LG V8716W Owner’s Manual

LG V8716W Owner’s Manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V8716W
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
CAUTION
To reduce the risk of electric
Warning:
shock, do
of this
not
product.
iceable
the
remove
There
are no user-serv-
parts inside. Refer servicing
qualified
service
Warning:
To reduce the risk of fire
shock, do
product
to
or
to
personnel.
electric
rain,
back
cover or
or
not expose this
dripping
SERIAL NUMBER:
splashing water,
not place objects
or
moisture. Do
filled with water such
as
vases,
on
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
the
product.
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Warning:
To
prevent direct exposure
Never stare
laser beam.
directly
Caution: Do not install this
confined space such
similar unit.
as a
grip for the plug fitted to this product is built into
the existing power cord as supplied. if, for any reason you
need to shorten the cord.
to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Warning:
The cord
A
plug must be used to ensure your continued safety
by securing the plug to the power cord in accordance with
Plug & Socket Regulations 1994.
into the
Features:
product
book
in
a
case or
?
Complete versatility
or VHS Tapes.
?
Watch
?
?
?
Notes
on
new
a
DVD while
to
play DVD, DivX, VCDs, audio CDs
recording
a
TV show to the VCR.
Remote controls both DVD and VCR decks.
Records from DVD to VHS
with Macrovision).
(unless
DVD is copy
protected
Hi-Fi Stereo VCR.
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Important
notes on
controlling
this
unit
This unit uses one set of controls to operate both
DVD and VCR. The following buttons are helpful in
successfully controlling each part.
1.
2.
3.
4.
POWER Button
Press the POWER button on the remote control
or front panel to turn on this unit.
DVD Button
Press DVD button on the remote control when
you want to control the DVD.
VCR Button
Press the VCR button on the remote control
when you want to control the VCR.
The VCR indicator will light on the front panel
display to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button on the front panel to
toggle control between the DVD and the VCR.
2
Contents
PlayingaDVDorVideoCD...............26-28
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................26
MovingtoanotherTITLE...............26
.26
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................26
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.
.26
.27
SlowMotion.........................27
Random............................27
RepeatA-B..........................27
Repeat.............................27
3DSurround.........................27
TimeSearch.........................27
Zoom..............................28
MarkerSearch.......................28
SpecialDVDFeatures...................28
TitleMenu..........................28
DiscMenu..........................28
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................28
.28
ChangingtheAudioLanguage
.
ConnectingtoaTV.....................10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually.
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-22
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-22
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................18
MenuLanguage....................18
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
.
.
.
.
.
.
.
TVAspect.........................19
DisplayMode......................19
ProgressiveScan...................19
AUDIO.............................20
.20
.20
.20
Vocal.............................20
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)
DynamicRangeControl(DRC).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
OTHERS...........................21
PBC.............................21
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
CountryCode......................22
.
.
.
.
.
.
.
.
.
.
.
Operation....................23
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Subtitles............................28
PlayinganAudioCDorMP3/WMADisc
.
.
.
.
.
.
.29
.30
AudioCDandMP3/WMADiscFeatures
Pause..............................30
.
.
.
.
.
MovingtoanotherTrack................30
RepeatTrack/All/Off...................30
Search.............................30
Random............................30
RepeatA-B..........................30
3DSurround.........................30
ProgrammedPlayback.....................31
.31
RepeatProgrammedTracks.
.31
ErasingaTrackfromProgramList
.31
Erasing the Complete Program List
ViewingaJPEGDisc......................32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................32
StillPicture..........................32
MovingtoanotherFile.................32
Zoom..............................32
Torotatepicture......................32
To listen to MP3/WMA music watching picture
.32
.33
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................33
PlayingaDivXMovieDisc................34
Additional Features-VCR
part
.
.
.
.
.
.
.
.
.
.35-36
.
OnScreenDisplay....................35
TapeCounterMemoryStop.............35
Lock(ChildLock).....................35
.35
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............36
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................37
LastSceneMemory...................37
ScreenSaver........................37
VideoModeSetting...................37
Controlling other TVs with the remote control 37
CopyingfromDVDToVCR...............38
.38
Recording from another video recorder
.
.
.
.
Reference....................39
LanguageCodes.......................39
CountryCodes.........................39
Troubleshooting........................40
Specification..........................41
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes
Symbol
Used in this Manual
on
Handling
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
Discs
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
making
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has
is
applicable only
symbol.
to the disc
of the
following symbols
represented by the
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
4
one
DivX Discs
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "2"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
play
can
"ALL".
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
This indicates
?
2
Codes
Most DVD discs have
numbers in it
or
"2"
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
a
Notes:
?
?
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
Do not
(the
use
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
Manufactured under license from
Dolby
Laboratories. "Dolby", "Pro Logic", and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS
Digital Out
Digital Theater Systems,
are
trademarks of
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
are
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
Gigabytes
and double-sided discs hold twice
as
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
VCD
and cast interviews could be title 3. Each title is
much. There
are no
dual
layer single
sided recordable
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
Title
assigned
easily.
a
reference number
stereo sound.
quality
Chapter (DVD video discs only)
A chapter is a segment of a title such
MPEG
MPEG is
an
you to locate it
enabling
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
JPEG
A distinct element of audiovisual information, such
Expert Group. JPEG is a compressed
that allows you to save images with no limit
Joint Pictures
file format
on
the number of colors.
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
DivX
track of video
DivX is the
of
name
which is based
on
a
revolutionary
the
new
MPEG-4
standard for video.You will be able
movies
6
using
this DVD
new
player.
video codec
compression
to play DivX
of audio.
(with multiple angles)
and several tracks
Front Panel
POWER
Tape Eject
Switches the unit to ON
or
OFF.
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
a
fast
to PREVIOUS
reverse
chapter/track.
search.
Rewinds the tape.
Forward
Skip/Scan, Fast-Forward (
NEXT chapter/track.
Go to
Press and hold for two seconds for
)
fast forward search.
a
Winds the tape forwards.
STOP ( A ) Stops playback.
Disc
Tray
Insert
a
disc here.
PAUSE/STEP
Pause
press
( /
)
playback temporarily /
repeatedly for frame-by-frame playback.
DVD/VCR Selector
VCR Record
DVD OPEN/CLOSE
Opens
or
(
)
Tape Compartment
closes the disc tray.
EJECT
COPY
PROG.
DVD/ VCR
POWER
DVD to VCR
Copy
Display
Button
window
(L/R)
Jacks
Shows the current status of the unit.
Video IN Jack
PLAY
( G)
Starts playback.
Display
Audio IN
Remote Sensor
Channel
Point the remote control here.
Programme Selectors.
Window
Indicates current title number
Programmed playback
CHPTRK
chapter or track number
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when no disc is loaded.)
active.
Indicates repeat mode.
Indicates current
Bilingual
Video CD is inserted.
mode
Indicates total
VCR deck is
selected.
playing time/elapsed
The current TV show
or
video is broadcast in stereo
DVD to VCR copy is in progress
DVD disc is
inserted.
VCR
recording
is
engaged
The Hi-Fi track of
Audio CD
a
VHS tape is playing
Cassette-In indicator
is inserted.
WMA disc is
inserted.
A timer
MP3 disc is
inserted.
Indicates TV
mode.
(See Notes on
page 24.)
time/current time
VCR VCD
PROG
TITLE CHPTRK
BIL
STEREO COPY
DVD RPT ALL AB
TV
Hi-Fi
is
recording
programmed
or
in progress
Child Lock is
engaged
P/SCAN
Indicates the
Progressive Scan
is set to On mode.
7
Remote Control
POWER
Switch this unit ON
OPEN/CLOSE
EJECT
Open or close the the disc
OFF.
or
DVD/VCR select button
Selects operational mode of
remote control.
-
Select input
into tape.
(see
TV VOL +/--:
or
picture
PAUSE/STEP (
) ?
Pause playback temporarily / press
repeatedly for frame-by-frame
?
?
?
?
FGDE(left/right/up/down)
menu
?
ANGLE
camera
angle
if available
ZOOM
video
image.
input sources
(Child Lock)
LOCK
Switch the Child Lock
-
Play
language.
REC/ITR
Record your
-
-
language (DVD).
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
Select the
subtitle
a
Enlarge
PR/TRK(+/-)
-
audio
Select DVD
counter.
-
an
SUBTITLE
Select
Access the On-Screen Display.
Shows you the current time or
?
ENTER/OK
menu selection.
the title
available.
?
?
Repeat sequence.
recording speed of
and off.
menu
of the disc if
PROGRAM
Access
?
on
into tape.
TITLE
Display
DISC MENU
of a DVD disc.
A-B/LP
AUDIO
Select
DISPLAY
CLK/CNT
menu
off TV sound.
Access or remove setup menu.
RETURN
Displays the menu of a video CD
with PBC.
?
Access
on or
SETUP/ i
playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
Acknowledge
source.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
-
off the TV.
Adjusts TV's volume.
MUTE: Turns
-
item in the
recording
TV PR +/--: Selects TV's channel.
forward.
VCR: Rewinds the tape during the
STOP mode, for fast reverse picture
search and Advances the tape during
an
on or
TV AV: Selects the TV's
(m/M)
Select
for
37)
p.
TV POWER: Turns
BACKWARD / FORWARD
the STOP mode, fast forward
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
DVD: Search backward
Tape Eject.
AV
0-9 numerical buttons
Select numbered items in a menu.
-
tray.
-
or remove
program
menu.
MARKER
Mark any point during playback.
?
SEARCH
Display MARKER SEARCH menu.
the tape.
RANDOM/CM SKIP ?
tracks in random order.
CM SKIP
?
CLEAR
Clear
track number on the
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT
Repeat chapter, track, title, all.
-
-
a
-
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
Detach the
8
battery
cover on
the
rear
of
the remote control, and insert two batnew
batteries and
different types of batteries such
alkaline, etc.
installation
and
press the buttons.
Do not mix old and
battery
as
never
standard,
mix
AAA AAA
teries
(size AAA)
aligned correctly.
with
and
Rear Panel
AERIAL
Connect the aerial
this
using
jack.
AUDIO IN
Receive
(Left/Right) (VCR IN AV1)
the audio signals from an external
source
to VCR.
AUDIO OUT
Connect to
(Left/Right) (DVD/VCR OUT)
an amplifier, receiver or stereo system.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
(Y
Pb
Pr)
OUT)
TV with Y Pb Pr
inputs.
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
AC Power Cord
Connect to
a
power
source.
OPTICAL
(Digital audio out jack)
Connect to digital (optical) audio equipment.
S-VIDEO OUT
Connect to
a
(DVD
TV with
EXCLUSIVE
OUT)
S-Video input.
COAXIAL
(Digital audio out jack) (DVD EXCLUSIVE OUT)
Connect to digital (coaxial) audio equipment.
VIDEO OUT
Connect to
VIDEO IN
(DVD/VCR OUT)
a TV with video inputs.
(VCR
IN
Receive the video
AV1)
signals
from
an
external
source
to VCR.
RF.OUT
(DVD/VCR OUT)
Connect to your TV using this jack.
Do not touch the inner
panel. Electrostatic
damage to the unit.
pins of the jacks on the rear
discharge may cause permanent
9
Installation and
Setup
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
Tips:
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Depending
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page
11.
Caution:
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting
to a TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's input to COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV' s
input to S-VIDEO.
Basic connection
1.
2.
2.
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT jacks on the unit to the corresponding in
jacks on the TV using the Y Pb Pr cable.
2.
Connect the Left and Right AUDIO OUT jacks of the
unit to the audio left/right in jacks on the TV using the
audio cables.
Notes:
Set the
Progressive to "On" on the setup menu for
progressive signal, see page 19.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the display
window.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack) or S-VIDEO
connection.
Rear of this unit
(DVD
exclusive out
Pr
connection)
R
R
(AV)
L
L
Connect the VIDEO jack on this unit's DVD/VCR
OUT to the video in jack on the TV using the video
cable.
Connect the Left and Right AUDIO jacks of this
unit's DVD/VCR OUT to the audio left/right in jacks
on the TV using the audio cables.
Basic connection
1.
1.
Pb
Y
(RF)
Connect the antenna cable from your indoor/ outdoor antenna to AERIAL jack on the rear panel of
this unit.
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input.
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
Pr
Pb
AUDIO INPUT
Y
L
S-VIDEO INPUT
R
DVD exclusive out connection
Component
1.
2.
Video
(Color Stream )
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the unit to the corresponding in jacks on the TV using an Y Pb Pr
cable.
Connect the Left and Right AUDIO OUT jacks of
the unit to the audio left/right in jacks on the TV
using the audio cables.
S-Video connection
1.
2.
Connect the S-VIDEO OUT jack on this unit to the
S-Video input jack on the TV using the S-Video
cable.
Connect the Left and Right AUDIO OUT jacks of
this unit to the audio left/right in jacks on the TV
using the audio cables.
Progressive
Scan
(ColorStream Pro)
connection
If your television is a high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
10
Pr
R
R
L
L
Pb
Y
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect this unit with the
S-video cable. When using an S-video cable, do not connect the yellow video cable.
Connecting
Optional Equipment
to
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II/Pro Logic
two
Connect the Left and Right AUDIO OUT jacks on this
unit to the audio left and right in jacks on your amplifier, receiver or stereo system, using the audio cables.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound
or no
sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
1.
Connect this unit's DIGITAL AUDIO OUT
jack
the corresponding
an optional digital
(OPTICAL or COAXIAL) to
jack on your amplifier. Use
(optical or coaxial) audio cable.
2.
You will need to activate this unit's
(See "AUDIO"
Digital
on
page
in
digital output.
20).
Multi-channel sound
A
digital multi-channel
sound quality. For this
connection provides the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Warning:
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
Both DVD and
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
DVD exclusive out
VCR out
multichannel
connection
COAXIAL
AUDIO INPUT
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
11
Before
Tuning in
your TV
a
Operation-VCR part
video channel
on
Notes:
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
Your TV receives signals from the video
recorder (VCR) like another TV station. You
have to select a channel number on your TV
and tune it in so that you may watch video
tapes. If you have used AUDIO and VIDEO
cables then your TV should already have a
dedicated video channel built into it, usually
called AV.
~
1.
2.
Make sure that you have correctly installed your
VCR as described earlier in this book.
Press POWER to turn on your VCR.
Turn on your TV.
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play
at this stage! If you switch your VCR on and
continue stages 3
4, instead of seeing video
playback tune your TV until you see a bright blue
~
7.
Press PROG. 3 or 4 to select another video
channel. You may select any channel number
between 22 and 68.
You can also set it to "OFF" if there is any
interference when your TV is connected to the
VCR with a RCA lead.
8.
Select a TV channel number on which you wish to
watch video's.
Press
POWER on the front of your VCR when
you have finished.
Tune this channel so that a bright blue screen
appears.
Store this channel
on
your TV.
Note:
Make sure that you have correctly installed your
VCR and successfully tuned in a dedicated
video channel on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
Using
your VCR for the very first
time
Following picture will display on the TV screen
when you have just connected your video
recorder for the very first time.
TV
To make
tuning
3 to 4
shown "ACMS"
as
stations, please follow stages
screen.
(see p.14).
3.
Tune this channel until the video picture is sharp
and the sound is clear.
If you have used AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is already pre-tuned for
optimum video playback on your TV.
4.
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
8 if you cannot
carry out stages 5
obtain clear video playback as described in
4. Select a TV channel number on
stages 1
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be displayed).
Only
~
~
6.
Press PROG. 3 or 4 on the front of your VCR for
more than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
RF
PSET
R
12
CHANNEL
36
ACMS
Pr-12
ACMS
Setting
the clock
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
Press i.
Press 1
or
2 to select TIME DATE.
Press OK.
To set the colour system
1.
Press i.
2.
The main
3.
Press 1
or
4.
Press 3
or 4
menu
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
to select
according
to the COLOUR
system used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
VCR
TIME
DATE
REC
E
Dr.
fOS
ON
OFF
2.
Use the numbered buttons
to alter the
the remote control
on
HOURS, MINUTES, DAY, MONTH and
YEAR.
5.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
of the week will appear
when you enter the year.
The
day
OPR
2 to select the RF AUDIO.
Press 1
or
Press 3
or 4
to select
according
to the RF AUDIO
used.
automatically
VCR
REC
E
Dr.
fOS
ON
OFF
HHMNDDMMYY
8
:.
00101
.
OPR
THU
6.
Press i to
remove
the
menus
from the TV
screen.
TIME
DATE
3.
If you make a mistake press 1
correct details.
4.
Press i.
or
2 and enter the
13
How to
using
the main
This VCR
easily
displayed
be
the
can
menus
The
menus are
menu
programmed by using
on screen.
controlled from the Remote
Control Handset.
1.
Switch
pressing
2.
your TV set and video recorder
the POWER button.
on
by
will appear
menu
on
the TV
Tuning
Automatically
is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
If the TV broadcast
signal
this
turn to the MANUAL TUNING
problem please
section
Press i button.
The main
in TV Stations
on
page 15.
1.
Press POWER to turn
2.
Press i button.
your VCR.
on
screen.
The main
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
VCR
PSET
R
Pr-12
ACMS
TIME
DATE
SYSTEM
Dr.
NIC
fOSD
ON
OFF
OPR
12
REC
REC
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
TIME DATE Date & clock setting (see p. 13).
SYSTEM To set the Colour TV System
(see p. 13).
Dr. To check a problem with your VCR
(see p. 35).
F.OSD ON/OFF To display the operational
-
PSET
R
fOSD
ON
OFF
Pr-12
TIME
DATE
VCR
SYS-
Dr.
TEM
Pr-12
NIC
OPR
-
-
-
-
ACMS
-
Pr-12
ACMS
-
mode of your VCR
(see
OPR
O
NIC
To
improve the
(see p. 23).
-
-
To activate
sound
(see
or
3.
digital
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
E
Pr-12
can
Press 1 and 2 to select the desired
Press i to
remove
the
or 4
menu.
from the TV
The TV STATION TABLE will appear when
is complete.
Press i to
to select.
menus
4.
screen.
settings.
save
your
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
14
tuning
ACMS
Press OK and press 3
4.
01
S
change the menu language on the DVD
setup menu. (See the Menu Language on page 18.)
3.
to start the automatic
36).
p.
Tip:
You
again
process.
35).
playback picture
p.
deactivate the NICAM
Press OK
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
Manually
4.
Searching
will
stop when it locates
areas
Press 3
or 4
to
correctly.
adjust.
PR
CH
09
C10
You must tune in these weaker broadcast
manually
in order for your VCR to store
MFT
STATION
CHANNEL/CABLE
:
AV
PSET
R
them.
1.
station.
Press 2 to select MFT.
of the country broadcast signals
may be too weak for your VCR's automatic
tuning process to find or assign TV stations
stations
a
5.
Press i.
The main
will appear on the TV
2 to select the PR SET.
menu
Press 1 or
Press OK.
Press 2 to select STATION
C09
ACMS
fOSD
NIC
ON
OFF
TIME
DATE
SYSTEM
name
CH
MFT
C10
00
STATION
PSET
R
VCR
REC
that you may
your TV station.
Press OK.
screen.
PR
Pr-12
so
Dr.
OPR
6.
or 4
the
station
new
Press 1
PR
CH
01
MFT
STATION
00
PR-01
CHANNEL/CABLE
to select letters and numbers for
Press 3
or
name.
2 to
move
back and forth between
characters.
Press OK.
:
AV
PSET
R
PR
2.
Press i.
C09
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune (for example, PR 09).
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
CH
MFT
C10
00
STATION
PSET
R
7.
Press i, confirm the station
Press i again.
Your
new
TV station has
now
placement.
been tuned into your
VCR.
If you wish to
stages 1 7.
manually
tune other stations
repeat
-
PSET
R
MOVE
:
DELETE
:
,
10
3.
11
Press OK.
12
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
13
14
15
16
-
S41.
PSET
R
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
Enter the channel number of station that you want
to tune with the numbered buttons or use 3 or 4
to find the
required
PR
09
station.
CH
MFT
STATION
--
----
CHANNEL/CABLE
:
AV
PSET
R
15
Changing
the order of TV Stations
After tuning TV stations into your VCR you may
wish to change the order in which they are stored
without having to retune them. The instructions given
on this page will show you how you can simply
move them into your desired order.
1.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
TV Stations
Deleting
After tuning TV stations into your VCR you may
wish to delete a station.
The instructions given on this page will show you
how easily delete any unwanted TV stations.
1.
screen.
Press i.
The main menu will appear on the TV
Press 1 or 2 to select the PR SET.
Press OK.
screen.
VCR
Pr-12
REC
VCR
Pr-12
REC
ACMS
TIME
DATE
SYS-
ON
OFF
CH
01
ON
OFF
MFT
STATION
00
PR-01
CHANNEL/CABLE
:
MFT
STATION
00
PR-01
CHANNEL/CABLE
AV
:
AV
PSET
R
2.
or 4
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
Press i.
Press 3
to select the programme number
you want to delete. (for example, PR 03)
or 4
02
C03
00
PR-02
03
C05
00
PR-03
04
C06
00
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
,
3.
01
C02
00
02
C03
00
PR-01
PR-02
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
03
Press 1.
After a short while, the selected station will be
deleted.
PR-06
P
SET
R
to select the programme number
you want to move to (for example, PR 05).
or 4
01
C02
00
PR-01
02
C03
00
PR-02
03
C05
C06
00
PR-04
00
PR-05
04
CH
01
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
OPR
PR
PSET
R
3.
Dr.
OPR
PR
Press i.
Press 3
TEM
NIC
fOSD
2.
SYS-
NIC
fOSD
Dr.
TEM
TIME
DATE
ACMS
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C02
00
PR-01
02
C03
00
PR-02
04
05
06
C06
00
PR-04
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
DELETE
PSET
R
4.
:
:
,
Press i to remove the menus from the TV screen.
If you wish to delete other TV stations repeat
stages
05
01
1
-
3.
01
C02
00
PR-01
02
C03
00
PR-02
04
05
C04
00
PR-04
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
PSET
R
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
08
MOVE:
PSET
R
DELETE
:
,
-
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
P
R SET
16
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations:
Stored TV stations can be selected in either of two
ways.
Press PROG. 3 or 4 to select different stations that
are tuned into your VCR.
You may also directly select stations using the
numbered buttons on the remote control.
Before
Operation-DVD part
On-Screen
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
You
display
can
the
Press DISPLAY
1.
Press b / B to
inputting
highlighted.
the title
For
number).
some
functions,
no
Number
provide
button is
on-screen
Playback
TITLE
A-B
1/9
B, Numbers
1/12
b /
B, Numbers
ENTER
0:20:09
Numbers, ENTER
Audio
language
and Digital Audio
Output mode
Subtitle language
Some discs may not
shown below.
If
b /
b/Bor
AUDIO
InstaliodSeup
setting.
Notes:
?
1/3
Time search
change
press ENTER to execute the
?
Title Number
Chapter
the setting. You can also
the number buttons if appropriate (e.g.
use
Selection Method
during playback.
The selected item is
3.
Items
ENTER
Press v / V to select an item.
2.
Example: On-Screen Display during
playing DVD Video
all of the features
for 10 seconds, the
pressed
display disappears.
ABC
b/Bor
1 ENG
SUBTITLE
Angle
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Enter
Marker
a
Items
Selection Method
Track Number
MARKER SEARCH
123456789
Marker Search
menu
1/3
Action
play
from this
prohibited
or
ENTER
0:20:09
point
not available
B, Numbers
(or PBC mode)
Time search
Resume
b /
Numbers
ENTER
b/Bor
Audio Channel
STEREO
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle language
Sound
1
MP3
ABC
ENG
3D SUR
Numbers, ENTER
b/Bor
AUDIO
b/Bor
SUBTITLE
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 22.
To
Press SETUP to
display
the
menu.
SETUP will take you back to initial
To go back to the
previous
move
alternate
Setup
menu
appears.
option then press
to the second level. The screen shows
setting for
setting(s).
the selected item,
Use v / V to select the second desired
press B to
18
Original
move
as
well
option
as
then
to the third level.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
additional steps.
Press SETUP
or
Move
Menu
Language
Select
a
language
for the
Setup
Disc Audio / Subtitle / Menu
Operation
the current
5.
Disc Menu
Select
menu
and
on-screen
DVD
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Use v / V to select the desired
require
Off
Select the
2.
4.
Disc Subtitle
display.
the remote control.
on
Press SETUP. The
3.
Original
screen.
level:
1.
B to
Disc Audio
A second press of
To go to the next level:
Press B on the remote control.
General
English
Language
and exit the Menu:
display
Press b
Menu
PLAY to exit the
Setup
menu.
Original:
Refers to the
disc
recorded.
was
original language
Other: To select another
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b button
DISPLAY
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
:
to
9Wide
Enter.
highlight
Widescreen
Scan
5.
Off
Pressing
scan
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Select when
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "NO DISC" is displayed on the display window.
standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
2)
Press STOP and hold it for five seconds before
Display
Display
DVD
Mode
visible
Mode
setting
InstaliodSeup
output will be restored to the
standard setting and a picture will once again be
releasing
works
only
when the TV
Aspect
it. The video
on a
conventional
analog
TV
or
monitor.
mode is set to "4:3".
LetterBox:
upper and
Displays a wide picture with
lower portions of the screen.
bands
Panscan:
entire
on
the
Automatically displays the wide picture on
screen and cuts off the portions that do not fit.
Progressive
the
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
progressive
scan:
Connect component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
Scan
On
Off
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
Set this unit
variety of audio output options.
AUDIO options according to the type of
audio system you
a
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Dolby Digital
Select
DVD
/ DTS / MPEG
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital, DTS
a
or
MPEG decoder.
MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM
PCM
(for Dolby Digital
/
audio.
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
Sample Freq. (Frequency)
is
DVD
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is made, this unit
signals to 48 kHz
automatically
so
converts any 96 kHz
your system
decode them.
can
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
its capabilities.
Dynamic Range
Control
(DRC)
amplifier
DVD
without
to
verify
DivX
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic presen-
tation
possible,
thanks to
digital
audio
technology.
the dynamic
However, you may wish to compress
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
20
a
on
the disc mix into
OTHERS
DivX(R)
The PBC, Auto
Play
and
DivX(R) VOD settings
can
be
changed.
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
You
can
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
Your
DivX(R)
Video On Demand
VOD
Select
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Move
Select
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
The
PBC
Set
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
are
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
Play
Notes:
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
DVD
can
If Auto
back the title
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
watch the file.
use one
of your 3 views now?
automatically.
On: Auto
of
VOD Rental
DivX(R)
Do you want to
Play
play
can
options
This rental has 3 views left.
mode is set to On, this DVD player will
search for title that has the longest playback time and
then
the number which you
View
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
You
InstaliodSeup
encrypt movie file.
to On or Off.
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Country
enter or
can
2. Follow
step
"New" is
Input
Move
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, there
parental
forget
your
Security Code
1.
Press SETUP to
2.
Input
the
6-digit
display
3.
Enter
a new
code
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
as
security
described above.
Code
DVD
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
2. To access the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
1-8:
tions and
Rating one (1)
rating eight (8) is
the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
"Country Code"
on
the LOCK
menu
the
then
2.
Follow step 2
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
has the most restric-
Select
on
press B.
5.
available
using
menu.
were
press B.
scenes
Setup
clear it
by
Country
If you set
the same
the
can
number "210499" and the
your children from being able to view
material you believe is unsuitable.
Rating
then press ENTER.
code is cleared.
preventing
22
new
If you forget your security code you
the following steps:
alternative.
3. Select
or
Select
DVD
for children to view.
access
4-digit code,
again to verify.
it
(Rating). "Change"
4. Press SETUP to exit the menu.
Some movies contain
The
2 as shown left
highlighted.
3. Enter the
Rating
change password.
1. Select Password on the LOCK menu then press B.
SA
Code
(Security Code)
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your country code
selection.
Operation
Playing
a
5.
tape
You will only be able to load and eject video cassettes when your VCR is plugged into the mains.
Your VCR may also playback recordings from
NTSC tapes (on PAL TV).
Getting
a
better
picture
slow motion and shuttle, the noise bars
may appear on the picture according to the status
of tape.
During
If distortions
-
Make
VCR
that you have correctly connected your
described earlier in this book.
your TV.
Press POWER to turn
Turn
on
your VCR.
Insert the video cassette into your VCR.
on
The video cassette should have the window side
facing
2.
up and the
arrow
Press PLAY to start
facing
away from you.
playing
your tape.
video cassette which has had its
3.
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
picture.
repeatedly to advance
the
be
playback
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
can
-.
playback.
tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
If the end of the
Operation
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
6 Press 180 seconds
(Optimum
Picture
Response)
This feature
tape frame by frame.
If you press FORWARD, the picture will be slowed
Tapes
reduce
Press EJECT.
OPR
a
down at about 1/19 times the normal
Press STOP to end
picture,
2 Press 60 seconds
AUTO TRACKING
Your VCR will
+ or
in the
seen
1 Press 30 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
give
6.
be
can
them with TRK
sure
as
G.
To switch off the slow motion and shuttle, press
the desired function.
When a cassette is inserted and playback started,
the automatic tracking function works to get the
best possible picture automatically. If the quality of
the recording is poor, repeatedly press TRK + or
on the remote control to manually adjust the
tracking until any distortions have been removed.
Press numbered 0 on the remote control to switch
automatic tracking back on again.
1.
playback, Shuttle :
During playing back or still picture press F or
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play,
2xplay, 7xplay)
Slow motion
paused
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape.
1.
Press i.
2.
Press 1
3.
Press OK.
or
2 to select OPR.
.
Still
picture quality can
pressing TRK + or
be
improved slightly by
-.
4.
Press PLAY to continue
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
the tape.
Logic search:
During fast forwarding
OFF
SOFT
SHARP
f
ON
OFF
4.
Press 3
SHARP.
or 4
MS
TIME
DATE
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
playing
5.
a
SYSTEM
Dr.
C
OPR
i
OPR
repeatedly
Please note you may
or
VCR
12
12
to select:
only
OFF, SOFT
or
set OPR when
tape.
Press i return to
screen.
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
produce improved picture and
quality, however LP will provide twice
recording time as SP.
Instant Timer
video cassette
Your VCR
runs
Press REC/ITR to start
which
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
Make
VCR
when
quality
slight
using LP.
a
7.
2.
Insert
a
Press PAUSE/STEP to avoid
on
your VCR.
video cassette with
tab into
3.
4.
up and the
arrow
facing
away from you.
Press PR + or to select the programme
number you wish to record.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
EJECT will appear
seconds.
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
repeatedly
press AV until the socket you wish to record from
is displayed.
L/R
on
(VCR
the
IN
rear
AV1)/
of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
the TV
(L(MONO)/R)/
the front of your unit.
screen
for
a
few
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
It is
recording from AUDIO
VIDEO (VCR IN AV1) terminals
on
Notes:
control.
AV 1 for
recording.
Press EJECT.
cassette.
VIDEO IN terminals
be
Press STOP to end
You may also directly select programme number
using the numbered buttons on the remote
(L(MONO)/R)/
24
can
If you do not wish to record
-
unwanted
If you press PAUSE/STEP
unit will
enter the record pause mode and ITR is cancelled.
8.
protection
recording
recording.
during ITR, this
loss in
your VCR.
The video cassette should have the window side
facing
recording.
Press PAUSE/STEP to continue
that you have correctly connected your
described earlier in this book.
Press POWER to turn
much
as
scenes.
sure
as
sound
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Tapes
1.
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
incorporates Long Play (LP)
and sound
6.
out.
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
picture
Long Play
SP will
a
Recording (ITR) start recording
immediately for a set period of time or until the
Press LP if you wish to record in
Standard Play.
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
Timer
recording using
Display
You may also select the the start and end times
On Screen
pressing
3 or 4.
PR
PR-01
You may set up to seven timer record events
within one month of the current date.
Note:
Before setting the timer make sure that you have
set the VCR clock correctly and you know which
stations you have tuned TV stations on your VCR.
1.
2.
3.
7.
Insert a video cassette with protection tab into
your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
DATE
16
TIME
190020
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
Press 2 to select the recording speed.
Press 3 or 4 to select the desired tape
(SP, IP,
by
or
speed
LP).
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
complete recording the program.
Press i.
Press 1 or 2 to select REC.
Press OK.
PR
PR-01
Press OK to start setting the timer record event.
If all timer record events are full press 3 or 4 to
select the event that you wish to remove and
DATE
TIME
16
1900
::
2000
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
replace.
Press 1 to delete the event.
PR
4.
DATE
8.
Check that the timer event details are correct.
Press i twice.
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
9.
Press STOP to end
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
-~
-~
-~
-~
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
::
--
SP
--
-~
SP
--
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
9, press 0 first, then
the channel number; for example Stations 3 03.
You may also select Channels by pressing 3 or
4. Once selected press 2.
If you wish to record from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/
VIDEO IN from the back or on the front of your unit,
press AV to select for correct display (AV1 or AV2).
recording.
-
-
PR
5.
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press OK before entering the date you may
select one of the following automated recording
features. Press 1 or 2 to select, then press OK to
confirm.
DLY To record every day (except Saturday and
Sunday) at the same time.
SU~SATo record at the same time every week.
PR
DATE
PR-01
Notes:
If at
later date you wish to delete or change any of the
settings in timer event memory you may do so without
having to enter all the timer event information again.
Simply display the timer event screen. Press 3 or 4 to
select the event that you wish to delete or change.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3
or 4 to enter the correct information.
a
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme
will always be given priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
SUMOTUWETHFRSA
6.
Press the numbered buttons to enter the recording
start and end times of the programme that you wish to
record.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
25
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
the TV and select the video
on
connected to the DVD
Turn
input
source
player.
the audio system (if applicable) and select
the input source connected to the DVD player.
2.
side down.
playback
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
4.
press PLAY.
In
available
some cases,
the disc
menu
might
Press TITLE
or
DISC MENU to return to the
menu
screen.
When
disc has
a
and
settings
stopped
You
(See
page
operating
title
21).
?
To watch
a
region
code for this
player
is 2
another
?
on a
more
than
Press SKIP .
than
more
track, you
one
chapter/track
one
chapter
can move
or a
to
follows:
as
>
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
or
Press SKIP . twice
To go
directly
briefly
to
step back
to the
to any
chapter during
DVD
playback,
numberoruseb/B.
Search
1.
Press m
or M
during playback.
2.
Press m
or M
repeatedly
to select the
required
speed.
DVD
during
timer
to
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
recording standby
3.
or
X100
To exit SEARCH mode, press PLAY.
Changing
the Audio Channel
Press AUDIO
different
26
disc has
previous chapter/track.
mode, press POWER and DVD to switch to DVD
mode.
a
disc has
?
DVDs may have a region code. Your player does
not play discs that have a region code different from
The
its number while
can
When
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 22.)
player.
(two).
then the
to another CHAPTER/TRACK
If
your
to
can move
playback is
appropriate number (0-9) or use
Moving
Notes:
?
title, you
one
play any title by inputting
playback is stopped.
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
on
than
b / B to move to another title.
procedures
"PBC"
more
another title. Press DISPLAY while
Use the number buttons to select the track you
want to view and press RETURN to return to the
Menu
menu.
to another TITLE
?
menu screen.
Setup
use
appear
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
?
the
Moving
instead:
Off
on
on
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
Unless stated otherwise, all operations described
the remote control. Some features may also be
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
Press
DVD Video Discs
To exit still motion mode, press PLAY.
?
Slow Motion
?
Press PAUSE/STEP
The DVD
player
will
?
go into PAUSE mode.
?
?
2.
Use m
M to select the
or
1/16, t 1/8, t 1/4,
1/16, T 1/8, T 1/4,
or
t
or
T
required speed:
1/2 (backward), or
1/2 (forward).
t
T
Video CD, the Slow speed changes: T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
With
a
To exit Slow Motion mode, press PLAY.
-
Title: repeats the current title.
Off : does not play repeatedly.
Track
All
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
Off
-
:
does not
:
play repeatedly.
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
?
3.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
(X) during playback.
now
a
repeat mode.
?
1.
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
If you press SKIP
during Repeat Chapter
(Track) playback, the repeat playback cancels.
(>)
once
Note:
Slow motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
3D Surround
To
produce
3D surround effect that simulates
a
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for multi-channel audio from a home theater system).
Random
1.
Press RANDOM
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
2.
Press RANDOM
again
the TV
on
screen.
Use 3
to normal.
during random playback, the unit
selects another title (track) and resumes random playback.
>
Note:
setup
2.
3.
By pressing SKIP
a
Press DISPLAY
menu
PBC, You
must set PBC to Off on the
to use the random function
(See "PBC"
on
1.
page
1.
2.
3.
a
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
Press DISPLAY
during playback. The
elapsed playing time.
"
A
*
end
Press v / V to select the time clock icon and
"-:--:--" appears.
3.
Input
the
required
start time in
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
"
point.
time search
2.
screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
at any chosen time on the disc:
seconds from left to
Press A-B
Press A-B
playing
box shows the
A-B
To repeat
will be
Time Search
21).
Repeat
option
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
To start
Video CD with
during playback.
to select the sound
or 4
The sound
Tip:
On
1.
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
27
Zoom
Special
DVD Features
Use
Checking
the contents of DVD discs: Menus
to
zoom
Press ZOOM
1.
the video
enlarge
image.
during playback
or
still
playback
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
MENU.
→
1600% size
→ screen
fit mode
→
100% size
the
can
when
screen
image appears on
you're playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
3.
Use the bBvVbuttons to
zoomed
4.
To
through
normal
playback,
?
Press TITLE. If the current title has
appears
menu
may appear.
The
menu
on
the
menu
press ZOOM repeat-
3.
a menu,
the
Otherwise, the disc
screen.
offers features such
spoken language and
chapters for the title.
the
subtitle
angles,
as camera
options,
and
Press TITLE to exit.
press CLEAR button.
or
Disc Menu
Notes:
?
2.
picture.
resume
edly
move
ENTER.
1.
the way the
change
corresponding number or use the b
to highlight your selection. Then press
Title Menu
Screen fit mode:
You
the
B v V buttons
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
2.
Input
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
Press DISC MENU and the disc
Press DISC MENU
again
menu
is
displayed.
to exit.
disc, VR disc and movie file.
Camera
Marker Search
Angle
If the disc contains
To enter
You
Marker
a
start
can
from up to nine memorized
marker, press MARKER at the
desired
point
the TV
screen
a
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
playback
To enter
points.
recorded at different
scenes
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
on
markers.
To Recall
1.
or
Clear
During
disc
search
menu
a
Changing
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
2.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
3.
Press ENTER and
marked
scene.
playback
a
marker
starts from the
You
on
any marker by
the marker search menu.
can
play
Language
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear a
With DVD-RW discs recorded in VR mode that have
both
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
a
main and
a
Or, press CLEAR and the marker
Subtitles
number is erased from the list.
4.
the Audio
inputting
its number
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to see
Note:
?
The subtitle file of the DivX file is
displayed only
smi, srt and sub.
?
If there is
no
information
not read in the DivX
28
file,
or
"
1
there is
"
or
a
code that
etc. are
can
displayed.
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
?
?
AUDIO CD
1/12
0:52:07
List
Program
creates an ISO 9660 file
Track1
Track2
Track3
?
Track4
File
names
and must
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
They
should have
a
maximum of 8 letters
.mp3 or .wma extension.
contain special letters such as /
incorporate
should not
system.
an
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
Operation
less than 650.
MP3 / WMA
1.
Press v / V to select
folder, and press ENTER
a
to see the folder contents.
2.
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
1/12
0:00:00
This DVD
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
PROGRAM
Info
Edit
should
Tip:
?
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
always
be
sought
from the
copyright
owner.
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
highlight
and
press ENTER.
?
?
?
Press DISC MENU to
On
to the next page.
move
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
When
a
playing
titles, you
top of the
menu
is
highlighted.
file
can see
containing information such as track
the information by pressing DISPLAY.
29
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
Press PAUSE/STEP
1.
press
Moving
playback, press PLAY,
PAUSE/STEP again.
ENTER
or
(.
previous
3.
In
>) briefly during playback
track or to return to the beginning
to go back to the
track.
of audio CD, to go directly to any track,
enter the track number using the numbered
Repeat
You
1.
briefly
By pressing SKIP
during random playback, the unit
selects another track and resumes random playback.
Repeat
1.
case
buttons
can
(0-9).
a
track/all
on a
Press REPEAT when
disc.
playing
a
?
?
?
a
does not
If you press SKIP (>) once
the repeat playback cancels.
Press A-B
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
menu screen.
3D Surround
To
play repeatedly.
during Repeat Track playback,
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
1.
Press AUDIO
during playback.
"3D SUR." appears
Search
30
menu screen.
3.
2.
1.
Press m
or M
during playback.
2.
Press m
or M
repeatedly
to select the
X8 backward
or
forward.
To exit SEARCH mode, press PLAY.
until
menu screen.
required
on
the
menu screen.
playback, press AUDIO
"3D SUR." disappears from
To return to normal
repeatedly
speed: X2, X4,
the
desired repeat mode.
Track: repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
on
again at your chosen end point.
The Repeat icon and "A-B" appear on the menu
screen, and the sequence begins to play
repeatedly.
disc. The repeat
Note:
3.
To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
the
Press REPEAT to select
A-B
2.
icon appears.
2.
>
and "A" appear
Track/All/Off
play
until
Tip:
or
Press SKIP . twice
playback, press RANDOM
RANDOM disappears from the
To return to normal
menu screen.
to go to the next
of the current track.
2.
2.
repeatedly
to another Track
Press SKIP
1.
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
during playback.
To return to
2.
Press RANDOM
the
Repeat Programmed
Programmed Playback
1.
1.
Insert
2.
contain 30 tracks.
can
?
?
Audio CD
2.
MUSIC
or
menu
the
on
right
of the word
right
side of the
Press PROGRAM
again, then
the Program
the
mark will
E
MUSIC
0:00:00
1/12
List
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
2-Music2
Track5
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Clear All
7-Music7
DISPLAY
Audio CD Menu
The program
PROGRAM to exit the
playback
List
Program
2.
Press B to
3.
Use v/V to select the track that you wish to
from the "Program" list.
4.
Press CLEAR.
:
move
to the
"Program"
list.
Repeat
Operation
erase
to erase additional tracks
the list.
the
Complete Program
List
1.
Follow steps 1-2 of
List" as above.
2.
Use 3/4 to select "Clear All", then press ENTER.
is
"Erasing
a
Track from
Program
appears. Press
menu
menu.
Note:
Video CD with PBC, you must set PBC to Off
the setup menu to use the programmed playback
a
on
complete Program for the disc
will be erased.
Note:
The programs
removed.
21).
page
Track from
Press PROGRAM in the stop mode to
enter Program Edit mode.
The
on
a
Video CD
Erasing
MP3/WMA Menu
stopped.
during Repeat Track playback,
PROGRAM Edit
Info
Video CD: Press PROGRAM while
(See "PBC"
play repeatedly.
1.
on
PROGRAM Edit
On
does not
1/12
List
E
Program
Track8
desired repeat mode.
menu screen.
Edit mode.
AUDIO CD
0:52:07
Off(No display):
If you press SKIP (>) once
the repeat playback cancels.
Note:
to exit
a
Track: repeats the current track
All: repeats all the tracks on programmed list.
Erasing
disappear
disc. The repeat
Note:
appears.
Press PROGRAM.
The E mark will appear to the
"Program"
a
MP3/WMA Discs:
or
AUDIO CD
playing
Press REPEAT to select
?
disc.
a
Press REPEAT when
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program
Tracks
are
also cleared when the disc is
VIDEO CD
List
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
E
Track5
Clear All
Video CD Menu
3.
Select
the "List", then press ENTER to
the selected track on the "Program" list.
a
place
Repeat
4.
track
to
on
place
additional tracks
Press PLAY
or
playing
list have
To
normal
playback,
the
Playback begins
programmed the tracks.
"Program"
resume
on
ENTER to start.
the order in which you
Playback stops after all of the tracks
6.
the list.
Press B.
Select the track you want to start
"Program" list.
5.
on
select
a
played
the
once.
playback
track of
on
in
from
programmed
CD (or MP3/WMA) list
and then press PLAY.
31
Viewing
Using
JPEG Disc
a
this DVD
Player
you
can
Moving
view discs with JPEG
files.
1.
disc and close the tray. The PHOTO
appears on the TV screen.
Insert
a
menu
Preview
List
Press SKIP
(. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
JPEG
Zoom
PHOTO
JPEG Folder 1
JPEG
to another File
Use
zoom
(see
28
to
enlarge
page)
the
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press v / V
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
a
counter clockwise.
To listen to MP3/WMA music
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Press DISC MENU to
Slide Show
move
PLAY.
There
are
highlight
the
(Slide Show)
Speed options
(Slow).
4.
Use B / V to select
1.
top of the
STOP is
then
2.
player
will
now
photo
file.
pressed.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
: >>>
(Fast),
>>
limited
menu
is
highlighted.
as
is
follows:
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an
display
---
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
player
Depending
2048
during
with this
compatibility
after several minutes, some of
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
or
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
press
?
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
?
?
copying
into the
".jpg"
CD layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
32
a
menu.
To listen to
JPEG
Press PAUSE/STEP
The
the two types of file in
icon then press ENTER.
starts. The playback will continue until
Playback
Press RETURN, information of file is hidden.
Still Picture
disc.
display PHOTO
Press v / V to select
on-screen
?
to MP3/WMA
player.
3.
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
on
same
containing
Press TITLE to
a
PHOTO word
the
2.
?
On
on
listening
Tip:
three Slide
>
files while
Insert the disc
JPEG disc
(Normal) and
?
display
music files recorded
to the next page.
Tip:
?
can
to move
JPEG
Use vVbBto
press ENTER.
You
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
When
shipping
save
Keeping
?
?
Press v / V to select a track then press PLAY
ENTER and playback starts.
Press TITLE to
move
or
to the list menu.
Do not
the
use
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
Do not leave rubber
or
with the unit for
a
leave marks
the surface.
Cleaning
on
Operation
the unit
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
the unit
the exterior surfaces clean
spray
?
service technician.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
a
DVD-VR
3.
before
the Unit
Handling
Please
disc and close the tray. The DVD-VR
appears on the TV screen.
Insert
menu
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
Some DVD-VR disc
are
made with CPRM data
by
DVD
RECORDER. Player does not support these kinds of
discs.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
only
copy protection system (with scramble system)
allowing the recording of 'copy once' broadcast
a
programs. CPRM stands for Content Protection for
Recordable Media.
This
player is CPRM compatible, which
means
that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
can
only be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
use.
For details, please contact your nearest authorized
service center.
33
Playing
a
DivX Movie Disc
DivX disc
this DVD
Player
you
can
play
disc and close the tray. The MOVIE
appears on the TV screen.
Insert
player
is limited
DivX disc.
?
1.
with this
follows:
as
Using
compatibility
a
menu
Available resolution size of the DivX file is under
720x576
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
express in the DivX
mark on the
If the number of the
frame is
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
screen
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons on the remote to
?
On
or
PLAY.
is
move
GMC, the unit
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
to the next page.
a
MUSIC, PHOTO and MOVIE word
highlighted.
audio is
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and
If the file is recorded with
*
Press STOP to exit.
Press DISC MENU to
or
outputted.
?
Tip:
?
interleaved, either video
supports only 1-point of the record level.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4.
If the video and audio structure of recorded
file is not
and
highlight
press ENTER.
3.
?
on
top of the
menu
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit
32
34
48kHz
(WMA)
rate: within 8 320kbps (MP3),
192kbps (WMA)
-
-
-
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
programme channel, tape speed and operational mode of your VCR will appear on the TV
screen. If a recording is taking place these On Screen
week,
Displays
will not be recorded onto the
(Self-Diagnosis)
This feature informs you that there is a problem with
your VCR. These error messages will appear on the
TV
screen.
1.
Press i.
Press 1
tape.
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
Press CLK/CNT
display.
repeatedly
to
the
cycle through
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
2.
REC
majority of the On Screen
leaving only the clock or tape
After 3 seconds the
Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left
to remove all
on
the
PSET
R
Pr-12
ACMS
SYSTEM
NIC
fOSD
ON
OFF
TIME
DATE
OPR
screen.
displays
from
VIDEO DOCTOR
HEAD STATUS
screen.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Tape
Counter
Memory Stop
Digital Tape Counter
display window instead of
The
OK
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on
can
be
2.
Press
3 or 4
to check a
problem.
HEAD STATUS
O
PLEASE CLEAN:
Clean your video heads.
the tape.
TAPE STATUS
1.
Press CLK/CNT.
O
Press CLEAR to set the counter to 0:00:00.
Press PLAY
or
The tape counter
in hours, minutes and seconds.
2.
Insert
start
recording.
will display the
Press STOP when
playback
or
actual
play
recording
a
tape with its protection tab in place
NO. OF TIMER PROGRAMME
time
O
is
2Shows
the number of timer
recording.
NEXT TIMER PROGRAMME
complete.
O
Press BACKWARD.
PR-01 26 10:00~11:00SP
Shows the current status of timer
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
Lock
NOT RECORDABLE:
3.
recording.
Press i.
(Child Lock)
The control buttons on the front of the unit can be
switched off so that your unit can only be operated
using the remote control.
1.
Press LOCK.
will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
will flicker in the
display
are
window for
a
pressed
few
seconds.
2.
Press LOCK
will
again to switch off the child
disappear in the display window.
lock.
35
Hi-Fi Stereo Sound
Your VCR will record
and
sound. In addition it has
a
System
playback
Hi-Fi stereo
stereo NICAM
digital stereo
and playback
sound decoder. This allows you to record
the sound in several different ways. Video cassettes
your VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
recorded
on
stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast,
stereo audio
1.
system, video disc
or
another Hi-Fi VCR.
Your VCR's NICAM digital sound decoder allows
you to enjoy broadcasts with NICAM sound, as
well as standard stereo, bilingual and mono sound.
The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
36
2.
Press AUDIO repeatedly until the desired audio
mode appears.
3.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the right
channel when audio output is set to STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
Controlling
Additional Features
Last Scene
This
player
control the sound level, input source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
scene
from the last disc
remains in memory
the disc from the player or switch
that is viewed. The last
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
automatically
You
can
You
can
other TVs with the remote control
control the sound level, input source, and
power switch of non-LG TVs as well. If your TV
is listed in the table below, set the appropriate
manufacturer code.
scene
recalled.
1.
Note:
down TV POWER button, press the
number buttons to select the manufacturer code
While
holding
for your TV
(see
the table
below).
player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
2.
Screen Saver
Code numbers of controllable TVs
This
The
appears when you leave the DVD
mode for about five minutes.
screen saver
player
in
Stop
Video Mode
Setting
With certain discs, the
playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
If
Release TV POWER button.
more
them
than
one
code number is listed, try entering
time until you find the one that works
one
at a
with your TV.
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
video mode.
To
the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
change
The
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
MODE1
al
or
:
Description
The
video
source
Depending
function
on
your TV,
?
on
all buttons may not
after entering the correct
some or
the TV, even
manufacturer code.
?
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
?
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
Note:
If you enter a new code number, the code number
previously entered will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
of each Video Mode
material of the DVD video
(film materi-
material) is determined from disc information.
Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE2
:
Suitable for playing video based content with
comparatively little motion.
MODE3
:
Note:
The video mode
setting only
Progressive Scan
works when the
mode is set to "On"
on
the setup
menu.
37
from DVD To VCR
Copying
Recording
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the COPY button.
Notes:
Be
sure
setup
to set
to "Off" on the
protected,
3.
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
to copy is copy
you may not be able to copy the disc.
are
attempting
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
Insert VHS
will be referred to
blank VHS
Insert
a
Copy
the DVD to VHS
videotape
If the DVD disc
to press the
2.
Insert the recorded tape into VCR A and
tape into VCR B.
3.
Press AV until the socket you wish to record from
is displayed. (VCR B)
Tape
or
appears, you may need
button manually to begin
menu
Play
copying.
Note:
If you press the REC/ITR button, be
DVD mode.
Stop
the
Copy
sure
playing,
replay
and record
over
and
over
again.
recording from AUDIO
(VCR IN AV1) terminals
L/R
VIDEO
on
the
blank
IN
(VCR
4.
To start recording, press the REC/ITR
and PLAY on VCR A.
5.
When you want to finish
on both video recorders.
press STOP to
You must stop the Copy process manually
when the DVD movie ends, or the unit may
AV 1 for
a
rear
AV1)/
of your
unit.
AV 2 for recording from AUDIO IN (L(MONO)/R)/
VIDEO IN terminals on the front of your unit.
this unit in
Process
When the DVD is finished
end the copy.
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR IN AV1)/VIDEO (VCR IN AV1) on the rear
panel of your unit or AUDIO IN (L(MONO)/R) /
VIDEO IN on the front panel of your unit.
into the VCR deck.
panel
as
1.
Tape
The DVD will go into Play mode and the VCR
will go into Record mode.
38
camcorder.
In the
Insert Disc
Press the COPY button on the unit front
press the REC/ITR button.
4.
or a
Note:
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2.
recorder
menu.
If the DVD you
1.
"Progressive Scan"
from another video
copying,
on
VCR B
press the STOP
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech Republic
Denmark
CZ
JP
PH
United States
US
DK
Japan
Kenya
Paraguay
Philippines
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
39
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
properly.
problem
a
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
Plug
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
picture
is poor.
The DVD
not start
player does
playback.
jacks
The power of the equipment connected with the audio cable is turned off.
Turn on the equipment connected
with the audio cable.
The
Set the
is set to the
The disc is dirty.
The TV channels are not tuned in
An
unplayable
properly.
disc is inserted.
placed upside
The disc is not
placed
down.
within the
guide.
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the
down.
playback
Place the disc on the disc tray
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Video tape cannot be
inserted.
Is the cassette compartment
Eject
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
empty?
properly.
properly.
recording
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from
This should mean that additional head cleaning should not
However dirt accumulating on the head after a long period
blurred or broken up. High quality video cassette tapes will
old or damaged tapes might.
40
Connect the audio cable into the
securely.
The disc is
The remote control
does not work properly.
to "Off"
securely.
Digital Audio Output
wrong position.
The
Progressive Scan
(see page 19).
jacks
the batteries with
or
side
cor-
change
new ones.
the tape in.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
Make sure NICAM in the menu is set
to AUTO for the station to be recorded.
your VCR the video head is automatically cleaned.
be necessary.
of time can cause the playback picture to become
not normally deposit dirt onto the video head, but
Specification
General
Power
requirements
AC 110-240V, 50/60 Hz
Power
consumption
19W
Dimensions
Mass
430 X 78.5 X 270
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
Operating humidity
5˚C to 35˚C
Timer
24 hours
RF Modulator
UHF 22
(41˚F
to
95˚F)
5%to90%
display tape
68
-
(Adjustable)
System
Laser
Semiconductor laser,
Video Head system
Double azimuth 4 heads, helical
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
wavelength
650
nm
scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
(ANALOG OUT
More than 100dB
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
Video
1.0
more
than 47 kohms
75 ohms, unbalanced
Vp-p,
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Progressive Scan)
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Audio output
(digital audio)
0.5V(p-p),75Ω,RCAjackx1
Audio output
(optical audio)
3 V
Audio output
(analog audio)
2.0 Vrms
(p-p),
75
Ω, Optical
(1 KHz,
0
dB),
connector
600
x
4-pin
x
x
1
1
1
Ω, RCA jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than 1 kohms
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
subject
to
change
75 ohms, unbalanced
without notice.
Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol
are
trademarks of
Dolby
Laboratories.
"DTS" and "DTS Digital Out"
are
trademarks of
Digital Theater Systems,
Inc.
41
SAFETY PRECAUTION
JEDDAH MAIN SERVICE CENTER
THIS EQUIPMENT MUST BE DISCONNECTED FROM
P.O.BOX 704, JEDDAH 21421 KINGDOM OF SAUDI
ARABIA
THE MAINS POWER SUPPLY WHEN IT IS NOT IN
TEL)
02-629-2929
USE. DO NOT ALLOW THIS UNIT TO BE EXPOSED TO
Toll Free 800-244-2929
RAIN OR MOISTURE.
RIYADH BRANCH SERVICE CENTER
TEL)
CAUTION
01-461-5559 EXT.
119,145
AL KHOBAR BRANCH SERVICE CENTER
TO PREVENT ELECTRIC SHOCK, DO NOT
TEL)
03-858-0929
liquid
into
REMOVE THE COVER. NO USER SERVICEABLE
PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
If you pour a cold
air will condense
WARNING
THE RECORDING AND PLAYBACK OF CERTAIN
cause
PERMISSION.
The
working
delivery
to consumer.
Upon
the
expiry
od, it might be unsuitable for the
use
of the said
according
peri-
to their
designation.
Please read these
precautions
before you operate this
unit.
?
?
Avoid extreme heat, cold, moisture and dust.
Avoid using near a magnetic field. (This will
adversely
?
affect the units
Be careful when the surface of the
with
a
case
is
wiped
benzene, alcohol, thinchemically processed cloth, the sur-
volatile agent such
ner, etc. or a
?
performance.)
as
face finish may deteriorate or its coating may peel.
Use the unit only in a horizontal position, and do
place anything heavy on it.
Keep the unit away from flower vases, tubs, sinks,
etc. If any liquids should spill into unit, serious damage could occur. In that case, please consult qualified service personnel.
Do not obstruct the ventilation holes: they prevent
overheating. Even soft materials such as paper and
not
?
?
?
cloth may prevent proper ventilation of the unit.
There are no serviceable parts inside. For serv-
ice, please
contact your service centre.
the surface of the
glass.
This is
on
the
of the most crucial parts of the unit, will
to the tape.
one
damage
When this set is
life of this set is 7 years since the date of
water vapor in the
moisture condensation. Moisture condensation
head drum,
MATERIAL MAY NOT BE DONE WITHOUT
on
glass,
a
exposed
to a
rapid temperature change
from cold to warm, some condensation will occur. Under
this condition, connect the power cord to the AC line,
press POWER button
for the unit to dry out.
on
and allow at least two hours
P/NO
:
3834RV0021V
Printed in Indonesia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement