ENGLISH
OWNER’S MANUAL
Mini Hi-Fi System
Please read this manual carefully before operating your set and retain it
for future reference.
CM8530 (CM8530, CMS8530F/S/W)
CM8430 (CM8430, CMS8530F/W)
CM8330 (CM8330, CMS8530F)
CM8530-FU_DKENHL_ENG.indd 1
2013-03-07 �� 12:11:46
1
2
Getting Started
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
CM8530-FU_DKENHL_ENG.indd 2
2013-03-07 �� 12:11:47
Getting Started
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
CM8530-FU_DKENHL_ENG.indd 3
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
1
Getting Started
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
3
2013-03-07 �� 12:11:47
4
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
7
Playable file Requirement
7
– MP3/WMA music file requirement
7
– Compatible USB Devices
7
– USB device requirement
8
Front panel
10 Rear panel (CM8530)
11 Rear panel (CM8430)
12 Rear panel (CM8330)
13 Remote control
2Connecting
14
14
14
15
15
16
17
18
18
18
18
19
19
How to Affix the Ferrite Core(For EMI
only)
– Affix the Ferrite Core for power cord
(For EMI only, CM8530, CM8430)
– Affix the Ferrite Core for lighting
cable (For EMI only, CM8530,
CM8430)
Connecting to speakers
– Before connecting (CM8530 only)
– Connecting to speakers
– Attaching the speaker light cables to
the unit (For CM8530, CM8430)
Optional Equipment Connection
– AUX IN Connection
– PORT. IN Connection
– Listening to music from your portable
player or external device
– USB Connection
– Antenna Connection
CM8530-FU_DKENHL_ENG.indd 4
3Operating
20 Basic Operations
20 – CD/USB Operations
20 – Selecting a folder and
an MP3/WMA file
21 – Deleting an MP3/WMA file
22 Playback effect
22 – SMART DJ playback
23 – DJ effect
23 – AUTO DJ playback
24 – JUKE BOX Playback
(Program play)
25 Radio Operations
25 – Listening to the radio
25 – Improving poor FM reception
25 – Presetting the Radio Stations
25 – Deleting all the saved stations
26 Other Operations
26 – Turn off the sound temporarily
26 – Displaying file information
(ID3 TAG)
26 – DEMO
26 – Using Microphone
26 – Switching on and off the speaker
light(For CM8530, CM8430)
27 Sound adjustment
27 – Setting the surround mode
27 – Setting the USER EQ
28 Setting the Clock
28 – Setting the Clock Manually
28 – Using your player as an alarm clock
29 – Sleep Timer Setting
29 – Dimmer
29 – Auto power down
29 Advanced Operations
29 – Recording to USB
2013-03-07 �� 12:11:47
Table of Contents
5
4Troubleshooting
32Troubleshooting
5Appendix
33 General specifications
34 Speakers specifications
35Maintenance
35 – Notes on Discs
35 – Handling the Unit
35 Trademarks and Licenses
1
2
3
4
5
CM8530-FU_DKENHL_ENG.indd 5
2013-03-07 �� 12:11:47
6
Getting Started
Unique Features
1
Portable In
Accessories
Please check and identify the supplied accessories.
Getting Started
Listens to music from your portable device. (MP3,
Notebook, etc)
Playback effects
Listens to music with various sound and playback
effects.
Remote Control (1)
Batteries (2)
Non-skid pad (1)CM8530 only
FM Antenna (1)
USB Direct Recording
Records music to your USB device.
CM8530-FU_DKENHL_ENG.indd 6
2013-03-07 �� 12:11:48
Getting Started
Playable file
Requirement
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
yy The USB function of this unit does not support
all USB devices.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy Maximum files : Under 999
yy For a large capacity USB, it may take longer than
a few minute to be searched.
yy Maximum folders : Under 99
yy To prevent data loss, back up all data.
yy File extensions : “.mp3”/ “.wma”
yy CD-ROM file format : ISO 9660/ JOLIET
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system
for Windows Vista)
yy This unit is not supported when the total
number of files is 1 000 or more.
CM8530-FU_DKENHL_ENG.indd 7
1
Getting Started
MP3/WMA music file
requirement
7
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
2013-03-07 �� 12:11:48
Getting Started
8
Front panel
1
Getting Started
a
b
h
c
d
i
e
j
f
k
g
l
m
CM8530-FU_DKENHL_ENG.indd 8
2013-03-07 �� 12:11:49
Getting Started
aDisplay window
Remote sensor
h ENTER
Selects a folder when searching a file.
cUSB 1/2 Port
You can play or record sound files by
connecting the USB device.
FOLDER
Moves to folder and file selection mode.
DELETE
Deletes MP3/WMA files. (USB only)
Deletes a song on JUKE BOX list.
USB REC
Records to USB.
dFUNCTION
Selects the function and input source.
Turn FUNCTION knob clockwise or
counterclockwise.
eLG EQ
Chooses locally special equalizer.
SMART DJ
Selects SMART DJ mode. (For more information
refer to the page 22)
AUTO DJ
Selects the AUTO DJ mode. (For more
informaion refer to the page 23)
USER EQ
Sets sound equalizer on your own.
EFFECT LEVEL
Selects DJ effect level between low, middle, and
high.
fDJ EFFECT
Press DJ EFFECT
-select DJ effect mode.
-Enters USER EQ setting mode and saves your
equalizer setting
Turn DJ EFFECT
- makes a sound on DJ effect mode.
- Selects BASS, MIDDLE, and TREBLE when
setting USER EQ.
gVolume knob
Adjusts speaker volume.
CM8530-FU_DKENHL_ENG.indd 9
iFILE SEARCH
Selects a folder and a file on CD/USB function.
jBASS BLAST
Selects the BASS BLAST or BYPASS sound
directly.
B (Open/Close)
I
- Stops playback or recording.
- Cancels DELETE function.
SPK Lighting / DEMO (CM8530 / CM8430)
- Changes speaker’s lighting effect.
- Shows demo
DEMO (CM8330)
- Shows demo
JUKE BOX
- Makes your favourites list.
- Switches on and off JUKE BOX.
kY/
1
Getting Started
b1/!(Power)
9
/U
Press this knob to
- Starts or pauses playback.
- Selects Stereo/Mono.
(Play/Pause).
Turn this knob clockwise or counterclockwise to
Y/U (Skip/Search).
- Skips Fast backward or Forward.
- Searches for a section within a track/file.
- Adjusts the sound level when setting USER EQ.
lDisc tray
mPORT. IN jack
MIC jack
MIC VOL.
2013-03-07 �� 12:11:49
10
Getting Started
Rear panel (CM8530)
1
Getting Started
a
c
d
b
e
f
a Cooling fan
b Speakers connector
c SPEAKER LIGHTING SYSTEM
d AUX IN connectors (L/R)
e ANTENNA (FM)
f Power cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
CM8530-FU_DKENHL_ENG.indd 10
2013-03-07 �� 12:11:50
Getting Started
11
Rear panel (CM8430)
1
c
Getting Started
a
d
b
e
f
a Cooling fan
b Speakers connector
c SPEAKER LIGHTING SYSTEM
d AUX IN connectors (L/R)
e ANTENNA (FM)
f Power cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
CM8530-FU_DKENHL_ENG.indd 11
2013-03-07 �� 12:11:50
12
Getting Started
Rear panel (CM8330)
1
Getting Started
a
c
b
d
e
a Cooling fan
b Speakers connector
c AUX IN connectors (L/R)
d ANTENNA (FM)
e Power cord
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
yy Do not overload the extension cord with
excessive electrical load.
CM8530-FU_DKENHL_ENG.indd 12
2013-03-07 �� 12:11:51
Getting Started
• • • • • • a • • • • • • d/M (Play/Pause) :
1 (Power) : Switches the unit ON
or OFF.
-- Starts or pauses playback.
B (Open/Close) : Opens and
closes the disc tray.
SOUND EFFECT : Chooses sound
impressions.
1
AUTO DJ : Selects the AUTO DJ
mode. (For more information refer
to the page 23)
Getting Started
Remote
control
PRESET.FOLDER W/S :
-- Searches for a folder of MP3/
WMA files. When a CD/USB
containing MP3/WMA files in
several folders is being played,
press PRESET.FOLDER W/S
to select the folder you want
to play.
-- Chooses a preset number for a
radio station.
FUNCTION : Selects the function
and input source.
MUTE @ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
TUNER MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
USB REC : USB direct recording.
?
SLEEP : Sets the system to turn
off automatically at a specified
time.
(Dimmer : The display window
will be darkened by half.)
• • • • • • b • • • • • • REPEAT (MENU): Listens to
your tracks/files repeatedly or
randomly.
Battery Installation
TUNING-/+ : Selects the radio
stations.
C/V (Skip/Search) :
-- Skips Fast backward or
Forward.
Remove the battery cover on
the rear of the Remote Control,
and insert two (size R03(AAA))
batteries with 4 and 5 matched
correctly.
CM8530-FU_DKENHL_ENG.indd 13
13
-- Searches for a section within a
track/file.
-- Selects STEREO/MONO.
DELETE :
-- Deletes MP3/WMA files.
-- Deletes a song on JUKE BOX
list.
• • • • • • c • • • • • • 0 to 9 numerical buttons : Selects
numbered tracks, files, or preset
number.
INFO : Sees informations about
your music. An MP3 file often
come with ID3 tag. The tag gives
the Title, Artist, Album or Time
information.
? : The button is not available for
any function.
• • • • • • d • • • • • • CLOCK : For setting the clock and
checking the time.
TIMER : With the TIMER function
you can turn CD, USB play and
TUNER reception on or off at a
desired time.
SET : Confirms the setting.
SMART DJ : Selects SMART DJ
mode. (For more information refer
to the page 22)
JUKE BOX :
-- Selects JUKE BOX mode.
-- Makes your favorites list.
EFFECT LEVEL +/- : Adjusts
SMART DJ effect sound level.
Z ENTER :
-- Stops playback or recording.
-- Cancels DELETE function.
2013-03-07 �� 12:11:51
14
Connecting
How to Affix the
Ferrite Core(For EMI
only)
2
Connecting
Affix the Ferrite Core for
power cord (For EMI only,
CM8530, CM8430)
Affix the Ferrite Core for
lighting cable (For EMI only,
CM8530, CM8430)
Before connecting speaker’s lighting cable, you
should affix ferrite core in order to reduce or
eliminate electrical interference.
You must affix a ferrite core in order to reduce or
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core
once.
3. Close the ferrite core until it clicks.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the speaker lighing cables around the
ferrite core twice.
3. Close the ferrite core until it clicks.
CM8530-FU_DKENHL_ENG.indd 14
2013-03-07 �� 12:11:53
Connecting
Connecting to speakers
15
Positioning the main unit and the
speakers
Surround speaker
Front speaker
Before connecting (CM8530
only)
You have to position the unit and the speakers
before connecting the speakers. Note that the
illustrations below are differ from the actual unit.
2
Positioning the speakers
Speaker duct
20 cm
20 cm Speaker duct
Connecting
The following illustrations show an example of the
positioning which is the left side of the main unit.
yy The speaker ducts of subwoofer have to be faced
opposite the main unit. Otherwise it may result
in a malfunction of the main unit.
yy The subwoofer have to be placed at a distance
of about 20 cm from the main unit.
: Non-skid pad
1. Attach the non-skid pads to the right side of
subwoofer.
2. Lay the subwoofer down as the illustration
above.
Surround
speaker
Front
speaker
Stacking
board
Subwoofer
: Non-skid pad
3. Put the stacking board on the subwoofer.
4. Place the front and the surround speakers on
the stacking board firmly.
5. Attach the non-skid pads between the front and
the surround speakers for preventing scratchs.
CM8530-FU_DKENHL_ENG.indd 15
2013-03-07 �� 12:11:55
16
Connecting
Connecting to speakers
Connect the speaker cable plugs to the SPEAKERS
connector. Make sure to connect the speaker’s plug
to the corresponding speaker connector when
connecting the plug.
>>Caution
yy Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
yy Check the volume level before playing
music to prevent infirm, child, and pregnant
women from being shocked by the sudden
and loud sound from the unit.
2
Connecting
yy Do not use the unit in a limited space.
It may damage a person’s hearing. It is
recommended to use it in a wide space.
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
CM8530
Color
Speaker
Grey
SURR R
Red
FRONT R
Orange
SUB WOOFER 1
Orange
SUB WOOFER 2
Blue
SURR L
White
FRONT L
yy The speakers contain magnet parts, so color
irregularity may occur on the TV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
yy Make sure to install the speaker with other
people in order to prevent it from falling
and causing injuries to the installer.
CM8430
Color
Speaker
Red
FRONT R
Orange
SUB WOOFER
White
FRONT L
CM8330
Color
Speaker
Red
FRONT R
White
FRONT L
CM8530-FU_DKENHL_ENG.indd 16
2013-03-07 �� 12:11:56
Connecting
17
Attaching the speaker
light cables to the unit (For
CM8530, CM8430)
Connect the speaker’s lighting cables on the
speakers to the SPEAKER LIGHTING SYSTEM jack on
the unit.
2
Connecting
>>Caution
yy Make sure to connect the cables to
connectors tightly on the unit.
yy Make sure that the jacks and the speakers
are matched correctly.
CM8530-FU_DKENHL_ENG.indd 17
2013-03-07 �� 12:11:57
18
Connecting
Optional Equipment
Connection
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
AUX IN Connection
Connect an output of auxiliary device(Camcoder,
TV, Player, etc) to the AUX IN (L/R) connector.
2
Connecting
If your device has only one output for audio(mono),
connect it to the left (white) audio jack on the unit.
Portable cable
MP3 player etc.
Listening to music from your
portable player or external
device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1/!.
3. Select the PORTABLE or AUX function by using
FUNCTION.
4. Turn on the portable player or external device
and start it playing.
CM8530-FU_DKENHL_ENG.indd 18
2013-03-07 �� 12:11:58
Connecting
19
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM antenna for listening to
the radio.
USB device
Connect the FM wire antenna to the FM antenna
connector.
Be sure to fully extend the FM wire antenna.
FM antenna
2
Connecting
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z ENTER on the remote control
or I on the unit twice in a row.
2. Remove the USB device from the unit.
CM8530-FU_DKENHL_ENG.indd 19
2013-03-07 �� 12:11:58
3Operating
20 Operating
,,Note
Basic Operations
yy The display changes in the following order.
USB
MP3/WMA CD
Audio CD
1. Insert the disc or connect the USB device to the
USB port.
REPEAT TRK
REPEAT TRK
REPEAT TRK
REPEAT *DIR
REPEAT DIR
-
2. Select a source by using FUNCTION. The
selected source appears on the display window.
REPEAT ALL
REPEAT ALL
REPEAT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
CD/USB Operations
To
3
Stop
Playback
Operating
Pause
Searching
for a
section
within a
track/file
Selecting
a track/file
directly
Do this
On the remote
On the unit
control
Press Z ENTER. Press I.
Press d/M.
Press
.
Press d/M during Press
during
playback.
playback.
Turn Y/U
Press and hold
knob clockwise or
C/V until counterclockwise
the time you
and hold it until
want to listen to is the time you
displayed.
want to listen to is
displayed.
Press 0 to 9
numerical buttons
on the remote
control to go to
the desired file or
track directly.
Skipping
to the
Press C/V
next/
during playback.
previous
track/file
Press
Playing REPEAT(MENU)
repeatedly repeatedly. Refer
to the note for
or
randomly details about the
display change.
CM8530-FU_DKENHL_ENG.indd 20
Turn Y/U
knob clockwise or
counterclockwise
during playback.
*DIR : Directory
yy When you play JUKE BOX list, only REPEAT
TRK and REPEAT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy The next file name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last file of playlist, etc.)
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Selecting a folder and
an MP3/WMA file
On the unit
1.Press FOLDER and rotate FILE SEARCH until a
desired folder appears.
2.Press ENTER and rotate FILE SEARCH until a
desired file appears. Press
to play it.
On the remote control
-
1.Press PRESET.FOLDER W/S repeatedly until a
desired folder appears.
2.Press d/M to play it. The first file of folder will
play.
2013-03-07 �� 12:11:59
Operating
,,Note
Deleting an MP3/WMA file
yy Folders/Files on the CD or USB are
recognized as below.
*ROOT
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
: Folder
: File
Folder 1
Folder3
21
1.-Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by
pressing FOLDER and rotating FILE SEARCH
and press DELETE.
File5
File6
-Press and hold DELETE to format the USB
device.
File7
Or
Folder4
Folder8
File8
File9
Press DELETE repeatedly during selecting the
MP3/WMA file.
File10
The display changes in the following order.
- DEL FILE? : Deletes file
- DEL FOLDER : Deletes folder
- FORMAT? : Formats USB
Folder2
Folder5
Folder6
File11
File12
File13
File14
File1
File2
yy If there is no file in a folder, the folder will
not appear.
yy Folders will be presented as the following
order :
ROOT FOLDER 1 FOLDER 3 FOLDER
7 FOLDER 8 FOLDER 5 FOLDER 6
3
Operating
File3
File4
Folder7
2. To delete file/folder or format, press d/M on the
remote control or press
on the unit.
3. If you want to exit the current mode, press
Z ENTER on the remote control or press I on
the unit.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
yy Regular back up is recommended to
prevent data loss.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : It is “ROOT” which is the first screen
you can see when a computer recognizes
the storage device.
CM8530-FU_DKENHL_ENG.indd 21
2013-03-07 �� 12:11:59
22 Operating
Playback effect
The unit supports various sound and playback
effects : SMART DJ, AUTO DJ, DJ EFFECT, and JUKE
BOX playback.
,,Note
yy Find sound and playback effects below.
Effect
Description
Auto effect
Auto effect blends
various sound effects
to fit the mood
automatically. It includes
flanger, phaser, delay,
and chorus.
Cross fade
It playbacks to
seamlessly fade from
one song into the
beginning of another.
Back spin
It playbacks a section of
music fast in reverse.
Loop
It repeats a section of
music.
Beat box
It inserts a beat box
during playback.
Voice
sampling
It inserts a sound during
playback.
SMART DJ playback
SMART DJ plays music with various sound and
playback effects : auto effect, cross fade, back spin,
loop, beat box, and voice sampling.
It plays repeatedly all the music and gives various
effects randomly.
3
Operating
You can enjoy it with 3 types of genre : ELECTRO,
HOUSE, and REGUETON. Press SMART DJ
repeatedly. The display window changes each time
you press SMART DJ as follows : SMART DJ OFF ->
SMART DJ ELECTRO -> SMART DJ HOUSE -> SMART
DJ REGUETON.
To cancel it, press SMART DJ repeatedly until
“SMART DJ OFF” appears on the display window.
You can listen to music as usual.
Adjusting the effect level
You can adjust SMART DJ effect sound level
between LOW, MIDDLE, and HIGH. As the effect
level moves from LOW to HIGH, SMART DJ effect
appears more frequently and makes the sound feel
more powerful.
On SMART DJ mode, press EFFECT LEVEL
repeatedly on the unit or EFFECT LEVEL +/- on the
remote control. The display window changes as
follows : MIDDLE -> HIGH -> LOW.
yy SMART DJ is supported only on CD and USB
function.
yy You can identify the effect by hearing the
sound, not by display window.
yy It is recommended to play only the certain
genres (ELECTRO, HOUSE, EGUETON) on
SMART DJ mode. SMART DJ is optimized to
enjoy that music
yy If the function changes to the others or turn
off and on the unit on SMART DJ mode,
SMART DJ will be turned off.
yy If you record your music you are listening
to on SMART DJ mode, SMART DJ will be
turned off and the music will be recorded
without any sound effect.
yy If SMART DJ is turned off, you should turn it
on again to enjoy the effect.
yy It is impossible to operate SMART DJ and
AUTO DJ at the same time. If you select one,
another will be turned off automatically.
CM8530-FU_DKENHL_ENG.indd 22
2013-03-07 �� 12:11:59
Operating 23
DJ effect
AUTO DJ playback
It allows you to enjoy DJ effect such as scratch
sound and several kinds of voices yourself.
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
1.Press DJ EFFECT on the unit. The display
window changes each time you press DJ
EFFECT as follows : OFF -> SCRATCH -> VOICE 1
-> VOICE 2 -> VOICE 3.
Description
SCRATCH
You can hear two kinds of
scratch sound depending on
the direction in which you turn
DJ EFFECT.
VOICE
1/2/3
You can hear only one kind of
the sound regardless of the
direction in which you turn DJ
EFFECT.
2.Turn DJ EFFECT clockwise or counterclockwise
during playback.
To cancel it, press DJ EFFECT until “DJ EFFECT OFF”
appears on the display window.
Mode
OFF
Display
Window
(AUTO DJ OFF)
Description
-
RANDOM
RANDOM
(AUTO DJ
RANDOM)
The music is
played randomly
on this mode.
REPEAT
REPEAT ALL
(AUTO DJ
SEQUENTIAL)
The music is
played repeatedly
on this mode.
3
Operating
Display
Window
Press AUTO DJ on the remote control or unit
repeatedly, the display changes as followings.
RANDOM (AUTO DJ RANDOM) -> REPEAT ALL
(AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF)
,,Note
yy It is not supported on the AUTO DJ mode to
search for a section within a track/file or to
play repeatedly or randomly.
yy During AUTO DJ mode, it is not available to
press PRESET.FOLDER W/S on the remote
control or FOLDER on the unit.
yy If you move to other functions or stop the
music using I on the unit (or Z ENTER on
the remote control) on AUTO DJ mode,
AUTO DJ function will be disable.
yy AUTO DJ function is not supported in the
music file whose length is less than 60
seconds.
yy During recording, AUTO DJ function is not
available.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
CM8530-FU_DKENHL_ENG.indd 23
2013-03-07 �� 12:12:00
24 Operating
JUKE BOX Playback
(Program play)
JUKE BOX function enables you to store your
favourite tracks/files from any disc or USB device.
Up to 100 tracks/files can be stored for each device.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKE BOX to enter the edit
mode.
3
2. Select a track/file by pressing C/V on the
remote control or by turning FILE SEARCH on
the unit.
3.Press JUKE BOX to save the track/file.
Operating
4. Repeat steps 2 to 3 to store the other tracks/
files.
5.Press JUKE BOX once again.
To play the JUKE BOX list, press d/M after you
make the list.
Enjoying JUKE BOX
Press JUKE BOX twice on stop status. “JUKE BOX
ON” appears on the display window. To play JUKE
BOX list, press d/M on the remote control or
on the unit.
To cancel it, press JUKE BOX twice. “JUKE BOX OFF”
appears on the display window.
CM8530-FU_DKENHL_ENG.indd 24
Deleting JUKE BOX list
Deleting function is worked only on the edit mode.
Refer to “Making JUKE BOX list” step 1.
To delete each song on JUKE BOX list,
1. Select a song by pressing JUKE BOX repeatedly.
2.Press DELETE while a song is selected.
To delete all the songs on JUKE BOX list, press Z
ENTER on the remote control or I on the unit.
,,Note
yy To check the status of JUKE BOX, press JUKE
BOX once. You can also check it by the word
“PROG.” on the display window.
yy If there is no JUKE BOX list, “JUKE BOX NONE”
appears on the display window when you
press JUKE BOX.
yy JUKE BOX is switched off in the case below.
-- Changing the function to the others.
-- Turning off and on the unit.
-- Operating the numeric buttons on the
remote control.
-- Playing a file by using PRESET.FOLDER
W/S on the remote control or FOLDER
and FILESEARCH on the unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the
USB device.
2013-03-07 �� 12:12:00
Operating 25
Radio Operations
Listening to the radio
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Select tuner(FM) function by using FUNCTION.
1. Select tuner(FM) function by using FUNCTION.
The last received station is tuned in.
2. Select a radio station you want to preset by
using TUNING-/+ on the remot control.
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control or turn Y/U knob on the unit
clockwise or counterclockwise and hold it
for about two seconds until the frequency
indication starts to change, then release.
Scanning stops when the unit tunes in a station.
3.Press TUNER MEMORY. A preset number will
blink in the display window.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press
on the unit or d/M on the remote
control. This will change the tuner from stereo to
mono and usually improve the reception.
CM8530-FU_DKENHL_ENG.indd 25
5.Press TUNER MEMORY. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET.FOLDER W/S or 0 to 9 numerical
buttons.
Deleting all the saved stations
3
Operating
Manual tuning :
Press TUNING-/+ on the remote control or
turn Y/U knob on the unit clockwise or
counterclockwise repeatedly.
4.Press PRESET.FOLDER W/S to select the
preset number you want.
1. Press and hold TUNER MEMORY for two
seconds.
“ERASE ALL” will flash up on the unit display.
2.Press TUNER MEMORY to erase all the saved
radio stations.
2013-03-07 �� 12:12:00
26 Operating
Other Operations
Turn off the sound temporarily
Press MUTE@ on the remote control to mute
your unit.
You can mute your unit, for example, to answer
the telephone, the mute icon “Q” is blinked in the
display window.
Displaying file information
(ID3 TAG)
3
Operating
While playing an MP3 file containing file
information, you can display the information by
pressing INFO.
DEMO
In the power off state, it demonstrates the function
on display window with a demo sound and a
display by pressing DEMO.
To cancel the DEMO, press it again.
,,Note
yy While DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during
the DEMO. Then the DEMO will pause to
temporary.
- Without input key in 10 sec, the DEMO will
play back automatically.
Using Microphone
It is available on the function as follows : CD, USB,
AUX-MIC.
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust
the microphone volume by rotating MIC VOL.
clockwise or unclockwise on the unit.
,,Note
yy When not using the microphone, set the
MIC VOL. to minimum or turn off the MIC
and remove the microphone from the
MIC jack.
yy If the microphone is set too near the
speaker, a howling sound may be produced.
In this case, move the microphone away
from the speaker or decrease the sound
level by using the MIC VOL..
yy If sound through the microphone is
extremely loud, it may be distorted. In this
case, rotate MIC VOL. to minimum.
yy AUX-MIC function enables only your voice
to output.
Switching on and off the
speaker light(For CM8530,
CM8430)
You can select various types of the speaker light by
pressing SPK Lighting / DEMO (CM8530 / CM8430)
on the unit.
To turn off the light, press SPK Lighting/DEMO
(CM8530 / CM8430) repeatedly until the light will
be turned off.
CM8530-FU_DKENHL_ENG.indd 26
2013-03-07 �� 12:12:00
Operating 27
Sound adjustment
Setting the surround mode
This system has a number of pre-set surround
sound fields. You can select a sound mode you
want by using SOUND EFFECT on the remote
control.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
,,Note
yy On some speakers, sound may not be heard
or heard in low sound depending on the
sound mode.
yy Maybe you need to reset the surround
mode, after switching the input, sometimes
even after the sound track/file changed.
yy By pressing BASS BLAST on the unit you
can directly select the BYPASS or
BASS BLAST sound.
Setting the USER EQ
Description
NATURAL
You can enjoy comfortable and
natural sound.
You can listen to music with equalizer by adjusting
the sound level yourself.
Local
Specialization
equalizer
Regionally optimized sound
effect. (FORRO/FUNK/
SERTANEJO/DANGDUT/ARABIC/
PERSIAN/INDIA/REGUETON/
MERENGUE/SALSA/SAMBA/
CUMBIA/AFRO HIP HOP)
2.Press DJ EFFECT on the unit while “USER EQ” is
displayed.
AUTO EQ
Realizes the sound equalizer that
is the most similar to the genre
of which is included in the MP3
ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock pop,
jazz or classic concert.
MP3 - OPT
This function is optimized
for compressible MP3 file. It
improves the treble sound.
BASS BLAST
Reinforces the treble, bass and
surround sound effect.
LOUDNESS
Improves the bass and treble
sound.
BYPASS
1.Press USER EQ on the unit. “USER EQ” is
displayed.
3
Operating
On Display
3. Select BASS, MIDDLE, or TREBLE by using DJ
EFFECT on the unit.
4. Adjust the sound level by turning Y/U
knob.
3. To finish the setting, press DJ EFFECT.
You can enjoy the sound
without equalizer effect.
CM8530-FU_DKENHL_ENG.indd 27
2013-03-07 �� 12:12:00
28 Operating
Setting the Clock
Setting the Clock Manually
1. Turn the unit on.
2.Press CLOCK on the remote control.
3. Select time format by using C/V.
- 12-hour format (AM and PM display) or
24-hour format (24 hour display)
4.Press SET to confirm your selection.
5. Select the hours by using C/V.
3
6.Press SET.
7. Select the minutes by using C/V.
Operating
8.Press SET.
Using your player as an alarm
clock
1. Turn the unit on.
2.Press TIMER on the remote control. Each of
functions flashes.
3.Press SET when the function you want to be
woken by is showing.
- Select a radio station if you have preset them.
4. “ON TIME” will be displayed. Select the hours
and the minutes by using C/V and press
SET to save.
5. The “OFF TIME” will be displayed. Select the
hours and the minutes by using C/V and
press SET to save.
6. Adjust the volume level by using C/V
and press SET to save. The clock icon “(“
shows that the alarm is set.
7.Press TIMER button 2 times. You can check the
setting status.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK even when the player is turned off.
yy If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
informaiton by pressing TIMER even when
the unit is turned off.
yy To reset the time, press and hold CLOCK
or TIMER. And then follow the setting step
from 3.
CM8530-FU_DKENHL_ENG.indd 28
2013-03-07 �� 12:12:00
Operating 29
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After the delay time,
the unit will be turned off.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
,,Note
Press SLEEP. The remaining time appears in
the display window.
Dimmer
Auto power down
This unit will turn off itself to save electric
consumption in the case were main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit has
been connected to other device using analogue
input.
Recording to USB
You can record a various sound source to USB.
(CD, USB, AUX, AUX-MIC, PORTABLE, FM)
1. Connect the USB device to the unit.
2. Select a function in which you want to record
by using FUNCTION.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
JUKE BOX list recording - After showing the
JUKE BOX list, you can record it to USB.
(Refer to the page 24)
3.Press
USB REC on the unit or USB REC on
the remote control.
3
Operating
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until dim off.
Advanced Operations
- If you connect both USB1 and USB2, press
T to record to USB1 or press I to record to
USB2.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
Pausing recording
During recording, press
USB REC on the
unit or USB REC on the remote control to pause
recording. Press it again to restart recording.
(TUNER/AUX/AUX-MIC/PORTABLE only)
CM8530-FU_DKENHL_ENG.indd 29
2013-03-07 �� 12:12:00
30 Operating
To select recording bit rate and
speed
1.Press
USB REC on the unit or USB REC on
the remote control for longer than 3 seconds.
2.Press C/V on the remote control or
Y/U on the unit to select a bit rate.
3.Press
USB REC on the unit or USB REC on
the remote control again to select the recording
speed.
4.Press C/V on the remote control or
Y/U on the unit to select a desired
recording speed. (AUDIO CD only)
3
X1 SPEED
- You can listen to music while recording it.
Operating
X2 SPEED
- You can just record the music file.
5.Press
USB REC on the unit or USB REC on
the remote control to finish the setting.
CM8530-FU_DKENHL_ENG.indd 30
Dubbing USB to USB
You can do dubbing a various sound source in
USB1 to USB2 on USB function.
1. Connect a USB device including desired sound
files to USB1.
2. Connect another USB device to USB2.
3.Press
USB REC on the unit or USB REC on
the remote control.
4. To stop recording, press I on the unit or
Z ENTER on the remote control.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
2013-03-07 �� 12:12:01
Operating
31
,,Note
yy It is not supported to record music stored
on bluetooth device.
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/WMA,
CD Only)
yy During recording MP3/WMA, there is no
sound.
yy For stable recording, the output sound level
goes down on its own when you record
music from CD to USB.
yy You can only change volume level between
MIN and 10 during recording. It will be kept
even after recording.
yy Do not remove the USB device or turn off
the unit during USB recording. If does not,
an incomplete file may be made and not
deleted on PC.
3
Operating
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “USB FULL”
or “NO REC” is displayed on the display
window.
yy Multi card reader device or External HDD
can not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 999 files.
yy It’ll be stored as follows.
AUDIO CD
MP3/WMA
The other
source*
* : TUNER, AUX and the like.
CM8530-FU_DKENHL_ENG.indd 31
2013-03-07 �� 12:12:01
4Troubleshooting
32 Troubleshooting
Troubleshooting
Problem
Cause & Solution
yy The power cord is not plugged in. Plug in the power cord.
No Power.
No sound.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
yy Check whether you select right function.
Press FUNCTION and check the selected function.
yy If not, connect speaker cables correctly.
Speaker cables connected correctly.
yy An unplayable disc is inserted. Check the playable disc.
The unit does not start
playback.
4
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to the page 35)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
Troubleshooting
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when
tuning by scanning preset channels).
Preset some radio stations, see page 25 for details.
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No speaker light
(CM8530, 8430 only)
CM8530-FU_DKENHL_ENG.indd 32
yy Check whether the speaker light cables are connected to the unit correctly.
Connect the speaker light cables to the unit correctly.
yy Check the speaker light effects by pressing SPK Lighting/DEMO.
2013-03-07 �� 12:12:01
5Appendix
Appendix 33
General specifications
General
Power requirements
Refer to the main label.
Power consumption
Refer to the main label.
Dimensions (W x H x D)
285 mm x 398 mm x 357 mm
Net Weight (Approx.)
8.2 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Bus Power Supply
USB DC 5 V 0 500 mA
Inputs
Auxiliary Input
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Microphone Input
6.3 mm jack
Portable Input
1.2 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
5
CD
40 to 20 000 Hz
Signal-to-noise ratio
75 dB
Dynamic range
80 dB
Appendix
Frequency Response
Amplifier
Model
Stereo mode
Surround
mode
CM8530
CM8430
CM8330
360 W x 2 (THD 10 %)
400 W x 2 (THD 10 %)
400 W x 2 (THD 10 %)
Front
360 W x 2 (THD 10 %)
400 W x 2 (THD 10 %)
400 W x 2 (THD 10 %)
Surround
180 W x 2 (THD 10 %)
Subwoofer
360 W x 2 (THD 10 %)
CM8530-FU_DKENHL_ENG.indd 33
400 W (THD 10 %)
2013-03-07 �� 12:12:01
34 Appendix
Speakers specifications
Front speaker (CM8530, CM8430, CM8330)
Model
CM8530
Type
2 Way 2 speaker
CM8430, CM8330
Impedance
6Ω
Rated Input Power
360 W
400 W
Max. Input power
720 W
800 W
Net Dimensions (W x H x D)
264 mm x 448 mm x 331 mm
Net Weight
8.9 kg
Surround speaker (CM8530)
Type
2 Way 2 speaker
Impedance
12 Ω
Rated Input Power
180 W
Max. Input power
360 W
Net Dimensions (W x H x D)
190 mm x 339 mm x 240 mm
Net Weight
3.8 kg
5
Subwoofer (CM8530, CM8430)
Appendix
Model
CM8530
Type
1 way 1 speaker
Impedance
6Ω
Rated Input Power
360 W
400 W
Max. Input power
720 W
800 W
Net Dimensions (W x H x D)
332 mm x 445 mm x 354 mm
Net Weight
10.5 kg
CM8430
yy Design and specifications are subject to change without notice.
CM8530-FU_DKENHL_ENG.indd 34
2013-03-07 �� 12:12:02
Appendix 35
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period
of time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for old vinyl records.
Maintaining the Unit
5
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Trademarks and
Licenses
CM8530-FU_DKENHL_ENG.indd 35
2013-03-07 �� 12:12:02
CM8530-FU_DKENHL_ENG.indd 36
2013-03-07 �� 12:12:02
Download PDF