LG | RT-29CC25V | LG RT-29CC25V Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number, serial number and manufactured
of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Model number
:
RT-29FD15VE / CT-29M35V / CT-25Q25VE
RT-29FA35VE / RT-29FB75VE / CT-25H35VE
RT-29CC25V
Serial number :
Manufactured :
For informations of Guarantee and Service Center / Parts,
please refer to your Warranty Card.
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic
8
operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function
On
On
screen
language
selection
(option)
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Programme edit
Favourite programme
Calling the programme table
Setting
10
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option) / Picture format
16
Sound
19
adjustment
SSM (Sound Status Memory) /
Turbo sound selection (option)
Sound
NICAM
Sound
adjustment
output selection / Stereo/Dual reception
reception (option)
Time
setting
Setting the
Auto sleep
22
clock /
Setting
the On/Off timer
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Blue back (option) / Tilt (option)
Degaussing (option) / Games (option) / Sleep timer
23
PIP
26
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
27
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
S-video/Audio in sockets (S-AV) (option)
Component in sockets (option)
Headphone socket (option)
30
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Troubleshooting
2
check list
Back
cover
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Do not
cause
of the set, this may
place anything containing liquid on top
a fire or could give an electric shock.
Service
Never
remove
the back
high voltage
properly, unplug it
very
of the set
this
expose you to
and other hazards. If the set does not operate
cover
as
can
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation
openings
on
the back
cover.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
POWER
MUTE
11
1
1
2
3
4
5
6
Remote control handset
Before you use the remote control
teries. See the next page.
2
1.
7
ARC
8
9
0
TV/AV
PICTURE
MENU
12 2.
3
SOUND
4
13
OK
TURBO
VOL
5
VOL
6
PLAY
P/STILL
7
FF
I/II
SSM
PIP
FAVOURITE
NUMBER BUTTONS
switches the set on from
standby
or
directly
TURBO PICTURE / SOUND BUTTON
selects Turbo picture / sound.
5.
D / E
standby.
select
a
number.
(Aspect Ratio Control)
changes the picture format.
(Programme Up/Down)
adjusts
LIST
15
SLEEP
off to
selects a programme or a menu item.
switches the set on from standby.
F / G
(Volume Up/Down)
adjusts the volume.
8
PSM
or
4.
REC
STOP
standby
ARC
PR
REW
from
on
3.
14
PR
POWER
switches the set
handset, please install the bat-
EYE/
16 6.
9
17
Q.VIEW
menu
settings.
VCR BUTTONS (option)
control a LG video cassette recorder.
18
TEXT
10
19 7.
MIX
TIME
REVEAL
? MODE
SIZE
STILL
POSITION
9/4 PIP
PR
PR
SWAP
M
8.
i
INPUT
20
9.
(With
TELETEXT /
FAVOURITE
SSM (Sound Status Memory)
recalls your preferred sound setting.
I/II (option)
selects the language during dual
selects the sound output.
PSM (Picture Status
recalls your preferred
language
broadcast
Memory)
picture setting.
10. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PIP)
11. MUTE
switches the sound
Q.VIEW
TEXT
on or
off.
10
MIX
TIME
REVEAL
? MODE
SIZE
HOLD
UPDATE
INDEX
12. TV/AV
selects TV or AV mode.
switches the set on from
M
i
13. MENU
selects
standby.
a menu.
14. OK
(With
4
TELETEXT / Without
PIP)
accepts your selection
or
displays
the current mode.
(option).
Location and function of controls
15. LIST
displays
16. EYE/*
the programme table.
(option)
switches the eye function
on or
POWER
off.
11
1
17. SLEEP
sets the
sleep
18. Q.VIEW
returns to the
a
previously
2
3
4
5
6
7
8
9
0
TV/AV
2
viewed programme.
ARC
12
3
favorite programme.
20. PIP BUTTONS
SOUND
PICTURE
(option)
13
TURBO
switches the sub
PR +/selects
a
picture
on or
14
PR
picture.
6
the sub
mode for the sub
picture
picture.
size.
STILL
freezes motion of the sub
PLAY
FF
P/STILL
STOP
REC
I/II
SSM
or
picture
LIST
15
8
PSM
picture.
SLEEP
EYE/
16
9
FAVOURITE
relocates the sub
9/4 PIP
on
REW
7
POSITION
switches
VOL
PR
INPUT
adjusts
VOL
5
picture.
SWAP
alternates between main and sub
input
OK
off.
programme for the sub
selects the
SIZE
MENU
4
PIP
sub
1
timer.
19. FAVOURITE
selects
MUTE
17
Q.VIEW
in clockwise direction.
off the programme
scan
mode
18
19
through
4
or
9
pictures.
COLOURED BUTTONS
These buttons are used for teletext
programme edit.
Battery
(only
TELETEXT
models)
or
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
(Without
PIP
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without
TELETEXT /
FAVOURITE
SIZE
STILL
PR
PR
PIP)
Q.VIEW
POSITION
9/4 PIP
SWAP
INPUT
TELETEXT / With
20
PIP)
5
Location and function of controls
Front
panel
CF/CT-25/29Q25 series
1.
ON/OFF
12
MENU
S-VIDEOL/MN
13
1
VOL
34
5
MENU
on or
off.
PR
OK
VOL
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
standby mode.
dims when the set is switched on.
3.
MENU
selects
11
26
RF/RT-28/32FZ15 series
AUDIO
R
OK
MAIN POWER
switches the set
PR
a menu.
ON/OFF
AV3
4.
OK
accepts your selection
or
current mode.
12 6
5
5.
VIDEO
AV3
MENU
OK
VOL
PR
L
AV3
VIDEO(L/MONO) AUDIO
D / E
the
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G
(Volume Down/Up)
adjusts the volume.
CF/CT-25/29H35 series
S-VIDEO
13
3 4
displays
(R)
ON/OFF
adjusts
(L/MONO)
menu
settings.
R
AUDIO
1
12
26345
6.
REMOTE CONTROL SENSOR
Note : Only use the supplied remote
control handset. (When you use others, they'll be not able to function.)
7.
TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
1311
RF/RT-25/29FB35 series
ON/OFF
MENU
OK
VOL
PR
VIDEO L/MONO AUDIO R
AV3
12
13
S-VIDEOL/MN
8.
1312
126345
selects volume, EYE (option), picture
items or brief auto programme while the
RF/RT-25/29FB95 series
menus
AUDIO
R
(Function)
9.
AV3
not
display.
+/-
(D/E)
adjusts the
function
gramme.
switches the set
12634
5
11
AV3
RF/RT-25/29CC25 series
12
MENU
OK
VOL
PR
VIDEOL/MN
CF/CT-25/29K35 series
ON/OFF
PR
AV3
12
126789
VIDEOL/MN
13 12
11
RF/RT-25/29FA35 series
AUDIO
MENU
OK
VOL
the
sur-
this
PR
(option)
Connect the video out socket of an
S-VIDEO VCR to the S-VIDEO socket.
Connect the audio out sockets of the
S-VIDEO VCR to the audio sockets
as in AV3.
ON/OFF
R
Note
AV3
1
6
to
13. AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of
external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
VIDEO L/MONO AUDIO R
TV/AV
13
10. TURBO SOUND / PICTURE (option)
switches Turbo sound or Turbo picture
function on or off.
12. HEADPHONE SOCKET (option)
Connect the headphone plug to
socket.
R
VOL
pro-
standby.
(option)
adjusts picture according
rounding conditions.
1264
35
AUDIO
from
a
11. EYE
ON/OFF
13
on
selects
or
234
5
6
12 13
11
:
Do not
(over 4Kg)
place
on
series models.
any heavy objects
the RF/RT-25/29FA35
Location and function of controls
RF/RT-25/29FB55 series
RF/RT-25/29FA55 series
VIDEO
12
MENU
MENU
VOL
PR
OK
OK
VOL
L
AUDIO
R
PR
ON/OFF
A
S-VIDEOL/MN
13
1
3
5
4 2 6
1
11
2634
11
513 12
RF/RT-25/29FB75 series
CF/CT-25/29M35 series
AUDIO
TV/AV
R
AV3
ON/OFF
VOL
PR
126
126789
12
345
CF/CT-25/29M65 series
CF/CT-25/29Q45 series
345
AV3
MENU
VIDEO
OK
VOL
ON/OFF
PR
VOL
L
13
MONO
AUDIO
R
3
1
5
4 26
11
26
1
RF/RT-25/29FD15/16/40 series
12
MENU
RF/RT-28/32FZ85 series
OK
PR
VOL
S-VIDEO
OK
MENU
126
L/MON
AUDIO
VO
ON/OFF
VIDEO
13
11
3
4
5
26
1
RF/RT-29FE60/61 series
4
PR
35
CF/CT-25/29K95 series
R
AV3
AV3
12
13
126
3 4
126
5
CF/CT-25/29Q95 series
S-VIDEOL/MN
RF/RT-25/29FA65 series
MENU
VOL
MENU
SOUND
PR
VOL
OK
TURBO
ON/OFF
O
AUDIO
789
PR
PICTURE
3 41011
5
126
3
1
8
426
5
R
RF/RT-25/29FD60/61 series
MEN U
AV3
12
12
13
S-VIDEOL/MN
AUDIO
12
3
13
13
13
OK
S-VIDEOL/MN
4
PR
ON/OFF
1
6
AUDIO
PR
R
AV3
5
2
11
VOL
R
7
Basic
operation
On and off
1.
2.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV
or NUMBER buttons on the remote control handset to switch it
on
3.
fully.
Press the POWER button
The set reverts to
4.
POWER
MUTE
standby
3
4
5
6
Programme
selection
7
8
9
You
a
0
TV/AV
OK
PR
VOL
VOL
again
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
2
MENU
mode.
Press the main power button
1
SOUND
the remote control handset.
on
can
select
programme number with the D / E
or
NUMBER
buttons.
Volume
adjustment
Press the F / G button to
the volume.
adjust
Quick view
Press the Q.VIEW button to view the last programme you
PR
were
watching.
Mute function
Press the MUTE button. The sound is switched off and the
I/II
display
W
SSM
appears.
You can cancel it
by pressing
the
MUTE,
F /
G, SSM, I/II (option),
TURBO SOUND button.
Q.VIEW
On
The
screen
menu
language
can
First select your
1.
selection
be
displayed
language.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
Special
menu.
2.
Press the G button to select
3.
Press the G button and then D / E button to select your desired
Language.
language.
All the
4.
will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
on screen
viewing.
8
displays
On
screen menus
The
dialogue between you and your set takes place on screen with
an operator menu. The buttons required for the operating steps are
also displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down
menu.
4.
Change
the
setting
of
an
item in the sub
F/GorD/E.
You
to
can move
move
to the
higher
to the lower level
level
menu
or
pull-down
menu
with
with OK or F button and
press the G button.
menu
Note :
In the teletext mode, menus are not displayed.
a.
In some models, the Normal/Turbo search will not display,
b.
only the Start will display in the Auto programme menu.
In some models, Tilt, Game, Booster or Degauss will not disc.
d.
play.
In
some
models, the Language will
not
display.
Auto programme
Station
{
BG
{
System
StorageOfrom
{
I
{
NormalOsearch
{
DK
{
TurboOsearch
{
M
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
MENU
OK
()O}{OOKOMENU
PR
()O}{O OKOMENU
Station
VOL
VOL
menu
PR
Manual programme
Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{OOKOMENU
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
{
()O}{OOKOMENU
Picture
menu
Programme
Sound
edit
SSM
{
O0OOCO03 OOO5OOSO69
AVL
{
O1OOCO03OOO6OOSO17
DBS
{
O2OOCO12OOO7OOSO22
Balance
{
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
()O}{O OKOMENU
Sound
menu
Time
Clock
{
Offotime
Onotime
{
Autoosleep
{
{
()O}{OOKOMENU
Time
menu
Special
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
Setting
Station
numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Up
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV
stations
up
to 100 TV stations
Note
:
In
be stored.
tuning
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
2
can
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
1
by programme
models up to 200 TV stations
some
Auto programme
()O}{O OKOMENU
be stored
can
Press the G button to
3
display
the Auto programme
menu.
Auto programme
4
7
5
8
6
9
System
StorageOfrom
{
BG
{
I
NormalOsearch
{
DK
TurboOsearch
{
M
0
MENU
OK
()O}{OOKOMENU
4.
PR
VOL
VOL
PR
5.
6.
7.
8.
9.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
select Start.
Note :
a.
Turbo search is faster than Normal search and in some
models, these searches will automatically store all receivable
stations.
If the programmed station has poor quality sound, select the
b.
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
All receivable stations are stored.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
{
OOCO01O(BG)
7
MENU
System
StorageOfrom
{
NormalOsearch
{
TurboOsearch
{
36%
{
OOCO01O(BG)
7
36%
MENU
(Normal search)
(Turbo search)
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Repeatedly press the MENU button to return to normal TV
viewing.
10
Setting
Manual programme
TV
stations
up
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
Press the MENU button to select the Station menu.
Press the G button and then D / E button to select Manual
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
programme.
3.
Press the
G
button to
display
the Manual programme
menu.
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
2
{
1
2
3
4
5
6
7
8
9
()O}{OOKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
0
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it,
i.e. '05' (or '005') for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
MENU
OK
PR
VOL
VOL
PR
Manual programme
Storage
System
{
Channel
{
Search
{
Name
{
Booster
{
{
{{{
Stored
16. To store another
17.
Repeatedly
viewing.
station, repeat steps
4 to 15.
press the MENU button to return to normal TV
11
TV
stations
up
Setting
Station
AutoOprogramme
ManualOprogramme
{
{
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
ProgrammeOedit
FavouriteOprogramme
{
2.
Press the D / E button to select Name.
3.
Press the G button
4.
Press the D button. You
{
and the
()O}{O OKOMENU
alphabet
on
the Name
can use a
5.
6.
your choice of the second
Press the OK button.
Repeatedly
viewing.
can
In
models, Booster is
can
+, -, the numeric 0 to 9
opposite
direction.
the F / G button and then take
character, and
so on.
press the MENU button to return to normal TV
(option)
Booster
select in the
pressing
Booster
some
blank,
menu.
A to Z.
With the E button you
Select the position by
7.
pull-down
1 to 3.
perform
an
optional
function.
Only
a
set with
this function.
MENU
If the
OK
is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
reception
Booster to On.
PR
VOL
VOL
PR
2.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Booster.
3.
Press the G button.
4.
Press the D / E button to select On
1
Repeat
down
12
or
Off
on
the Booster
pull-
menu.
5.
Press the OK button.
6.
Repeatedly
viewing.
press the MENU button to return to normal TV
Setting
Programme
TV
stations
up
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the G button and then D
button to select
/ E
Programme edit.
Press the G button to display the Programme edit menu.
Programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
()O}{OOKOMENU
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
1
2
3
4
5
6
7
8
9
O4OOSO67OOO9OOCO11
DeleteOOOCopy
MoveOOOOOSkip
()}{OOKOMENU
Deleting
1.
2.
a
programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
a
MENU
a
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
PR
or
F / G button.
VOL
VOL
PR
one
position.
programme
F / G button.
2.
Select a programme to be moved with the D / E
Press the YELLOW button.
3.
Move the programme to the desired programme number with
1.
0
or
theD/EorF/Gbutton.
4.
Press the YELLOW button
Programme
again
to release this function.
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{OOMENU
Skipping
programme number
programme number to be
a
1.
Select a
button.
2.
Press the BLUE button. The
3.
skipped with
the D / E
or
F / G
skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons
or
Repeatedly
select it in the programme edit
or
table
menu.
press the MENU button to return to normal TV
viewing.
13
Setting
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
TV
stations
up
Favourite programme
{
{
This function lets you select your favorite programmes
directly.
1.
Press the MENU button to select the Station
2.
Press the G button and then D / E button to select Favourite
()O}{O OKOMENU
menu.
programme.
3.
Press the G button to
display the Favourite programme
menu.
Favourite programme
1
2
3
4
5
6
7
8
9
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
56n Ca 05
{
}{O0_9O()OOKOMENU
0
4.
MENU
5.
6.
To store another programme, repeat
You can store up to 8 programmes.
7.
Press the OK button.
8.
Repeatedly
viewing.
PR
VOL
PR
--
buttons. Any number under 10 is entered with
front of it, i.e. '05' for 5.
OK
VOL
Press the D / E button to select
-----.
Select a desired programme with the F / G button
Repeatedly
FAVOURITE
14
4 to 5.
press the MENU button to return to normal TV
press the FAVOURITE button to select stored favourite
programmes.
LIST
steps
a
NUMBER
numeric '0' in
or
Setting
the programme table
Calling
You
TV
stations
up
check the programmes stored in the memory
the programme table.
can
programme table
Press the LIST button to display the
by displaying
Displaying
Programme
The programme table appears on the screen.
table contains ten programmes as below.
Programme
table
menu.
One programme
edit
OOOOCO01 OOO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
()}{OOKOMENUOOLIST
Note
a.
:
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b.
OK
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
VOL
programme in the programme table
programme with the D / E or F / G button.
Selecting
Select
a
a
PR
Then press the OK button.
The set switches to the chosen programme number.
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
LIST
FAVOURITE
Press the LIST button to return to normal TV
viewing.
15
Picture
Picture
adjustment
Note: Picture
PSM
{
Contrast
{
Brightness
{
Colour
{
Sharpness
{
()O}{O OKOMENU
menu
options
PSM (Picture Status
are
not available for RGB
input source.
Memory)
1.
Press the MENU button and then D / E button to select the
Picture menu.
2.
Press the G button to select PSM.
Press the G button and then D / E button to select
setting on the PSM pull-down menu.
3.
a
picture
Picture
PSM
{
Dynamic
Contrast
{
Standard
Brightness
{
Mild
Colour
{
Game
Sharpness
{
User
()O}OOKOMENU
MENU
4.
Press the OK
5.
Repeatedly
viewing.
or
F button.
press the MENU button to return to normal TV
OK
You
PR
VOL
VOL
PR
can
for
desired
good picture reproduction
You
picture (Dynamic, Standard,
1.
2.
at the
factory
and cannot be
changed.
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC input only) to the levels you prefer.
can
ness
FAVOURITE
a
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
Picture
PSM
also recall
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Picture
PSM
Contrast
{
Brightness
{
Colour
{
Sharpness
{
{
100
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
adjustments on the each sub menu.
Contrast
appropriate
80
}{O()OOKOMENU
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
16
Picture
adjustment
Eye (option)
Eye
is
an
optional
function.
Only
a
set with eye
option
can
perform
this function.
In
automatically adjust the picture according to the surrounding conditions. This will enable you to enjoy the
most suitable picture according to the surroundings.
some
models, the
set will
Press the EYE/* button to switch the eye function
on or
off.
Off
ARC
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
ously
but
condition
Note
a.
b.
display
the display
changes.
in green does not appear continuin yellow appears each time the picture
PICTURE
TURBO
:
If you press the PSM or TURBO PICTURE button with the eye
function, the eye function is automatically switched off.
EYE function is not available for RGB input source.
Turbo
picture
selection
(option)
EYE/
When this function is on, the
tinct than normal picture.
Repeatedly
will be
more
brilliant and dis-
press the TURBO PICTURE button to switch
(Turbo Picture off)
Note
picture
on or
off.
(Turbo Picture on)
:
a.
If you press the PSM button with the Turbo picture function, the
Turbo picture function is automatically switched off.
b.
TURBO PICTURE function is not available for RGB input
source.
17
Picture
adjustment
Picture format
You
(Wide),
In
watch TV
Zoom.
can
in
various
picture formats; Standard,
16:9
models, you can watch TV in various picture formats; Auto,
4:3, 16:9, 14:9 and Zoom.
some
Repeatedly
press the ARC button to select your desired
format.
picture
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Standard (or 4:3)
This picture format is 4 to 3 of
general
TV.
16:9
You can
ARC
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with D / E button.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost. (In some models, you can move the screen up or down
with D / E button.)
Note : In the 1/2 size sub
not available.
18
picture of PIP mode the picture format is
Sound
SSM
You
Sound
(Sound Status Memory)
can
Speech
1.
adjustment
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer.
Press the MENU button and then D / E
Sound
{
AVL
{
DBS
{
Balance
{
button to select the
()O}{O OKOMENU
menu.
2.
Press the G button to select SSM.
3.
Press the G button and then D / E button to select
ting
SSM
the SSM
on
pull-down
a
sound set-
menu.
Sound
SSM
{
Flat
AVL
{
DBS
{
Music
Movie
Balance
{
Speech
User
{
()O}OOKOMENU
Sound
Frequency Adjustment
Press the G button in User to
a.
MENU
SOUND
display
the User sub
menu.
TURBO
OK
PR
VOL
VOL
PR
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENU
b. Select
Make
c.
a
sound band
appropriate
by pressing
the F / G button.
sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly
You
can
press the MENU button to return to normal TV
also
recall
a
desired
sound
SSM
viewing.
(Flat, Music, Movie,
Speech or User) with SSM button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically
Note
:
though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
appears
even
19
Sound
Sound
SSM
{
AVL
{
DBS
{
Balance
{
adjustment
Sound
adjustment
You
adjust balance,
AVL (Auto Volume Leveler), DBS or headphone volume/sound. AVL automatically keeps on an equal volume
level even if you change programmes. If you switch DBS to on, the
set creates a dynamic bass sound. The Turbo sound creates an all
around sound as in a concert hall.
can
()O}{OOKOMENU
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL ,DBS or Balance.
Make desired adjustment with the F / G, D / E or OK button
on each pull-down menu.
1.
2.
3.
Sound
SSM
{
AVL
{
DBS
{
Balance
{
OOO0
ARC
MENU
SOUND
}{O OKOMENU
TURBO
OK
Press the OK button.
Repeatedly press the MENU button to return to normal TV
4.
5.
viewing.
PR
VOL
VOL
PR
Turbo sound selection (option)
When this function is on, the sound will be more emphasized and
amplified than normal sound.
Repeatedly press the TURBO SOUND button to switch on or off.
I/II
SSM
(Turbo
Sound
off)
(Turbo
Sound
on)
Sound output selection
In AV
mode, you
speakers.
can
select
output sound for the left and right loud-
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
L+L
R+R
20
:
:
:
speaker.
Audio signal from audio L input is sent to left and right loudspeakers.
Audio signal from audio R input is sent to left and right
loud-speakers.
Sound
Stereo/Dual
When
adjustment
reception
programme is selected, the sound information for the station appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Mono sound selection
In stereo reception if the stereo
by pressing the I/II button twice.
of sound is improved. To switch back
ton twice again.
mono
is
signal
Display
weak, you
can
switch to
In
mono
to
stereo, press the I/II but-
reception
the
depth
for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped
high quality NICAM
Multiplex) digital sound
with the receiver for NICAM reception, the
(Near Instantaneous Companding Audio
can
I/II
be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
When
NICAM mono is
MONO or FM MONO.
received, you
can
2.
When
received, you
can
3.
STEREO or FM MONO. If the stereo signal
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
NICAM stereo
is
select
NICAM
select NICAM
is weak, switch to
21
Time
Setting the
T ime
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
1.
{
2.
3.
Setting
clock
Press the MENU button and then D / E button to select the
Time menu.
Press the G button to select Clock.
Press the G button and then D / E button to adjust the hour.
T ime
()O}{O OKOMENU
2
3
4
5
6
4.
9
5.
6.
8
MENU
Offotime
Onotime
{
Autoosleep
{
-i-o:o-i-
{
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV viewing.
Setting the
0
{
()O}{OOKOMENU
1
7
Clock
On/Off timer
this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
By using
OK
1.
PR
VOL
VOL
2.
PR
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
T ime
Clock
{
Offotime
Onotime
{
{
-i-o:o-i-
Autoosleep
{
Pr
01
Vol.30
Off
()O}{O OKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK.
Repeatedly press the MENU button to return to normal TV viewing.
Note :
a.
On time works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset
Auto
.
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
22
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto sleep.
Press the G button and then D / E button to select On or Off on
the Auto sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV viewing.
Other functions
TV and AV modes
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
Language
Input
{
Childolock
{
Blueoback
{
Tilt
{
Degauss
{
Game
{
{
button to select the
()O}{O OKOMENU
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1, AV2,
AV3, S-VIDEO (option) or COMPONENT (option) on the Input
pull-down
menu.
Special
Language
Input
{
{
TV
Childolock
{
AV1
Blueoback
{
AV2
Tilt
{
AV3
Degauss
{
S_VIDEO
Game
{
COMPONENT
1
2
3
4
5
6
7
8
9
0
TV/AV
()O}OOKOMENU
4.
AV1 : VCR connected to the Euro scart socket or phone jack of
the set
AV2 : VCR connected to the AV2 sockets of the set
AV3 : VCR connected to the AV3 sockets of the set
S-VIDEO : S-VIDEO VCR connected to the S-VIDEO sockets
of the set (option)
COMPONENT : DVD Player connected to the COMPONENT
sockets on the set (option)
Repeatedly press the MENU button to return to normal TV view-
ing.
Alternatively you
can
select the TV
or
AV mode
button.
In AV
to return to TV
mode,
mode, press the
by pressing
MENU
OK
PR
VOL
VOL
PR
the TV/AV
D / E or NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when it is switched to playback
with the VCR connected to the Euro scart socket. The set is automatically switched to AV1 mode when an AV signal is input. But if you
want to keep on watching TV mode, press the D / E or NUMBER buttons. Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then D / E
Special
2.
3.
4.
5.
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off on
the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV view-
ing.
With the lock on, the display Child lock appears on the screen if any
button on the front panel is pressed while viewing the TV.
Note : The display Child lock will not appear on the screen if any
button on the front panel is pressed while displaying the menus.
23
Other functions
Blue back
Special
(option)
If you select On
ground appears
o
o
Special
4.
Press the OK
5.
Repeatedly
viewing.
1.
3.
VOL
PR
4.
5.
press the MENU button to return to normal TV
or
right
if the TV set
be used to
Press the MENU button and then D / E
moves
to
compensate the tilt.
button to select the
menu.
Press the G button and then D / E button to select Tilt.
Press the G button and then F / G button to adjust the tilt
Tilt
PR
F button.
picture may tilt to the left
position. This function can
Special
2.
or
(option)
The TV
another
VOL
menu.
3.
Tilt
OK
button to select the
Press the G button and then D / E button to select Blue back.
Press the G button and then D / E button to select On or Off on
the Blue back pull-down menu.
2.
MENU
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
Press the MENU button and then D / E
1.
OOO
on
pull-down
on
the
menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Degaussing (option)
Owing to the super large Tube in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
1.
Press the MENU button and then D / E
Special
button to select the
menu.
3.
Press the G button and then D / E button to select Degauss.
Press the G button and then D / E button to select On on the
Degauss pull-down menu. After the degauss function works,
4.
On mode switches to Off mode.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
2.
5.
viewing.
Note : If you cannot adjust the
it again after about 4 minutes.
24
screen
condition
by degaussing, try
Other functions
Games
Game is
function
1.
(option)
optional function, only a set with game
by using the remote control handset.
an
Press the MENU button and then D / E
Special
2.
3.
4.
Special
can
perform
this
o
o
button to select the
menu.
OOO
Press the G button and then D / E button to select Game.
Press the G button to enter the game mode.
Press the D / E button to select
button.
You
can
enjoy
the game
Note :
a.
Press the TV/AV
or
a
by using
game and then press the OK
the GAME owner's manual.
MENU button to return to the normal TV
viewing.
b.
If you want
a new
game, press the RED button to start
during
the game.
MENU
Sleep
timer
OK
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
PR
VOL
VOL
PR
Repeatedly press the SLEEP button to select the number of minutes. The display
will appear on the screen, followed by 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to count down
-
-
-
from the number of minutes selected.
Note :
a.
To view the
remaining sleep time, press the SLEEP button
SLEEP
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
-
c.
-
-
25
PIP
operation (option)
Option
PIP is
:
an
optional function,
can
operate.
PIP
(Picture
in
so
that
Picture) displays
a
only
the set with PIP function
within
picture
a
picture.
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
picture.
picture
Press the INPUT button to select the
input
mode for the sub
pic-
mode for the sub
pic-
ture.
Each time this button is pressed, each
ture is displayed as shown below.
Programme
number
S-VIDEO
Swapping
input
AV2
AV1
AV3
(option)
between main and sub
Press the SWAP button to
Programme
pictures
the main and sub
exchange
selection for sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
press the SIZE button to select the desired sub
size. The sub picture appears as below.
Repeatedly
1/16 size of the main
PIP
Note
ture
PR
STILL
PR
POSITION
SWAP
9/4 PIP
INPUT
When the sub
1/9 size
1/2 size
(option)
picture size is 1/2 of the main picture, the pic-
quality might get poor.
Sub
SIZE
:
picture
picture
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 4 or 9
sub pictures mode only and see your favorite station by exchanging the main and sub pictures.
Press the 9/4 PIP button to select 4 or 9 sub pictures.
Only the selected 4 or 9 sub pictures search all the stored stations.
Press the 9/4 PIP button again to switch off these sub pictures.
26
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
a
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
1
2
3
4
5
6
7
8
9
0
TV/AV
OK
PR
reappears.
PR
SIMPLE text
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
lowing
page.
TEXT
colour button in LIST mode
button to switch to LIST mode.
Programming
Press the
M
a
(option)
M
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press a coloured button.
2.
Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in the same
way.
27
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
1
2
3
4
5
6
7
8
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
9
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
lowing
i
28
page.
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double
height text.
this button to enlarge the top
this button again to enlarge
Press
Press
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
1
2
3
4
5
6
7
8
9
0
UPDATE
Displays the
teletext
TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
new
will appear at the top left hand
When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
HOLD
the automatic page
text page consists of 2 or
Stops
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
?
ture.
To switch the TV
Note
off press this button again.
When TV and text picture are displayed half and half
:
picture
of the screen, MIX function is not available.
TIME
When
viewing
TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button
again
a
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
D
/ E
or
to exit this function.
29
Connection of external
You
can
connect additional
equipment
equipment,
such
as
VCRs, camcorders
etc. to your set.
ANT IN
L L 75‰
Here shown may be somewhat different from your set.
1
OUT
VIDEO
(L/MONO)AUDIO(R)
IN2
AV1
AV2
Aerial socket
VCR
1.
2.
3.
ANT IN
L L 75‰
Y
OUT
PB
COMPONENT
VDEO
(L/MONO)AUDIO(R)
VIDEO
IN1
PR
INPUT(480)
4.
(L/MONO)AUDO(R)
IN2
AV1
AV2
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
Audio/Video in/out sockets
1.
ANT IN
L L 75‰
PB
Y
OUT
COMPONENT
VDEO
L/MONO)AUDIO(R)
IN1
PR
INPUT(480)
VIDEO
(L/MONO)AUDO(R)
2.
IN2
AV1
AV2
3.
VCR
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV 1, AV 2 or AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
via audio/video out sockets.
can
tape
Euro scart socket
1.
2.
VCR
S-VIDEO
(option)
can
also record programmes received
by
the TV
on
video
tape.
Note : Signal type RGB, i.e. the signals red, green and blue can
only be selected for the Euro scart socket. These signals are transmitted, for example, by a pay TV decoder, game machine or photo
CD unit, etc.
1
OUT
VIDEO
(L/MONO)AUDIO(R)
IN2
30
video
AV3
VCR
VCR
on
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to
Euro scart socket, the set will switch to AV 1 mode automatically. But if you want to keep on watching TV mode, press the
D / E or NUMBER buttons.
You
AV1
the TV
screen.
AUDIO
ANT IN
LL 75‰
by
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
L/MON
R
(option)
AV2
Connection of external
S-video / Audio in sockets
When
connecting
picture quality will
1.
2.
3.
4.
2.
3.
4.
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
be further improved.
an
socket, the
Connect the S-video socket of the VCR to the S-VIDEO socket
of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select S-VIDEO by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Component
1.
equipment
in sockets
S-VIDEO VCR
S-VIDEO
(option)
L/MON
AUDIO
Connect the COMPONENT video output sockets (Y Cb Cr, Y
Pb Pr or Y B-Y R-Y) of the COMPONENT (480i) to the COMPONENT INPUT sockets (Y PB PR) on the set.
Connect the audio cable from the COMPONENT to AUDIO IN
sockets of AV2.
Press the TV/AV button to select COMPONENT.
Press the PLAY button on the COMPONENT.
The COMPONENT playback picture appears on the screen.
R
AV3
S-VIDEO VCR
ANT IN
L L 75‰
Y
OUT
VDEO
PB
COMPONENT INPU
(L/MONO)AUDIO(R)
VIDEO
IN1
Headphone
socket
(L/MONO)AUDO(R)
IN2
AV1
AV2
(option)
models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphones.
Only
If you press the MUTE
switched off.
PR
(480)
COMPONENT
button, the sound from the headphone's is
S-VIDEOL/MN
AUDIO
R
AV3
31
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF