TRACK 8.mp3 Clear All TRACK 8 STER. 0: 56: 18 Audio CD NORM. 0:00:00 Clear All 3 MP3/WMA menu menu on with left. resume normal on the TV screen. on Tracks currently playing, Repeat icon and "TRACK" appears press REPEAT. on the menu screen. To repeat all tracks on the program list, press REPEAT a second time. Repeat icon and "ALL" appears on the menu screen. To cancel Repeat mode, press REPEAT a third time. The Repeat icon and "OFF" appears on the menu screen. The Press TITLE to to the next page. Press DISC MENU to move to the previous page. move Press PLAY to start. 6 Playback begins in the order in which you programmed the tracks and "PROG." appears on the menu screen. Playback stops after all of the tracks have played once. resume playback, normal E on the Program list playback programmed exit the Program mark will track of CD disappear and (or MP3/WMA) list and press ENTER. "PROG." indicator disappears on the Erasing a then Track from Program List 1 Press PROGRAM MP3/WMA disc Program from press PROGRAM to mode; the a menu. playback from programmed playback, press PROGRAM. The 5 playing. select To Program "Programmed Playback Audio CD and MP3/WMA disc" To repeat the track programmed track you selected last is highlighted Edit 2-6 of Repeat Programmed Press 3/4 to select the track you want to start 7 steps PROGRAM to exit the OFF the program list. To Follow or "NORMAL" appears Press 2. The Press RETURN 3 E TRACK 1 TRACK 5 4 on E The during playback (Audio CD and only) or in the stop mode to enter the Edit mode. mark will appear. 2 Press 2 to move to the Program list. 3 Use 3/4 to select the track that you wish to erase from the Program list. 4 Press CLEAR. The track will be erased from the menu screen. Erasing the 1 Follow steps List" as Complete Program 1-2 of "Erasing a List Track from Program above. 2 Use 3/4 to select "Clear The Program list. All", then press ENTER. complete Program for the disc The programs are will be erased. also cleared when the disc is removed. 29 Additional On Screen Operation VCR part - Video Doctor Display You may easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your VCR will appear on the TV screen. If a recording is taking place these On Screen Displays will not be recorded onto the tape. (Self-Diagnosis) This feature informs you that there is a problem with your VCR. These error messages will appear on the TV screen. 1 Press i. Press 1 or 2 to select Dr. Press OK. 1 Press CLK/CNT to Press CLK/CNT display. repeatedly to cycle through the The tape counter and amount of tape left will appear if there is a tape loaded. display options. 12 REC 2 Displays will clear majority leaving only counter and the amount of the clock tape left or the on ACMS ON OFF TIME DATE SYSTEM VCR VCR Dr. Dr. NIC fOSD of the On Screen After 3 seconds the P R SET Pr-12 OKi OPR tape screen. VCR Press CLK/CNT the TV again to remove all displays from Dr. VIDEO DOCTOR HEAD STATUS screen. TAPE STATUS NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME OK Tape Counter Memory Stop The Counter i displayed on the display window instead of the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape. 1 Digital Tape can be PLEASE CLEAN: Clean your video heads. Press CLEAR to set the counter to 0:00:00. O or Press STOP when playback or actual play time in O recording is complete. The control buttons on the front of the unit can be switched off so that your unit can only be operated using the remote control. Press LOCK. will appear in the display window. None of the buttons on the front of your unit will work. on the front of your unit will flicker in the display pressed are window for a few seconds. Press LOCK 30 will again to switch off the child disappear in the display window. lock. tape with its protection tab in place 2Shows the number of timer recording. NEXT TIMER PROGRAMME O PR-01 26 10:00~11:00SP Shows the current status of timer 3 Child Lock a NO. OF TIMER PROGRAMME Press BACKWARD. If any buttons NOT RECORDABLE: Insert start recording. will display the problem. HEAD STATUS O The tape will rewind and automatically stop when the counter returns to 0:00:00. 2 to check a TAPE STATUS The tape counter hours, minutes and seconds. 1 3 or 4 Press CLK/CNT. Press PLAY 2 2 Press Press i. recording. Additional Operation Hi-Fi Stereo Sound VCR part - System Your VCR will record and playback Hi-Fi stereo sound. In addition it has a stereo NICAM digital stereo sound decoder. This allows you to record and playback the sound in several different ways. Video cassettes recorded on your VCR will have a normal mono audio track OPERATION and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc 1 Your VCR's NICAM or another Hi-Fi VCR. digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound. The particular type of sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds: STEREO NICAM Sound is and automatically recorded the Hi-Fi stereo on tracks of the video tape. BIL NICAM mono Both audio channels will be recorded stereo tracks. The will be recorded on primary language the mono on the Hi-Fi channel (left) track of the video tape. MONO The sound is recorded mono on the Hi-Fi tracks and the track of the video tape without any Press AUDIO repeatedly separation. until the desired audio 2 mode appears. 3 The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language will be output from both channels when the audio setting is MONO. Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to MONO. 31 Additional Operation Last Condition DVD This CD player - DVD part Video Mode Memory VCD1.1 memorizes the VCD2.0 VCD1.1 user settings playback picture may be flickering or Dot Crawl is shown on straight lines. That means Vertical interpolation or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the for the last disc If you load a disc that has its settings memorized, the latest stop position is automatically recalled. player. video mode. the video mode, press and hold DISPLAY about 3 seconds during disc playback. The new video To Notes -- DVD With certain discs, the that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the -- Setting change displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. mode number selected is Settings are stored in memory for use any time. This player does not memorize settings of a disc if you switch off the player before commencing to play it. Video mode sequence: MODE1 Screen Saver The DVD Player MODE2 → MODE3 → MODE1 If you turn off the power, the video mode will return to initial default state (MODE1). appears when you leave the in stop mode for about five minutes. screen saver → picture Detailed MODE1 : The Description source of each Video Mode material of the DVD video (film material material) is determined from disc information. MODE2 : Suitable for playing film based content or video based material recorded by the progressive scan method. MODE3 : Suitable for playing video based content with comparatively little motion. or video Note The video mode setting only Progressive Scan menu. 32 works when the mode is set to "On" on the setup Special Recording Copying from DVD To VCR This unit allows you to copy the contents of VHS tape with a press of the COPY button. Recording a DVD to a sure setup recorder "Progressive Scan" to set or a can make copying recordings from from another video camcorder. to "Off" on the menu. If the DVD you protected, 1 recorder With this video recorder you an external source, such as Note Be from another video Note attempting to copy is copy you may not be able to copy the disc. are In the following description, this video recorder will be one used for recording and will be referred to as VCR B. The other appliance will be used for playback and Insert Disc Insert the disc you wish to copy in the DVD deck and close the disc tray. 1 2 Insert VHS Insert a 3 Copy the DVD to VHS Tape blank VHS videotape Press the COPY button Tape on the unit front panel or If the DVD disc Play menu button appears, you may need to manually to 2 4 When the VCR A should be connected to the AUDIO L/R (VCR panel IN AV1)/VIDEO (VCR IN AV1) on the rear (L(MONO)/R) / Insert the recorded tape into VCR A and tape into VCR B. a blank 3 displayed. (VCR B) begin copying. recording from AUDIO VIDEO (VCR IN AV1) terminals AV 1 for L/R on (VCR the IN rear AV1)/ of your unit. If you press the REC/ITR button, be DVD mode. the VCR A. Press AV until the socket you wish to record from is Note Stop as of your unit or AUDIO IN VIDEO IN on the front panel of your unit. into the VCR deck. press the REC/ITR button. The DVD will go into Play mode and the VCR will go into Record mode. press the will be referred to Copy sure end the copy. You must stop the Copy the DVD movie ends, record over and over or playing, press STOP to process manually when the unit may replay and recording from AUDIO IN VIDEO IN terminals To start Process DVD is finished AV 2 for this unit in 4 and 5 on the front of your unit. press the REC/ITR VCR A. recording, PLAY on (L(MONO)/R)/ When you want to finish on both video recorders. copying, on VCR B press the STOP again. 33 OPERATION Controlling You Your TV with the control the sound level, input source, and power switch of your LG TV with the supplied remote control. can Controlling can control your TV using the buttons below. other TVs with the remote control You You Remote Control Supplied control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer can code. 1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV 2. TV Control Buttons (see the table below). Release TV POWER button. Code numbers of controllable TVs If more them than at a one code number is listed, try entering time until you find the one that works with one your TV. By pressing You TV POWER Turns the TV TV AV Switch the TV's can on or input input MUTE Turns the volume of the TV. on or 1 Zenith 1,3,4 Samsung 6,7 Sony 8,9 Hitachi 4 off TV sound function on your TV, 2 on If you enter previously a new all buttons may not after entering the correct some or the TV, even manufacturer code. code number, the code number entered will be erased. When you replace the batteries of the remote, the code number you have set may be reset to the default again. 34 (Default), Notes Depending Scans up or down through memorized channels. Adjust LG / GoldStar source sources. TV VOL +/-- Code Number off. between the TV and other TV PR +/-- Manufacturer setting. Set the appropriate code number Troubleshooting Check the following guide for the possible cause VCR do not or work properly. before problem a service. contacting Cause Symptom DVD of DVD or Correction VCR button is not switched Refer to page 2. properly. No power. The power cord is disconnected. Plug the power securely. The power is on, but the DVD player does not work. No disc is inserted. Insert The TV is not set to receive DVD Select the on the TV No picture. signal output. a player No sound. securely. securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard(analog) television. Set The equipment connected with the audio cable is not set to receive DVD Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. are not connected The DVD not start player does playback. properly. The Set the The disc is dirty. The TV channels An unplayable are is set to the not tuned in properly. placed upside placed Clean the disc. Check tuning, carry out Place the disc with the down. down. within the Digital Audio Output to the correct position, then turn on the DVD player again by pressing POWER. tuning again. Insert a playable disc. (Check the disc type and Regional code.) disc is inserted. guide. playback Place the disc on the disc tray inside the guide. The disc is dirty. Clean the disc. The level is set. Cancel the Rating function the rating level. Rating There is an obstacle in the path of the remote control and this unit. Remove the obstacle. The batteries in the remote control exhausted. Replace Is the cassette compartment No Hi-Fi sound Audio mode is not set No NICAM sound NICAM mode is not set Video Head jacks Turn on the equipment connected with the audio cable. Video tape cannot be inserted. recording Connect the audio cable into the The power of the equipment connected with the audio cable is turned off. The disc is not does not work to "Off" securely. The disc is The remote control Progressive Scan (see page 17). jacks securely. Digital Audio Output wrong position. is poor. appropriate video input mode so the picture from the DVD appears on the TV screen. Connect the video cable into the The audio cables picture disc. The video cable is not connected signal output. The cord into the wall outlet are empty? properly. properly. Eject the batteries with or side correctly change new ones. the tape in. Select "STEREO" by repeatedly "AUDIO" on the remote control. pressing Make sure NICAM in the menu is set to AUTO for the station to be recorded. Cleaning Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned. This should mean that additional head cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. 35 REF NC Language Code List Enter the appropriate (See page 17). code number for the initial settings "Disc Audio", "Disc Subtitle" and/or "Disc Menu" Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Ameharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili 6583 Assamese 6976 Greek 7773 Maori 8386 Swedish 6588 Aymara 7576 Greenlandic 7782 Marathi 8476 Tagalog 6590 Azerbaijani 7178 Guarani 7779 Moldavian 8471 Tajik 6665 Bashkir 7185 Gujarati 7778 Mongolian 8465 Tamil 6985 Basque 7265 Hausa 7865 Nauru 8484 Tatar 6678 Bengali; Bangla 7387 Hebrew 7869 Nepali 8469 Telugu 6890 Bhutani 7273 Hindi 7879 Norwegian 8472 Thai 6672 Bihari 7285 Hungarian 7982 Oriya 6679 Tibetan 6682 Breton 7383 Icelandic 8065 Panjabi 8473 Tigrinya 6671 Bulgarian 7378 Indonesian 8083 Pashto, Pushto 8479 Tonga 7789 Burmese 7365 Interlingua 7065 Persian 8482 Turkish 6669 Byelorussian 7165 Irish 8076 Polish 8475 Turkmen 7577 Cambodian 7384 Italian 8084 Portuguese 8487 Twi 6765 Catalan 7465 Japanese 8185 Quechua 8575 Ukrainian 9072 Chinese 7487 Javanese 8277 Rhaeto-Romance 8582 Urdu 6779 Corsican 7578 Kannada 8279 Rumanian 8590 Uzbek 7282 Croatian 7583 Kashmiri 8285 Russian 8673 Vietnamese 6783 Czech 7575 Kazakh 8377 Samoan 8679 Volapuk 6865 Danish 7589 Kirghiz 8365 Sanskrit 6789 Welsh 7876 Dutch 7579 Korean 7168 Scots Gaelic 8779 Wolof 6978 English 7585 Kurdish 8382 Serbian 8872 Xhosa 6979 Esperanto 7679 Laothian 8372 Serbo-Croatian 7473 Yiddish 6984 Estonian 7665 Latin 8378 Shona 8979 Yoruba 7079 Faroese 7686 Latvian, Lettish 8368 Sindhi 9085 Zulu 36 Country Enter the Code List appropriate code number for the initial setting "Country Code" (See page 19). Code Country Code Country Code Country Code AD Andorra ER Eritrea LC Saint Lucia SC Country Seychelles AE United Arab Emirates ES Spain LI Liechtenstein SD Sudan AF ET Ethiopia LK Sri Lanka SE Sweden AG Afghanistan Antigua and Barbuda FI Finland LR Liberia SG Singapore AI Anguilla FJ Fiji LS Lesotho SH Saint Helena AL Albania FK Falkland Islands LT Lithuania SI Slovenia AM Armenia FM Micronesia LU Luxembourg SJ Svalbard and Jan AN Netherlands Antilles FO Faroe Islands LV Latvia AO Angola FR France LY Libya SK Slovak AQ Antarctica FX France MA Morocco SL Sierra Leone AR Argentina (European Territory) MC Monaco SM San Marino AS American Samoa GA Gabon MD Moldavia SN Senegal AT Austria GB Great Britain MG Madagascar SO Somalia AU Australia GD Grenada MH Marshall Islands SR Suriname AW Aruba GE MK Macedonia ST Saint Tome and AZ Azerbaidjan GF Georgia French Guyana ML Mali SU Former USSR BA Bosnia-Herzegovina GH Ghana MM SV El Salvador BB Barbados GI Gibraltar MN Myanmar Mongolia SY Syria BD Bangladesh GL Greenland MO Macau SZ Swaziland BE Belgium GM Gambia MP Northern Mariana Islands TC Turks and Caicos Islands BF Burkina Faso GN Guinea MQ Martinique (French) TD Chad BG Bulgaria GP MR Mauritania TF French Southern BH Bahrain GQ Guadeloupe (French) Equatorial Guinea MS Montserrat BI Burundi GR Greece MT Malta TG Togo BJ Benin GS S. MU Mauritius TH Thailand BM Bermuda Isls. MV Maldives TJ Tadjikistan BN Brunei Darussalam GT Guatemala MW Malawi TK Tokelau BO Bolivia GU Guam MX Mexico TM Turkmenistan BR Brazil GW Guinea Bissau MY TN Tunisia BS Bahamas GY MZ TO Tonga BT Bhutan HK Guyana Hong Kong Malaysia Mozambique NA Namibia TP East Timor BV Bouvet Island HM Heard and McDonald NC New Caledonia TR Turkey BW Botswana Islands NE Niger TT Trinidad and BY Belarus HN Honduras NF Norfolk Island TV Tuvalu BZ Belize HR Croatia NG Nigeria TW Taiwan CA Canada HT Haiti NI Nicaragua TZ Tanzania CC Cocos HU Hungary NL Netherlands UA Ukraine CF (Keeling) Islands Central African Republic ID Indonesia NO Norway UG Uganda CG Congo IE Ireland NP Nepal UK United CH Switzerland IL Israel NR Nauru UM CI Ivory Coast IN India NU Niue CK Cook Islands IO British Indian Ocean NZ New Zealand US United States CL Chile Territory OM Oman UY Uruguay CM Cameroon IQ Iraq PA Panama UZ Uzbekistan CN China IR Iran PE Peru VA Vatican CO Colombia IS Iceland PF VC Saint Vincent & CR Costa Rica IT Italy PG Polynesia (French) Papua New Guinea CS Former Czechoslovakia JM Jamaica PH Philippines VE Venezuela CU Cuba JO Jordan PK Pakistan VG CV Cape Verde JP Japan PL Poland VI Virgin Islands (British) Virgin Islands (USA) CX Christmas Island KE PM Saint Pierre and VN Vietnam CY Cyprus KG Kenya Kyrgyzstan PN Pitcairn Island VU Vanuatu CZ Czech KH Cambodia PR Puerto Rico WF Wallis and Futuna Islands KI Kiribati PT Portugal WS Samoa DJ Republic Germany Djibouti KM Comoros PW Palau YE Yemen DK Denmark KN Saint Kitts & Nevis PY Paraguay YT DM Dominica KP North Korea QA Qatar YU Mayotte Yugoslavia DO Dominican KR South Korea RE Reunion ZA South Africa DZ Algeria KW Kuwait RO Romania ZM Zambia EC Ecuador KY Cayman Islands RU Russian Federation ZR Zaire EE Estonia KZ Kazakhstan RW Rwanda ZW Zimbabwe EG Egypt LA Laos SA Saudi Arabia EH Western Sahara LB Lebanon SB Solomon Islands DE Republic Georgia & S. Sandwich (USA) Anguilla Mayen Islands Republic Principe Territories (French) Tobago Kingdom USA Minor Outlying Islands Miquelon (French) City State Grenadines 37 REF NC Specification General Power requirements AC 110-240V, 50/60 Hz Power consumption 19W Dimensions Mass 430 X 78.5 X 270 (approx.) 4.2 (approx.) (w/h/d) mm kg Operating temperature 5˚C to 35˚C Operating humidity 5%to90% Timer 24 hours display tape RF Modulator UHF 22 68 - (41˚F to 95˚F) (Adjustable) System Laser Semiconductor laser, Video Head system Double azimuth 4 heads, helical Signal system PAL Frequency DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto22kHz response wavelength 650 nm scanning. CD:8Hzto20kHz ratio Signal-to-noise (ANALOG OUT More than 100dB Harmonic distortion Less than 0.008% Dynamic More than 100 dB range More than 95 dB connectors only) (DVD) (CD) Inputs (VCR) Audio -6.0dBm, more Video 1.0 75 ohms, unbalanced Vp-p, than 47 kohms Outputs (DVD) VIDEO OUT 1 S-VIDEO OUT (Progressive Scan) (Y) 1.0 Vp-p 75 ohms, negative sync., Mini Din 4-pin (C) 0.3 Vp-p 75 ohms (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 Audio output (coaxial audio) 0.5V(p-p),75Ω,RCAjackx1 Audio output (optical audio) 3 V Audio output (analog audio) 2.0 Vrms COMPONENT VIDEO OUT Vp-p 75 ohms, sync (p-p), 75 negative Ω, Optical (1 KHz, 0 dB), connector 600 x x 1 1 Ω, RCA jack (L, R)x2 Outputs (VCR) Audio -6.0dBm, less than 1 kohms Video 1.0Vp-p, Design and specifications are Manufactured under license from subject to change 75 ohms, unbalanced without notice. Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol Laboratories. "DTS" and "DTS Digital Out" 38 are trademarks of Digital Theater Systems, Inc. are trademarks of Dolby SAFETY PRECAUTION JEDDAH MAIN SERVICE CENTER THIS EQUIPMENT MUST BE DISCONNECTED FROM P.O.BOX 704, JEDDAH 21421 KINGDOM OF SAUDI ARABIA THE MAINS POWER SUPPLY WHEN IT IS NOT IN TEL) 02-629-2929 USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO Toll Free 800-244-2929 RAIN OR MOISTURE. RIYADH BRANCH SERVICE CENTER TEL) CAUTION 01-461-5559 EXT. 119,145 AL KHOBAR BRANCH SERVICE CENTER TO PREVENT ELECTRIC SHOCK, DO NOT TEL) 03-858-0929 liquid into REMOVE THE COVER. NO USER SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. If you pour a cold air will condense WARNING THE RECORDING AND PLAYBACK OF CERTAIN cause PERMISSION. The working delivery to consumer. Upon the expiry od, it might be unsuitable for the use of the said according peri- to their designation. Please read these precautions before you operate this unit. ? ? Avoid extreme heat, cold, moisture and dust. Avoid using near a magnetic field. (This will adversely ? affect the units Be careful when the surface of the with a case is wiped benzene, alcohol, thinchemically processed cloth, the sur- volatile agent such ner, etc. or a ? performance.) as face finish may deteriorate or its coating may peel. Use the unit only in a horizontal position, and do place anything heavy on it. Keep the unit away from flower vases, tubs, sinks, etc. If any liquids should spill into unit, serious damage could occur. In that case, please consult qualified service personnel. Do not obstruct the ventilation holes: they prevent overheating. Even soft materials such as paper and not ? ? ? cloth may prevent proper ventilation of the unit. There are no serviceable parts inside. For serv- ice, please contact your service centre. water vapor in the the surface of the glass. This is on the of the most crucial parts of the unit, will to the tape. one damage When this set is life of this set is 7 years since the date of glass, moisture condensation. Moisture condensation head drum, MATERIAL MAY NOT BE DONE WITHOUT on a exposed to a rapid temperature change from cold to warm, some condensation will occur. Under this condition, connect the power cord to the AC line, press POWER button for the unit to dry out. on and allow at least two hours P/NO : 3834RV0021W Printed in Indonesia
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement