LG | LHB755W | LG LHB755W Owner’s Manual

ENGLISH
OWNER’S MANUAL
3D Blu-ray™ /
DVD Home
Theater System
Please read this manual carefully before operating
your set and retain it for future reference.
LHB755W (LHB755W, S75T1-S/W, S74T1-C, W5-2)
www.lg.com
LHB755W-FX.BARELLK_ENG.indd 1
2015-02-05 �� 3:16:05
LHB755W-FX.BARELLK_ENG.indd 2
2015-02-05 �� 3:16:05
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
LHB755W-FX.BARELLK_ENG.indd 3
1
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.
NOTICE: For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom or rear of the
apparatus.
2015-02-05 �� 3:16:05
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
POWER: This unit operates on a mains supply of
200 - 240 V~, 50/60Hz.
WIRING: This unit is supplied with a BS 1363
approved main plug. When replacing the fuse,
always use of the same rating approved to BS 1362.
Never use this plug with the fuse cover omitted.
To obtain a replacement fuse cover contact your
dealer. If the type of plug supplied is not suitable
for the mains sockets in your home, then the plug
should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains
lead of this unit must be destroyed. A mains plug
with bared wires is hazardous if inserted in a mains
socket. Do not connect either wire to the earth pin,
marked with the letter E or with the earth symbol
6 or coloured green or green and yellow. If any
other plug is fitted, use same rating of fuse in the
plug.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying
the terminals in your plug, proceed as follows: The
wire which is coloured blue must be connected
to the terminal which is marked with the letter
N or coloured black. The wire which is coloured
brown must be connected to the terminal which is
marked with the letter L or coloured red.
LHB755W-FX.BARELLK_ENG.indd 4
Notes on copyrights
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
content. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected content. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
2015-02-05 �� 3:16:05
Getting Started
5
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
Only the multi system colour TV can receive all
signals output from the player.
yy If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
1
Getting Started
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
yy The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
LHB755W-FX.BARELLK_ENG.indd 5
2015-02-05 �� 3:16:05
6
Table of Contents
Table of Contents
1
Getting Started
3
Safety Information
8Introduction
8
– Playable discs and symbols used in
this manual
9
– About the “7” symbol display
9
– Regional code
9
– System Select
9
– Supplied Accesorries
10 Remote Control
11 Front Panel
11 Rear Panel
2Connecting
12
13
13
13
14
14
14
15
16
16
16
17
18
18
18
19
20
20
21
22
22
Positioning the system
Speaker Connection
– Attaching the speakers to the player
– Attaching the rear speakers to the
wireless receiver
Wireless speakers connection
– Setting up the wireless receiver for
the first time
– Manually pairing wireless receiver
Connecting to your TV
– What is SIMPLINK?
– ARC (Audio Return Channel) function
– Resolution setting
Antenna connection
Connections with external device
– AUX Connection
– OPTICAL IN connection
– HDMI IN 1/2 connection
Connecting to your Home Network
– Wired network connection
– Wired network setup
– Wireless network connection
– Wireless network setup
LHB755W-FX.BARELLK_ENG.indd 6
3 System Setting
25 Initial Setup
26Settings
26 – Adjust the setup settings
27 – [NETWORK] menu
28 – [DISPLAY] menu
29 – [LANGUAGE] menu
30 – [AUDIO] menu
32 – [LOCK] menu
33 – [OTHERS] menu
4Operating
35
36
36
36
36
37
37
39
40
41
41
41
41
41
42
43
43
43
43
44
44
45
45
46
47
47
47
47
48
48
48
Sound Effect
Home Menu Display
– Using [HOME] menu
Playing the Linked Devices
– Playing a disc
– Playing Blu-ray 3D disc
– Playing a file on disc/USB device
– Playing a file on Android device
– Playing a file on a network server
Using Home Network Server for PC
– About SmartShare PC Software
– Downloading SmartShare PC
Software
– Installing SmartShare PC Software
– Sharing files and folders
– System requirements
General Playback
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last scene memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
2015-02-05 �� 3:16:06
Table of Contents
48
49
49
50
50
50
51
51
52
52
52
52
53
53
54
54
54
54
54
54
55
56
57
57
58
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
– Playing file encoded in 3D
Advanced Features
– Enjoying BD-Live™
– LG AV Remote
– Private Sound Mode
– Audio CD recording
– Recording from FM radio or AUX
source
Radio Operations
– Listening to the radio
– Presetting the Radio Stations
– Deleting a saved station
– Deleting all the saved stations
– Improving poor FM reception
Using the Premium
Enjoying with LG Multi-room Audio (LG
Music Flow)
Using BLUETOOTH® wireless technology
– Listening to music stored on the
BLUETOOTH devices
LG Sound Sync
7
5Troubleshooting
60Troubleshooting
60 – General
61 – Network
62 – Picture
62 – Sound
62 – Customer Support
62 – OPEN SOURCE SOFTWARE NOTICE
1
2
6Appendix
63 Controlling a TV with the Supplied
Remote Control
63 – Setting up the remote to control your
TV
64 Network Software Update
64 – Network update notification
64 – Software update
66 Additional Information
66 – File requirement
67 – AVCHD (Advanced Video Codec High
Definition)
68 – About DLNA
68 – Certain system requirements
68 – Compatibility notes
69 Audio Output Specifications
70 Area Code List
71 Language Code List
72 Trademarks and Licenses
74Specifications
76Maintenance
76 – Handling the unit
76 – Notes on discs
77 Important Information relating to Network
Services
3
4
5
6
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
LHB755W-FX.BARELLK_ENG.indd 7
2015-02-05 �� 3:16:06
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
Blu-ray
y
u
i
r
DVD-ROM
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW (VR)
r
VR mode and finalized only
Audio CD
t
Audio CD
CD-R/RW
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
Note
–
Caution
–
LHB755W-FX.BARELLK_ENG.indd 8
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible damages
from abuse.
2015-02-05 �� 3:16:06
Getting Started
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
-
-
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
+
+
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
LHB755W-FX.BARELLK_ENG.indd 9
Regional code
This unit has a regional code printed on the bottom
or rear of the unit. This unit can play only BD-ROM
or DVD discs labeled same as the bottom or rear of
the unit or “ALL”.
1
System Select
Open the disc tray using the B (OPEN/CLOSE)
button and then, press and hold M (PAUSE) for
more than five seconds to change the color system
(PAL /NTSC /AUTO).
-
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
About the “7” symbol display
-
,,Note
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
Supplied Accesorries
+
+
Remote control (1)
Speaker cables (5)
FM antenna (1)
Batteries (2)
HDMI cable (1)
PC Software CD (1)
2015-02-05 �� 3:16:07
10
Getting Started
Remote Control
1
• • • • • • a • • • • • • Getting Started
1 (POWER): Switches the player
ON or OFF.
B (OPEN/CLOSE): Opens and
closes the disc tray.
FUNCTION: Changes input mode.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password or network
connection.
BACK ( ): Exits the menu or
returns to the previous screen.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s popup
menu, if available.
• • • • • • b • • • • • •
• • • • • • d • • • • • •
Z (STOP): Stops playback.
z (PLAY): Starts playback.
M (PAUSE): Pauses playback.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
Colored (R, G, Y, B) buttons:
- Use to navigate BD-ROM menus.
They are also used as shortcut
buttons for specific menus.
- B button: Selects mono/ stereo
in FM mode.
SUBTITLE: Selects a subtitle
language.
AUDIO: Selects an audio language
or audio channel.
SOUND EFFECT: Selects a sound
effect mode.
SLEEP: Sets a certain period of
time after which the unit will
switch to off.
VOL +/-: Adjusts speaker volume.
? : This button is not available.
OPTICAL/TV SOUND: Changes
input mode to optical directly.
MIC/ECHO:
Selects the microphone mode or
microphone’s echo mode. After
selecting the desired mode, press
VOL +/- to adjust microphone
volume or microphone’s echo
volume.
MUTE: Mute the unit.
• • • • • • c • • • • • •
HOME ( ): Displays or exits the
[Home].
LHB755W-FX.BARELLK_ENG.indd 10
ENTER (b): Acknowledges menu
selection.
DISC MENU: Accesses menu on a
disc.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA) batteries
with 4 and 5 matched correctly.
TUNING +/-: Tunes in the desired
radio station.
REPEAT (h): Repeats a desired
section or sequence.
c/v (SCAN): Searches
backward or forward.
Battery Installation
PRESET +/-: Selects programme
of Radio.
USER EQ: You can adjust the
sound by raising or lowering the
level of specific frequency.
INFO/MENU (m): Displays or
exits On-Screen Display.
X (REC): Records from an Audio
CD, FM radio, or AUX source to
USB.
TV Control Buttons: See page 63.
Direction buttons (W/S/
A/D): Selects an option in the
menu.
2015-02-05 �� 3:16:07
Getting Started
11
Front Panel
a
b
a Disc Tray
f
d
g
1
Getting Started
e
c
g Operation buttons
R (OPEN/CLOSE)
T (PLAY / PAUSE)
I (STOP)
F (Function)
Changes the input source or function.
1/I (POWER)
b Remote Sensor
c Display Window
d Volume Control
e MIC 1/2
f USB Port
Rear Panel
a
b
c
d e
f
g hi
a AC power cord
f HDMI IN 1/2
b Cooling Fan
g Antenna Connector
c Speakers connectors
h AUX (L/R) INPUT
d LAN port
i OPTICAL IN
e HDMI OUT (TV ARC)
LHB755W-FX.BARELLK_ENG.indd 11
2015-02-05 �� 3:16:07
B
A
F
A
D
2
Connecting
A
Positioning the system
E
A
The following illustration shows an example of
positioning the system. Note that the illustrations
Ain these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A). A B C D E F G
B
C
A
A
A
GB
A
A
E
E
A
E
A
D
A
yy Place the center speaker at a safe distance
from the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
yy Before using the subwoofer, remove the
protective vinyl.
G
F
A
>>Caution
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
yy The speakers contain magnetic parts, so
colour irregularity may occur on the CRT
TV screen or PC monitor screen. Please use
the speakers away from the TV screen or PC
monitor screen.
B
B
C
B
CA A
C GA
D
GA
B
A A
A A
B
A
A
C
CG
G
A
B A
A A
A
C
G
Connecting
12
E
A ABCD E F G
A
speaker (L)/
A A Front
B Cleft
D
EE F G
A D right
speaker
(R):
C
F
A A B Front
E
G
E
A
Place the front speakers to the sides of the monitor
or screen and as flush with the screen surface as
possible.
E
F G
A AA
B C Center
D E speaker:
Place the center speaker above or below the
monitor or screen.
A A B C D Surround
E F G left speaker (L)/
right speaker (R):
F G
A A B C D E Surround
A
Place these speakers behind your listening position,
E
facing slightly inwards.
A A B C D E F Subwoofer:
G
The position of the subwoofer is not so critical,
because low bass sounds are not highly directional.
But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of
the room to reduce the wall reflections.
A B C D E F G Unit
LHB755W-FX.BARELLK_ENG.indd 12
2015-02-05 �� 3:16:08
Connecting
Speaker Connection
Attaching the speakers to the
player
1. Connect speaker wires to the player.
Each speaker wire is color-coded. Use matching
color wires for corresponding speakers.
Attaching the rear speakers to
the wireless receiver
Connect the rear speakers to the wireless receiver
with the speaker cords.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
(+)
(-)
Color
Speaker
Position
Grey
Rear right
Rear right
Blue
Rear left
Rear left
2
Connecting
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
13
Connect a woofer cord to the player. When
connecting a woofer cord to the player, insert
the connector until it clicks.
Color
Speaker
Position
Green
Center
Center
Orange
Sub
woofer
Any front position
Red
Front
Front right
White
Front
Front left
2. Connect the speaker wire to the terminal on the
speaker.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
LHB755W-FX.BARELLK_ENG.indd 13
2015-02-05 �� 3:16:08
14
Connecting
,,Note
Wireless speakers
connection
2
yy If there is a strong electromagnetic wave
product nearby, interference may occur. Put
the unit (wireless receiver and main unit)
away from there.
Setting up the wireless
receiver for the first time
yy It takes a few seconds (and may take longer)
for the main unit and the wireless receiver
to communicate with each other.
1. Connect the power cord of the wireless receiver
to the outlet.
yy The available range is 20 m for wireless
connection in an open place.
Connecting
2. When you turn on the main unit, the wireless
speakers connection will be completed
automatically.
-- When the connection is completed, you can
see the yellow-green LED on the wireless
receiver and the indicator ( ) on the main
unit.
LED indicator of wireless receiver
LED Color
Operation
Yellow-green
(Blink)
The wireless receiver is trying to
connect.
Yellow-green
The connection is completed.
Red
The wireless receiver is
in standby mode or the
connection is failed.
Off
(No display)
The power cord of wireless
receiver is disconnected.
Manually pairing wireless
receiver
When your connection is not completed, you can
see the red LED or the blinking yellow-green LED
on the wireless receiver and the rear speakers are
not made sound. To solve the problem, follow the
below steps.
1. Adjust the volume level of the main unit to
minimum.
-- ”VOL MIN” appears on the display window.
2. Press and hold (MUTE) on the remote control
for about 3 seconds.
-- “WL RESET” appears on the display window
briefly.
3. If the LED of the wireless receiver already blinks
in yellow-green continually, you can skip this
step.
Press and hold PAIRING on the rear of the
wireless receiver for more than 5 seconds.
-- The LED of the wireless receiver lights up
alternately in red and yellow-green.
4. Disconnect the power cord of the main unit
and the wireless receiver.
5. Connect them again after the LED of the main
unit and the wireless receiver are fully turned
off.
The main unit and the wireless receiver will
be paired automatically when you turn on the
main unit.
-- When the connection is completed, you can
see the yellow-green LED on the wireless
receiver and the indicator ( ) on the main
unit.
LHB755W-FX.BARELLK_ENG.indd 14
2015-02-05 �� 3:16:08
Connecting
Connecting to your TV
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
15
Additional information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
2
Connecting
Rear of the unit
-- The picture will not be displayed properly
with non-HDCP device.
HDMI
cable
TV
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution setting” on page 16)
Set the TV’s source to HDMI (refer to TV’s owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (page 29).
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m (15 ft.)).
LHB755W-FX.BARELLK_ENG.indd 15
2015-02-05 �� 3:16:08
16
Connecting
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
2
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Connecting
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
1. Press HOME ( ).
2. Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/S to select [DISPLAY] option then
press D to move to the second level.
4. Use W/S to select the [Resolution] option
then press ENTER (b) to move to the third level.
,,Note
yy Depending on the disc type or playing
status, some SIMPLINK operation may differ
from your purpose or not work.
yy The SIMPLINK function is not supported for
the device with SIMPLINK is connected to
HDMI IN jack.
5.Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of this player.
To use this function:
-- Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
-- The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
-- You must connect with the HDMI IN that
supports the ARC function using the HDMI OUT
on this player.
-- You can connect only one Home Theater to TV
compatible with ARC.
,,Note
To activate [SIMPLINK / ARC] function, set this
option to [On]. (page 34)
LHB755W-FX.BARELLK_ENG.indd 16
2015-02-05 �� 3:16:09
Connecting
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1.Press B to open the disc tray.
17
Antenna connection
Connect the supplied antenna for listening to the
radio.
2.Press Z (STOP) for more than 5 seconds.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
2
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
Connecting
yy If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
Rear of the unit
,,Note
After connecting the FM wire antenna, be sure
to fully extend it.
LHB755W-FX.BARELLK_ENG.indd 17
2015-02-05 �� 3:16:09
18
Connecting
Connections with
external device
AUX Connection
You can enjoy the sound from an external
component through the speakers of this system.
2
Connecting
Connect the analog audio output jacks of your
component into the AUX L/R (INPUT) on this unit.
And then select the [AUX] option by pressing
FUNCTION.
You can also use the F (Function) button on the
front panel to select the input mode.
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your component
into the OPTICAL IN jack on the unit. And then
select the [OPTICAL] option by pressing FUNCTION.
Or press OPTICAL/TV SOUND to select directly.
You can also use the F (Function) button on the
front panel to select the input mode.
Rear of the unit
Rear of the unit
White
Red
To the digital
optical output jack
of your component
To the audio output jacks
of your component
(TV, VCR, etc.)
LHB755W-FX.BARELLK_ENG.indd 18
2015-02-05 �� 3:16:09
Connecting
19
HDMI IN 1/2 connection
You can enjoy the pictures and sound from your
component through this connection.
Connect the HDMI OUT jack of your component
into the HDMI IN 1 or 2 jack on this unit. And
then select the [HDMI IN 1/2] option by pressing
FUNCTION.
You can also use the F (Function) button on the
front panel to select the input mode.
Connecting
Rear of the unit
2
To the HDMI
OUT jack of your
component
(set-top box, digital
satellite receiver,
video game
machine, etc.)
,,Note
yy You cannot change the video resolution in
the HDMI IN 1/2 mode. Change the video
resolution of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to
HDMI IN 1/2 jack, change the resolution
of your personal computer to 576p, 720p,
1080i or 1080p.
yy The player sends audio from the HDMI
inputs to both the HDMI output and to the
unit’s speakers.
LHB755W-FX.BARELLK_ENG.indd 19
2015-02-05 �� 3:16:09
20 Connecting
Connecting to your
Home Network
2
Connecting
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
Wired network connection
Broadband
service
Router
DLNA certified servers
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Rear of the unit
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNAcompatible digital media servers, this player
must be connected to the same local area
network with them via a router.
yy To set your PC as a DLNA-compatible digital
media server, install the SmartShare PC
Software on your PC. (page 41)
LHB755W-FX.BARELLK_ENG.indd 20
2015-02-05 �� 3:16:09
Connecting
Wired network setup
Advanced Setting
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
If you want to set the network settings manually,
use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
21
1. Use W/S to select [Wired] and press ENTER
(b).
2
Preparation
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
2.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
Connecting
Before setting the wired network, you need to
connect the broadband internet to your home
network.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
LHB755W-FX.BARELLK_ENG.indd 21
2015-02-05 �� 3:16:10
22 Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
Preparation
Before setting the wireless network, you need
to:
-- connect the broadband internet to the
wireless home network.
-- set the access point or wireless router.
-- note the SSID and security code of the
network.
2
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
Wireless
Communication
DLNA certified servers
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Access Point or
Wireless Router
Broadband
service
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3.Use W/S to select a desired SSID of wireless
network and press ENTER (b).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Settings]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
LHB755W-FX.BARELLK_ENG.indd 22
If you have security on your access point, you
need to input the security code as necessary.
,,Note
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
2015-02-05 �� 3:16:10
Connecting 23
Advanced Setting
If you want to set the network settings manually,
use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use W/S to select [Wireless] and press ENTER
(b).
,,Note
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
4.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
5. Select [Next] and press ENTER (b) to apply
network settings.
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
Connecting
yy An Access Point is a device that allows you
to connect to your home network wirelessly.
2
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(WiFi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
2. Follow the instructions of each connection
method on the screen.
Network connection status is displayed on the
screen.
6. Select [OK] and press ENTER (b) to complete
the network connection.
LHB755W-FX.BARELLK_ENG.indd 23
,,Note
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
2015-02-05 �� 3:16:10
24 Connecting
Notes on network connection
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet content may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth devices, microwave oven, and can be
affected by interference from them.
yy Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
yy For the purpose of the better transmission,
placing the player from the access point as close
as possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
yy Move closer to the access point if possible or reorient the player so there is nothing between it
and the access point.
yy The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
yy Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
LHB755W-FX.BARELLK_ENG.indd 24
2015-02-05 �� 3:16:10
System Setting 25
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
5.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/D to select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
3
Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
Network connection status is displayed on the
screen.
System Setting
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
For details on network settings, refer to
“Connecting to your Home Network” on page
20.
7. Select [Next] and press ENTER (b).
8. Press ENTER (b) to verify the test tone signals of
the speakers.
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use W/S to select [Wired Network]
or desired SSID of wireless network and press
ENTER (b).
After verifying the test tone signals, press ENTER
(b) while [Stop] is highlighted. Select [Next]
and press ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
LHB755W-FX.BARELLK_ENG.indd 25
2015-02-05 �� 3:16:10
26 System Setting
9. You can listen to TV sound through this unit’s
speaker automatically when TV is turned on.
Settings
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME ( ).
Press W to move and press A/D to select [On]
or [Off ]. Select [Next] and press ENTER (b).
10. Check all the settings that you have set in the
previous steps.
3
System Setting
2.Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
11.Displays private sound mode guide. Press ENTER
(b).
3.Use W/S to select the first setup option, and
press D to move to the second level.
12.Displays the guide to enjoy online contents
using LG AV Remote. Press ENTER (b).
4.Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5.Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
LHB755W-FX.BARELLK_ENG.indd 26
2015-02-05 �� 3:16:11
System Setting 27
[NETWORK] menu
Smart Service Setting
The [NETWORK] settings are needed to use the
software update, BD-Live and online content
services.
[Country Setting]
Connection Setting
[Initialize]
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See “Connecting to your Home
Network” on page 20.)
Depending on the region, [Initialize] function
may not be available.
Connection Status
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
content.
[Partially permitted]
Internet access is permitted only for BD-Live
content which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live content without a
certificate.
[Prohibited]
Internet access is prohibited for all BD-Live
content.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
3
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
System Setting
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
Select your area for displaying proper online
content service.
,,Note
yy This unit and the DLNA Certified
Smartphone must be connected to the
same network.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
( ) to display the home menu before
connecting to this unit.
yy While controlling the unit using the
[Network Play] function, the remote control
may not work.
yy Available file formats described on page 66
are not always supported on [Network Play]
function.
LHB755W-FX.BARELLK_ENG.indd 27
2015-02-05 �� 3:16:11
28 System Setting
[DISPLAY] menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 16 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
3
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[720p]
[4:3 Letter Box]
System Setting
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Outputs 576 lines of progressive video.
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
LHB755W-FX.BARELLK_ENG.indd 28
2015-02-05 �� 3:16:11
System Setting 29
HDMI Color Setting
[LANGUAGE] menu
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
Display Menu
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
3D Mode
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Blu-ray 3D disc playback will output as 3D
mode.
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
71.
[Off]
[Off] (Disc Subtitle only)
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
Turn off Subtitle.
[On]
Home Menu Guide
This function allows you to display or delete the
guide bubble on the [HOME] menu. Set this option
to [On] for displaying guide.
LHB755W-FX.BARELLK_ENG.indd 29
3
System Setting
Select the type of output mode for Blu-ray 3D disc
playback. (This function is activated only when 3D
TV is connected.)
Select a language for the [Settings] menu and onscreen display.
,,Note
Depending on the disc, your language setting
may not work.
2015-02-05 �� 3:16:11
30 System Setting
[AUDIO] menu
DRC (Dynamic Range Control)
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 69 for details.
Digital Output
[Auto]
3
System Setting
Select if you connect this unit’s HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
[PCM]
Select if you connect this unit’s HDMI OUT jack
to a device with digital decoder.
[DTS Re-Encode]
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Off]
Turns off this function.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
Select if you connect this unit’s HDMI OUT jack
to a device with DTS decoder.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [Auto]).
yy This setting is not available on the input
signal from an external device.
LHB755W-FX.BARELLK_ENG.indd 30
2015-02-05 �� 3:16:11
System Setting
31
Speaker Setup
Semi Karaoke
To obtain the best possible sound, use the speaker
setup display to specify the volume of the speakers
you have connected and their distance from your
listening position. Use the test to adjust the volume
of the speakers to the same level.
When a chapter/ title is fully finished, this function
shows the score on the screen with a fanfare sound.
[On]
When you finished singing a score will appear
on the screen.
[Off]
Fanfare and score do not appears on the
screen.
,,Note
Select a speaker that you want to adjust.
[Volume]
Adjust the output level of each speaker.
[Distance]
yy T he Semi Karaoke function is available only
when a microphone is connected.
yy The fanfare and score is applied for only
BD-ROM and DVD-title playback.
3
System Setting
[Speaker]
hen you watch movies, “Off ” the Semi
yy W
Karaoke at the Setup menu or enjoy it
without connecting the microphone if the
fanfare or score appears during changing a
chapter.
Adjust the distance between each speaker and
the listening position.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive:
this is called HD AV Sync. Use A D to scroll up and
down through the delay amount, which you can
set at anything between 0 and 300 ms.
LHB755W-FX.BARELLK_ENG.indd 31
2015-02-05 �� 3:16:11
32 System Setting
[LOCK] menu
DVD Rating
The [LOCK] settings affect only Blu-ray Disc and
DVD playback.
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
3
[None]
System Setting
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
LHB755W-FX.BARELLK_ENG.indd 32
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray disc that containing the
Advanced Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 70.
2015-02-05 �� 3:16:11
System Setting 33
[OTHERS] menu
TV Sound Connecting
Quick Start
You can listen to TV sound through this unit’s
speaker automatically when TV is turned on.
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
,,Note
yy When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off ].
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about 5 minutes. If you
set this option to [On], the unit automatically
turns off within 15 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
,,Note
When you set [Auto Power Off ] function in
setting menu on, this unit will be off itself to
save electronic consumption in the case main
unit is not connected to external device and is
not used for 20 minutes.
So does this unit after six hours since Main unit
has been connected to other device using
analog input.
Press W to move and press A/D to select [On] or
[Off ]. Select [OK] and press ENTER (b).
,,Note
When [TV Sound Connecting] and [Quick
Start] functions are on and this unit is turned
off, if a previously paired Bluetooth device
tries to pair with this unit, this unit turns on
automatically.
Initialize
3
System Setting
yy If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live content from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit.
LHB755W-FX.BARELLK_ENG.indd 33
2015-02-05 �� 3:16:11
34 System Setting
Software
[Information]
Displays the current software version.
[OSS Notice]
LGE Open Source Software Notice is displayed.
[Update]
You can update the software by connecting
the unit directly to the software update server
(page 64).
SIMPLINK / ARC
3
-- The SIMPLINK function allows you to control this
unit with LG TV’s remote control.
System Setting
-- The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
Set this option to [On] for activating [SIMPLINK /
ARC] function. (page 16)
Terms of Service
Privacy Policy for Blu-ray Disc™ Player is displayed.
To use the Premium Service and SW Updates, select
[Agree].
LHB755W-FX.BARELLK_ENG.indd 34
2015-02-05 �� 3:16:12
4Operating
Operating 35
Sound Effect
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
Setting the [User EQ]
You can adjust the sound by raising or lowering the
level of specific frequency. Press USER EQ.
[Standard]: You can enjoy optimized sound.
[Music]: You can enjoy comfortable and natural
sound.
[Cinema]: You can enjoy more immersive and
cinematic surround sound.
1.Use W/S to select the desired frequency.
[Flat]: Provides balanced sound.
2.Use A/D to select the desired level.
[Boost]: Boosts the mid-range for sound
reinforcement.
Select [Cancel] option then press ENTER (b) to
cancel the setting.
Select [Reset] option then press ENTER (b) to reset
the all adjustments.
[Treble / Bass]: Reinforces the treble and bass.
[Football]: You can enjoy a feeling of presence in
the stadium when watching the football match
broadcast.
[Power Front]: You can enjoy the harmonious
sound. This mode is suited for all the speakers were
placed in a row.
LHB755W-FX.BARELLK_ENG.indd 35
Operating
[Bass Blast]: Reinforce the bass sound effect from
front left and right speaker and subwoofer.
4
2015-02-05 �� 3:16:12
36 Operating
Home Menu Display
Playing the Linked
Devices
Using [HOME] menu
The home menu appears when you press HOME
( ). Use W/S/A/D to select a category and
press ENTER (b).
Playing a disc
erot
1.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
2.Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3.Press HOME ( ).
4. Select [Movie] or [Music], and select disc icon.
a [Movie] - Plays video content.
4
b [Photo] - Plays photo content.
Operating
c [Music] - Plays audio content.
d [Premium] - Displays the Premium home
screen. (page 55)
e [Input] - Changes input mode.
f [Settings] - Adjusts the system settings.
,,Note
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
yy Depending on the BD-ROM titles, an USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD-VR format discs may not
be played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
LHB755W-FX.BARELLK_ENG.indd 36
2015-02-05 �� 3:16:12
Operating 37
Playing Blu-ray 3D disc
e
This player can play the Blu-ray 3D disc which
contains separate views for the left and right eyes.
Preparation
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
Playing a file on disc/USB
device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
1. Insert a data disc on the tray or connect an USB
device.
yy Check your TV is 3D capable and has HDMI
input(s).
ear 3D glasses to enjoy the 3D experience
yy W
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
onnect an HDMI cable (Type A, High
yy C
Speed HDMI™ Cable) between the player’s
HDMI output and TV’s HDMI input.
2.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3.Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4
Operating
1.Press HOME ( ), and set the [3D Mode] option
on the [Settings] menu to [On] (page 29).
When you connect the USB device on the HOME
menu, the player plays an audio file contained in
the USB storage device automatically. If the USB
storage device is containing various types of files, a
menu for the file type selection will appear.
4. Select Disc or USB and press ENTER (b).
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a video
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
a Displays all linked device.
b Displays video, photo or audio content.
c Displays the file or folder on linked device.
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
LHB755W-FX.BARELLK_ENG.indd 37
2015-02-05 �� 3:16:12
38 Operating
Notes on USB device
yy This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live and Audio CD recording, use the USB
flash drive / external HDD formatted in FAT32.
yy This unit can support up to 4 partitions of the
USB device.
yy Do not extract the USB device during operation
(play, etc.).
yy An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
yy USB device: USB device that supports USB1.1
and USB2.0.
yy Video, audio and photo files can be played.
For details of playing each file, refer to relevant
pages.
4
yy Regular back up is recommended to prevent
data loss.
Operating
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
yy Some USB device may not work with this unit.
yy Some digital cameras and mobile phones are
not supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
LHB755W-FX.BARELLK_ENG.indd 38
2015-02-05 �� 3:16:12
Operating 39
Playing a file on Android
device
yui
Notes on Connecting Android device
This player can play video, audio and photo files
contained in the Android device.
yy Do not extract the Android device during
operation (play, etc.).
1. Connect the Android device to the unit with
USB cable. Make sure that MTP is activated on
Android device.
yy Video, audio and photo files can be played.
For details of playing each file, refer to relevant
pages.
yy This unit can support only MTP (Media Transfer
Protocol) Android (4.0 or later is recommended)
devices.
yy Regular back up is recommended to prevent
data loss.
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select [MTP] using A/D and press ENTER (b).
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the Android device may not be
recognized.
yy Some Android devices may not work with this
unit.
yy When you use MTP, playing some music, photo,
movie, or subtitle files may not work depending
on the Android device.
4
Operating
File loading may take few minutes depending
on the number of content stored in the Android
device.
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
LHB755W-FX.BARELLK_ENG.indd 39
2015-02-05 �� 3:16:12
40 Operating
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA-compatible digital media server
through your home network.
1. Check the network connection and settings
(page 20).
2.Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
,,Note
yy The file requirements are described on page
66.
yy The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
yy The subtitle file name and video file name
have to be the same and located at the
same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA-compatible digital
media server, install the SmartShare PC
Software on your PC. (page 41)
4
Operating
4. Select DLNA media server in the category using
A/D and press ENTER (b).
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
LHB755W-FX.BARELLK_ENG.indd 40
2015-02-05 �� 3:16:12
Operating
Using Home Network
Server for PC
Before connecting to PC to play a file, SmartShare
PC software should be installed on your PC.
About SmartShare PC
Software
SmartShare PC Software is for sharing video, audio
and photo files stored on your computer to this
unit as a digital media server.
Downloading SmartShare PC
Software
,,Note
1. Start up your computer, visit http://www.lg.com.
If necessary, select your region.
2. Click support tab.
3. Fill your model name on the cover of owner’s
manual in search bar.
4. Find and download the “SmartShare PC
Software” file.
Installing SmartShare PC
Software
1. Before installation, close all running programs
including firewall and Anti-Virus programs.
2. Unzip and double-click “Setup.exe” to install
SmartShare PC Software. The installation is
prepared and the installation wizard appears.
3. Follow the directions of the installation wizard
displayed on the screen.
4. Click the [Exit] button to complete the
installation.
LHB755W-FX.BARELLK_ENG.indd 41
,,Note
yy SmartShare PC software is not supported
with Mac OS.
yy The SmartShare PC software is a customized
software edition only for sharing files and
folders to this player.
yy This manual explains operations with the
English version of SmartShare PC software
as examples. Follow the explanation
referring to the actual operations of your
language version.
Sharing files and folders
On your computer, you must share the folder
containing video, audio and/or photo content to
play them on this player.
This parts explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “SmartShare” icon.
2. Click [Movie], [Photo] or [Music] icon on the
center, and then click [Settings] on the top
right corner of the SmartShare PC software. The
[Settings] menu appears on the screen.
4
Operating
If the SmartShare PC Software disc is supplied,
you can install SmartShare PC Software on
your PC by the disc.
41
3. Click [My Shared Contents] tab, and then click
icon. The [Add/Remove Shared Folders]
menu appears on the screen.
4. Click the folder containing the files you want
to share and then click the [OK]. The checked
folder is added to the [My Shared Contents]
and then click the [OK] at the bottom of the
[Settings] menu.
5 Make sure that the SmartShare service turns on
at the [Service] tab.
,,Note
yy If the shared folders or files are not displayed
on the player, click the [My Shared Contents]
on the [Settings] menu, and then click
icon.
yy For more information, click [HELP] on the
[Settings] menu.
2015-02-05 �� 3:16:13
42 Operating
System requirements
Minimum System
yy CPU : Intel® 2.0 GHz or AMD Sempron™ 2000+
processors
yy Memory : 1 GB of free RAM
yy Graphics card : 64 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher),
Windows Vista®, Windows® 7 or higher
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
Recommended System
4
yy CPU : Intel® Core™ Duo or AMD Athlon™ 64X2,
1.7 GHz or better
yy Memory : 2 GB of free RAM
Operating
yy Graphics card : 128 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher),
Windows Vista®, Windows® 7 or higher
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
LHB755W-FX.BARELLK_ENG.indd 42
2015-02-05 �� 3:16:13
Operating 43
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press Z (STOP) during playback.
To pause playback
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) during video playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
To scan forward or backward
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
(Video)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D
to go to the previous or next photo.
Using the disc menu
ero
4
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
Operating
Press c or v to play fast forward or fast reverse
during playback.
Press d (PLAY) to start slide show.
Use W/S/A/D buttons to navigate through
menu items.
To display the Popup menu
Some BD-ROM discs contain Popup menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/D buttons to navigate through menu
items.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
LHB755W-FX.BARELLK_ENG.indd 43
2015-02-05 �� 3:16:13
44 Operating
Resume playback
eroyt
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
4
Last scene memory
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
Operating
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
LHB755W-FX.BARELLK_ENG.indd 44
2015-02-05 �� 3:16:13
Operating 45
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using A/D, and press
ENTER (b).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
a Title – Current title number/total number of
titles
b [Disc Menu] - Accesses menu on a disc.
b Chapter – Current chapter number/total
number of chapters
c [Title/Popup] - Displays the DVD title menu
or BD-ROM’s popup menu, if available.
d [Option] - Displays playback information.
c Time – Elapsed playing time/total playback
time
e [Repeat] - Repeats a desired section or
sequence. (page 47)
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f [3D] - Adjusts the 3D setting. (page 51)
f Angle – Selected angle/total number of
angles
Operating
a Progress bar - Displays the current position
and total playing time.
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
LHB755W-FX.BARELLK_ENG.indd 45
2015-02-05 �� 3:16:13
46 Operating
,,Note
Setting the slide show option
yy If no button is pressed for a few seconds,
the on-screen display disappears.
You can use various options during viewing a
photo in full screen.
yy A title number cannot be selected on some
discs.
1. While viewing pictures, press INFO/MENU (m).
yy Available items may differ depending on
discs or titles.
2. Select an [Option] using A/D, and press
ENTER (b)
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
To control photo view
i
Controls playback and sets options while viewing
pictures in full screen.
4
a [Speed] - Use A/D to select a delaying
speed between photos in a slide show.
While viewing pictures, press INFO/MENU (m).
b [Effect] - Use A/D to select a transition
effect between photos in a slide show.
Operating
You can control playback and set options while
viewing pictures in full screen.
c [Music Select] – Select the background music
for the slide show (page 51).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show (page 51).
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
LHB755W-FX.BARELLK_ENG.indd 46
2015-02-05 �� 3:16:13
Operating 47
Advanced Playback
Repeating a specific portion
eroy
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
During playback, press REPEAT (h) to select a
desired repeat mode.
A-B – Selected portion will be repeated continually.
Chapter – The current chapter will be played back
repeatedly. (BD / DVD only)
Title – The current title will be played back
repeatedly.
All – All the titles or files will be played back
repeatedly. (Movie file only)
Off – Returns to normal playback.
Audio CDs/Audio files
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
All – All the tracks or files will be played back
repeatedly.
All – All the tracks or files will be played
back repeatedly in random order.
– The tracks or files will be played back in
random order.
To return to normal playback, press CLEAR.
,,Note
This function may not work on some disc or
title.
LHB755W-FX.BARELLK_ENG.indd 47
2. Select [A-B] and press ENTER (b).
3.Press ENTER (b) at the beginning of the portion
you wish to repeat.
4.Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
5. To return to normal playback, press CLEAR.
,,Note
yy You cannot select a portion less than 3
seconds.
yy This function may not work on some disc or
title.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
4
Operating
To return to normal playback, press CLEAR.
1. During playback, press REPEAT (h).
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
4.Press ENTER (b) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending
on the file type and ability of the DLNAcompatible digital media server.
2015-02-05 �� 3:16:13
48 Operating
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [Subtitle] option.
4.Use A/D to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change subtitle
selections only via the disc menu. If this is
the case, press TITLE/POPUP or DISC MENU
button and choose the appropriate subtitle
from the selections on the disc menu.
4
Operating
yy You can select the [Subtitle] option on
the On-Screen display directly by pressing
SUBTITLE button.
Hearing a different audio
eroy
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
yy You can select the [Audio] option on the
On-Screen display directly by pressing
AUDIO button.
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/MENU (m).
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [Angle] option.
3.Use W/S to select the [Audio] option.
4.Use A/D to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
4.Use A/D to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [TV Aspect Ratio]
option.
4.Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
LHB755W-FX.BARELLK_ENG.indd 48
2015-02-05 �� 3:16:13
Operating 49
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
Changing subtitle Code Page
y
2. Select an [Option] using A/D, and press
ENTER (b)
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
4.Use A/D to select desired option.
1. During playback, press INFO/MENU (m).
Setting the [User setting] option
2. Select an [Option] using A/D, and press
ENTER (b)
1. During playback, press INFO/MENU (m).
3.Use W/S to select the [Picture Mode] option.
5. Press BACK (1) to exit the On-Screen display.
3.Use W/S to select the [Code Page] option.
2. Select an [Option] using A/D, and press
ENTER (b)
4.Use A/D to select desired code option.
3.Use W/S to select the [Picture Mode] option.
4.Use A/D to select the [User setting] option,
and press ENTER (b).
4
Operating
5. Press BACK (1) to exit the On-Screen display.
5.Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
6.Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
LHB755W-FX.BARELLK_ENG.indd 49
2015-02-05 �� 3:16:13
50 Operating
Viewing content information
y
Selecting a subtitle file
y
The player can display the content information.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m). The file information
appears on the screen.
During video playback, you can display the file
information by pressing TITLE/POPUP.
1.Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2.Press ENTER (b).
,,Note
The information displayed on the screen may
not be correct comparing actual content
information.
Changing content list view
yui
4
Operating
In the [Movie], [Photo] or [Music] menu, you can
change the content list view.
Press red (R) colored button repeatedly.
LHB755W-FX.BARELLK_ENG.indd 50
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
,,Note
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.
2015-02-05 �� 3:16:14
Operating
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press
ENTER (b).
3.Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
4.Use W/S to select a device, and press ENTER
(b).
51
Playing file encoded in 3D
y
This function allows you to play 3D content in case
of file encoded in 3D.
1. During playback, press INFO/MENU (m).
2. Select a [3D], and press ENTER (b).
3. Select suitable mode (side by side, top and
bottom) which is same way as file encoded in
3D by using W/S/A/D.
,,Note
If the subtitle is displayed abnormally, set the
TV’s 3D option to off and the unit’s 3D option
to on.
Available device may differ depending on the
location of the current photo file.
Photo location
Available Device
Disc, USB
Disc, USB
MTP
Media server
5.Use W/S to select a file or a folder you wish to
play.
Operating
MTP
Media server
4
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting audio file from a server, folder
selection is not available. Only file selection is
available.
6.Use D to select [OK], and press ENTER (b) to
complete music selection.
LHB755W-FX.BARELLK_ENG.indd 51
2015-02-05 �� 3:16:14
52 Operating
Advanced Features
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
1. Check the network connection and settings
(page 20).
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
4
3.Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu
(page 27).
Operating
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes” or “Google Android Market (Google
Play Store)” for detailed information of “LG AV
Remote”.
Private Sound Mode
By downloading “LG AV Remote” application on
your smart phone or tablet, you can connect your
headsets, and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information,
please refer to “LG AV Remote” application.
,,Note
yy When you use the unit with MUSIC flow,
private sound mode is unavailable.
yy Not all modes support sound privacy and
pairing multiple devices is not available.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device
while content is being downloaded or a
Blu-ray disc is still in the disc tray. Doing so
may damage the connected USB device and
BD-Live features may not operate properly
with the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
LHB755W-FX.BARELLK_ENG.indd 52
2015-02-05 �� 3:16:14
Operating 53
,,Note
Audio CD recording
You can record one desired track or all of the tracks
in Audio CD to an USB storage device.
1. Insert an USB storage device to the USB port on
the front panel.
2. Insert an Audio CD into the player.
The playback starts automatically.
3. Press (X) REC button to start [CD Recording].
Stop mode
During
playback
Recording
track
All of the tracks
playing track
Recording
time
4X speed
normal speed
Recording from FM radio or
AUX source
1. Insert an USB storage device to the USB port on
the front panel.
2. In FM radio mode, tune to the desired radio
station (See “Radio Operations” on page 54) or
in AUX mode, start playback from the external
source (See “AUX Connection” on page 18).
3. Press (X) REC button on the remote control.
-- The recording is saved as a file in “EXT_REC”
folder.
yy Audio track is recorded to an audio file with
192 kbps. FM radio and AUX source are
recorded to an audio file with 128 kbps.
yy Audio CD recording time in the table is
approximate.
yy Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
yy Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
yy The length of the recording source should
be longer than 20 seconds for the proper
recording.
yy Do not turn off this player or extract the
connected USB storage device during the
recording.
yy During Audio CD recording, it is unavailable
to use MUSIC flow.
>>Caution
4
Operating
You can record from FM radio or AUX source to an
USB storage device.
yy For recording, use the USB flash drive /
external HDD formatted in FAT32 only.
The recording or copying features on this
player are provided for your personal and
non-commercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
Be Responsible
Respect Copyrights
LHB755W-FX.BARELLK_ENG.indd 53
2015-02-05 �� 3:16:14
54 Operating
Radio Operations
Be sure that the antenna is connected.
(Refer to the page 17)
Listening to the radio
1. Press FUNCTION until TUNER (FM) appears in
the display window. The last received station is
tuned in.
4
Deleting a saved station
1. Press PRESET (- / +) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Deleting all the saved stations
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change. Scanning stops when the unit tunes in
a station. Or Press TUNING (-/+) repeatedly.
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again. Then all
the saved stations are deleted.
3. Adjust the volume by rotating the volume
control knob on the front panel or by pressing
VOL (+/-) on the remote control.
Improving poor FM reception
Presetting the Radio Stations
Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
Operating
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until the TUNER (FM) appears
in the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press ENTER (b) a preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press ENTER (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
LHB755W-FX.BARELLK_ENG.indd 54
2015-02-05 �� 3:16:14
Operating 55
Using the Premium
You can use various content services via Internet
with the Premium feature.
1. Check the network connection and settings
(page 20).
2.Press HOME ( ).
3. Select the [Premium] using A/D, and press
ENTER (b).
4. Select an online service using W/S/A/D,
and press ENTER (b).
,,Note
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most upto-date information.
4
Operating
yy For detailed information of each service,
contact the content provider or visit support
link of the service.
yy Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
yy For the first time to access [Premium],
current country setting appears.
yy If you want to change the country setting,
go to [Settings] > [NETWORK] > [Smart
Service Setting] > [Country Setting]. Select
[Manual] and press ENTER (b) on [Country
Setting] menu.
yy When changing the sound effect, the audio
output may be delayed depending on your
internet environment.
LHB755W-FX.BARELLK_ENG.indd 55
2015-02-05 �� 3:16:14
56 Operating
Enjoying with LG
Multi-room Audio (LG
Music Flow)
4
,,Note
yy If you use this unit with MUSIC flow, at least
one unit should be connected by LAN
cable. For more detail for use with MUSIC
flow, refer to the MUSIC flow’s user manual.
Operating
tu
yy It is recommended to connect up to 4
speakers for smooth playback.
LG smart Hi-Fi audio system MUSIC flow allows you
to enjoy music with several speakers wirelessly.
yy Signal interference may cause the playback
to stop.
Using MUSIC flow, you can enjoy audio contents
being played by this unit with high quality.
yy If playback doesn’t work smoothly, the
connection may be broken automatically.
1. Check the network connection and settings
(page 20). The player and speakers must be
connected to the same network.
yy When you perform private sound mode,
this function is unavailable.
2. During music playback, press green (G) colored
button. Select speakers using W/S and ENTER
(b). You can check multiple MUSIC flows
you are listening to. To change MUSIC flow’s
channel, press D during the checked speaker is
highlighted and select the output option using
W/S and ENTER (b).
yy If you press BACK (1) to go back to file
browser during playback with MUSIC flow,
MUSIC flow stops playback.
yy If your MUSIC flow is not displayed on the
list, reset network setting on the setting
menu.
yy You cannot control the volume level of
MUSIC flow speaker with this unit’s volume
control buttons or volume control knob.
If you select [Mute Blu-ray Disc™ Home Theater.],
you can listen using only MUSIC flow.
3. Select [OK], and press ENTER (b) to complete
speaker selection.
LHB755W-FX.BARELLK_ENG.indd 56
2015-02-05 �� 3:16:14
Operating 57
Using BLUETOOTH®
wireless technology
About BLUETOOTH
Bluetooth is wireless communication technology
for short range connection.
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the Bluetooth in the other rooms.)
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA
BLUETOOTH Profiles
A2DP (Advanced Audio Distribution Profile)
Pairing your unit and BLUETOOTH
device
Before you start the pairing procedure, make sure
the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
FUNCTION.
Appears “BT READY” in display window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG HTS(XX:XX)”.
3. When this unit is successfully paired with your
Bluetooth device, Bluetooth LED of this unit
lights up and “PAIRED” appears in the display
window.
,,Note
4
Operating
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
Listening to music stored on
the BLUETOOTH devices
Depending on the Bluetooth device type,
some devices may have a different pairing
process.
4. Listen to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide.
,,Note
If you change the function of the unit, the
Bluetooth function is disconnected, operate
pairing again.
LHB755W-FX.BARELLK_ENG.indd 57
2015-02-05 �� 3:16:14
58 Operating
,,Note
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
yy Pairing is limited to one Bluetooth device
per unit and multi-pairing is not supported.
yy If there are obstacles between your
Bluetooth device and the set, your
Bluetooth device cannot be connected.
yy Depending on the type of the device, you
may not be able to use the Bluetooth
function.
yy When not connected the Bluetooth, “BT
READY” appears on the display window.
4
Operating
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower the connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit.
LHB755W-FX.BARELLK_ENG.indd 58
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details
of LG Sound Sync.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
yy When the connection fails, make sure of the
condition of the TV and power.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turn off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy This unit cannot support LG Sound Sync
(Optical) by the optical connection.
2015-02-05 �� 3:16:14
Operating 59
1. Turn on the unit by pressing 1 (Power) on the
remote control.
2. Select LG TV function by using FUNCTION on
the remote control or F on the unit until the
function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if connecting normally
between this unit and your TV.
,,Note
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
yy Details of TV setting menu vary depending
on the models of your TV.
LHB755W-FX.BARELLK_ENG.indd 59
Operating
yy The device with Bluetooth wireless
technology will be disconnected, if Sound
Sync function is selected.
4
2015-02-05 �� 3:16:14
5Troubleshooting
60 Troubleshooting
Troubleshooting
General
Symptom
Cause & Solution
The unit does not work
properly.
yy Turn off the power of this unit and the connected external device
(TV, Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
device (TV, Woofer, DVD-player, Amplifier, etc.) and then try
connecting again.
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Place the disc with the playback side down.
yy Place the disc on the disc tray correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
5
yy If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
Troubleshooting
yy An USB device which requires additional program installation when
you have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play video, photo or
audio files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the video file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
LHB755W-FX.BARELLK_ENG.indd 60
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
2015-02-05 �� 3:16:14
Troubleshooting
61
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (page 20).
yy Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed yy The firewall or anti-virus software on your media server is running.
on the device list.
Turn off the firewall or anti-virus software running on your media
server.
yy The player is not connected to the local area network that your media
server is connected.
yy The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
Access point is not displayed
on the “Access point name” list.
yy The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
yy Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
LHB755W-FX.BARELLK_ENG.indd 61
5
Troubleshooting
Cannot connect the player to
the access point or wireless
LAN router.
2015-02-05 �� 3:16:14
62 Troubleshooting
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
yy You are playing a disc recorded in a colour system that is different
from your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off ].
Set the option to [On].
5
Sound
Troubleshooting
Symptom
Cause & Solution
There is no sound or the sound
is distorted.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
yy Check the speaker cable connection. (page 13)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
LHB755W-FX.BARELLK_ENG.indd 62
2015-02-05 �� 3:16:15
Appendix 63
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
You can
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV
,,Note
LHB755W-FX.BARELLK_ENG.indd 63
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
6
Appendix
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Setting up the remote to
control your TV
2015-02-05 �� 3:16:15
64 Appendix
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2.Use A/D to select a desired option and then
press ENTER (b).
Software update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 20).
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
6
[OK]
Starts the software update.
Appendix
[Cancel]
Exits the update menu and the
home appears.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
LHB755W-FX.BARELLK_ENG.indd 64
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found. The current set is the
latest version.” appears. Press ENTER (b) to
return to the [Home Menu].
2015-02-05 �� 3:16:15
Appendix 65
4. If newer version exists, the message “A new
update was found. The update takes a few
minutes. Do you want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. To update software the next time, the software
update procedure has to be started from the
beginning again.
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
8. When update is completed, the power will be
turned off automatically in a few seconds.
9. Turn the power back on. The system now
operates with the new version.
,,Note
LHB755W-FX.BARELLK_ENG.indd 65
6
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
62.
2015-02-05 �� 3:16:15
66 Appendix
Additional Information
File requirement
Video files
File
Location
Disc,
USB
DLNA
File
Extension
Audio
Format
Codec Format
Subtitle
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS, MP3,
WMA,
AAC, AC3
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub),
SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.3gp”, “.mov”,
“.mpe”, “.m1v”, “.m2v”,
”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS, MP3,
WMA,
AAC, AC3
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.
txt), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Audio files
6
File
Location
File
Extension
Appendix
Sampling Frequency
Bitrate
Note
Disc,
USB
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”,
“.aiff”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
DLNA
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”,
“.mpo”, “.jps”
LHB755W-FX.BARELLK_ENG.indd 66
Recommended
Size
Note
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
2015-02-05 �� 3:16:15
Appendix 67
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
yy File compatibility may differ depending on
the server.
yy Depending on the types of file or ways of
recording, it may not play back.
yy Because the compatibility on DLNA server
are tested on the SmartShare environment,
file requirements and playback functions
may differ depending on media servers.
yy A disc which was recorded by multi-session
on normal PC is not supported on this
player.
yy The file requirements on page 66 are not
always compatible. There may have some
restrictions by file features and media
server’s ability.
yy To be playback a video file, video file name
and Subtitle file name must be the same.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy Playing video subtitle files are only available
on a media server created by SmartShare PC
software downloaded from website.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy Video / Audio codec compatibility may
differ depending on video file.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not be played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
6
Appendix
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
AVCHD (Advanced Video
Codec High Definition)
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
LHB755W-FX.BARELLK_ENG.indd 67
2015-02-05 �� 3:16:15
68 Appendix
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Certain system requirements
For high definition video playback:
yy High definition display that has HDMI input jack.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-inpicture function. For the playback method, refer
to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 5.1 channels if you
use HDMI connection for the audio output of the
unit.
yy You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
6
Appendix
LHB755W-FX.BARELLK_ENG.indd 68
2015-02-05 �� 3:16:15
Appendix 69
Audio Output Specifications
Jack/Setting
Source
HDMI OUT
PCM
DTS Re-encode *3
Auto *1 *2
Dolby Digital
PCM 5.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 5.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 5.1ch
DTS
Dolby TrueHD
DTS
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 5.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Auto]. (Except LPCM
Codec : the output always include interactive
and secondary audio.)
*2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [Auto].
LHB755W-FX.BARELLK_ENG.indd 69
yy With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not
be heard if the [Digital Output] option is set to
[Auto].
yy If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
yy Multi-channel Digital Surround Sound via
digital connection can only be obtained if your
receiver is equipped with a Digital Multi-channel
decoder.
yy This setting is not available on the input signal
from an external device.
6
Appendix
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
yy The audio is outputted up to PCM 48 kHz/16 bit
for MP3/WMA file and PCM 44.1kHz/16 bit for
Audio CD during playback.
2015-02-05 �� 3:16:15
70 Appendix
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
6
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Appendix
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
LHB755W-FX.BARELLK_ENG.indd 70
LY Russian
LU Federation Vietnam RU Zimbabwe SA
TH
VN
ZW
SN
2015-02-05 �� 3:16:15
Appendix
71
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
6
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Appendix
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
LHB755W-FX.BARELLK_ENG.indd 71
2015-02-05 �� 3:16:15
72 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, & DTS and the
Symbol together are registered trademarks, and
DTS-HD Master Audio | Essential is a trademark of
DTS, Inc. © DTS, Inc. All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
Java is a trademark of Oracle and/or its affiliates.
6
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
“x.v.Color” is a trademark of Sony Corporation.
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
LHB755W-FX.BARELLK_ENG.indd 72
2015-02-05 �� 3:16:16
Appendix 73
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2013
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix
LHB755W-FX.BARELLK_ENG.indd 73
2015-02-05 �� 3:16:16
74 Appendix
Specifications
General
Power requirements
Power consumption
Refer to main label on the bottom panel.
Refer to main label on the bottom panel.
Networked standby : 0.5 W (If all network ports are activated.)
Dimensions (W x H x D)
Approx. 410 mm x 55 mm X 260 mm
Net Weight (Approx.)
2.7 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs/Outputs
HDMI IN/OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
ANALOG AUDIO IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL)
3 V (p-p), Optical jack x 1
MIC IN
6.3 mm jack
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
Power output (4 Ω/ 3 Ω), (RMS), THD 10 %
6
Appendix
Total
1200 W
Front
194 W x 2
Center
194 W
Rear
194 W x 2
Sub-Woofer
230 W (Passive)
System
Laser
Semiconductor laser
wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Wireless LAN (internal antenna)
Integrated IEEE 802.11b/g/n (2.4 GHz bands) wireless networking
access
Bus Power Supply (USB)
5 V 0 500 mA
LHB755W-FX.BARELLK_ENG.indd 74
2015-02-05 �� 3:16:16
Appendix 75
Speakers
Front speaker (Left/ Right)
Type
Impedance
2 Way 3 speaker
Max. Input power
388 W
4Ω
Net Dimensions
(W x H x D)
290 mm X 1150 mm X 290 mm
Net Weight
4.2 kg
2 Way 3 speaker
Max. Input power
388 W
4Ω
Net Dimensions
(W x H x D)
290 mm X 1150 mm X 290 mm
Net Weight
4.2 kg
2 Way 3 speaker
Max. Input power
388 W
4Ω
Net Dimensions
(W x H x D)
342.5 mm X 86 mm X 87 mm
Net Weight
1 kg
1 Way 1 speaker
Max. Input power
460 W
3Ω
Net Dimensions
(W x H x D)
191 mm X 388.5 mm X 318 mm
Net Weight
5.2 kg
Rated Input Power 194 W
Rear speaker (Left/ Right)
Type
Impedance
Rated Input Power 194 W
Center speaker
Type
Impedance
Rated Input Power 194 W
Subwoofer
Type
Impedance
Rated Input Power 230 W
Wireless receiver (W5-2)
Refer to main label on the wireless receiver.
Power consumption
Refer to main label on the wireless receiver.
Dimensions (W x H x D)
60 mm X 220 mm X 175 mm
Net Weight (Approx.)
0.9 kg
yy Design and specifications are subject to change without notice.
LHB755W-FX.BARELLK_ENG.indd 75
6
Appendix
Power requirements
2015-02-05 �� 3:16:16
76 Appendix
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
LHB755W-FX.BARELLK_ENG.indd 76
2015-02-05 �� 3:16:16
Appendix 77
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
LHB755W-FX.BARELLK_ENG.indd 77
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
2015-02-05 �� 3:16:16
LHB755W-FX.BARELLK_ENG.indd 78
2015-02-05 �� 3:16:16
Download PDF