LG | MT-60PZ90V | LG MT-60PZ90V Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
Please read this manual
carefully
before
operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
tion to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0440A
cover
require
(RF03LA,
and quote this informa-
service.
067Y TX,
373-026H)
b
LG Plasma Monitor
What is
a
If
is
voltage
Plasma
inputted
Display
to gas in
?
glass panels,
ultraviolet rays is
moment, light is emitted. A Plasma Display is
160°
-
Wide
A Plasma
a
next
outputted and fused with a fluorescent
generation flat Display using this phenomenon.
substance. At this
range of vision
without distortion from
range of vision
angle
Display provides
than 160°
more
angle
so
that you
can
get
a
picture
any direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
screen
The
screen
of
a
Plasma
Multimedia Plasma
A Plasma
and
The
Display
can
Display
is 60"
so
that you
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
a
computer
so
that you
can use
it
as a screen
for
conference, game, internet
so on.
explanation
about coloured dots may be present
The PDP which is the
display
device of this
product
is
composed
on
PDP
screen
of 0.9 to 2.2 million cells and
The
in the manufacture of the PDP. Several coloured dots visible
explanation
In the
on
the
a
few cell defects
acceptable, in line
PDP manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
responds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
occur
screen
would be
can
with other
which
cor-
about noise of 60" PDP
way that a fan is used in a PC to keep the CPU cool, the PDP is equipped with cooling fans to improve the
of this product. Therefore, a certain level of noise could occur when the fan is operated. This noise doesn't have
same
reliability
any negative effect on its efficiency and liability and it's also determined to have no difficulty while using this product. The
noise from the fans is normal in the operation of this product. We hope you will understand that a certain level of noise is
acceptable.
It
means
that it is not
changeable
nor
refundable.
TO AVOID BURNING IMAGE INTO THE DISPLAY, DO NOT HAVE A STILL IMAGE ON SCREEN FOR EXTENDED PERIOD
OF TIME. IMAGE AFTER BURN WILL NOT BE COVERED UNDER WARRANTY ie.Menus, Video games, Borders
or
LOGOS
WARNING
This is Class A
case
the
user
product. In a domestic environment this product
may be required to take adequate measures.
may
cause
radio interference in which
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Contents
SafetyInstructions................................................4
Equipment Connections
and
Setup
ControlsoftheMonitor.............................................6
WatchingExternalEquipments.......................................7
DisplayableMonitorSpecification....................................10
ControlsoftheRemotecontrol......................................11
Monitorinstallation...............................................13
Basic Features Setup and Operation
TurningontheMonitor............................................14
Menulanguagesetup(option)......................................14
VIDEO Menu
PSM(PictureStatusMemory).......................................15
AdjustingAutoColourControl.......................................15
.15
ManualColourTemperatureControl(Useroption).
ManualpictureControl(Useroption).................................15
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AUDIO Menu
SSM(SoundStatusMemory).......................................16
AVL(AutoVolumeLeveler).........................................16
AdjustingSound(Useroption)......................................16
TIME Menu
SettingtheClock................................................17
SettingtheOn/OffTime...........................................17
AutoSleep.....................................................17
SleepTimer....................................................17
SPECIAL Menu
Childlock......................................................18
ISM(ImageStickingMinimization)Method.............................18
Lowpower.....................................................19
Cinema (AV (AV1 or AV2), S-VIDEO and COMPONENT 480i mode only)
.19
MenuRotationForVerticalViewing..................................19
.
.
.
.
.
.
.
.
.
.
SCREEN Menu
Autoadjustment(RGB[PC]modeonly)................................20
SettingPictureFormat............................................20
PictureSizeZoom...............................................20
ScreenPosition.................................................21
ManualConfigure(RGB[PC]modeonly)..............................21
.21
Adjustments (AV (AV1 or AV2), S-VIDEO and COMPONENT 480i mode only)
Initializing(Resettofactoryvalue)...................................21
.22
SelectingWideVGA/XGAmode(RGB,DVI[PC]modeonly)
LuminanceNoiseReduction(option).................................22
SplitZoom.....................................................22
Screen
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
PIP Function
WatchingPIP...................................................23
PIPAspectRatio................................................23
MovingthePIP.................................................23
SwappingthePIP...............................................23
MainPictureSizeAdjustment.......................................23
SelectingasourceinputsignalforthePIP.............................23
PIPSize.......................................................23
MainPicturePositionAdjustment....................................23
TWIN Picture
MainPictureSizeAdjustment.......................................24
SubPictureSizeAdjustment.......................................24
SelectingasourcefortheTwinPicture................................24
SwappingtheTwinPicture.........................................24
ExternalControlDeviceSetup....................................25
After
reading
this
manu-
al, keep it in the place
where the
always
user can
contact
easily.
Others
IRCode(NECFormat)............................................31
Troubleshootingchecklist.........................................34
Productspecifications............................................35
3
Instructions
Safety
Use the Monitor at the
-
lower than the altitude of 6562 feet
place
(2000m)
to
get the best quality of picture
and sound.
W
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
Do not
use
room or
fire.
the Monitor in
any
This may
-
cause a
place
cause a
Do not
-
damp place such as a bathlikely to get wet.
where it is
fire
could
or
give
an
electric shock.
In
cable
antenna
building
to
and
damaged
damaged
of smoke
or
the Monitor
could
give
an
electric
strange smell from the Monitor,
,unplug it from the
your dealer
or
This may
cleaning.
or
wall outlet and contact
service center.
cause a
fire
or
could
give
an
electric shock.
outside
Do
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
case
water the Monitor while
cause
switch it off
-
Bend
use
This may
shock.
inside the Monitor and could
not
attempt
to
Contact your dealer
-
This may
shock.
cause
service
or
the
Monitor
yourself.
service center.
damaged
the Monitor
or
could
give
an
electric
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
a
danger
of
electric shock caused
-
If
er
grounding
should be
methods
are
employed
not
During
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
possible, a separate circuit breakby a qualified electrician.
and installed
-
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
Power
supplier
Short-circuit
breaker
-
Do not connect
ground
to
telephone wires, lightning
rods
or
gas
pipe.
Do not
placing anything containing liquid
on
top of
the Monitor.
-
This may
cause a
Do not insert any
-
This may
Do not
-
cause a
fire
or
could
cause
an
or
could
serious
injury
give
on
to
a
an
4
This set is
vent.
electric shock.
the Monitor.
child
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
give
or
adult.
only
supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
damage
or
death.
of the
product.
Take
care
of
under
danger that may happen
specific condition.
NOTE
Never touch the power
-
This may
cause an
plug with
wet hand.
a
Do not
electric shock.
aged
plug
the
or
when the power cord or the plug is damconnecting part of the power outlet is
loose.
Disconnect from the mains and
tions before
Do not
as a
-
all
connec-
-
This may
cause a
fire
or an
electric shock.
moving.
place the Monitor
bookcase
Ventilation
remove
in
a
built-in installation such
rack.
or
Dispose of used batteries carefully
eating them.
to
protect
a
child
from
-
In
case
that it eats them, take it to
see a
doctor
immediately.
required.
When
moving the Monitor assembled with speakers
holding the speakers.
do
not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
This may
shock.
cause
damaged
the Monitor
Contact the service center
once
or
could
a
year to clean the
give
an
electric
internal part of the Monitor.
When
to
-
installing the Monitor on
place the edge of its stand.
table,
a
be careful not
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
-
Accumulated dust
can cause
mechanical failure.
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
screen.
Do not
place
an
outside antenna in the
head power lines
cuits.
-
This may
cause an
other electric
or
vicinity of overlight or power cir-
-
If not, eyes will strain.
Unplug the Monitor
from the wall outlet when it is left
unattended and unused for
electric shock.
-
Accumulated dust may
deterioration or electric
Only
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
antenna
touching
-
an
outside
power lines to keep the former from
the latter even when the antenna falls.
This may
Do not
-
enough distance between
and
cause an
pull the
This may
electric shock.
cord but the
cause a
plug
when
unplugging.
fire.
Ensure the power cord doesn't trail
like a heater.
across
any hot
objects
-
This may
cause a
fire
or an
electric shock.
5
Controls of the Monitor
-
-
Shown is
a
simplified representation
of the Monitor.
Here shown may be somewhat different from your set.
<Front Panel Controls>
ON/OFF
INPUT
ON/OFF
SELECT
VOLUME
Main Power Button
Remote Control Sensor
Power
INPUT
SELECT
VOLUME
(
Illuminates green when the
Monitor is turned on
) Buttons
,
Standby Indicator
standby mode,
Illuminates red in
VOLUME
INPUT SELECT Button
Sub power button
<Back Panel>
REMOTE CONTROL
RS-232C INPUT
(CONTROL/SERVICE)
RS-232C
INPUT
DVI INPUT
RGB INPUT
AUDIO INPUT
RGB OUTPUT
()R ()
RGB
OUTPUT
RGB INPUT
Connection to PC
6
15-pin
cable and
a
DVI cable
YP BPR
R AUDIO L (MONO)
COMPONENT INPUT
S-VIDEO
VIDEO
INPUT
are
AUDIO INPUT
S-VIDEO
INPUT
COMPONENT INPUT
Connection to AV
Note: The connection cables shown above to the
A D-sub
R AUDIO L
AUDIO INPUT
AUDIO
INPUT
AUDIO
INPUT
DVI INPUT
()L ()
EXTERNAL SPEAKER
right are not included with the Monitor.
provided to connect the Monitor to a PC.
AC INPUT
AUDIO
INPUT
VIDEO
INPUT
equipment
External
Watching
Equipments
<Back Panel>
RCA
Type
()R ()
1
Scart
2
3
AUDIO
()L ()
YP B
PR
4
AUDIO
(MONO)
5
6
Type
()R ()
()L ()
5
1.
RS-232C
INPUT(CONTROL/SERVICE)
Connect to the RS-232C
2.
port
on a
PORT
5.
PC.
EURO SCART SOCKET
DVI INPUT / RGB INPUT / AUDIO INPUT SOCKETS
Connect the monitor
output
socket of the PERSONAL
:
The interface board (AP-60EA30/31) is not
equipped on MT/MZ-60PZ92 series models. Contact your
dealer for buying this optional item.
Note
COMPUTER to this socket.
RGB OUTPUT SOCKET
You
can
watch the RGB
signal
on
another
monitor,
nect RGB OUTPUT to another monitor's PC
3.
con-
6.
input port.
REMOTE CONTROL
Connect your wired remote control to the Remote
the Monitor.
4.
AUDIO / COMPONENT INPUT / S-VIDEO / VIDEO INPUT
/ AUDIO INPUT SOCKETS
port
on
POWER CORD SOCKET
This Monitor
operates
indicated
the
on
on
an
AC power. The
Never
Specifications page.
operate the Monitor
on
voltage
is
attempt
to
DC power.
EXTERNAL SPEAKER OUTPUT
Connect to
*
(8 ohm)
speaker(s).
information, refer to 'Speaker
optional
For further
external
&
Speaker
Stand' manual.
7
VCR (When the Interface board is installed.)
Watching
When
connecting the Plasma Monitor with
Audio(L) white, Audio(R) -red).
Connect the VIDEO INPUT socket(yellow)
external
equipments,
match the colours of
connecting ports (Video
-
yellow,
-
with the BNC-RCA adapter to the VIDEO INPUT socket of the set.
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
4:3 picture format or if a CH label is present; the fixed image may remain visible on the screen.
Use the orbiter function to avoid having a fixed image. (Refer to p.18)
1. Press INPUT SELECT button on the remote control and select AV or (AV 1 or AV 2 ).
(When connecting with S-Video, select the S-Video.)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's
Watching
After
from
a
VCR,
manual)
Cable TV (When the Interface board is installed.)
subscribing
to
a
cable TV service from
This monitor cannot
ming.
picture
display
TV
a
local
programming
and
provider
without
a
installing
a
can watch cable TV programcable TV converter box connected to the
converter, you
TV tuner device
or
monitor.
1. Press INPUT SELECT button on the remote control and select AV
2. Tune to cable service provided channels using the cable box.
Watching
When
Or,
external AV
connecting
source
(When the Interface
the Plasma Monitor with external
board is
equipments,
or
(AV 1
or
AV 2 ).
installed.)
match the colours of
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
connecting ports.
1. Press INPUT SELECT button on the remote control of the monitor to select AV or (AV 1 or AV 2 ).
2. Operate the corresponding external equipment. (See external equipment operating guide.)
Watching
DVD (When the Interface board is installed.)
How to connect
Connect DVD video
INPUT)
Or,
and audio
inputs
inputs
to
Y, PB, PR of COMPONENT (DVD
to Audio sockets of AUDIO INPUT.
connect the Euro scart socket of the VCR to the Euro scart socket
?
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
below.
Component ports
of the
Monitor
YPBPR
of the set.
How to
use
1. Press INPUT SELECT button
select
2.
8
Component
or
(AV 1
on
or
the remote control of the monitor to
AV 2 ).
Try this after turning on the DVD player.
(Refer to the DVD player's manual for operating instructions.)
Video
output ports
of DVD
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
DTV
Watching
-
To watch
top
Setup (option)
broadcast programs,
digitally
purchase/connect
digital
a
Mode
set-
box.
How to connect
Connect DTV
user-supplied Digital Set-Top
a
set-top box video output
-
to
Box
Connect DTV
set-top box audio outputs
Input signal
Terminal
Component
RGB
(DTV)
576p(50Hz)
o
x
1080i(50Hz)
o
o
monitor COMPONENT
(DVD/DTV INPUT) or to the monitor RGB (PC/DTV INPUT)
depending on your set-top box connectors.
-
DTV
?
connector
to monitor AUDIO INPUT
jacks.
How to
1. Turn
use
the a digital set-top
digital set-top box)
on
2. Use INPUT SELECT
on
box.
(Refer
to the owner's manual for the
the remote control to select
Component
or
RGB.
Connecting
-
-
-
PC
To
enjoy vivid picture and sound, connect a PC to the Monitor.
Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Connect PC to the RGB INPUT(PC INPUT) or DVI INPUT(DIGITAL RGB INPUT) ports of the Monitor after changing the
resolution of PC.
-
There
some
change
might
until the
a
picture
-
-
-
-
-
-
or brightness in PC mode. Then change
adjust the brightness and contrast on the
not be changed, change the PC graphic card
contrast
the refresh rate into other rate
is clean. If the refresh rate of the PC
consult it to the manufacturer of the PC
graphic
graphic
card
can
or
card.
Synchronization input form; Separate
Setup Instructions
-
resolution, vertical pattern,
to
or
menu
-
noise
according
or
-
be
the PC mode into other resolution
to Connect
a
We recommend 1024x768 60Hz
PC to your Monitor
or 1366x768 75Hz as the PC mode
providing the best picture quality.
INPUT(PC INPUT) port of the Monitor or the
signal cable from the DVI output port of the PC to the DVI INPUT(DIGITAL RGB INPUT) port on the Monitor.
Connect the audio cable from the PC to the Audio input on the Monitor. (Audio cables are not included with the Monitor).
If using a sound card, adjust PC sound as required.
This monitor apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically to use this monitor.
DDC protocol is preset for RGB (Analog RGB), DVI (Digital RGB) mode.
If required, adjust the monitor settings for Plug and Play functionally.
If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB and DVI
to display the PC on the monitor.
If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB or DVI; (the
other mode is set to Plug and Play automatically by the monitor.)
Connect the
signal
cable from the monitor
PC Setup
1. Turn on the PC and
2. Turn
on
the
apply power to
display by pressing the
3. Use the INPUT SELECT button
4. Set the resolution
on
output of the PC
?
For further information
?
To avoid
?
To avoid
output port of the PC
to the RGB
the Monitor.
POWER button
on
the Monitor's remote control.
the remote control to select the RGB
to XGA
or
under
or
DVI
input
source.
(1280x1024, 63.981Hz).
regarding cable TV service, contact your local cable TV service provider(s).
picture noise (interference), leave an adequate distance between the VCR and monitor.
burning an image on the Monitor screen, don't have a still picture on the screen for a long period
time.
9
Monitor
Displayable
Specification
RGB / DVI mode
Resolution
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
640x350
31.469
70.08
37.927
85.03
31.469
59.94
35.000
66.66
37.861
72.80
720x400
640x480
848x480
852x480
37.500
75.00
43.269
85.00
31.500
60.00
35.000
70.00
37.500
75.00
31.500
60.00
35.000
70.00
37.500
75.00
35.156
56.25
37.879
60.31
800x600
832x624
1024x768
46.875
75.00
53.674
85.06
49.725
74.55
48.363
60.00
56.476
70.06
60.023
75.02
47.700
60.00
59.625
75.02
47.700
60.00
1360x768
1366x768
1152x864
10
75.02
54.348
60.05
63.995
70.01
67.500
75.00
1280x960
60.023
60.02
1280x1024
63.981
60.02
(Synchronization input
?
59.625
form
DOS mode may not work
:
separate)
depending
on
video card if
using
a
DVI-I cable.
Controls of the remote control
-
-
When
using the remote control aim it at the remote control sensor of the Monitor.
maybe defect in consecutive operation of remote control in specified brightness according
There's
to this monitor fea-
ture.
POWER
1.
switches the set
from
on
standby
or
off to
standby.
SLEEP
2.
sets the
PSM
3.
timer.
sleep
(Picture Status Memory)
preferred picture setting.
recalls your
POWER
1
SLEEP
ARC
(Aspect Ratio Control)
changes the picture format.
4.
INPUT SELECT
13
2
PSM
SSM
3
14
ARC
PIP
5.
PIP ARC
switches the sub
15
4
PIP
TWIN PICTURE
5
16
SWAP
on or
off.
SWAP
6.
alternates between main and sub
SUB INPUT
6
picture
17
MENU
MUTE
7
18
picture.
MENU Button
7.
selects
a menu.
8./
OK
VOL
selects
VOL
8
/
item.
a menu
(Volume Down/Up)
the volume.
adjusts
adjusts
menu
settings.
OK
the current mode.
displays
123
9.
456
10. VCR BUTTONS
9
78
NUMBER BUTTONS
control
9
LG video cassette recorder.
a
11. WIN. SIZE
0
the sub
adjusts
size.
picture
12. ZOOM-/ZOOM+
10
POWER
STOP
P/STILL
REW
PLAY
FF
13. INPUT SELECT BUTTON
selects
14. SSM
REC
WIN.SIZE
WIN.POSITION SPLIT ZOOM
11
12
ZOOM
-
ZOOM
+
or
PC monitor mode.
(Sound Status Memory)
preferred sound setting.
recalls your
19
20
TV, AV
15. PIP ARC
changes
the
picture
format of PIP.
16. TWIN PICTURE
17. SUB INPUT
selects the
input
mode for the sub
picture.
18. MUTE Button
switches the sound
on or
off.
19. SPLIT ZOOM
enlarge
the
screen
with
regular
ration.
20. WIN.POSITION
moves
Installing
the sub
picture
to
/
or
/
direction.
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
Apply
new
the back side and
polarity.
two 1.5V alkaline batteries of AAA
used batteries with
?
cover on
type. Don't mix the
batteries.
Install the batteries with the correct
polarities.
11
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
PIPARC
PIP
TWINPICTURE
SWAP
SUB INPUT
MENU
MUTE
OK
VOL
VOL
123
456
78
9
0
POWER
REW
STOP
P/STILL
PLAY
FF
LG TV
1.5V
REC
WN.SIZE
ZOOM
WIN.POSITION SPLITZOOM
-
1.5V
ZOOM+
ASmark
Owner's Manual
D-sub 15
Optional
-
pin
cable
BNC-RCA
Alkaline batteries
Remote control handset
Power cord
DVI cable
adapter (optional)
Phone scart cable
(Optional)
Extras
Optional
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
-
Contract your dealer for
Tilt wall
mounting
Desktop
buying
bracket
stand
Ceiling mounting
12
these items.
bracket
Wall
mounting
bracket
Speakers
Video cables
Vertical Wall
mounting
Desktop Speaker
bracket
stand
PC audio cables
Monitor Installation
?
The Monitor
?
Install this monitor
be installed in various ways such such as on a wall, or on
only in a location where adequate ventilation is available.
?
This monitor is
can
designed
to be mounted
horizontally
or
Wall Mount: Horizontal installation
?
The monitor
can
be installed
on
the wall
as
shown
?
The monitor
can be installed vertically on the wall as
above.(For further information, refer to the
optional 'Wall Mounting Bracket Installation and Setup
Guide'.)
Caution: When installing the monitor vertically, the
front panel controls must be in the left-down side posi-
shown
tion
?
?
etc.
Wall Mount: Vertical installation
(For further information, refer to the optional
'Wall Mounting Bracket Installation and Setup Guide'.)
Speakers are optional, and shown for illustration only.
Desktop
desktop
vertically.
above.
?
a
as
shown above.
Speakers
are
optional,
and shown for illustration
only.
Pedestal Installation
The Monitor
can
be mounted
on a
desk
as
shown
above.
?
(For further information, refer to the optional
Desktop Stand Installation and Setup Guide.)
Speakers and speaker stands shown are optional,
and shown for example only.
13
Caution
?
?
When
installing the monitor vertically, you have to change the OSD display
correctly and also to protect the monitor from overheating (Refer to P. 19).
Install this monitor only in a location where adequate ventilation is available.
To Mount
Wall
on a
To Install
Wall mount minimum allowable clearances for
adequate
on a
mode
so
that the
menus
will appear
Desktop
Pedestal mount minimum allowable clearances
ventilation
for
adequate
ventilation
10cm
3cm
10cm
10cm
10cm
Turning
When
-
Turning
1.
2.
using the
on
on
remote
the Monitor
Connect power cord
Press the
r /
I,
the Monitor
control,
just
aim it at its
correctly.
ON/OFF button
INPUT SELECT button
1.
the Monitor. At this moment, the Monitor is switched to
on
on
the Monitor
the Monitor
Press the
Press the
press the
1.
ON/OFF button
POWER,
cord is still
on
The
be
ON/OFF button
the Monitor to turn
on
on
the Monitor
ON/OFF button
on
the level of sound and
displayed
on
the
Press the MENU button and then
3.
Press the
From this
button and then
use
screen
volume( )
in desired
/
use
button and then
use
point
on, the
on-screen
/
/
14
Repeatedly
on
the Monitor
language.
First select your
button to select the SPECIAL
button to select
Language.
button to select your desired language.
will be presented in the language of
display
press the MENU button to return to normal
on
button decreases the level of sound.
your choice.
4.
mode. Press the
the remote control
the Monitor.
menu.
Press the
on
connected)
language setup (option)
menu can
2.
standby
POWER, INPUT SELECT button
the Monitor and then press the r / I, INPUT SELECT button
INPUT SELECT button on the remote control to turn on the Monitor.
Adjusting volume level
Volume( ) button increases
Menu
-
ON/OFF button
press the
If the Monitor is turned off with the remote control and also the
?
?
(power
or
on.
If the Monitor is turned off with the
?
2.
on
the Monitor.
after installation
and then the Monitor will be switched
Turning
sensor on
viewing.
language.
the Monitor
or
VIDEO Menu
PSM
-
-
(Picture Status Memory)
This function
adjusts the Monitor to the best picture appearance.
adjusting picture options (contrast, brightness, colour, sharpness
automatically changed to User.
When
is
and tint
(NTSC input only)) manually,
PSM
1. Press the PSM button.
?
Each press of the PSM button
changes
You
?
Picture
the
-
Dynamic, Standard,
options Dynamic, Standard
factory and cannot be changed.
Adjusting
-
also select
can
screen
display
as
Standard
Dynamic
?
the
shown below.
Mild
Mild
User in the VIDEO
or
and Mild
User
menu.
preset and programmed for good picture quality
are
at
Auto Colour Control
To initial values
(reset
When
color
adjusting
to default
select the 'Normal'.
settings),
temperature options (red, green,
1.
Press the MENU button and then
2.
Press the
/
use
blue) manually,
or
CSM is
button to select the VIDEO
automatically changed
menu.
VIDEO
to User.
PSM
CSM
button and then
button to select CSM.
/
use
Colour
TIME
Press the
3.
button to select the desired colour
/
temperature.
SPECIAL
4.
Repeatedly
?
press the MENU button to return to normal
Each press of
/
button
changes
Manual Colour
You
can
screen
Temperature
change red,
green and blue to
Press the MENU button and then
2.
Press the
as
100
Brightness
60
colour
50
Sharpness
50
Warm
User
TWIN
shown below.
MENU
Prev.
User
(User option)
adjust
use
Normal
Cool
temp.
Contrast
SCREEN
Warm
Control
1.
viewing.
display
Cool
Normal
-
the
G
AUDIO
/
colour
temperature you prefer.
button to select the VIDEO
menu.
VIDEO
PSM
CSM
button and then
use
/
button to select the Colour
AUDIO
temp..
TIME
3.
Press the
button and then
use
/
button to select colour
temperature items.
SPECIAL
4.
Press the
?
5.
The
-
-
adjustment
Repeatedly
Manual
-
You
button to make
/
appropriate adjustments.
picture
control
G
temp.
Contrast
100
Brightness
60
Colour
50
Sharpness
50
Red
0
Green
0
Blue
0
SCREEN
range of Red, Green and Blue is -20~+20.
press the MENU button to return to normal
Colour
TWIN
viewing.
MENU
Prev.
(User option)
adjust picture contrast, brightness, colour, sharpness and tint to the levels
In the broadcasting system PAL/SECAM, the picture item TINT doesn't work.
PIP settings are not adjustable.
can
1.
Press the MENU button and then
2.
Press the
button and then
use
/
button to select the desired
3.
Press the
button and then
use
/
button to make
use
/
button to select the VIDEO
menu.
you
prefer.
VIDEO
PSM
picture
item.
AUDIO
Colour
TIME
appropriate adjustments.
SPECIAL
4.
Repeatedly
press the MENU button to return to normal
CSM
viewing.
temp.
Contrast
70G
Brightness
60
Colour
50
Sharpness
50
SCREEN
TWIN
MENU
Prev.
15
AUDIO Menu
SSM
-
-
1.
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects
the appropriate sound option based on the program content.
When adjusting sound options (treble, bass, and balance) manually, SSM is automatically changed to User.
Press the SSM button to select the
Flat
?
AVL
-
1.
2.
3.
4.
You
can
(Auto
Speech
User
Speech
or
User in the AUDIO
menu.
Leveler)
an
equal
volume
Press the MENU button and than
Repeatedly
setup.
Movie
also select Flat, Music, Movie,
This feature maintains
Press the
appearance
Music
Volume
Press the
picture
button and then
button and then
use
use
use
/
/
level;
/
even
if you
change
channels.
button to select the AUDIO
button to select AV L
button to select On
press the MENU button to return to normal
menu.
VIDEO
SSM
AUDIO
AVL
TIME
Treble
50
Bass
50
or
G
Balance
.
Off.
0
SPECIAL
viewing.
SCREEN
TWIN
MENU
Adjusting
1.
Sound
Prev.
(User option)
Press the MENU button and then
use
/
button to select the AUDIO
menu.
VIDEO
SSM
AVL
2.
Press the
button and then
use
/
button to select the desired sound item.
AUDIO
TIME
3.
4.
Press the
Repeatedly
button and then
use
/
button to make
press the MENU button to return to normal
appropriate adjustments.
viewing.
0
50G
Bass
50
SPECIAL
SCREEN
TWIN
16
Balance
Treble
MENU
Prev.
On
Off
TIME Menu
Setting
the Clock
If current time
-
button
on
the
setting
is erased
by
Press the MENU button and then
1.
a
power
failure, if TV is unplugged
if the monitor is turned off with the
or
button to select the TIME
/
use
2.
Press the
button and then
use
/
button to select Clock.
3.
Press the
button and then
use
/
button to
menu.
VIDEO
AUDIO
Press the
5.
Repeatedly
Setting
button and then
button to
operates only if
The monitor must be in
-
G
--
:
--
Off time
the hour.
adjust
the minute.
Auto
sleep
SPECIAL
SCREEN
viewing.
TWIN
MENU
Prev.
the On/Off Time
current time has been
Off-timer function overrides on-timer function if
-
adjust
press the MENU button to return to normal
Timer function
-
/
use
Clock
On time
TIME
4.
ON/OFF
reset the clock.
monitor,
standby
they
already
are
set.
set to the
same
time.
mode for the On timer to work.
1.
Press the MENU button and then
2.
Press the
button and then
use
/
button to select On time
3.
Press the
button and then
use
/
button to select On.
use
button to select the TIME
/
menu.
VIDEO
Clock
or
Off time.
AUDIO
Off time
TIME
Auto
On time
G
sleep
On
Off
12
:
00
SPECIAL
Press the
4.
button and then
button and then
/
use
5.
Press the
6.
Only On time function; Press the
ume level.
7.
Repeatedly
/
use
Auto
1.
adjust
the minute.
press the MENU button to return to normal
step
Vol.
30
SCREEN
TWIN
/
use
button to
adjust
MENU
Prev.
vol-
viewing.
3.
Sleep
If there is
-
button to
adjust
the hour.
button and then
To cancel Off/On time function
Press the
button to select Off in
/
-
button to
no
input signal,
the monitor turn off
Press the MENU button and then
use
/
automatically
after 10 minutes.
button to select the TIME
menu.
VIDEO
Clock
2.
3.
Press the
Press the
button and then
button and then
use
use
/
/
button to select Auto
button to select On
or
sleep.
AUDIO
Off time
TIME
Auto
On time
Off.
sleep
GOn
Off
SPECIAL
4.
Repeatedly
press the MENU button to return to normal
viewing.
SCREEN
TWIN
Sleep
timer turns the monitor off at the
preset time.
Press the SLEEP button to select the number of minutes. The
-
display
by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
When the sleep time you want is displayed on the screen, press the OK
-
Prev.
Timer
Sleep
-
MENU
a.
To check the
b.
To cancel the
c.
If you turn
zz
Min will appear on the screen, followed
from the number of minutes selected.
---
button.
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
Min appears.
17
SPECIAL Menu
Child lock
-
The monitor
can
be set up
so
that it
1.
Press the MENU button and then
2.
Press the
button and then
only
can
button to select the SPECIAL
/
use
3.
Press the
button and then
4.
Repeatedly
press the MENU button to return to normal
/
use
menu.
VIDEO
Language
AUDIO
button to select Child lock.
/
use
be used with the remote control.
button to select On
or
TIME
Off.
This monitor
programmed
In Child lock
INPUT SELECT
-
pressed
ISM
-
on
option
it
Cinema
OSD Rotate
viewing.
was
Off
SCREEN
MENU
Prev.
last set to event if you turn the monitor off.
I, INPUT SELECT button on the monitor or POWER and
r /
the remote control.
With the Child lock
while
to remember which
'On', if the monitor is turned off, press the
On
Low power
Set ID
TWIN
-
G
ISM Method
SPECIAL
-
Child lock
On, the display
viewing
'
Child lock
'
appears
on
the
screen
if any button
on
the front
panel
is
the monitor.
(Image Sticking Minimization)
Method
Frozen still picture from a PC/video game displayed
image remaining even when you change the image.
screen for a long period of time.
1. Press the MENU button and then
use use
/
the screen for prolonged periods will result in an ghost
Avoid allowing a fixed image to remain on the Monitor's
on
button to select the SPECIAL
menu.
VIDEO
Language
AUDIO
2. Press the
button and then
use
/
button to select ISM Method.
Child lock
ISM Method
TIME
Low power
Set ID
SPECIAL
3. Press the
Orbiter
button and then
or
button to select either Normal, White wash,
Inversion. If you unnecessary to set this function, set Normal.
use
SCREEN
TWIN
?
White wash
White Wash
:
removes
permanent images from the
image may be impossible
viewing, press the any button.
nent
?
Orbiter
to clear
entirely
screen. Note: An excessive permawith White Wash. To return to normal
:
Orbiter may help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen, the
screen
?
will
move
Inversion
every 1 minutes.
:
This is the function to invert the
ly
4.
18
panel
color of monitor. The
panel
inverted every 30 minutes.
Repeatedly
press the MENU button to return to normal
viewing.
color is automatical-
Cinema
OSD Rotate
/
MENU
Prev.
G
Normal
White wash
Orbiter
Inversion
Low Power
-
This is the function to reduce the power
1. Press the MENU button and then
consumption
use use
/
of the monitor.
button to select the SPECIAL
menu.
VIDEO
Language
2. Press the
3. Press the
button and then
button and then
use use
use use
AUDIO
button to select Low power.
/
button to select On
/
or
ISM Method
TIME
Off.
Repeatedly
press the MENU button to return to normal
-
(AV (AV1
or
viewing.
When you watch the
only)
movie, this function adjusts the
appearance.
2. Press the
button and then
/
use use
set to the best
picture
button to select the SPECIAL
menu.
TIME
3. Press the
button and then
button to select Auto
/
use use
or
Repeatedly
press the MENU button to return to normal
Language
Child lock
ISM Method
Set ID
viewing.
SCREEN
G
OSD Rotate
MENU
Auto
Off
Prev.
Viewing
Press the MENU button and then
1.
Prev.
Cinema
TWIN
Menu Rotation for Vertical
MENU
Low power
Off.
SPECIAL
4.
Off
VIDEO
AUDIO
button to select Cinema.
/
use use
On
Cinema
SCREEN
AV 2), S-VIDEO and COMPONENT 480i mode
1. Press the MENU button and then
G
OSD Rotate
TWIN
Cinema
Low power
Set ID
SPECIAL
4.
Child lock
use
button to select the SPECIAL
/
menu.
VIDEO
Language
Child lock
2.
Press the
3.
Press the
button and then
/
use
button to select OSD Rotate.
AUDIO
TIME
button and then
/
use
button to select Normal
or
SPECIAL
?
?
Select Normal, if the monitor
Select Rotate, if the monitor
was
was
horizontally.
vertically.
Repeatedly
press the MENU button to return to normal
viewing.
G
Normal
Rotate
SCREEN
TWIN
4.
Low power
Cinema
OSD Rotate
installed
installed
ISM Method
Set ID
Rotate.
MENU
Prev.
19
SCREEN Menu
Auto
-
adjustment (RGB[PC]
mode
Automatically adjusts picture position
Press the MENU button and then
1.
2.
Press the
button and then
3.
Press the
button to start Auto
?
When Auto
?
If the
If
4.
-
-
picture
Although
needs to be
-
-
config.
menu.
adjusted
VIDEO
AUDIO
configure.
configure
ARC
Zoom In/Out
TIME
configure.
more
Auto
Position
Manual
Screen
SPECIAL
after Auto
adjustment
in
RGB(PC),
config.
adj.
Reset
XGA Mode
SCREEN
you
can
adjust
TWIN
MENU
Prev.
.
the
The Auto
image is still
configure and
correct, your Monitor is functioning properly but needs further adjustment.
the Manual config. functions don't need to be run for DVI mode.
not
This function doesn't work in
RGB-Digital
broadcast.
Picture Format
Setting
-
button to select Auto
/
use
image shaking.
button to select the SCREEN
/
use
configure has finished, OK will be shown on screen.
position of the image is still not correct, try Auto adjustment again.
the Manual
-
only)
and minimizes
You
can
watch the
You
can
repeatedly
You
can
screen
in various
14:9 and Zoom.
picture formats; 4:3, 16:9 (Wide),
press the ARC button to select your desired picture format.
also select 4:3, 16:9 (Wide), 14:9 and Zoom in the SCREEN menu.
4:3
Following selection will lead you to
appearing at both the left and right
view
with
picture
a
an
original
aspect ratio, with black bars
4:3
sides.
16:9
(Wide)
Following selection will lead you to adjust the picture horizontally,
entire screen (useful for viewing 4:3 formatted DVDs).
in
a
linear
proportion,
to fill the
14:9
You
can
enjoy
the
picture
just
14:9 is viewed
screen
format of 14:9
like that the
or
general
screen
4:3 is
TV programme through the 14:9 mode. The
to the left / right.
magnified
Zoom
selection will lead you to view the picture without any alternation, while filling the entire
However, the top and bottom portions of the picture will be cropped.
Following
screen.
-
You
can
only
select 4:3 and 16:9
(Wide)
in RGB
or
DVI.
Picture Size Zoom
?
When
enlarging
or
reducing
the
picture,
1. Press the ZOOM+/ZOOM- button to
2.
Adjust the main picture position
picture mode.
the
screen
enlarge
with the
/
may be
display
reduce the
or
/
/
unnatural
picture
buttons in
picture.
size.
enlarged
Zoom In
109%
20
G
To set
Screen Position
-
This function works in the
RGB-PC
-
You
are
or
following mode:
480p,720p,1080i.
function after adjusting
COMPONENT
available to this
Zoom In/Out in AV
(AV1
or
AV2),
S-Video
or
480i/576i
Component
modes.
1.
Press the MENU button and then
2.
Press the
button and then
use
/
3.
Press the
button and then
use
/
button to select the SCREEN
/
use
menu.
VIDEO
Auto
AUDIO
button to select Position.
button to
/
or
adjust
Zoom In/Out
the
TIME
position.
press the MENU button to return to normal
Repeatedly
viewing.
Manual
-
1.
Configure (RGB[PC]
If the
picture isn't
phase manually.
To correct the
mode
clear after auto
screen
Screen
3.
MENU
and
especially
that characters
are
still
the
trembling, adjust
/
use
button to select the SCREEN
menu.
button and then
5.
Press the
/
use
/
use
?
The
?
The
-
adjustment
adjustment
Repeatedly
Screen
button to make
/
button to select Manual
config..
button to to select Phase
or
configure
ARC
Zoom In/Out
TIME
Clock.
appropriate adjustments.
Position
Manual
config.
Screen
adj.
press the MENU button to return to normal
or
SCREEN
Press the MENU button and then
Press the
MENU
use
or
picture instability
/
while
viewing
a
video
button to select the SCREEN
only)
tape.
button and then
use
use
/
/
button to select Screen
menu.
VIDEO
button to to select TV
AUDIO
adj..
or
Select the VCR
if
TIME
VCR.
VCR.
option watching
option for other equipment.(Except VCR)
a
press the MENU button to return to normal
Initializing (Reset
to
Position
Manual
config.
Screen
adj.
G
TV
VCR
Reset
SCREEN
TWIN
Repeatedly
configure
ARC
Zoom In/Out
SPECIAL
4.
Prev.
viewing.
Auto
button and then
Select the TV
0
XGA Mode
TWIN
AV 2), S-VIDEO and COMPONENT 480i mode
trembling
1.
?
0
~
This is the function to correct
?
Phase
Clock
~
Adjustments (AV (AV1
Press the
G
Reset
31.
range of Phase is 0
+50.
range of Clock is -50
2.
3.
picture
VIDEO
AUDIO
SPECIAL
4.
Prev.
size, adjust Clock.
button and then
Press the
G
only)
adjustment
Press the MENU button and then
Press the
FE
XGA Mode
Auto
2.
G
config.
adj.
Reset
SCREEN
TWIN
-
D
Position
Manual
SPECIAL
4.
configure
ARC
YNR
MENU
Prev.
viewing.
factory value)
This function
operates in every mode.
To initialize the adjusted value
1.
Press the MENU button and then
use
/
button to select the SCREEN
menu.
VIDEO
Auto
configure
ARC
2.
Press the
button and then
3.
Press the
button to initialize the
use
/
button to select Reset.
AUDIO
Zoom In/Out
Position
TIME
adjusted
value.
Screen
SPECIAL
?
You
sub
can
initialize ZOOM
picture
size of twin
In/Out, Position, SPLIT ZOOM, PIP size, PIP position and
Manual
config.
adj.
Reset
G
To Set
XGA Mode
SCREEN
picture.
TWIN
MENU
Prev.
21
Wide VGA/XGA mode
Selecting
-
To
see a
normal
picture,
DVI
(RGB,
[PC]
match the resolution of RGB
mode and selection of VGA
or
XGA mode
1. Press the MENU button and then
on
use use
mode
only)
(640x480, 848x480, 852x480, 1024x768,
the SCREEN
button to select the SCREEN
/
1360x768
or
1366x768)
menu.
Auto
menu.
VIDEO
configure
ARC
Zoom In/Out
2. Press the
button and then
3. Press the
button and then
4.
press the MENU button to return to normal
use use
button to select VGA Mode
/
or
AUDIO
XGA Mode.
Position
Manual
use use
TIME
button to select the desired XGA resolution.
/
Screen
SPECIAL
Repeatedly
viewing.
Luminance Noise Reduction
-
You
can
select On
This function works in the
following
AV
or
(AV1
or
S-Video
AV2),
G
1024x768
1360x768
1366x768
MENU
Prev.
(option)
Off to reduce the
or
XGA Mode
SCREEN
TWIN
-
config.
adj.
Reset
noise which may appear
picture
on
the
screen
during watching
the TV.
mode:
COMPONENT 480i/576i.
1. Press the MENU button and then
use
button to select the SCREEN
/
Auto
menu.
VIDEO
configure
ARC
Zoom In/Out
2. Press the
button and then
3. Press the
button and then
4.
press the MENU button to return to normal
use
AUDIO
button to select YNR.
/
Position
Manual
use
button to select On
/
or
TIME
Off.
Screen
SPECIAL
Repeatedly
viewing.
-
-
With 2-SPLIT
ZOOM, you
If
enlarged,
a screen
is
-I t 's available to
1.
enlarge
the
with
screen
this function in every
use
MENU
can
only
move
the
a screen can move
ration.
regular
input
source.
into upside or downside.
selecting a section of screen.
screen
without
this function in PIP mode.
use
Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
2-Split
changes
the
screen
4-Split
zoom
1
1
display
as
shown below.
9-Split
zoom
zoom
123
2
456
4
In
case
of
4
FG
9-Split
5
789
FG
the
9-Split
/
or
/
move
the
enlarged
screen
with
button.
In
zoom
FG
Zoom:
Press the number button to select the section you enlarge.
If you choose No.5, the 5 section is enlarged and also can
using
case
of
choosing
the No.5
123
456
789
FG
The 5 section is
22
G
On
Off
Zoom
This is the function to
-I t 's available to
-
YNR
SCREEN
TWIN
Split
config.
adj.
Reset
changed
to
a
full
screen.
Prev.
PIP Function
-
PIP lets you view 2 different
Watching
inputs (sources)
your monitor
on
PIP
screen
PIP
Press the PIP button to switch
on
the sub
Press this button
again
same
Aspect
time.
Ratio
Press the PIP ARC button.
pictures.
?
?
at the
The sub
to switch it off.
picture
appears
as
below.
Component
Av
10:30
4:3
Moving
Swapping
the PIP
Repeatedly press the
position is achieved.
left/right.
Av
Av
Component
10:30
position
Main Picture
D
E
Selecting
Adjustment
Press the ZOOM+/ZOOM- button to
size when
pic-
Component
10:30
FG
Main Picture Size
the main and sub
exchange
tures.
or
/
button until desired
/
The sub picture moves up/down or
Win.
picture
the PIP
Press the SWAP button to
Press the WIN.POSITION button.
main
16:9
viewing
enlarge
or
reduce the
the PIP.
Sub Picture
a source
input signal
for the PIP
Press the SUB INPUT button to select the
sub
input
mode for the
picture.
Component
Av
10:30
Zoom in
100
%
D
FG
E
PIP Size
Main Picture Position
Press the WIN.SIZE button and then
the sub
picture
button to
is
Adjustment
Press the ZOOM+/ZOOM- button.
tion with the
picture mode, main
adjusted simultaneously. With WIN.SIZE
mode, sub picture is adjusted.
picture
adjust
size.
With WIN.SIZE button in twin
PIP
/
/
or
/
Adjust the
buttons in
main
enlarged
picture posimain
picture.
and sub
button in
Zoom in
100
%
D
FG
E
Win. size
23
TWIN Picture
Main Picture Size
Adjustment
Press the TWIN PICTURE button.
?
Each press of TWIN PICTURE button
changes
the
screen
DW1
Sub Picture Size
display
as
DW2
Adjustment
Selecting
sub
button to
a source
for the Twin
picture
Press the SUB INPUT button to select the
Press the WIN.SIZE button.
?
Press the
?
WIN.POSITION function doesn't
/
shown below.
adjust
the sub
picture
size.
picture.
operate in twin picture
Component
mode.
Av
10:30
Win. size
Swapping
the Twin Picture
Press the SWAP button to
ture in twin
picture
exchange
the main and sub
Component
AV
Av
Component
10:30
24
pic-
mode.
10:30
input
mode for the
External Control Device
-
Connect the RS-232C
control the Monitor's
-
-
Connect the serial
input jack to an external
functions externally.
port of the control device
RS-232C connection cables
Type
are
of connector; D-Sub
9-pin
to the RS-232C
supplied
(such
jack
on
as a
computer
or an
the Monitor back
A/V control
system)
Pin
1
No connection
panel.
with the Monitor.
male
name
2
RXD
3
TXD
and
1
No.
5
(Receive data)
(Transmit data)
(DTE side ready)
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
RS-232C
not
Setup
control device
(DCE side ready)
(Ready to send)
(Clear to send)
9
6
configurations
7-wire
(Standard
3-wire
configuration
(Not standard)
configuration
RS-232C cable)
PC
PDP
RXD
2
3
TXD
TXD
3
2
RXD
PC
PDP
RXD
2
3
TXD
3
2
RXD
GND
TXD
GND
5
5
GND
GND
5
5
DTR
4
6
DSR
DTR
4
4
DTR
DSR
DSR
6
4
DTR
DSR
6
6
RTS
7
8
CTS
RTS
7
7
RTS
8
CTS
CTS
8
RTS
7
D-Sub 9
CTS
8
D-Sub 9
D-Sub 9
D-Sub 9
Set ID
-
Use this function to
specify
a
monitor ID number.
1.
Press the MENU button and then
2.
Press the
button and then
use
3.
Press the
button and then
use
/
use
button to select the SPECIAL
menu.
VIDEO
Language
/
button to select Set ID.
AUDIO
Child lock
ISM Method
TIME
F / G button to
adjust
Set ID to choose the desired
Low power
Set ID
SPECIAL
monitor ID number.
G
1
Cinema
OSD Rotate
SCREEN
4.
?
The
range of Set ID is 1
Refer to 'Real data mapping1' (See
adjustment
99.
~
TWIN
p.30).
MENU
Prev.
Communication Parameters
?
Baud rate
?
Data
?
:
115200
length : 8
Parity : None
bits
bps (UART)
?Stopbit:1bit
?
Communication code
:
ASCII code
25
OK Acknowledgement
Command Reference List
COMMAND 1
COMMAND 2
DATA
(Hexadecimal)
01. Power
k
a
0~1
Input Select
Aspect Ratio
k
b
0~4
k
c
0~3
04. Screen mute
k
d
0~1
05. Volume mute
k
e
0~1
06. Volume control
k
f
0~64
07. Contrast
k
g
0~64
02.
03.
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
*
k
h
0~64
The Monitor transmits ACK
(acknowledgement)
k
i
0~64
this format when
abnormal data from
10. Tint
k
j
0~64
non-viable functions
11.
k
k
0~64
12. OSD select
k
l
0~1
13. Remote control lock mode
k
m
0~1
14. PIP/DW Picture
k
n
0~3
01. Power
15. PIP
k
o
0~1
G To control Power On/Off of the Monitor.
k
p
0~99
k
q
0~3
16.
17.
Brightness
Sharpness
Ratio
Aspect
Split Zoom
PIP position
PIP Size Setting for Twin Picture Mode
receiving
communication
or
2
(Command
j
t
0~64
[k][a][ ][Set ID][ ][Data][Cr]
k
r
0~64
Data
20. Bass
k
s
0~64
21. Balance
k
t
0~64
22. Colour
k
u
0~3
23. Red
k
v
0~C8
24. Green
k
w
0~C8
25.
k
temperature
adjustment
adjustment
Blue adjustment
PIP input source
0
:
Ack
[a][ ][Set ID][ ][OK][Data][x]
G To show Power On/Off.
Transmission
0~C8
y
0~4
[k][a][ ][Set ID][ ][FF][Cr]
27. Abnormal Status
k
z
0~a
Ack
28. ISM Method
j
j
j
j
j
30. Orbiter Time
31.
32.
Setting
Orbiter Pixel Setting
Auto configure
Transmission /
Receiving
p
0~3
q
0~1
r
1~FE
s
0~9
u
1
[a][ ][Set ID][ ][OK][Data][x]
*
In like manner, if other functions transmit '0xFF' data
based on this format, Acknowledgement data feed back
presents
02.
Protocol
Input
status about each function.
Select
G To select input
Transmission
You
can
(Command
source
also select
SELECT button
[Command1][Command2][ ][Set ID][ ][Data][Cr]
errors.
1:PowerOn
$
29. Low Power
on
an
2
:
b)
for the Monitor.
input
source
using
the INPUT
the Monitor's remote control.
Transmission
*
*
*
[Command 1]
[Command 2]
[Set ID]
:
k
:
To control PDP set.
[k][b][ ][Set ID][ ][Data][Cr]
:
You
Data
can
adjust the
set ID to choose
desired monitor ID number in
special
previous page.
Adjustment range is 1 99.
When selecting Set ID '0', every
~
connected PDP set is controlled.
*
[DATA]
:
To transmit command data.
Transmit 'FF' data to read status of
command.
*
[Cr]
:
Carriage
Return
ASCII code '0x0D'
*[]
26
:
0
:RGB
3
:
1
:
Component (or AV1)
:AV(orAV2)
4
:DVI
2
menu.
See
ASCII code
'space (0x20)'
on
a)
Power Off
k
26.
:
based
Transmission
19. Treble
18.
on
the data is data write
09. Colour
08.
based
time, if the
Ack
[b][ ][Set ID][ ][OK][Data][x]
S-Video
03.
Ratio
Aspect
G To adjust the
(Command
2
:
c) (Main Picture Size)
format. (Main picture format)
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
You
screen
also
can
SCREEN
menu.
07. Contrast
G To adjust
You
:
Data
1
:
2
:
Wide
also
g)
:
contrast.
adjust
contrast in the PICTURE
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
0
screen
2
[k][g][ ][Set ID][ ][Data][Cr]
Transmission
Data
can
(Command
Min:0~Max:64
*
(16:9)
Normal screen (4:3)
Full screen (Zoom)
screen
Refer to 'Real data
mapping
1'. See page 30.
Ack
[g][ ][Set ID][ ][OK][Data][x]
3:14:9
Ack
08.
[c][ ][Set ID][ ][OK][Data][x]
*
Using
the PC
input,
you select either 16:9
or
4:3
screen
aspect ratio.
Brightness (Command
G To adjust
You
can
2
brightness.
adjust brightness
:
h)
screen
also
in the PICTURE
menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
04. Screen Mute
G To select
screen
(Command
2
Min:0~Max:64
*
d)
:
Refer to 'Real data
mapping
1'. See page 30.
Ack
mute on/off.
[h][ ][Set ID][ ][OK][Data][x]
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data
0
:
Screen mute off
1
:
Screen mute
(Picture on)
(Picture off)
on
09. Colour
(Command
G To adjust the
Ack
You
[d][ ][Set ID][ ][OK][Data][x]
can
also
screen
adjust
2
:
i)
colour.
colour in the PICTURE
menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
05. Volume Mute
(Command
G To control volume
You
can
also
2
:
Data
e)
mute on/off.
adjust
mute
using
Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See page 30.
Ack
the MUTE button
on
remote control.
[i][ ][Set ID][ ][OK][Data][x]
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
0
:
Volume mute
1
:
Volume mute off
10. Tint
(Volume off)
(Volume on)
on
(Command
G To adjust the
You
Ack
can
also
screen
adjust
2
:
j) (NTSC input only)
tint.
tint in the PICTURE
menu.
Transmission
[e][ ][Set ID][ ][OK][Data][x]
[k][j][ ][Set ID][ ][Data][Cr]
06. Volume Control
(Command
2
:
f)
G To adjust volume.
You
on
can
also
adjust
Data
Red:0~Green:64
*
Refer to 'Real data
mapping
1'. See page 30.
Ack
volume with the volume buttons
remote control.
[j][ ][Set ID][ ][OK][Data][x]
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See page 30.
Ack
[f][ ][Set ID][ ][OK][Data][x]
27
11.
Sharpness (Command
G To adjust the
You
can
also
2
15. PIP
k)
:
sharpness.
adjust sharpness in
the PICTURE
You
menu.
can
TWIN
2
:
o)
also
the
adjust
screen
format for PIP in the
menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
[k][o][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
*
(Command
G To select the PIP picture format.
screen
Transmission
Data
Ratio
Aspect
Refer to 'Real data
mapping
1'. See page 30.
Data
0: Normal
1: Wide
Ack
(4:3)
(16:9)
screen
screen
Ack
[k][ ][Set ID][ ][OK][Data][x]
[o][ ][Set ID][ ][OK][Data][x]
12. OSD Select
(Command
2
l)
:
G To select OSD (On Screen Display) on/off when
16.
con-
trolling remotely.
(Command
G To operate split
zoom
2
:
p)
function and select the
split
zoom
section number.
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0
Zoom
Split
:OSDoff
[k][p][ ][Set ID][ ][Data][Cr]
1:OSDon
Data
Ack
Min: 21
[l][ ][Set ID][ ][OK][Data][x]
?
~
Max:99
Data 21:
ex.
Selection 1 of 2
Refer to 'Real data
split
zoom.
2'.
mapping
Ack
13. Remote control lock mode
G
To lock the front
panel
controls
(Command
on
2
:
[p][ ][Set ID][ ][OK][Data][x]
m)
the monitor and remote
Real data
*
control.
0
Transmission
Reset
:
split
zoom
21: Selection 1 of 2
[k][m][ ][Set ID][ ][Data][Cr]
Data
0
:
1:Lockon
you're
not
using
the remote
When main power is
released.
99: Selection 9 of 9
split
zoom
44: Selection 4 of 4
14. PIP / Twin
45: Selection 5 of 4
control,
use
this mode.
You
can
(DW) (Command
2
also control the PIP/TWIN
TWIN PICTURE button
TWIN
on
menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
0: PIP/DW off
:
n)
17. PIP Position
picture using
the remote control
the
zoom
zoom
zoom
zoom
zoom
or
PIP,
in the
(Command
You
can
also
adjust
the sub
WIN.POSITION button
on
:
q)
picture position using
the remote control
menu.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data
down
0
:
Right
1
:
Left down
3: DW2
2
:
Left up
3
:
Right
Ack
[n][ ][Set ID][ ][OK][Data][x]
2
G To select sub picture position for PIP.
2: DW1
1: PIP
on screen
on screen
on screen
up
on screen
Ack
[q][ ][Set ID][ ][OK][Data][x]
28
zoom
on/off, external control lock is
G To control the PIP (Picture In picture)/Twin picture.
Data
91: Selection 1 of 9
42: Selection 2 of 4
[m][ ][Set ID][ ][OK][Data][x]
If
zoom
41: Selection 1 of 4
Ack
*
split
split
split
split
split
split
split
24: Selection 4 of 2
Lock off
2
mapping
or
in the TWIN
18. PIP Size
for Twin Picture Mode
Setting
(Command2 : t)
23. Red
also
can
WIN.SIZE
on
select the
PIP
picture
format
using
the remote control.
the
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data
Transmission
Min:0~Max:C8
Refer to 'Real data
*
[k][t][ ][Set ID][ ][Data][Cr]
Data
mapping
3'. See page 30.
Ack
Min:0~Max:64
*
v)
:
G To adjust red in colour temperature.
G To select the PIP picture format.
You
2
Adjustment (Command
Refer to 'Real data
mapping
1'. See page 30.
[v][ ][Set ID][ ][OK][Data][x]
Ack
[to][ ][Set ID][ ][OK][Data][x]
19. Treble
(Command
2
24. Green
:r)
can
also
adjust
treble in the SOUND
menu.
[k][w][ ][Set ID][ ][Data][Cr]
[k][r][ ][Set ID][ ][Data][Cr]
Data
Refer to 'Real data
Min:0~Max:C8
*
Min:0~Max:64
*
w)
Transmission
Transmission
Data
:
G To adjust green in colour temperature.
G To adjust treble.
You
2
Adjustment (Command
mapping
1'. See page 30.
Refer to 'Real data
mapping
3'. See page 30.
Ack
[w][ ][Set ID][ ][OK][Data][x]
Ack
[r][ ][Set ID][ ][OK][Data][x]
25. Blue
20. Bass
(Command
2
:
s)
G To adjust bass.
You
can
also
bass in the SOUND
menu.
$)
[k][$][ ][Set ID][ ][Data][Cr]
Data
[k][s][ ][Set ID][ ][Data][Cr]
Refer to 'Real data
Min:0~Max:C8
*
Min:0~Max:64
*
:
Transmission
adjust
Transmission
Data
2
Adjustment (Command
G To adjust blue in colour temperature.
Refer to 'Real data
mapping
3'. See page 30.
Ack
mapping
1'. See page 30.
[$][ ][Set ID][ ][OK][Data][x]
Ack
[s][ ][Set ID][ ][OK][Data][x]
21. Balance
(Command
26. PIP
2
:
G
t)
can
also
adjust
menu.
(Command
source
can
y)
:
for sub
also
picture in PIP/Twin picadjust input source for sub
PIP INPUT button
on
remote control.
Transmission
Data
Min:0~Max:64
Refer to 'Real data
mapping
1'. See page 30.
0
:RGB
3
:
1
:
Component (or AV1)
:AV(orAV2)
4
:DVI
2
Ack
Ack
[t][ ][Set ID][ ][OK][Data][x]
[y][ ][Set ID][ ][OK][Data][x]
22. Colour
2
[k][y][ ][Set ID][ ][Data][Cr]
[k][t][ ][Set ID][ ][Data][Cr]
*
input
picture using
balance in the SOUND
Transmission
Data
To select
Select
ture mode. You
G To adjust balance.
You
Input
Temperature (Command
2
:
S-Video
u)
G To adjust colour temperature.
You
can
also
adjust
CSM in the PICTURE
menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data
0: Normal
1: Cool
2: Warm
3: User
Ack
[u][ ][Set ID][ ][OK][Data][x]
29
27. Abnormal State
G To recognize
(Command
2
:
30. Orbiter Time
z)
(Command
abnormal state.
an
0: Normal
[j][r][ ][Set ID][ ][Data][Cr]
1: No
Data
2:
3:
4:
(Power on and signal exist)
signal (Power on)
Turn the monitor off by remote control
Turn the monitor off by sleep time function
Turn the monitor off by RS-232C function
Min: 1
?
:
r)
term.
~
Max: FE
Refer to 'Real data
mapping
1'. See page 30.
Ack
5: 5V down
[r][ ][Set ID][ ][OK][Data][x]
6: AC down
7: Turn the monitor off
8: Turn the monitor off
9: Turn the monitor off
a:
2
Transmission
[k][z][ ][Set ID][ ][FF][ ][Cr]
Turn the monitor off
by
by
by
by
Fan Alarm function
off time function
auto off function
31. Orbiter Pixel
AV board detect
(Command
Ack
This function is "read
1
Setting
: j, Command
2
:
s)
G To adjust pixel number in orbiter function.
[z][ ][Set ID][ ][OK][Data][x]
*
Setting
: j, Command
G To adjust orbiter operation time
Transmission
Data
1
Transmission
only".
[j][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:9
?
28. ISM Method
(Command
1
:
j,
Command 2
G To control the ISM method. You
Method in SPECIAL
:
p)
also
can
adjust
ISM
mapping
1'. See page 30.
[s][ ][Set ID][ ][OK][Data][x]
menu.
Transmission
32. Auto
configure
(Command 1 : j,
[j][p][ ][Set ID][ ][Data][Cr]
Data
Refer to 'Real data
Ack
0
:
Normal Mode
2
:
Orbiter
1
:
White Wash
3
:
Inversion
Ack
Command 2
:
u)
G To adjust picture position and minimize image shaking
automatically.
It works
only
in RGB
(PC)
mode.
Transmission
[p][ ][Set ID][ ][OK][Data][x]
[j][u][ ][Set ID][ ][Data][Cr]
Data
1: To Set
Ack
29. Low Power
(Command
1
:
j,
Command 2
:
q)
[u][ ][Set ID][ ][OK][Data][x]
G To reduce the power consumption of the monitor. You
can
also
adjust
Low Power in SPECIAL
menu.
Transmission
[j][q][ ][Set ID][ ][Data][ ][Cr]
Data
0
:Off
1
:On
*
Real data
mapping
1
*
Real data
0
:Step0
A
:Step10(SetID10)
A:-18
F
:Step15(SetID15)
:Step16(SetID16)
5F: -1
mapping
0:-20
5:-19
Ack
[q][ ][Set ID][ ][OK][Data][x]
10
64: 0
69: +1
64
30
:
Step
100
C3:
+19
C8:
+20
3
IR Code
(NEC Format)
How to connect
G
Connect your wired remote control to the Remote port on the Monitor.
can make the wired remote control manually by referring the IR Code
You
Remote Control IR Code
(NEC Format).
(NEC Format)
G Output waveform
Single pulse,
modulated with 37.917KHz
at 455KHz
signal
TC
Carrier
frequency
FCAR
1/TC
Duty
T1
=
ratio
=
fOSC/12
=
T1/TC
1/3
=
G Configuration of frame
?
1st frame
Lead
Low
High
code
custom code
custom code
Data code
Data code
C0 C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?
Repeat
frame
Repeat
code
Tf
G Lead code
9ms
4.5
ms
0.55
G Repeat code
ms
9ms
2.25
ms
G Bit description
?
Bit "0"
?
0.56
0.56
1.12
G Frame interval
:
Bit "1"
ms
ms
2.24
ms
ms
Tf
The waveform is transmitted
Tf
as
long
as a
key
is
depressed.
Tf
Tf=108ms @455KHz
31
Code
Note
00H
UP
(D)
R/C Button
01H
DOWN
(E)
VOL+ (G)
VOL- (F)
R/C Button
08H
POWER
R/C Button
C4H
POWER ON
Discrete IR Code
C5H
POWER OFF
Discrete IR
09H
MUTE
R/C Button
10H
Number
11H
Number
12H
Number
13H
Number
14H
Number
15H
Number
16H
Number
17H
Number
18H
Number
19H
Number
0BH
INPUT SELECT
R/C Button
98H
MULTIMEDIA
R/C Button
BFH
COMPONENT
Discrete
C6H
DVI
Discrete
D5H
RGB
Discrete
5AH
AV
Discrete
D8H
S-VIDEO
Discrete
0EH
SLEEP
R/C Button
43H
MENU
40H
ZOOM
41H
ZOOM
44H
OK( )
R/C Button
4DH
PSM
R/C Button
52H
SSM
R/C Button
60H
PIP
R/C Button
61H
PIP INPUT
R/C Button
63H
SWAP
R/C Button
68H
TWIN PICTURE
R/C Button
69H
WIN.SIZE
R/C Button
6AH
WIN.POSITION
R/C Button
7BH
SPLIT ZOOM
R/C Button
79H
ARC
R/C Button
76H
ARC
02H
03H
32
Function
(Hexa)
77H
ARC
AFH
ARC
99H
Auto
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
R/C Button
R/C Button
0
R/C Button
1
R/C Button
2
R/C Button
3
R/C Button
4
R/C Button
5
R/C Button
6
R/C Button
7
R/C Button
8
R/C Button
9
R/C Button
(Power On/Off)
(Only Power On)
Code (Only Power Off)
(Input COMPONENT, RGB or
(Input COMPONENT Selection)
(Input DVI Selection)
(Input RGB Selection)
(Input AV Selection)
(Input S-VIDEO Selection)
R/C Button
+
-
(4:3)
(16:9)
(Zoom)
configure
R/C Button
R/C Button
(4:3/16:9 Mode Selection)
(Only 4:3 mode)
Code (Only 16:9 mode)
Code (Only Zoom mode)
Code (Only RGB (PC) mode)
Discrete IR Code
Discrete IR
Discrete IR
Discrete IR
DVI
Selection)
Notes
33
check list
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
on.
No sound
?
Plug
another
power cord
product's
was
power cord into the wall outlet where the Monitor's
plugged
in.
?
Press the VOLUME
?
Sound muted? Press MUTE button.
?
Check to
(G)
button.
Picture OK &
No sound
if there is any
see
remote control
The remote control
?
doesn't work
?
?
Picture appears slowly,
after switching on
Check to
to
Install
new
or
Poor colour
Poor
and the
installed with the correct
are
polarities.
as
the
(Refer
to
image
is muted
p.11)
during
the
startup process of the moni-
centre, if the picture has not appeared after
Select Colour in the VIDEO
to
menu
(G)
button.
certain distance between the Monitor and the VCR.
?
Keep
?
Activate any function to restore the
a
and press the VOLUME
p.15)
picture
Horizontal/vertical bars
No
Display
five minutes.
on
or
batteries.
This is normal
(Refer
or
between the Plasma
p.11)
tor. Please contact your service
?
No
object
obstruction.
if the batteries
see
(Refer
causing
the
screen
for
more
than 5
brightness
minutes, the
?
Check for local interference such
?
Adjust
?
A
as an
electrical
picture shaking
output from
one
of the
Balance in the AUDIO
menu.
of the
screen
(Refer
to
picture. (If
still
picture
is
gets dark.)
appliance
or
power tool.
p.16)
speakers
Unusual sound from
inside the monitor
34
change
in ambient
at the time of
humidity or temperature may result in an unusual noise
switching off or on of the monitor and does not indicate a fault
with the monitor.
Product
specifications
MT-60PZ90V/A/B/K/R/S
MODEL
MT-60PZ90M/A/B/K/R/S
MZ-60PZ92V/A/B/K/R/S
MT-60PZ92V/A/B/K/R/S
MZ-60PZ92M/A/B/K/R/S
MT-60PZ92M/A/B/K/R/S
Width
(inches
/
mm)
56.9 / 1455
Height (inches
/
mm)
34.8 / 883
Depth (inches
/
mm)
3.9/99
Weight (pounds
Power
/
144 / 65.3
kg)
AC100-240V, 50/60Hz
requirement
Resolution
1366
Colour
32
specifications
shown above may be
(Dot)
~
104°F
(0
40°C)
~
Less than 80%
Operating Humidity Range
The
768
16,770,000 (256 steps of each R, G and B)
Operating Temperature Range
?
x
changed
without notice for
quality improvement.
35
Download PDF