LG F-3030A Owner's manual

LG F-3030A Owner's manual
MINI HI-FI AUDIO SYSTEM
OWNER'S MANUAL
MODELS: FFH-2020A/AX/L/S/AD
FE-2020E
FFH-3030A/AX/L/S/AD
FE-3030E
Please read this manual
carefully
before
operating your
unit.
Retain it for future reference.
Designs
without
and
specifications are subject
notice for improvement.
to
change
P/N:3828R-A041C
3
SAFETY INFORMATION
13
4
GETTING STARTED
13
4
Controls and Connections
Front Panel
14
5
Rear Panel
14
6
Display
14
7
Remote Control
Remote Control
8
Batteries
14
14
Operation
14
the Remote Control
8
Using
9
Connections
15
15
9
External Sources
15
9
15
10
Digital Outputs
Loudspeakers
Headphones
10
Antenna
16
9
10
11
Skipping
Display
Repeating Tracks
Random Play
Programmed Play
Reviewing the Contents of the Play List
Clearing the Programmed Play List
Adding Tracks to a Previously Programmed Play
Making Changes to the Play List
Using External (Auxiliary) Sources
Playing Tapes
Playback
Tape Counter
Recording Tapes
CD Sync Recording
Recording From Tape to Tape (Dubbing)
Time
14
4
8
Track
16
16
Setting the Clock
Basic Operation
17
ADVANCED FEATURES
17
Dual Alarms and Timer
17
Alarm and Timer
Auto Function Select
11
Volume
17
To Cancel
11
Tone
17
Alarm and Timer Notes
System
Adjustment
Adjustments
Check the Timer
Boost
17
11
EQ
18
TROUBLESHOOTING
19
SPECIFICATIONS
(Equalization)
11
Mute
11
Display
11
Demo Mode
Mode
11
FM Stereo/ANR
11
VMAx
12
12
12
12
12
13
13
13
(AM Noise Reduction)
ENJOYING YOUR SYSTEM
Listening
to the Radio
Automatic
Tuning
Tuning
Programming Preset Stations
RDS (Radio Data System) Reception
Playing CDs
Basic Operation
Stopping Play
Manual
13
Pause
13
Skipping
13
Direct Disc Access
13
13
Removing Discs
Changing Discs During Play
Important Notes
Searching Within a Track
13
Reverse Search
13
Forward Search
13
13
Setting
Discs
Please read this manual
carefully
before
operating your system, and retain it for
future reference.
the
or
11
12
2
Recording
Setting
11
Sleep
Timer
List
read first! Important Safety
Precautions!
MISE EN GARDE
CAUTION
Cet
RISK OF ELECTRIC SHOCK
DO NOT OPEN
appareil num rique de la classe B respecte toutes
glement sur le mat riel brouilleur de Canada.
les
exigences
de R
AVERTISSEMENT
CAUTION: TO REDUCE THE RISK OF
RISQUE DE CHOC ELECTRIQUENE-PAS OUVRIR
ELECTRIC SHOCK
DO NOT REMOVE
COVER(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
SERVICE PERSONNEL.
with arrowhead
symbol,
is intended to alert the
within
user
persons.
equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
point
within
an
WARNING:
TO REDUCE THE RISK OF FIRE OF ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Use of controls
or
of
adjustments or performance
specified herein may result
practical.
as
NOTE:
potential to the device.
equipment generates and uses radio frequency energy and
installed and used properly, that is in strict accordance with
This
manufacturer
a Class B computing device in accordance with the
specifications in subparts J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in
residential installation. However, there is no guarantee that
occur in a particular installation. If this equipment
a
interference will not
does
interference to radio
cause
determined
the
television
or
reception,
which
can
-
Reorients
or
Increase the
Connect the
-
it
capable
means
of
which
relocate the
equipment
receiving
antenna.
between the
separation
equipment
emitting
Consult the dealer
into
an
equipment
outlet
on a
and receiver.
circuit different from that to
plug.
When
replacing
use
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
this
fuse
the fuse
plug
cover
ELECTRONICS U.K.LTD
radio/TV technician for
experienced
IN THE UNITED
WIRING INSTRUCTIONS
This appliance is supplied with
type. Never
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
or an
(FOR CUSTOMERS
replacement
a
help.
KINGDOM)
BS1363
approved
3 amp fused mains
3 amp BS1362 approved
with the fuse cover omitted. To obtain a
always
use a
contact your
supplying
dealer
or
OSYNLIG LASERSTR LNING N R DENNA
PPNAD STR LEN
ATTENTION: Quand I
R FARLIG.
If the mains sockets in your home differ, or are not suitable for the
plug supplied, then the plug should be removed and a suitable
appareil
est
fitted. Please refer to the
Warning
ouvert,
ne
pas
s
exposer
radiations invisibles du faisceau laser.
the interior.
wiring
type
type
instructions below:
:
The mains
plug
destroyed.
A mains
mains
on
LG
.
of
BEAM.
This label is located
be
off and on, the user in
to correct the interference by one of more of the
by turning
which the receiver is connected.
Laser component in this product is
radiation exceeding the limit for Class 1.
DEL R
the
s
the limits for
-
THE CUSTOMERS IN
VARNING:
if not
instructions, may cause interference to radio and
television reception. It has been type tested and found to comply with
-
EUROPE)
If this product is marked with the CE-symbol,
is conformed to EMC regulation 89/336/EEC.
aux
of cable entry
point
The interference
procedures
in hazardous
radiation exposure.
(FOR
close to the
as
encouraged to try
following measures:
CAUTION
other than those
building,
to the
to constitute a risk of electric shock to
The exclamation
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
an
presence of uninsulated dangerous voltage within the
product s enclosure that may be of sufficient
magnitude
AMERICA)
Note to CATV system Installer:
This reminder is provided to call the CATV system installer s
attention to Article 820-40 of the NEC that provides guidelines
REFER SERVICING TO QUALIFIED
Explanation Graphical Symbols:
The lightning flash
equilateral triangle
IN THE UNITED STATES OF
(FOR CUSTOMERS
severed from the mains lead of this
plug
appliance must be
engaged in a
with bared wires is hazardous if
output line socket.
IMPORTANT
This
Compact
Disc
player
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LASER
LUOKAN 1
LASER LAITE
The
KLASS 1
LASER APPARAT
PRODUCT label is located
CLASSE 1
PRODUIT LASER
is classified
on
as a
CLASS 1
The wires in this mains lead
following
product.
CLASS
1
LASER
the exterior.
are
coloured in accordance with the
codes:
Blue
:
Neutral
Brown
:
Live
As the colour of the wires in the mains lead of this
correspond with the coloured markings identifying
plug, proceed as follows:
appliance may not
the terminals in your
The wire which is coloured blue must be connected to the terminal
IN CANADA)
CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE,
which is marked with the letter N
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
If
(FOR CUSTOMERS
INSERTED TO PREVENT BLADE EXPOSURE.
This class B
digital apparatus meets all requirements
Interference-Causing Equipment Regulations.
WARNING:
SHOCK HAZARD
-
of the Canadian
DO NOT OPEN
or
coloured black.
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L
or
coloured red.
13 amp BS1363 plug or any other type of plug is used, 3 amp
BS1362 approved fuse must be fitted either in the plug or at the
a
distribution board.
Warning
:
Do not connect either wire to the earth
with the earth
symbol
or
pin,
coloured green
marked with the letter E
or
green and
or
yellow.
MISE EN GARDE:
Pour viter les chocs
avec une
rallonge,
pas y ins
rer
lectriques, n utilisez pas cette fiche (polaris e)
ceptacle ou une autre prise si vous ne pouvez
un r
les broches
fond.
3
GETTING STARTED
Controls and Connections
Front Panel
¡
TM
£
¢
∞
§
Power button
Clock button
Alarm 1 button
Alarm 2 button
Set button
Tune
Down/Up (AM/FM),
Fast Forward/Rewind (Tape),
Skip/Search (CD) button
4
¶ Display
? CD Tray
ª Remote Sensor
' CD Tray Open/Close
G Volume knob
12
?
?
Tape A/B
button
Select button
Aux 1/2 Select button
button
fi
fl
‡
°
Boost button
EQ Select button
Counter Reset button
FM Stereo/ANR (AM Noise
Reduction) button
・ Tape Deck B Eject
a Tape Deck B (Rec/Play) Door
b CD/Tuner Program button
GETTING STARTED
Controls and Connections
c
Preset Up/Forward Play
(Tape)/Play (CD) button
d Record/Pause (Tape) button
e Aux 1/MP3 Input jacks
f Optical Digital Output jack
k
g
CD Control Buttons:
Preset Down/
Reverse Play (Tape) button
h Play Mode/Demo button
i Hi-Speed (Tape to Tape)
Dubbing
j Tape
31
32
(Play)
Speed (Tape
Dubbing button
Tape Deck A Eject
Headphones jack
to
Tape)
33
Disc 1 button: Disc Direct
34
Disc 2 button: Disc Direct
35
Disc 3 button: Disc Direct
36
Disc
button
Deck A
Normal
Door
Skip
Play
Play
Play
button
37
Random button
38
Time button
39
CD
40
CD Pause button
Sync (CD Synchro Dubbing)
41
Tuner/Band (AM/FM) button
42
CD Function button
43
Stop/Reset (Tape, CD,
Tuner
button
Presets) button
button
button
button
Rear Panel
option
44
45
46
(FFH-3030 Only)
47
48
49
50
51
44
Antenna terminals
47
45
Aux 2
48
46
Tweeter/Midrange Speaker Output
jacks (Model FFH-3030 only)
Input jacks
49
Coaxial
Digital Output jack
Subwoofer
Output jack
Speaker Terminals (Model FFH-2020)/
Speaker Woofer Section terminals
(Model FFH-3030)
50
Power Cord
51
Voltage
Selector
(Optional)
5
GETTING STARTED
Controls and Connections
Display
a
bc
de
fghi
jklm
n
op
qr
st
uv
12
31
30
a
b
c
d
e
f
g
h
i
6
Volume Level
Disc Number indicators
Information
Display for Level,
Function, Clock, Frequency, Tape
Counter, CD Time, Programmed
Play List
CD Track Numbers Remaining
CD Play Over indicator
CD Sync Recording indicator
CD Play/Pause indicator
Tape Direction indicators
Record indicator
y
`
29
28
j Rewind indicator
k Play Mode indicators
(Used only for Deck B)
l Hi-Speed Dubbing indicator
m Fast Forward indicator
n Tape A/B indicator
o CD Program indicator
p CD Repeat indicators
q CD Remaining Time indicator
r Mute indicator
s Sleep indicator
t Super Boost indicator
z
w
x
u
v
w
x
y
z
`
Treble Boost indicator
PowerBassTM indicator
Alarm 1/2 indicator
Timer
Recording indicator
Play indicator
RDS indicator-optional
ANR (AM Noise Reduction)
CD Random
28
FM Stereo indicator
29
FM Mono indicator
30
Memory
31
VMAx
indicator
indicator
indicator
GETTING STARTED
Controls and Connections
Remote Control
1
2
3
4
5
Power button
Mute button
Tuner/Band button
Tuner Preset ¤/ G buttons
Aux 1/2 button
Tape
Functions
6
7
8
9
)
!
@
#
Stop
button
Forward
button ?
Play
Record/Record Pause button
I
Fast Forward button ??
Tape
Tape
A button
B button
Reverse
Play
button ?
Rewind button ??
$ Sleep
button
CD/Tuner Functions
% Repeat button
^ Play/Pause button ?
& Reverse Skip or Search (CD)/
Tune Down button ?? ??
* Stop/Clear button
( Forward Skip or Search (CD)/
Tune
Up
button ?? ??
O Program (CD) button
O Disc Skip button (CD)
Display
O
U
U
U
Mode button
VMAx button
EQ Select button
Boost Select button
Volume Control G / ¤ buttons
7
GETTING STARTED
Remote Control
Batteries
Before
using
Operation
Using
the Remote Control
Control
Range
the remote control for the first
time, insert two AAA (UM-4, IEC R03)-type highquality batteries, as shown in the diagrams
below. Be
sure to observe correct battery
polarity (+ and --), as installing the batteries
incorrectly may damage the remote. Do not use
different types of batteries together, and do not
mix old
ones
Open
the
with
new ones.
battery
cover
Insert two AAA batteries
?
When you are not going to use your
an extended period of time, such
for
you go
on
vacation,
remove
System
as
when
the batteries to
prevent possible electrolyte leakage.
?
After
a
period
of time, when the remote
control fails to operate accurately at maximum
distance from the unit (23 feet, or 7 meters),
replace
8
the dead batteries with
new ones.
The remote control device is
designed
for
a
maximum range of 23 feet
(7 meters).
NOTE:
Strong light or obstacles between the
the operation of the remote control.
remote control device and the main unit may interfere with
GETTING STARTED
Connections
External Sources
Two
are
marked AUX 1 and AUX 2
RCA-type jacks
provided. The front input jacks (AUX 1/MP3)
should be used for temporary connections, such
as an MP3 player, MiniDisc (MD) player, video
video game. The rear input jacks
should be used for longer-term connec-
camera or
(AUX 2)
tions, such
as a
VCR
CD Recorder.
or
Speakers and electronics have corresponding (+)
and (--) terminals. LG has used red to denote the
(+) terminal and speaker wire, and black for the
(--) terminal and speaker wire. It is important to
connect both speakers identically: (+) on the
speaker to (+) on the main unit, and (--) on the
speaker to (--) on the main unit. Wiring "out of
phase" results in thin sound, weak bass and a
poor stereo
Front
Insert the bare end of the red
right speaker
(+) wire of the
(+) terminal on the
main unit that is marked R
end of the black
into the black
marked L
.
Insert the bare
the main unit that
on
Follow the
.
connect the wires
and terminals
49
(--) wire of the right speaker
(--) terminal
49
is marked R
are
image.(FFH-2020)
into the red
the left
on
procedure to
speaker to the jack
same
the back of the main unit that
on
46 49
.
Main
speaker
output jacks
(high frequency)
Insert the bare end of the red
DIGITAL OUT
into the red
right speaker
L-AUX1/ MP3-R
DIGITAL OUT
(+) wire of the
(+) terminal on the
49
main unit that is marked R
AUX1/MP3
R
end of the black
L
into the black
Optical-fiber
is marked R
cable
Insert the bare
on
Follow the
.
the terminals
marked L
DIGITAL
AUDIO OUT
49
the main unit that
on
SUBWOOFER
procedure
speaker to
(Optional)
Left
R
WOOFER
SUBWOOFER
Subwoofer
Speaker
1
Connector 2
L
Digital Outputs
porary connection of an MD recorder or any
other portable device that has a digital input.
Coaxial
Output
should be used for
digital inputs
or
are
the Optical Digital Output, remove the
protection cap from the connector and
firmly connect an optical digital cable (not
supplied) so that the shapes of both the cable
and the connector match. Keep the dust
protection cap in a safe place, and always
re-attach the cap when not using the connector
to prevent dust from entering the connector.
use
dust
Be
Loudspeakers
sure
necting
to turn Power
the
¡1
In these instructions, the
"left
from
off before
con-
loudspeakers.
"right speaker" and
speaker" refer to the speakers as viewed
the listening position.
System With
The FFH-2020 and FFH-3030 both feature
an
Left
Figure
Speaker
Right Speaker
2
(FFH-3030)
In order to
clarity,
the
provide superior definition and
FE-3030E speakers use a different
method of connection for the tweeter and
sure
er as
a
Output jack 48 that can be used
with any unit powered subwoofer recommended
by your unit dealer. The addition of a powered
subwoofer dramatically extends and improves
your system's bass response, and is highly recommended either at the time of initial purchase
or as a future upgrade. Using a single RCA cable
Subwoofer
Red
sections. For proper performance, be
to connect all three wires from each speak-
midrange
To
Your
External Powered Subwoofer
MP3 encoder. Neither
coaxial cables
Right speaker
3
Using
Red
Black
optical
supplied with this product
and, if not included with the connecting unit,
should be purchased separately.
nor
Black
more
permanent hookups, such as a CD recorder, MD
recorder, high-end computer sound card with
speaker
(Optional)
Coaxial
rear
Figure
R
panel Optical f and a rear panel
47
Digital Output are provided. The
Optical Digital Output is intended for tem-
A front
The
Right
are
Left
front
L
.
INPUT
Figure
R
the main unit that
same
to connect the wires from the left
MD recorder,
MP3 player etc.
L
Connector 1
(--) wire of the right speaker
(--) terminal
49
.
Subwoofer
Speaker
described below:
Insert the
yellow RCA-type plug from the right
yellow jack on the back of the
main unit that is marked R 46 (Speaker
Connector 1 in Figure 3).
Note: Never insert the yellow plugs
into any equipment other than the
main unit or you may cause damage to the
speakers that is not covered by your
speaker
into the
(not included), connect the subwoofer output to
the L or R input of the powered subwoofer (the
use of a Y-cable is not necessary but is OK). Set
the main unit to a normal listening level, and
adjust the level, frequency and phase controls
on the powered subwoofer as directed in the
subwoofer's owner's manual.
warranty.
Never insert any plugs other than the yellow plugs attached to loudspeakers into
the
yellow jacks on the main unit
you will cause damage that is not
by your warranty.
46
or
covered
9
GETTING STARTED
Connections (cont.)
Headphones
Connecting headphone
ables the loudspeakers in
vate listening session.
a
32
(3)
3
2. Choose between the 24-hour
AREA
BAND(FM/MW/LW)
automatically
provide a pri-
MW/LW
order to
antenna
For MW/LW
the
loop
reception,
antenna
the Preset
display by pressing
dis-
loop
Preset Down
(aerial)
g
display or 12-hour
Up c or the
buttons.
connect
(aerial)
to the
terminal marked MW/LW
3. Press the Set/Station button
Antenna
setting
and
proceed
to the next
∞
to store this
step.
FM external
Important
antenna(aerial)
(not supplied)
FM Antenna Connection
Unless radio
signals
are
antenna is necessary.
MW
/LW
very weak,
Simply
no
FM
external
75
4. Set the hour
connect the sup-
FM indoor antenna wire to the terminal
plied
marked FM
the back of the unit
on
44
by pressing
the Preset Down
g
the Preset
Up c
or
buttons.
.
2
(4)
BAND[FM/AM(MW)]
AREA
AM Antenna Connection
Connect the
AM
supplied
terminal marked AM
on
loop
For
antenna to the
the back of the unit
44
the
AM(MW) reception, connect
antenna (aerial) to the
AM(MW) loop
(aerial)
loop
5. Press the Set/Station button
antenna
terminal marked AM
∞.
.
FM external
antenna(aerial)
(not supplied)
For the models for other countries
For the
European
and U.K. model
figure (1), (2).
figure (3), (4).
6. Set the minute
AM
FM
75
(1)
2
BAND(FM/AM)
Setting
FM external
75 ohms coaxial cable
AM
loop
(aerial)...
antenna
included
FM indoor
Setting the
example of
Although
Position
it for the
clock will
clock will be demonstrated with the
9:25 AM.
unit will retain the clock
setting
when
you power it down into the Standby mode, the
setting will be lost if the unit is unplugged or the
GND
FM
reception
electrical power is interrupted for more than 10
seconds. In that event, the clock setting will be
(2)
3
BAND(FM/MW/SW)
MW
loop
antenna
a
blinking
"---
FM external
(aerial)
antenna(aerial)
(not supplied)
When
setting
the time, remember that
is at 12:00 AM and
noon
midnight
is at 12:00 PM.
coaxial cable
reception
1. Press the Clock button
SW
MW
TM. (If the
clock
was
press and hold the Clock button
than 1.5 seconds.)
previously set,
for
GND
FM
MW ANTENNA WIRE
TWISTED LINE
FM ANTENNA WIRE
more
"12:00 AM" will blink in the
Display c,
to
indicate civilian 12-hour time. Press the Preset
Up c or Preset Down g button to display a
blinking "0:00", which denotes 24-hour military
time.
10
:
---".
Position it for the
best
erased, and the unit will display
AREA
(aerial)
FM indoor antenna
SW Antenna
the Preset
Up c
g buttons.
7. Press the Set/Station button
the Clock
AM
best
by pressing
the Preset Down
AREA
antenna(aerial)
(not supplied)
antenna(aerial)
or
resume
normal
∞,
operation.
and the
GETTING STARTED
Basic
Auto Function
Select System
Tone
in
new source
to press
a
single step,
is, if, for
without
input or source select
example, the radio is
an
having
Each time the Boost button
tone
VMAx is
changes
PowerBass
fi
is
pressed,
the
Treble Boost
Boost
Super
button. That
PowerBass: Reinforces low
?
Treble Boost: Reinforces
the unit will
?
Super
,
switch to CD mode,
frequencies
high frequencies
Boost: Reinforces both bass and treble
rather than the tuner.
changer
(You
EQ
can
following sources and functions:
Using the remote control
fl
Press the EQ button
Press the EQ button
desired sound mode is
4
Play/Pause ? button ^
Tape: Forward ? and Reverse ?
CD:
buttons
[email protected]
?
?
?
buttons
Play
(DISC 1, 2, 3)
33 34 35
Volume
Adjustment
Turn the Volume knob
the sound level,
or
G
This is
counterclockwise to
warning to lower the volume in
order to prevent possible damage to your loudspeakers. You may also adjust the volume by
pressing the Volume Up or Down buttons U
a
deceiving. Over time your hearing
"comfort level" adapts to higher volumes of
sound. What sounds "normal" can actually be
loud and harmful to your hearing. Guard against
this by choosing a safe level BEFORE your hearing adapts.
be
To Establish
?
?
it
a
?
JAZZ:
and without distortion.
a
Comfortable
Sound Level:
Do not exceed that level.
Taking a moment to do this now will help to prehearing damage or loss in the future. After
all, we want you listening for a lifetime.
a
sound. Press the VMAx button
either the main unit
activate
or
?
or
the remote
be
a more
O
on
to
deactivate the VMAx mode. The
VMAx indicator
on
the
display
31
will be lit
the
cur-
until the
music
in front of the imaginary line between the two
speakers, facing the speakers. The speakers
should be facing the same direction, and should
be placed even with each other. If used in a
video application, the speakers should be to the
right and the left of the screen, following all the
other guidelines above. Please note that speakers are not shielded, and if placed too close to
the screen may cause interference and degradation of the picture.
Speaker
Placement
Mute
10 feet
Press the Mute button 2 to mute your unit.
The Mute function silences the unit, which is
convenient for
answering
The Mute indicator
play.
to
the
telephone,
etc.
r
will appear on the disPress the Mute button 2 a second time
resume
normal
Speaker
play.
Display
Placement in
to the music. You
,
or
Video
Application
10 feet
select different
can
displays by repeatedly pressing
Mode button
a
Mode
(On Remote Control)
For your visual enjoyment, your system offers a
spectrum lighting display that "dances" in time
the
Display
lighting
you may turn the
Standard Stereo
off.
Start your volume control at a low setting.
Slowly increase the sound until you can hear
comfortably, clearly
used with music and movies to create
(On Remote Control)
display
Safe Level:
Once You Have Established
?
CLASSICAL:
the remote control.
can
fl repeatedly
Optimized for orchestral
Optimized for jazz music
?
clockwise to increase
decrease it. If you turn the volume up above the
maximum level, the volume level flashes in the
Sound
display
Metal music
CD: Disc Direct
on
to
displayed.
FLAT: No additional equalization
POP: Optimized for Top 40, R & B, Soul and
Country music
ROCK: Optimized for Hard Rock and Heavy
2. On the unit
display.
once
rent sound mode.
1.
Play
signal or Dolby Pro Logic -encoded
material using only two loudspeakers. It can
effect, the listener should be approximately 3m
(Equalization)
the
Tuner: Preset G / ¤ buttons
an
when VMAx is active. In order to maximize the
where the various function buttons will affect
open the disc tray to change discs without
affecting the tuner operation.) This applies for
creates
ambient, simulated surround-sound stage from
enveloping
?
the CD
proprietary technology that
stereo
follows:
as
playing and you wish to switch to playing a CD,
you need only press the Disc 1 button 33 and
automatically
VMAx
Adjustments
Boost
This system allows you to automatically switch
sources by selecting a function associ-ated with
the
Operation
Demo Mode
With the unit
the
plugged
in but turned off, press
a continuous
Play Mode/Demo button h for
visual
display
again
Press it
of the
system's features.
a display of the
to return to
current time.
VMAx Virtual Surround
vent
FM Stereo/ANR
(AM Noise Reduction)
When the FM radio
signal
is too weak to be
received in Stereo mode without interference,
press the FM Stereo/ANR button
to Mono mode for
°
improved reception.
to switch
When
AM radio transmissions, press this
button to reduce unwanted noise.
recording
Real
Speaker
Phantom
11
ENJOYING YOUR SYSTEM
to the Radio
Listening
Automatic
1. Turn
the Power
on
Tuning
¡ 1.
repeatedly to choose
LW : optional) radio.
either AM
3. Press and hold the
Tuning Down/Up
or
FM(or SW,
Press and hold the Preset G / ¤ buttons
cg4
(Tune ¤/Tune G) button §&( for
than 0.5 seconds. The unit will
automatically tune in
broadcast strength.
a
the Power
appears,
until the desired preset number
or press the buttons repeatedly.
more
RDS (Radio Data System)
Reception OPTIONAL
and
scan
station of
acceptable
-
What is RDS?
Manual
on
in Preset Stations:
Tuning
3
2. Press the Tuner/Band button 41
1. Turn
preset number is flashing, to store the
station at that preset.
Tuning
¡ 1.
3 repeat-
2. Press the Tuner/Band button 41
edly to choose either AM or FM(or SW, LW :
optional) radio.
3. Press the Tuning Down/Up (Tune G/Tune ¤)
button §&( briefly and repeatedly, until
the desired station is tuned.
RDS (Radio Data System) is a system gradually
being introduced on FM in many countries,
whereby an inaudible stream of data is transmitted in addition to the normal radio signal.
The data appears as text in the front panel
Information Display c. This data can contain various types of information, including station identification, traffic and weather information and
a
list of alternative
radio station
Preset
Stations
Programming
selected
ton
41
by pressing
1. Press the Tuner/Band button 41
seconds
play.
Memory:
(that is, the tuner
the Tuner/Band but-
press and hold the CD/Tuner
button b O for more than 1.5
so
The
that RESET flashes in the dis-
Memory
press the
Stop/Reset
button
Station Preset Into
a
select either the AM
or
*.
3
to
FM band.
to tune in the desired station.
the preset number to flash
and the Memory indicator 30 to
causes
appear in the display. The second press
stores the station to that preset number.
4.
Alternatively,
to store the station at
a
par-
ticular preset number of your choice, press
the CD/Tuner Program button bO
ONCE,
so
that the next available preset
display. Press the
number flashes in the
Preset G / ¤ buttons
a
to choose
preset number, then press the CD/Tuner
Program
12
cg4
button
b O again,
as
described
display
an
RDS transmission is received, the
shows the station
name
and the RDS
z lights.
a
display
of the station fre-
∞.
?
RDS is
?
The station
an
only
available for FM
name
is
Reception.
displayed automatically
RDS station is received. However, if
the
Preset number, press the CD/Tuner
Program button bO TWICE. The first
c,
3. When
when
3. To store the station at the next available
press
to
Notes:
2. Press the Tune ¤/Tune G buttons
§&(
3
the AM
quency, press the Set/Station button
Memory:
1. Press the Tuner/Band button 41
on
above.
4. To return to
display,
43
for the
band.
2. Tune in the desired station
indicator
indicator 30 will
appear in the display.
2. While RESET is flashing in the
Entering
was
3),
Program
frequencies
received.
select FM. RDS is not available
To Clear All Presets From
1. While in Tuner mode
being
while the
signal is not strong enough, it may be
possible to receive the audio signal without
any RDS data.
?
When an RDS station is first tuned in, the
station
name or
other RDS information may be
garbled for a few seconds while unit processes
the signal. This is normal, and the correct information will appear automatically within a few
seconds.
ENJOYING YOUR SYSTEM
Playing CDs
Your system will play discs displaying the
It will
Compact Disc Digital Audio logo
.
Stopping Play
Press the
also
is
play properly finalized CD-R discs. The unit
not able to play CD-RW, DVD, Video CD, com-
puter data discs, or any other type of disc
except CD or CD-R, as noted above.
Stop/Reset
button
43
Do not tilt
To
40
^.
play, press the CD Pause ? but^ again, or press the Play button
c^.
?
?
Discs
During play or in the Stop mode, press the
Skip button 36 O to proceed to the next
Disc
disc
in order.
for Disc 1
Basic
2. Press the CD
Skip button 36 O is pressed while
playing, This unit will skip to the next
disc and start playing it. However, if the Disc
Skip button 36 O is pressed while the unit is
stopped, it will rotate the disc tray to the next
disc, but it will NOT start playing.
a
Operation
1. Press the CD Function button 42
Open/Close
.
'
button
to
open the disc compartment.
3. Load up to three discs with the label
side up. Each tray is numbered 1, 2 or 3
one or
Place discs
on
Removing
(8cm) disc, put it in
the inner depression of the tray. Never
place more than one disc at a time in
any of the three tray positions.
button
close the disc compartment.
5. Press the Play (or ? on remote
button
c^
Play begins
to start
nearby
compact disc in
one
television is distorted,
heard from
nearby radio,
a
or
move
a
if static is
this unit
further away from the affected device.
Searching
You
search for
Within
a
Track
particular point in a track
during play by monitoring the high-speed cueing
sound, or by observing the CD counter in the
display
can
a
c.Reverse Search
button
§&
and release it at the desired
point.
Forward Search
'
tray, press the Disc Skip button
on
O
to
Changing
control)
the left-
hand side of the carousel
just before closing the
disc compartment, and proceeds counterclockwise around the carousel (in number order). All
discs are played once only.
During playback, empty trays are skipped, and
the unit proceeds counterclockwise to the next
tray. The numbered indicator of any skipped tray
will go out in the display b.
on
Discs
During Play
The unit allows you to exchange two of the
discs in the carousel while the third disc is play-
ing. Simply open the disc compartment during
play by pressing the CD Open/Close button
',
and
remove or
insert discs
above. The disc located
the next disc to be
on
as
described
the left side will be
played after you close the
disc compartment. This operation is not available during programmed play.
§(
and release it at the desired
point.
Track
To return to the
Skipping
of the current track,
tap the Reverse Search ?? ?? button
§&
to
The total number of audio tracks available
36
rotate the disc carousel.
play.
with the disc located
button
Discs
Press the CD Open/Close button ' to open
the disc compartment. You can remove two
discs at a time. To remove the disc in the back
the
3-in.
Open/Close
than
Press and hold the Forward Search ?? ??
carousel. Place the next disc in tray 3.
4. Press the CD
more
the unit.
disc tray at the same time.
If, during CD play, the video image of
will continue to the next disc in order.
Playing three discs
placing two discs, press the
Disc Skip button 36 O to rotate
a
one
trays 1 and 2.
After
To load
of the Disc Direct
(Disc 1, 2 or 3)
buttons 33 34 35 to start playing the disc in
that tray. After it plays through that disc, unit
two discs
place
or
Press and hold the Reverse Search ?? ??
Direct Disc Access
carousel:
Playing
disc is
Press
counterclockwise around the
going
Do not
If the Disc
for Disc 2
Tray
the unit with discs
one
Skipping
Tray
the discs
damage
resume
ton 40
or move
loaded. This may dislodge the discs.
Usage under these conditions may
Pause
Press the CD Pause ? button
Notes
Important
*.
To
beginning
once.
skip track(s)
backward
one
by
one,
Reverse Search ?? ?? button
repeatedly.
skip track(s)
To
forward
one
by
one,
Forward Search ?? ?? button
tap the
§&
tap the
§(
repeatedly.
REMEMBER
--
TAP the button
§&
to
CHANGE tracks; but PRESS and HOLD the
?? ?? / ?? ?? button §&( to search
WITHIN
a
track.Time Display
Press the Time button
38 to
show the time
remaining on the current disc cq. Press
it again to return to a display of the time
elapsed c.
the disc
being played will be displayed at the
top of the display d. As each track finishes
playing, its corresponding number will go out.
When
a
disc has
"OVER" indicator
more
e
number will appear
than 16 tracks, the
will
only
light,
and the track
in the Information
Display c.
13
ENJOYING YOUR SYSTEM
Playing CDs
Basic
Operation
Repeating
The
Repeat
remote
function is
control, and
You may program
only
available
using
the
cannot be accessed from
panel buttons.
Repeat play has been selected,
Once
the
player
will continue to repeat the selection until you
cancel it by pressing the Repeat button %
once, so that the
indicator
Repeat
list of up to 20 tracks
anywhere on up to 3 discs.
1. While in Stop mode, press the CD/Tuner
p
in the
display
Repeat play may be selected either during play
or in the Stop mode. If a programmed play list is
playing, you may select either one track to
repeat, or all discs to repeat the entire play list.
goes out.
2. Press
one
34 35 or
select
a
of the Disc Selector buttons
the Disc
Skip
button 36
O
position,
then press the CD
?? ??
§&
or
to select the disc
?? ??
so
already
Skip/Search
§(
33
?? ??
buttons
One Track
Press the
that it appears in the
Skip/Search
?? ??
button
%
ONCE to
§&
or
example, to select Track 6, press the
Skip/Search ?? ?? §& or ?? ??
§( buttons repeatedly until track number
"06" is displayed c.
to store the track in the
Repeat
One Disc
Press the
Repeat
Repeat
button
One Disc
(or ? on
start play.
remote
p,
%
TWICE to
and press the
display
Play
control) button c ^
to
Repeat Only Selected Tracks
Program the desired tracks as described in the
next section, and press the Repeat button %
while in Programming mode to display
Repeat One or Repeat All Disc p.
If you program a play list during Repeat Play of
an entire disc, the display will change to
Repeat All Disc p.
Random
Press the Random button
and the unit will
play
Play
37
before
the tracks
or
on
during
the
selected disc in random order. The Random
indicator
to normal
button
bO
5. Repeat Steps 2 through 4 to program up to
20 tracks into your play list. If you previously
selected the correct disc, you do not need to
repeat Step 2 in order
to program additional
tracks into your
Repeat All Tracks on All Discs
Press the Repeat button % THREE times to
display Repeat All Disc p, and press the
Play (or ? on remote control) button c ^
to start play.
play,
Program
play list.
y
will
play,
light
in the
display.
To return
press the Random button 37
play list.
6. Press the Play c^ button (or ?
remote control) to start play.
on
7. If you stop play in the middle of the play list
so that the program does not appear in the dis-
list will remain stored in memory,
but the next press of the Play button c 7
play,
will
the
play
the unit will
14
randomly
select
a new
track.
previ-
a
?
?
Turn off the Power
?
Press the CD
¡1.
button
Open/Close
'.
Adding Tracks to a Previously
Programmed Play List
Program button bO
repeatedly to step through the play list until
"00" is displayed as the track number c.
1. Press the CD/Tuner
2. Select the desired track
on
the desired disc
by pressing the Disc Direct buttons 33 34 35
or Disc Skip button 36 O as necessary, and
then by pressing the CD Skip/Search ?? ??
§& or ?? ?? §( buttons to proceed to
the correct track.
3. Press the CD/Tuner
Program
buttons
bO.
play. To
programmed play list, press
the CD/Tuner Program button bO, which
will bring the program back to the display
1. Press the CD/Tuner
co.
repeatedly
8. If you program several tracks on the same
disc out of order, e.g., Track 8 before Track 7,
the selected step is displayed c. This track
will be replaced in the play list by the new track
JBL
you
cause
resume
the entire current disc to
playing
Soundgear will play the tracks back in the
programmed order, even though the Track
Number Display d lists the programmed
tracks in numbered order.
Skip 36 O button does not operduring programmed play.
10. Random play cannot be selected while a
programmed play list is playing.
9. The Disc
ate
Making Changes
to the Play List
the
are
Program
button
bO
until the disc and track number of
about to program.
2. Select the desired track
on
the desired disc
by pressing the Disc Direct buttons 33 34 35
or Disc Skip button 36 Oas necessary, and
then by pressing the CD Skip/Search ?? ??
§& or ?? ?? §( buttons to proceed to
the correct track.
3. Press the CD/Tuner
the
once, it
List
While in Stop mode, press the CD/Tuner
Program button bO, and then press the
Stop/Reset button 43 *.
If you tap the Forward Search button §(,
the unit will randomly select a new track. If you
§&
Programmed
three different ways to clear
programmed play list:
It is not
will go to the beginning of the current track. Tap
the Reverse Search button §& again, and
the
are
again.
tap the Reverse Search button
step through the entire play list.
Play
There
buttons to select the desired
4. Press the CD/Tuner
to
Clearing
CD
display
Repeat One p, and press the Play (or ?
on remote control) button c ^ to start play.
Repeat
bO
ously
§(
num-
ber, track number, and program number.
Continue to press the CD/Tuner Program but-
once
track. For
Repeat
Stop mode, press the CD/Tuner
Program button bO to display the disc
in
display c.
3. Use the CD
the Contents
Play List
While in
ton
to
disc. If the correct disc is
a
of the
play
bO.
button
Program
the front
Reviewing
Programmed Play
(cont.)
Tracks
Program
possible to delete
programmed play list.
a
button
single step
bO.
from
ENJOYING YOUR SYSTEM
Using External
(Auxiliary) Sources
1. Switch
MP3
on
player)
AUX 1
or
the
auxiliary
device
(TV, VCR
connected to the front
or
or rear
AUX 2
jacks.
desired auxiliary
Playing Tapes
6. In either the
Playback
This system can only use normal bias tapes. It is
equipped with two cassette decks, "A"
and "B". Deck A is used
for
only
playback,
and
device by repeatedly pressing the Aux 1/2 button ?5.
3. See the Recording section on page 16 for
information on tape recording from an auxiliary
will stop at the end of each side of the tape.
Deck B may be used for either playback or
source.
button
2. Select the
recording,
and includes
which
be controlled with the
can
auto
an
reverse
Play
Mode
button 12
Tape A/B
)!.
If
necessary, press the button again to select the
other deck. This unit will display which deck has
been selected
a
cn.
The unit will not select
deck that does not have
4. Auto
Press the
Play
a
tape loaded.
(for Deck B only):
reverse
Mode button
h repeatedly to
select:
?
One side
ing
Unit
:
the listener and
to the end
Rewind indicator
Stop
Play mode,
or
press
??
# button. The
§
j will light in the display.
playback,
43
m
press the
Stop/Reset
6.
the unit will stop
automatically
at
.
the door to close it.
Gently push
or
the end of the tape.
Insert the cassette with the tape side to the bottom and the side that you wish to hear facing
3. Press the
point,
press the
button to
display.
the Rewind ?? ??
Alternatively,
2.
the front.
in the
light
7. To end
¡1.
§ ??9
of the side. The Fast Forward indicator
button
on
Play mode,
To rewind, in either the
capability
Open either cassette deck A or B by pressing
gently on the door at the Eject position ・ 31
or
fast forward to the desired
will
h.
1. Switch the unit
Stop
Fast Forward ?? ??
plays the side that is facstops automatically at the
The
Tape
Tape Counter
Counter
Information
Display
During Play
or
c
c
will apppear in the
Tape mode.
when in
Fast Forward, the
increases and,
Tape Counter
during rewind, the tape
counter decreases.
While in
Stop
mode
or
Counter Reset button
to
zero.
point
This
can
while
‡
playing,
be convenient for
at which you wish to
press the
to reset the counter
begin
a
locating the
recording
session. Note, however, that the unit will auto-
matically
rewind the tape to its
beginning
will not stop when the counter reaches
and it
zero.
end of that side.
?
All sides
:
Unit
plays the front and
automatically at the
sides and stops
end of the tape.
reverse
?
Endless
loop
:
Unit
plays
both sides of
tape six times in succession.
display the current Play mode k.
Play button c7 to begin playthe Reverse Play button [email protected] to
The unit will
5. Press the
back. Press
play
the
reverse
side of the tape. The direction
of the tape will be indicated in the
display h.
15
ENJOYING YOUR SYSTEM
Recording Tapes
Recording From a CD, Radio
or Externally Connected
Equipment
Recordings
only
can
be made
Deck B.
using
Only
normal bias tapes should be used.
1. Power the unit
on
¡1,
and insert
or
§#
Rewind
point where
§9
Make
buttons to
you wish the
proceed to the
recording to start.
to
record
Play Mode h button repeatedly
or to
recording on one side only
both sides in auto
on
mode
reverse
,
desired material that
recorded earlier
was
in the session.
3. Select the
source
Aux 1/MP3, Aux 2
input: Tuner, CD,
41 42
d8
the unit in the
mode. The
Record indicator
i
5. Press the
button
ing
Play
the
c7
reverse
[email protected]
to
tape,
or
record-
begin recording
onto
side of the tape. The direction of
6. The
recording
button
d8.
the
h.
session
recording
may be interrupted to skip over
undesired material by pressing the Rec/Pause
To
resume
the Rec/Pause button
ton
press either
the Play but-
recording,
d8,
or
c7.
7. To end the
recording
session
(but
not the
input), press the Stop/Reset button 43 6.
Alternatively, the unit will stop recording automatically
the tape.
16
a
when it reaches the end of
only
normal bias tape
to select each deck
blank tape into Deck B. Use the Fast
or Rewind §# buttons to
§9
Play Mode h button repeatedly
or to
recording on one side only
on
both sides in auto
reverse
mode
over
desired material that
was
.
recorded earlier
tape
recording
a
track
on
the first side of the tape, it will record that track
completely on the reverse side.
6. Press the CD
Sync
button
The unit will
39
to
begin
the tape in Mute
mode for 7 seconds in order to skip the tape
recording.
play
leader; then the CD player will begin playing and
the unit will
on
facing
to the
toward you.
begin recording.
The system will not allow you to select a different
input without stopping the recording session.
so
that you can rewind each
the Rewind button
beginning using
§#.
3. Press the Normal Dub button
k to
automat-
ically start dubbing at normal (regular playback)
speed. Alternatively, press the High Dub i
button to automatically start dubbing at twice
normal playback speed. The quality of the
recording may be better if Normal Speed dubbing is used rather than High Speed Dubbing.
When dubbing at high speed, turn down the
Volume GU to prevent possible damage to
the loudspeakers by the high-pitched playback
of the
4.
If unit is unable to finish
recorded cassette in Deck A
Tape A/B button 12 )! to
select the tape function, and press it repeatedly
proceed to the point where you wish the recording to start. Make sure you have enough blank
tape available to fully record the CD or programmed play list.
record
previously
side you wish to record
to select that track.
Forward
a
source
in the session.
the
Use
2. Press the
,
begin
to
the tape will be indicated in the display
The unit will automatically start the
input source and
simultaneously.
1. Insert
again.
We do not recommend that you use the endless
as it may result in rerecording
loop mode
will flash.
onto the front side of the
Reverse button
place
to
recording.
with the side you wish to copy facing toward
you. Insert a blank cassette in Deck B with the
to select
4. Press the Rec/Pause button
of
the CD compartment
5. Press the
?^35.
Recording Ready
capable
.
in this system.
4. Insert
.
This system will only dub recorded materials
from Deck A to Deck B, since only Deck B is
Open the CD compartment with the CD
Open/Close button ', insert discs and close
§&(
We do not recommend that you use the endless
as it may result in rerecording
loop mode
over
1. Select the CD Function 42
If you wish to record only one track, use the
Forward or Reverse Search buttons
2. Press the
to select
or
cassette.
3. If desired, program a play list of selected
tracks (see Programmed Play section on p. 14).
proceed past the tape leader to
avoid missing the beginning of the source
signal.
sure
CD
Recording From Tape
to Tape (Dubbing)
Sync Recording
Sync recording function dubs a complete
programmed tracks automatically onto a
2.
blank
a
tape into Deck B. Use the Fast Forward
CD
The CD
tape.
During dubbing,
have
the Pause button
d8
will
change the speed of
the dub during a dub. Although the Volume
control GU will affect the level of playback,
it will have no effect on the recording level,
which is not adjustable.
no
effect. You cannot
Stop/Reset button 43 6 to end
dubbing session. Alternatively, the unit will
stop automatically at the end of the tape.
5. Press the
the
ADVANCED FEATURES
Dual Alarms and Timer
Alarm and Timer
8. Press the Set/Station button
Setting
and the
the system to either play or record two different
sources at two different times, for as long a
as
1. Make
sure
you choose.
displayed c
the current time
is
by pressing the Clock button TM; see
the Setting the Clock section of this manual on
p. 10 to set the clock correctly. If you plan on
selecting the Tuner, make sure that the desired
station has been programmed as a preset (see
Programming Preset Stations section on p. 12).
correct
2. Press the Alarm 1
£
or
Alarm 2
¢
button
to enter the timer
setting mode. (If the timer
previously set, press and hold the button
for more than 1.5 seconds.) The Alarm/Timer
clockface indicator will appear in the display
w
and the available
--
source
selections
will flash in the
will
menu
now
ting the time the system will turn off.
9. Program the time to turn off in the same way
as the time to turn on, by using the Preset
Down or Up buttons cg4 to select the hour
minute, and the Set/Station button
or
enter the
10. Set the volume level
Down
∞
by pressing
the Preset
11. Press the Set/Station button
∞
OFF TIME
(AM 7:10)
(AM 8:00)
7. If the
settings
Alarm number
play w,
(1
or
ton is
(b) Press the Set/Station button ∞ to
Play or Rec.
Play: Tuner plays only
Rec: Tuner plays and is recorded by
time and
If the alarm
it
that
sure
a
blank cassette is
loaded in Deck B and rewound to its
or
desired
cg4
to select
a
or
Up
button
desired radio station. If
programmed
to
preset number.
display
Press the Set/Station button
recording,
to select
or
desired
5. Set the
Up
starting point.
hour by pressing
buttons
The minutes will flash
Up
∞
to enter the
source on.
c.
by pressing
buttons
in Alarm mode. Press the Alarm
to defeat the
alarm, which will
Tape
or
is selected for
disc is in the disc drawer
turn
on
Alarm 2
ON TIME
OFF TIME
ON TIME
OFF TIME
(AM 6:00)
(AM 7:10)
(AM 7:00)
(AM 8:00)
Setting the
Sleep Timer
(Available only using the remote control)
When the sleep timer is used, the power is
automatically turned off after the specified time
has elapsed.
1. To specify the time until the power is turned
off, press the Sleep button $. "SLEEP 90" will
appear in the display c for about 5 seconds.
This means that the unit will turn off automati-
cally
ton
after 90 minutes. Each time the
$
is
pressed
or no
playback,
cassette
not
if
tape
instead.
3. When CD is selected for
playback, Repeat
automatically.
for playback, if both
tapes; the
while the SLEEP
Sleep
display
but-
appears, the time interval before the unit will
by
10 minutes
(e.g., 80...70...).
cas-
2. To check the
remaining time until the power
sleep function is active,
press the Sleep button $ briefly. The time
remaining until turn-off is displayed for about 5
is turned off, while the
seconds.
Note: If you press the Sleep button $ while
sleep time is displayed, the SLEEP timer will
the
reduce the time until turn-off.
3. To cancel the
sleep timer, press the Sleep
$ repeatedly until "10" appears, and
press the SLEEP button once again while
is displayed.
button
then
"10"
tape in Deck B will play first.
5. If the unit is turned
on
shut off
at the
automatically
manually, it will
programmed
not
turn-
off time.
hour the alarm will turn the selected
or
£¢
sette
or
selected for the later timer.
Select the desired time interval before turn-off.
will flash when the
cassette decks have cassette
beginning
the Preset Down
6. Press the Set/Station button
Down
playing
4. When TAPE is selected
cg4.
7. Set the minutes
unit is
button
w
All Disc will be selected
REC. If you choose to make a
make sure that a blank cassette is
then the
ACTUAL TIME
turn off is reduced
is in the cassette deck, the Tuner function will
or
loaded in Deck B and rewound to its
out.
Alarm and Timer Notes
1. The Alarm indicator
no
c.
∞
x
if
2. When CD
If you have selected CD, or Tape A, "PLAY" and
"REC" will flash alternately in the display c.
either PLAY
(1 or 2) indicators
display w as will the REC indiapplicable. When the alarm is dis-
in the
shut the unit off.
4. If you wish to select a CD or Tape, press
the Set/Station button ∞ while CD or TAPE
window
press the button
alarm settings. Press
previously set,
no
memory, JBL Soundgear will default to the last
tuned station.
appears in the
was
¢
disarm that alarm.
can arm or
armed, the indicators will go
into
(d) Press the Set/Station button ∞
£
but-
to disarm the
light
cator
Preset stations have been
enter the selected
once
will
starting point.
(c) Press the Preset Down
you
Alarm 2
or
clockface and alarm number
beginning
was
Alarm 1
pro-
alarm, but retain any setin
When
the alarm is armed, the
tings memory.
?
Deck B. Make
pressed
£¢ twice to display the
?
that
source
2) will remain lit in the dis-
Each time the Alarm 1
select either
overlap,
at the earliest set turn-on
and the alarm will be set and armed.
To Cancel or
Check the Timer:
(a) If you want to select the Tuner, press
the Set/Station button ∞ while TUNER
c. "Play"
of the timers
on
play continuously until the later turnonly play the source that was
for the earlier timer, and will not play
in turn.
3.
appears in the display window
and "Rec" will flash in turn.
turn
off time. It will
the
to enter
play and/or record the
selected source for as long as it has been
grammed to play.
display
ON TIME
(AM 7:00)
the selected volume level. The clockface and the
grammed
--
OFF TIME
(AM 6:00)
selected
cg4.
buttons
Up
or
ON TIME
time and
setting.
ACTUAL TIME
ACTUAL TIME
system will
to
12. When you turn the power off ¡1, the unit
will automatically turn itself on at the pro-
was
TUNER, CD, TAPE
Alarm 2
Alarm 1
display c,
guide you through set-
minutes. "OFF" will flash in the
Your system offers a flexible dual alarm and
timer capability, which allows you to program
duration
∞
Recording
to enter the
cg4.
6. If both Alarm 1 and Alarm 2
times do not
is
the Preset
overlap
programmed to turn
will turn
on
on
and off
--
as
--
are
set, and their
that is, the earlier alarm
off before the later alarm
then both alarms will turn the unit
programmed.
17
TROUBLESHOOTING
If there is
no
sound from either of the
?
Check that the unit is
into
plugged
an
As
?
speakers:
active
preventive
a
to avoid
measure
If tape does not record:
?
Make sure record protection tabs have not
damaging
your speakers, make sure never to exceed the
maximum volume when playing your system.
been removed from cassette. If
electrical outlet.
?
Check that the unit is turned on, and that a
is selected and playing. If Tape or CD
source
selected, make
was
sure
that
cassette
a
or
disc
has been inserted.
Check that the Mute function has not been
selected and, if it has, turn it off using the
?
remote control.
?
?
the Volume Control G.
Check all wires and connections between the
main unit and the
the
?
If
all wires
speakers (see
page
an
batteries. Make
the external unit is turned
sure
selected,
to remote
con-
Make
?
sure
the batteries
not
are
weak, and
them if necessary.
Make sure the remote sensor in the front
on
and
or
powthat
sure
playing.
of the wires
are
Make
?
If
sure a source
in Deck B.
of the main unit is not blocked.
sure
the remote is
?
further than 23
no
make
dubbing,
rect decks
Make
the
--
is
playing.
the tapes are in the corin Deck A, and the blank
sure
source
you are not attempting to record
in
Deck A, as that deck is for playtape
sure
onto
a
(7 meters) away from the main unit, and
that it is aimed at the sensor head-on and not at
back
only.
too much of
If tapes sound distorted:
?
Make sure to use only normal bias tapes in
the unit.
feet
angle (no
line).
an
from the center
than 30
more
?
Turn off any fluorescent
the main unit.
light
in the
degrees
vicinity
of
?
If the tuner
correctly, and
frayed, cut or punc-
tured.
(radio) buzzes
or
does not
Make
sure
tape heads
clean and
are
demag-
play
properly:
Make
?
connected
are
?
?
Make
they have, you
holes with adhesive
protection
tape.
replace
panel
the
netized.
that all wires between the main unit
and external unit
none
punctured.
was
active electrical outlet
plugged
ered by fully charged
that
or
of
none
respond
that the external unit is either
sure
into
Make
9). Make
connected, and that
are
speaker wires are frayed, cut
an external (auxiliary) source
make
If the unit does not
trol commands:
?
Adjust
sure
cover
may
If
sure
that is in
use
you have tuned in to
in your area.
a
frequency
a
tape recording tapes
recorded earlier in the
over
same
material
session:
sure you have selected either One side
All sides, but not Endless loop, using the
Play Mode function h.
?
Check the antenna connection, and adjust
the placement of the antenna wires for best
?
Make
or
reception.
If there is
no
sound
coming
from
If
one
If RDS
speaker:
?
Check all wires and connections between the
main unit and the
sure
the
all wires
are
speakers (see page
connected and that
speaker wires
are
frayed,
cut
or
9). Make
none
of
punctured.
sure
the
all wires
are
page 9). Make
connected, and that none of
speakers (see
speaker wires
are
frayed,
cut
or
RDS is not available
punctured.
on
?
Make
sure
(or no) bass output:
garbled
signal.
When
until the unit
?
Boost.
?
Consider
adding
a
powered
subwoofer to your
system.
If there is low
(or no) treble output:
the
all wires
are
speaker wires
connected, and that
are
frayed,
cut
or
none
of
punctured.
yellow
For Model FFH-3030, make sure the
plug is connected to the correct
?
on the rear panel
Tweeter/Midrange jack
Consider experimenting with the Boost function fi by selecting Treble Boost or Super Boost.
46
?
18
as
ior is normal.
If Deck A does not auto-reverse:
Deck A is not
equipped with this feature,
always stop at the end of each side.
and
can
page
be
a
single preset
If CD does not
play:
?
Make
sure
drawer contains disc to
?
Make
sure
disc is not
?
Make
sure
play.
down in tray.
disc is of type CD or CD-R only.
upside
erased:
to delete
possible
(see
are
processes the
single Preset stachanged to a different
a
12).
If CD
skips
or
during play:
damaged.
is set securely
stutters
?
Make
sure
disc is not
?
Make
sure
main unit
on a
sta-
ble surface, free from vibrations.
When
attempting to
programmed
from
a
play
list
was
delete
CD
a single track
play list, the entire
erased:
It is not possible to delete a single track from a
play list, although the track can be replaced by a
different track (see page 14).
If the unit did not turn
If
?
sound is heard when tape is
Make sure tape is not blank.
no
on
at the pro-
grammed alarm time:
Check programmed time was AM or PM
selected correctly? Was 24-hour or 12-hour time
display selected as desired?
?
?
Check all wires and connections between the
main unit and the speakers (see page 9). Make
?
sure
station
fully
to delete
attempting
tion, although it
right speaker inputs 49 have the correct
polarity (+ and --).
Consider experimenting with the Boost function fi by selecting either PowerBass or Super
of the tape
For the first few seconds, the RDS data will
be
It is not
the connections to the left and
zero:
beginning
AM.
will
station, all presets
If there is low
tape rewinds past
rather than the counter number and this behav-
signal is weak, the audio
through without the RDS
come
a
The unit detects the
When the station's
?
?
Check all wires and connections between the
main unit and the
does not appear in the display:
?
Make sure you have selected the FM band,
signal may
signal.
If the system plays at low volumes but
shuts off as volume is increased:
?
(Radio Data System) information
--
Make
sure
the unit
was
not left turned
on.
playing:
If the unit did not turn
recording
on
and make
a
at the
programmed alarm time:
time was programmed correctly.
?
Make
sure
?
Make
sure a
blank tape
Deck B and rewound.
was
inserted in
SPECIFICATIONS
System
Output
Power
FFH-2020
FFH-3030
130 Watts total
180 Watts total
65W
+
Sound Pressure Level
107dB
Frequency Response
Signal-to-Noise Ratio (Aux Input)
Dimensions (W x H x D)
45Hz
Main Unit
65W
(1% THD, 50Hz
30W
+
60W
+
(bi-amplified)
30W
(1% THD, 200Hz 20kHz)
60W (1% THD, 50Hz 20kHz)
--
--
108dB
20kHz
40Hz
~
80dBA
20kHz
~
80dBA
327mm
x
343mm
219mm x 333mm
Speakers (each)
Net Weight
Main Unit
8.73kg (19.2 lb)
Speakers (each)
4.91kg (10.8 lb)
Shipping Weight
(system, accessories, packing) 21.5kg (47.3 lb)
273mm
x
248mm
Speaker System
Type
20kHz)
--
x
(10-3/4" x 12-7/8" x 13-1/2")
(8-5/8" x 13-1/8" x 9-3/4")
273mm
x
327mm
x
343mm
219mm
x
374mm
x
248mm
(10-3/4" x 12-7/8" x 13-1/2")
(8-5/8" x 14-3/4" x 9-3/4")
10.1kg (22.2 lb)
5.23kg (11.5 lb)
23.64kg (52 lb)
Ported 2-way
6-1/2"(165mm) PolyPlasTM with rubber surround
Tweeter
Ported 3-way bi-amplified
6-1/2"(165mm) PolyPlas with rubber surround
3" PolyPlas with rubber surround
N/A
13mm(1/2") Titanium-laminate dome with EOSTM waveguide 13mm(1/2") Titanium-laminate dome with EOSTM waveguide
Impendance
6Ω
6Ω
Max
Input power(MAIN)
130W
60W
Max
Input power(Super Woofer)
Woofer
Midrange
120W
CD
20Hz
Frequency Response
Signal-to-Noise Ratio
20kHz
~
20Hz
(+0,--2dB)
70dBA
20kHz
~
(+0,--2dB)
70dBA
Tuner
FM
Tuning Range
87.5MHz
Intermediate
10.7MHz
10.7MHz
61/58dBA
61/58dBA
30Hz
30Hz
Frequency
Signal-to-Noise Ratio
(Mono/Stereo, 98MHz)
Frequency Response
AM(MW)
or
Intermediate
Frequency
Frequency Response
87.5MHz
15kHz
~
522kHz
Tuning Range
108MHz
~
1,611kHz, 530kHz
530kHz 1,610kHz
~
1,720kHz
~
~
450kHz
50Hz
15kHz
~
522kHz
or
108MHz
~
1,611kHz, 530kHz
530kHz 1,610kHz
~
1,720kHz
~
~
450kHz
50Hz
2,500Hz
~
2,500Hz
~
SW(optional)
5.8MHz
Tuning Range
Intermediate
Frequency
450kHz
Frequency
450kHz
18MHz
5.8MHz
~
18MHz
~
450kHz
LW(optional)
153kHz
Tuning Range
Intermediate
281kHz
153kHz
~
281kHz
~
450kHz
Cassette Deck
FF, REW Time (C-60)
120
Frequency Response
Signal-to-Noise Ratio
Channel Separation
20Hz
NOTE: All features and
specifications
120
sec.
20kHz
~
sec.
20Hz
(±3dB)
43dBA
50dBA
50dBA
are
subject to change
20kHz
~
43dBA
(±3dB)
without notice.
19
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement