LG | LD-2060WH | LG LD-2060WH Owner’s Manual

DISHWASHER
OWNER'S MANUAL
MODEL
:
LD-2060WH
/ LD-2060SH
/ LD-2060MH
LD-2060WHB / LD-2060SHB / LD-2060MHB
LD-2060WHU / LD-2060SHU / LD-2060MHU
Please read this manual
carefully before operating
dishwasher. Retain it for future reference.
Capacity
12 Place
Dimension
600x600x850mm(WxDxH)
Weight
52
Power
Supply
See
rating
label
Power
Consumption
See
rating
label
Water Feed Pressure
P/No.: 3828DD7001F
settings
kg
50~800kPa
your
CONTENTS
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING
?
Please read this manual
using
?
?
-
using your dishwasher, follow
including the following:
When
carefully before
During
the dishwasher for the first time.
?
This manual contains very important
notes regarding the installation, use and
maintenance of your dishwasher.
The manufacturer can not be
SAFETY AND CAUTION
3~4
household
?
INSTALLATION INSTRUCTIONS
5~8
?
Do not
designed
9
OPERATING INSTRUCTIONS
-
FUNCTION OF CONTROL BUTTON
10~18
explosion
?
-
-
-
DISPLAY
11
HOW TO USE AND OPERATE
OPERATING
SEQUENCE
PROGRAM
USER MAINTENANCE INSTRUCTIONS
cause
TROUBLE SHOOTING GUIDE
?
installation
Electrical connection must be in
safety
is
rating label.
only guaranteed
?
or
not
use an
extension
cord.)
65ºC, adjust
19
the water heater
setting.
If the hot water
temperature
not be maintained
20
below 65ºC, the dishwasher must be
connected to cold water.
can
If power
must
21
supply cord is damaged,
only be replaced by the
manufacturer
SPECIFICATION
?
?
or
its service agent or
qualified person in order to
avoid
hazard.
a
or
use
the
the inner
It may
failure of your
opened.
the deformation
Do not
on
or
detergent for hand
washing.
The detergent for dishwasher should be
used for normal operation.
This appliance is fitted with a safety
function that automatically stops the
operation of the dishwasher when it is
exposed to heavy disturbance on its
Do not insert
anything
such
as
coin into
the vapor vent. It may cause the failure
of mechanical parts and noise.
?
Do not expose skin to vapor vent.
During operation, as hot steam may
?
Dishwasher
scald.
it
similar
sit
mains.
?
If the hot water exceeds
?
down
dishwasher.
cable
?
push
young children or infirm persons
without supervision.
regulations.(Do
18
electric shock.
door when the door
Electrical
cause an
Do not
when the earth system of your house is
in accordance with the related local
12~17
may
fire.
?
or
the dishwasher for industrial
They
or
Do not spray water on the appliance.
It may cause the failure of electric parts
for normal
accordance with the
10
any kinds of solvent in your
use
and commercial use, or other purpose.
The appliance is not intended for use
During
?
Do not
?
by
PARTS NAME
Only suitable household utensils should
placed in the dishwasher.
(Please avoid utensils; that are non-
dishwasher.
use.
use
use
heatresistant, metal decorated, etc.)
?
instructions.
This dishwasher is
precautions,
be
responsible for problems caused by
ignoring these safety and caution
?
basic
detergents are strongly
They can be extremely
dangerous if swallowed. Avoid contact
with skin and eyes and keep children
alkaline.
a
away from the dishwasher when the
door is open.
Check that the detergent receptacle is
This
appliance must be positioned so
that the plug is accessible.
The appliance is to be connected to the
water mains using new hose-sets and
empty after completion of the wash
cycle.
that old hose-sets should not be reused.
3
SAFETY AND CAUTION
Child
?
?
?
?
INSTALLATION INSTRUCTIONS
Safety
Controls may be locked
changed by a child.
using
"Child Lock" mode to prevent from all the
setting
from
being
children away from detergents and rinse-aids.
Do not allow children to operate the dishwasher.
children should be
supervised
to
ensure
that
they
do not
play
with the
appliance.
cabinet
Step
PREPARE CUPBOARD OPENING
This dishwasher is
1
size shown
as
designed to
2
or a
wall.
:
fit to the
CAUTION
below.
For
appliance must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. This appliance is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in accordance
This
2
Select
a
possible
location
as
close to sink
personal safety, remove house fuse
open circuit breaker before installation.
Do not use an extension cord or adapter
plug with this appliance. Electrical and
grounding connections must comply with
the national electrical code/provincial and
municipal code and/or other local codes.
as
or
for easy connections to water and
drain lines.
3
The dishwasher should not be installed
more
than 3 meters from sink for proper
drainage.
with all local codes and ordinances.
-
corner,
PREPARE ELECTRICAL WIRING
GROUNDING INSTRUCTIONS
WARNING
a
minimum 5cm of space is required
between the washer and an adjacent
a
Step1:
SAVE THESE INSTRUCTIONS
If dishwasher is to be installed in
Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.
Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.
Keep
Young
4
WARNING
1
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the appliance is
properly grounded. Do not modify the plug provided with the
appliance; if it will not fit the outlet have a proper outlet installed by
a qualified electrician.
This
appliance must be supplied with
rating voltage and hertz as shown
correct
instruction manual, and connected to
individual, properly grounded branch
circuit, protected by minimum 15 amp
on
an
circuit breaker
Wiring
2
time
or
must be 2
delay
wires with
fuse.
ground.
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher
3
side.(See
page 7
The power plug must be correctly
earthed, if in doubt, have it checked
qualified
plug.
If bare
chipboard
is
adjacent
to or above
the dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling due to steam.
4
5
by
by a
appliance
same plug
Electrician. No other
should be connected to the
outlet
Unit:mm
Fig.A)
a
double
adapter
or
similar
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Step3:
Step4:
Step5:
PREPARE DISHWASHER FOR
INSTALL THE DISHWASHER IN
DRAIN LINE CONNECTION
INSTALLATION
CUPBOARD
1
the dishwasher
1
Lay
2
Adjust
the
cabinet
as
legs
on
its back.
to the needed
shown in below
height
figure.
the drain line,
sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing adjustment
should be done using the spanner.
of
2
Slide the dishwasher into the cabinet
opening carefully.
Make
sure
that the
■ When the drain hose is connected
of rubber
piece
connector(not supplied) that must be
resistant to heat and detergent and may
be obtained from a plumbing shop.
Before
1
If the end of drain hose does not fit to
2
There
are
shown in
use a
2
typical connections
Figure A, B.
to a
separate stand pipe, it is essential that
air tight connection is made.
Refer to
an
Fig.B
as
drain hose inside the cabinet is not
kinked
or
stretched.
The "S" trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
CAUTION
If the
is below 850mm, you
should remove the top table by unscrewing
the 2 screws. (Two of rear)
height
of
cupboard
To prevent siphoning, one of the following
instruction methods must be followed:
■ When the drain hose is connected
to a
sink "s" trap or waste disposal unit, the
hose must be looped up to the underside
Fig.
B
:
Drainage
connection
-
stand
pipe.
of the bench top and secured.
Drain Hose Extension
Extend Drain Hose
Fig.
as
shown below.
A
CAUTION
When you connect or extend Drain Hose,
make sure that drain hose is not kinked.
(Bends should have 40 mm radius.)
6
7
PARTS NAME
INSTALLATION INSTRUCTIONS
Step6:
Step8:
WATER SUPPLY CONNECTION
HOW TO LEVEL THE PRODUCT
1
Connect the water
supply hose
to the
behind dishwasher and the water tap
shown in figure.
2
After
valve
installing
hear
sticky
side portion
or
as
a
the
product, if you feel some
frictional sound between the
of door and tub when you open or
adjust the level of
close the door, you have to
This dishwasher may be fed with either
hot or cold water. If the water can not be
product.
maintained below 65ºC, the dishwasher
must be connected to cold water.
Case 1. In
case
the door is slanted to the
right
connecting, the sealing tape or
sealing compound should be used to avoid
When
water leaks.
Make
sure
sharply
that the line is not kinked
or
bent.
Fig. C
?
?
If the door is slanted to the
not remain
Case 2. In
Water tap
shown in
right
figure C, repeat the procedure shown as below
until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there do
slant, stickiness
case
as
friction sound.
or a
the door is slanted to the left
1. Control Panel
11.
Adjust Leg
2.
12.
Upper
3. Door Handle
13.
Cutlery
4. Front Cover
14.
Detergent
5. Lower Cover
15.
Vapor
6. Process Monitor
16.
Upper Spray
7. Power Switch
17. Lower
8. Drain hose
18. Filter ASM
9. Inlet valve ASM
19. Lower Rack
10. Power Cord
20. Salt Container
Vapor
vent
Rack
Rack
& Rinse Aid
Vent Cover
Spray
Arm
Arm
Cap
Step7:
FINAL CHECK AND ASSEMBLING
1
Securely hand tighten supply hose to
supply.
Plug power supply cord into an
earthed the power plug and switch on.
water
2
After
installing
Fig.
?
the
product, operate
the dishwasher through one cycle
(Quick cycle is recommended) without
loading the dishes.
Through this, you can check for water
leak and operating conditions.
When you operate the product the
If the door is slanted to the left
as
shown in
figure D, repeat the procedure shown
until the door is operated normally.
1) Unscrew(counter-clockwise)
back side and
?
below
right leg
Inlet Hose
of
Funnel
the level.
the
not remain
8
the
as
high
opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there
2) Check
first, the noise may be occurred.
In that case, turn off power switch and
restart the dishwasher.
D
slant, stickiness
or a
The appearance and
specifications
may be varied without notice
do
friction sound.
9
according
to
localities.
Dispenser
FUNCTION OF CONTROL BUTTON
Extra Hot /
When select Extra Hot
function,
the
operating
temperature will be up
Start/Pause
Dial
Rinse+
Power
If you want to select
program, rotate the dial
If you want to start
prese the button.
clockwise
With each press, Start
and Pause is repeated
to
DISPLAY
cycle,
operating, press this
button first for power on.
For
When select Rinse+
during operation.
function, "rinse" is
If the machine remains in
operating, this button
automatically switches off
for safety and energy saving.
In case of irregular surge
Pause mode for 10
disturbance to the
one
or
counterclockwise.
77.
added
time.
minutes,
After
the Power is
1.
machine,
the power may be
automatically turned off for
automatically turned off.
4. Time Left
Program
?
safety.
When you select program
of the selected program is
by dial, The display
lighted on.
2. Indicator
?
Before
starting, the display window
running time of the selected
shows the
?
program.
Child Lock
?
?
Refill with rinse aid
?
Refill with
the
?
3.
Processing
?
Processing
special
After
salt
starting, the display
remaining time.
If the dishwasher has
type is
Used to lock
Time
Half Load
Delay
unlock the
If you want to
delay the start of
upper
control buttons to
selected
to save energy.
prevent all the
program, press
this button before
With each press, can
select upper or lower
or
setting from
being changed by
a
child.
For
locking/
unlocking, press
Extra Hot and
pressing
start
Pressing the
delay time will
increase time by
1 hour.
The
simultaneously.
time
delay
can
start
program
phase
of small
or
load,
lower rack
use
only
only.
dial knob to the clockwise
always works vario
washing, which operate
to "on"
upper and lower spray
canceled when power failure
The
or
once
the
or
setting is
selected
"off", press the Half Load button.
beep on/off function is automatically
occur.
alternately.
1
hour to 19 hours.
10
letters
21 and follow the
The beep on/off function can be set by
pressing the Half Load and Power button
simultaneously before starting. then, a "on"
will appear in the time display.
To change the setting:
counterclockwise.
error
displayed, please
shooting guide page
guide.
refer to the trouble
The dishwasher must be switched off.
turn the
case
displayed.
is indicated.
on/off
you don't select
this button, the machine
In
arm
be
adjusted from
case
rack
button.
Rinse+ button
In
Beep
trouble, the trouble
indicator
If this
Child Lock
a
window shows
11
are
HOW TO USE AND OPERATE
1.
For the best
Be careful
large items not to prevent
the detergent dispenser lid from
opening
Dishwasher
Loading your
washing performance,
it is
that the dishwasher is loaded
important
according to instructions.
Before loading items into the dishwasher,
you must scrape off large particles in
particular non soluble items such as bones,
toothpicks, pips, etc.
3.
the
water will
contact all surfaces.
angle to help
properly.
water
prior
off and
at an
be
to
cutlery
Basket
cutlery
with the handles down. The
in
cover
bottom
facing
and bowls must be
Extra cups
cooking utensils
or
positioned
can
be laid
Take
care
when
loading
and
on
spray
care
arm
all
Rack
Upper
models)
adjusting, ensure rack is empty of
all crockery.
You can change the position of the upper
rack by pulling the rack upward(to upper
position) or pulling the two levers on the
left and right sides of the rack to take the
rack down (to lower position).
the front of the
Cups, glasses
upside down.
on
the
Your upper rack can be raised or lowered to
cater for different size of crockery. Before
cups, glasses and dishwasher safe plastic
items. Plates should be positioned upwards
plate
Adjusting
(Not
knives located at upper rack.
sharp
scraps should be
loading in the dishwasher.
5.
the fold down cup racks which may also
provide support for long stem glasses.
clipped
dry
on
Upper Rack
away from the
basket if you choose not to use them.
For the knives, place at separate rack for
hinged
and
the
rack.
basket to prevent
of similar items. Place the
cover
Take
■ Items with burnt
soaked
run
Cutlery
Loading
The upper rack is best loaded with more
delicate items, small plates, long cutlery,
should be mixed within each
section of the
nesting
can
■ Deep based items should be placed
the
4.
with the
loading
following general guidelines:
■ Position crockery such that
Using
Cutlery
the dishwasher, observe the
When
HOW TO USE AND OPERATE
It is recommended to level the upper rack
gently for more convenience and correct
operation.
And when you pull the rack upward, hold
not to obstruct the rotation of the
under the upper rack.
unloading
items.
the middle location of the upper rack
(
marked
position)
After adjusting, check that the spray
is free to rotate.
2.
Loading
?
the Lower Rack
Front
The lower basket is best loaded with dinner
plates,
and
soup bowls, dishes, pots, pans, lids
the grill tray.
Non Dishwasher Safe Items
even
Plates should be
facing
positioned upright
the center of the rack.
Pots, pans and large dishes
upside
and
The combination of high water temperatures and
dishwasher detergent may damage particular
must be turned
down.
items, therefore
Take care not to obstruct the rotation
of the spray arms.
we
do not recommend
dishwasher to wash the
using
the
following:
Copper or anodized aluminum
Hand painted silver or gold leaf crockery
Wood
Iron
or
bone handled utensils
or non
rust
Plastic items which
12
WARNING
proof utensils
are
not
Before adjusting, ensure rack is
empty of all crockery.
Otherwise crockery may be
damaged or you may be injured.
dishwasher safe.
13
arm
HOW TO USE AND OPERATE
6.
?
HOW TO USE AND OPERATE
Detergent
must be
chamber before
every program
Push latch to open
except the Pre-Wash.
?
?
Aid
? For filling
put into the detergent
starting
Adding Rinse
Dispenser
7.
Adding Detergent
Dispenser
To fill the Rinse Aid
chamber,
rotate the
Please follow the manufacturer's
round cap counter clockwise and remove.
Fill the container to the maximum level
instructions
printed on
with
determining
the correct
the manual when
dosage.
a
If your dishes are only moderately dirty,
you may be able to use less detergent than
during
Rinse Aid, then
good quality
and lock the cap.
The Rinse Aid is
replace
automatically dispensed
cycle.
the final rinse
recommended.
?
?
15g and 25g.
The amount of detergent depends on
program. Refer to the guide table.
The
Chambers hold
Place proper
detergent into this
the
PROGRAM
AMOUNT OF DETERGENT
Intensive
20g
dosage setting
most installations.
cloudy spots, streaks or water marks
your glassware, it may be necessary
increase the setting. To do so, remove the
on
compartment
cap and rotate the indicator arrow to a
higher setting then replace the cap If the
.
?
there is foam present
glasses
on the bottom of the glass or the bottom of
15g
Economy
15g
Gentle
10g
? For refilling
Quick
10g
Depending
After the
detergent
is
the machine. Select
detergent
supplied,
the
The
?
detergent is dispensed automatically
during the operation.
the
Information
detergent
because the foam
poison
the
a
lower
setting.
dosage setting
and the
approximately. The rinse aid level can be
by two methods.
By the indicator window on the dispenser
when the dishwasher door is fully open.
checked
?
Rinse Aid Information
Black indicates sufficient Rinse Aid
and
O
?
Clear indicates Rinse Aid
By
the
light
on
dishwasher is
the control
working
required
panel
Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved
when the
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
on.
intended for
household dishwashers.
washing detergent
special
and like all
kept out of reach of
children. At completion of each wash
program, the detergent compartment
should be checked and any remaining
detergent removed.
operation.
only
a
household chemicals should be treated
as a
The chamber lid remains open after
Use
detergent
detergent
Dishwasher
The
Detergent
used is
on
or
number of washes, the chamber may need
only to be topped up once per month
WARNING
chamber lid should be closed.
?
smeared
Normal
No
factory set to suit
If, after washing, you
notice
are
Pre-Wash
is
(Ordinary hand-
should not be used,
can
interfere with proper
operation.)
When the
lamp is lighted on, it means the
refill the Rinse.
rinse is almost exhausted. Then,
14
15
HOW TO USE AND OPERATE
8. Salt
HOW TO USE AND OPERATE
■ For
Filling
This model has
a
When the salt is exhausted, the salt refill lamp is lighted on automatically during operation. Then
the salt should be refilled after finished the cycle. But it is recommended the salt refill should
water softener to soften hard water.
So you should read these notes
carefully for correct operation.
provide satisfactory rinsing results, the dishwasher requires soft water, i.e.,containing
In order to
refilling
little
lime, otherwise water stains will be left behind on the dishes and interior containers.
If the tap water exceeds a certain level of hardness, it must be softened, i.e.,decalcified, so that it
always
any
be done
excess
(as
mentioned
salt solution
previous page)
immediately.
before
starting
next
operation
to thin and drain away
or no
can
When the
be used in the dishwasher.
This is achieved
by adding
a
special salt to the water softener inside the dishwasher.
required amount of salt, is set up according to how hard the tap
The water softener, that is the
lamp is lighted on, it means the
refill the Salt.
salt is almost exhausted. Then,
water is.
? For First filling
?
?
?
?
Check the water hardness of your area. (Your water supplier will be able to inform you
hardness and hardness range of the water in your area.)
Set the water hardness according to the setting method of the water softener.
Remove Lower rack and
the cap of salt container.
Fill the salt in the salt container before using your dishwasher for the first time. Use
?
the
Note
?
capacity
is about 1.9
kg. (Use
After
filling with salt, may take a while before the indicating lamp goes out.
When the control is set to
", it is not necessary to fill up with salt as none will be consumed while the dishwasher is operating.
The Salt Refill lamp is switched off. If the control is set between
"and"
", then salt must be added to the dispenser.
"
?
unscrew
funnel for easy and clean filling. The salt container
regenerating salt intended for dishwasher.)
?
on
"
a
kind of
coarse
salt
or
WARNING
After
filling, wipe off any spilled salt to seal the cap properly.
Screw the cap tightly to prevent the suds penetration that may
cause
the water
softening
troubles.
Do not pour
detergent
into the container for
special
9. Fold down dividers.
(Not
on
all
10.
models)
Fold-down dividers
be lowered to
salt. This would
at the
destroy the
water softener.
Drying
At the end of the program, it is
lower rack
improve stacking
recommended to
can
assist in
of pots
fully
open the door to
drying.
and pans.
11.
? Setting up the water softening system
Adjust
the water softener to the
water in the
setting given
in the table that
corresponds to the
adjusted in 8 steps.
where you live. The water softener can be
The dishwasher is programmed at the factory for a water hardness level of
area
The water hardness level which has been
by using
the buttons
on
the control
programmed into
the machine
"
can
?
hardness of the
?
".
?
be checked and altered
?
panel.
?
1. The dishwasher must be switched off.
2. Press Start / Pause and Power button
A"
3. To
"
and 1
change
the
simultaneously and keep them pressed.
figure will appear in the time display.
setting: Turn the dial knob to the clockwise or counter-clockwise.
Every time the dial knob is turned,
The display is changed between
"
the
figure
"
and"
is
4. Once the hardness
The hardness
setting is correctly adjusted,
setting is then saved.
16
changed one by
?
one.
".
press the Start / Pause button.
17
Energy Test(EN50242)
Appliance loaded in accordance with
standard specifications.
Example of loaded dishwasher : p.12~13
Capacity : 12 place settings
Comparability course : Economy
Rinse aid setting : 3
Reference cleaner : 6g of detergent onto
the inside surface of the door and fill 24g
into the detergent dispenser.
Height-adjustable Rack-U must be
inserted in the uppermost position.
OPERATING SEQUENCE
PROGRAM
The indicator
Press the "Power" button
the
When you press the "power" button, the
state of default program being set will be
phases
lights of the program and all
the program consists of will
come on.
Before
starting, the display window shows
running time of the selected program.
displayed.
the
Check that there is rinse
To start, press the "Start/Pause"button.
After starting, the display window shows
the
aid and salt
The
corresponding
indicator
lights
will
illuminate if refilling is necessary.
Open
The time in the
they
positioned (See
Instructions").
properly
a
cutlery
interrupted.
At the end of the
in it.
After
operating, "End"is displayed on the
digital display for seconds and buzz sound
informs you that the program has ended
and the dishwasher automatically switches
CAUTION
off for
Do not load the items in upper rack with
the lower rack is pulled out and loaded.
Ensure that the spray
saving.
the lower rack first and then the upper
water dripping from the
upper rack onto the dishes in the lower one.
Empty
one;this will avoid
starting
Intensive Wash
Economy
This program is for very heavily soiled
loads including pots, pans and casserole
dishes which may have
dry
This program is for
Wash
light soiled everyday loads.
food residue.
Gentle Wash
detergent
required amount of detergent
the dispenser. Close the detergent
dispenser lid.
Warning
into
In general it is not advisable to open the door
while the machine is working;
If the door is opened however, a safety device
ensures that the machine stops.
Care must be taken if the door is opened during
the hot phase or immediately after a program has
the
program
Turn the dial knob to select the program.
If necessary, select the option function
corresponding
and energy
CAUTION
freely
and
safety
arms
Add the
Setting
washing
program
Pull the upper rack out and arrange the
cups, glasses, etc. in it.
Measure out
opened during the run of the
safety device ensures that the
program
machine stops.
Once the door is closed the program will
start from the point where it was
"User Maintenance
Remove any scraps of food.
Pull the lower rack out and arrange the
can rotate
window will start
If the door is
clean and
Load the dishes
dishes and
display
to decrease from minute to minute.
the filters
are
time.
Remember to load all dishes into
the selected rack.
the door and check
Ensure
remaining
Select if necessary the washing on only
one rack by pressing the half load button.
finished,
as
Normal Wash
This program is for
everyday loads.
normally
This program is for
like glasses.
soiled
delicate items
Quick Wash
This program is for that quick wash of
lightly soiled recently used dishes and
steam may escape.
cutlery.
to the desired program.
18
washing
19
USER MAINTENANCE INSTRUCTIONS
To prevent trouble and poor operating, it is
filters and spray arms at intervals.
?
Remove the lower rack first.
?
?
Turn the mesh filter counterclockwise off.
?
?
?
to check and care for the
Take out the mesh filter, upper STS filter
and outer filter.
Pull the upper rack forwards.
Check that the water jet holes
blocked
Clean them if necessary.
Replace them in the reverse order.
If
a
problem
by
food
are
The
not
on
particles.
?
When necessary to clean,
by unscrewing the nut.
?
Clean the spray
reverse order.
arm
and
remove
replace
the
do not
lamps
Check that the water jet holes
blocked
?
by
food
(The display show
"
The
"
"
display
shows
Drain
up.
Clean the spray
down.
arm
and
Door is not
?
The start button is not
?
The drain hose is kinked.
code)
?
The filter is
code
?
Excessive water is
?
The inlet valve is troubled.
display
shows
"
The
display
shows
"
display
shows
"
?
Water is not
"
?
Water
?
Water is leaked
"
"
?
The circuit of Heater is troubled.
?
The
mounting of spray arms is blocked by food
particles. (Clean the holes of the spray arm)
?
The amount of
?
Salt is exhausted in the salt container.
?
The salt container cap is not
?
Too little Rinse-aid
dispensed.
?
Too little Rinse-aid
dispensed.
?
Incorrect amount of
code
code
code
does not rotate
arms
smoothly
are
or
electricity
circuit breaker
of the house
fully
tripped.
cut
was
closed.
pressed.
clogged. (Clean
the
filter)
supplied than
supplied. (Water tap
leakage
off.
normal water level.
is not
opened)
in Hose connections
by damages.
not
White
remove
replace
?
Pump operated)
The
the
deposits
are
dish washer after
arm
by pulling
?
The
away.
"
The spray
particles.
When necessary to clean,
?
The machine does not start.
The
?
Fuse blown
on.
properly
inserted in the socket.
Plug
?
when the power switch
pumped
is not
?
come
arm
it in the
whether the
see
Possible Causes
(Automatically
Spray Arm
in your machine, call for service.
Problem
Water is not
Lower
occurs
Before you call for service, check the below instructions to
problem can be solved by yourself first.
Upper Spray Arm
Filters
?
important
TROUBLE SHOOTING GUIDE
it
left
on
the
washing.
pulling
Streaks
Dry
are
results
left
on
are
not
Washing results
satisfactory.
glassware
satisfactory.
are
not
?
?
?
?
?
20
detergent
or
rinse-aid set
securely
incorrectly.
screwed
detergent.
incorrectly arranged or overloaded.
Filters are clogged.
Water jet holes of spray arms blocked.
Spray arms' rotation obstructed by utensils.
Utensils
Unsuitable program selected.
21
on.
MEMO
MEMO
22
23
Download PDF

advertising