LG | LT-20A20 | LG LT-20A20 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Back panel
4
Basic
7
operation
Programme selection
Volume adjustment / Quick view / Mute function
Auto Demonstration / On screen language selection
On and off /
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
9
Setting up
Fine
tuning
Programme edit
Calling the programme
table
Picture adjustment
Picture adjustment
14
Sound
15
adjustment
adjustment
Stereo/Dual reception
Sound
Sound
/ NICAM
reception
output selection
Other functions
TV and AV modes / Child lock / Auto
Blue back (option) / Sleep timer
Teletext (option)
Switch on/off
SIMPLE text
TOP text (option)
FASTEXT
Special teletext functions
19
Connection of external equipment
Aerial socket
Component in sockets
Audio/Video in sockets
Monitor out sockets
S-Video/Audio in sockets (SAV)
Headphone socket
Speaker out sockets
12V DC out socket
22
Troubleshooting
2
17
sleep
check list
Back
cover
Installation
Power
This set operates on a DC supply provided by the AC-DC adaptor,
the voltage is as indicated on the label on the back cover. Use only
the AC-DC
adaptor supplied
with the set and
never
apply
an
AC
SE
SPEAKER
(L,
OPENCLOSE
SPEAKER
(R,
)
mains to the set directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
PNCLSE
b
SPEKER
L,
adaptor.
a.
Connect the DC
the set.
plug
of the AC-DC
adaptor
to the 15V socket of
a
c
OPENCLOSE
SPEAKER
(R,)
b. Connect the AC-DC
adaptor and it's power cord.
Connect the power cord to an AC mains.
In the event of thunderstorms or powercuts, please
c.
mains
plug
anything to
of the AC-DC
adaptor
and the aerial
plug.
pull
out the
Do not allow
rest upon or roll over the power cord, and do not
the monitor where the power cord is subject to damage.
place
Warning
To
prevent fire
or
shock
moisture. Do not rub
hard
as
this may
or
hazard, do not expose the set to rain or
strike the Active Matrix LCD with anything
scratch, mark,
or
damage
the Active Matrix LCD
permanently.
T/VMNUOKOLOLPRPR
ONOF
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
VAVMNU OK
OL
OL
PR
PR
ONOFF
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
or
heat. Also
ensure
that the
position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This set can be positioned by using the table top stand, pedestal
stand (optional parts) or wall mounting bracket (optional parts).
When you install the set using a wall mounting bracket, fix it carefully so that the TV is secure. Mount the speakers provided on the
TV cabinet as picture right.
placed
a
CLOSE
OPENCLS
SPEAKER
(L,
)
OPENCLS
OPEN
SPEAKER
(L, )
Cleaning
the set before cleaning the face of the LCD Screen. Dust
by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
Unplug
the set
OPENCLS
SPEAKER
(L, )
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
POWER
MUTE
1
1
2
3
Before you use the remote control
teries. See the next page.
1.
POWER
switches the set
2
4
5
6
7
8
9
2.
MENU
on
from
standby
or
off to
standby
or
directly
standby.
NUMBER BUTTONS
switches the set
on
from
select
a
number.
TV/AV
0
3
3.
MENU
selects
4.
VOL
a menu.
SLEEP
PR
4
handset, please install the bat-
VOL
OK
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set
Q.VIEW
on from standby.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Φ
LIST
PR
5
TEXT
MIX
Γ
OK
INDEX
i
TIME
/
accepts your selection
REVEAL MODE
or
displays
the current mode.
M
SIZE
HOLD
UPDATE
5.
Q.VIEW
returns to the
I/II
PSM
previously
viewed programme.
6
6.
I/II
selects the
7
language during dual language
output (option).
selects the sound
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV
selects
TV, DVD
clears the
menu
switches the set
AV mode.
or
from the
on
from
screen.
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
Note
:
are
details,
In teletext
(option)
used for teletext.
see
1
2
3
4
5
6
7
8
TV/AV
0
the 'Teletext' section.
mode, the SLEEP, LIST and Q.VIEW buttons
9
10
are
SLEEP
PR
used for teletext function.
VOL
Battery
9
MENU
Q.VIEW
installation
VOL
OK
LIST
PR
11
The remote control handset is
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
TEXT
MIX
INDEX
i
TIME
M
-
SIZE
HOLD
I/II
Note
:
To avoid
damage
from
batteries if you do not plan to
extended
period
possible battery leakage,
use
remove
12
REVEAL MODE
UPDATE
PSM
the
the remote control handset for
an
of time.
5
Location and function of controls
Front
9
panel
7
10
8
ON/OFF
TV/AV
H/P
S-VIDEO
VIDEO (MONO)
L
AUDIO
MENU
OK
VOL
VOL
PR
PR
R
AV
23
Back
4
5
6
1
panel
1.
2.
MAIN POWER (ON/OFF)
switches the set on (I) or off
(O).
TV/AV
selects TV, DVD or AV mode.
clears the menu from the screen.
switches the set
3.
4.
MENU
selects
on
from
standby.
a menu.
OK
accepts your selection
Φ
or
the current mode.
displays
Γ
5.
/
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
6.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
7.
POWER/STANDBY INDICATOR
illuminates
brightly
when the set is in
dims when the set is switched
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
Connect the
headphone plug
10. AUDIO/VIDEO IN SOCKETS
standby
mode.
on.
to this socket.
(AV)
Connect the audio/video out sockets of external
equipment
to
these sockets.
S-VIDEO/AUDIO IN SOCKETS
(SAV)
Connect the video out socket of
VIDEO socket.
an
S-VIDEO VCR to the S-
Connects the audio out sockets of the S-VIDEO VCR to the
audio sockets
6
as
in AV.
Basic
operation
On and off
1.
2.
Press the main power button (I) to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
3.
Press the POWER button
4.
The set reverts to standby mode.
Press the main power button (O) to switch the set off.
on
the remote control handset.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the
/
Δ
Ε
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
buttons.
Volume
adjustment
Press the
Φ
/
Γ
button to
MENU
9
TV/AV
0
adjust
the volume.
PR
Quick view
VOL
Press the Q.VIEW button to view the last programme you
OK
VOL
were
watching.
Q.VIEW
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
Φ
/
Γ, I/II button.
Auto Demonstration
I/II
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
On
screen
language
selection
The menu can be displayed
First select your language.
on
the
screen
in desired
1.
Press the MENU button to select the Station
2.
3.
Press the Δ / Ε button to select
Press the OK button.
4.
Press the
5.
6.
language.
menu.
Language.
Δ / Ε button to select your desired language.
Press the OK button.
All the on screen displays will appear in the selected language.
Press the TV/AV button to return to normal TV viewing.
7
On
screen menus
The
an
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
also
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In some models, the Normal/Turbo search will not display,
the Start will display in the Auto programme menu.
d.
In some models, the Blue back will not display in the Special
1.
2.
Repeatedly
menu.
MENU
BG
1
System
StorageOfrom
AutoOprogramme
ManualOprogramme
NormalOsearch
TurboOsearch
ProgrammeOedit
Language
PR
()OOKOMENUOTV
VOL
OK
AVO
()O}{OMENUOTV
AVO
VOL
Station
menu
PR
Contrast
100
95
85
80
0
Brightness
Colour
Sharpness
Tint
()O}{OOKOMENUOTV
AVO
Picture
System
Channel
V
BG
UHFO1
Fine
{{{
Search
Name
Storage
CO01
1
()O}{OOKOMENUOTV
AVO
menu
0OOOOCR01OOOOOO5OOSR 07
1OOCD05
OOOO6OOSR 07
OEqualizer
OBalance
OAVL
0
Off
O
2OOOOCR07OOOOOO7OOCR 12
3OOOOSR02OOOOOO8OOCR 15
4OOOOCR06OOOOOO9OOSR 05
OODeleteO O Copy
OOMoveO OOOOSkip
()OOKOMENUOTV
AVO
()O}{OOKOMENUOTV
Sound
menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
AVO
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENUOTV
AVO
Special
TV programme
8
()OMENUOTV
menu
AVO
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
()OOKOMENUOTV
AV
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
BG
1
System
StorageOfrom
NormalOsearch
TurboOsearch
1
2
3
4
5
6
7
8
MENU
()O}{OOMENUOTV
4.
5.
6.
7.
In
some
models, you
can
9
TV/AV
0
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
8.
AV
only
PR
VOL
OK
VOL
PR
select Start.
Note :
a.
Turbo search is further faster than Normal search and
in some models, these searches will automatically store all
receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
Press the OK button to begin auto programming.
System
StorageOfrom
NormalOsearch
TurboOsearch
1
BG
1
CO15
2%
MENUO
(Normal search)
System
StorageOfrom
BG
1
NormalOsearch
TurboOsearch
CO38
1
2%
MENU
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
9
TV stations
Setting up
Station
Menu
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
with five characters to each programme number.
AVO
1.
Repeatedly
2.
Press the
3.
Δ
press the MENU button to select the Station menu.
/ Ε button to select Manual programme.
Press the OK button to
display
the Manual programme
menu.
1
2
3
4
5
6
7
8
9
MENU
System
Channel
VOL
Storage
CO01
1
()O}{OOKOMENUOTV
AVO
4.
Press the Δ / Ε button to select System. Select
with the Φ / Γ button;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines)
5.
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
PR
OK
BG
UHFO1
{{{
Search
Name
0
VOL
V
Fine
PR
number buttons.
6.
Any
a
TV
number under 10 is entered with
system
a numer-
ic '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the
Storage.
the
Φ
/
Γ
one required, press the Δ / Ε button to select
Select the desired programme number (0 to 99) with
button or NUMBER buttons. Any number under 10 is
entered with
8.
a
numeric '0' in front of
Press the OK button to store it. The
System
Channel
Fine
Search
Name
Storage
V
it, i.e. '05' for
BG
UHFO1
{{{
CO01
1
Stored
9.
10
To store another
5.
display Stored will
station, repeat steps
4 to 8.
appear.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Δ / Ε button to select Name.
Press the Γ button. You can use a blank, +,
and the alphabet A to Z.
Station
Menu
1 to 3.
Press the
-,
the numeric 0 to 9
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
4.
Φ button
you can select in the opposite direction.
Select the next position by pressing the OK button and then take
your choice of the second character, and so on.
5.
Repeat
With the
the 'Manual programme
Fine
viewing.
tuning
Normally
fine
tuning
is
only
necessary if
reception
the 'Manual programme tuning'
Δ / Ε button to select Fine.
1.
Repeat
2.
Press the
AV
7 to 8.
tuning' steps
Press the TV/AV button to return to normal TV
()OOKOMENUOTV
steps
is poor.
1 to 3.
1
2
3
4
5
6
7
8
MENU
9
TV/AV
0
System
Channel
V
Fine
Search
Name
BG
UHFO1
PR
{{{
Storage
CO01
1
()O}{OOKOMENUOTV
AV
VOL
OK
VOL
PR
3.
Press the
Φ
/
Γ
button to fine tune for the best
picture
and
sound.
4.
5.
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV button to return to normal TV viewing.
Repeat
The
ber
finely tuned programme will be
during programme selection.
indicated
by
a
yellow
num-
11
TV stations
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUOTV
AV
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert
a
blank station data into the selected programme number.
press the MENU button to select the Station
/ Ε button to select Programme edit.
1.
Repeatedly
2.
Press the
3.
Press the OK button to
Δ
display
the
Programme edit
menu.
menu.
0OOOOCR01OOOOOO5OOS R07
1 OOCD05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R12
3OOOOSR02OOOOOO8OOC R15
4OOOOCR06OOOOOO9OOS R05
1
2
3
4
5
6
7
8
9
OODeleteO O Copy
OOMoveO OOOOSkip
()O}{OOKOMENUOTV
MENU
TV/AV
Deleting
1.
2.
0
programme to be deleted with the
Press the RED button twice.
Copying
1.
OK
programme
a
The selected programme is deleted,
grammes are shifted up one position.
PR
VOL
a
Select
AV
VOL
2.
Δ
/
Ε or Φ
all the
/
Γ
button.
following
pro-
a
programme
programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Select
a
or Φ
/
Γ
button.
position.
one
PR
Moving
1.
2.
3.
a
programme
programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
Select
a
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
0OOOOCR01OOOOOO5OOS R07
1 OOCD05
OOOO6OOS R07
2OOOOCR07OOOOOO7OOC R12
3OOOOSR02OOOOOO8OOC R15
4OOOOCR06OOOOOO9OOS R05
OOMoveRoff
()O}{OMENUOTV
Skipping
a
Select
a
1.
AV
programme number
programme number to be
skipped
with the
Δ
/ Ε
or Φ
/
Γ
button.
2.
3.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
Displaying programme table
Press the LIST button to display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0OOOOCR01OOOOOO5OOS R 07
1OOCD05
OOOO6OOS R 07
2OOOOCR07OOOOOO7OOC R 12
3OOOOSR02OOOOOO8OOC R 15
4OOOOCR06OOOOOO9OOS R 05
()O}{OOKOMENUOTV
Note
AV
:
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Selecting
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
TV/AV
PR
VOL
OK
PR
VOL
LIST
a programme table
programme table pages which contain 100 pro-
Paging through
There
are
10
grammes.
Pressing the
Δ
/ Ε
or Φ
/
Γ
button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
Picture
Contrast
Brightness
Colour
Sharpness
Tint
()O}{OOKOMENUOTV
100
95
85
80
0
AV
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
/ Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
1.
Repeatedly
2.
Press the
3.
Δ
Contrast
Brightness
Colour
Sharpness
Tint
4.
100
95
85
80
0
Press the OK button to store it for the
The
display Stored
picture User.
appears.
MENU
Press the TV/AV button to return to normal TV
PR
VOL
appears. The
VOL
OK
PR
PSM
14
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
Sound
Sound
You
adjustment
Sound
Menu
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer, balance. If you switch AVL to on, the set automatically keeps
on an equal volume level even if you change programmes.
can
Speech
1.
2.
3.
press the MENU button to select the Sound menu.
Press the Δ / Ε button to select the desired sound item; Equalizer,
Balance or AVL.
Press the Φ / Γ button to make desired adjustment.
Press the OK button in Equalizer to set the Equalizer User.
OEqualizer
OBalance
OAVL
0
Off
O
()OOKOMENUOTV
AV
Repeatedly
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENUOTV
AV
MENU
Press the
Δ
/
Ε
button to select your
Speech or User.
preferred setting
;
TV/AV
Flat,
Music, Movie,
To set the Equalizer User,
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
a.
Press the TV/AV button to return to normal TV
VOL
OK
VOL
PR
viewing.
The sound Flat, Music, Movie and Speech are programmed for
optimum sound reproduction at the factory and cannot be changed.
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is equipped with a receiver for NICAM reception, the high
quality NICAM (Near Instantaneous Companding Audio Multiplex)
digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
I/II
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV and AV modes
Special
Menu
Inputs
can
be set for TV
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a
video
is connected to the set.
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
press the MENU button to select the
/ Ε button to select Input.
1.
Repeatedly
2.
Press the
3.
Press the Φ / Γ button to select TV, DVD, AV
The AV mode and external equipments are :
DVD
:
Δ
Special
or
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
()O}{OMENUOTV
AV
menu.
SAV.
COMPONENT connected to the DVD/DTV IN sockets of
the set
AV
: VCR connected to the AV sockets of the set
1
2
3
SAV
4
5
6
7
8
:
S-VIDEO VCR connected to the S-VIDEO sockets of the set
To return to TV
mode, press the
Δ
/
Ε or
NUMBER buttons.
MENU
Alternatively you can select the
the TV/AV button.
TV, DVD
or
AV mode
by pressing
9
TV/AV
0
PR
Child lock
VOL
The TV
can
be set
so
control it. This feature
can
be used to
prevent unauthorized viewing.
press the MENU button to select the
/ Ε button to select Child lock.
1.
Repeatedly
2.
Press the
3.
Press the
4.
Press the TV/AV button to return to normal TV
Δ
Φ
/
Γ
VOL
that the remote control handset is needed to
button
on
Special
PR
menu.
the remote control handset to select On.
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note
:
The
any button
display Child lock on will
the front panel is pressed
on
not appear
while
on
the
displaying
screen
the
if
menus.
17
Other functions
Special
Auto
Menu
TV
Off
Off
Off
Input
ChildOlock
AutoOsleep
BlueOback
sleep
If you select Auto sleep On the set will automatically switch itself
standby mode approximately ten minutes after a TV station stops
to
broadcasting.
()O}{OMENUOTV
AV
press the MENU button to select the
/ Ε button to select Auto sleep.
Φ / Γ button to select On.
1.
Repeatedly
2.
3.
Press the
Press the
4.
Press the TV/AV button to return to normal TV
Blue back
Special
menu.
Δ
viewing.
(option)
If you select Blue back On, the blue background appears
when there is no or poor signal.
on
the
screen
1.
MENU
TV/AV
2.
3.
4.
PR
VOL
menu.
SLEEP
VOL
PR
press the MENU button to select the Special
Press the Δ/Ε button to select Blue back.
Press the Φ / Γ button to select On or Off.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180
and 240. The timer
begins
to count down from the number
of minutes selected.
Note :
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
18
Teletext
Teletext
(or
TOP
with the teletext
Teletext is
a
text)
is
system
an
can
optional function,
information
grammes, share
prices
therefore
only
a
set
receive the teletext broadcast.
free service broadcast
up-to-the-minute
(option)
on
by
most TV stations which
news,
and many other
The teletext decoder of this TV
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre-
sponding
methods
page number. TOP and FASTEXT are more modern
and easy selection of teletext information.
allowing quick
1
2
3
4
5
6
7
8
Switch on/off
Press the TEXT button to switch to teletext. The initial page
page appears on the screen.
or
last
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selec-
9
TV/AV
0
tion, while the second shows the
Press the TEXT
or
current page displayed.
TV/AV button to switch off teletext. The
previous
mode reappears.
PR
OK
SIMPLE text
PR
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the
lowing
TEXT
MODE
preceding
or
fol-
M
page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
buttons, select the page you wish to programme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
3.
4.
Using
a
coloured button.
the NUMBER
19
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
1
2
3
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4.
The
red
button
the
Alternatively
4
5
6
7
8
9
to
permits
Ε
button
can
return
to
previous
existing
selection.
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
INDEX
2.
i
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
You
can
3.
Corresponding to the SIMPLE
page by entering its three digit
4.
The
along
the bot-
teletext mode, you can select a
page number with the NUMBER
buttons in FASTEXT mode.
Δ
lowing
20
/ Ε
button
page.
can
be used to select the
preceding
or
fol-
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
1
2
3
4
5
6
7
8
9
new
0
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
PR
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
MIX
TIME
REVEAL
SIZE
HOLD
screen
UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/
Ε
or
to exit this function.
21
Connection of external
You
can
connect additional
etc. to your set.
Examples
equipment
such
shown below.
equipment,
are
as
VCRs, camcorders
Aerial socket
L
VDEO(MONO)
AUDIO
R
L
VIDEO
R
AUDIO
R
L
SPEAKER OUT
AV
MONITOR OUT
ANT IN
DC OUT
L L 75Ω
12V/0.2A
1.
Connect the RF out socket of the VCR to the aerial socket
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel on a desired programme number
the 'Manual programme tuning' section.
4.
Select the programme number where the VCR channel
stored.
Press the PLAY button on the VCR.
4Ω/3W
VCR
5.
Component
1.
PB
Y
PR
L
COMPONENT(480/480p)
H/P
R
S-VIDEO
L
VDEO(MONO)
AUDIO
R
VIDEO
AV
is
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i/480p) to the
MONITOR O
2.
using
in sockets
COMPONENT sockets
L
AUDIO
DVD/DTVIN
on
(Y
PB
PR)
of DVD/DTV IN.
Connect the audio cable from the COMPONENT to the AUDIO
sockets of DVD/DTV IN.
COMPONENT
3.
Press the TV/AV button to select DVD.
(DVD/DTV)
4.
Press the PLAY button o n the COMPONENT.
The COMPONENT playback picture appears on the
screen.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to AV sockets
of the set
S-VIDEO
L
VIDEO(MONO)
AUDO
R
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
AV
ANT IN
DC OUT
LL 75Ω
12V/0.2A
4Ω/3W
MONITOR OUT
VCR
2.
Press the TV/AV button to select AV.
3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L (MONO) socket of the set.
Monitor out sockets
Connect the audio/video in sockets of the other TV
MONITOR OUT sockets of the set.
S-VIDEO
L
VIDEO(MONO)
AUDO
R
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
AV
MONITOR OUT
TV
22
4Ω/3W
ANT IN
LL 75Ω
DC OUT
12V/0.2A
or
monitor to
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
(SAV)
S-VIDEO VCR to the S-VIDEO
an
be further
equipment
socket, the
improved.
S-V DEO
L
VIDEO(MONO)
AUDIO
R
L
VIDEO
AUDO
R
L
R
ANT IN
DC OUT
L L 75Ω
12V/0.2A
SPEAKER OUT
AV
1.
MONITOR OUT
4Ω/3W
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of AV.
3.
Select SAV
4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the
Headphone
by pressing
the TV/AV button
S-VIDEO VCR
repeatedly.
screen.
socket
Y
PB
PR
L
COMPONENT(480/480p)
H/P
R
S-VIDEO
VIDEO(MONO)
headphone plug
Speaker
out sockets
L
AUDIO
R
VIDEO
L
AUDO
AUDIO
R
S
DVD/DTVIN
Insert the
AV
MONITOR OUT
headphone socket of the set.
You can listen to the sound through the headphones and TV's
speaker. To adjust the headphone volume, press the Φ / Γ button.
If you press the MUTE button, the sound from the headphone and
TV's speaker are switched off.
Connect the
on
the back
into the
left/right loud-speakers to the SPEAKER OUT sockets
panel of the set in case of installing speakers detached
from the set.
: The speakers provided with the TV can be installed in two
ways; mounted on or detached from the TV cabinet. In case of
being mounted on the TV cabinet, you don't have to connect them
Note
to the SPEAKER OUT sockets
using
L
VIDEO(MONO)
AUDIO
R
AV
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
4Ω/3W
MONITOR OUT
DC OUT
ANT IN
L L 75Ω
12V/0.2A
ANT IN
DC OUT
LL 75Ω
12V/0.2A
the standard audio cables
provided.
12V DC out socket
Connect the DC
plug
of the wireless AV transmitter (optional
on the back panel of the set.
O
VIDEO(MONO)
L
AUDIO
R
VIDEO
L
AUDIO
R
R
L
SPEAKER OUT
AV
MONITOR OUT
4Ω/3W
parts)
to the DC OUT socket
23
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF