LG | TD-V10137E | LG TD-V10137E Owner’s Manual

OWNER'S MANUAL
COMMERCIAL DRYER
Please read this manual carefully before operating
your dryer and retain it for future reference.
MODEL
TD-V10137E
P/NO : MFL62512816
PRODUCT FEATURES
OUTSTANDING PERFORMANCE
The dryer features the largest capacity, quick drying times, quiet operation, and an
energy-saving system.
STAINLESS STEEL DRUM
Stainless steel drum doesn’t rust.
ARTISTIC DESIGN
Modern front panel look and big clear glass door make your dryer look stylish
EASY OF USE
An entire selection of user-friendly functions makes operating the dryer easy.
ULTRA CAPACITY
The larger drum enables better tumbling and less tangling and wrinkling of the laundry.
CONTENTS
PART 1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................................. 3
PART 2. SPECIFCATIONS .................................................................................................................................... 8
PART 3. IDENTIFICATION ..................................................................................................................................... 9
PART 4. OPERATING YOUR DRYER ................................................................................................................. 11
PART 5. PROGRAMMING MODE ....................................................................................................................... 12
PART 6. ERROR MODE ...................................................................................................................................... 17
PART 7. POWER FAIL RECOVERY ................................................................................................................... 17
PART 8. DEFAULT DRYER SETTINGS .............................................................................................................. 17
2
Part 1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING For your safety, the information in this manual must be followed to minimize the risk of
fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Your Safety and the safety of others is very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey
all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER or WARNING. These words
mean:
DANGER: You can be killed or seriously injured if you don’t immediately follow instructions.
WARNING: You can be killed or seriously injured if you don’t follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the
chance of injury, and tell you what can happen if the instructions are not followed.
BASIC SAFETY PRECAUTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using this appliance,
follow basic precautions, including the following:
• Read all instructions before using the dryer.
• Before use, the dryer must be properly installed as described in this
manual.
• Do not place items exposed to cooking oils in your dryer. Items
contaminated with cooking oils may contribute to a chemical reaction that
could cause a load to catch fire.
• Do not dry articles that have been previously cleaned in, washed in,
soaked in, or spotted with gasoline, dry-cleaning solvents, or other
flammable or explosive substances as they give off vapors that could
ignite or explode.
• Do not reach into the dryer if the drum or any other part is moving.
• Do not repair or replace any part of the dryer or attempt any servicing
unless specifically recommended in this Use and Care Guide or in
published user-repair instructions that you understand and have the skills
to carry out.
• Do not tamper with controls.
• Before the dryer is removed from service or discarded, remove the door
to the drying compartment.
• Do not allow children to play on or in the dryer. Close supervision of
children is necessary when the dryer is used near children.
• Do not use fabric softeners or products to eliminate static unless
recommended by the manufacturer of the fabric softener or product.
• Do not use heat to dry articles containing foam rubber or similarly textured
rubber-like materials.
• Keep area around the exhaust opening and adjacent surrounding areas
free from the accumulation of lint, dust, and dirt.
• The interior of the dryer and exhaust vent should be cleaned periodically
by qualified service personnel.
• Do not install or store the dryer where it will be exposed to the weather.
• Always check the inside of the dryer for foreign objects.
• Clean lint screen before or after each load.
• Do not dry unwashed items in the tumble dryer.
• Items that have been soiled with substances such as cooking oil,
acetone, alcohol,petrol,kerosene,spot removers, turpentine, waxes and
wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
• Items such as foam rubber(latex foam), shower caps, waterproof textiles,
rubber backed articles and clothes or pillows fitted with foam rubber pads
should not be dried in the tumble dryer.
• Fabric softeners, or similar products, should be used as specified by the
fabric softener instructions.
• The final part of a tumble dryer cycle occurs without heat(cool down
cycle) to ensure that the items are left at a temperature that ensures that
the items will not be damaged.
WARNING:
Never stop a tumble dryer before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated.
• The lint trap has to be cleaned frequently, if applicable.
• Lint must not to be allowed to accumulate around the tumble dryer.
• Adequate ventilation has to be provided to avoid the back flow of gases
into the room from appliances burring other fuels, including open fires.
• The appliance is not intended for use by young children or infirm persons
without supervision.
• Young Children should be supervised to ensure that they do not play with
appliance.
3
Part 1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING For your safety, the information in this manual must be followed to minimize the risk of
fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this appliance or
any other appliances.
• Installation and service must be performed by a
qualified installer, service agency, or the gas
supplier.
WHAT TO DO IF YOU SMELL GAS:
1. Do not try to light a match or cigarette, or turn on
any gas or electrical appliance.
2. Do not touch any electrical switches. Do not use
any phone in your building.
3. Clear the room, building, or area of all occupants.
4. Immediately call your gas supplier from a
neighbor’s phone. Follow the gas supplier’s
instructions carefully.
5. If you cannot reach your gas supplier, call the fire
department.
CALIFORNIA SAFE DRINkING WATER AND TOXIC ENFORCEMENT ACT
This act requires the governor of California to publish a list of substances known to the state to
cause cancer, birth defects, or other reproductive harm and requires businesses to warn customers
of potential exposure to such substances.
Gas appliances can cause minor exposure to four of these substances, namely benzene, carbon
monoxide, formaldehyde, and soot, caused primarily by the incomplete combustion of natural gas or
LP fuels.
Properly adjusted dryers will minimize incomplete combustion. Exposure to these substances can
be minimized further by properly venting the dryer to the outdoors.
4
Part 1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. This appliance must
be equipped with a cord having an equipmentgrounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet that is
properly installed and grounded in accordance with
all local codes and ordinances.
WARNING
— Improper connection of
the equipment-grounding conductor can result in a
risk of electric shock. Check with a qualified
electrician or service
person if you are in doubt as to whether the
appliance is properly grounded.
Do not modify the plug provided with the appliance.
If it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This appliance must be connected to a grounded
metal, permanent wiring system or an equipmentgrounding conductor must be run with the circuit
conductors and connected to the equipmentgrounding terminal or lead on the appliance.
Electrical shock can result if the dryer is not properly
grounded.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
• Properly ground dryer to conform with all
governing codes and ordinances. Follow details
in the installation instructions. Electrical shock can
result if the dryer is not properly grounded.
• Before use, the dryer must be properly
installed as described in this manual.
Electrical shock can result if the dryer is not
properly grounded.
• Install and store the dryer where it will not be
exposed to temperatures below freezing or
exposed to the weather.
• All repairs and servicing must be performed by
an authorized servicer unless specifically
recommended in this Owner’s Guide. Use only
authorized factory parts. Failure to follow this
warning can cause serious injury, fire, electrical
shock, or death.
• To reduce the risk of electric shock, do not
install the dryer in humid spaces. Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• Connect to a properly rated, protected, and
sized power circuit to avoid electrical overload.
Improper power circuit can melt, creating electrical
shock and/or fire hazard.
• Remove all packing items and dispose of all
shipping materials properly. Failure to do so can
result in death, explosion, fire, or burns.
• Place dryer at least 18 in. above the floor for a
garage installation. Failure to do so can result in
death, explosion, fire, or burns.
• Keep all packaging from children. Packaging
material can be dangerous for children. There is a
risk of suffocation.
5
Part 1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
SAFETY INSTRUCTIONS FOR INSTALLATION
Exhaust/Ducting:
• Gas dryers MUST be exhausted to the outside.
Failure to follow these instructions can result in fire
or death.
• The dryer exhaust system must be exhausted
to the outside of the dwelling. If the dryer is
not exhausted outdoors, some fine lint and
large amounts of moisture will be expelled into
the laundry area. An accumulation of lint in any
area of the home can create a health and fire
hazard.
• Use only rigid metal or flexible metal 4-in.
diameter ductwork inside the dryer cabinet or
for exhausting to the outside. Use of plastic or
other combustible ductwork can cause a fire.
Punctured ductwork can cause a fire if it collapses
or becomes otherwise restricted in use or during
installation.
• Ductwork is not provided with the dryer, and
you should obtain the necessary ductwork
locally. The end cap should have hinged
dampers to prevent backdraft when the dryer
is not in use. Failure to follow these instructions
can result in fire or death.
• The exhaust duct must be 4 in. (10 cm) in
diameter with no obstructions. The exhaust
duct should be kept as short as possible. Make
sure to clean any old ducts before installing
your new dryer. Failure to follow these
instructions can result in fire or death.
• Rigid or semi rigid metal ducting is
recommended for use between the dryer and
the wall. In special installations when it is
impossible to make a connection with the
above recommendations, a UL-listed flexible
metal transition duct may be used between the
dryer and wall connection only. The use of this
ducting will affect drying time. Failure to follow
these instructions can result in fire or death.
• DO NOT use sheet metal screws or other
fasteners which extend into the duct that could
catch lint and reduce the efficiency of the
exhaust system. Secure all joints with duct tape.
For complete details, follow the Installation
Instructions. Failure to follow these instructions
can result in fire or death.
SAFETY INSTRUCTIONS FOR STEAM FUNCTIONS
WARNING:
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
• Do not open the dryer door during steam
cycles. Failure to follow these instructions can
result in a burn hazard.
• Do not dry articles that have been previously
cleaned in, washed in, soaked in, or spotted
with gasoline, dry-cleaning solvents, or other
flammable or explosive substances as they
give off vapors that could ignite or explode.
Failure to follow these instructions can result in fire
or death.
6
• Do not fill the steam feeder with gasoline, drycleaning solvents, or other flammable or
explosive substances. Failure to follow these
instructions can result in fire or death.
• Do not touch the steam nozzle in the drum
during or after the steam cycle. Failure to follow
these instructions can result in a burn hazard.
• Do not fill the steam feeder with hot water
(over 86° F / 30° C). Failure to follow these
instructions can result in a burn hazard.
Part 1
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
SAFETY INSTRUCTIONS FOR CONNECTING ELECTRICITY
WARNING:
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
• Do not, under any circumstances, cut or
remove the ground prong from the power cord.
To prevent personal injury or damage to the dryer,
the electrical power cord must be plugged into a
properly grounded outlet.
• For personal safety, this dryer must be
properly grounded. Failure to do so can result in
electrical shock or injury.
• Refer to the installation instructions in this
manual for specific electrical requirements for
your model. Failure to follow these instructions
can create an electrical shock hazard and/or a fire
hazard.
• This dryer must be plugged into a properly
grounded outlet. Electrical shock can result if
the dryer is not properly grounded. Have the
wall outlet and circuit checked by a qualified
electrician to make sure the outlet is properly
grounded. Failure to follow these instructions can
create an electrical shock hazard and/or a fire
hazard.
• The dryer should always be plugged into its
own individual electrical outlet which has a
voltage rating that matches the rating plate.
This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
• Never unplug your dryer by pulling on the
power cord. Always grip plug firmly and pull
straight out from the outlet. The power cord can
be damaged, resulting in a risk of fire and
electrical shock.
• Repair or replace immediately all power cords
that have become frayed or otherwise
damaged. Do not use a cord that shows cracks
or abrasion damage along its length or at
either end. The power cord can melt, creating
electrical shock and/or fire hazard.
• When installing or moving the dryer, be careful
not to pinch, crush, or damage the power cord.
This will prevent injury and prevent damage to the
dryer from fire and electrical shock.
SAVE THESE INSTRUCTIONS
7
Part 2
SPECIFICATIONS
Type:
Electric or Gas Dryer
Rating:
Please refer to the rating label regarding detailed information.
Size:
686 x 761 x 983 (mm)
Capacity:
10 kg
Weight:
57 kg
Note
Specifications subject to change by manufacturer.
8
Part 3
IDENTIFICATION
NONCOIN TYPE (TD-V10137E)
1. DISPLAY LED
2. CYCLE BUTTON
3. START BUTTON
4. STATUS LED
5. CYCLE LED
9
Part 3
IDENTIFICATION
CYCLE LED
DISPLAY LED
CYCLE BUTTON
STATUS LED
START BUTTON
1 DISPLAY LED
The Display shows the vend price, remaining time,
and programming options.
Error codes are also displayed here.
3 START BUTTON
The START LED flashes when the full vend price
has been satisfied then the cycle has been chosen or
the machine is paused.
The START LED flashes when a card is inserted to
add time to the current cycle.
4 STATUS LED
2 CYCLE BUTTON
Press the cycle button to Select the desired cycle
based on laundry types and conditions.
WHITES AND COLORS
Use this cycle to get high heat for heavy fabrics,
such as jeans corduroys or work clothes (High heat).
PERMANENT PRESS
Use for drying sturdy fabrics such as work casual
clothes (Medium heat).
DELICATES
Use for drying synthetic fabrics,washable knit
fabrics and no-iron finishes (Low heat).
10
•
LED flashes whenever the heating
cycle is in operation.
•
LED flashes whenever the cool down
cycle is in operation.
5 CYCLE LED
WHITES AND COLORS, PERMANENT PRESS,
or DELICATES LED is lit to indicate that heated
portion of a cycle is in operation.
Part 4
OPERATING YOUR DRYER
1 Ready mode
The display LED shows each cycle price and cycle
LED toggle.
3 Change cycle
You cannot change the cycle while the machine is
running.
But if the door is opened, the cycle is
ended and then the cycle can be changed.
2 Select the cycle
Press the desired cycle and the start button. The
display LED will show the remaining time and the
selected cycle starts.
Note
The last 2 minutes of the remaining time are
always for the cool down portion.
4 Cycle finish
After the COOL DOWN of cycle, the machine
stops and LED display shows End.
If you press any key or open the door, the dryer
defaults to the ready mode.
5 Set the cycle time
Press cycle button, display led shows firstly
cycle time ’10’.
You can only increase the cycle time by pressing
same cycle button. But if display led shows ‘1:40’,
the cycle time return ’10’ by pressing one more
same cycle button
The cycle time will be set from ’10’(10 minute)
to ‘1:40’(100 minute).
11
Part 5
PROGRAMMING MODE
1 Programming mode
You can check machine information or change setting on Program setup or Diagnostic test.
There are two methods that you can enter programming mode.
2 Check the programming mode by button
How to enter "Programming mode"
You can enter programming mode
only for Idle state and pause state.
- Noncoin type
1) Push the WHITES AND COLORS and DELICATES
button at the same time
2) Push the PERMANENT PRESS button 3times.
3) Push the START button.
4) ’LqC1’ will show on the display.
How to use button
You can change Dryer vend price, cycle time and
Cycle parameters, etc.
Press button
Description
WHITES AND
COLORS
Move to upper level
PERMANENT
PRESS
Move to the mode in the
same level (+)
DELICATES
Move to the modes in the
same level (-)
START
Enter the selected mode
NONCOIN TYPE
Note
• If you turn on the power without connecting the meter case for the first time, the machine will display
.
• When the machine comes from the factory, it is set in the coin type. You can change Card/Coin type by button.
(For more information refer to SETUP mode’s
.)
12
Part 5
PROGRAMMING MODE
Algorithm Flow Chart shows how to control programming mode.
Before program set, check the structure of programming mode.
1. Push and hold the WHITES AND COLORS and DELICATES at the same time. After that push PERMANENT PRESS button for
3 times. Push START button.
2. Press WHITES AND COLORS button to move the upper level.
3. Press PERM PRESS(+) or DELICATES(-) button if you want to be at the same level.
4. Press START button to enter the details of Set up, Diagnostic Tests mode.
is to set price value, time value and vend type etc.
consists of line test, reset, free cycle and kill cycle.
Is to collect the usage data.
STRUCTURE OF PROGRAMMING MODE
Note
• Do not use
,
.
• It is only used in inspecting the machine.
13
Part 5
PROGRAMMING MODE - Test Mode
Diagnostic tests :
(display)
This program has been added for testing the dryer and detecting errors.
Entering the test mode
Data Name
Button
Display
Push and hold the WHITES AND COLORS and DELICATES at the same time.
After that push PERMANENT PRESS button for 3 times. Push START button.
Press the WHITES AND COLORS button.
Then
appears in the display.
Enter the diagnostic test mode.
1. Entering programming mode
Entering
the test mode
Description
2. WHITES AND COLORS
3. START
1
Pressing the START button cycles to the next test function.
Number of times the START
button is pressed
Display
Checking point
None
LqC 1
1 time
Check the version and code of machine.
■ ELECTRIC TYPE : DO:OE
■ GAS TYPE : US:Og
Version and code of machine (All LED on)
Display DO:OE or DO:Og and EU:XX
alternately. XX is the version number.
2 times
Motor runs.
Measured moisture value (70~239)
3 times
■ ELECTRIC TYPE: Heater runs.
Motor + Heater 1 (2700W)
■ GAS TYPE: GAS valve runs.
Motor + Valve
Current temperature (5~70)
(Displays the temperature inside the drum in
° Celsius.)
■ ELECTRIC TYPE: Heater runs.
Motor + Heater 1 +Heater 2 (5400W)
■ GAS TYPE: GAS valve runs.
Motor+Valve
Current temperature (5~70)
(Displays the temperature inside the drum in
° Celsius.)
LED & KEY CHECK
Press WHITES AND COLORS button.
Press PERMANENT PRESS button.
Press DELICATES button.
Version and code of machine
6 times
Test ends.
LqC1
During check, if the door is open.
Door switch
(Motor & Heater Off, Buzzer beeps seven
times)
dE
(The door is open. Please close the door
completely)
During check, if the door is closed
Test goes back at step 2.
(Motor on & Heater Off)
Measured moisture value (70~239)
4 times
5 times
Note
During LqC1 test, if no buttons are pressed for 4 minutes, machine will be turned off automatically.
Do not use
.
14
Part 5
PROGRAMMING MODE - Test Mode
2 Factory reset - EEPt
After a factory reset, all values are reset to the default values.
Button
Entering set up mode.
You will see LqC1
Display
Press the PERMANENT PRESS or the DELICATES
Button until
appears in the display.
Press the START button.
Press the PERMANENT PRESS button until
appears in the display.
Press the START button, then factory reset is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
Note
• Dryer default value
- Drying time
45 Minute
- Top off time
15 Minute
15
Part 5
PROGRAMMING MODE - Test Mode
3 Time Set Up
Button
Entering set up mode.
You will see LqC1
Press the PERMANENT PRESS or the DELICATES button
until
appears in the display.
Press the START button.
The display cycles through 2000 --> 0101 --> Sat --> 0000.
Press the START button.
Press PERMANENT PRESS (+) or DELICATES(-) button to
select year between 2000 and 2099.
Press the START button.
The machine sets up the year, then advances to the next
process automatically.
Press PERMANENT PRESS (+) or DELICATES(-) button to
select month between 01 and 12.
Press the START button.
The machine sets up the month, then advances to the next
process automatically.
Press PERMANENT PRESS (+) or DELICATES(-) button to
select day between 01 and 31.
Press the START button.
The machine sets up the day, then advances to the next
process automatically.
Press PERMANENT PRESS (+) or DELICATES(-) button to
select hour between 00 and 23.
Press the START button.
The machine sets up the hour, then advances to the next
process automatically.
Press PERMANENT PRESS (+) or DELICATES(-) button to
select minute between 00 and 59.
Press the START button.
The machine sets up the minute.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• Coin type - Close the service door.
• Card type - Pull the service card.
16
Display
Part 6
ERROR MODE
Meaning of Error Codes that LED displays during occurrence or problem.
Dryer error code
PROBLEM
Part 7
POSSIBLE CAUSE
SOLUTION
It is displayed when thermistor is open.
Thermistor should be replaced.
It is displayed when thermistor is shorted.
Thermistor should be replaced.
POWER FAIL RECOVERY
In case of power failure the machine stops running but the time display remains on, showing the time just before
power failure.
Press the START button after the power is restored, then the machine will restart.
Part 8
DEFAULT DRYER SETTINGS
Default
Default Settings
Cycle Time (Minutes)
10~100 Minutes
Cool Down Time Cycle
2 Minutes
High Temperature
154.4° F (68° C)
Medium Temperature
140° F (60° C)
Low Temperature
125.6° F (52.5° C)
Minutes/Minutes and seconds
Minutes
Fahrenheit/Celsius
Fahrenheit
Error Mode
On
17
MEMO
18
MEMO
19
Download PDF

advertising