LG | WD-8052X | LG WD-8052X Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODEL
:
WD-8050F/8052X
Thank you for purchasing LG Fully Automatic Washer.
Please read your owner's manual carefully, it provides
instructions
on
safe installation,
use
and maintenance.
Retain it for future reference.
Record model number and serial number of
washing
machine.
M
K
P/No.: 3828ER3001M
Product Features
Specification
Power
?
Jumbo Drum
LG's
jumbo
drum
can
it
the
per load
A
machine.
bigger drum
Fuzzy Logic System
water
temperature, and then determines the optimum
washing
consumption.
Control
Drum
time to minimize energy and
panel
Lower Cover
Leveling legs
Drain
The Child-Lock system has been developed to prevent children from pressing any button to change the
By sensing
a
Door
Drain hose
Child-Lock
during operation.
Low noise
its service
Drawer
Lower
Drain pump filter
programme
or
similarly qualified
person in order to avoid
hazard.
(For detergent and
fabric softener)
by Fuzzy Logic System
or
detects the amount of load and
water level and
water
agents
more
washing
wash performance.
More economical
supply cord is damaged,
must be replaced by the
manufacturer
wash about 40%
than conventional
improves
plug
If the
speed
WD-8050F
Front
the amount of load and balance, evenly
spinning noise level.
distributes load to minimize the
WD-8052X
loading washing
600mm(W)
Weight
Wash capacity
Heating
Wash speed
Spin speed
Water consumption
×
600mm(D)
67kg
×
850mm(H)
7.0kg
6.0kg
2200W
45rpm
400/600/800rpm
67L(9.6L/kg)
Permissible water pressure
Accessories
The appearance and
machine
220-240V, 50Hz
supply
Size
control system
cap
plug
Name
Power
cover
specifications
67L(11.2L/kg)
0.3-10kgf/cm2 (30-1000kPa)
Inlet hose (1EA), Spanner (1EA)
may be varied without notice to raise the units
quality.
Contents
Product Features ..........................................................................................................2
Auto Restart
Although
the
washing
machine is turned off
power failure, it restarts automatically in its
process when power is supplied again.
by
stopped
a
Specification
................................................................................................................
3
Installation.................................................................................................................... 4
Warnings.......................................................................................................................6
7
Preparing your laundry / Adding detergent
..................................................................
Function of each button
How to
...............................................................................................
machine
8
10
your washing
Maintaining ................................................................................................................12
14
Trouble-shooting guide
use
............................................................................
..............................................................................................
2
P/No.3828ER3001M
3
P/No.3828ER3001M
Installation
Removing the transit bolts
?
To
er,
Connecting
protect the washer during transportation, the special 4 bolts are locked. Before operating the washremove the bolts. (If they are not removed, it may cause heavy vibration, noise and malfunction)
1. Locate the 4 bolts that
secure
2. Unscrew the 4 bolts with
a
Keep the
fixing
screw
to
attach the faucet.
2. Push the connector up till the
rubber packing is in tight
3. Push the water
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the faucet and then tighten it by
screwing it to the
right.
contact with the faucet.
the washer.
Then
tighten
the 4
screws.
provided.
spanner
Upper
3. Take out the 4 bolts
4.
1. Unscrew the
the inlet hose
Connector
transit bolts and spanner for future
use.
Rubber
packing
Rubber
packing
Upper
Upper
Connector
Connector
Level
?
adjustment
If the washer is not
levelled, it could
noise
cause
or
1. Select
a
Fixing
vibration.
place
?
Place it
on a
?
Place it
more
Water
hose
for installation
firm and
even
?
Ensure all feet
firmly on the floor.
the level, check it
adjusting
washer. Readjust
Lower
Higher
are
3. After
Used the horizontal faucet
by shaking
Horizontal faucet
the
the level if necessary.
The base opening must not be obstructed by carpeting
the washing machine is installed on a carpeted floor.
Leveling should be done within 1.5 degree angle.
Hose connector
when
Extension faucet
Square
Leveling leg
faucet
Rubber seal
?
Make
sure
that the rubber seal
?
is inside the hose connector.
?
?
?
?
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
If the
an
If the
appliance
the exclusive AC 220
is
supplied
the cord extension set
subject
?
If
a
to
splashing
or
or
from
a
electrical
ingress
--
240V
or
its service
agents
or
using.
outlet with ground
terminal.
Connecting
the inlet hose
cord extension set
portable
or
?
of moisture.
rings
stationary appliance is provided with a supply cord and a plug, the
appliance must be positioned so that plug is accessible.
the
edge
of
sink
using
the
that there
are no
plastic
hose
supplied
Your machine
type.)
with the water inlet hose in the
prevent
water leaks.
with
comes
only cold water connection.
using the inlet valve.
instructions shall
?
?
a
are
Connect to cold water
Water drain
over
sure
to connect the hose of screw
valve connector in order to
electrical
outlet device should
portable outlet device,
be positioned so it is not
Two
(How
Check water
by turning
Hook
Make
similarly
after
state that the
?
only
not crushed.
manufacturer
?
?
with
comes
kinks in the hose and that it is
Do not
Connect the machine to
Your machine
cold water connection.
Electrical connection
?
supply
floor.
than 2cm away from the wall
2. Check the gap
Leveling leg
Plate
screw
tightness of washing
tap completely on.
machine connections
the
Periodically
check the condition of the hose and
replace
the hose if necessary.
hanger supplied
with the machine.
?
Make
sure
there
Secure the hose
?
are no
so
?
kinks in the hose and that it is not crushed.
that it
can
The drain hose should not be
4
P/No.3828ER3001M
not be
while the
dislodged
placed higher than
appliance
is
running.
Make
sure
that there
are no
kinks in the hose and that it
is not crushed.
85cm above the floor.
5
P/No.3828ER3001M
Preparing
Warnings
You must read the whole of this
?
instruction book before you use the
appliance. Follow the advice carefully.
Keep
the
?
This
or
used.
?
is
appliance
trols
?
It is
this
?
?
or
designed
to be used
by
with the
appliance is heavy.
when moving it.
All
occur
of
?
plumber
damage
Any
?
Make
sure
that the
water
?
?
the feet to
tap after
the
Only
on
Avoid electric
Don't
sprinkle
ensure
that air
can
cir-
designed
to be
doubt, follow the instruc-
or
P/No.3828ER3001M
was
Washing
use.
-
Heavy soiled
-
Temperature
Pre wash
Main wash
It
Normal soiled
designed.
Do not
operate
used, make
near
sure
places
with
Use
only
cold
:
cold
Coloured cottons
:
cold
Synthetics
:
cold
Delicate fabrics
:
cold
Woollens
:
cold
95°C
-
95°C
-
60°C
-
60°C
-
40°C
-
40°C
-
ignitable
Adding detergent
materi-
Where to
etc. or inflamma?
?
quantities of fabric
amout could damage the
door
:
cleaning
they are
?
porthole
Main wash
Heavily soiled cottons
Normally soiled cottons
that
the recommended
Leave the
-
saturat-
the fabric before it is
gasoline, benzene,
as
are
If volatile
petroleum products.
slightly ajar
between
place
Pull out the
the
detergent
drawer.
detergent
detergent and fabric
softener in the detergent drawer
before washing.
Close the detergent drawer
completely.
The drawer for fabric softener
Put the
?
Do not leave the fabric softener in the
more
?
MAX
than 2
Do not open
?
Softener will
?
Do not fill
?
Do not
detergent drawer for
days. (Fabric softener could harden)
the detergent drawer during water fill cycle.
automatically add during last rinsing cycle.
past MAX indicator.
use
solvents
(trilen, benzine, etc.)
Softener level
Before you open the door of the machine check
that the water has drained. Do not open the door
can
still
see
water.
Pets and children may climb into the washing
machines. Check you appliance each time
?
?
You should not
Detergent for
SOFTENER
PRE-WASH
()
()
?
Programmes
with PRE-WASH
?
MAIN-WASH
only
attempt
product
repair
by inexperienced
cause injury and/or
out
should be serviced
only,
and
by an authoonly genuine
should be used.
or
Choosing the right detergent
Do not exceed manufacturer's recommended
The
dosages
?
?
disposing of your old washing machine,
the electric cable must be cut off and the door
death
inoperative
trap for
a
degree
and
on
depend
the
detergent package.
:
according
:
?
on
type of soiling
size of wash
-part load
thus
to manufacturer's instructions
type of detergent depends on
type of fabric
(cotton, synthetic, delicate items, wool)
the
?
colour
?
wash
?
temperature
and type of soiling
degree
3/4 of the normal amount
-minimum load
to avoid it
child.
shown
as
The amounts
When
a
detergent should be used according to the instruction of the detergent manufacturer.
detergent is used over the recommended amount too many bubbles will be generated
causing an inferior washing result. This will also cause a malfunction.
Use front loader detergent only for drum washing machine.
If the
Detergent dosages
-full load
catch must be made
The
the machine
to
serious faults to the machine.
spare parts
?
?
use.
rized Service Centre
deform the machine.
Fabirc
MAIN-WASH
use.
glass door becomes very hot during washing. Keep children away from the appliance while
This
Detergent for
()
The
becoming
6
for domestic
designed
Do not machine wash fabrics which
more
etc. near the
water. It may cause a fire or elec-
tric shock.
is
yourself. Repairs carried
unqualified persons may
the label of the item itself.
ignite
appliance
it is in
appliance.
are
Soiled condition
?
?
and turn off the
heaters, candles,
machine. It may
?
carpeted floor,
use.
machine washed. If in
?
on
?
wash fabrics which
tion you find
on a
appliance
Do not overload the
This
before
If the machine is situated
Always unplug
does not stand
?
cable.
supply
please adjust
culate freely.
?
appliance
damage.
laundry stained with edible oil,
machine oil, dry-cleaning oil, gasoline, etc. It
may cause fire or explosions.
if you
competent person.
its electrical
?
required to install this applicarried out by a qualified electri-
should be
or a
pocket for any articles (coin, safety pin, paper clips, etc.)
zips and fasten button or hooks: loose belt or ribbons should be tied together.
Never wash whites and coloureds together.
Follow the wash code symbols on each garment label and manufacturer's washing instructions.
washes to preserve the door seal.
electrical work
ance
cian
as
laundry.
?
?
?
such
stones can cause extensive
softener. An excessive
competent person.
or a
Close
are
ble gas leak. Due to volatile nature of these
material, It can cause fire or explosions.
work
should be
ance
Check
?
Do not wash
al such
?
required to install this applicarried out by a qualified
?
empty. Hard,
coins, safety pins, nails,
pockets
thoroughly removed from
placed in the appliance.
if this is not done.
Any plumbing
that all
sure
ed with
Care should be taken
is used. Serious
or
?
fluids have been
con-
and transit bolts must be removed
packaging
before the appliance
Make
for which it
product.
This
extension cord
use an
laundry
must not be used for purposes other than those
adults.
dangerous to modify the specifications
appliance in any way.
may
?
play
?
?
Children should not be allowed to touch the
adapter.
screws or
The
installed
double
sharp objects
new owner.
following warning are provided in
the interests of overall safety. You
must read them before the appliance is
ground
terminal. Do not
?
?
the book for future reference. If
you sell or give away the appliance,
make sure that the book is passed to
Use the exclusive AC 220V-240V outlet with
your
(about 1kg)
:
1/2 the amount
Note
:
Use
appropriate detergents only
for wool.
used for full load
?
water hardness in your area.
7
P/No.3828ER3001M
Function of each button
Error
The
?
display
an error.
?
no
inlet
:
14
blinks if there is
?
Refer
supply.
:
The
laundry
tilted to
?
no
drain
:
It shows whether the door
?
?
the Rinse button.
?
?
Use these buttons to
method, rinse
change washing
method and spin speed.
When
off,
lamp
is
no
selection has
Prewashing
is available for
be set and
?
and
?
are
Child Lock
even
system can be set anytime
during Power-off, on pause and
5 programs
the
inoperable.
?
can
be set
depending
on
?
type of the laundry.
Use the button to start
wash
If the power button is pressed.
Coloreds program is automatically
?
or
?
pause
cycle.
Press the button to turn power
and off.
on
The power turns off
automatically
4 minutes after the pause button
is
set.
?
operation.
It is automatically cancelled when an
operational error occurs and when the
cycle ends.
pressed.
By pressing the button, [Coloreds
Whites
Delicate
Synthetic
can
be
selected.
Wool]
Water temperature selector
?
?
Press the button to select water
temperature.
The water temperature [40°
60°C
Whites, Synthetic program.
P/No.3828ER3001M
spin speed
can
Once Child Lock is set, all button
been made.
?
8
?
?
For manual wash, rinse and
system
by pressing both [Eco]
[Rapid] button simultaneously.
spin, press the
Rinse button to turn off the
lamp.
Child Lock
canceled
To drain and
Hold
be
opened or not.
When the lamp is on, the
door can't be opened.
can
pressing
side.
lamp
?
select rinse hold function
is
If the drain pump
filter is clogged.
Door lock
?
one
If you desire to leave your fabrics in the machine without
spinning after rinse to prevent
them getting wrinkled, you may
Trouble with water
imbalance
?
Child Lock
Rinse hold
display
Coloreds,
?
Cold] can be selected in
Coloreds, Synthetic program.
95°C is selected for Whites only.
?
If you push the Eco button in Whites program, Eco
function is selected. Eco function gives you almost
the
washing effect
consumption
same
energy
as
that in 95˚C with less
?
If you push the Rapid button in Coloreds or Synthetic
program, Rapid function is selected. Rapid function
reduces the whole time including the washing and
rinsing
time about
by
half
an
hour.
9
P/No.3828ER3001M
How to
The whole
If
no
In
use
your
washing process
washing
is carried out
machine
automatically
programme is selected Coloreds program will
case
of automatic
with
just
one
touch.
?
washing
[Power] button. Coloreds program is automatically
Press the [Start/Pause] button to start the washing machine.
1. Press the
2.
3. The coloreds program is carried out.
The optimum wash program is selected once
washing
set with power
on
?
Make
adjustment
The time required
programme
preferred
?
can
be
temperature, rinse
?
?
To
(
Coloreds
Whites
garments (shirts, night
dresses, pajamas...) and lightly
soiled white cotton
(underwear...)
First check if the laundry is
machine washable.
White cottons and linen
(towels, sheets...)
Synthetic
Polyamide, Acrylic, Polyester
(Below 4.0kg)
Delicate
(Below 3.0kg)
Delicate
laundry easily damaged.
(Silk, curtains...)
+
Main)
Main wash
(Pre
+
Main)
Main wash
(Pre
+
Main)
Main wash
[Eco]
Washing
(Below 2.0kg)
Machine washable woollens with
pure new wool only.
Main wash
Normal
800
40°C
(Super, Hold)
(400, 600)
(Cold, 60°C)
about
one hours &
46 minutes
Normal
800
(Super, Hold)
(400, 600)
95°C
2 hours &
Normal
800
(Super, Hold)
(400, 600)
(Cold, 60°C)
Normal
400
Cold
(Super, Hold)
(600)
(40°C)
Normal
400
Cold
(Super, Hold)
(600)
(40°C)
about
20 minutes
?
?
?
?
laundry.
washing
is
completed, power turns off automatically
appliance and turn off the water tap.
change settings
after the alarm sound.
and
in Child
-
Lock mode.
you want to lock all the buttons to prevent
this option.)
(If
can use
Press both
2.
Press the
3. Change
the
[Rapid]
buttons
a
child from
setting,
programmed and cancelled only by pressing both
simultaneously. If you want to change the program when
can
be
about
hour &
9 minutes
buttons
simultaneously.
button.
Change
the program
the program and press
button.
If the
light
during
wash
turns on, the door can not be
cycle, press
both
[Eco]
and
[Rapid]
opened.
Auto Restart
about
45 minutes
?
only, press the [Wash] button to select the washing method.
When you want rinse only, press the [Rinse] button to select the rinsing method.
When you want spin only, press the [Spin] button to select the Spin speed.
When you want Wash & Rinse only, press the [Wash] button and [Rinse] button respectively
[Rapid]
[Start/Pause]
?
one
than in others
and
If you want to deactivate Child-Lock
button simultaneously again.
one
convenient manual
[Eco]
[Start/Pause]
about
hours &
46 minutes
40°C
operations of Coloreds program]
It is more convenient to operate manually in Coloreds program
because Coloreds program is firstly set with power on.
In Coloreds,
[More
Switch off the
1.
?
Wool
?
washing
of
cycle.
the amount of the
by detecting
the Child-Lock is on,
change wash, rinse, spin and water temperature.
) indicates choice that can be manually taken.
Main wash
(Pre
If the
is carried out
The Child-Lock system
or
time
Color fast
?
Child-Lock
you
spin cycles to suit your wash needs by pressing these buttons.
slightly changed according to the laundry amount, water supply and water temperature.
to water
Completion
To
[Power] button.
Press the [Program] button. By additional push, each light of the programs on the control panel will
be turned on in order as follows. [Coloreds
Whites
Synthetic Delicate Wool Coloreds]
?
button to start the
[Start/Pause]
optimum washing
912
63
1. Press the
2.
The
the load is detected.
?
To get the
3. Press the
commence.
Although the washing machine is turned off by a power failure, it restarts automatically in its stopped process when power is supplied again and the process is properly adjusted.
And it will be the
same
when the machine
unplugged
in
operation
is
plugged
in
again.
When you want wash
to select
each method.
?
When you want Rinse &
each method.
10
P/No.3828ER3001M
Spin only,
press the
[Rinse]
button and
[Spin]
button
respectively
to select
11
P/No.3828ER3001M
Maintaining
Remove the power
Clean the filter
plug prior to maintaining.
periodically every 3 months.
Clean the filter in the inlet valve
?
If
?
Remove the
1
no
water flows
through filter and
inlet hose completely
Turn off the water
To prevent
is
clogged with foreign material,
before cleaning the filter.
taps.
2
water is not
Take out the power
charged.
plug
from the outlet.
1
being frozen
Turn off the water tap and
hose.
remove
in winter
the inlet
2
Drain water in the machine
using
drain
plug ( ).
1
3
Disconnect the inlet hose.
4
Remove the filter with
take out
foreign
a
material
tool
or
using
by
hand and
toothbrush.
a
When the machine is frozen
1
Pour hot water
(about 50°C)
faucet and
on
2
the
remove
the inlet hose.
Insert it in
?
Cleaning
1
Open
using
the filter
cover
by
2
Take out the drain
3
plug( ),
then the water flows out. If
the water does not flow any
more, turn the drain pump fil-
ter( )
to the left until it is
(about 50°C)
3
After
cleaning,
Pour the hot water
4
in the drawer and
maintain it for 10 minutes
for
Take out any foreign material
from the drain pump filter( ).
Connect the inlet hose
to the water
tap and
check the drain after
turning on the water tap
and operating the
washing machine.
melting.
turn the drain
pump filter( ) clockwise and
insert the drain plug( ) to
the
open.
in hot water
original place.
the drain pump filter
coin.
Submerge the
separated hose
original place.
Close the Lower
cover
cap.
Maintenance of the drawer
1
coin
Pull out the drawer
upward.
slightly
2
Wash it
clearly
3
Insert it in its
original
place.
MAX
2
1
2
12
P/No.3828ER3001M
1
MAX
1
13
P/No.3828ER3001M
Check the following before asking for service if the error massage is displayed during
washing, rinsing or spinning.
Request for the service center or agent in the case of failure or damage except for the followings.
Symptom
Check
Solution
points
?
Is the water
?
Is the water frozen?
tap turned off ?
?
Turn the water
?
Melt it with 50°C hot water.
tap
Check
Symptom
on.
It is
displayed
sensor
Solution
points
when the water pressure
?
malfunction.
Close the water
tap.
Take out power
plug.
Refer
?
?
Is the water pressure low
filter clogged ?
or
the
?
Disconnect the inlet hose
and clean the filter.
It is
Is the
laundry
tilted to
one
side
in the drum?
?
?
?
Is the washer leveled ?
?
Spread
?
Call the service center.
Did you press the power button.
?
Turn it
Is the power
Is the power
?
when the water overfills due to abnor-
mal water inlet valve.
Refer
?
displayed
the
laundry evenly.
by pressing
the [Start/Pause] button. If it
happens after rinsing or spinning, call for service.
Release imbalance
Install it
on a
film and
The machine
does not
?
on.
start up.
?
even
?
floor.
plug unplugged?
supply correct?
?
it to power supply.
Use exclusive AC220
240V
Plug
--
outlet with
?
Is there
foreign
material in the
?
Clean and
remove
ground
terminal.
foreign
material from drain filter.
drain pump ?
?
Is the short-circuit breaker turned
?
Turn it
on.
off?
?
Is the drain hose bent
or
higher
than 85cm above the floor ?
?
Is the hose
?
Is the hose frozen ?
clogged
?
Put the drain hose
?
Place the drain hose under
evenly.
85cm from the floor.
?
Excessive suds
?
?
Melt it with 50°C hot water.
?
Door is
faulty
?
Did you
the
run
the washer while
door is not closed
?
than
?
Put the recommended
amount.
Use detergents only for front
loading washing machine.
Did you use low suds detergent for
the front loading washing machine?
?
Did you
?
Remove it.
?
Place it
?
Remove
released, call for
service.
Excessive
vibration and
noise.
Water is not heating
?
?
?
?
detergent
Close the door.
If it is not
completely?
Did you use more
recommended?
Unplug the power
call for service.
plug
and
?
remove
the transit bolts?
Is the washer levelled?
Is the drain pump
foreign material?
clogged
with
Is the washer loaded with excessive
?
on an even
foreign
floor.
material from
the drain pump.
Refer
Remove the excessive loads.
clothes?
14
P/No.3828ER3001M
15
P/No.3828ER3001M
Download PDF