LG | CRD-8480B | Owner's Manual | LG CRD-8480B Owner’s Manual

LG CRD-8480B Owner’s Manual
CD-ROM DRIVE
MODEL
:
CRD-8480M
OWNER'S MANUAL
BEDIENUNGSHANDBUCH
MODE D'EMPLOI
MANUALE D'USO
MANUAL DE USUARIO
To
enjoy fully
all the features and functions of your CD-ROM
carefully and completely.
Drive,
Please read this Owner's Manual
Questo manuale include il tagliando
di
garanzia. (pagina n.1-8)
website
e-mail
:
: http//www.LGEservice.com
http//www.LGEservice.com/techsup.html
CAUTION
The laser used in the CD-ROM drive
:
Do not attempt to open the
can
damage
your eyes.
cover.
To reduce the risk of electric shock, do not
remove cover
(or back).
No user-serviceable parts inside.
Refer
This unit
English
uses
servicing
or
qualified
service
personnel.
CD-ROM discs
marked with this
Use of controls
to
symbol
of
performance
:
procedures
other than those
specified
here in may result in hazardous radi-
ation exposure.
PRODUCT COMPLIES WITH DHHS
RULES 21 C.F.R. SUB-CHAPTER J,
IN EFFECT AT THE DATE OF MANUFACTURE.
WARNING
:
To reduce the risk of fire
do not expose this
Industry
Canada
This class B
or
electric shock,
to rain
appliance
or
moisture.
requirement
digital apparatus
meets all
requirements
of the Canadian
Interference-Causing Equipment
Regulations.
Cet
appareil numerique
de la classe B respecte toutes les
exigences
du
Reglement
sur
le materiel
brouilleur du Canada.
FCC COMPLIANCE STATEMENT
Note
:
This
equipment
has been tested and found to
comply with
the limits for
a
Class B
digital device, pursuant to
Part 15 of the FCC Rules.
These limits
tion. This
are designed to provide reasonable protection against harmful interference in a residential installaequipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may
cause
guarantee that interference will
occur
no
interference to radio
-
-
-
-
?
?
This
or
television
not
reception,
harmful interference to radio communications. However, there is
in
a
particular
which
can
installation. If this
be determined
equipment does cause harmful
by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
Consult the dealer or an Authorized Service Center for help.
the receiver is connected.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the
authority to operate the equipment.
This CD-ROM Drive is for use only with UL listed personal computers that have installation instructions
detailing user installation of card cage accessory.
product
is manufactured to
comply
with the radio interference
89/336/EEC, 93/68/EEC and 73/23/EEC.
E-2
requirements
user's
of EEC DIRECTIVE
DECLARATION OF CONFORMITY
This device
is
subject
not
cause
complies with
following
to the
harmful
interference, and (2)
any interference received,
undesired operation.
Trade Name/Model
Responsible Party
Address
Part 15 of the FCC Rules.
two conditions
including
or
:
Operation
this device may
this device must accept
:
(1)
interference that may
cause
Goldstar/CRD-8480M
LG Electronics U.S.A. Inc.
:
6133 N. River
:
Road, Suite
1100
(Riverway Plaza) Rosemont,
Mr. K.S.kim, Manager
Contact Person:
IL 60018
Tel. No. (847) 692-4500
Equipment Classification : FCC Class B Peripheral Device(JBP)
Type of Product (EUT) : CD-ROM Drive
Manufacturer
:
Address
:
Attention
:
19-1, Cheongho-Ri, Jinwuy-Myon
Pyungtaek-Shi, kyunggi-Do, 451-713
Mr. T.K.Lee General Manager
Korea
-
Multimedia Standards Team
We
hereby declare that the equipment bearing the
specified above was tested conforming to
number
trade and model
the
applicable FCC
possible, and
Rules under the most accurate measurement standards
that all the necessary steps have been taken and are in force to assure
that production units of the same equipment will continue to comply
with the Commission's
requirements.
E-3
Features
Features
[
E-IDE interface
[
48X-speed
[
75ms random
[
Intelligent
[
Small CPU bandwidth
[
Motorized
[
Horizontal/Vertical
[
[
[
[
[
[
Max 7200KB/sec data transfer rate
time
access
128KB data
buffering system
(MPC spec.)
tray loading system
mounting support
Designed for internal mounting
Emergency eject support
Easy audio CD control button support
Supports Windows 95 & 98 Plug-and-Play
Multimedia PC MPC compliant
Photo CD multisession
ATAPI
protocol
support
System Requirement*
[
IBM PC AT
[
[
[
[
[
or
compatible,
486 SX 25 processor
or higher
higher recommended).
640 Kb memory (16Mb or higher recommended).
A suitable free standard 51/4" internal drive bay.
MS-DOS version 3.1 or higher. (Windows 95 and above recommended).
31/2" 1.44 Mb Floppy Drive.
An existing IDE controller with an available cable connector or a new IDE
controller (recommended with IDE PIO Mode 4 capability) that you will need
(Pentium
133 Processor
or
to install.
*
Please note: certain software
playback) may require
acceptable results.
an
(i.e. particularly those including Video
considerably increased specification PC to give
E-4
Location and Function of Controls
Front View
COMPACT
COMPACT
1
2
3
4
5
6
Back View
DIGITAL
AUDIO
ANALOG
AUDIO
DGRGL
INTERFACE
CSM
39
SLA
40
12
Supplied
POWER
12
3
4
zDevice
Driver(MS-DOS)
+5
GND+12
5
Accessories
zOwner's Manual
E-5
zAudio Cable
Front View
1.
Jack
Headphone
Standard 1/8"
(3.5mm)
stereo
jack
for
listening
to the audio
signal
from audio
CDs.
2.
Headphone Volume Control
Adjusts the headphone sound
3.
Disc Drawer
Accepts
4.
5.
CD-ROM disc
a
on
its
level.
tray.
Busy Indicator
The Busy Indicator lights during
Emergency Eject
Insert a paper clip
initialization and data-read
operations.
Hole
here to
eject
the drawer
manually
or
when there is
no
power.
6.
Open/Close/Stop Button
pressed to open or close
If an audio CD is playing, pressing this
again will open the tray.
This button is
the CD
tray.
stop it, and pressing it
button will
Back View
1.
Digital
Audio
This is
a
You
2.
can
Analog
Output Connector
digital audio output or Video CD output connector.
connect this to a digital audio system or a Video CD
Audio
The Audio
3.
Output
Output Connector
Master/Slave/CSEL
These three
Slave,
4.
or
connects to
a
sound card.
Jumper
jumpers
are
used to set the CD-ROM Drive to either
a
Master,
CSEL device.
Interface Connector
This
40-pin
connector is used to transfer data and control
CD-ROM Drive and your PC.
5.
Board.
Connector
Power-in Connector
Attach
a
power cable from the computer to this connector.
E-6
signals
between the
the Drive
Installing
Before
installing
the drive, turn off the
system power. Follow the steps below
to
install the CD-ROM drive:
1.
Remove the
computer
from your
cover
for details about
CD-ROM drive to the drive
Connect the
4-pin
the
removing
Insert the CD-ROM drive unit into
2.
3.
computer system. Refer
bay
a
free 5.25-inch drive
rails with the
power cable and
to manual for the
cover.
40-pin
mounting
bay.
Secure the
screws
(supplied).
IDE interface cable to the back of
the CD-ROM drive.
POWER
INTERFACE
DIGITAL
AUDIO
ANALOG
AUDIO
+12
+5 GND
12
Power Cable
DGGLCSM39
40
R
SLA
Audio Cable
Red
IDE cable
Notes: If there is
to
purchase
The red
a
edge
no
splitter
Strip
spare power cable available in the computer, you will have
cable of
of the IDE cable
a
suitable
type.
corresponds
to
pin
1 of the IDE interface
on
the
CD-ROM drive.
Please Note:
an
IDE cable is not
and may be
supplied
required
to be
purchased
separately.
If the
with
computer is using
an
SoundBlasterⓒ
it
a
sound card, the drive is connected to the sound card
audio cable. This CD-ROM drive is
maybe
compatible
supplied
with
a
Creative Labs
audio lead, if this is not suitable for your sound card,
necessary for you to
purchase
a
suitable lead from your retailer. Refer
to the manual for the sound card for detailed information
E-7
regarding
connection.
4.
Adjust
the Master/Slave
jumpers
on
the back of the CD-ROM drive
as
necessary.
Connect the CD-ROM drive to the IDE
the hard drive will be in
operating system.
There
IDE
Primary
are
two
ports of your motherboard. In general,
port and Master device for booting the
possible
alternate connection for CD-ROM
drive installation.
A)
When
using
a
Primary
IDE
port
If you need to connect your CD-ROM drive to the
CD-ROM drive should be set to Slave
same
Primary
IDE
port, the
position.
Master drive
(Booting
DIGITAL
UDIO
DG
hard
disk)
ANAL
UDI
R
GL
CE
1
2
Primary
POWER
+5
GND
+12
connector
Slave drive
(CD-ROM drive)
B)
When
You
can
Master
using
a
Secondary
IDE
port
also connect CD-ROM drive to the
Secondary
IDE
port and
set to
position.
Master drive
(Booting
hard
Master drive
disk)
(CD-ROM drive)
DIGITAL
UDIO
AN
LOG
UDIO
DG
RGL
CSM
39
INTERFACE
0
1
2
POWER
+5 GND +12
Slave drive
DIGIT
AL
DIO
U
DG
(Other
ANLOG
UDIO
R
GL
E
1
2
POWER
+5+
GND
1
2
IDE
drive)
Motherboard
Primary
5.
Secondary
connector
When the installation of the drive unit is
complete, replace
the
cover.
6.
Reconnect the
computer power cord and
E-8
turn
on
the
computer.
connector
computer
Device Drivers
When
Windows 98/95
using
or
Window NT Workstation Ver. 4.0, the
installation of any software driver
or
special
device is not
supplied with MS-DOS drivers
required to use the CD-ROM drive
required.
This CD-ROM drive is
on a
These drivers
in DOS and Windows 3.1.
are
Drivers for other
95, 98, NT 3.51
disk.
Operating Systems are not normally required or available as
an generic IDE, E-IDE/ATAPI CD-ROM driver built in; Windows
and higher and OS/2 Warp 3.0 are such examples.
If it is necessary to edit any file
disk, then edit the original file,
the
ensure
Running
floppy
have
they usually
PC to
31/2-inch
change
manually,
save
will be
the Install
first make
a
backup
copy
on a
floppy
it to your hard drive, exit, and re-boot the
implemented.
Program (MS-DOS Installation)
4.
appropriate drive with DOS booting.
by typing A: or B: at the DOS prompt, as appropriate.
Type the word INSTALL and press [ENTER].
The INSTALL program will begin loading. When loading is complete, the
5.
Follow the instructions
6.
When installation is
1.
2.
3.
Insert the diskette into the
Go to the
floppy
drive
INSTALL program identification will appear
on screen.
on screen.
complete,
remove
the diskette and reboot your PC.
For Windows 98/95 Users
[
In order to
?
?
[
If
normal drive operation, please check the following:
displayed in
[control panels]-[system]-[device manager]-[CD-ROM]
32-bit is displayed in
[control panels]-[system]-[performance]
the drive is not recognized by your computer, please check the following
ensure
The drive is
items.
?
If a
indicator is displayed on the IDE controller in [control panels][system]-[device manager]-[harddisk controller], you will need to contact
your PC's manufacturer
appropriate
[
or
the motherboard's manufacturer and
get the
IDE controller driver.
Run ADD NEW HARDWARE in Control Panel to let PC search
device.
E-9
again
for
new
For Windows NT Workstation Ver. 4.0 Users
[
In order to
?
normal drive operation, please check the following:
displayed on the IDE controller in
[control panels] [SCSI adapter] [devices]
the drive is not recognized by your computer, please check the following
ensure
The drive is
-
[
If
-
items.
?
If a
indicator is displayed
[SCSI adapter]-[devices], you
or
on
the IDE controller in
[control panels]-
will need to contact your PC's manufacturer
the motherboard's manufacturer and
get the appropriate IDE controller
driver.
Emergency Eject
This drive has
a
function that allows the CD to be
becomes necessary in
an
emergency, such
outage. Follow this procedure in such
NOTE: Don't
1)
2)
use
this feature
as
ejected manually
failure of the drive
if this
or a
power
a case.
except in
an
emergency.
Turn the power to OFF.
Poke
a
fine-tipped object (such
as a
straightened heavy duty
paper
the small hole at the front. The front door will pop open and the disk
come
partway
clip)
into
tray will
out.
COMPACT
COMPACT
3)
Pull the front door to open it all the way, then
thumb and
forefinger
NOTE: This feature is
excessively
will
cause
a
and
last
gently pull
measure
it
grip the
straight out.
to be used
malfunction.
E-10
only
in
disc
an
tray between
emergency.
Using
it
Installation, Usage and Handling Precautions
[
lnstallation
Avoid
-
-
-
a
location
subject
to
:
mechanical vibration
-
Avoid
exposing
cause
excessive vibration
or a
sudden
jolt
to the drive may
malfunction.
cause a
-
in
direct
sunlight
Operation
During operation,
-
[
placing the drive
high humidity
high temperature
the drive to sudden
changes
in
temperature. This may
condensation to collect inside the drive.
Do not use damaged, cracked, or warped discs.
Transportation
Always remove the disc before moving the drive.
-
[
-
Troubleshooting
*
When the CD-ROM drive does not work with the hard disk drive in
primary
IDE channel.
(SOLUTION)
1.
Check the CD-ROM drive Master/Slave
Jumper setting.
The CD-ROM drive must be set to the Slave mode.
2.
3.
Check to be
sure your hard disk Interface type is IDE type.
Check your hard disk Master/Slave Jumper setting.
Some old-version IDE type hard disks were set to Master Only mode.
In that case, contact your hard disk company and
jumper setting to master mode.
4.
change
your hard disk
If the CD-ROM drive does not work with above methods, you may need a
IDE card. If you use the secondary IDE card, you should set the
secondary
CD-ROM drive
device you
*
jumper to the
connecting to
are
master mode if the CD-ROM drive is the first
the
secondary
IDE card.
When the CD-ROM drive does not install in OS/2 warp.
(SOLUTION)
1.
Select NON-LISTED IDE CD.
*
CD-ROM drive is not
present in Windows
3.1
or
3.11
or
DOSSHELL.
(SOLUTION)
1.
When the WIN
or
DOSSHELL command lines
are present in your
that the MSCDEX.EXE command line appears
the DOSSHELL command lines.
AUTOEXEC.BAT, make
before the WIN
NOTE:
For
more
or
sure
information, consult the README.TXT file of the supplied Setup
Diskette.
E-11
Specifications
General
Data
Capacity
553
Mbytes (mode 1),
Disc Diameter
12 cm/8
Rotational
Approx. 10,500
Speed
635
Mbytes (mode 2)
cm
rpm
Performance
Interface
E-IDE
Supported System
IBM PC-AT
Transfer rate
Sustained Data Transfer Rate=Max
Access Time
Random 75
MTBF
125,000 Power On Hours (Duty Cycle 10%)
Buffer size
128
or
Compatible
ms
7200Kbytes/sec
Typical
Kbytes
Error Rate
ECC
1 block/1015 bits
(48x)
(48x)
2,048 bytes/block (Mode1 & Mode2 Form1)
2,340, 2,336 bytes/block (Mode2)
2,324 bytes/block (Mode2 Form2)
2,352 bytes/block (CD-DA)
on
ECC off
1 block/1012 bits
User Data/Block
Supported
Audio
Disc
CD-DA, CD-ROM, CD-ROM XA-READY, Photo-CD
CD-Plus/CD-Extra, Mixed CD, CD-RW
Specifications
Frequency Response
20Hz-20KHz+1/-3dB
S/NRatio
85 dB
THD
0.05%at1KHz
Channel
Separation
Headphone Level
Line Output Level
Line Output Jack
Headphone Jack
80dBat1KHz
0.70 Vrms
(33Ω)
0.70 Vrms ± 20%
(47kΩ)
(Rear)
(Front)
4-Pin terminal
ø
3.5
mm
Environment
5-45°C
Temperature
Power
Requirements
12V±10%
Ripple
<
100m
Vpp
100m
Vpp
5V±5%
Ripple
NOTE:
<
Specifications
are
1.5A
(Maximum)
0.9A
(Maximum)
subject
to
change
without notice for
E-12
improvement.
Internet Address
http://
:
www.LGEservice.com
CD-ROM LIMITED WARRANTY
LG Electronics U.S.A., Inc. will
repair or at its option replace, without charge, your product which proves
workmanship under normal use, during the warranty period listed below from
the data of original purchase. This warranty is good only to the original purchaser of the product
during the warranty period as long as it is in the U.S. including Alaska, Hawaii, and U.S.Territories.
to be defective in material
or
WARRANTY PERIOD
MODEL#
LABOR
PARTS
CRD-8481B
1 Year
1 Year
HOW SERVICE IS HANDLED
If the unit is defective, a replacement* will be
by 2-day air for the first year.
sent
After
one year, repair or a 2-day swap at a
fixed labor charge. For service, please call
1-800-243-0000
(Mon.~Fri.7AM~7PMCST)
No other express warranty is applicable to this product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY HEREIN. LG ELECTRONICS U.S.A., INC.
SHALL NOT BE LIABLE FOR THE LOSS OF THE USE OF THE PRODUCT, INCONVENIENCE,
LOSS OR ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE
OF, OR INABILITY TO USE, THIS PRODUCT OR FOR ANY BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
APPLICABLE TO THIS PRODUCT.
Some states do not allow the exclusion
limitations
or limitation of incidental or consequential damages or
long an implied warranty lasts; so these limitations or exclusions may not apply to
warranty gives you specific legal rights and you may also have other rights which vary
on
how
you. This
from state to state.
THE ABOVE WARRANTY DOES NOT APPLY:
1. To
2.
3.
damages or problems which result from delivery or improper installation.
To damages or problems which result from misuse, abuse, accident, alteration, or incorrect
electrical current or voltage.
To service calls which do not involve defective workmanship or material and explaining the
operation of the unit.
Therefore these costs
are
paid by the
consumer.
CUSTOMER ASSISTANCE NUMBERS:
To Prove
Warranty Coverage:
¤x Retain your Sales Receipt to prove date of purchase.
¤x Copy of your Sales Receipt must be submitted at the time
warranty service is provided.
To Obtain Product, Customer,
or Service Assistance:
¤x Call 1-800-243-0000 24 hrs/7
For
*
Exchange
Service:
days
appropriate menu code,
http:/www.LGEservice.com/techsup.html
Push
or
Replacement is a factory-reconditioned unit.
period. Factory-reconditioned units
year warranty expires.
one-year
for support
by
E-mail.
¤x Call 1-800-243-0000 (Mon~Fir8am~5pmCST)
Push appropriate menu code.
Free
are
replacement applies only
available at
a
low, fixed
within the initial
cost after the
one-
ENHACE
D
CD-ROM DRIVE
English.........Page
CH01
E-2
~
Deutsch .........Seite D-1
Francais .........Page
~
I-1
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
D-7
~
F-1
Italiano............Pagina
E-12
F-7
~
I-9
Copyrightⓒ
Spanish.......Pagina
S-1
S-7
~
2000
LG Electronics U.S.A. Inc.
1000
Sylvan
Ave.
Englewood
Cliffs
NJ 07632 U.S.A.
LG Electronics Canada lnc.
235
Superior Blvd, Mississauga
Ontario, Canada
LG Electronics Deutschland GMBH
Jakob-Kaiser-Straße 12,
D-47677 Willich,
Germany
LG Electronics U. K. Ltd.
LG House, 264 Bath Road,
Slough Berkshire SL1 4DT
United
Kingdom
Goldstar France SARL
12, Rue Lech Walesa-Z.I. Pariest
77185
Lognes,
France
LG Electronics Italia S.P.A.
Centro Direzione "IL Quadrate" Via Modigliani,
20090 Segrate (MI) Italy
LG Electronics
Espana
Adva, De Europa,
28108 Alcovendas
ⓒ 2000
P/NO
:
21
(Madrid) Spain
by
3828HM1017A(SC1)
Printed in Korea
(M-K)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising