OWNER’S MANUAL Cinema 3D Sound Blu-ray™ Home Theater System Please read this manual carefully before operating your set and retain it for future reference. BH9520TW (BH9520TW, S92T1-S/W, S92T1-C, T2, W2) Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to. CAUTION : CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. 1 Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN 4 Getting Started Notes on Copyrights 1 Getting Started yy Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product. yy Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an authorized Customer Service Centre. yy Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs. yy This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited. yy Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability. Getting Started 5 Important Notice for TV colour system The colour system of this player differs according to currently playing discs. Only the multi system colour TV can receive all signals output from the player. yy If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC. yy The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen. yy Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder. >>Caution yy Watching a 3D content for a long period time may cause dizziness or tiredness. yy It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman. yy If you are experiencing headache, tiredness or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal. 1 Getting Started For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal. 6 Table of Contents Table of Contents 31 – Playback content in the USB device 3 System Setting 1 Getting Started 3 Safety Information 8Introduction 8 – Playable Discs and symbols used in this manual 9 – About the “7” Symbol Display 9 – Compatibility Notes 10 – File requirement 11 – AVCHD (Advanced Video Codec High Definition) 12 – About DLNA 12 – Certain System Requirements 12 – Regional Code 12 – System Select 13 Remote control 14 Front panel 15 Rear panel 2Connecting 16 17 17 18 20 20 21 21 22 22 23 24 24 24 25 25 26 26 27 28 28 31 Positioning the system Speaker Connection – Attaching the speakers to the player – Wireless speakers connection Connecting to Your TV – HDMI Connection – What is SIMPLINK? – ARC (Audio Return Channel) function – Video Connection – Resolution Setting Antenna connection Connections with external device – AUX Connection – PORT. IN connection – OPTICAL IN connection – HDMI IN 1/2 connection Connecting to your Home Network – Wired network connection – Wired Network Setup – Wireless Network Connection – Wireless Network Setup USB device connection 32Settings 32 – Initial Setup 33 – Adjust the Setup Settings 34 – [DISPLAY] Menu 35 – [LANGUAGE] Menu 36 – [AUDIO] Menu 38 – [LOCK] Menu 39 – [NETWORK] Menu 39 – [OTHERS] Menu 41 Sound Effect 41 Sound Zoom Effect (4.1 CH or 2.1 CH) 4 Operating 42 42 42 42 43 43 44 44 46 47 47 47 47 48 48 48 48 49 49 50 50 51 51 52 52 52 52 General Playback – Using [HOME] menu – Playing a Disc – Playing a file on a disc/USB device – Playing Blu-ray 3D disc – Enjoying BD-Live™ – Playing a file on a network server – Wi-Fi Direct™ Connection – Basic operations for video and audio content – Basic operations for photo content – Using the disc menu – Resume playback – Last Scene Memory Advanced Playback – Repeat Playback – Repeating a specific portion – Viewing content information – Changing content list view – Selecting a subtitle file – Options while viewing a photo – Listening to music while slide show On-Screen display – Displaying content information onscreen – Playing from selected time – Selecting a subtitle language – Hearing a different audio – Watching from a different angle Table of Contents 53 53 53 54 55 55 55 57 57 57 57 57 57 58 59 59 – Changing the TV Aspect Ratio – Changing subtitle code page – Changing the Picture Mode Audio CD Recording Playing the iPod – Enjoying iPod on the screen – Enjoying the iPod IN mode Radio Operations – Listening to the radio – Presetting the Radio Stations – Deleting a saved station – Deleting all the saved stations – Improving poor FM reception Using the Premium Using Bluetooth technology – Listening to music stored on the Bluetooth devices 76Maintenance 76 – Handling the Unit 76 – Notes on Discs 77 Important Information Relating to Network Services 7 1 2 3 5Troubleshooting 4 61Troubleshooting 61 – General 62 – Network 63 – Picture 63 – Sound 63 – Customer Support 63 – Open source software notice 5 6Appendix 64 Controlling a TV with the Supplied Remote Control 64 – Setting up the remote to control your TV 65 Network Software Update 65 – Network update notification 65 – Software Update 67 About Nero MediaHome 4 Essentials 67 – System Requirements 68 – Installing Nero MediaHome 4 Essentials 68 – Sharing files and folders 69 Area Code List 70 Language code List 71 Trademarks and Licenses 73 Audio Output Specifications 74Specifications 6 8 Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Description yy Discs such as movies that can be purchased or rented. yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. yy BD-R/RE discs that are recorded in BDAV format. Blu-Ray y u i r DVD-ROM yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented. yy Movie mode and finalized only yy Supports the dual layer disc also DVD-R DVD-RW DVD+R DVD+RW (12 cm) o Finalized AVCHD format y u i yy DVD±R/RW discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format DVD-RW (VR) (12 cm) r Audio CD (12 cm) t CD-R/RW (12 cm) y u i yy CD-R/RW discs that contain Movie, Music or Photo files. , > Indicates special notes and operating features. Note – Caution – VR mode and finalized only Audio CD yy ISO 9660+JOLIET, UDF and UDF Bridge format Indicates cautions for preventing possible damages from abuse. Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens. yy If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) yy This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. yy Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback. yy Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. yy You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista) About the “7” Symbol Display “7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media. Compatibility Notes yy Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center. yy This unit allows you to enjoy functions such as picture-in-picture, secondary audio and Virtual packages, etc., with BD-ROM supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1). Secondary video and audio can be played from a disc compatible with the picture-inpicture function. For the playback method, refer to the instructions in the disc. yy Viewing high-definition content and upconverting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device. yy Some BD-ROM and DVD discs may restrict the use of some operation commands or features. yy You can use a USB device to store some disc related information, including downloaded online content. The disc you are using will control how long this information is retained. 1 Getting Started yy Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. 9 10 Getting Started File requirement Movie files 1 Getting Started File Location File Extension Codec Format Disc, USB “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, “.m4v” (DRM free), “.vob”, “.3gp” DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) “.avi”, “.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.asf”, “.wmv”, ".m4v (DRM free) DIVX3.xx, DIVX4.xx, DIVX5.xx, DIVX6.xx, (Standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS, VC-1 SM (WMV3) Dolby Digital, DTS, MP3, WMA, AAC, AC3 SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/. txt), TMPlayer (.txt), DVD Subtitle System (.txt) DLNA Audio Format Subtitle Music files File Location File Extension Disc, USB “mp3”, “.wma”, “.wav”, “.m4a” (DRM free), “.flac” within 32 - 48 kHz (WMA), within 16 - 48 kHz (MP3) within 32 - 192 kbps (WMA), within 32 - 320 kbps (MP3) Some wav files are not supported on this player. “mp3”, “.wma”, “.wav”, “.m4a” (DRM free) within 32 - 48 kHz (WMA), within 16 - 48 kHz (MP3) within 32 - 192 kbps (WMA), within 32 - 320 kbps (MP3) Some wav files are not supported on this player. DLNA Sampling Frequency Bitrate Note Photo files File Location Disc, USB, DLNA File Extension “.jpg”, “.jpeg”, “.png”, “.gif” Recommended Size Note Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files are not supported. yy Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA and WMV. Getting Started ,,Note yy The file name is limited to 180 characters. yy Maximum files/folder: Less than 2 000 (total number of files and folders) ,,Note yy A “avi” file which is encoded “WMV 9 codec” is not supported. yy This player supports UTF-8 files even it contains Unicode subtitle contents. This player can not support the pure Unicode subtitle files. yy File compatibility may differ depending on the server. yy Depending on the types of file or ways of recording, it may not play back. yy Because the compatibility on DLNA server are tested on the bundle DLNA server (Nero MediaHome 4 Essentials Windows edition) environment, file requirements and playback functions may differ depending on media servers. yy A disc which was recorded by multi-session on normal PC is not supported on this player. yy Playing a movie subtitle files are only available on DLNA media server created by supplied Nero MediaHome 4 Essentials software on this player package. yy The files from removable media such as USB drive, DVD-drive etc. on your media server may not be shared properly. yy This unit cannot support the ID3 Tag embedded MP3 file. yy The total playback time of audio file indicated on the screen may not correct for VBR files. yy HD movie files contained on the CD/DVD or USB 1.0/1.1 may not played properly. Blu-ray Disc or USB 2.0 are recommended to play back HD movie files. yy This player supports H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a file with higher level, the warning message will appear on the screen. yy This player does not support files that are recorded with GMC*1 or Qpel*2. *1 GMC – Global Motion Compensation *2 Qpel – Quarter pixel yy To be playback a movie file, movie file name and Subtitle file name must be the same. yy If video codec is MPEG2 TS or MPEG2 PS, subtitle does not play back. yy The total playback time of music file indicated on the screen may not correct for VBR files. AVCHD (Advanced Video Codec High Definition) yy This player can playback AVCHD format discs. These discs are normally recorded and used in camcorders. yy The AVCHD format is a high definition digital video camera format. yy The MPEG-4 AVC/H.264 format is capable of compressing images at higher efficiency than that of the conventional image compressing format. yy This player can playback AVCHD discs using “x.v.Color” format. yy Some AVCHD format discs may not play depending on the recording condition. yy AVCHD format discs need to be finalized. yy “x.v.Color” offers a wider color range than normal DVD camcorder discs. 1 Getting Started yy Depending on the size and number of the files, it may take several minutes to read the contents on the media. yy The file requirements on page 10 are not always compatible. There may have some restrictions by file features and media server’s ability. 11 12 1 Getting Started Getting Started About DLNA Regional Code This Player is a DLNA Certified digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media server (PC and Consumer Electronics). This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through your home network. System Select The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5. When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information. Certain System Requirements For high definition video playback: yy High definition display that has HDMI input jack. yy BD-ROM disc with high definition content. yy HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors). Press B (OPEN/CLOSE) when a disc is inserted, and do not remove the disc. Press and hold M (PAUSE) for more than five seconds while [OPEN] is displayed in the display window. Getting Started 13 Remote control • • • • • • a • • • • • • B (OPEN/CLOSE): Ejects a disc. FUNCTION: Changes input mode. 0-9 numerical buttons: Selects numbered options in a menu. CLEAR: Removes a mark on the search menu or a number when setting the password. REPEAT (h): Repeats a desired section or sequence. • • • • • • b • • • • • • c/v (SCAN): Searches backward or forward. C/V (SKIP): Goes to the next or previous chapter / track / file. Z (STOP): Stops playback. d (PLAY): Starts playback. M (PAUSE): Pauses playback. SPEAKER LEVEL: Sets the sound level of desired speaker. SOUND EFFECT: Selects a sound effect mode. VOL +/-: Adjusts speaker volume. Battery Installation OPTICAL: Changes input mode to optical directly. MUTE: Mute the unit. • • • • • • c • • • • • • HOME ( ): Displays or exits the [Home Menu]. Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with 4 and 5 matched correctly. SOUND ZOOM : Selects a Sound Zoom effect mode. INFO/MENU (m): Displays or exits On-Screen Display. Direction buttons: Selects an option in the menu. PRESET +/-: Selects programme of Radio. TUNING +/-: Tunes in the desired radio station. ENTER (b): Acknowledges menu selection. BACK (1): Exits the menu or returns to the previous screen. TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available. DISC MENU: Accesses menu on a disc. • • • • • • d • • • • • • Colored (R, G, Y, B) buttons: - Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC] and [Premium] menu. - B button: Selects mono/ stereo in FM mode. SUBTITLE: Selects a subtitle language. AUDIO: Selects an audio language or audio channel. SLEEP: Sets a certain period of time after which the unit will switch to off. MIC/ECHO: Selects the microphone mode or microphone’s echo mode. After selecting the desired mode, press VOL +/- to adjust microphone volume or microphone’s echo volume. ? : This button is not available. X (REC): Records an audio CD. TV Control Buttons: See page 64. 1 Getting Started 1 (POWER): Switches the player ON or OFF. 14 Getting Started Front panel 1 Getting Started a Disc Slot >>Caution b Display Window Precautions in using the touch buttons c Remote Sensor yy Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. d MIC 1/2 e PORT. IN f iPod/ iPhone/ iPad/ USB Port g Operation buttons R (OPEN/CLOSE) T (PLAY / PAUSE) I (STOP) F (Function) Changes the input source or function. VOL. -/+ 1 (POWER) yy Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. yy Touch the button that you want to work in order to operate the function correctly. yy Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. Getting Started 15 Rear panel 1 Getting Started a AC power cord g LAN port b Speakers connectors h HDMI IN 1/2 c Cooling Fan i HDMI OUT TO TV d OPTICAL IN j VIDEO OUT e Antenna Connector k WIRELESS connector f AUX (L/R) INPUT C G Connecting 16 F A D 2 A A Positioning the system E A The following illustration shows an example of positioning the system. Note that the illustrations Ain these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A). A B C D E F G Connecting B C A C A A GB B A yy Before using the subwoofer, remove the protective vinyl. G F A A A E E A E A A D A A E A ABCD E F G speaker (L)/ A A Front B Cleft D EE F G A D right speaker (R): C A A B Front EE F G A Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. E F G A AA B C Center D E speaker: Place the center speaker above or below the monitor or screen. A A B C D Surround E F G left speaker (L)/ right speaker (R): F G A B C D E Surround A Place these speakers behind your listening position, E facing slightly inwards. B C D E F Subwoofer: G The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections. C D E F G Unit yy Place the center speaker at a safe distance from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage. yy The speakers contain magnetic parts, so colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen. B B C CG G A B A A A >>Caution yy Be careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure). yy This product is specially designed to produce the effect of the 3D Sound. Other speakers may not operate normally when connected. Connecting 17 Speaker Connection Attaching the speakers to the player Connector color Speaker Position Green Center Center Orange Subwoofer Any front position Red Front right Front right White Front left Front left 2. Connect the speaker cord to the connector on the speaker. 2 Connecting 1. Connect speaker cords to the player. Each speaker connector is color-coded. Use matching color connector for corresponding speakers. When connecting speaker cords to the player, insert the connector until it clicks. 18 Connecting Wireless speakers connection LED indicator of wireless receiver LED Color Operation Blue or yellow The wireless receiver is receiving the signal of the wireless TX. Red The Wireless Receiver is in standby mode. Off (No display) The power cord of wireless receiver is disconnected. 2 Connecting Setting up the wireless receiver for the first time 1. Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cables. 4. Turn on the main unit: The main unit and wireless receiver will be automatically connected. >>Caution yy Insert the Wireless TX with the marked “Wireless TX" facing upwards to rear on the unit. yy Insert the Wireless TX to the line on the Wireless TX into the WIRELESS connector on the rear of the unit. yy Do not insert a wireless dongle other than the Wireless TX dongle dedicated for the product. The product might be damaged or it may not be removed easily. Manually pairing wireless receiver When your connection is not completed, you can see the red LED on the wireless receiver and rear speakers are not made sound. To solve the problem, follow the below steps. 1. Press and hold I STOP button on the unit and MUTE button on the remote control simultaneously. - Displays the “REMATE”. Color Speaker Position Grey Rear Rear right Blue Rear Rear left 2. Connect the power cord of the Wireless Receiver to the outlet. 3. Turn off the unit and insert the Wireless TX into the WIRELESS connector on the rear of the unit. Line 2. Press PAIRING on back of the wireless receiver. - The blue or yellow LED will flicker 3. Turn off and on the unit. - If you see “blue or yellow” LED, it’ s successful. 4. If you don’t see “blue or yellow” LED, try again Step 1 - Step 3. 2Connecting Connecting About Ferrite Core (for EMI only) About EMI only) cord Be sure toFerrite attach theCore ferrite(for core to the power (for connecting to this unit and wireless receiver). Besuretoattachtheferritecoretothespeaker This ferrite core can reduce noises. cable.Thisferritecorecanreducenoises. How to attach the ferrite core 1. Press the stopper [a] of the ferrite core to open. 1.Pressthestopper[a]oftheferritecoretoopen. 2. Wind the power code cord on wireless 2.Windthepower of the unit oncereceiver on once on thecore. ferrite core. theferrite ,,Note yy If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there. yy If there is no audio signal for longer than 10 minutes, the Wireless Receiver will automatically switch to standby mode. In power saving mode, both LEDs will turn red. LEDs will turn blue or yellow when there is any audio signal back. yy If you operate main unit then wireless speakers (rear speakers) sound within a few seconds in standby mode. yy Set the distance between this unit and Wireless Receiver within 10 m (32 ft.). yy Optimum performance can be implemented only when the Wireless TX and the Wireless Receiver within distance of 2 m (6 ft.) to 10 m (32 ft.) is used since communication failure may occur if longer distance is used. (fig.3) yy Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. yy It takes a few seconds (and may take longer) for the Wireless TX and Wireless Receiver to communicate with each other. yy Use the rear speaker at least 30 cm (11 inch) away from either TV screen or PC monitor. 2 Connecting 3. Close the ferrite core until it clicks. 3.Closetheferritecoreuntilitclicks. Refer to the fig.3 and comment. Refertothefig.3andcomment. 19 20 Connecting Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy HDMI connection (page 20) yy Video connection (page 22) ,,Note 2 Connecting yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. Rear of the unit yy Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections. yy Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel. yy Do not connect your player via your VCR. The image could be distorted by the copy protection system. TV HDMI cable Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Additional Information for HDMI yy When you connect a HDMI or DVI compatible device make sure of the following: -- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. -- The connected device’s video input is set correctly for this unit. -- The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input. yy Not all HDCP-compatible HDMI or DVI devices will work with this player. -- The picture will not be displayed properly with non-HDCP device. Connecting ,,Note yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output. yy When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 22.) ARC (Audio Return Channel) function The ARC function enables an HDMI capable TV to send the audio stream to HDMI OUT of this player. To use this function: -- Your TV must support the HDMI-CEC and ARC function and the HDMI-CEC and ARC must be set to On. -- The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, refer to your TV manual. yy Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. -- You must use the HDMI cable (Type A, High Speed HDMI™ cable with Ethernet). yy When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. -- You can connect only one Home Theater to TV compatible with ARC. yy If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)). What is SIMPLINK? Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. Refer to the TV owner’s manual for the details of SIMPLINK function. LG TV’s with SIMPLINK function has the logo as shown above. ,,Note Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work. -- You must connect with the HDMI IN that supports the ARC function using the HDMI OUT on this player. 2 Connecting yy Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 35). 21 22 Connecting Video Connection Resolution Setting Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. 1. Press HOME ( ). Rear of the unit 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 2 Connecting 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Video cable TV 5.Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. Connecting 23 ,,Note yy If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press HOME ( ) to disappear the HOME menu. Antenna connection Connect the supplied antenna for listening to the radio. 2Press Z (STOP) for more than 5 seconds. yy When you set the resolution to 576i with HDMI connection, actual resolution is outputted to 576p. 2 Connecting yy If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. Rear of the unit yy The 1080p video output frame rate may be automatically set to either 24 Hz or 60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna. yy The resolution of the VIDEO OUT jack is always outputted at 576i resolution. ,,Note 24 Connecting Connections with external device AUX Connection You can enjoy the sound from an external component through the speakers of this system. 2 Connecting Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing FUNCTION and ENTER (b). PORT. IN connection You can enjoy the sound from your portable audio player through the speakers of this system. Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b). You can also use the F (Function) button on the front panel to select the input mode. You can also use the F (Function) button on the front panel to select the input mode. Rear of the unit MP3 player, etc... Red White To the audio output jacks of your component (TV, VCR, etc.) Connecting 25 OPTICAL IN connection HDMI IN 1/2 connection You can enjoy the sound from your component with a digital optical connection through the speakers of this system. You can enjoy the pictures and sound from your component through this connection. Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly. You can also use the F (Function) button on the front panel to select the input mode. Connect the HDMI OUT jack of your component into the HDMI IN 1 or 2 jack on this unit. And then select the [HDMI IN 1/2] option by pressing FUNCTION and ENTER (b). You can also use the F (Function) button on the front panel to select the input mode. To the digital optical output jack of your component To the HDMI OUT jack of your component (set-top box, digital satellite receiver, video game machine, etc.) ,,Note yy You cannot change the video resolution in the HDMI IN 1/2 mode. Change the video resolution of the connected component. yy If the video output signal is abnormal when your personal computer is connected to HDMI IN 1/2 jack, change the resolution of your personal computer to 576p, 720p, 1080i or 1080p. yy The video signal from the HDMI input cannot be output from the component or composite video outputs. yy The player sends audio from the HDMI inputs to both the HDMI output and to the unit’s speakers. Connecting Rear of the unit Rear of the unit 2 26 Connecting Connecting to your Home Network 2 Connecting This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services. Wired network connection Broadband service Router Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Please refer to the documentation for your network device for further instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable. DLNA certified servers ,,Note yy When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. yy Do not connect a modular phone cable to the LAN port. yy Since there are various connection configurations, please follow the specifications of your telecommunication carrier or internet service provider. yy If you want to access content from DLNA servers, this player must be connected to the same local area network with them via a router. yy To set your PC as a DLNA server, install the supplied Nero MediaHome 4 on your PC. (see page 67) Rear of the unit Connecting 27 Wired Network Setup Advanced Setting If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow. If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use W/S to select [Wired] and press ENTER (b). 2 Preparation 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. Network will automatically be connected to the unit. 2.Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. ,,Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. 3. Select [Next] and press ENTER (b) to apply network settings. Network connection status is displayed on the screen. 4. Press ENTER (b) while [Close] is highlighted to finish the wired network settings. Connecting Before setting the wired network, you need to connect the broadband internet to your home network. 28 Connecting Wireless Network Connection Wireless Network Setup Another connection option is to use an Access Point or a wireless router. The network configuration and connection method may vary depending on the equipment in use and the network environment. For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Setup] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network. 2 Preparation Connecting Before setting the wireless network, you need to: Wireless Communication -- connect the broadband internet to the wireless home network. DLNA certified servers Access Point or Wireless Router Broadband service -- set the access point or wireless router. -- note the SSID and security code of the network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings. For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option. If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home. If wired network is not connected to the unit, all available networks are displayed on the screen. 3.Use W/S to select a desired SSID of wireless network and press ENTER (b). If you have security on your access point, you need to input the security code as necessary. Connecting 29 Advanced Setting If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b). 1. Use W/S to select [Wireless] and press ENTER (b). ,,Note yy WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network. 4.Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. ,,Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part. 5. Select [Next] and press ENTER (b) to apply network settings. [AP List] - Scans all available access points or wireless routers within range and display them as a list. [Network name (SSID)] – Your access point may not be broadcasting its network name (SSID). Check your access point settings through your computer and either set your access point to broadcast SSID, or manually enter the network name in [Network name(SSID)]. [PBC] – If your access point or wireless router that supports the PBC (Push Button Configuration) method, select this option and press the Push Button on your access point within 120 counts. You do not need to know the network name (SSID) and security code of your access point. [PIN] – If your access point supports the PIN Code configuration method based on WPS(WiFi Protected Setup), select this option and note the code number on the screen. And then, enter the PIN number on a setting menu of your access point to connect. Refer to the documentation for your network device. 2. Follow the instructions of each connection method on the screen. Network connection status is displayed on the screen. 6. Select [Close] and press ENTER (b) to complete the network connection. ,,Note To use PBC and PIN network connection, security mode of your access point must be set to OPEN or AES. Connecting yy An Access Point is a device that allows you to connect to your home network wirelessly. 2 30 Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. 2 Connecting yy Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. yy Our company is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. yy The features of BD-ROM discs made available through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc. yy Some internet contents may require a higher bandwidth connection. yy Even if the player is properly connected and configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content. yy Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. yy Any fees charged by an ISP including, without limitation, connection charges are your responsibility. yy A 10 Base-T or 100 Base-TX LAN port is required for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player. yy You must use a Router to use xDSL service. yy A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.) yy The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. yy The wireless network operate at 2.4GHz radio frequencies that are also used by other household devices such as cordless telephone, Bluetooth® devices, microwave oven, and can be affected by interference from them. yy Turn off all unused network equipment in your local home network. Some devices may generate network traffic. yy For the purpose of the better transmission, placing the player from the access point as close as possible. yy In some instances, placing the access point or wireless router at least 0.45 m (1.5 ft.) above the floor may improve the reception. yy Move closer to the access point if possible or reorient the player so there is nothing between it and the access point. yy The reception quality over wireless depends on many factors such as type of the access point, distance between the player and access point, and the location of the player. yy Set your access point or wireless router to Infrastructure mode. Ad-hoc mode is not supported. Connecting USB device connection This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. 31 ,,Note yy This player supports USB flash drive/external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live, only FAT16 and FAT32 formats are supported. Use the USB flash drive/external HDD formatted in either FAT16 or FAT32 when using BD-Live and Audio CD recording. yy This unit can support up to 4 partitions of the USB device. yy Do not extract the USB device during operation (play, etc.). When you connect the USB device on the HOME menu, the player plays a music file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear. File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading. 2. Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select the [USB] option using W/S, and press ENTER (b). yy A USB device which requires additional program installation when you have connected it to a computer, is not supported. yy USB device: USB device that supports USB1.1 and USB2.0. yy Movie, music and photo files can be played. For details of operations on each file, refer to relevant pages. yy Regular back up is recommended to prevent data loss. yy If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. yy Some USB device may not work with this unit. yy Digital camera and mobile phone are not supported. yy USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. 5. Select a file using W/S/A/D, and press PLAY or ENTER (b) to play the file. 6. Withdraw the USB device carefully. 2 Connecting yy The USB device can be used for the local storage for enjoying BD-LIVE discs with Internet. 32 System Setting Settings Initial Setup 5.Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network settings and speaker setup on the initial setup wizard. 1.Press 1 (POWER). The initial setup wizard appears on the screen. 2.Use W/S/A/D to select a display language and press ENTER (b). 6. Select [Next] and press ENTER (b) to apply network settings. 3 System Setting 3. Read and prepare the preparations for the network settings and then press ENTER (b) while [Start] is highlighted. Network connection status is displayed on the screen. For details on network settings, refer to "Connecting to your Home Network" on page 26. 7. Select [Next] and press ENTER (b). If wired network is connected , the network connection setting will automatically be finished. 4. All available networks are displayed on the screen. Use W/S to select [Wired Network] or desired SSID of wireless network and press ENTER (b). If you have security on your access point, you need to input the security code as necessary. Read and prepare the preparations for the wireless speaker setting. System Setting 33 8. Select [Next] and press ENTER (b). 9. Press ENTER (b) to verify the test tone signals of the speakers. Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME ( ). After verifying the test tone signals, press ENTER (b) while [Stop] is highlighted. Select [Next] and press ENTER (b). 2.Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 10.Check all the settings that you have set in the previous steps. 3 Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select [Previous] and press ENTER (b). 4.Use W/S to select a second setup option, and press ENTER (b) to move to the third level. 5.Use W/S to select a desired setting, and press ENTER (b) to confirm your selection. System Setting 3.Use W/S to select the first setup option, and press D to move to the second level. 34 System Setting [DISPLAY] Menu Resolution TV Aspect Ratio Sets the output resolution of the HDMI video signal. Refer to page 22 for details about the resolution setting. Select a TV aspect ratio option according to your TV type. 3 [Auto] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. [4:3 Pan Scan] [1080p] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. [1080i] [4:3 Letter Box] System Setting [16:9 Original] Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. ,,Note You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. Outputs 1080 lines of progressive video. Outputs 1080 lines of interlaced video. [720p] Outputs 720 lines of progressive video. [576p] Outputs 576 lines of progressive video. [576i] Outputs 576 lines of interlaced video. 1080p Display Mode When the resolution is set to 1080p, select [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input. ,,Note yy When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [50 Hz]. yy Even when [1080p Display Mode] is set to [24 Hz], if your TV is not compatible with 1080p/24 Hz, the actual frame frequency of the video output will be 50 Hz to match the video source format. System Setting 35 HDMI Color Setting [LANGUAGE] Menu Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. Display Menu [YCbCr] Select when connecting to a HDMI display device. [RGB] Select when connecting to a DVI display device. 3D Mode [Off] Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback. [On] Blu-ray 3D disc playback will output as 3D mode. Wallpaper Changes the background of the initial screen. Home Menu Guide This function allows you to display or delete the guide bubble on the Home Menu. Set this option to [On] for displaying guide. Disc Menu/Disc Audio/ Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Other] Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 70. [Off] (Disc Subtitle only) Turn off Subtitle. ,,Note Depending on the disc, your language setting may not work. 3 System Setting Select the type of output mode for Blu-ray 3D disc playback. Select a language for the [Setup] menu and onscreen display. 36 System Setting [AUDIO] Menu Speaker Setup Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level. ,,Note Since many factors affect the type of audio output, see “Audio Output Specifications” on page 73 for details. Digital Output [PCM Stereo] (HDMI only) 3 System Setting Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder. [Speaker] [PCM Multi-Ch] (HDMI only) Select a speaker that you want to adjust. Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [Volume] [DTS Re-Encode] (HDMI only) [Distance] Select if you connect this unit’s HDMI OUT jack to a device with DTS decoder. [BitStream] (HDMI only) Select if you connect this unit’s HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder. ,,Note yy When [Digital Output] option is set to [PCM Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID. yy If the [Digital Output] option is set to [DTS Re-Encode], the DTS Re-Encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like [BitStream]). yy This setting is not available on the input signal from an external device. Adjust the output level of each speaker. Adjust the distance between each speaker and the listening position. [Test/ Stop test tone] The speakers will emit a test tone. [OK] Confirms the setting. [Cancel] Cancels the setting. System Setting 37 HD AV Sync Semi Karaoke Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms. When a chapter/ title is fully finished, this function shows the score on the screen with a fanfare sound DRC (Dynamic Range Control) This function allows you to listen to a movie at a lower volume without losing clarity of sound. [Off] Turns off this function. Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output. [Auto] The dynamic range of the Dolby TrueHD audio output is specified by itself. And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode. ,,Note The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode. Connect wireless speakers When the unit is manufactured, the ID is already set. If interference occurs or you use a new wireless unit, an ID should be set again. When you finished singing a score will appear on the screen. [Off] Fanfare and score do not appears on the screen. ,,Note hen you watch movies, “Off ” the Semi yy W Karaoke at the Setup menu or enjoy it without connecting the microphone if the fanfare or score appears during changing a chapter. yy T he Semi Karaoke function is available only when a microphone is connected. yy The fanfare and score is applied for only BDROM and DVD-title playback. 3 System Setting [On] [On] 38 System Setting [LOCK] Menu DVD Rating The [LOCK] settings affect only BD-ROM and DVD playback. Blocks playback of rated DVD based on their content. (Not all discs are rated.) To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password. 3 [None] System Setting Enter a 4-digit password twice, and press ENTER (b) to create a new password. [Change] Enter the current password and press ENTER (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password. If you forget your password If you forget your password, you can clear it using the following steps: 1. Remove any disc that might be in the player. 2. Select [Password] option in the [Setup] menu. 3. Use Number buttons to enter “210499”. The password is cleared. ,,Note If you make a mistake before pressing ENTER (b), press CLEAR. Then input the correct password. [Rating 1-8] Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. [Unlock] If you select [Unlock], parental control is not active and the disc plays in full. Blu-ray Disc Rating Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.  All BD-ROM can be played. [0-254] Prohibits play of BD-ROM with corresponding ratings recorded on them. ,,Note The [Blu-ray Disc Rating] will be applied only for the BD disc that containing the Advanced Rating Control. Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 69. System Setting 39 [NETWORK] Menu The [NETWORK] settings are needed to use the software update, BD Live and on-line content services. Connection Setting Premium [Country Setting] Select your area for displaying proper services and contents on the [Premium] and [LG Apps] feature. If your home network environment is ready to connect the player, the player needs to be set the wired or wireless network connection for network communication. (See “Connecting to your Home Network” on page 26.) Device Name Connection Status Wi-Fi Direct If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established. This player is a Wi-Fi Direct™ certified device. Wi-Fi Direct™ is the technology that devices to connect each other without connecting to an Access point or a router. Set this option to [On] for activating the Wi-Fi Direct™ mode. Refer to page 44 for the device connection. You can restrict Internet access when BD-LIVE functions are used. [Permitted] Internet access is permitted for all BD-LIVE contents. [Partially permitted] Internet access is permitted only for BDLIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate. [Prohibited] Internet access is prohibited for all BD-LIVE contents. [OTHERS] Menu DivX VOD ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration. [Register] Displays the registration code of your player. [Deregister] Deactivate your player and display the deactivation code. ,,Note All the downloaded videos from DivX(R) VOD with this player’s registration code can only be played on this unit. 3 System Setting BD-LIVE connection You can make a network name using virtual keyboard. This player will be recognised by the name you are entering on your home network. 40 System Setting Network Play This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information. ,,Note 3 System Setting yy This unit and the DLNA Certified Smartphone must be connected to the same network. yy To use the [Network Play] function using a DLNA certified smartphone, press HOME ( ) to display the home menu before connecting to this unit. yy While controlling the unit using the [Network Play] function, the remote control may not work. yy Available file formats described on page 10 are not always supported on [Network Play] function. Auto Power Off The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 20 minutes since the Screen Saver is displayed. Set this option to [Off ] to leave the screen saver until the unit is operated by the user. ,,Note Depending on the function, this function may not be available. Initialize [Factory Set] You can reset the player to its original factory settings. [Blu-ray Storage Clear] Initializes the BD-Live contents from the connected USB storage. ,,Note If you reset the player to its original factory settings using [Factory Set] option, you have to set all the activation for the on-line services and network settings again. Software [Information] Displays the current software version. [Update] You can update the software by connecting the unit directly to the software update server (see page "Network Software Update" on page 65). Disclaimer Notice Press ENTER (b) to view the notice of Network Service Disclaimer. System Setting Sound Effect 41 Setting the [User EQ] You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects. [Natural Plus]: You can enjoy the natural sound effect same as 5.1 channel. [Natural]: You can enjoy comfortable and natural sound. 1.Use W/S to select the desired frequency. [Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded. Select [Cancel] option then press ENTER (b) to cancel the setting. Select [Reset] option then press ENTER (b) to reset the all adjustments. [Clear Voice]: This mode makes voice sound clear, improving the quality of voice sound. [Game]: You can enjoy more virtual sound while playing video games. [Night]: This may be useful when you want to watch movies at low volumes late at night. Sound Zoom Effect (4.1 CH or 2.1 CH) 1. Press SOUND ZOOM. [Up Scaler]: When listening to MP3 files or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources. [Loudness]: Improves bass and treble sound. [User EQ]: You can adjust the sound by raising or lowering the level of specific frequency. 3D Sound Effect 3D Sound features deliver sound not only towards the front or rear but also to the top, creating a wider spot so you can enjoy more immersive and cinematic surround sound. [3D Music]: This mode delivers outstanding surround sound, providing a concert hall-like music experience in your home. [3D Movie]: This mode delivers outstanding surround sound, providing a theater-like movie experience in your home. 2. Press SOUND ZOOM repeatedly to select the desired mode. [Auto] : Switches to the optimum level of the sound zoom for watching a 3D content automatically. [Manual] : When watching a 3D or 2D content, you can adjust the level of sound zoom using W/S. 3 System Setting [Bass Blast]: Reinforce the bass sound effect from front left and right speaker and subwoofer. 2.Use A/D to select the desired level. 42 Operating General Playback Playing a Disc erot Using [HOME] menu 1. Insert a disc in the disc slot. The home menu appears when you press HOME ( ). Use W/S/A/D to select a category and press ENTER (b). For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically. 2.Press HOME ( ). 3. Select [Movie] or [Music] using A/D, and press ENTER (b). 4. Select [Blu-ray Disc], [DVD], [VR] or [Audio] option using W/S, and press ENTER (b). ,,Note yy Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors. 4 a [Music] - Plays audio contents. Operating b [Movie] - Plays video contents. c [Photo] - Plays photo contents. d [Premium] - Displays the Premium Home screen. e [Input] - Changes input mode. f [Setup] - Adjusts the system settings. yy Depending on the BD-ROM titles, a USB device connection may be needed for the proper playback. yy Unfinalized DVD VR format discs may not be played in this player. yy Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs. Playing a file on a disc/USB device yui This player can play movie, music and photo files contained in the disc or USB device. 1. Insert a data disc in the disc slot or connect a USB device. 2.Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select [Data] or [USB] option using W/S, and press ENTER (b). 5. Select a file using W/S/A/D, and press d(PLAY) or ENTER (b) to play the file. Operating 43 Playing Blu-ray 3D disc e Enjoying BD-Live™ e This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes. BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. Preparation In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to: yy Check your TV is 3D capable and has HDMI input(s). ear 3D glasses to enjoy the 3D experience yy W if it is necessary. yy Check whether the BD-ROM title is the Bluray 3D disc or not. yy Connect an HDMI cable (High Speed HDMI™ Cable with Ethernet) between the player’s HDMI output and TV’s HDMI input. 2. Insert a disc in the disc slot. The playback starts automatically. 3. Refer to the owner’s manual of your 3D-ready TV for the further instruction. You may need to adjust the display settings and focus on your TV’s setting for the improved 3D effect. >>Caution yy Watching a 3D content for a long period time may cause dizziness or tiredness. yy It is not recommended to watch a movie in 3D mode for infirm, child and pregnant woman. yy If you are experiencing headache, tiredness or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal. 2. Insert a USB storage device to the USB port on the front panel. A USB storage device is needed to download bonus content. 3.Press HOME ( ), and set the [BD-LIVE connection] option on the [Setup] menu (page 39). Depending on a disc, the BD-Live function may not be operated if [BD-LIVE connection] option is set to [Partially Permitted]. 4. Insert a BD-ROM with BD-Live. The operations are differ depending on the disc. Refer to the manual supplied with the disc. >>Caution Do not extract the connected USB device while content is being downloaded or a Bluray disc is still in the disc slot. Doing so may damage the connected USB device and BDLive features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected USB device from the PC and reuse it with this player. ,,Note yy Some BD-Live contents may be restrictively accessed in some territories by contents provider’s own decision. yy It may take up to several minutes to load and start enjoying BD-Live contents. 4 Operating 1.Press HOME ( ), and set the [3D Mode] option on the [Setup] menu to [On] (page 35). 1. Check the network connection and settings (page 26). 44 Operating Playing a file on a network server yui Wi-Fi Direct™ Connection This player can play video, audio and photo files located in a DLNA server through your home network. yui 1. Check the network connection and settings (page 26). 2.Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server on the list using W/S, and press ENTER (b). Connecting to a Wi-Fi Direct™ certified device This player can play movie, music and photo files located in a Wi-Fi Direct™ certified device. The Wi-Fi Direct™ technology make the player to be directely connected to a Wi-Fi Direct™ certified device without connecting to a network device such as an access point. 1. Set the [Wi-Fi Direct] option on the [Setup] menu to [On] (page 39). 2.Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select [Wi-Fi Direct] option using W/S, and press ENTER (b). 4 Operating If you want to rescan available media server, press the green (G) colored button. 5. Select a file using W/S/A/D, and press ENTER (b) to play the file. ,,Note yy The file requirements are described on page 10. yy The thumbnail of the unplayable files can be displayed, but those cannot be played on this player. 5. Select a Wi-Fi Direct™ device on the list using W/S, and press ENTER (b). Wi-Fi Direct™ connection will be automatically proceeded. yy The subtitle file name and movie file name have to be the same and located at the same folder. yy The playback and operating quality may be affected by your home network condition. yy You may experience connection problems depending on your server’s environment. yy To set your PC as a DLNA server, install the supplied Nero MediaHome 4 on your PC. (see page 67) If the Wi-Fi Direct™ device supports the PIN Code configuration method based on WPS(WiFi Protected Setup), select a device on the list and press yellow (Y) coloured button. Note the PIN number on the screen. And then, enter the PIN number on a setting menu of the device to connect. If you want to rescan available Wi-Fi Direct™ device, press the green (G) coloured button. Operating 45 ,,Note When you connect this unit from other Wi-Fi Direct™ devices, PIN connection method is not available. 6. Select a server that shared from the connected Wi-Fi Direct™ device using W/S, and press ENTER (b) to navigate the server. Connecting to a Wi-Fi available devices yui This player can connect to a general Wi-Fi device using Wi-Fi Direct™ function. 1. Set the [Wi-Fi Direct] option on the [Setup] menu to [On] (page 39). 2.Press HOME ( ). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select [Wi-Fi Direct] option using W/S, and press ENTER (b). To select a server from the device list, files or folders must be shared by DLNA server from the connected Wi-Fi Direct™ device. 4 ,,Note yy For the purpose of the better transmission, placing the player from the Wi-Fi Direct™ certified server as close as possible. 5. Press red (R) coloured button to display the [SSID], [Security Option] and [Encription] of the player. yy This unit can connect only 1 device at a time. Multiple connection is not available. yy If you try to connect wireless network while a device is connected by Wi-Fi Direct™ function , Wi-Fi Direct™ connection will be force disconnected. yy If this player and a Wi-Fi Direct™ device are connected to the different local area network, Wi-Fi Direct™ connection may not available. 6. On your Wi-Fi device, make a network connection to this player, using [Network name (SSID)], [Security Option] and [Encription] at step 5 above. yy If a Wi-Fi Direct™ certified device is not in Wi-Fi direct standby mode, this product can’t find the device. 7. Press BACK (1) twice to display the device list. yy This product cannot connect to a Wi-Fi direct™ device which is in Group Owner mode. Operating 7. Select a file using W/S/A/D, and press ENTER (b) to play the file. 46 Operating 8. Select a server that shared from the connected Wi-Fi device using W/S, and press ENTER (b) to navigate the server. Basic operations for video and audio content To stop playback Press Z (STOP) while playback. To pause playback Press M (PAUSE) while playback. Press d (PLAY) to resume playback. To select a server from the device list, files or folders must be shared by DLNA server from the connected device. 9. Select a file using W/S/A/D, and press ENTER (b) to play the file. ,,Note 4 In case of connection to a Wi-Fi equipped device, PIN connection does not work. To play frame-by-frame (Video) Press M (PAUSE) while movie playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback. To scan forward or backward Press c or v to play fast forward or fast reverse during playback. Operating You can change the various playback speeds by pressing c or v repeatedly. To slow down the playing speed While the playback is paused, press v repeatedly to play various speeds of slow motion. To skip to the next/previous chapter/track/file During playback, press C or V to go to the next chapter/track/file or to return to the beginning of the current chapter/track/file. Press C twice briefly to step back to the previous chapter/track/file. In the file list menu of a server, there may have many types of contents in a folder together. In this case, press C or V to go to the previous or next content with same type. Operating 47 Basic operations for photo content To play a slide show Press d (PLAY) to start slide show. To stop a slide show Press Z (STOP) while slide show. To pause a slide show Press M (PAUSE) while slide show. Press d (PLAY) to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press A or D to go to the previous or next photo. The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point. ,,Note yy The resume point may be cleared when a button is pressed (for example; 1 (POWER), B (OPEN/CLOSE), etc). yy On BD-ROM discs with BD-J, the resume playback function does not work. yy If you press Z (STOP) once during BD-ROM interactive title playback, the unit will be in Complete Stop mode . To display the disc menu The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu while playback, press DISC MENU. Use W/S/A/D buttons to navigate through menu items. To display the Pop-up menu Some BD-ROM discs contain Pop-up menu that appears while playback. Press TITLE/POPUP while playback, and use W/S/ A/D buttons to navigate through menu items. Last Scene Memory er This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. ,,Note yy Last Scene Memory function for a previous disc is erased once a different disc is played. yy This function may not work depending on the disc. yy On BD-ROM discs with BD-J, the last scene memory function does not work. yy This unit does not memorize settings of a disc if you switch off the unit before commencing to play it. 4 Operating Using the disc menu ero Resume playback eroyt u 48 Operating Advanced Playback Repeating a specific portion eroty Repeat Playback erotu y This player can repeat a portion you have selected. During playback, press REPEAT (h) repeatedly to select a desired repeat mode. Blu-ray Disc / DVD / Movie files jA- – Selected portion will be repeated continually. jChapter – The current chapter will be played back repeatedly. jTitle – The current title will be played back repeatedly. jAll – All the tracks or files will be played back repeatedly. 4 Operating To return to normal playback, press REPEAT (h) repeatedly to select [Off ]. Audio CDs/Music files ;Track– The current track or file will be played back repeatedly. :All – All the tracks or files will be played back repeatedly. l – The tracks or files will be played back in random order. l:All – All the tracks or files will be played back repeatedly in random order. kA-B – Selected portion will be repeated continually. (Audio CD only) To return to normal playback, press CLEAR. ,,Note yy If you press V once during Repeat Chapter/Track playback, the repeat playback cancels. yy This function may not work on some disc or title. 1. While playback, press REPEAT (h) to select [A-] at the beginning of the portion you wish to repeat. 2.Press ENTER (b) at the end of the portion. Your selected portion will be repeated continually. 3. To return to normal playback, press REPEAT (h) repeatedly to select [Off ]. ,,Note yy You cannot select a portion less than 3 seconds. yy This function may not work on some disc or title. Viewing content information y The player can display the content information. 1. Select a file using W/S/A/D. 2. Press INFO/MENU (m) to display the option menu. 3. Select the [Information] option using W/S, and press ENTER (b). The file information appears on the screen. While movie playback, you can display the file information by pressing TITLE/POPUP. ,,Note The information displayed on the screen may not correct comparing actual content information. Operating 49 Changing content list view yui Selecting a subtitle file y On the [Movie], [Music] or [Photo] menu, you can change the content list view. If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie. Method 1 Press red (R) colored button repeatedly. 1.Use W/S/A/D to select the subtitle file you wish to play in the [Movie] menu. 2.Press ENTER (b). ,,Note yy If you press Z (STOP) while playback, the subtitle selection is cancelled. yy This function is not available for playing file on a server via home network. Method 2 1. On the content list, press INFO/MENU (m) to display the option menu. 2.Use W/S to select the [View Change] option. 3.Press ENTER (b) to change the content list view. 4 Operating Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when you play the movie file. 50 Operating Options while viewing a photo i You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2. Select an option using W/S. Listening to music while slide show i You can display photo files while listening to music files. 1. While viewing a photo in full screen, press INFO/ MENU (m) to display the option menu. 2.Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] menu. 3.Use W/S to select a device, and press ENTER (b). Device that you can select are differ depending on the location of the photo file you are displaying in full screen. 4 Operating a Current photo/Total number of photos – Use A/D to view previous/next photo. b Slide Show – Press ENTER (b) to start or pause slide show. Photo location Available Device Disc, USB Disc, USB DLNA server DLNA server 4.Use W/S to select a file or a folder you wish to play. c Music Select – Select the background music for the slide show (page 50). d Music –Press ENTER (b) to start or pause background music. e Rotate – Press ENTER (b) to rotate the photo clockwise. f Zoom – Press ENTER (b) to display the [Zoom] menu. g Effect – Use A/D to select a transition effect between photos in a slide show. h Speed – Use A/D to select a delaying speed between photos in a slide show. 3. Press BACK (1) to exit the option menu. Select g and press ENTER (b) to display the upper directory. ,,Note When selecting music file from a server, folder selection is not available. Only file selection is available. 5.Use D to select [OK], and press ENTER (b) to complete music selection. Operating On-Screen display 2. Select an option using W/S. You can display and adjust various information and settings about the content. 4. Press BACK (1) to exit the On-Screen display. Displaying content information on-screen eroy 1. While playback, press INFO/MENU (m) to show various playback information. 51 3.Use A/D to adjust the selected option value. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs. yy Available items may differ depending on discs or titles. yy If an interactive Blu-ray Disc is playing back, some setting information is displayed on the screen but prohibited to be changed. 4 Operating a Title – current title number/total number of titles b Chapter – current chapter number/total number of chapters c Time – elapsed playing time/total playback time d Audio – selected audio language or channel e Subtitle – selected subtitle. f Angle – selected angle/total number of angles g TV Aspect Ratio – selected TV aspect Ratio h Picture Mode – selected picture mode 52 Operating Playing from selected time eroy Hearing a different audio eroy 1. Press INFO/MENU (m) during playback. The time search box shows the elapsed playing time. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2. Select the [Time] option and then input the required start time in hours, minutes, and seconds from left to right. For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”. Press A/D to skip the playback 60 seconds forward or backward. 3.Press ENTER (b) to start playback from selected time. ,,Note yy This function may not work on some disc or titles. 4 yy This function may not work depending on the file type and ability of the DLNA server. Operating Selecting a subtitle language eroy 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2.Use W/S to select the [Subtitle] option. 3.Use A/D to select desired subtitle language. 4. Press BACK (1) to exit the On-Screen display. ,,Note yy Some discs allow you to change subtitle selections only via the disc menu. If this is the case, press TITLE/POPUP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu. yy You can select the [Subtitle] option on the On-Screen display directely by pressing SUBTITLE button. 2.Use W/S to select the [Audio] option. 3.Use A/D to select desired audio language, audio track or audio channel. ,,Note yy Some discs allow you to change audio selections only via the disc menu. In this case, press TITLE/POP-UP or DISC MENU button and choose the appropriate audio from the selections on the disc menu. yy Immediately after you have switched sound, there may be a temporary discrepancy between the display and actual sound. yy On BD-ROM disc, the multi audio format (5.1CH or 7.1CH) is displayed with [MultiCH] in the on-screen display. yy You can select the [Audio] option on the On-Screen display directely by pressing AUDIO button. Watching from a different angle er If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2.Use W/S to select the [Angle] option. 3.Use A/D to select desired angle. 4. Press BACK (1) to exit the On-Screen display. Operating 53 Changing the TV Aspect Ratio eoy Changing the Picture Mode eroy You can change the TV aspect ratio setting while playback. You can change the [Picture mode] option while playback. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2.Use W/S to select the [TV Aspect Ratio] option. 2.Use W/S to select the [Picture Mode] option. 3.Use A/D to select desired option. 4. Press BACK (1) to exit the On-Screen display. 4. Press BACK (1) to exit the On-Screen display. ,,Note Even if you change the value of the [TV Aspect Ratio] option in On-Screen display, the [TV Aspect Ratio] option in the [Setup] menu is not changed. 3.Use A/D to select desired option. Setting the [User] option 1. During playback, press INFO/MENU (m) to display the On-Screen display. 2.Use W/S to select the [Picture Mode] option. 3.Use A/D to select the [User setting] option, and press ENTER (b). Changing subtitle code page y 4 Operating If the subtitle is displayed in broken letter, you can change the subtitle code page to view the subtitle file properly. 1. During playback, press INFO/MENU (m) to display the playback menu. 2.Use W/S to select the [Code Page] option. 3.Use A/D to select desired code option. 4.Use W/S/A/D to adjust the [Picture Mode] options. Select [Default] option then press ENTER (b) to reset the all video adjustments. 5.Use W/S/A/D to select the [Close] option, and press ENTER (b) to finish setting. 4. Press BACK (1) to exit the On-Screen display. 54 Operating Audio CD Recording You can record one desired track or all of the tracks in Audio CD to a USB storage device. 1. Insert a USB storage device to the USB port on the front panel. 2. Insert an Audio CD in the disc slot. The playback starts automatically. 3. Press INFO/MENU (m) to display the option menu. Or Press X REC button on the remote control. You can record all musics in the audio CD. 4.Use W/S to select [CD Recording] option, and press ENTER (b). 5.Use W/S to select a track you wish to copy on the menu, and press ENTER (b). 4 Repeat this step to select tracks as many as you can. Operating Selects all the tracks on an Audio CD. Selects an encoding option from the pop-up menu (128kbps, 192kbps or 320kbps). Cancels the recording and returns to the previous screen. 6.Use W/S/A/D to select [Start], and press ENTER (b). 7.Use W/S/A/D to select a destination folder to be copied. If you want to create a new folder, use W/S/A/D to select [New Folder] and press ENTER (b). Enter a folder name using virtual keyboard, and press ENTER (b) while [OK] is selected. 8.Use W/S/A/D to select [OK], and press ENTER (b) to start Audio CD recording. If you want to stop in progressing Audio CD recording, press ENTER (b) while [Cancel] is highlighted. 9. A message appears when Audio CD recording is completed. Press ENTER (b) to check the audio file created in the destination folder. ,,Note yy The table below shows the average recording time from an music track with 4 minutes of playback time to a audio file with 192 kbps as an example. stop mode while playback 1 min. 4 min. yy Recording times in the table above are approximate. yy Actual recording time for USB storage device varies depending on the USB storage device’s ability. yy Make sure that there is minimum of 50 MB free space is needed when recording into the USB storage device. yy The length of the audio should be longer than 20 seconds for the proper recording. yy Do not turn off this player or extract the connected USB storage device during Audio CD recording. >>Caution The recording or copying features on this player are provided for your personal and noncommercial use. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. LG expressly disclaims any responsibility for illegal distribution or use of unauthorized content in commercial purpose. Be Responsible Respect Copyrights Operating 55 Playing the iPod You can enjoy the sound with your iPod. For details about iPod, refer to the iPod’s User Guide. Preparation Before connecting the iPod, turn this unit off and reduce the volume of this unit to its minimum. ,,Note Use the iPod cable supplied with your iPod. 1. Connect the iPod to the USB port. If you turn this unit on, your iPod is automatically turned on and recharging starts. When you connect the iPod on the HOME menu, the player plays a music automatically. 2. Select a file using W/S/A/D, and press ENTER (b) to play the file. 1. Connect the iPod to the USB port. 2.Press HOME ( ). 3. Select [Music] using A/D, and press ENTER (b). If you connected the other device (CD or USB), select the iPod on the menu. 4. Select a content using W/S/A/D, and press ENTER (b) to play. Power scroll You can search easily a content by power scroll on the screen. Select a power scroll using D and select the initial of the desired content. ,,Note If the iPod’s OSD language is selected to simple chinese, the power scroll function is not operated correctly. Enjoying the iPod IN mode You can operate your iPod by using the supplied remote control and controls on your iPod. 1. Connect the iPod to the USB port. If you turn this unit on, your iPod is automatically turned on and recharging starts. 2. Press FUNCTION to select iPod IN mode. W/S/A/D Selects an option in the menu. ENTER (b) Starts playback the music. M or d (PLAY) To pause while it is playing. To resume playing, press M or d (PLAY) again. (Press and hold) c/v Fast-forward or rewind a song C/V Skip the playback forward or backward . 4 Operating Enjoying iPod on the screen Press REPEAT (h) to select a desired repeat mode :Track (;), All (:), Shuffle All (l :), Shuffle (l), Off (No display) 56 Operating ,,Note yy An error message “CHECK” or “Connected iPod model is not supported.” appears when: -- your iPod is not available for the function to be operated. yy An error message “CHECK” or “Please update your iPod’s software.” appears when: -- your iPod has an old software version. /Update your iPod software to latest version. 4 Operating yy If this unit displays an error message, follow the message. An error message “CHECK” or “Please check your iPod.” appears when: -- the communication between this unit and your iPod is failed. /Connect & reconnect your iPod in this unit. -- your iPod is not connected firmly. -- this unit recognises your iPod as unknown device. yy Your iPod is exceptionally low on power. /The battery needs to be charged. /If you charge the battery while iPod is extremely low in power, it may take longer to charge. yy Compatibility with your iPod may vary depending on the type of your iPod. yy iPod touch, iPhone and iPad have any difference in operation other than iPod. You may need any additional control to use them with this unit. (e.g. “slide to unlock”) yy If you use an application, make a call, or send and receive SMS text message, etc. on iPod touch, iPhone or iPad, disconnect it from to the USB port of this unit and then use it. yy Depending on your iPod’s software version, it may not be possible to control your iPod from this unit. We recommend installing the latest software version. yy This unit supports the models as follows. - iPad nano 2G, 3G, 4G, 5G, 6G - iPod classic - iPod touch 1G, 2G, 3G, 4G - iPhone 3G, 3GS, 4, 4S - iPad, iPad2 yy If you have a problem with your iPod, please visit www.apple.com/support/ipod. Operating 57 Radio Operations Be sure that the antennas are connected. (Refer to the page 23) Listening to the radio 1. Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in. Deleting a saved station 1. Press PRESET (- / +) to select a preset number you want to delete. 2. Press CLEAR, the preset number will blink in the display window. 3. Press CLEAR again, to delete the selected preset number. Deleting all the saved stations 2. Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNING (-/+) repeatedly. Press and hold CLEAR for two seconds. “ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted. 3. Adjust the volume by pressing VOL (+/-). Improving poor FM reception Presetting the Radio Stations Press B (blue) (MONO/STEREO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception. You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 2. Select the desired frequency by using TUNING (-/+). 3. Press ENTER (b) a preset number will flash in the display window. 4. Press PRESET (-/+) to select the preset number you want. 5. Press ENTER (b). The station is stored. 6. Repeat the steps 2 to 5 to store other stations. Operating 1. Press FUNCTION until the TUNER (FM) appears in the display window. 4 58 Operating Using the Premium You can use various content services via Internet with the Premium feature. 1. Check the network connection and settings (page 26). 2.Press HOME ( ). 3. Select the [Premium] using A/D, and press ENTER (b). 4. Select an on-line service using W/S/A/D, and press ENTER (b). 4 ,,Note Operating yy Detailed information of each service, contact to the content provider or visit suppot link of the service. yy The content of Premium services and service related information, including user interface, is subject to changes. Please refer to the web site of each service for most upto-date information. yy Using Premium features with wireless network connection may result in improper streaming speed by interference from household devices that are using radio frequencies. yy When you are first time to access [Premium] feature, current country setting appears. If you want to change the country setting, select [EDIT] and press ENTER (b). Operating 59 Using Bluetooth technology About Bluetooth Bluetooth® is wireless communication technology for short range connection. The available range is within 10 meters. (The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms.) Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. Available Devices : Mobile phone, MP3, Laptop, PDA In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. This unit is compatible with following profile. A2DP (Advanced Audio Distribution Profile) Pairing your unit and Bluetooth device Before you start the pairing procedure, make sure the Bluetooth feature is turned on in to your Bluetooth device. Refer to your Bluetooth device’s user guide. Once a pairing operation is performed, it does not need to be performed again. 1. Select the Bluetooth function by using the FUNCTION. Appears “BT READY” in display window. 2. Operate the Bluetooth device and perform the pairing operation. When searching for this unit with the Bluetooth device, a list of the devices found may appear in the Bluetooth device display depending on the type of Bluetooth device.Your unit appears as “LG Audio”. 3. When this unit successfully paired with your Bluetooth device, Bluetooth LED of this unit lights up and "BTPAIRED" appears in the display window. ,,Note Depending on the Bluetooth device type, some device have a different pairing way. 4. Listen to music. To play a music stored on your Bluetooth device, refer to your Bluetooth device’s user guide. ,,Note If you change the function of the unit, the Bluetooth function is disconnected, operate pairing again. 4 Operating Bluetooth Profiles Listening to music stored on the Bluetooth devices 60 Operating ,,Note yy The sound may be interrupted when the connection interfered by the other electronic wave. yy You cannot control the Bluetooth device with this unit. yy Pairing is limited one Bluetooth device per one unit and multi-pairing is not supported. yy Although the distance between your Bluetooth and the set is less than 10m, there are obstacles between both, your Bluetooth device cannot be connected. yy Depending on the type of the device, you may not be able to use the Bluetooth function. yy When not connected the Bluetooth, “BT READY” appears on the display window. 4 Operating yy The Electrical malfunction due to devices using same frequency such as Medical equipment, Microwaves or wireless LAN devices, the connection will be disconnected. yy When someone stands and interrupts communication between Bluetooth device and the player, the connection will be disconnected. yy If the gotten away of the distance between Bluetooth and the unit, the sound quality is lower and lower the connection will disconnect when the space between the Bluetooth and the unit gets out of the operating range of Bluetooth. yy The device with Bluetooth wireless technology is disconnected, if you turn off the main unit or put the device away from the main unit more than 10m. Troubleshooting 61 Troubleshooting General Symptom Cause & Solution The Power does not turned on. yy Plug the power cord into the wall outlet securely. The unit does not start playback. yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Insert the disc with the playback side down. yy Clean the disc. yy Cancel the Rating function or change the rating level. The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or music files. yy The files are not recorded in a format that the unit can play. The remote control does not work properly. yy The remote control is not pointed at the remote sensor of the unit. yy The unit does not support the codec of the movie file. yy The remote control is too far from the unit. yy There is an obstacle in the path of the remote control and the unit. yy The batteries in the remote control are exhausted. The unit is not operating normally. You can reset the unit as follows. yy Unplug the power cord, wait at least five seconds, and then plug it in again. 5 Troubleshooting The unit is plugged in, but the power will not turn on or off. 62 Troubleshooting Network Symptom Cause & Solution BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 26). yy Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. yy The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such as YouTube™, etc.) are often stopped or “buffer” during playback. yy Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. Shared folder or files from your PC or a Media servers are not displayed on the device list. yy The firewall or anti-virus software on your media server is running. Turn off the firewall or anti-virus software running on your media server. yy The player is not connected to the local area network that your media server is connected. 5 Troubleshooting Cannot connect the player to the access point or wireless LAN router. yy The wireless communication may be interrupted from household devices that are using radio frequencies. Move the player away from them. Access point is not displayed on the “Access point name” list. yy The access point or wireless LAN router may not broadcast its SSID. Set your access point to broadcast its SSID through your computer. yy Your network device such as access point may not set with available frequency range and channel that this player can support. Try setting the frequency range and channel on the network device setting. Troubleshooting 63 Picture Symptom Cause & Solution There is no picture. yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts. yy The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection. Picture noise appears yy You are playing a disc recorded in a colour system that is different from your TV. yy Set the resolution which your TV accepts. Blu-ray 3D disc playback does not output 3D views. yy Connect the player to your TV with HDMI cable (Type A, High Speed HDMI™ Cable with Ethernet). yy Your TV may not support “HDMI 3D mandatory format”. yy The [3D Mode] option in the [Setup] menu is set to [Off ]. Set the option to [On]. Sound 5 Cause & Solution There is no sound or the sound is distorted. yy The unit is in scan, slow motion, or pause mode. yy The sound volume is low. yy Check the speaker cable connection. (page 17) Customer Support You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://www.lg.com/global/support or contact LG Electronics customer care centre. Open source software notice To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are available to download with the source code. Troubleshooting Symptom 64 Appendix Controlling a TV with the Supplied Remote Control You can control your TV using the buttons below. By pressing You can 1 (TV POWER) Turn the TV on or off. AV/INPUT Switch the TV’s input source between the TV and other input sources. PR/CH W/S Scan up or down through memorized channels. VOL +/– Adjust the volume of the TV ,,Note 6 Depending on the unit being connected, you may not be able to control your TV using some of the buttons. Setting up the remote to control your TV You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code Number LG 1(Default), 2 Zenith 1, 3, 4 GoldStar 1, 2 Samsung 6, 7 Sony 8, 9 Hitachi 4 2. Release the 1 (TV POWER) button to complete setting. Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Appendix Appendix 65 Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Option 1: 1. The update menu will appear on the screen when you turn off the player. 2.Use A/D to select a desired option and then press ENTER (b). Software Update You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. ,,Note yy Before updating the software in your player, remove any disc and USB Device from the player. yy Before updating the software in your player, turn the player off and then turn it back on. yy During the software update procedure, do not turn off the player or disconnect AC power, or do not press any button. yy If you cancel the update, turn off the power and turn it on for stable performance. yy This unit cannot be updated to previous software version. 1. Check the network connection and settings (��������� page ���). 2. Select [Software] option in the [Setup] menu then press ENTER (b). 3. Select [Update] option, and press ENTER (b). [OK] Starts the software update. [Cancel] Exits the update menu and turns the power off. 6 If the software update is available from the update server, the “Update” icon appears in the Home menu. Press blue (B) colored button to start the update procedure. The player will check for the newest update. ,,Note yy Pressing ENTER (b) while checking for the update will end the process. yy If there is no update available, the Message, “No update is found.” appears. Press ENTER (b) to return to the [Home Menu]. Appendix Option 2: 66 Appendix 4. If newer version exists, the message “Do you want to download it?” appears. 5. Select [OK] to start update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable. To update software the next time, the software update procedure has to be started from the beginning again.) >>Caution Do not turn off the power during the software update. 9. When update is completed, the power will be turned automatically in a few seconds. 10.Turn the power back on. The system now operates with the new version. ,,Note 6 Appendix The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Centre then update your player. Refer to “Customer Support” on page 63. Appendix 67 About Nero MediaHome 4 Essentials Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatiable digital media server. ,,Note yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not be inserted in this player or in any product other than a PC. yy The supplied Nero MediaHome 4 Essentials CD-ROM is a customized software edition only for sharing files and folders to this player. yy The supplied Nero MediaHome 4 Essentials software does not support following functions: Transcoding, Remote UI, TV control, Internet services and Apple iTunes System Requirements Windows PC yy Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® 7 (no Service Pack required), Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003 yy Windows Vista® 64-bit edition (application runs in 32-bit mode) yy Windows® 7 64-bit edition (application runs in 32-bit mode) yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone yy 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors yy Memory: 256 MB RAM yy Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16bit color settings yy Windows® Internet Explorer® 6.0 or higher yy The supplied Nero MediaHome 4 Essentials software can be downloaded at http://www. lg.com/global/support. Find the download link on the web page of this product. yy DirectX® 9.0c revision 30 (August 2006) or higher yy This manual explains operations with the English version of Nero MediaHome 4 Essentials as examples. Follow the explanation referring to the actual operations of your language version. yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard) yy Network environment: 100 Mb Ethernet, WLAN Macintosh yy Macintosh computer with an Intel x86 processor yy Memory: 256 MB RAM 6 Appendix yy Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome standalone 68 Appendix Installing Nero MediaHome 4 Essentials Windows Start up your computer, and insert the supplied CDROM disc into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. To install Nero MediaHome 4 Essentials, proceed as follows: 1. Close all Microsoft Windows programs and exit any anti-virus software that may be running. 2. Insert the supplied CD-ROM disc into your computer’s CD-ROM drive. 3. Click [Nero MediaHome 4 Essentials]. 4. Click [Run] to start installation. 5. Click [Nero MediaHome 4 Essentials]. The installation is prepared and the installation wizard appears. 6. Click the [Next] button to display the serial number input screen. Click [Next] to go to the next step. 7. If you accept all conditions, click [I accept the License Conditions] check box and click [Next]. Installation is not possible without this agreement. 8. Click [Typical] and click [Next]. The installation process is started. 6 9. If you want to take part in the anonymous collection of data, select the check box and click the [Next] button. Appendix 10.Click the [Exit] button to complete the installation. Mac OS X 1. Start up your computer, and insert the supplied CD-ROM disc into your computer’s CD-ROM drive. 2. Browse the CD-ROM drive and open the “MediaHome_4_Essentials_MAC” folder. 3. Double-click the “Nero MediaHome.dmg” image file. The Nero MediaHome window is opened. 4. In the Nero MediaHome window, drag the Nero MediaHome icon either to the Applications folder within the window or to any other desired location. 5. You can now start the application by doubleclicking the Nero MediaHome icon in the location you dragged it to. Sharing files and folders On your computer, you must share the folder contained movie, music and/or photo content to play them on this player. This parts explains the procedure for selecting the shared folders on your computer. 1. Double-click the “Nero MediaHome 4 Essentials” icon. 2. Click [Network] icon on the left and define your network name in the [Network name] field. The Network name you enter will be recognized by your player. 3. Click [Shares] icon on the left. 4. Click [Local Folders] tab on the [Shares] screen. 5. Click [Add] icon to open the [Browse Folder] window. 6. Select the folder containing the files you want to share. The selected folder is added to the list of shared folders. 7. Click [Start Server] icon to start the server. ,,Note yy If the shared folders or files are not displayed on the player, click the folder on the [Local Folders] tab and click [Rescan Folder] at the [More] button. yy Visit www.nero.com for more information and software tools Appendix 69 Area Code List Choose an area code from this list. AreaCode AreaCode AreaCode AreaCode Afghanistan AF Fiji FJ Monaco MC Singapore SG Argentina AR Finland FI Mongolia MN Slovak Republic SK Australia AU France FR Morocco MA Slovenia SI Austria AT Germany DE Nepal NP South Africa ZA Belgium BE Great Britain GB Netherlands NL South Korea KR Bhutan BT Greece GR Antilles AN Spain ES Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK Brazil BR Hong Kong HK Nigeria NG Sweden SE Cambodia KH Hungary HU Norway NO Switzerland CH Canada CA India IN Oman OM Taiwan TW Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR Colombia CO Italy IT Paraguay PY Uganda UG Congo CG Jamaica JM Philippines PH Ukraine UA Costa Rica CR Japan JP Poland PL United States US Croatia HR Kenya KE Portugal PT Uruguay UY Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX LY Russian LU Federation Vietnam RU Zimbabwe SA SN TH VN ZW 6 Appendix 70 Appendix Language code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. 6 Appendix LanguageCode LanguageCode LanguageCode LanguageCode Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368 Afrikaans 6570 Frisian 7089 Macedonian 7775 Singhalese 8373 Albanian 8381 Galician 7176 Malagasy 7771 Slovak 8375 Amharic 6577 Georgian 7565 Malay 7783 Slovenian 8376 Arabic 6582 German 6869 Malayalam 7776 Spanish 6983 Armenian 7289 Greek 6976 Maori 7773 Sudanese 8385 Assamese 6583 Greenlandic 7576 Marathi 7782 Swahili 8387 Aymara 6588 Guarani 7178 Moldavian 7779 Swedish 8386 Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tagalog 8476 Bashkir 6665 Hausa 7265 Nauru7865 Tajik 8471 Basque 6985 Hebrew 7387 Nepali 7869 Tamil 8465 Bengali; Bangla 6678 Hindi 7273 Norwegian 7879 Telugu 8469 Bhutani 6890 Hungarian 7285 Oriya 7982 Thai 8472 Bihari 6672 Icelandic 7383 Panjabi 8065 Tonga 8479 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Turkish 8482 Bulgarian 6671 Interlingua 7365 Persian 7065 Turkmen 8475 Burmese 7789 Irish 7165 Polish 8076 Twi 8487 Byelorussian 6669 Italian 7384 Portuguese 8084 Ukrainian 8575 Chinese 9072 Japanese 7465 Quechua 8185 Urdu 8582 Croatian 7282 Kannada 7578 Rhaeto-Romance 8277 Uzbek 8590 Czech 6783 Kashmiri 7583 Rumanian 8279 Vietnamese 8673 Danish 6865 Kazakh 7575 Russian 8285 Volapük 8679 Dutch 7876 Kirghiz 7589 Samoan 8377 Welsh 6789 English 6978 Korean 7579 Sanskrit 8365 Wolof 8779 6979 Kurdish 7585 Scots Gaelic 7168 Xhosa 8872 Estonian 6984 Laotian 7679 Serbian 8382 Yiddish 7473 Faroese 7079 Latin 7665 Serbo-Croatian 8372 Yoruba 8979 Fiji 7074 Latvian, Lettish 7686 Shona 8378 Zulu 9085 Finnish 7073 Lingala 7678 Esperanto Appendix 71 Trademarks and Licenses Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. Java is a trademark of Oracle and/or its affiliates. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. 6 “Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Appendix Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. The Wi-Fi Protected Setup Mark is a trademark of the Wi-Fi Alliance. 72 Appendix Cinavia Notice DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. range of 10 meters. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG Electronics is under license. Other trademarks and trade names are those of their respective owners. 6 This product uses Cinavia technology to limit the use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted. More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA. This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited. Appendix Appendix 73 Audio Output Specifications Jack/Setting Source HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 BitStream *1 *2 Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 5.1ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 5.1ch DTS Dolby TrueHD DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 5.1ch Linear PCM 7.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 7.1ch *1 The secondary and interactive audio may not be included in the output bitstream if [Digital Output] option is set to [BitStream]. (Except LPCM Codec : the output always include interactive and secondary audio.) *2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [Digital Output] option is set to [BitStream]. yy With digital audio connection (HDMI OUT), Disc Menu button sounds of BD-ROM may not be heard if the [Digital Output] option is set to [BitStream]. yy If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. yy Multi-channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder. yy This setting is not available on the input signal from an external device. 6 Appendix *3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz and 5.1Ch. If the [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the original audio is outputted for the other discs (like [BitStream]). yy The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback. 74 Appendix Specifications General Power requirements Refer to main label on the rear panel. Power consumption Refer to main label on the rear panel. Dimensions (W x H x D) Approx. 440 X 65 X 297 mm Net Weight (Approx.) 3.3 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI IN/OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL IN (OPTICAL) 3 V (p-p), Optical jack x 1 PORT. IN 0.5 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz Amplifier Power output, (RMS), THD 10 % 6 Appendix Total 1100 W Front 140 W x 2 Center 140 W Rear 180 W x 2 Sub-Woofer 180 W (Passive) 3D Effect -Left 70 W 3D Effect -Right 70 W Wireless receiver Power requirements Refer to main label on the wireless receiver Power consumption Refer to main label on the wireless receiver External dimensions (WxHxD) 60 X 220 X 175 mm Net Weight 0.9 kg Appendix 75 System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard PAL/NTSC color TV system Frequency response 20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling) Harmonic distortion Less than 0.05 % Dynamic range More than 80 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Wireless LAN (internal antenna) Integrated IEEE 802.11n (2.4 GHz band) wireless networking access, compatible with 802.11b/g Wi-Fi networks. Bus Power Supply (USB) DC 5 V 0 2.1 A Speakers Front speaker (Left/ Right) Type 2 Way 3 Speaker Max. Input power 280 W Impedance Rated 4Ω Net Dimensions (W x H x D) 280 x 1330 x 280 mm Input Power 140 W Net Weight 5.5 Kg Rear speaker (Left/ Right) Type 2 Way 3 Speaker Max. Input power 360 W Impedance Rated 4Ω Net Dimensions (W x H x D) 280 x 1330 x 280 mm Input Power 180 W Net Weight 5.5 Kg Type 2 Way 3 speaker Max. Input power 280 W Impedance Rated 4Ω Net Dimensions (W x H x D) 412 x 82 x 73 mm Input Power 140 W Net Weight 1.4 kg 1 Way 1 Speaker Max. Input power 360 W Impedance Rated 3Ω Net Dimensions (W x YYH x D) 251 x 336 x 347 mm Input Power 180 W Net Weight 6.3 Kg 1 Way 2 Speaker Max. Input power 140 W Impedance Rated 4Ω Net Dimensions (W x H x D) Built in the front speakers Input Power 70 W Net Weight Center speaker Type Top speaker (Front left and right speakers) Type yy Design and specifications are subject to change without notice. Appendix Subwoofer 6 76 Appendix Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface. yy Do not leave rubber or plastic products in contact with the unit for a long period of time. Maintaining the Unit 6 Appendix The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center. Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc. Storing Discs After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight. Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Appendix 77 Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated. The availability of and access to Content and Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services. Should you have any inquiry or problem related to the Content or Services, you may refer to the Service Provider’s website for the most up-todate information. LGE is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service Providers. 6 Appendix Please note that LGE is not responsible for any Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.