LG | WD-8030WF | LG WD-8030WF Owner’s Manual

M
K
Machine
Washing
OWNER'S MANUAL
MODEL
:
WD-8030WF
Thank you for purchasing LG Fully Automatic Washer.
Please read your owner's manual carefully, it provides
instructions
on
safe installation,
use
and maintenance.
Retain it for future reference.
Record model number and serial number of
washing
machine.
M
K
P/No.: 3828ER3001L
Product Features
Specification
Power
?
Jumbo Drum
LG's
drum
jumbo
than conventional
improves
can
wash about 40%
machine. A
washing
performance.
the wash
More economical
Fuzzy Logic System
water
Drawer
supply cord is
damaged, it must be replaced
by the manufacturer or its
service agents or similarly
qualified person in order to
avoid
by Fuzzy Logic System
Control
Drum
temperature, and then determines the optimum
washing
consumption.
Drain hose
Lower Cover
time to minimize energy and
Leveling legs
Drain
Child-Lock
Temp.
Eco
By sensing
plug
Power
during operation.
Low noise
Lower
Emergency
Name
The Child-Lock system has been developed to
prevent children from pressing any button to change
the program
panel
Door
Drain pump filter
Water
hazard.
a
(For detergent and
fabric softener)
detects the amount of load and
water level and
water
per load
bigger drum
more
plug
If the
speed control system
the amount of load and balance, evenly
spinning noise level.
supply
Front
:
220-240V, 50Hz
600mm(W)
67kg
7.0kg
loading washing
machine
Size
:
Weight
Wash capacity
Heating
Wash speed
Spin speed
Water consumption
:
:
67L(9.6L/kg)
Permissible water pressure
:
Accessories
:
0.3-10kgf/cm2 (30-1000kPa)
Inlet hose (1EA), Spanner(1EA)
The appearance and
:
cap
door release
:
:
cover
×
600mm(D)
×
850mm(H)
2200W
45rpm
:600/800rpm
:
specifications
may be varied without notice to raise the units
quality.
distributes load to minimize the
Contents
Product Features
Specification
Auto Restart
Although
the
washing
..............................................................................................................
.....................................................................................................................
2
3
Installation......................................................................................................................... 4
machine is turned off
in its
power failure, it restarts automatically
process when power is supplied again.
by a
stopped
Warnings............................................................................................................................6
7
Preparing your laundry / Adding detergent
.......................................................................
Function of each button
How to
use
your
....................................................................................................
washing
machine
.................................................................................
8
10
.....................................................................................................................12
Maintaining
Trouble-shooting guide
...................................................................................................
14
3
2
P/No.3828ER3001L
P/No.3828ER3001L
Installation
Removing the transit bolts
?
To
er,
protect the washer during transportation, the special 4 bolts are locked. Before operating the washremove the bolts. (If they are not removed, it may cause heavy vibration, noise and malfunction)
1. Locate the 4 bolts that
secures
2. Unscrew the 4 bolts with
a
Keep
1. Unscrew the
fixing
screw
to attach the faucet.
2. Push the connector up till
the rubber packing is in
faucet. Then
provided.
spanner
4
the transit bolts and spanner for future
use.
Upper
Rubber
Connector
packing
3. Push the water
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the faucet and then tighten it
by screwing it to the right.
contact with the
tight
the washer.
3. Take out the 4 bolts
4.
the inlet hose
Connecting
the
tighten
screws.
Rubber
packing
Upper
?
If the
is
appliance
supplied
the cord, extension set
not
?
If
subject
to
or
splashing
from
a
cord extension set
electrical
or
ingress
portable
or
electrical
outlet device should
portable
be positioned
so
it is
of moisture.
stationary appliance is provided with a supply cord and a plug, the
state that the appliance must be positioned so that plug is accessible.
a
Upper
Connector
outlet device
Fixing
Connector
Plate
screw
Water
hose
instructions shall
supply
Used the horizontal faucet
Level
?
Horizontal faucet
adjustment
If the washer is not
levelled, it could
cause
noise
or
1. Select
a
Hose connector
vibration.
place for
?
Place it at
?
Place it
a
firm and
more
Extension faucet
installation
even
floor.
than 2cm away from the wall
Square
2. Check the gap
Leveling leg
?
Lower
Higher
Ensure all feet
3. After
firmly on the floor.
the level, check it by
the
faucet
?
Make
sure
the level if necessary.
opening
by carpeting
washing machine is installed on a carpeted floor.
must not be obstructed
?
only
sure
that there
are no
not crushed.
when
Connecting
the inlet hose
Two
(How
to connect the hose of screw
rings
are
supplied
type.)
with the water inlet hose in the
prevent
water leaks.
Do not
If the
Connect the machine to
an
the exclusive AC 220
--
manufacturer
after
or
its service
using.
ground
240V outlet with
terminal.
Water drain
?
Make
valve connector in order to
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
with
comes
kinks in the hose and that it is
?
?
Your machine
cold water connection.
the
Electrical connection
?
?
?
shaking
Leveling leg
?
that the rubber seal
is inside the hose connector.
are
adjusting
washer. Readjust
The base
Rubber seal
Hooked
over
the
edge
agents
or
similarly
?
a
sink
using
the
plastic
hose
with
comes
Connect to cold water
?
Check water
by turning
?
of
Your machine
only cold water connection.
using the inlet valve.
tightness of washing
tap completely on.
machine connections
the
Periodically
check the condition of the hose and
replace
the hose if necessary.
hanger supplied
with the machine.
?
Make
sure
there
Secure the hose
?
are no
so
kinks in the hose and that it is
that it
can
The drain hose should not be
not be
no
while the
dislodged
placed higher than
?
crushed.
appliance
is
running.
Make
sure
that there
are no
kinks in the hose and that it
is not crushed.
85cm above the floor.
4
5
P/No.3828ER3001L
P/No.3828ER3001L
Warnings
Preparing
You must read the whole of this
?
instruction book before you use the
appliance. Follow the advice carefully.
Keep
make
the
?
following warning are provided in
the interests of overall safety. You
must read them before the appliance is
The
?
This
or
used.
is
appliance
to be used
by
?
It is
this
?
?
or
with the
This
appliance is heavy.
when moving it.
All
occur
of
?
Any
damage
cian
?
or a
Make
?
its electrical
?
water
?
?
the feet to
Always unplug
tap after
the
?
on
Avoid electric
Don't
sprinkle
tric shock.
that air
can
cir-
designed
to be
doubt, follow the instruc-
or
is
designed
was
Do not
Use
Washing
use.
-
Heavy soiled
-
Temperature
Pre wash
Main wash
It
Normal soiled
designed.
used, make
sure
with
as
near
cold
:
cold
Coloured cottons
:
cold
Synthetics
:
cold
Delicate fabrics
:
cold
Woollens
:
cold
still
see
?
ignitable
Where to
etc. or inflamma?
?
slightly ajar
between
place
Pull out the
the
40°C
-
40°C
-
detergent
detergent and fabric
softener in the detergent drawer
before washing.
Close the detergent drawer
completely.
The drawer for fabric softener
Put the
?
Do not leave the fabric softener in the
detergent drawer
days. (Fabric softener could harden)
Do not open the detergent drawer during water fill cycle.
Softener will automatically add during last rinsing cycle.
for
MAX
?
?
more
than 2
?
Do not fill
?
Do not
past MAX indicator.
solvents (trilen, benzine, etc.)
use
Softener level
Detergent
for
MAIN-WASH
()
Fabirc
Detergent
for
?
SOFTENER
PRE-WASH
()
()
?
Programmes
with PRE-WASH
MAIN-WASH
only
use.
The
glass door becomes very hot during washing. Keep children away from the appliance while
?
use.
?
You should not
attempt
product
repair
by inexperienced
cause injury and/or
out
should be serviced
only,
and
by an authoonly genuine
should be used.
or
Choosing the right detergent
Do not exceed manufacturer's recommended
The
dosages
?
?
disposing of your old washing machine,
the electric cable must be cut off and the door
a
death
inoperative
trap for
a
degree
and
on
depend
the
detergent package.
:
according
:
?
on
type of soiling
size of wash
-part load
thus
to manufacturer's instructions
type of detergent depends on
type of fabric
(cotton, synthetic, delicate items, wool)
the
?
colour
?
wash
?
temperature
and type of soiling
degree
3/4 of the normal amount
-minimum load
to avoid it
child.
shown
as
The amounts
When
becoming
detergent should be used according to the instruction of the detergent manufacturer.
detergent is used over the recommended amount too many bubbles will be generated
causing an inferior washing result. This will also cause a malfunction.
Use front loader detergent only for drum washing machine.
If the
Detergent dosages
-full load
catch must be made
The
the machine
to
serious faults to the machine.
spare parts
?
60°C
-
water.
rized Service Centre
deform the machine.
60°C
-
detergent
drawer.
Pets and children may climb into the washing
machines. Check you appliance each time
This
95°C
-
Adding detergent
Before you open the door of the machine check
that the water has drained. Do not open the door
can
95°C
-
materi-
quantities of fabric
amout could damage the
door
:
cleaning
they are
?
porthole
Main wash
Heavily soiled cottons
Normally soiled cottons
that
the recommended
Leave the
-
saturat-
the fabric before it is
places
gasoline, benzene,
operate
are
If volatile
petroleum products.
only
more
etc. near the
water. It may cause a fire or elec-
for domestic
Do not machine wash fabrics which
yourself. Repairs carried
unqualified persons may
the label of the item itself.
ignite
appliance
it is in
appliance.
are
Soiled condition
?
?
and turn off the
heaters, candles,
machine. It may
?
carpeted floor,
ensure
use.
machine washed. If in
tion you find
on
?
wash fabrics which
This
before
on a
appliance
Do not overload the
Only
does not stand
damage.
laundry stained with edible oil,
machine oil, dry-cleaning oil, gasoline, etc. It
may cause fire or explosions.
if you
?
cable.
supply
If the machine is situated
please adjust
culate freely.
?
appliance
pocket for any articles (coin, safety pin, paper clips, etc.)
zips and fasten button or hooks: loose belt or ribbons should be tied togather.
Never wash whites and coloureds together.
Follow the wash code symbols on each garment label and manufacturer's washing instructions.
washes to preserve the door seal.
required to install this applicarried out by a qualified electri-
that the
as
laundry.
competent person.
sure
such
stones can cause extensive
softener. An excessive
if this is not done.
should be
Close
are
ble gas leak. Due to volatile nature of these
material, It can cause fire or explosions.
electrical work
ance
Check
?
Do not wash
al such
?
Any plumbing work required to install this
applinance should be carried out by a qualified
plumber or a competent person.
?
empty. Hard,
coins, safety pins, nails,
pockets
thoroughly removed from
placed in the appliance.
?
?
that all
sure
ed with
Care should be taken
is used. Serious
or
?
fluids have been
con-
and transit bolts must be removed
packaging
before the appliance
Make
for which it
product.
dangerous to modify the specifications
appliance in any way.
may
?
play
extension cord
use an
laundry
must not be used for purposes other than those
adults.
Children should not be allowed to touch the
trols
?
?
designed
adapter.
screws or
new owner.
installed
double
sharp objects
give away the appliance,
that the book is passed to
or
sure
ground
terminal. Do not
?
?
the book for future reference.
If you sell
Use the exclusive AC 220V-240V outlet with
your
(about 1kg)
:
1/2 the amount
Note
:
Use
appropriate detergents only
for wool.
usedfor full load
?
water hardness in your area.
6
7
P/No.3828ER3001L
P/No.3828ER3001L
Function of each button
Rinse hold
Water temperature selector
If you desire to leave your fabrics in the
machine without spinning after rinse to prevent
?
?
?
them
?
getting wrinkled,you may select Rinse
Hold function pressing the Rinse button.
To drain and spin, press the Rinse button to
turn off the Rinse Hold lamp.
Press the button to select water
The water
[40°C
?
temperature
60°C
can
Cold] during
program.
95°C is selected
only
temperature.
?
be selected
6 programs
on
Coloreds
?
for Whites program.
?
If the
800
60°C
Rinse Hold
Super
Main
Normal
95°C
600
no
Spin
can
?
of the
?
?
or
pause wash cycle.
The power turns off
automatically
automatically.
By pressing the button,
[Coloreds Whites
Rapid
Delicate Wool Synthetic]
the pause button is
Press the button to
turn on and off.
4 minutes after
pressed.
be selected.
Coloreds
Synthetic
Eco
Whites
Wool
Child Lock
Rapid
Delicate
Start
40°C
Cold
Use the button to start
Coloreds program is set
can
Pre
be set
depending
type
laundry.
power button is pressed, the
the
Pause
Door
Rinse
Wash
For manual wash, rinse and
spin speed
?
method,
?
When
lamp
is
?
no
selection has been
made.
?
Prewashing
is available for
Whites, Synthetic program.
Coloreds,
Program
Eco
Temp.
Door Lock
The Child Lock
system can be programmed and
by pressing both [Water Temp.] and
[Eco]buttons simultaneously. Once this system is
set, all button are inoperable work during operation.
(Child Lock Lamp is on when it is selected)
canceled
change washing
method and spin speed.
off,
Water
Child lock
Use these buttons to
rinse
Spin
Open
?
The Child Lock
system
can
be set at any time
even
including during Power-Off, on Pause and operation.
It is automatically cancelled when operational error
occurs and when end of the cycle ends.
?
If you push the Eco button in while
Whites program, Eco function is
?
selected. Eco function
almost the
same
gives you
washing effect as
that in 95˚C with less energy
It shows whether the door
can
be open
or
the
?
washing cycle.
light is off, the
can be opened.
If the
?
?
door
Press the button to open
the door.
during
not
Only operate when
plug is connected.
power
consumption
8
9
P/No.3828ER3001L
P/No.3828ER3001L
How to
The whole
If
no
use
washing
your
washing process
is carried out
automatically
programme is selected clooreds program will
In
of automatic
case
1. Press
just
one
touch.
3. Press the
?
to start the
washing
the
washing
program
If the
To
preferred
?
1. Press
[Power] button.
Whites
Rapid Delicate Wool Synthetic.
appear in order by pressing the [Program] button.
cycle.
the amount of the
after the alarm sound.
in Child Lock mode.
you want to lock all the buttons to prevent
this option.)
(If
can use
laundry.
washing
is
change settings
Child Lock
you
of
by detecting
washing completed, power turns off automatically
Press the [Door Open] button and take out the laundry.
Switch off the appliance and turn off the water tap.
?
is detected.
is carried out
Completion
?
machine.
button to start the
[Start/Pause]
optimum washing
912
63
?
change
The
washing
3. The coloreds program is carried out automatically.
The optimum wash programme is selected once the load
To
with
commence.
button.
[Power]
Press the [Start/Pause] button
2.
machine
a
child from
setting,
2. Coloreds
will
Make
?
adjustment
to water
temperature, rinse
or
The Child Lock system
to suit your wash needs
spin cycles
The time
?
required
can
be
slightly changed according
to the
laundry amount,
water
supply
and water
temperature.
?
Pro-
?
gram
Coloreds
Whites
Rapid
(Below 2.5kg)
Delicate
(Below 2kg)
Wool
Synthetic
Color fast garments (shirts, night
dresses, pajamas) and lightly
soiled white cotton
(underwear...)
First check if the laundry is
machine washable. White cottons
and linen (towels, sheets...)
quick washing of less dirty
laundry or frequently used towels.
Select the function to change rinse, spin and water
(
) indicates choice that can be manually taken.
Rinse
Spin
Main wash
3 times
800
(Pre
+
Main)
Main wash
(Pre
+
Main)
For
Delicate
laundry easily shaped
damaged. (Silk, curtains...)
Main wash
or
Main wash
Polyammide, Acrylic, Polyester
Main wash
Only machine washable woolens
with pure new wool label.
Main wash
(Pre
+
Main)
(super 4times)
(600,
3 times
(super 4times)
2 times
(super 3times)
Spin)
no
no
Spin)
600
(800,
no
Spin)
3 times
600
(super 4times)
(no Spin)
2 times
600
(super 3times)
(no Spin)
3 times
800
(super 4times)
(600,
no
time
Temp.
800
(600,
Washing
Spin )
about
hours &
46 minutes
3.
In
?
?
?
?
both
button.
the desired program
and press the [Start/Pause]
Water
Temp
Start
Eco
Pause
Change
the
program
Start
Pause
button.
one
about
2 hours &
20 minutes
If you want to deacitvate Child-Lock during wash
[Eco] buttons simultaneously again.
about
?
46 minutes
If the
light
turns on, the door can not be
cycle, press
both
[Water Temp.] and
opened.
Door Lock
about
one hour &
49 minutes
about
45 minutes
about
hour &
46 minutes
Auto Restart
one
in others because
Coloreds,
?
[Start/Pause]
Change
?
[More convenient manual operations of Coloreds program]
It is more convenient to operate manually in Coloreds program than
Coloreds program is firstly set with power on.
be
If you want to change the program when the Child Lock is on,
1. Press both [Water Temp.] and [Eco] buttons simultaneously.
2. Press the
temperature.
Water
Wash
[Water Temp.] and
by pressing
these buttons.
programmed and cancelled only by pressing
[Eco] buttons simultaneously.
can
?
Although the washing machine is turned off by a power failure, it restarts
automatically in its stopped process when power is supplied again and the process
is properly adjusted.
And it will be the same when the machine unplugged in operation is plugged in
again.
When you want wash
When you want rinse
only, press the [Wash] button to select the washing method.
only, press the [Rinse] button to select the rinsing method.
When you want spin only, press the [Spin] button to select the spin speed.
When you want Wash & Rinse only, press the [Wash] button and [Rinse] button respectively to select each method.
When you want Rinse & Spin only, press the [Rinse] button and [Spin] button respectively to
select each method.
11
10
P/No.3828ER3001L
P/No.3828ER3001L
Maintaining
Remove the power
Clean the filter
plug prior to maintaining.
periodically every 3 months.
Clean the filter in the inlet valve
?
If
?
Remove the
1
no
water flows
through filter and
inlet hose completely
Turn off the water
To prevent
is
clogged with foreign material,
before cleaning the filter.
taps.
2
water is not
Take out the power
charged.
plug
from the outlet.
1
being frozen
Turn off the water tap and
hose.
remove
in winter
the inlet
2
Drain water in the machine
using
drain
plug ( ).
1
3
Disconnect the inlet hose.
4
Remove the filter with
take out
foreign
a
material
tool
or
using
by
hand and
toothbrush.
a
When the machine is frozen
1
Pour hot water
(about 50°C)
faucet and
on
2
the
remove
the inlet hose.
Insert it in
?
Cleaning
1
Open
using
the filter
coin.
by
2
Take out the drain
3
plug( ),
then the water flows out. If
the water does not flow any
more, turn the drain pump fil-
ter( )
to the left until it is
(about 50°C)
3
After
cleaning,
Pour the hot water
4
in the drawer and
maintain it for 10 minutes
for
Take out any foreign material
from the drain pump filter( ).
Connect the inlet hose
to the water
tap and
check the drain after
turning on the water tap
and operating the
washing machine.
melting.
turn the drain
pump filter( ) clockwise and
insert the drain plug( ) to
the
open.
in hot water
original place.
the drain pump filter
cover
Submerge the
separated hose
original place.
Close the Lower
cover
cap.
Maintenance of the drawer
1
coin
Pull out the drawer.
2
Wash it
clearly
3
Insert it in its
original
place.
MAX
2
1
2
1
MAX
1
12
13
P/No.3828ER3001L
P/No.3828ER3001L
Check the
following before asking
washing, rinsing or spinning.
Request
for the service center
Symptom
or
for service if the
agent in the
Check
case
error
of failure
or
Is the water
?
Is the water frozen?
displayed during
damage except
for the
followings.
Solution
points
?
Pre
massage is
tap turned off ?
?
Turn the water
?
Melt it with 50°C hot water.
tap
on.
Refer
Main
?
Is the water pressure low
filter clogged ?
or
the
?
Solution
points
Coloreds
It is
Whites
displayed
when the water pressure
?
sensormalfunction.
Rapid
?
Close the water
tap.
Take out power
plug.
the filter and
Separate
the
remove
Check
Symptom
foreign
material.
Synthetic
Wool
Refer
It is
displayed
?
Call the service center.
Did you press the power button.
?
Turn it
Is the power
?
when the water overfills due to abnor-
mal water inlet valve.
Delicate
?
Is the
laundry
tilted to
one
side
in the drum?
?
?
Spread
the
laundry evenly.
by
The machine
the start button. If it
does not
Release imbalance
pressing
happens after rinsing or spinning, call the service centre.
Rinse Hold
Super
?
on.
start up.
Normal
?
?
Is the washer leveled ?
?
Install it
Is there
?
Remove
foreign
material in the
on a
?
flat surface.
foreign
plug unplugged?
Plug
it in.
material.
drain pump ?
?
Is the short-circuit breaker turned
?
Turn it
on.
off?
800
?
Is the drain hose bent
or
higher
than 85cm above the floor ?
600
?
Is the hose
?
Is the hose frozen ?
clogged
?
Put the drain hose
?
Place the drain hose under
evenly.
85cm from the floor.
?
No Spin
Excessive suds
?
?
Melt it with 50°C hot water.
?
Door is
faulty
detergent
than
?
Put the recommended
amount.
Did you put low sud detergent on
the front loading washing machine.
?
Use
front
detergents only for
loading washing
machine.
?
Did you run the washer while
the door is not closed
completely?
?
?
Take out the power plug.
Call the service center or
?
Close the door.
If it is not
released, call the
service center.
Door Lock
Water is not heating
95¡C
60¡C
40¡C
Did you put more
recommended?
Excessive
vibration and
noise.
?
?
?
agent.
Did you
remove
the transit bolts?
Is the washer levelled?
Is the drain pump
foreign material ?
clogged
with
?
Remove it.
?
Place it
?
Remove
on an even
foreign
floor.
material
from the drain pump.
Refer
Cold
14
15
P/No.3828ER3001L
P/No.3828ER3001L
Download PDF

advertising