DVD/VCR COMBI RECEIVER Combi Receiver System OWNER'S MANUAL MODEL: LH-CX640 (Main Unit: LH-CX640W Speakers: LHS-CX640T, LHS-CX640C, LHS-CX640W) CD-R/RW PAL Before please up, operating or repairing this read this instruction booklet carefully and connecting product, completely. CAUTION Warning: To reduce the risk of electric shock, do of this not the remove product. There iceable cover or parts inside. Refer servicing qualified service Warning: To reduce the risk of fire shock, do product to or to personnel. electric rain, back are no user-serv- or not expose this dripping splashing water, not place objects or moisture. Do filled with water such as vases, on CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS ECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER. the product. SERIAL NUMBER: You can find the serial number on the back of the unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. ______________________________ ______________________________ Date of Purchase_________________________ Warning: This digital video disc player employs a laser system. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not open the enclosure. Visible laser radiation when open. Warning: Never stare laser beam. Warning: directly Caution: Do not install this confined space such similar unit. Notes on as a into the product book in a case or Copyrights: It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 2 GeneralFeatures.......................30 Contents Introduction...................4 SymbolUsedinthisManual...............4 AbouttheSymbolDisplay..............4 NotesonDiscs..........................4 HandlingDiscs........................4 StoringDiscs.........................4 CleaningDiscs........................4 TypesofPlayableDiscs...................5 Regionalcode..........................5 Disc-relatedterms.......................6 FrontPanel.............................7 DisplayWindow.........................8 MovingtoanotherTITLE................30 .30 Moving to another CHAPTER/TRACK . . . . . Search.............................30 .30 ChangingtheAudioChannel Still Picture and Frame-by-Frame Playback .31 SlowMotion.........................31 Random............................31 . . . . . . . . . . . . . RepeatA-B.........................31 Repeat.............................31 3DSurround.........................31 TimeSearch.........................31 Zoom..............................32 MarkerSearch.......................32 RemoteControl.........................9 RearPanel............................10 SpecialDVDFeatures...................32 .11 CameraAngle.......................32 .32 ChangingtheAudioLanguage InstallationandSetup . . . . . . . . . ConnectingtoaTV......................11 Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver .................12 RadioAerialConnections................12 SpeakerSystemConnection..............13 SpeakerPositioning.....................14 Mini Glossary for Audio Stream & Surroundmode.........................15 SoundMode...........................15 .16-20 BeforeOperation-VCRpart. .16 TuninginavideochannelonyourTV .16 Using your receiver for the very first time . . . . . . . . . . . . . . . . . . SettingtheclockManually................17 Tosetthecoloursystem.................17 Howtousethemainmenu..............18 .18 Tuning in TV stations Automatically .19 TuninginTVstationsManually .20 ChangingtheorderofTVstations. . . . . . . . . . . . . . . . . . . . . . . . . DeletingTVstations...................20 .21-25 BeforeOperation-DVDpart. On-ScreenDisplay......................21 InitialSettings.......................22-25 GeneralOperation....................22 . . . . . . . . . . . LANGUAGE.........................22 MenuLanguage....................22 DiscAudio/Subtitle/Menu. .22 DISPLAY...........................23 . . . . . . . . . TitleMenu..........................32 DiscMenu..........................32 . . . . . . . . . . Subtitles............................32 DVDAudioDiscs.........................33 .34 PlayinganAudioCDorMP3/WMADisc AudioCDandMP3/WMADiscFeatures .35 Pause..............................35 . . . . . . . . . . . MovingtoanotherTrack................35 RepeatTrack/All/Off...................35 Search.............................35 Random............................35 RepeatA-B.........................35 3DSurround.........................35 ProgrammedPlayback.....................36 .36 RepeatProgrammedTracks. .36 ErasingaTrackfromProgramList .36 Erasing the Complete Program List ViewingaJPEGDisc......................37 . . . . . . . . . . . . . . . . . . . . . . . . . SlideShow..........................37 StillPicture..........................37 MovingtoanotherFile.................37 Zoom..............................37 Torotatepicture......................37 To listen to MP3/WMA music watching picture .37 SpeakerSetup.........................38 .39 PlayingaDVDVRformatDisc. . . . . . . . . . . . . . MaintenanceandService.................39 . TVAspect.........................23 DisplayMode.......................23 ProgressiveScan...................23 AUDIO.............................23 PlayingaDivXMovieDisc................40 Additional Features-VCR part . . . . . . . . . .41-42 . OnScreenDisplay....................41 TapeCounterMemoryStop.............41 .41 VideoDoctor(Self-Diagnosis). Hi-FiStereoSoundSystem.............42 . . . . . . . . . . 5.1SpeakerSetup..................23 .23 DynamicRangeControl(DRC). AdditionalFeatures.....................43 Vocal.............................23 OTHERS...........................24 PBC.............................24 ScreenSaver........................43 . . . . . . . AutoPlay..........................24 DivX(R)VOD.......................24 LOCK(ParentalControl)................25 Rating............................25 .25 Password(SecurityCode). CountryCode......................25 . . . . . . . . . . . LastSceneMemory...................43 VideoModeSetting...................43 CopyingfromDVDtoVCR................44 .44 Recording from another video recorder RadioOperation........................45 .45 PresettingtheRadioStations ListeningtotheRadio..................45 . . Playingatape.......................26-30 .26 CM(CommercialMessage)Skip OPR (Optimum Picture Response) .26 .27 InstantTimerRecording(ITR). Timer recording using On Screen Display .28 .29 IfTimerrecordeventsOverlap .29 Change (Deleting) the Timer Programme PlayingaDVDorVideoCD. ............30-31 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ToCleartheStoredRadioStations . . . . . . . . . . .45 .46 .46 Mute...............................46 TuningintoaStationManually Tuning into a Station Automatically . Operation....................26 . . . . . . . . . . . . . . . . . . . . . . . . . Reference....................47 LanguageCodes.......................47 CountryCodes.........................47 Troubleshooting.....................48-49 Specification........................50-51 3 Introduction About the To proper use of this product, please read this owner's manual carefully and retain for future Symbol Display ensure reference. " " may appear on your TV and indicates that the function owner's manual is not This manual provides information on the operation display during operation explained in this available on that specific DVD video disc. and maintenance of your DVD player. Should the unit require service, contact an authorized service Notes on Discs location. Symbol Handling Used in this Manual The lightning flash symbol alerts you to the presence of dangerous voltage within the product enclosure that may constitute a risk Discs Do not touch the disc. Hold the disc do not by the playback side of the edges so that fingerprints the surface. Never stick paper or tape on get on the disc. of electric shock. The exclamation point alerts you to the presimportant operating and maintenance servicing instructions. ence / of Indicates hazards unit itself or likely to other material cause harm to the damage. Note: Indicates special notes and operating features. Tip: Indicates tips and hints for A section whose title has is applicable only symbol. making the task easier. Storing Discs playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. After Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out. of the following symbols represented by the one to the disc DVD-V DVD and finalized DVD±R/RW DVD-A DVD Audio discs VCD Video CDs CD Audio CDs MP3 strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static MP3 Discs spray intended for older WMA WMA Discs JPEG JPEG Discs Setting DivX Discs You must select one of your output VCR) to view on the TV screen. DivX Do not use the vinyl records. Output Source sources (DVD or If you want to view output source of DVD deck: Press DVD on the remote or DVD/VCR on the front panel ? until DVD indicator source on the front of DVD deck is viewed panel lights on the TV and output screen. If you want to view output source of VCR deck: Press VCR on the remote or DVD/VCR on the front panel ? until VCR indicator source 4 on the front of VCR deck is viewed panel lights on the TV and output screen. of Types Playable Discs Regional code This DVD player is designed and manufacplayback of region "5" encoded DVD software. This unit can play only DVD discs DVD tured for (8cm/12cmdisc) labeled "5" DVD audio discs (8cm/12cmdisc) Notes Video CD (VCD) (8cm/12cmdisc) ? on or "ALL". Regional Codes Most DVD discs have numbers in it clearly a globe visible on with the one or more cover. This number must match your DVD code or the disc cannot play. Audio CD (8cm/12cmdisc) ? In addition, this unit plays DivX file, DVD -R, DVD +R, -RW, DVD +RW, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files. 5 player's regional If you try to play a DVD with a different region code from your player, the message "Check Regional Code" appears on the TV screen. DVD Notes: ? Depending ment or on the conditions of the the CD-R/RW (or DVD recording equip- -R, DVD +R, DVD - RW, DVD +RW) disc itself, some CD-R/RW (or DVD -R, DVD +R, DVD -RW, DVD +RW) discs cannot be played on the unit. ? Do not attach any seal or label to either side labeled side or the recorded side) of a disc. ? Do not use shaped or (the irregularly shaped CDs (e.g., heartoctagonal) since they may result in malfunctions. Notes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally programmed by software manufacturers. This unit plays DVDs and Video CDs according to disc content manufacturer, therefore not be available or designed by the software playback features may some other functions may be added. Manufactured under license from Dolby Laboratories. Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. "Dolby", "Pro Manufactured under license from Digital Theater Inc. US Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 and other US and Systems, world-wide "DTS Digital Digital patents issued and pending. "DTS" and Digital Surround" Theater Theater registered trademarks of Copyright 1996, 2003 Inc. All rights reserved. are Systems, Systems, Inc. 5 Disc-related terms PBC: DVD±R/DVD±RW version 2.0 disc formats. PBC allows you to interact with the system via menus, search functions, or other DVD -R and DVD +R are Playback Control (Video CD only) Playback control is available for Video CD (VCD) two different standards for recordable DVD drives and discs. This format allows information to be recorded onto the DVD disc DVD +RW and DVD -RW once. re-writable media, meaning the DVD erased and re-recorded. 4.38 Gigabytes much. There only two standards for are Single-sided content discs can can be hold and double-sided discs hold twice are no dual layer single sided recordable (Video CD) with quality (DVD video discs only) generally a distinct section of a DVD disc. For example the main feature could be title 1, a documentary describing how the film was made could be title 2, and cast interviews could be title 3. Each title is stereo sound. MPEG assigned easily. a reference number an international standard for video and audio compression. MPEG-1 is used in encoding video for VCD and provides for multichannel surround sound coding such as PCM, Dolby Digital, DTS and MPEG audio. Chapter (DVD video discs only) chapter is a segment of a title such film or one interview in popular compression format used for digital files that yields very high near-CD quality. WMA developed by Microsoft type of coding / decoding Corp. audio discs Expert Group. file format that allows you to on the number of colors. JPEG is save a compressed images with no limit DivX name which is based on of a the revolutionary new using new video codec MPEG-4 standard for video.You will be able or only) accompanying feature you to locate it con- num- easily. (VCD) video CD with PBC (playback control) functions, pictures are divided into sections called "scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling you to locate the scene you want. A scene is composed of one or several tracks. a and still compression to play DivX this DVD/CD/VCR receiver. A distinct element of audiovisual information, such as the picture or sound track for a specific language (DVD), or a musical piece on a video or audio CD. Each track is assigned a track number, enabling you to locate the track you want. DVD discs allow track of video of audio. 6 a Track DivX is the movies enabling moving pictures Joint Pictures in is or Scene On JPEG chapter additional feature content, or music album.Each group is assigned a group reference tent ber Windows media audio file. A as a scene may not be recorded. The main audio content a series. Each a you to locate it assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters Group (DVD MP3 MP3 is enabling A MPEG is audio Title A title is A VCD holds up to 74 minutes (650 MB disc) or 80 minutes (700 MB disc) of MPEG-1 full-motion video along CDs. as discs. VCD typical computer-like operations. Moreover, still pictures of high resolution can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) operate in the same way as audio (with multiple angles) one and several tracks Front Panel Opens or OPEN/CLOSE (Z) closes the disc tray. EJECT(Z) Pause playback of tape a Press repeatedly Tray (DVD deck) a disc in the DVD or a or VCR deck remote control here. Insert tape in the VCR deck. PAUSE/STEP( X / C ) Remote Sensor Point the DVD/VCR Combi receiver Disc the Ejects for temporarily. frame-by-frame playback. STOP disc here. Stops playback of a disc PLAY To back play a recorded tape or (x) tape. (B) disc. or REC/ITR ( z ) normally or to Timer Recording. To record activate Instant Cassette TUNER FM/AM To change Compartment (VCR deck) between AM Insert and FM bands. Display video cassette here. a window DVD/VCR Select on (output select) of your output sources to view the TV screen between DVD and VCR. one PROG./PRESET (v/V) through memorized channels or to control tracking during playing back a tape (VCR mode). To tune in the desired station (Radio Mode). To scan up or down INPUT SELECT Select the VCR deck's VIDEO/AUDIO source A1 (Tuner, or A2) (Left/Right) Connect the audio/video output of an external system, TV/Monitor, Another VCR). source ( S/Q ) previous chapter/track. Reverse SKIP/SCAN DVD: Go to beginning of current chapter/track or to Press and hold for two seconds for VCR: Rewinds the tape during the STOP mode or a for fast fast reverse reverse picture search. search. Forward SKIP/SCAN DVD: Go to NEXT chapter/track. ( R/T ) Press and hold for two seconds for a fast forward search. VCR: Advances the tape during the STOP mode forward or picture for fast search. VOLUME Control STANDBY/ON Switches the DVD/VCR Combi receiver ON and OFF. Tu rn the knob clockwise to increase volume, counterclockwise to decrease the volume. 7 Display Window Indicates current A disc is loaded in the DVD deck. audio stream. loaded in the DVD (Lights when a disc is deck.) WMA disc inserted DVD/VCR Combi receiver is in VCR timer mode Indicates the unit is radio mode. or a VCR timer recording is recording programmed. DVD to VCR copy is in progress. DVD/VCR Combi receiver is Indicates current surround mode. Recording a tape. Indicates the unit is playing back a tape recorded in Hi-Fi. MUTE indicator Programmed playback active A cassette is loaded in the VCR deck. DIGITAL PCM WMA PHOTO dts VCD ST II PROG PROLOGIC RADIO CHP/TRK Hi-Fi DVD MP3 TV RPTALLAB Total Indicates current track number chapter, or channel number. Indicates the unit is TV mode. MP3 disc inserted. Repeat playback mode indicators. VCD disc inserted. DVD disc inserted. Lights up when a JPEG disc inserted. 8 stereo broadcast is being received in radio mode. playing time/Elapsed time/ Frequency/remaining time/ Current deck status/Surround mode/Volume etc. indicators. Remote Control OPEN/CLOSE, EJECT ( Z ) POWER Switches DVD/VCR Combi receiver ON and - OFF. - 0-9 numerical buttons Selects numbered options in a menu. EJECT OPEN/CLOSE POWER PROGRAM Accesses Program or removes Removes Select the output to view (CD/DVD source the TV on FM/AM VCR AUX Select the DVD/VCR Combi receiver's tuner on the as on the AUX For selecting the digital signal from DIGITAL AUDIO IN (OPTICAL) AV menu. preset stations from the tuner memory. AV DISPLAY, CLK/CNT Accesses On-Screen Selects - in the option menu. PROGRAM CLEAR SOUND MODE AUDIO Selects PR/TRK/PRESET SET UP/ i RETURN setup Records normally or - TUNING- activates Instant Timer BACKWARD TUNING+ or for fast (.) picture DISC MENU FORWARD DVD: Search VCR: Advances the or picture REC/ITR BACKWARD STOP PAUSE/STEP Selects STOP PAUSE/STEP PLAY MARKER SEARCH S-TITLE MUTE PLAY ANGLE REPEATA-B REPEAT TV/VCR CM SKIP SPEED TITLE ZOOM a DVD menu. subtitle language. silence the speaker of the DVD/VCR Combi receiver. TV/VCR Switch between your TV's tuner and the VCR's internal tuner. ZOOM Enlarges DVD video image. the disc's Title menu, if available. (G) angle a Displays RANDOM REPEAT A-B/SPEED/REPEAT playback. camera MARKER SEARCH TITLE - ANGLE Selects point during playback. Momentarily Pause Starts volume. MUTE (A) (X) (+/-) S-TITLE Stops playback. playback or recording temporarily/press repeatedly for frame-by-frame playback. DVD disc. menu on a VOLUME Displays FORWARD *Press and hold button for about two seconds. into SEARCH (>) search. Accesses Marks any tape in STOP mode for fast forward frequency MARKER PR/TRK/PRESET search. forward*/go to next chapter or track. radio stations a Adjusts speaker *Press and hold button for about two seconds. Enter the tuner. DISC MENU RETURN tape in STOP mode reverse menu. Displays functions on the TV screen. -Acknowledges menu selection. ENTER DVD: Search VCR: Rewinds the setup remove or an - OK MEMORY Recording. backward*/go to beginning current chapter or track or go to previous chapter or track. SET UP/ i Access or language (DVD) (CD). OK/MEMORY/ENTER menu. (z) audio an audio channel (b/B): REC/ITR BYPASS, LOGIC, PRO LOGICII (MOVIE, MUSIC, MATRIX) and 3D SURROUND. AUDIO To tune in the desired radio station. Removes the source AV2). PRO Select programme of VCR or Tuner Adjusts manually the tape's picture onscreen. TUNING or bands) Selects sound mode between PR/TRK/PRESET(v/V): - AV1 and AM SOUND MODE (left/right/up/down) an listening choice. (FM (Tuner, Switches among the clock, tape counter tape remaining modes on the display. - the Selects the VCR deck's display. and b/B/v/V Introducin FM/AM Tuner select button CD/DVD track number a or screen. program menu or a mark MARKER SEARCH Press to clear of CD/DVD/VCR select buttons VCR) menu. CLEAR Opens and closes the disc tray. Ejects the tape in the VCR deck. - if - available. Repeat chapter, track, title, Repeats sequence. Selects recording speed. all. CM SKIP Fa st forwards picture search seconds Play through 30 of recording. RANDOM tracks in random order. Note This remote control To use To use use the same buttons for VCR and DVD functions (ex. PLAY). the VCR, first press the VCR button. the DVD, first press the CD/DVD button. 9 Rear Panel AC Power Cord Plug into the power source. ANT.IN COMPONENT/PROGRESSIVE SCAN VIDEO OUT Connect to (Y TV with Y Pb Pr a Connect the aerial this using jack. Pb Pr) inputs. RF. OUT Connect to a TV with RF cable. DVD/VCR OUT VIDEO OUT/AUDIO OUT FM ANTENNA CONNECTOR (Left/Right) Connect the FM antenna to this Connect to a TV with video and audio terminal. inputs. 66 4 666 VCR IN LINE 1 (VIDEO IN/AUDIO IN Connect the audio/video external (Left/Right)) output of an (Audio system, TV/Monitor, another VCR). source S-VIDEO OUT Connect to a S-Video (DVD OUT) Input on TV. FOR DVD VIEWING ONLY. SPEAKER CONNECTORS Connect the six supplied speakers to these terminals. DIGITAL AUDIO IN (OPTICAL) AM ANTENNA CONNECTORS Connect the AM antenna to this terminal. Do not touch the inner Electrostatic discharge Remote Control of the pins may cause jacks Point the remote control at the remote Angle: remote the rear panel. sensor to the unit. Remote control Operation Range press the buttons. Distance: About 6m remote on permanent damage and battery Detach the installation battery of the remote (20ft) from the front of the AAA AAA R03 sensor cover on the control, and insert batteries with (size AAA) aligned correctly. rear two and About 30° in each direction of the front of the sensor Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 10 Installation and Tips Depending Setup your TV and other equipment you wish to connect, there are various ways you could connect the unit. Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. Caution Do not connect this unit's AUDIO OUT jack to the in jack (record deck) of your audio system. phono Make one of the following on the capabilities of your connections, depending Basic connection in jacks jacks on on the DVD the TV Connect the Left and using Player to the corresponthe Y Pb Pr cable. (C) AUDIO OUT Right jacks of left/right in cables. (A) this unit's DVD/VCR OUT to the audio jacks on the TV using the audio Notes: Connect the VIDEO jack jack s on this unit's DVD/VCR on the TV Right using the video AUDIO unit's DVD/VCR OUT to the audio the TV using the audio cables. Basic connection 1) InstaliodSeup Remove any disc from the unit and close the disc on the display window. tray. See that "NO DISC" is displayed Press STOP and hold it for five seconds before it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. releasing cable.(V) Connect the Left and Progressive to "On" on the setup menu for progressive signal, see page 23. Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive 2) (AV) OUT to the video in 1. 2. existing equipment. When using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, set TV's INPUT to COMPONENT VIDEO. When using the S-VIDEO OUT jack, set the TV' INPUT to S-VIDEO. on ding Scan to On in error, you must reset the unit. to a TV Connecting 2. Connect the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT Set the Make sure this unit is connected directly to the TV. Set the TV to the correct video input channel. 1. 1. on jacks of this left/right in jacks (A) Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack) or S-VIDEO connection. Note: If the TV has an S-video input, connect the DVD player with the S-video cable. When using an S-video cable, do not connect the yellow video cable. Rear of this unit (DVD exclusive out connection) (RF) Connect the antenna cable from your indoor/ outdoor antenna to ANT.IN jack on the rear panel of 66 4 this unit. 2. Connect the RF.OUT jack RF antenna cable from the supplied on the panel Input. (R) rear television's Antenna Component Video (Color (for DVD) 1. Stream ) connection in jacks on jacks the unit to the on the TV using Connect the Left and an jacks on the TV using S-Video connection corresponding (C) Right AUDIO OUT jacks of left/right in cables. (A) the audio this unit to the S-Video in S-Video cable. on the TV jack on using the COMPONENT/PROGRESSIVE VIDEO INPUT AUDIO INPUT SCAN VIDEO INPUT Pr Pb Y S-VI EO INPUT ANTENNA INPUT R Connect the Left and Right A V (S) 2. Rear of TV (for DVD) Connect the S-VIDEO OUT jack S Y Pb Pr cable. this unit's DVD/VCR OUT to the audio 1. C Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT 2. of this unit to your R AUDIO OUT jacks of left/right in cables. (A) this unit's DVD/VCR OUT to the audio jacks on the TV Progressive using Scan the audio (ColorStream Pro) If your television is connection high-definition "digital ready" television, you may take advantage of the DVD Player's progressive scan output for the highest video resolution possible. a or If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on Rear of this unit (Basic connection) the unit. 11 Accessory Audio/Video (A/V) Connections to DVD/VCR Combi receiver Connect the AV 2 jacks on the DVD/VCR Combi receiver to the audio/video out jacks on your accessory component, using the optional audio/video cables. If the auxiliary devices (e.g. DVD) are equipped input jack of the DVD/VCR Combi receive. Accessory with OPTICAL OUT jack, connect them to to the corresponding Device Jack Panel Front of this unit VIDEO OUTPUT AUDIO OUTPUT R L DVD Player (or Digital Device, etc) OR OPTICAL OUT 66 666 4 Radio Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. loop aerial to the AM aerial connector. ? Connect the AM ? Connect he FM wire aerial to the FM aerial connector. FM Wire aerial AM Loop aerial (supplied) (supplied) 66 4 666 Notes 12 ? To prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components. ? Be sure ? After fully extend the FM wire aerial. connecting the FM wire aerial, keep it to as horizontal as possible. Speaker System Connection Connect the speakers using To obtain the best possible the cords. supplied speaker surround sound, adjust the speaker parameters; distance, level, Front Speaker (Right) Centre Front Speaker (Left) Speaker 66 etc.. 4 InstaliodSeup 666 Rear Speaker (Right Surround) Rear Speaker (Left Surround) Subwoofer Notes ? Be sure to match the reversed, ? If you speaker cable to the appropriate terminal the on components: + to + and -- to --. If the cables are the sound will be distorted and will lack base. use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speak- ers. ? Do not remove the front cover of supplied speaker. About Ferrite Core Be to attach the ferrite sure (for connecting This ferrite to this core can 1 core speaker cables unit). a reduce noises. How to attach the ferrite 1. Push the to the stopper [a] core of the ferrite 2 core 2. Wind the Subwoofer cable three times to open. on A (A). ferrite Wind the Subwoofer cable core B the ferrite 66 core a once on 4 666 the (B). Make the as 3. Pass the others straight 4. Close the ferrite core on the ferrite core (B). until it clicks. 3 short length here possible. as A Notes ? Ta ke care ferrite not to pinch the speaker cables between the B cores. 13 Speaker Positioning In the of normal case position use the 6 speakers (2 front centre speakers, speaker, 2 speakers rear and subwoofer). If you want to a play the excellent bass sound, DTS digital surround ?F Dolby Digital surround, you should connect r ont speakers According to your listening position set up interval between speakers to 45 degree. ? or subwoofer. Centre speaker speakers The centre and front speakers the speakers the ideally are for distance. And equal same But height. by hearing position normally place it above set up the or below the television. ? Rear speakers Place left and right for surround sound behind the playback. tion and install them at towards ? a wall of In the case other, and set the a or ceiling or smaller rear listening For best area. These results, speakers above the level of the listener's to further room disperse speakers - ears. rear speakers atmosphere required listening posidirect the rear speakers too far behind the It is also effective to the sound. size, if the audience is above 60 recreate sound motion and do not install the 90 cm near to the rear than the listener's wall set the rear speakers opposite ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Rear Speaker (Right) Speaker (Left) Speaker Positioning Example 14 each Mini Glossary for Audio Stream 3D SURROUND This unit & Surround mode can produce conventional stereo mally required Allows you to enjoy 5.1(or 6) discrete channels of quality digital audio from DTS program sources Dolby Digital as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and exceptional clarity throughout a true 360 degree results in sound field. The term DTS is Technology, Technology, a using 3D Surround Sound playback from two five or more speakers nor- speakers instead of the to listen to multi-channel audio from This feature works with DVD discs encoded with high such 3D Surround effect, a which simulates multi-channel audio technology, a home theatre. Dolby Pro Logic and audio tracks. BYPASS Software with multichannel surround audio according to the way it was signals is played recorded. trademark of DTS Sound Mode LLC. Manufactured under license from DTS LLC. You The Dolby Digital surround format lets you enjoy up to 5.1 digital surround sound from a Dolby Digital promark, you can gram source. If you play DVDs with enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. channels of " " enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Press SOUND MODE repeatedly until display mode you want appears in the below. the sound window as Each time you press SOUND MODE button, the sound mode is changed in the following order; Use this mode when effect of being effect with DOLBY an in " or which LOGIC Dolby Digital mark. This mode movie theatre a intensity PRO movie playing " which carries the can or 2 channel provides the SURROUND. be obtained The through effect of the (II) Pro Logic sources. This is done output chan- using an advanced, high-purity matrix surround decoder that any spatial properties new sounds or PL2 MOVIE → PL2 MUSIC → → PL2 MATRIX BYPASS When DVD is inserted. You can change the stream of DVD (Dolby Digital, DTS, PCM, etc) by pressing the AUDIO button on the remote dur- ing playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. II creates five full-bandwidth nels from two-channel the → 3D SURROUND live concert house-an only front/back/left/right movement of the sound image, as well as the sense of fixed position in the sound image, is much clearer and more dynamic than before. Dolby PRO LOGIC → of the original recording extracts without Each time you press AUDIO button, the sound mode of DVD changed as the following order; is adding →→→ tonal colorations. MOVIE mode: The Movie mode is for use with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches the quality of discrete 5.1-channel sound. For your reference ? The DVD/VCR Combi receiver memorizes the ? You last mode MUSIC mode: settings for each source individually. identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. can - The Music mode is for with any stereo music recordings, and provides a wide and deep sound space. The Music mode includes controls that allow the sound to be tailored to individual use listening tastes. - MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement be used to enhance "larger." The mono - logic is turned off. It may signals by making them seem Matrix mode may also find use in auto sys- Note ? When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). tems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from logic decoder. The ultimate "cure" for poor FM stereo reception may be simply to force the audio to mono. a 15 Before in Tuning a Operation-VCR part video channel on your TV 6. (VCR) already picture is screen. is set at UHF channel 36. If channel 36 is used by another TV station, or if the 4 on the front of your VCR for The of this video recorder output frequency or than 4 seconds. RF36 will appear in the display window. following picture will be displayed on the TV Notes The Press PROG. 3 more change the transmitter channel of your VCR. Stages 5 8 will show you how to change the output frequency of your VCR. distorted, you can ~ Your TV receives signals from the video recorder RF like another TV station. You have to select (VCR) channel number 7. Make VCR You 2. on on 4 to select another video chan- can ence that you have correctly installed your described earlier in this book. Press POWER to turn Tu rn or also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a RCA lead. video channel built into sure as Press PROG. 3 nel. You may select any channel number between 22 and 68. . 1. 36 a your TV and tune it in so that you may watch video tapes. If you have used AUDIO and VIDEO cables then your TV should on already have a dedicated it, usually called AV CHANNEL P SET R 8. Select a TV channel number on which you wish to watch video's. your VCR. Press your TV. STANDBY/ON on when you have finished. Tune this channel so that Insert a pre-recorded video tape into your VCR and press PLAY on the remote control. Select a TV channel number on which you wish to appears. Store this channel on a the front of your VCR bright blue screen your TV. watch video's. Don't worry if you don't have a video-tape to stage! If you switch your VCR on and at this tinue stages 3 play con- 4, instead of seeing video play- ~ back tune your TV until you see a bright blue screen. 3. Tune this channel until the video picture is sharp Note Make and sure that you have correctly installed your VCR tuned in a dedicated video channel successfully on your TV. If you do not tune in a dedicated video channel on your TV you will be unable to view and record video tapes! and the sound is clear. If you have used a AUDIO and VIDEO cables you will not have to tune your TV, simply select the AV channel. The AV channel is optimum 4. video playback Store this channel on already pre-tuned for your TV. your TV. You will need to look at the TV instruction book if on you do not know how to do this. 5. 8 if you cannot carry out stages 5 obtain clear video playback as described in Only stages Using your VCR for time Following picture 4. Select ~ a TV channel number will To make 4 as tuning TV displayed). (see p.18). on ACMS Pr-12 ACMS 16 on the TV screen when stations, please follow stages shown "ACMS" which you wish to watch video's. Make sure that your VCR is in standby pressing POWER on the remote control (only the clock will be display you have just connected your video recorder for the very first time. ~ 1 the very first 3 to Setting the clock Manually The clock in your VCR controls time and date settings for your VCR. 1. To set the colour system 1. Press i. 2. The main 3. Press 1 or 2 to select the SYSTEM and press OK. Press 3 or 4 to select menu will appear on the TV screen. Press i. Press 1 or 2 to select TIME DATE. Press OK. 4. according to the COLOUR system used. HHMNDDMMYY :. - - -- -- -- --- . VCR TIME DATE REC Dr. E fOS ON OFF 2. Use the numbered buttons to alter the OPR the remote control on HOURS, MINUTES, DAY, MONTH and Press 1 or 2 to select the RF AUDIO. YEAR. Press 3 or 4 to select Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. used. The day of the week will appear 5. according to the RF AUDIO automatically when you enter the year. VCR REC E Dr. fOS ON OFF OPR HHMNDDMMYY 8 :. 00101 . THU 6. Press i to remove the menus from the TV screen. TIME DATE 3. If you make a mistake press 1 or 2 and enter the correct details. 4. Press i. 17 How to using the main Tuning menu This VCR menus The can easily be programmed by using displayed on screen. the controlled from the Remote Control menus are Handset. 1. 2. Automatically If the TV broadcast signal is weak your VCR may not detect the necessary information and will not be able to store them correctly. To overcome this problem please turn to the MANUAL TUNING section Switch on your TV set and video recorder the POWER button. ing in TV Stations by press- 1. 2. Press i button. The main Press POWER to turn will appear on the TV Press 1 screen. page 19. your VCR. on Press i button. The main menu on will appear on the TV 2 to select the ACMS. menu or screen. Press OK. VCR P SET R ON OFF Pr-12 ACMS Dr. 12 NIC fOSD P SET R REC OPR ON OFF REC VCR Pr-12 Dr. Pr-12 NIC fOSD OPR Timer recording setting (see p. 29). tuning setting (see p. 19). ACMS ACMS (Automatic Channel Memory System) (see p. 18). TIME DATE Date & clock setting (see p. 17). SYSTEM To set the Colour TV System (see p. 17). Dr. To c heck a problem with your VCR (see p. 42). F.OSD ON/OFF To display the operational - PR SET - Manual - - O O O ACMS - Pr-12 ACMS - 3. Press OK again to start the automatic mode of your VCR (see O OPR O NIC - - To improve the (see p. 26). To activate digital 42). playback picture p. (see p. can Press 1 and 2 to select the desired Press OK and press 3 4. Press "i" to return to a 00 PR-01 C03 00 PR-02 03 C04 00 PR-03 or TV S 4. The TV STATION TABLE will appear when is complete. Press i to save 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 P SET R 18 settings. your menu. 4 to select. picture. E ACMS change the menu language on the DVD setup menu. (See the Menu Language on page 22.) 3. C02 02 Pr-12 43). Tip You 01 deactivate the NICAM or sound tuning process. - PR-07 PR-08 MOVE : DELETE : , tuning Tuning in TV Stations 4. Manually will stop when it locates a station. Press 2 to select MFT. In certain areas of the country broadcast signals may be too weak for your DVD/VCR Combi receiver's automatic tuning process to find or assign TV stations correctly. You must tune in stations manually in order Searching Press 3 or 4 to adjust. these weaker broadcast for your DVD/VCR Combi PR CH 09 C10 MFT STATION receiver to store them. CHANNEL/CABLE 1. Press i. The main Press 1 : AV P R SET will appear on the TV 2 to select the PR SET. menu or screen. 5. Press 2 to select STATION so that you may name your TV station. Press OK. Press OK. PR CH 01 MFT STATION 00 PR-01 PR C09 VCR CH MFT C10 00 STATION Pr-12 REC ACMS CHANNEL/CABLE NIC fOSD ON OFF Dr. : AV P SET R OPR P SET R 2. Press i. Press 3 or The station table will appear. Press 3 or 4 to select the programme number the station that you want to tune characters. 6. (for example, PR new Press 1 09). or 4 to select letters and numbers for name. 2 to move back and forth between Press OK. 02 C03 00 PR-02 03 C04 00 PR-03 04 C05 00 PR-04 05 C06 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 P SET R MOVE : DELETE : PR-07 PR PR-08 C09 CH MFT C10 00 STATION , P SET R 3. Press OK. Press AV to select C (Standard stations) or 7. S (Cable stations): C02 - C69, S01 - Press i, confirm the station Press i again. Your S41. Enter the channel number of station that you want new TV station has If you wish to stages 1 7. now manually placement. been tuned into your VCR. tune other stations repeat - to tune with the numbered buttons to find the required or use 3 or 4 station. 10 11 12 13 14 PR 09 CH MFT STATION -- ---- 15 16 P SET R CHANNEL/CABLE : -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- ----- -- -- -- -- ----- ----- MOVE : DELETE : , AV P R SET 19 the order of TV Stations Changing tuning TV stations into your DVD/VCR Combi receivyou may wish to change the order in which they are stored without having to retune them against! The instruc- Deleting TV Stations After After er er tions on this page will show you how you them into your desired order. given ply move 1. Press i. sim- 1. Press i. The main The main Press 1 can tuning TV stations into your DVD/VCR Combi receivyou may wish to delete a station. The instructions given on this page will show you how easily delete any unwanted TV stations. will appear on the TV 2 to select the PR SET. menu or Press 1 screen. will appear on the TV 2 to select the PR SET. menu or screen. Press OK. Press OK. PR CH MFT STATION 00 PR-01 01 PR CH MFT STATION VCR 01 PR-01 00 Pr-12 REC ON OFF CHANNEL/CABLE NIC fOSD ON OFF Dr. ACMS : CHANNEL/CABLE : AV P SET R OPR AV P SET R OPR 2. 2. Dr. NIC fOSD VCR Pr-12 REC ACMS Press i. Press 3 Press i. Press 3 you want to Press 2. (for example, move 02 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 P R SET : : 4 to select the programme number 01 C02 00 02 C03 00 PR-01 PR-02 04 C05 00 PR-04 05 00 PR-05 06 C06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 02 C03 00 PR-02 03 C05 00 PR-03 04 C06 00 PR-04 05 C04 00 PR-05 06 C07 00 PR-06 07 C08 00 08 C09 00 P R SET 3. PR 03) PR-07 PR-08 MOVE : DELETE : , Press 1. After P SET R , (for example, 03). 03 PR-08 MOVE DELETE PR or you want to delete. 4 to select the programme number or a short while, the selected station will be deleted. 3. Press 3 4 to select the programme number move to (for example, PR 05). or you want to 01 C02 00 PR-01 02 C03 00 PR-02 04 05 C06 00 PR-04 00 PR-05 PR-06 01 C02 00 PR-01 06 C04 C07 00 02 C03 00 C08 00 C05 C06 00 PR-02 PR-04 07 03 08 C09 00 00 PR-05 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 00 PR-08 04 PR-07 PR-08 MOVE 05 DELETE P SET R 4. P R SET Press i to : remove the : , from the TV menus If you wish to delete other TV stations stages 1 3. screen. repeat - 4. Press OK. The selected programme will be moved to the new programme number. 01 C02 00 PR-01 02 C03 00 03 00 04 C05 C06 00 PR-02 PR-03 PR-04 06 C07 00 PR-06 07 C08 00 PR-07 08 C09 01 C02 00 02 C03 00 PR-02 04 C04 00 PR-04 05 C07 00 PR-05 06 C08 00 PR-06 07 C09 C10 00 00 PR-07 PR-08 08 MOVE: DELETE P SET R P R SET Press i to move remove : : How to , other TV stations the : , PR-08 00 MOVE DELETE selecting Stored TV stations If you wish to PR-01 menus repeat stages from the TV 1 - 4. screen. ways. Press 3 or Stored TV stations: can be selected in either of two 4 to select different stations that are tuned into your DVD/VCR Combi receiver. You may also directly select stations numbered buttons 20 on using the remote control. the Before Operation-DVD part On-Screen You use the Some items the Press DISPLAY 1. The selected item is Press b / B to 3. an inputting setting. You can appropriate (e.g. For number). some also functions, setting. b / Number provide 0:20:09 Display only AUDIO OFF ABC Display only all of the features Page (or Angle) b/Bor ANGLE or ? If no button is screen Playback pressed for 10 seconds, display disappears. the on- Status/Restrictions TITLE A-B Repeat title Repeat sequence Enter Marker 1/3 Example: On-Screen Display during playing VCD Items 1/9 a Selection Method Track Number MARKER SEARCH 123456789 Marker Search Resume Action play prohibited or (or menu from this PBC 1/3 Numbers 0:20:09 STEREO Sound Title Number 1/3 b / B, Numbers Number 1/12 0:20:09 Audio language Digital Audio Output mode Sound language Numbers, ENTER b/Bor and Angle B, Numbers b/B Example: On-Screen Display during playing divx movie disc Items Selection Method Track Number 1/3 b / B,Numbers ENTER Time search 0:20:09 Numbers, ENTER ENTER Time search Subtitle b / AUDIO 3D SUR ENTER Chapter ENTER b/Bor Audio Channel Selection Method B, Numbers ENTER Time search Example: On-Screen Display during playing DVD Video b / mode) point not available Items InstaliodSeup b/Bor mode language B, Numbers ENTER DVD Audio Output B, Numbers ENTER b / Time search Subtitle Notes: Some discs may not shown below. Selection Method Track Number the press ENTER to execute the ? Items highlighted. change the title Example: On-Screen Display during playing DVD Audio Group item. the number buttons if use menu. during playback. Press v / V to select 2. the TV general playback status on can be changed using the on-screen display: display can screen. To Display Audio language Digital Audio Output mode b/Bor 1 and MP3 AUDIO Subtitle ABC 1 ENG ABC ENG b/Bor S-TITLE b/Bor S-TITLE 1/3 language AUDIO Sound 3D SUR b/B b/Bor ANGLE 3D SUR b/B 21 Initial LANGUAGE Settings LANGUAGE By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see pages 22 to 25. To display display the menu. SETUP will take you back to initial Off Disc Menu Original 2. Use v / V to select the desired alternate Setup menu appears. then press to the second level. The screen shows move option the selected item, as well as a language for the Use v / V to select the desired 5. Press SETUP option Refers to the disc recorded. was Setup menu and DVD-V Setup menu. original language Other: To select another on-screen DVD-A according chapter. reference to the If you track in which the language, press number corresponding 4-digit language code list in the enter the wrong language code, buttons then ENTER to enter the press CLEAR. setting then press ENTER to confirm your selection. Some items require additional steps. PLAY to exit the Original: number then to the third level. 4. or Language Disc Audio / Subtitle / Menu Use v / V to select the second desired press B to Menu Select language you prefer for the audio (disc audio), subtitles, and the disc menu. Press SETUP. The setting for setting(s). Select Select the 1. move Move display. Operation the current 22 Disc Subtitle A second press of To go back to the previous level: Press b on the remote control. 3. Original screen. To go to the next level: Press B on the remote control. B to English Language Disc Audio and exit the Menu: Press SETUP to General Menu 5. DISPLAY Pressing scan DISPLAY TV 16 Aspect Display Mode Progressive Scan : ENTER will set this unit to Progressive mode. 9Wide Widescreen Caution: Off Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to an Move TV DVD-V Aspect 4:3 : Select when a Display Mode a setting ing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor. upper and AUDIO DVD-A works only when the TV Aspect Each DVD disc has bands on the audio on entire fit. Automatically displays the wide picture screen and cuts off the portions that do not Select Speaker Setup DRC On Vocal On Scan 5.1 To turn On Select progressive scan: out of this unit to the component input your monitor/television, set your television or of monitor Component Input. 1. Select use. 5.1 the Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. to system you AUDIO Panscan: Connect variety of audio output options. options according to the type of a Set this unit AUDIO Displays a wide picture with lower portions of the screen. Progressive InstaliodSeup 16:9 wide TV is connected. mode is set to "4:3". LetterBox: Press STOP and hold it for five seconds before releas- 2) standard 4:3 TV is connected. DVD-V Mode Select DVD-A 16:9 Wide: Select when Display On in error, you must reset the unit. 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window. "Progressive Scan" on the DISPLAY menu DVD-A Speaker Setup DVD-V speaker settings, including volume balance and distance, or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 38.) Dynamic Range Control (DRC) DVD-V DVD-A With the DVD format, you can hear a program's soundtrack in the most accurate and realistic DISPLAY Aspect Display Select DivX then press B. TV Move presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Mode Progressive Scan On Off This allows you to listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this Prev. 2. Select "On" using Move Enter the v / V buttons. effect. Vocal DVD-V Set to On 3. Press ENTER to confirm your selection. The confirm menu will appear. playing. only DVD-A when a multi-channel karaoke DVD is The karaoke channels on the disc mix into normal stereo sound. Note: If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the DVD Player. 4. When the confirm Cancel is to menu highlighted highlight Enter. as appears on your screen default. Use the b button 23 OTHERS The DivX(R) PBC, Auto Play and DivX(R) VOD settings can be changed. VOD DivX You can display the DivX DRM (Digital Rights Management) Registration code for your unit only. OTHERS PBC Auto On DivX(R) DivX(R) Off Play Your Select VOD Video On Demand registration To learn code is more : XXXXXXXX visit www.divx.com/vod PBC Set (Done) Select Move The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an VCD Playback Control (PBC) On: Video CDs with PBC to On or Off. encrypt are played according are played to the PBC. Off: Video CDs with PBC the same way as If you rent the DivX VOD file, it has several limits as shown below. You Display View set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. can If Auto Play then play the number which you can watch the file. DVD-V mode is set to back the title longest playback automatically. On: Auto Play function is active. Off: Auto Play function is not active. Play function may not work for DivX(R) VOD Rental This rental has 3 views left. Do you want to On, this DVD player will search for title that has the use one of your 3 views now? time and (Yes) (No) ? The rental has been expired. Notes: The Auto some DVDs. Rental Expired (Done) ? Display the authorization error. Authorization Error This player is not authorized to play this video. (Done) 24 options viewing ? Play file. Notes: Audio CDs. Auto move of LOCK Password (Parental Control) You LOCK Rating Unlock Password New NG Code Country can (Security Code) enter 1. Select Password on 2. Follow shown left step "New" is Input DVD-V Rating Some movies contain that may not be suitable of these discs contain scenes Many country. Some discs offer suitable more scenes as an If you control feature allows you to block below the rating you input, there scenes 1. 2. 3. your children from being able to view material you believe is unsuitable. "Rating" on the LOCK menu Press SETUP to Input the menu. Code display the can Setup clear it InstaliodSeup using menu. number "210499" and the 6-digit Enter a new code Country DVD-V Code were Rating, Password and Country Code input the 4-digit security code you created. If you have not yet entered a security code you are prompted to do so. access the must 4-digit code and press ENTER. Enter it and press ENTER to verify. If you make a a mistake before pressing ENTER, as security described above. press CLEAR. 1. DVD-A country/area used to rate the DVD video list in the reference features, you Input again forget your Security Enter the code of the then press B. 2. To then press ENTER. 4-digit code, verify. to by preventing 1. Select or code is cleared. parental to then press B. (Rating). "Change" If you forget your security code you the following steps: alternative. access new again 4. Press SETUP to exit the parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the The as menu Select DVD-A for children to view. it 2 the LOCK highlighted. 3. Enter the Move change password. or Select whose standards disc, based on the chapter. Code" "Country on the LOCK menu then press B. 2. Follow 3. Select the first character 4. step Shift the 2 as cursor shown left (Rating). using v / V buttons. using B button and select using v / V buttons. the second character 3. Select rating a from 1 to 8 using the v / V buttons. 5. Rating 1-8: tions and Rating one (1) rating eight (8) is has the most restric- Press ENTER to confirm your country code selection. the least restrictive. Unlock If you select and the disc unlock, parental control is plays not active in full. Notes: If you set the same scenes rating for the player, all disc scenes with rating or lower are played. Higher rated are not played unless an alternate scene is available same a on rating the disc. The alternative must have the lower or a one. found, playback stops. You word or change the rating If no suitable alternative is must enter the level in order to 4-digit passplay the disc. 4. Press ENTER to confirm your rating press SETUP to exit the menu. selection, then 25 Operation a You will be able to load and only eject video cassettes when your DVD/VCR Combi receiver is plugged into the mains. Your DVD/VCR Combi receiver may also playback recordings from Getting a better picture When NTSC tapes (on PAL TV). To playback started, the tracking function works to get the best possible picture automatically. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control or press PROG. 3 or 4 on the front panel to manually adjust the tracking until any distortions have been a cassette is inserted and automatic removed. Press numbered 0 switch automatic tracking on back the remote control to on again. sure that you have correctly connected your DVD/VCR Combi receiver as described earlier in this book. your TV. Press POWER to turn on your DVD/VCR Combi receiver. Insert the video cassette on into your DVD/VCR Combi receiver. The video casfacing up and sette should have the window side the arrow facing s witch off the slow motion and away from you. slow motion and During the on appear If distortions can them with D or be 6. Press STOP to end picture, reduce playback. tape is reached, your DVD/VCR stop playback automatically, rewind, stop, eject the tape. CM (Commercial Message) Skip: This feature enables you during playback of a tape to skip a commercial break in a few seconds, then resume While normal playback. tape is playing press CM SKIP skip commercial 2 Press 60 seconds on the remote another programme (or press CM SKIP to skip: 1 Press 30 seconds automatically. 3 Press 90 seconds AUTO TRACKING automatically adjust picture quality. 3. Press PAUSE/STEP to still the 4 Press 120 seconds tracking picture. repeatedly to advance Press PAUSE/STEP to 5 Press 150 seconds 6 Press 180 seconds a the OPR (Optimum Picture Response) automatically improves playback picture quality by adjusting your DVD/VCR Combi receiver to tape frame by frame. If you press FORWARD, the picture will be slowed This feature down at about 1/19 times the normal the condition of the for up to 5 minutes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape or your can be paused DVD/VCR Combi receiver. Still be in the Combi receiver will cassette will start playback. Tapes seen Press EJECT. material). Repeatedly the best to the status of E. playing your tape. If you load a video cassette which has had its record protection tab removed, playback of the give shuttle, the noise bars may picture according tape. control to 2. Press PLAY to start Your VCR will shuttle, press the desired function. If the end of the 1. Make Tu rn playback, Shuttle : During playing back or still picture press F or G. You can reach the following playback speeds. (-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) 5. Slow motion Tape Playing picture quality improved slightly by pressing 3 or 4. 4. Press PLAY to continue playing can tape. 1. Press i. 2. Press 1 or 2 to select OPR. 3. Press OK. your tape. Picture search: back press either FORWARD or BACKWARD and this will enable you to rapidly wind the tape (7 times normal playback) and see During playing where you Logic During are on fast 4. Press forwarding or OPR i OPR rewinding press and hold picture will be normal playback speed. or BACKWARD the back at 7 times 3 or 4 repeatedly to select: OFF, SOFT SHARP. Please note you may playing a only tape. 5. Press i return to 26 VCR Dr. C ON OFF tape. search: FORWARD played the 12 12 MS f screen. set OPR when or Instant Timer Your DVD/VCR Combi receiver allows you to make using a variety of simple methods: Instant Timer a set period Recording (ITR) of time or 5. Recording (ITR) start recordings recording immediately until the video cassette runs for out. 6. Your DVD/VCR Combi receiver incorporates Long Play (LP) which using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss 1. and sound quality when using LP. 7. recording unwanted If you press PAUSE/STEP during ITR, this DVD/VCR Combi receiver will enter the record on Press PAUSE/STEP to continue your DVD/VCR Combi Insert video cassette with a protection facing up and the arrow facing tab into will be control. If you wish to record directly from the AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN terminals repeatedly press AV until the socket you wish to record from is displayed. recording from AUDIO L/R (VCR IN AV1)/ (VCR IN AV1) terminals on the rear of your 8. EJECT will appear VIDEO IN terminals on the front of your unit. recording. on the TV screen for a few If you do not wish to record on a tape (this can happen quite easily by accident!) remove the protection tab on the back edge of the video cassette. possible to record on a video cassette protection tab removed by covering with self adhesive (L(MONO)/R)/ 5 Notes: It is from AUDIO IN tape is paused. After seconds. record recording a Press EJECT. VIDEO unit. when Press STOP to end AV 1 for AV 2 for displayed minutes your DVD/VCR Combi receiver will stop recording to prevent damaging the tape or your DVD/VCR Combi receiver. away from you. Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote recording. pause mode and ITR is cancelled. Tapes can be paused for up to 5 minutes; RECP your DVD/VCR Combi receiver. The video cassette should have the window side 4. Press PAUSE/STEP to avoid this book. Press POWER to turn 3. recording. scenes. sure receiver. 2. Press REC/ITR to start that you have correctly connected your DVD/VCR Combi receiver as described earlier in Make or press will increase the record time by 30 minutes until you reach a maximum of 9 hours. minutes picture Long Play Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. RECORD will appear on the TV screen. Press REC/ITR several times. Each successive enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 in Press SPEED if you wish to record in Standard with the the hole tape. Remember you can record one programme while watching another by starting your instant recording, press TV/VCR to appear TV indicator in the display window and then selecting a different channel on your TV. 27 recording using On Screen Display Timer You may set up to seven timer record events within of the current date. PR month one DATE TIME PR-01 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ SP -- SP -- SP -- SP -- SP -- SP -- SP -- SUMOTUWETHFRSA Note Before clock setting the timer make sure correctly and you know which stations 1. 2. that you have set the VCR stations you have tuned TV 6. or start and end times of the programme that you wish to record. Insert a video cassette with protection tab into your VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press i. Press 1 Press the numbered buttons to enter the record- ing your VCR. on Please note your VCR uses a 24 hour clock. e.g. 1pm will be displayed as 13:00. You may also select the the start and end times pressing 3 or 4 PR 2 to select REC. PR-01 Press OK. PR DATE -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ TIME 190020 :: :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ If all timer record events 7. SP -- Press 2 to select the SP -- Press the timer record event. DATE 3 or 4 or -- -- recording speed. to select the desired -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -~ PR PR-01 :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ DATE TIME 16 19002000 :: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- SP -- SP -- necessary, to ~ -- SP -- tape speed tape is left and speed from SP to LP, if complete recording the program. are :: SP -- LP). TIME -- SP -- switches full press 3 or 4 to select the event that you wish to remove and replace. Press 1 to delete the event. PR SP -- SP -- (SP, IP, setting SP -- , OPR Press OK to start SP -- IP mode determines how much 3. SP -- SP -- Dr. DELETE: SP ~ -- SP -- NIC fOSD ON OFF Pr-12 ACMS 16 -- SP -- VCR P R SET DATE -- TIME -- by . :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- SP SP SP SP SP SP SP -- SP -- SP -- SP -- 8. Check that the timer event details are correct. Press i twice. 4. Press the numbered buttons to enter the station If PLEASE CHECK is displayed, you have entered incorrect and will need to re-enter the data. that you wish to record. When selecting stations 1 Press POWER to switch your VCR Standby. will appear in the display window while your the channel - 9, press 0 first, then number; for example Stations You may also select Channels Once selected press 2. 3 by pressing - 3 03. or on press AV to select for correct PR 5. DATE the front of your display (AV1 or unit, AV2). TIME -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ :: -- -~ -- -- -- -- -- -- -- SP SP SP SP SP SP Press the numbered buttons to enter the date of one of the features. Press 1 entering the date you may following automated recording or 2 to select, then press OK confirm. DLY To record every day and Sunday) at the same time. SU 28 SA To record at the ~ same timer recording. To watch a recording standby mode, press DVD 9. Press STOP to end recording. Notes If at a later date you wish to delete or change any of the settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press 3 or 4 to select the event that you wish to delete or change. SP the programme. If you press OK before select during POWER and DVD to switch to DVD mode. If you wish to record from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/ VIDEO IN from the back VCR waits to make the or 4. to (except Saturday time every week. Press 1 to delete the event...or Press OK to change; then press 1 or 2 to select; Station, Date, Start and End times and LP. Press 3 or 4 to enter the correct information. If Timer record events Overlap... Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will always be given priority. Example: Programme 1 is programmed to start at 16:00 and end at 17:00. Programme 2 is programmed to start at 16:30 and end at 17:30. (In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2 will be recorded.) If Timer record events Overlap... Change (Deleting) Do not overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later recording times as shown in the diagram. a later date you wish to delete or change any of settings in timer event memory you may do so without having to enter all the timer event information again. Simply display the timer event screen. Press D the Example: Programme change. or 1 will be recorded in its Programme entirety, but only 2 will be recorded. Programme If at tions of the the last 30 minutes of the Timer E to select the event that you wish to delete Press F to delete the event...or Press OK to change, then press F or G to or select; Station, Date, Start and End times and LP. Press D or E to enter the correct information. PROGRAMME 1 17:00 16:00 17:30 16:30 PROGRAMME 2 (This portion If two programmed will not be timer recorded.) recordings overlap at midnight 00:00 a.m., programme 2 will not be recorded. 29 Playing DVD a or General Features Video CD Note: Playback Setup Turn 1. on Unless stated the TV and select the video connected to the DVD Turn 2. the on the audio input source input source player. system (if applicable) and select connected to the DVD player. Press OPEN/CLOSE to open the disc tray and load your chosen disc in the tray, with the playback side down. 3. Press OPEN/CLOSE to close the 4. starts If automatically. playback tray. Playback does not start, press PLAY. In some cases, the disc menu might Moving to another TITLE When Use the bBvVbuttons to select the title/chapter you want to view, then press ENTER to start. Press TITLE or DISC MENU to return to the menu screen. use disc has a more than one title, you to can move another title. Press DISPLAY while stopped then the b / B to move You playback is appropriate number (0-9) or use to another title. play any title by inputting playback is stopped. can appear instead: otherwise, all operations described the remote control. Some features may also be available on the Setup menu. its number while Moving to another CHAPTER/TRACK When title a disc has er on a more disc has than chapter/track as one more than track, you one chapter can move or a to anoth- follows: or > briefly during playback to select chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. ?T o go directly to any chapter during DVD playback, ? Press . the next Use the 1 2 4 3 buttons to select an option you want, then press ENTER to view the option. ? press DISPLAY and press v / V to select the icon. Then, input the chapter/track Use the number buttons to select the track you want to view and press RETURN to return to the menu screen. Menu settings and operating procedures may differ. Follow the instructions on the each menu screen. You also may set PBC to Off (See "PBC" on page 24). chapter/track numberoruseb/B. Search 1. Notes: ? parental control is set and the disc is not within rating settings you must input the password. (See "Lock Menu" on page 25.) The If the 2. player. (five). your o watch or > for about two seconds a The region code for this DVD during timer player is 5 recording standby mode, press POWER and DVD to switch to DVD player will now go into SEARCH mode. Press and hold . . repeatedly to select required speed: mX2, mX4, mX16, mX100 (backward) or MX2, MX4, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). or > the ?D VDs may have a region code. Your player does not play discs that have a region code different from ?T Press and hold . during playback. 3. To exit SEARCH mode, press PLAY. mode. Changing the Audio Channel Press AUDIO repeatedly during playback to hear (Stereo, Left, or Right). ferent audio channel 30 a dif- Still Picture and Frame-by-Frame Playback Repeat You Press PAUSE/STEP 1. the remote control during playback. Advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly. To exit still motion 2. on Press PAUSE/STEP The DVD player Press . 2. The T during player or 1/16, t 1/8, t 1/4 1/16, T 1/8, T 1/4 or t 1/2 or T 1/2 mode, press PLAY. playback in reverse is not with possible Video CDs and DivX Discs. Random Press RANDOM The unit during playback or in stop mode. automatically begins random playback and RANDOM appears Press RANDOM 2. again Title: repeats the current title. ? Off does not on the TV screen. Track ? All ? Off or > during Random playback, (track) and resumes ? ? a setup menu to use You must set PBC to Off the random function (See "PBC" on Off To produce 1. Press A-B at your chosen starting appears briefly on the TV screen. 3. 2. again at your chosen "A B" appears briefly on the TV repeat sequence begins. Press A-B a again to cancel. Chapter (Track) play- 3D surround effect that simulates multi- Press DISPLAY Use 3 or 4 to select the sound option will be option. highlighted. Use1or2totoselect"3DSUR". effect, select "Normal". Time Search playing at any chosen time Press DISPLAY box shows the point. end during playback. To turn off the 3D Surround sequence. Press A-B play repeatedly. speakers (instead of speakers normally required for multi-channel from a home theater system). To start repeat 2. 1. 1. a does not : page A-B To Repeat Track/Group/Off 3D Surround the on 24). Repeat - repeats the current track. Group: repeats the current Group. The sound PBC, play repeatedly. If you press > once during Repeat back, the repeat playback cancels. 3. Video CD with does not : ?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe setup menu to use the repeat function (See "PBC" on page 24). playback. Note: On : the five+ to normal. the unit selects another title Random Repeat Track/All/Off repeats the current track repeats all the tracks on a disc. : Track: audio . - play repeatedly. channel audio from two stereo Tip: By pressing : ? ? ? 1. ? Notes: Note: Slow motion the current DVD Audio Discs required speed: (backward), or (forward). Repeat Chapter/Title/Off chapter. Chapter: repeats pause. > to select the To exit Slow Motion 3. go into PAUSE mode. will enter SLOW mode. Use the . t > or now - ? Video CDs (X) during playback. will title/chapter/all/track on a disc. during playback to select a desired DVD Video Discs Slow Motion 1. a repeat mode. press PLAY. mode, play can Press REPEAT " A * " 2. on the disc: The time search during playback. elapsed playing time. Press v / V to select the time clock icon and "-:--:--" appears. point. screen 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. and the 4. Press ENTER to confirm. Playback starts from the selected time. 31 Zoom Use 1. zoom to enlarge Press ZOOM the video image. during playback or still playback to activate the Zoom function. The square frame appears briefly in the right bottom of the picture. 2. 1600% size → screen fit mode → can Checking the contents of DVD discs: Menus DVDs may offer menus that allow you to access special features. To use the disc menu, press DISC the corresponding highlight your number or use the b selection. Then press ENTER. Title Menu change the way the image appears on the you're playing a DVD movie. Press Press TITLE. If the current title has 1. when screen Input B v V buttons to 100% size Screen fit mode: You DVD Features MENU. Each press of the ZOOM button changes the TV screen in the sequence: 100% size → 400% size → Special 3/4 to select between Normal, Enhanced, and on the menu appears menu may appear. menu, the a Otherwise, the disc screen. Maximum. 3. Use the bBvVbuttons to zoomed 4. To move through normal or press ZOOM playback, disc, VR disc and movie file. Marker Search To enter Marker a desired point on the disc. The Marker icon appears to enter up to nine on briefly. Repeat screen To Recall or 1. During disc search menu Within 10 Clear a Marked Scene again menu is displayed. to exit. Angle recorded at different scenes angles, you can change to a different camera angle during playback. Press ANGLE repeatedly during playback to select a desired angle. Note that the number of the current angle appears on the display. Changing press SEARCH. The marker appears on the screen. seconds, press Press ENTER and marked b / B to select scene. playback or a marker clear. starts from the Or, press CLEAR and the marker number is erased from the list. 4. and the Audio Language playback, number that you want to recall 3. Press DISC MENU If the disc contains markers. 2. angles, as camera options, camera playback from up to nine memorized To enter a marker, press MARKER at the the TV Press DISC MENU and the disc Camera start can points. subtitle Disc Menu Zoom may not work on some DVDs. Screen fit mode is available for playing the DVD You offers features such Press TITLE to exit. 3. CLEAR button. Notes: ? menu spoken language and chapters for the title. picture. resume repeatedly ? The 2. the repeatedly during playback language or audio track. to hear a With DVD-RW discs recorded in VR mode that have both main and a Bilingual audio channel, you can (L), Bilingual (R), or a mix of Bilingual) by pressing AUDIO. a switch between Main both (Main + You on can play any marker by inputting its number the marker search menu. Press AUDIO different audio Subtitles Press S-TITLE repeatedly during playback languages. to see the different subtitle Note: ? The subtitle file of the DivX file is smi, ? If there is no information not read in the DivX 32 displayed only srt and sub. file, or " 1 there is " or etc. a code that are can displayed. DVD Audio Discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio a new disc format provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can (compared A can music, either Advanced Resolution multi- channel sound quality that is closer to the artist's recording or for longer recordings. Many DVD Audio discs contain on-screen text, such biographies, playlists, or lyrics. Some contain photo galleries or video clips. as groups. Your player enables you to quickly access different groups during playback via the on-screen dis- play. 1. Press DISPLAY 2. Press Press 1/2 3. mas- maximum sound Audio, you must quality use DVD Audio discs Combi icon. Group the numbered buttons (0-9) to select can only be accessed by entering a con- pass- cover or on a isn't dictated a web site). This password control your DVD/VCR Combi receiver function of the disc. by --- it is Since the authoring of DVD Audio Discs varies, some display choices might not be availthe disc you're playing. Operation on-screen and surround effect 5.1 channel output (5.1CH AUDIO OUT jacks stop mode. word. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's able for enjoy or in Sometimes the author of the disc creates hidden tent that jacket artist Note: of DVD to select on group number. of the To 3/4 during playback Note: DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is ter Some DVD Audio discs divide content into different a be delivered with up to 24 bits of data to 16 bits for a standard CD). typical used for to another GROUP Moving on analog audio the DVD/VCR receiver). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. Viewing another PAGE Since DVD Audio discs can hold a lot of content, there on the disc. are various ways to see what's available 1. Press DISPLAY during playback. 2. Press 3/4 to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the of the authoring of DVD Audio Discs varies, some display choices might not be availthe disc you're playing. on-screen able for 33 Playing an Audio CD or MP3/WMA Disc MP3 / WMA disc limited ? player can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. ? with this player is Sampling frequency: within 8 48 kHz (MP3), 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32 192kbps (WMA) The player cannot read an MP3/WMA file that has a file extension other than ".mp3" / ".wma". CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which - within 32 The DVD compatibility follows: as - - - ? Audio CD Once you insert an audio CD a menu appears on the screen. Press v / V to select a track then press TV PLAY ENTER and or ? ? starts. playback AUDIO CD 0:52:07 1/12 List Program creates Track1 Track2 Track3 ? Track4 File an names and must Track5 Track6 ? Track7 Clear All Track8 PROGRAM They ISO 9660 file should have incorporate system. a an should not contain maximum of 8 letters .mp3 or .wma extension. special letters such as / ?*:"<>letc. Edit ? The total number of files on the disc should be less than 650. MP3 / WMA 1. Press v / V to select to 2. folder, and press ENTER a the folder contents. see Press v / V to select ENTER. track then press PLAY a or starts. Playback This DVD player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MUSIC 1/12 0:00:00 these List require certain pre-existing conditions (see above) to ensure compatible playback. Program 1-Music1 2-Music2 Customers should note that 3-Music3 4-Music4 required 5-Music5 6-Music6 DISPLAY PROGRAM Info Edit should Tip: ? owner. If you are in a file list return to the Folder the MUSIC on list, menu the v / V to use and want to highlight and press ENTER. ? Press DISC MENU to ? On on When top of the playing titles, you 34 to the next page. a CD with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word ? move a menu file can see is highlighted. containing information such the information is and music from the Internet. Our company has no right to grant such permission. Permission Clear All 7-Music7 permission in order to download MP3 / WMA files by pressing as track DISPLAY. always be sought from the copyright Audio CD and MP3 / WMA Disc Random Features 1. Pause screen. Press PAUSE/STEP 1. press 2. during playback. To return to 2. Press RANDOM during playback or when playback is stopped. Random Playback begins immediately and RANDOM appears on the menu playback, press PLAY, PAUSE/STEP again. ENTER To return to normal repeatedly or playback, press RANDOM disappears from the until RANDOM menu screen. Tip: Moving > or the next track briefly during playback to go to beginning of the to return to the or current track. Press . twice 2. previous In 3. case briefly to step back to the Repeat during of audio CD, directly to any track, using the numbered but- to go random resumes playback, the playback. unit selects random A-B 1. To 2. Press A-B track. enter the track number tons > another track and Press . 1. By pressing to another Track repeat a sequence during disc playback press A-B at your chosen starting point. The Repeat icon and "A" appear on the menu screen. again at your chosen end point. The icon and "A-B" appear on the menu screen, and the sequence begins to play Repeat (0-9). repeatedly. Repeat Track/All/Off You 1. can play a 3. track/all on a Press REPEAT when disc. playing a disc. The To exit the sequence and return to normal play, press A-B again. The Repeat icon disappears from the repeat menu screen. icon appears. 2. Press REPEAT to select ? ? ? a desired repeat mode. To Track: repeats the current track All: repeats all the tracks on a disc. does not Off(No display): repeat playback once produce a 3D surround effect that simulates multi-channel audio from two stereo speakers (instead speakers normally required for multi-channel audio from a home theater system). of the five+ play repeatedly. Note: If you press > 3D Surround during Repeat Track playback, the 1. cancels. 2. Press AUDIO on To return to normal playback, press AUDIO disappears from repeatedly Search 1. during playback. "3D SUR." appears the until "3D SUR." menu screen. the menu screen. Press and hold . or > for about two seconds during playback. The 2. player will now go into SEARCH mode. Press and hold . or > repeatedly to select the required speed: mX2, mX4, mX8 (backward) or MX2, MX4, MX8 (forward). Search speed and direction are indicated on the menu screen. 3. To exit SEARCH mode, press PLAY. 35 Repeat Programmed Tracks Programmed Playback 1. The program function enables you to store your favorite tracks from any disc in the player memory. A can program 1. Insert a disc. or AUDIO CD 2. 2. contain 30 tracks. Audio CD MUSIC or menu disc. The repeat ? Off(No display): a desired repeat mode. repeats the current track repeats all the tracks on programmed list. Erasing then the again, Program to exit the mark will E 1. Edit mode. 2. 0:00:00 does not play repeatedly. during Repeat Track playback, Track from Video CD : List Press PROGRAM in the Program Press B to Program the stop mode to Edit mode. move to the "Program" list. E Program Track1 Track5 Track2 Track7 1-Music1 4-Music4 Track3 Track4 2-Music2 6-Music6 Track4 Track1 3-Music3 1-Music1 3. 2-Music2 Track5 once 1/12 List E Program a enter MUSIC 1/12 List Use v/V to select the track that you wish to "Program" list. erase from the 4-Music4 Track6 5-Music5 Track7 4. 6-Music6 Clear All Track8 Clear All 7-Music7 DISPLAY Audio CD Menu PROGRAM Edit Info MP3/WMA Menu Video CD: Press PROGRAM while stopped. The program PROGRAM to exit the playback 1. is menu. 2. Note: On a setup Video CD with "PBC" on menu to PBC, you use the must set PBC to Off VIDEO CD List E Program Track1 Track5 Track2 Track2 Track3 Track3 Track4 Track1 Track5 Clear All Video CD Menu Select a track on the "List", then press ENTER to place the selected track on the "Program" list. Repeat to place additional tracks on the list. Press B. Select the track you want to start "Program" list. Press PLAY or ENTER to start. playing on the Playback begins the order in which you programmed the tracks. Playback stops after all of the tracks on the "Program" To resume playback, list have played normal playback select a once. from track of CD and then press PLAY. to erase additional tracks Follow Complete Program steps as Use 3/4 1-2 of "Erasing a List Track from Program above. to select "Clear complete Program All", then press ENTER. for the disc will be erased. on programmed playback (See 24). page the List" The the Repeat the list. Erasing appears. Press menu Press CLEAR. on PROGRAM Edit 36 All: repeat playback cancels. AUDIO CD 6. Track: ? If you press > E Press PROGRAM 5. ? The 0:52:07 a Note: appears. Note: 4. Press REPEAT to select Press PROGRAM. disappear playing MP3/WMA Discs: mark will appear to the right of the word "Program" on the right side of the menu screen. 3. Press REPEAT when icon appears. programmed (or MP3/WMA) list in Note: The programs removed. are also cleared when the disc is Viewing Using JPEG Disc a this DVD Player you Moving view discs with JPEG can 1. Press . > or Insert disc and close the a the TV on appears tray. The PHOTO menu during viewing a picture to the previous file. once advance to the next file files. JPEG to another File to or JPEG Zoom screen. Use (see PHOTO List the to enlarge page) zoom 32 photo image. Preview To rotate JPEG Folder 1 JPEG Folder 2 picture >>> JPEG Folder 3 Press v / V JPEG Folder 4 during showing JPEG Folder 5 picture JPEG Folder 6 JPEG Folder 7 clockwise or a to rotate the picture counter clockwise. JPEG Folder 8 To listen to MP3/WMA music watching picture JPEG 2. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, the v / V buttons use the remote to move PLAY. or Viewing the file proceeding starts. While viewing a file, you can press STOP to the previous menu (PHOTO menu). Slide Show 1. to files while on listening the same containing to MP3/WMA disc. the two types of file in player. 2. Press TITLE to 3. Press v / V to select 4. Use B / V to select move Playback STOP is display starts. The PHOTO photo a menu. Operation file. icon then press ENTER. will continue until playback pressed. to the next page. Tip: JPEG Use vVbBto display Insert the disc the If you want to view a particular file, press v / V to highlight a file and press ENTER Press DISC MENU to can music files recorded and press ENTER. highlight 3. on You To listen to highlight the (Slide Show) then press ENTER. only the desired music watching picture, programmed the desired tracks from the "MUSIC" menu and then proceed as above. Tip: ? There are (Normal) ? > Speed options (Slow). : >>> (Fast), >> On a disc with MP3/WMA and JPEG you can switch MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO word ? three Slide and on Press top of the menu is JPEG disc limited ? compatibility with this player is follows: as Depending upon the size and number of JPEG a long time for the DVD player files, it could take highlighted. to read the disc's contents. If you don't screen RETURN, information of file is hidden. display after several minutes, see an on- some of the files may be too large reduce the resolution of the JPEG files to less than 2M pixels as 2760 x --- Still Picture 1. 2048 Press PAUSE/STEP The 2. JPEG player will now slide show. ? go into PAUSE mode. To return to the slide PAUSE/STEP during again. show, press PLAY or pixels and burn another disc. The total number of files and folders on the disc should be less than 650. press ? ? Some discs may be incompatible due to a different recording format or the condition of disc. Ensure that all the selected files have the extensions when ? If the files have rename ? File them names are Windows into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without able to be read the files copying by shown ".jpg" extension will not be this DVD as JPEG player. Even though image files in Explorer. 37 5.1 Speaker Setup This to chapter includes important reference information help you set your DVD/VCR Combi receiver. If you connected following settings for the built-in 5.1 channel how far the sound has to travel to reach your set lisThis allows the sound from each speaker Press b / B to 1. Press SETUP. The 2. Use v / V to select the AUDIO 3. move setup menu speaker. [0.3(1)m(ft) appears. option Use v / V to select the move then to the third level. "Select" is Speaker Setup menu → AUDIO Size Vo lume Distance Test Front L Small dB 0 m(ft) 0.6(2) Off Select 5. Move Return Use b / B to select the desired Enter speaker. v / V / b / B buttons. 6. Adjust options using 7. Press RETURN to return to the Speaker menu screen. selection Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer) Note: Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the change speaker settings settings. are fixed, you cannot the Volume Press b / B to speaker. (-6dB 38 Press b / B to test the Front Left appears. Speaker adjust the output 6dB) ~ 6.0(20)m(ft)] level of the selected signals of each the volume to match the volume of test rized in the Press ENTER and 5.1 time. Test Speaker Setup option highlighted. 4. - adjust same the Distance of the selected then press to the second level. press B to to your DVD/VCR Combi tening point. to reach the listener at the surround decoder. B to speakers receiver, setting the Distance lets the speakers know Speaker Setup Make the Distance speaker. Adjust signals memo- system. (L) Rear Left → (R) Center → Front Right (R) SubWoofer. Right (L) → Rear → DVD VR format Disc Playing a This unit will play DVD-R/RW discs recorded Maintenance and Service using using the DVD-Video format that have been finalized a ? This unit will Insert a menu play DVD-RW discs recorded using Recording (VR) format. disc and close the appears on the TV When shipping save Do not ENTER and playback Press TITLE to move track then press PLAY or starts. to the list menu. played in this play- volatile liquids such as insecticide the unit. or plastic products in contact long period of time. since they with the unit for a leave marks the surface. on the unit surfaces Some DVD-VR disc RECORDER. are Player made with CPRM data does not by DVD support these kinds of discs. a copy protection system (with scramble system) the recording of 'copy once' broadcast only allowing programs. CPRM stands for Content Protection for Recordable Media. play is CPRM compatible, which means that you be made on DVD-RW discs formatted in VR mode, and CPRM recordings players that are strong solvents such as these as might damage alcohol, benzine, the surface of the only be played on specifically compatible with CPRM. can Maintaining the Unit The DVD can record copy-once broadcast programs, but you cannot then make a copy of those recordings. CPRM recordings only use thinner, unit. What is 'CPRM'? CPRM is Do not or player, use a soft, dry cloth. If the extremely dirty, use a soft cloth lightly with a mild detergent solution. are moistened er. can packing To clean the Unfinalized DVD-R/RW discs cannot be This use near Cleaning Note: ? carton and Do not leave rubber ? a original shipping the exterior surfaces clean spray Press v / V to select the the unit factory. Keeping ? ? before materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the 3. chapter service technician. the Unit Handling Please tray. The DVD-VR screen. DVD-VR 2. a DVD-recorder. the Video 1. Refer to the information in this contacting player is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of For details, please use. contact your nearest authorized service center. 39 Playing this DVD Using Insert 1. a a appears DivX Movie Disc Player you can disc and close the on the TV play DivX disc follows: ?A v ailable DivX disc. tray. The MOVIE menu 720x576 screen. ? MOVIE The file with this compatibility as player is limited resolution size of the DivX file is under (W x name H) pixel. of the DivX subtitle is available by 56 characters. 0:00:00 List Movie Folder 1 ? Movie Folder 2 Movie Folder 3 If there is impossible code to express in the DivX as mark on the " file, it may be displayed Movie Folder 4 " _ Movie Folder 5 display. Movie Folder 6 Movie Folder 7 Movie Folder 8 ? If the number of the Press v / V to select 2. a v / V buttons on the remote to file is not ? If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. Tip: Press DISC MENU to ? On a CD with switch move highlighted. or audio is * GMC? encoders, like DivX There are called 1-point, 2-point, or Xvid, have this option. different levels of GMC or 3-point encoding, usually GMC. to the next page. MP3/WMA, JPEG and MOVIE file, you can MUSIC, PHOTO and MOVIE menu. Press TITLE and MUSIC, PHOTO and MOVIE word on top of the menu is interleaved, either video If the file is recorded with GMC, the unit supports only 1-point of the record level. MPEG4 ? operate GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some Press STOP to exit. 4. 30 outputted. press ENTER. 3. over ?I fthe video and audio structure of recorded and highlight not normally. folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the frame is screen second, this unit may per 1 Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec format " z "DIVX3.xx "MP43 Playable ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", ", "3IVX ". Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". ? Sampling frequency: within 8 48 kHz (MP3), - within 32 ? Bit rate: within 8 32 40 48kHz (WMA) 320kbps (MP3), 192kbps (WMA) - - - Additional Features-VCR part On Screen You may Video Doctor Display easily display the current time or tape counter, amount of tape left, day, month, year, day of week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will appear on the TV screen. If a recording is taking place these On Screen Displays the tape. 1. Press CLK/CNT to This feature informs you that there is a problem with your DVD/VCR Combi receiver. These error messages will appear on the TV screen. 1. will not be recorded onto Press i. Press 1 display options. display. repeatedly to select Dr. The tape VIDEO DOCTOR to the cycle through HEAD STATUS TAPE STATUS counter and amount of left will appear if there is a tape NO. OF TIMER PROGRAMME NEXT TIMER PROGRAMME loaded. P SET R REC Displays will clear majority of the On Screen leaving only the clock or tape ON OFF After 3 seconds the counter and the amount of Press CLK/CNT the TV again to tape left remove all on the screen. displays 2. Pr-12 ACMS NIC fOSD 2. or 2 Press OK. Press CLK/CNT tape (Self-Diagnosis) OK OPR Press 3 or 4 to check a problem. HEAD STATUS from O screen. PLEASE CLEAN: Clean your video heads. TAPE STATUS Tape Counter Memory Stop The Digital Tape Counter display window instead of O Insert displayed on the the time by pressing CLK/CNT on the remote control. The Digital Tape Counter indicates the relative positions of recordings on 1. the can be Shows the number of timer recording. NEXT TIMER PROGRAMME O or start The recording. will display the tape counter hours, minutes and seconds. Press STOP when playback or actual recording play PR-01 26 10:00~11:00SP Shows the current status of timer Press CLEAR to set the counter to 0:00:00. 2. tape with its protection tab in place NO. OF TIMER PROGRAMME Press CLK/CNT. in a O2 tape. Press PLAY NOT RECORDABLE: time 3. recording. Press i is complete. Press BACKWARD. The tape will rewind and automatically stop when the counter returns to 0:00:00. 41 Hi-Fi Stereo Sound System Your DVD/VCR Combi receiver will record and back Hi-Fi stereo sound. In addition it has NICAM play- stereo stereo sound decoder. This allows you digital to record and a playback the sound in several different ways. Video cassettes recorded on your DVD/VCR Combi receiver will have a normal mono audio track and two VHS Hi-Fi stereo audio tracks. These stereo tracks allow you to make audio recordings in Hi-Fi stereo or bilingual mode from a TV broadcast, stereo audio system, video disc or another DVD/VCR Combi receiver. 1. Your DVD/VCR Combi receiver's NICAM digital sound decoder allows you to enjoy broadcasts with NICAM sound, as well as standard stereo, bilingual and mono sound received played or the TV on sound. The particular type of briefly discouple of seconds: that recorded will be for screen a STEREO NICAM Sound is automatically stereo and mono recorded the Hi-Fi on tracks of the video tape. BIL NICAM Both audio channels will be recorded stereo tracks. The will be recorded primary language on the mono on the Hi-Fi channel (left) track of the video tape. MONO The sound is recorded mono 2. track of the video Press AUDIO on the Hi-Fi tracks and the tape without any separation. repeatedly until the desired audio mode appears. 3. The choice is STEREO, LEFT, RIGHT and MONO. In BIL NICAM playback the primary lan- guage is output on the left channel and the secondary channel is output simultaneously from the right channel when audio output is set to STEREO. The primary language willbe output from both channels when the audio Please note that when setting is MONO. adjusting the tracking control Hi-Fi stereo sound may revert to MONO. 42 Additional Features Last Scene Memory This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the If you load scene is player. memorized, the a disc that has the scene recalled. automatically Note: This player does not memorize the switch off the player before scene commencing of to a disc if you the disc. play Screen Saver The appears when you leave the DVD mode for about five minutes. screen saver player in Stop Video Mode Setting With certain ering or means discs, the playback picture may be flick- Dot Crawl is shown Vertical interpolation lines. That on straight or De-interlace is not perfectly matched with the disc. In this case, the picture quality may be improved by changing the video mode. To change the video mode, press and hold DISPLAY about 3 seconds new during disc playback. displayed on the TV screen. Check whether the video quality has improved. If not, repeat the above procedure until picture quality is improved. The video mode number selected is Video mode sequence: MODE1 → MODE2 → MODE3 → MODE1 If you turn off the power, the video mode will return to initial default state (MODE1). Detailed MODE1 or video MODE2 : Description The source material) : of each Video Mode material of the DVD video (film material is determined from disc information. Suitable for playing film based content or video by the progressive scan method. based material recorded MODE3 : Suitable for comparatively playing video based content with little motion. Note: The video mode Progressive setting only works when the Scan mode is set to "On" on the setup menu. 43 Copying from DVD To VCR Recording from This unit allows you to copy the contents of a DVD to a VHS tape with a press of the REC/ITR button. Notes: Be to set sure setup " on the menu. If the DVD you to copy is copy you may not be able to copy the disc. protected, 1. Scan" to "Off "Progressive are attempting Insert the disc you wish to copy in the DVD deck and close the disc tray. 2. 3. Insert VHS recorder With this video recorder you can make recordings from an external source, such as copying from another a blank VHS Copy the DVD to VHS videotape Tape camcorder. following description, this video recorder will be recording and will be referred to as VCR The other appliance will be used for playback and used for will be referred to 1. as VCR A. VCR A should be connected to the AUDIO L/R (VCR panel IN AV1)/VIDEO (VCR IN AV1) on the rear of your unit or AUDIO IN (L(MONO)/R) / VIDEO IN on the front panel of your unit. into the VCR deck. 2. Press the REC/ITR button. or a In the one Tape Insert video recorder Note B. Insert Disc another video Insert the recorded tape into VCR A and a blank tape into VCR B. The DVD will go into Play mode and the DVD/VCR Combi receiver will go into Record mode. If the DVD disc to press the 3. appears, you may need button manually to begin menu Play Press AV until the socket you wish to record from is displayed. (VCR B) AV 1 for recording from AUDIO L/R (VCR IN AV1)/ VIDEO (VCR IN AV1) terminals on the copying. of your unit. AV 2 for recording from AUDIO IN Note: VIDEO IN terminals If you press the REC/ITR button, be sure this DVD/VCR Combi receiver in DVD mode. 4. To start Stop the Copy playing, press STOP to end the copy. stop the Copy process manually ends, or the unit may when the DVD movie replay 44 press the REC/ITR VCR A. on VCR B Process When the DVD is finished You must on (L(MONO)/R)/ the front of your unit. recording, and PLAY 4. on rear and record over and over again. 5. When you want to finish on both video recorders. copying, press the STOP Presetting You can ing, make preset sure the Radio Stations 50 stations for FM and AM. Before tun- Preset radio stations in the DVD/VCR Combi receiver that you have turned down the memory first volume. 1. (see "Presetting radio stations" the on left). Press FM/AM the remote control on front on to the Radio Listening panel until the frequency the display and TV screen. or on the 1. band appears Press FM/AM the remote control on front on panel until the frequency the display and TV screen. or on the band appears The last received station is tuned in. 2. Press 3 / 4 on select the the remote control preset station you Each time you press the RADIO AM , receiver tunes in 01 522kHZ 3. OK, CLEAR one repeatedly to want. button, the DVD/VCR Combi preset station at a time. Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or on the remote control repeatedly. - To Clear the Stored Radio Stations RADIO FM Press 3 / 4 on Press FM/AM the remote control on front on OK, CLEAR , 2. 1. 06 108. 00MHZ panel until the frequency the display and TV screen. or on the Operation band appears the remote control to select your desired radio channel. 3. Press FM/AM front 4. panel on the remote control Hold down PRESET hold down 1 and 2 1 or 2 or on the to select the desired band. seconds, and ( 3 /4 ) on a on the front RADIO panel FM or 06 108. 00MHZ the remote control for , OK, CLEAR station is searched for automatically. 2. Press 3/4 on the remote control to select your desired station. RADIO FM 06 87. 50MHZ RADIO , AM OK, CLEAR , 5. Press MEMORY on 10 522kHZ OK, CLEAR the remote control. 3. Press CLEAR the remote control to clear the stored radio station. 6. Repeat steps 2 to 5 to store other stations. RADIO FM 10 98. 00MHZ , OK, CLEAR Note While record or record pause function may not be mode, the CLEAR operated. 45 Tuning into a Press FM/AM 1. Station on Manually the remote control front on panel until the frequency the display and TV screen. Press FM/AM 2. front panel on the the remote control or on the to select the desired band. Press PRESET 3. or on band appears (3/4) on the front panel or press 1 and 2 on the remote control to tune in the desired station. Tuning into a Station Hold down PRESET down 1 and 2 seconds, and a on (3/4) on Automatically the front panel the remote control for 1 station is searched for or or hold 2 automatically. Note The search may not weak signal. stop at a station with a very Mute Press MUTE to mute your unit. can mute your unit in order, for You answer the telephone, display. appear in the 46 example, to MUTING and MUTE indicator Reference Language Codes Use this list to Disc input your desired language for the following initial settings: Audio, Disc Subtitle, Disc Menu. Language Code 7678 Language Singhalese Code 7074 Language Lingala Code 6566 Language Fiji Code Abkhazian Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 7771 Somali 8379 Ameharic 6577 Galician 7176 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara Azerbaijani 6588 Greenlandic 7576 Marathi 7782 8476 6590 Guarani 7178 Moldavian 7779 Tagalog Tajik Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque Bengali; Bangla 6985 Hausa 7265 Nauru 7865 Tatar 8484 6678 Hebrew 7387 7869 Telugu 8469 Bhutani 6890 Hindi 7273 7879 Thai 8472 Bihari 6672 Hungarian 7285 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Bulgarian 6671 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Burmese 7789 Interlingua 7365 Persian 7065 Tu r kish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Tu rkmen 8475 Cambodian 7577 Italian 7384 Po r tuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volapuk 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English Esperanto 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 6979 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Country Choose a 8373 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT Fr ance FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK TR Costa Rica CR Italy IT Panama PA Turkey Uganda Croatia HR Jamaica JM PY Ukraine UA CZ JP Paraguay Philippines PH United States US KE Poland PL Uruguay UY KW Po r tugal PT Uzbekistan UZ LY Romania RO Vietnam VN LU Russian Federation RU Zimbabwe ZW Czech Republic Denmark DK Japan Kenya Ecuador EC Kuwait Egypt EG El Salvador SV Libya Luxembourg UG 47 Tr oubleshooting Check the following guide for the possible cause of a problem before Cause Symptom Correction No power. The power cord is disconnected. The power is on, but the DVD/VCR Combi No disc is inserted. Insert No disc the power cord into the wall outlet Plug securely. tape is inserted. picture. disc or tape. (Check that the tape indicator in the display a or window is receiver does not work. No service. contacting The TV is not set to receive DVD/VCR Select the Combi receiver on signal output. the TV lit.) appropriate video input the picture from the mode so DVD/VCR Combi receiver appears the TV screen. TV/VCR mode for DVD/VCR Combi Press the TV/VCR button receiver is set to TV. control TV on the remote on repeatedly to choose VCR mode. indicator disappears in the display window. Connect the video cable The video cable is not connected securely. securely. No sound. The connected TV power is turned off. Turn The Select the correct on theTV. cable is not set to receive DVD/VCR Combi receiver signal output. input mode on the audio you can listen to the sound from the DVD/VCR Combi receiver. The audio cables Connect the audio cables connected with the audio equipment are not connected receiver so securely. securely. The power of the equipment connected with the audio cables is turned off. The digital audio output position. is set to the wrong The playback picture is poor. The disc is Tape heads Tape is a receiver does not start playback. or was recorded on unplayable connected with Set the digital audio output to the position, then turn on the DVD/VCR Combi receiver again by pressing POWER. Use v/V for manual adjustment Insert No disc is inserted. No tape is inserted. An equipment Clean video heads. another VCR. The DVD/VCR Combi the Clean the disc. dirty. rental on the audio cables. correct dirty. are Tu rn a while disc or tracking tape is playing. tape. (Check that the disc or tape indicator in the window is lit.) Insert disc is inserted. a playable disc. display (Check the disc type, color system, and Regional code.) The disc is placed upside The disc is not placed Place the disc with the down. within the guide. Place the disc inside the dirty. Clean the disc. The level is set. Cancel the rating Video Head Whenever the disc side down. tray correctly guide. The disc is Rating on playback Rating function or change the level. Cleaning or ejected from your VCR the video head is automatically cleaned. cleaning should not be necessary. However dirt accumulating on the head after a long period of time can cause the playback picture to become blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old or damaged tapes might. a This should 48 video cassette is inserted into mean that additional head Cause Symptom This remote control uses the The remote control is not remote same buttons for VCR and DVD functions (ex. PLAY). Correction sensor pointed at the Point the remote control at the remote of the DVD/VCR Combi receiver. sensor of the DVD/VCR Combi receiver. The remote control is too far from the DVD/VCR Combi receiver. Operate (7 m). There is Remove the obstacle. an obstacle in the path of the remote the remote control within 23 ft control and the DVD/VCR Combi receiver. The batteries in the remote control the batteries with Replace are new ones. exhausted. This remote control the uses When same buttons for VCR and DVD functions (ex. PLAY). The tape does not using a VCR, first press the VCR DVD, first press button. When using a the CD/DVD button. The DVD/VCR Combi receiver is in the Press PAUSE/STEP during recording. RECORD PAUSE MODE. recording. The The or tape will run not rewind fast-forward. The tape is already fully rewound playback picture resume fast- Check the con- Set the TV to the Video channel or tape. If you're using only the RF cable for nection. (see Noise appears visual search. This is normal. Tu rn camcorder during p. 16). on and operate properly. Noise appears during normal playback. The automatic Breaks There is noticeable in Hi-Fi soundtrack. Recording to forwarded. does not appear while the tape is running. are (X) The automatic no tracking tracking cannot be The mode is tape loaded, has had its record started. mode is safety or the engaged. engaged. Tr y manual tracking (see p. 26). tape loaded Tr y manual tracking (see p. 26). tab removed. (another VCR, camcorder) properly connected. source not been has Insert a cover the hole where the tab tape, or using adhesive tape, was removed. Tape-to-tape editing not possible. Timer recording is won't work. The clock/or the timer have been set Confirm that the camcorder is incorrectly. connected. The timer is not Re-perform tings. engaged. properly the clock and/or timer set- Press POWER and confirm that the The loaded tape has had its record safety timer indicator is displayed on tab removed. DVD/VCR Combi receiver's Insert a Audio mode is not set insert a properly. the Display. pate with adhesive tape, or tape with the record safety tab intact. Select "STEREO" No Hi-Fi sound. ing AUDIO on by repeatedly pressthe remote control. Moisture Condensation Moisture condensation ? When the DVD/VCR Combi receiver is moved from cold ? place Under to a warm extremely In locations where moisture condensation may can occur: a ? the DVD/VCR Combi receiver plugged into an AC power outlet with POWER On. This will help prevent condensation. place. humid conditions. Keep occur: ? When condensation has occurred, wait for the DVD/VCR Combi receiver to using dry a few hours before it. 49 Specification General Power requirements consumption Dimensions (approx.) Mass (approx.) Operating temperature Refer to main label Power Refer to main label Timer 430X81X360mm(wxhxd) 5.8 kg (17.6 lbs) 5˚C to 40˚C (41˚F to 104˚F) 24-hour display type Operating humidity 5%to90% DVD Section Laser Semiconductor Signal system Frequency response PAL/NTSC laser, wavelength 650 nm DVD(PCM96kHz):8Hzto44kHz DVD(PCM48kHz):8Hzto20kHz CD:8Hzto20kHz Signal-to-noise ratio More than 65 dB Harmonic distortion Less than 1.0% Dynamic More than 60 dB range (analog out connectors only) (DVD, CD) Outputs S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin (C) 0.3 V (p-p) 75 ohms (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 x 1 VCR Section Head 6 heads helical system system Television format Recording scan PAL/SECAM colour azimuth system system PAL/MESECAM RF OUT G RF Modulator UHF 22 Tape speed 23.39 mm/s (SP), 16.69 mm/s (LP) (Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP), 11.12 mm/s (EP) SP: 4 h (E-240 tape), LP: 8 h (E-240 tape) About 180 min (E-180 tape) VIDEO: 1.0 V(p-p), 75 ohms, unbalanced 68 - (Adjustable) PAL/MESECAM; NTSC Maximum recording time Rewind time Input level Output level Signal-to-noise ratio AUDIO: -6.0 dBm, VIDEO: 1.0 V(p-p), more 75 than 47 kohms ohms, unbalanced VIDEO: More than 43 dB AUDIO: More than 72 dB More than 42 dB Dynamic range (Hi-Fi) (Mono) AUDIO: More than 85 dB Tuner Section Tuning FM: 87.5 range AM: 522 Intermediate frequency - - 108.0 MHz 1611 kHz FM: 10.7 MHz AM: 450 kHz Amplifier Section Stereo mode Surround mode 90W+90W(6ohmat1kHz,THD10%) Front: 90W + 90W (THD 10%) Centre: 90W Surround: 90W + Subwoofer: 150W 50 90W (4 (6 ohm at 1 ohm at 30 kHz, THD 10%) Hz, THD 10%) Speaker Section Satellite (LHS-CX640T) Type Impedance Frequency Response 2 2 Way Speaker 6Ω 120 - 20,000 Hz Sound Pressure Level 82 dB/W Rated 90W Input Power Max Input Power Net Dimensions (W Net Weight 180W H x x 104x233x120mm D) 1.0 Centre speaker (LHS-CX640C) Type Impedance Frequency Response 2 kg 2 Way Speaker 6Ω 120 - 20,000 Hz Sound Pressure Level 82 dB/W Rated 90W Input Power Max. Input Power Net Dimensions (W Net Weight (1m) (1m) 180 W H x x 220x114x110mm D) 1.0kg Passive Subwoofer (LHS-CX640W) Type Impedance Frequency Response 1 Way 1 Speaker 4Ω 40 1,500 Hz - Sound Pressure Level 83 dB/W Rated 150W Input Power Max Input Power Net Dimensions (W Net Weight (1m) 300W x H x 195x380x419mm D) 6.6 kg Accessories: AM/FM antenna, Design and Speaker cable specifications are Manufactured under license from Dolby x 6, RCA cable, Remote control subject Dolby to change Laboratories. x 1, Batteries (AAA) x 2 without notice. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Laboratories. "DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc. 51 P/N: 3834RH0086Q
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021