LG | OM5560 | LG OM5560 Owner’s Manual

OWNER’S MANUAL
Mini Hi-Fi
Audio
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
OM5560
*MFL68962868*
www.lg.com
Copyright © 2017 LG Electronics. All Rights Reserved
Getting Started
3
Safety Information
CAUTION
1
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure. To prevent
direct exposure to laser beam, do not try to open the
enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Getting Started
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
1
Getting Started
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order
than the assembly. To prevent contamination of
the environment and bring on possible threat
to human and animal health, the old battery or
the battery put it in the appropriate container at
designated collection points. Do not dispose of
batteries or battery together with other waste. It is
recommended that you use local, free reimbursement
systems batteries and accumulators. The battery
shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Note: Do not look directly at the light emitting part
when the LIGHTING is turned on.
If the illumination brightness is glaring, switch on the
room lights or turn off the LIGHTING of the unit.
Getting Started
5
Symbols
~
Refers to alternating current(AC).
0
Refers to direct current(DC).
1
Refers to class II equipment.
Getting Started
1
Refers to stand-by.
!
Refers to “ON” (power).
Refers to dangerous voltage.
6
Table of Contents
Table of Contents
1
Getting Started
3
8
8
8
9
9
10
12
14
Safety Information
Unique Features
Playable file Requirement
– Music file requirement
– Compatible USB Devices
– USB device requirement
Remote control
Top panel
Front panel / Rear panel
2Connecting
15
15
15
15
16
17
17
AC Power Cord Connection
Optional Equipment Connection
– AUX IN Connection
– AUX OUT Connection
– PORT. IN Connection
– USB Connection
– Antenna Connection
3Operating
18
18
19
19
20
20
20
20
21
21
22
22
Basic Operations
– CD/USB Operations
– Auto Play
– Selecting a folder and an MP3/WMA file
– Deleting an MP3/WMA file
Playback Effect
– DJ EFFECT
– SCRATCH Effect
– AUTO DJ
– DJ PRO
Using BLUETOOTH® wireless technology
– Listening to music stored on the Bluetooth
devices
24 Using the Music Flow Bluetooth App
24 – About “Music Flow Bluetooth” App
24 – Install “Music Flow Bluetooth” App onto
Your Bluetooth Device
25 – Activate Bluetooth with “Music Flow
Bluetooth” App
26 Radio Operations
26 – Listening to the radio
26 – Improving poor FM reception
26 – Presetting the Radio Stations
26 – Deleting all the saved stations
27 – Seeing information about a Radio station
28 Sound adjustment
28 – Setting the sound mode
28 – Setting the USER EQ
29 Advanced Operations
29 – Recording to USB
31 – JUKE BOX Playback
32 Other Operations
32 – Turn off the sound temporarily
32 – CHILDSAFE Mode
32 – Displaying file information (ID3 TAG)
32 – DEMO
32 – Using Microphone
33 – VOICE CANCELLER
33 – KEY CHANGER
33 – LIGHTING effect
33 – PARTY THRUSTER
34 Setting the Clock
34 – Setting the Clock through “Music Flow
Bluetooth” App
34 – Using your player as an alarm clock
Table of Contents
35
35
35
36
36
37
38
– Sleep Timer Setting
– Dimmer
Auto power down
– AUTO POWER On
– Auto function change
LG Sound Sync
WIRELESS PARTY LINK Connection
4Troubleshooting
7
1
2
39 Troubleshooting
39 – General
5Appendix
41
42
43
43
43
General specifications
Trademarks and Licenses
Maintenance
– Notes on Discs
– Handling the Unit
3
4
5
8
Getting Started
Unique Features
1
Bluetooth®
Getting Started
Listens to music stored on your Bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
Playable file
Requirement
Music file requirement
MP3/WMA file compatibility with this unit is limited
as follows.
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
yy Maximum files : Data CD : 999 / USB : 2,000
yy Maximum folders : Data CD : 99 / USB : 200
yy File extensions : “.mp3”/ “.wma”
Music Flow Bluetooth
yy Certain MP3/WMA files may not be played
depending on the type or format of the file.
Music Flow Bluetooth is an App designed to let you
take control of some of LG’s latest Audio devices.
Refer to page 24.
yy We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
yy CD-ROM file format : ISO 9660/ JOLIET
The DTS is not supported. In case of DTS audio
format, audio is not output.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Getting Started
9
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
yy USB Flash Drive :
Devices that support USB2.0 or USB1.1.
USB device requirement
yy Devices which require additional program
installation when you have connected it to a
computer, are not supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than a
few minute to be searched.
yy To prevent data loss, back up all data.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
yy Using NTFS file system is not supported. (Only
FAT(16/ 32) file system is supported.)
yy This unit recognizes up to 2,000 files.
yy External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
yy USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
1
Getting Started
yy The USB function of this unit does not support all
USB devices.
10 Getting Started
Remote control
• • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby/On) : Switches the unit ON or OFF.
B (Open/Close) : Opens and closes the disc tray.
VOL (Volume) +/- : Adjusts speaker volume.
1
Getting Started
F (Function) : Selects the function and input source.
(Mute): Mutes the sound.
PRESET·FOLDER W/S :
-- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESET·FOLDER
W/S to select the folder you want to play.
-- Chooses a preset number for a radio station.
JUKEBOX/MEMORY :
-- Stores radio stations.
-- Deletes all the saved stations.
-- Selects JUKE BOX mode.
-- Makes your favorites list.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to page 21)
DELETE :
-- Deletes MP3/WMA files. (USB only).
-- Deletes a song on the programmed list.
Replacement of battery
(R03
)
(R03)
Remove the battery cover on the rear of the remote
control, and insert the battery with 4 and 5
matched correctly.
Getting Started 11
• • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your tracks/files repeatedly or
randomly.
0 to 9 numerical buttons : Selects numbered tracks,
files, or preset number.
TUNING-/+ : Selects the radio stations.
CLOCK : Sets a clock and checks a time.
C/V (Skip/Search) :
-- Skips Fast backward or Forward.
ALARM : With the ALARM function you can turn CD,
USB play and Tuner reception on at a desired time.
-- Searches for a section within a track/file.
• • • • • • • • • • • • • • d• • • • • • • • • • • • • •
d/M (Play/Pause) :
VOICE CANCELLER : You can enjoy the function
while playing the music, by reducing singer vocal of
music in the various source.
-- Starts or pauses playback.
-- Selects STEREO/MONO.
Z (Stop) :
-- Stops playback or recording.
-- Cancels DELETE function.
SOUND EFFECT : Chooses sound impressions.
REGION EQ : Chooses region equalizer.
INFO / SLEEP
-- Sees informations about your music. An MP3 file
often come with ID3 tag. The tag gives the Title,
Artist, Album or Time information.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- In status of WIRELESS PARTY LINK Connection,
device name of SLAVE unit appears in the
MASTER unit and Device name of MASTER unit
appears in the SLAVE unit.
-- Press and hold to set the system to turn off
automatically at a specified time.
(Dimmer : The display window will be darkened
by half.)
DJ EFFECT : Selects DJ EFFECT mode. (Refer to
page 20)
RDS/SET :
-- RDS (Radio Data System)
-- Confirms the setting.
KEY CHANGER ( / ) : Changes the key to suit
your vocal range.
DJ LEVEL +/- : Adjusts the level of DJ EFFECT sound.
PTY : Searches radio stations by radio type.
USB REC : USB direct recording.
1
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • •
12 Getting Started
Top panel
1
Getting Started
o
a
b
n
m
c
l
d
k
e
j
f
i
g
h
Getting Started 13
aUSB 1 Port
You can play or record sound files by connecting
the USB device.
b1/!(Standby/On)
dVOICE CANCELLER
- You can enjoy the function while playing the
music, by reducing singer vocal of music in the
various source.
Press to switch this mode on or off.
KEY CHANGER (b/#)
Changes the key to suit your vocal range.
LIGHTING / PARTY LINK
- Turns on/off the lighting effects.
- Press and hold to select the PARTY LINK.
eSCRATCH / LEVEL / SYNC SET
Turn clockwise or counterclockwise to make
Scratch sound. / Adjust DJ EFFECT level. / Sets
Delay value in PARTY LINK mode.
f DJ EFFECT
Selects DJ EFFECT mode. (For more information
refer to page 20).
USER EQ
Selects the sound effect created by your own.
gPARTY THRUSTER
Slide the lever to create a party atmosphere.
hCLUB, DRUM, USER (DJ PRO)
Selects CLUB, DRUM or USER sound effect to
mix.
1, 2, 3 (DJ PRO PAD)
Press a desired sound pad.
OK
Selects a folder when searching a file.
jY , U & SEARCH (Skip/Search)
- Searches a folder or a file.
- Searches for a section within a track/file.
- Selects the radio stations.
kT (Play/Pause)
- Starts or pauses playback.
- Selects Stereo/Mono.
I (Stop) / RDS
- Stops playback or cancels DELETE function.
- Radio Data System
R (Open/Close)
Opens and closes the disc tray.
REGION EQ / BASS BLAST
- Chooses region equalizer.
- Press and hold to select BASS effect directly.
lVOL. (Volume)
Adjusts speaker volume.
mUSB REC / DEMO
Records to USB. / Shows Demo mode.
F (Function) / WIRELESS LINK
- Selects the function and input source.
- Press and hold for 3 seconds to select
WIRELESS PARTY LINK mode.
nUSB 2 Port
You can play or record sound files by connecting
the USB device.
oDisplay window
1
Getting Started
cMIC. (Microphone)
Controls microphone’s volume.
iSEARCH
Moves to folder or file in selection mode.
14 Getting Started
Front panel / Rear panel
1
aDisc tray
Getting Started
bMIC 1 / 2 jack
OUT
IN
cPORT. IN
d
Remote sensor
a
b
e
f
eANTENNA (FM)
c
d
fAUX IN / OUT
gAC in socket
>>Caution
yy Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V / 15 A
or 230 V / 15 A, otherwise the unit may
not operate properly because of the lack of
power supply.
yy Do not overload thegextension cord with
excessive electrical load.
OUT
IN
e
f
g
Connecting 15
AC Power Cord
Connection
1. Connect one end of the AC power cord (included)
to the AC IN socket.
OUT
OUT
IN
IN
Red
White
Audio cable
2
Connecting
2. Plug the other end into the wall outlet.
,,Note
Unplug the AC power cord from the wall outlet
if you do not to use for an extended period of
time.
DVD, Blu-ray player etc.
AUX OUT Connection
Connect an input of auxiliary device to the AUX OUT
(L/R) connector.
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
If your device has only one input for audio(mono),
connect it to the left audio jack on the unit.
OUT
OUT
Audio cable
IN
IN
16 Connecting
PARTY LINK
PORT. IN Connection
You can connect two units to play music together.
Connect an output (earphone or line out) of portable
device (MP3 or PMP etc) to the PORT. IN connector.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
2
1. Connect AUX OUT connector on a unit to the
AUX IN connector on the other unit using Audio
cable.
Connecting
2. Press and hold LIGHTING / PARTY LINK on the
unit for 3 seconds connected through AUX OUT
and then select LINK ON.
“LINK ON” appears in the display window and
change to “DELAY time” soon.
Portable cable
3. Rotate SCRATCH / LEVEL / SYNC SET to adjust
Delay setting.
When “LINK ON” and “DELAY time” are displayed
in the display window, you can adjust the delay
time.
4.Press LIGHTING / PARTY LINK to save the
Delay setting.
,,Note
yy This function is not available on LG TV
function.
yy The initial Delay is 30 ms. If you want to
change the Delay time, Rotate SCRATCH /
LEVEL / SYNC SET. The connected device’s
Delay may differ. If Audio Sync is not matched,
adjust Delay of PARTY LINK to synchronize
sound.
yy It is available to adjust the Delay from 0
ms to 200 ms. Synchronizing tempo is not
available depending on devices.
yy Delay value is saved and PARTY LINK is
turned off when the unit turns off.
yy You can select LINK ON/LINK OFF mode by
pressing and holding LIGHTING / PARTY
LINK for 3 seconds on the unit.
MP3 player etc.
Listening to music from your portable
player or external device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing 1 on the remote
control or 1/! on the unit.
3.Press F on the remote control or F / WIRELESS
LINK on the unit to select AUX or PORTABLE
Function.
4. Turn on the portable player or external device and
start it playing.
,,Note
Automatically switches to the PORTABEL
function when you connect the portable device
to the PORT. IN connector.
Connecting 17
USB Connection
Antenna Connection
Connect a USB device (or MP3 player, etc.) to the
USB ports on the unit.
Connect the supplied FM antenna for listening to
the radio.
USB device
Connect the FM wire antenna to the FM antenna
connector.
FM antenna
OUT
IN
2
Connecting
,,Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press Z on the remote control or I on
the unit twice in a row.
2. Remove the USB device from the unit.
,,Note
Be sure to fully extend the FM wire antenna.
18 Operating
Basic Operations
To
Press C/V on the
remote control or rotate
Y , U & SEARCH on the unit
to go to the next/previous track/file.
CD/USB Operations
1. Insert the disc by pressing B on the remote
control or R on the unit.
Or connect the USB device to the USB port.
2. Select CD or USB function by pressing F on the
remote control or F / WIRELESS LINK on the unit.
To
Stop
3
Do this
Press Z on the remote control or
I on the unit.
Operating
Playback
Press d/M on the remote control or
T on the unit.
Pause
Press d/M on the remote control or
T on the unit during playback.
-- During Playback,
(1) By using C/V buttons :
Skipping to
the next/
previous
track/file
Press SEARCH and then rotate
Y , U & SEARCH during
playback.
Selecting
a track/file
directly
Press 0 to 9 numerical buttons on
the remote control to go to the
desired file or track directly.
Press V on the remote control to
go to the next track/file.
Playing less than 2 seconds, press
C on the remote control to go to
the previous track/file.
Playing after 3 seconds, press C
on the remote control to go to the
beginning of the track/file.
(2) By using SEARCH :
Rotate Y , U & SEARCH on
the unit and press d/M to play the
track/ file.
- On the remote control
Press and hold C/V on the
remote control during playback and
Searching release it at the point you want to
for a section listen to.
within a track/
- On the unit
file
Do this
-- In stop status,
Playing
Press REPEAT on the remote
repeatedly or control repeatedly. Refer to the note
randomly for details about the display change.
,,Note
yy The display changes in the following order.
USB
MP3/WMA CD
AUDIO CD
RPT 1
RPT 1
RPT 1
RPT*DIR
RPT DIR
-
RPT ALL
RPT ALL
RPT ALL
RANDOM
RANDOM
RANDOM
OFF
OFF
OFF
*DIR : Directory
yy When you play JUKE BOX list, only RPT 1 and
RPT ALL are available.
yy Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it’s last been
played.
yy If you leave the disc tray open for 5 minutes,
it will close automatically.
Operating 19
Auto Play
-- AUDIO/MP3/WMA CD is played automatically
after Disc tray is open and then closed.
-- Automatically switches to the CD function if Disc
tray is open and then closed when there is no disc
in Disc tray.
,,Note
yy CD / USB Folders/Files are recognized as
below.
*
Selecting a folder and
an MP3/WMA file
On the unit
1.Press SEARCH and rotate Y , U & SEARCH
until a desired file appears in stop status. You can
also search a folder if you press SEARCH again.
3
Operating
2.Press OK or T to play the selected file. When
you search a folder, press OK to select a file in the
folder, then press OK or T again. The selected
file is played.
On the remote control
1.Press PRESET·FOLDER W/S on the remote
control repeatedly until a desired folder appears.
2.Press d/M to play it. The first file of folder will play
yy If there is no file in a folder, the folder will not
appear.
yy Folders will be presented as the following
order;
ROOT FOLDER 1 FOLDER 3
FOLDER 7 FOLDER 8 FOLDER 5
FOLDER 6
yy File will be played from $ file No.1 to $ file
No.14 one by one.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : The first screen you can see when a
computer recognize the USB is “ROOT”.
20 Operating
Deleting an MP3/WMA file
You can delete file, folder or format by pressing
DELETE. This function is supported only in stop
status. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by pressing
PRESET·FOLDER W/S on the remote control
and press DELETE.
-Press and hold DELETE to format the USB
device.
Or
3
Press DELETE repeatedly during selecting the
MP3/WMA file.
Operating
The display changes in the following order.
- DEL FILE : Deletes file
- DEL DIR : Deletes folder
- FORMAT : Formats USB
2. To delete file/folder or format, press d/M on the
remote control or press T on the unit.
If you want to exit the current mode, press Z on
the remote control or press I on the unit.
Playback Effect
The unit supports various sound and playback effects
: DJ EFFECT, SCRATCH, DJ PRO, AUTO DJ.
DJ EFFECT
It allows you to enjoy DJ EFFECT such as Flanger/
Phaser/Wah/Delay sound effect.
1. Press DJ EFFECT to select a desired DJ EFFECT
(FLANGER, PHASER, WAH, DELAY, OFF).
2. Turn SCRATCH / LEVEL / SYNC SET clockwise
or counterclockwise to adjust the DJ EFFECT level
between 0 to 15.
,,Note
yy The DJ EFFECT mode is displayed for 3
seconds when a DJ EFFECT Key is inputted.
yy The current gage level is displayed when
adjusting gage.
yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
is turned off.
>>Caution
yy Do not extract the USB device during
operation. (play, delete, etc.)
SCRATCH Effect
yy Regular back up is recommended to prevent
data loss.
You can output and mix the sound effects of the
SCRATCH.
yy The delete function may not be supported
according to the USB status. (lock, etc.)
Rotating SCRATCH / LEVEL / SYNC SET to mix the
scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
LEVEL / SYNC SET.
Operating 21
AUTO DJ
DJ PRO
Auto DJ blends the end of one song into the
beginning of another for seamless playback.
It equalizes volume across tracks/files for
uninterrupted playback.
It allows you to mix CLUB, DRUM or USER sound
effect. Each mode has up to 3 sounds effect.
Press AUTO DJ on the remote control repeatedly, the
display changes as followings. AUTO DJ RANDOM ->
AUTO DJ SEOUENTIAL -> AUTO DJ OFF
2. Press a DJ Pro. Pad (1, 2, 3) of desired sound.
Display
Window
Description
OFF
AUTO DJ OFF
-
RANDOM
AUTO DJ
RANDOM
The music is played
randomly on this
mode.
REPEAT
AUTO DJ
SEQUENTIAL
The music is played
repeatedly on this
mode.
,,Note
yy AUTO DJ mode does not support searching
for a section within a track/file or to play
repeatedly or randomly.
yy If you move to other functions or stop the
music using I on the unit (or Z on the
remote control) on AUTO DJ mode, AUTO DJ
will be disable.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy During recording, AUTO DJ is not available.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
,,Note
yy If you want to use USER, you have to register
a source with “Music Flow Bluetooth” app. If
the source is not register to USER, “EMPTY”
or “NO SOUND” appears on the display
window.
yy Initial DJ Pro mode is CLUB sound effect.
yy DJ Pro mode is displayed for 3 seconds when
you press DJ PRO (CLUB, DRUM or USER).
yy The DJ PRO sound is mixed when you press a
DJ Pro. Pad (1, 2, 3).
yy The currently playing DJ PRO sound is
stopped and the selected DJ PRO sound
outputs if you press a different DJ Pro. Pad
(1, 2, 3) while DJ PRO sound is playing.
3
Operating
Mode
1. Press and hold DJ PRO (CLUB, DRUM or USER)
to select a desired DJ PRO sound effect.
22 Operating
Using BLUETOOTH®
wireless technology
About Bluetooth
Bluetooth is wireless communication technology for
short range connection.
The sound may be interrupted when the connection
interfered by the other electronic wave or you
connect the Bluetooth in the other rooms.
3
Operating
Connecting individual devices under Bluetooth
wireless technology does not incur any charges. A
mobile phone with Bluetooth wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth wireless technology.
Available Devices : Mobile phone, MP3, Laptop, PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles. This
unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Codec : SBC
Listening to music stored on the
Bluetooth devices
Pairing your unit and Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is activated on your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed, it
does not need to be performed again.
1. Turn on the unit.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG OM5560(XX)”.
,,Note
yy XX means the last two digits of
Bluetooth address. For example, if your
unit has a Bluetooth address such as
9C:02:98:4A:F7:08, you will see “LG
OM5560(08)” on your Bluetooth device.
yy Depending on the Bluetooth device type,
some devices may have a different pairing
process. Enter the PIN code (0000) as
needed.
yy You can connect this unit with up to 3
Bluetooth devices simultaneously using the
same method as described above, only in the
Bluetooth function.
yy The multi pairing connection is only
supported on Android or iOS devices. (Multi
pairing connection may not be supported
depending on the connected device
specifications.)
yy Removable/detachable Bluetooth devices
(Ex: Dongle etc.) will not support multi
pairing.
3. When this unit is successfully connected with
your Bluetooth device, “PAIRED” appears on the
display window and change to Bluetooth device
name soon. Then “BT” will be appeared on the
display window.
,,Note
yy "PAIRED" will momentarily appear on the
display when you connect other devices for
multi pairing.
yy If the device name is unavailable, “_” will be
displayed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
Operating 23
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the unit
and the Bluetooth device as close as possible
and keep the distance.
However, it may not work well in certain
situations as described below :
-- There is a obstacle between the unit and
the Bluetooth device.
-- There is a device using same frequency
with Bluetooth® technology such as
a medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
Controls connected Bluetooth device
You can control connected Bluetooth device by the
unit; play, pause, stop, skip.
,,Note
yy Only Android OS and iOS is available to use
this function.
yy This function may not be supported
depending on the Bluetooth device, or
operated differently.
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
yy You may not control the Bluetooth device
with this unit.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the BT function, adjust the
volume to a proper level on the Bluetooth
device.
yy If it is not in the BT function, only one device
can be connected.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
3
Operating
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
,,Note
yy When this unit connected with multiple
Bluetooth devices, only one device which
you are playing keeps Bluetooth connection
when you change the function to the others.
24 Operating
Using the Music Flow
Bluetooth App
,,Note
yy Only Android OS is available to use “Music
Flow Bluetooth” app with this unit.
yy It is recommended to use the latest version
of app.
3
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device
has a scanning software application. If you
don’t have one, download one from “Google
Android Market (Google Play Store)”.
yy Depending on the area, QR code may not
work.
Operating
About “Music Flow Bluetooth”
App
Install “Music Flow Bluetooth” App
through “Google Android Market
(Google Play Store)”
“Music Flow Bluetooth” app brings a suite of new
features to this unit.
1. Tap the “Google Android Market (Google Play
Store)” icon.
To enjoy more features, you are recommended to
download and install free “Music Flow Bluetooth”
app.
2. In the search bar, type in the “Music Flow
Bluetooth” and search it.
Here is introduce a few of the many features of
“Music Flow Bluetooth” app.
Multi Juke box : Your entertainment increases three
fold when you connect up to 3 Bluetooth phones at
the same time. Play music from all three phone and
create a customized playlist from all the phones.
Sampler Creator : Record effects on your
smartphone and very simply sync them via Bluetooth
to the system. Be as creative as you can be.
Install “Music Flow Bluetooth”
App onto Your Bluetooth Device
There are two ways to install “Music Flow Bluetooth”
App onto Your Bluetooth Device.
Install “Music Flow Bluetooth” App
through QR code
1. Install “Music Flow Bluetooth” app through QR
code. Use the scanning software to scan the QR
code.
2. Tap an icon for installation.
3. Tap an icon for downloading.
3. In the search result list, find and tap “Music Flow
Bluetooth” to start downloading Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Google Android Market
(Google Play Store)”.
Operating 25
Activate Bluetooth with “Music
Flow Bluetooth” App
“Music Flow Bluetooth” app helps to connect your
Bluetooth device to this unit.
,,Note
yy “Music Flow Bluetooth” app will be available
in the software version as follow;
-- Android O/S : Ver 4.0.3 (or later)
2. Tap [Menu] and select the unit you want.
yy If you use “Music Flow Bluetooth” app for
operation, there would be some differences
between “Music Flow Bluetooth” app and
the supplied remote control. Use the supplied
remote control as necessary.
3. If you want to get more information to operate,
tap [Help] on the [Setting] menu.
yy Depending on the Bluetooth device, “Music
Flow Bluetooth” app may not work.
1. Tap “Music Flow Bluetooth” app icon on the home
screen to open “Music Flow Bluetooth” app, and
go to the main menu.
yy After connection of “Music Flow Bluetooth”
app, music may be output from your device. In
this case, try connecting procedure again.
yy When “Music Flow Bluetooth” app operates
abnormally, check your Bluetooth device and
the connection of “Music Flow Bluetooth” app
and then try to connect again.
yy Depending on the smart phone's operating
system, you have some differences for “Music
Flow Bluetooth” operation.
yy Check Bluetooth setting on your Bluetooth
device if “Music Flow Bluetooth” app
connection does not work well.
3
Operating
yy If you operate the other applications or
change the settings on your Bluetooth
device while using “Music Flow Bluetooth”
app, “Music Flow Bluetooth” app may operate
abnormally.
26 Operating
Radio Operations
Presetting the Radio Stations
Be sure that both FM aerials are connected. (Refer to
page 17)
Before tuning, make sure to turn down the volume.
Listening to the radio
1.Press F / WIRELESS LINK on the unit or F on
the remote control until FM appears in the display
window.
The last received station is tuned in.
3
Operating
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control for about two seconds until the frequency
indication starts to change, then release. Or press
SEARCH and then rotate Y , U & SEARCH
on the unit. Scanning stops when the unit tunes
in a station.
Or
Manual tuning :
Press TUNING-/+ on the remote control
repeatedly or rotate Y , U & SEARCH on
the unit.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Improving poor FM reception
Press T on the unit or d/M on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
You can preset 50 stations for FM.
1.Press F / WIRELESS LINK on the unit or F
on the remote control until FM appears in the
display window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or by rotating
Y , U & SEARCH on the unit.
3.Press JUKEBOX/MEMORY on the remote
control. A preset number will blink in the display
window.
4.Press PRESET·FOLDER W/S on the remote
control to select the preset number you want.
5.Press JUKEBOX/MEMORY on the remote
control. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET·FOLDER W/S or 0 to 9 numerical
buttons on the remote control.
Deleting all the saved stations
1. Press and hold JUKEBOX/MEMORY on the
remote control for two seconds.
“ERASEALL” will flash up on the unit display.
2.Press JUKEBOX/MEMORY on the remote
control to erase all the saved radio stations.
Operating 27
Seeing information about a
Radio station
The FM tuner is supplied with the RDS (Radio Data
System) facility. This shows information about the
radio station being listened to. Press RDS/SET on
the remote control repeatedly to cycle through the
various data types:
PS
(Programme Service Name)
The name of the channel will appear in
the display.
PTY
(Programme Type Recognition)
The programme type (e.g. Jazz or News)
will appear in the display.
(Radio Text)
A text message contains special
information from the broadcast station.
This text may scroll across the display.
CT
(Time controlled by the channel)
This shows the time as broadcast by the
station.
You can search the radio stations by programme type
by pressing RDS/SET on the remote control. The
display will show the last PTY in use. Press PTY one
or more times to select your preferred programme
type. Press and hold C/V. The tuner will
search automatically. When a station is found the
search will stop.
Operating
RT
3
28 Operating
Sound adjustment
Setting the sound mode
This system has a number of pre-set surround sound
fields. The displayed items for the Equalizer may be
different depending on sound sources and effects.
You can select a desired sound mode by using
SOUND EFFECT on the remote control.
On Display
3
BASS (BASS BLAST)
Operating
POP
CLASSIC
ROCK
JAZZ
Description
Reinforces the treble,
bass and surround
sound effect.
This program lends
an enthusiastic
atmosphere to the
sound, giving you the
feeling you are at an
actual rock, pop, jazz or
classic concert.
FOOT BALL
You can enjoy
the sound effect
FOOTBALL STADIUM.
STANDARD
You can enjoy
optimized sound.
You can select a desired sound mode by using
REGION EQ on the remote control.
On Display
Region
FUNK, REGUETON,
SAMBA, BANDA,
MERENGUE, AXE, Latin
SALSA, SERTANEJ, America
CUMBIA, TECNO BR,
FORRO
ARABIC
DANGDUT
Description
Optimized
sound effect
for the
Middle East music genre
prefered in
Indonesia
each region.
AFRO
Africa
INDIA
India
,,Note
By pressing and holding
REGION EQ / BASS BLAST for 3 seconds on
the unit you can directly select BASS (BASS
BLAST) effect.
Setting the USER EQ
You can adjust the sound level of Bass, Middle and
Treble as your preference.
1.Press USER EQ on the unit. “USER EQ” is
displayed.
2.Press USER EQ repeatedly until desired setting
appears in the display window.
3. Rotate SCRATCH / LEVEL / SYNC SET to adjust
the value.
Operating 29
Advanced Operations
To select recording bit rate and speed
Recording to USB
2. Press C/V on the remote control or rotate
Y , U & SEARCH on the unit to select a bit
rate.
You can record a various sound source to USB.
(CD, AUX, PORTABLE, Tuner, USB)
1. Press and hold USB REC / DEMO on the unit or
USB REC on the remote control for 3 seconds.
1. Connect the USB device to the unit.
3. Press USB REC / DEMO on the unit or USB REC
on the remote control to set.
2.Press F / WIRELESS LINK on the unit or F on
the remote control to select a Function you want
to record.
4.Press C/V on the remote control or rotate
Y , U & SEARCH on the unit to select a
desired recording speed. (AUDIO CD only)
3. Start the recording by pressing USB REC /
DEMO on the unit or USB REC on the remote
control.
- If you connect both USB1 and USB2, press USB
REC / DEMO on the unit or USB REC on the
remote control when USB1 or USB2 which you
want to record blinks in the display window.
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC / DEMO on the unit or USB REC
on the remote control to finish the setting.
USB Copying
You can copy audio files in USB 1 to USB 2.
1. Connect a USB device including desired sound
files to USB port (1) and select USB 1 Function.
2. Connect another USB device to USB port (2).
4. To stop recording, press I on the unit or Z on
the remote control.
3. Press USB REC / DEMO on the unit or USB REC
on the remote control to start recording.
Pausing recording
4. To stop recording, press I on the unit or Z on
the remote control.
During recording, press T on the unit or d/M on
the remote control to pause recording. Press it again
to restart recording.
(Tuner/AUX/PORTABLE only)
,,Note
yy VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
yy VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
3
Operating
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
JUKE BOX list recording - After showing the JUKE
BOX list, you can record it to USB.
(Refer to page 31)
30 Operating
,,Note
yy You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/ WMA file or
Audio CD Only)
yy During recording MP3/WMA, there is no sound.
yy For stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
3
,,Note
yy You can record various sound using DJ
EFFECT, SCRATCH, DJ PRO, PARTY THRUST
or MIC. (Except USB Copying)
yy You can control recorded MIC sound
according to MIC volume.
yy You may not store more than 2000 files.
yy You can not record in AUTO DJ mode.
yy You can only change volume level between
MIN and 30 during recording. (Only CD
function)
yy On CD function, sound of MIC, SCRATCH,
DJ PRO, PARTY THRUST or DJ EFFECT is
recorded only during AUDIO CD X1 speed
REC. It is recorded AUDIO CD source too.
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
yy In case of the unsupported MP3/WMA file,
the file recording may be stopped.
Operating
yy Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete file may be made and not deleted
on PC.
yy If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
yy Multi card reader device or External HDD can
not be used for USB recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy It’ll be stored as follows.
AUDIO CD
MP3/WMA
The other source*
Tuner
* : AUX and the like.
Tuner : The current recording frequency is shown.
Operating 31
JUKE BOX Playback
Editing JUKE BOX
JUKE BOX function enables you to make a playlist of
your favorite tracks/files from a disc or USB device. A
playlist of up to 100 tracks/files can be entered.
1. Press and hold JUKE BOX / MEMORY on the
unit to enter the edit mode.
Making JUKE BOX list
It is supported only on stop status.
1. Press and hold JUKEBOX / MEMORY on the
remote control to enter the edit mode.
2. Select a track/file by pressing C/V
on the remote control or by turning
Y , U & SEARCH on the unit.
It is supported only on stop status.
2.Press PRESET·FOLDER W/S on the remote
control to select a track/file to edit.
3.Press C/V on the remote control or rotate
Y , U & SEARCH on the unit.
4.Press JUKE BOX / MEMORY.
5. Repeat 2 to 3 to store the other tracks/files.
6.Press JUKE BOX / MEMORY once again.
To play the JUKE BOX list, press d/M after you edit
the list.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET·FOLDER W/S on the remote control
to select the JUKE BOX program number.)
Deleting JUKE BOX list
Deleting function only works in the edit mode.
5.Press JUKE BOX / MEMORY once again.
1. Press and hold JUKE BOX / MEMORY on the
remote control to enter the edit mode.
To play the JUKE BOX list, press d/M after you make
the list.
2. Select a song by pressing PRESET·FOLDER W/S
on the remote control repeatedly.
,,Note
When making or modifying the JUKE BOX list,
REPEAT mode is off.
Enjoying JUKE BOX
Press JUKE BOX / MEMORY once on stop status.
“JUKE BOX ON” appears on the display window. To
play JUKE BOX list, press d/M on the remote control
or T on the unit.
To cancel it, press JUKE BOX / MEMORY once.
“JUKE BOX OFF” appears on the display window.
3.Press DELETE while a song is selected.
,,Note
yy To check the status of JUKE BOX, press
JUKEBOX / MEMORY once.
yy If there is no JUKE BOX list, “JUKE BOX
NONE” appears on the display window when
you press JUKE BOX / MEMORY.
yy JUKE BOX is switched off in the case below.
-- Changing to a different function.
-- Turning off and on the unit.
-- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
Y , U & SEARCH.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
3
Operating
3.Press JUKE BOX / MEMORY to save the track/
file.
32 Operating
Other Operations
Turn off the sound temporarily
Press
on the remote control to mute your sound.
You can mute your unit, for example, to answer the
telephone, the “MUTE” will appear in the display
window.
To cancel it, press
level.
again or change the volume
CHILDSAFE Mode
3
Operating
This function helps to prevent you from being
surprised when you turn on the unit in case that the
volume of the unit is set at a high level.
To turn on CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN”.
In CHILDSAFE mode, the volume increase gradually.
To turn off CHILDSAFE mode, press and hold OK on
the unit when the volume of the unit is “MIN” and
this mode is turned on.
,,Note
In case of CD, USB or BT function, CHILDSAFE
mode does not work after about 2 minutes
from power on the unit even if this mode is
enabled.
Displaying file information
(ID3 TAG)
While playing an MP3 file containing file information,
you can display the information by pressing INFO /
SLEEP.
DEMO
In the power off state, press USB REC / DEMO on
the unit once. The unit will power on and display the
each of functions with demo sound in the display
window. To cancel the DEMO function, press USB
REC / DEMO once more.
,,Note
yy While in DEMO, this unit will keep DEMO
status even if you unplug the power cord
connection.
yy You can enjoy other functions during the
DEMO, the DEMO will temporarily pause.
- Without
input key in 10 sec, the DEMO will
play back automatically.
Using Microphone
1. Connect your microphone to the MIC jack.
2. Play the music you want.
3. Sing along with the accompaniment. Adjust the
microphone volume by rotating MIC. clockwise or
counterclockwise on the unit.
,,Note
yy When not using the microphone, set the
MIC. to minimum or turn off the MIC and
remove the microphone from the MIC jack.
yy If the microphone is set too near the speaker,
a howling sound may be produced. In this
case, move the microphone away from the
speaker or decrease the sound level by using
the MIC.
yy If sound through the microphone is extremely
loud, it may be distorted. In this case, rotate
MIC. to minimum.
yy If your microphone’s sound feels not loud
though MIC VOL is max, you can adjust only
audio source volume lower.
-- Follow below step.
1. Press and hold VOICE CANCELLER on
the unit.
2. Reduce Audio Source Volume by rotating
VOL. counter-clockwise on the unit. To
initialize it, power off.
Operating 33
VOICE CANCELLER
KEY CHANGER
You can enjoy the function while playing the music,
by reducing singer vocal of music in the various
source.
You can adjust the key to 9 steps (4 steps higher, 4
steps lower and the original key).
Press the VOICE CANCELLER and “ON” will appear
in display window.
To cancel it, press VOICE CANCELLER again.
The quality of the VOICE CANCELLER may be
different depending on the recording conditions of
music files.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy To sharp the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
yy To flatten the key one by one, press the KEY
CHANGER( ) repeatedly during playback.
,,Note
yy This function is available CD, USB or BT
(Bluetooth) Function.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy To initialize it, change the Function,
disconnect the microphone or change the
music.
yy This function is available to use only when a
microphone is connected.
yy This function may not be initialized depending
on the status of connected devices.
yy If a microphone is not connected, “NOT
SUPPORT” appears in the display window.
yy It is not available on the MONO source.
yy To initialize it, change the Function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
LIGHTING effect
This function offers a party atmosphere by operating
the lighting on the unit.
1.Press LIGHTING / PARTY LINK on the unit.
OFF PEACEFUL ROMANTIC COOL
UPBEAT FIERY EXCITED DYNAMIC
HEALING SUNNY PARTY OFF ...
,,Note
yy Lighting function is available in all functions.
yy Lighting mode retains its previous mode
when you first press LIGHTING / PARTY
LINK, press again to change modes.
PARTY THRUSTER
Slide the lever to create a party atmosphere.
OFF
THRUST 1
THRUST 2
CLIMAX
The LED lighting and the sound effect will react
according to moving the lever of PARTY THRUSTER.
3
Operating
yy If the function is not available, “NOT
SUPPORT” appears in the display window.
34 Operating
Setting the Clock
1. Turn the unit on.
1. Turn the unit on.
2. Press and hold CLOCK.
2. Press and hold ALARM.
3. Select time mode by pressing C/V on the
remote control.
3.Press C/V on the remote control to
change the hours and minutes and press
RDS/SET to save.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4.Press RDS/SET to confirm your selection.
5. Select the hours by pressing C/V on the
remote control.
6.Press RDS/SET.
3
Using your player as an alarm
clock
7. Select the minutes by pressing C/V on
the remote control.
Operating
8.Press RDS/SET.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Refer to page 24)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
4.Press C/V on the remote control to select
function and press RDS/SET to save.
- Press C/V on the remote control to
select a memory No. when you select Tuner and
then, press RDS/SET.
If there is no memory No., this step is skipped.
5.Press C/V on the remote control to
change the volume and press RDS/SET to save.
,,Note
yy If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned off.
yy You can set alarm after you set the clock
time.
yy If you set the clock time and alarm, you
can check the alarm setting information
by pressing ALARM even when the unit is
turned off.
yy You can select ALARM ON/OFF mode by
pressing ALARM.
Operating 35
Sleep Timer Setting
1. Press and hold INFO / SLEEP. The display
window will be darkened by half.
2.Press INFO / SLEEP repeatedly to select delay
time between 10 and 180 minutes. After the
delay time, the unit will be turned off.
To cancel the sleep function, press INFO / SLEEP
repeatedly until “SLEEP 10” appears, and then
press INFO / SLEEP once again while “SLEEP 10” is
displayed.
,,Note
yy You can check the remaining time before the
unit is turned off.
yy You can edit the remain time when displays
the remaining time or “DIMMER”.
Dimmer
Press and hold INFO / SLEEP. The display window
will be darkened by half. To cancel it, press and hold
INFO / SLEEP and then press it repeatedly until dim
off.
,,Note
All the LED turns off when Dimmer is being
operated.
This unit will turn itself off to save electricity in the
case were the main unit is not connected to an
external device and is not used for 20 minutes.
The unit will also turn itself off after six hours if the
Main unit has been connected to another device
using the analog inputs.
Auto power down function is applied to only
MASTER unit in case of WIRELESS PARTY LINK
connection. In case of SLAVE unit, Auto power down
is available after disconnection SLAVE unit and
MASTER unit.
How to disconnect the wireless
network connection or the wireless
device.
Turn off the unit by pressing the power button for
more than 5 seconds.
3
Operating
yy Press and hold INFO / SLEEP to check or
change the remaining time.
Auto power down
36 Operating
AUTO POWER On
Auto function change
This unit automatically turns on by an input source :
LG TV or Bluetooth
This unit recognizes input signals such as Bluetooth
and LG TV or connected portable device, and then
changes suitable function automatically.
If you try to connect your Bluetooth device, this unit
turns on and connects your Bluetooth device. You
can play your music.
,,Note
3
When you try to connect Bluetooth
device
yy Depending on the connected device, this
function may not operate.
When you try to connect your Bluetooth device to
this unit, Bluetooth function is selected. Play your
music on the Bluetooth device.
yy Depending on the connected device, the unit
turns on but Bluetooth function may not be
connected.
When PORT.IN connection is
connected
Operating
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to
connect to the unit continually. Therefore it is
recommended to disconnect the connection
before turning off the unit.
When you connect the portable device to the PORT.
IN connector, PORTABLE function is selected. Play
your music on the portable device.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
unit is turned on.
When you turn on your LG TV connected by LG
Sound Sync, this unit changes the function to LG TV.
You can hear the sound from your TV.
yy If you turn on the unit using LG TV or
Bluetooth function, proper function of this
unit is turned on.
yy If you have already paired with this unit,
automatically this unit can turn on by an
input source when this unit is turned off.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled. To activate it, turn on
the unit.
When LG TV is connected
,,Note
yy This function is not available during recording
or deleting.
yy This function only works with devices that
were previously connected.
Operating 37
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with LG TV that supports LG Sound Sync.
Make sure your TV has the LG Sound Sync logo.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details of
LG Sound Sync.
1. Turn on the unit by pressing 1 on the remote
control or 1/! on the unit.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [Sound] -> [TV Sound output]
-> [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if the TV and this unit are
connected normally.
yy If the connection fails, check the conditions of
this unit and your TV : power, function.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turn off the unit.
-- Changing to a different function.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy The amount of time to turn off this unit is
different depending on your TV.
yy If you try to change the function on using
the LG TV function, volume will be change
according to the LG TV volume level.
yy Details of TV setting menu vary depending on
the manufacturers or models of your TV.
yy If you connect LG Sound Sync when “Music
Flow Bluetooth” app is connected, control
through the app is available.
yy If you turned off the unit directly by pressing
1 on the remote control or 1/! on the unit,
LG Sound Sync will be disconnected. To use
this function again, you should reconnect the
TV and the unit.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and
the LG TV is connected.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
3
Operating
2.Press F / WIRELESS LINK on the unit or F
on the remote control until LG TV function is
selected.
,,Note
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV’s remote control again, the unit
synchronizes with the TV.
38 Operating
WIRELESS PARTY LINK
Connection
The output sound of (MASTER) unit is expanded
to (SLAVE) unit.
It is compatible with unit that supports
WIRELESS PARTY LINK.
The name of function about sound expansion
between the compatible products wired or wirelessly
was changed to PARTY LINK or WIRELESS PARTY
LINK.
3
Operating
1. Press and hold F / WIRELESS LINK on the
unit for 3 seconds. PARTY LINK MODE SELECT
appears in the display window.
2. Rotate Y , U & SEARCH on the unit to
select MASTER or SLAVE.
- unit : Selects MASTER.
-
unit : Selects SLAVE.
Two units try to connect with each other.
3. When this unit is successfully connected each
other, “Slave Device Name CONNECTED” appears
in the MASTER unit. “CONNECTED TO Master
Device Name” appears in the SLAVE unit and
change to SLAVE soon.
,,Note
yy If you using the LG Sound Sync, this function
is not available. If you connect the LG TV
Function, “NOT SUPPORT” appears in the
display window.
yy You can use microphone in the SLAVE unit
only. In case of SLAVE unit, some functions
are supported only.
yy When WIRELESS PARTY LINK is
disconnected, SLAVE unit is changed to BT
function.
yy If the connection is failed, “FAILED” appears in
the display window.
yy Mute function is synchronized with each
other.
yy WIRELESS PARTY LINK connection will be
disconnected when you turn off the unit or
press and hold the F / WIRELESS LINK on
the unit for 3 seconds.
yy Sound of MASTER unit and SLAVE unit may
be different depending on playback staus or
source.
yy Check the following information when
connecting to Bluetooth.
-- You can connect only one Bluetooth
device in the MASTER unit. You cannot
connect Bluetooth device to the SLAVE
unit.
-- WIRELESS PARTY LINK connection is
only supported on Android or iOS devices.
(WIRELESS PARTY LINK connection
may not be supported depending on the
connected device specifications or OS.)
-- Removable/detachable Bluetooth
devices (ex. Dongle etc.) will not support
WIRELESS PARTY LINK connection.
-- When WIRELESS PARTY LINK is
connected, Blutooth connection is not
available in status of recording or deleting.
yy When WIRELESS PARTY LINK is connected,
you can not connect PARTY LINK.
Troubleshooting 39
Troubleshooting
General
Problem
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn it on again.
The unit does not work
properly.
yy Disconnect the power cord of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power.
yy Check whether electricity failed.
Check the condition by operating other electronic devices.
No sound.
yy Check whether you select right function.
Press function button and check the selected function.
The unit does not start
playback.
yy No disc is inserted. Insert a disc.
yy The disc is dirty. Clean the disc. (Refer to page 43)
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
yy The antenna is positioned or connected poorly.
Connect the antenna securely.
Radio stations cannot be
tuned in properly.
yy The signal strength of the radio station is too weak.
Tune to the station manually.
yy No stations have been preset or preset stations have been cleared (when tuning
by scanning preset channels).
Preset some radio stations, see page 26 for details.
4
Troubleshooting
yy An unplayable disc is inserted. Check the playable disc.
40 Troubleshooting
Problem
Cause & Solution
yy The remote control is too far from the unit.
Operate the remote control within about 23 ft (7 m).
The remote control does yy There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
not work properly.
yy The batteries in the remote control are exhausted.
Replace the batteries with new ones.
No light
yy Check the light effects by pressing LIGHTING / PARTY LINK.
yy Check whether your LG TV supports LG Sound Sync.
LG Sound Sync does not
work.
4
yy Check connection of LG Sound Sync.
yy Check sound setting of your TV and this unit.
Troubleshooting
Appendix 41
General specifications
General
Power requirements
Power consumption
Dimensions (W x H x D)
Net Weight
Operating temperature
Operating humidity
Refer to the main label on the unit.
Refer to the main label on the unit.
Networked standby : 0,5 W
(If all network ports are activated.)
Approx. 330 mm x 715 mm x 302 mm
Approx. 13.3 kg
5 °C to 35 °C (41 °F to 95 °F)
60 %
Inputs
Analog audio in (AUX IN)
Analog audio out (AUX OUT)
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
2,0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R)
Portable in (PORT. IN)
1.4 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC 1/2)
Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range
87,5 to 108.0 MHz or 87,50 to 108,00 MHz
5
Frequency Response
Signal-to-noise ratio
Dynamic range
Bus Power Supply (USB)
40 to 20,000 Hz
More than 75 dB
More than 80 dB
5 V 0 500 mA
Amplifier (RMS Output power)
Total output
HIGH
LOW
500 W
160 W × 2 (4 Ω at 1 KHz, 10% THD)
180 W × 1 (4 Ω at 200 Hz, 10% THD)
yy Design and specifications are subject to change without notice.
Appendix
System
42 Appendix
Trademarks and Licenses
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG
Electronics is under license.
Other trademarks and trade names are those of their respective owners.
5
Appendix
Appendix 43
Maintenance
Handling the Unit
When shipping the unit
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Keeping the exterior surfaces clean
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Do not use volatile liquids such as insecticide spray
near the unit. Wiping with strong pressure may
damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period
of time.
Cleaning Discs
Cleaning the unit
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for old vinyl records.
Maintaining the Unit
5
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished. For details,
please contact your nearest authorized service
center.
Download PDF