LG | FA-3000AWE | LG FA-3000AWE Owner’s Manual

FA-3000AWE JA3ULLP
DOLBY DIGITAL HOME
CINEMA SYSTEM
OWNER'S MANUAL
MODEL
:
FA-P3000
(Speakers: FE-3000TE, FA-3000AWE)
Before
connecting, operating
please
read this instruction booklet
or
adjusting this product,
carefully and completely.
Safety
Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
magnitude
to constitute
a
risk of electric
shock to persons.
The exclamation
point
is intended to alert the
important operating
within
user
an
equilateral triangle
to the presence of
and maintenance
(servicing)
accompanying the
instructions in the literature
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
CLASS 1
KLASSE 1
LASER PRODUCT
LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1 PRODUIT LASER
CAUTION:
To
ensure
manual
proper
carefully
SERIAL NUMBER: The serial number is found
use
of this
product, please
and retain for future
require maintenance, contact
service procedure.
an
read this owner's
reference, should the unit
authorized service location-
see
Use of
controls, adjustments
other than those
specified
the
performance
of
procedures
herein may result in hazardous
radiation exposure.
The
apparatus shall
splashing and that
shall be placed on
2
not be
no
the
exposed to water, dripping or
objects filled with liquids, such as vases,
apparatus.
the back of
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
or
on
this unit. This number is
Serial No.
___________________________________
___________________________________
to
Before Use
Table of Contents
SafetyPrecautions.........................2
Precautions
TableofContents..........................3
BeforeUse................................3
Precautions.............................3
.3
AbouttheSymbolsforinstructions.
Diagramsofequipment......................4
.
.
.
.
.
.
.
.
.
.
FrontView..............................4
RearView..............................4
the unit
Handling
When
shipping the unit
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
The
Display................................4
RemoteControl..........................4
To
SpeakerSettings...........................5
Connections.............................6-7
near
SpeakerSystemConnection................6
.7
ConnectingtoOptionalEquipment.
Display Information about External Digital Input
Signal.................................7
SpeakerSetup.............................8
DelayTimeSetting........................8
MiniGlossaryforSoundMode................9
SoundAdjustment.........................10
.
.
.
.
.
.
.
.
.
the surface clean
keep
Do not
volatile
use
such
liquids,
as
insecticide spray,
the unit. Do not leave rubber of
contact with the unit for
leave marks
a
long period
plastic products in
of time. They will
the surface.
on
.
SoundMode...........................10
SoundLevel............................10
Mute.................................10
TestTone..............................10
SleepTimerSetting......................10
Selectinginputsource....................10
BeforeRequestingService..................11
Specifications............................11
Installing
Do not install the unit in
bookcase
as a
Allow
adequate air circulation to prevent internal heat
buildup.
Do not place the unit on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
Do not install the unit
heat
near
sources
such
as
radi-
ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.
ators
air
or
Do not
place heavy objects
To clean the cabinet
?Audiocable..........................1
Use
a
use a
on
the unit.
the unit
Cleaning
Accessories
?Speakercables.......................5
?Speakers............................5
?Batteries(AAA).......................2
confined space, such
a
built-in cabinet.
or
soft, dry cloth. If the surfaces
soft cloth
solution. Do not
benzine,
or
lightly
use
thinner,
are
moistened with
a
extremely dirty,
detergent
mild
strong solvents, such
as
these
as
might damage
alcohol,
the surface
of the unit.
?Remotecontrol.......................1
About the
symbols
Indicates hazards
itself
Remote Control
harm to the unit
likely to cause
damage.
other material
Indicates
special operating
Indicates
tips
and hints for
features of this unit.
making
the task easier.
Operation Range
Point the remote control at the remote
sensor
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished
works. Copyright 1992-1997 Dolby Laboratories. All rights
and press the
"Dolby",
buttons.
Distance: About 23 ft
(7 m)
from the front of the remote
sensor
About 30° in each direction of the front of the remote
Angle:
or
for instructions
"Pro
reserved.
sensor
Remote control
battery installation
Detach the battery
remote
AAA AAA
Manufactured under license from
cover on
control, and insert
AAA) batteries
rectly.
with
the
rear
two R03
and
of the
(size
aligned
cor-
batteries
pending.
batteries. Never mix different
Systems,
"DTS" and "DTS
1996, 2000
new
Theater
Digital Surround" are registered
Systems, Inc. Copyright
Theater
Digital
Systems, Inc. All rights
trademarks of Digital Theater
Caution
Do not mix old and
Digital
Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380,
5,978,762 and other world-wide patents issued and
types
of
reserved.
(standard, alkaline, etc.).
3
of
Diagrams
equipment
Front View
Remote control
POWER button &
Indicator
A. TV control buttons
brand only)
Display
Standby
Window
CHANNEL(+/-) buttons
VOLUME(+/-) buttons
A
POWER button
INPUT
Select
button
Subwoofer
AV INPUT button
MUTE button
VOLUME
( / ) buttons
Speaker
(LG
B. AUDIO control buttons
MUTE button
B
POWER button
SLEEP button
FUNCTION button
DELAY button
TEST TONE button
LEVEL button
SOUND MODE button
C
Rear View
BY-PASS button
DOLBY PRO LOGIC II
RESET button
button
COAXIAL INPUT
Connector
CURSOR(D/E/F/G)
VOLUME
OPTICAL
INPUT
Connector
AUXILIARY
Connectors
but-
tons
buttons
(+/-)
C. DVD control buttons
SET UP button
POWER button
CURSOR(D/E/F/G)
but-
tons
VOLTAGE
Selector
ENTER button
AUDIO button
(Optional)
DISPLAY button
SUB TITLE button
SPEAKER
Connectors
RL
STOP button
POWER
Cord
()
PAUSE button
PLAY button
/
SKIP(
Using the
RESET button
This button is used to solve the
?
When the power
outlet.
?
When the window
?
-
not on,
can
problem
even
as
following symptom;
if power cord is connected to the
display does not display.
When the unit does not operate normally.
Unplug and press the RESET button by using
buttons
TV with the remote control
The remote control
can
operate your TV's functions.(LG brand
only)
a
pencil
or
ball-pen.
Hold POWER and press CHANNEL+ button
on or off.
MUTE indicator
until
DVDs with the remote control
The remote control
SLEEP indicator
repeatedly
turn the TV
Controlling
Display
Sound mode
indicator
Controlling
)
can
operate your DVD's functions.
Hold POWER and press CURSOR(C:
until turn the DVD on or off.
D)
button
repeatedly
Brand of controllable DVDs:
LG, JVC, Hitachi, Panasonic, SSE, Phillips, Sharp, Sony,
Toshiba.
Delay
time/Sound
mode/Sleep
Test tone etc. Indicators
4
time/
Speaker Positioning
In the
?
?
case
of normal
position
use
the 5
speakers (2
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Center
the
front
speakers
speakers,
for
equal
center
speaker
distance. And
and 2
rear
speakers).
by hearing position
set up the
speaker
It is ideal that the center
speakers
and front
speakers
are same
height.
But
normally place
it above
or
below the
television.
?
Rear
speakers
right
surround playback.
Place left and
them at
ceiling
In the
or
For best
listening
results, do
area.
case
of
a
disperse
smaller
set the
rear
These
speakers recreate sound motion and atmosphere required for
rear speakers too far behind the listening position and install
is also effective to direct the rear speakers towards a wall or
not install the
above the level of the listener's
to further
other, and
behind the
ears.
It
the sound.
room
size, if the audience is
speakers
above 60
-
90
cm
near
Center
Front
Rear
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Speaker
Front
Speaker
(Right)
Speaker
(Left)
Rear Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
5
Connections
Speaker System Connection
Connect the
speakers using the supplied speaker cords by matching the colors of the terminals and those
possible surround sound, adjust the speaker parameters (distance, level, etc.).
of the
cords. To obtain the best
Notes
Be
sure
to match the
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
are
reversed,
the sound will be distorted and will lack base.
If you use front speakers with low maximum input rating,
Do not disassemble the front cover of supplied speaker.
6
adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
Connections
Connecting
Connecting
to
Connect Left and
OUT
jacks
Connect
the
Optional Equipment
to
amplifier
Right
of the
with two-channel
analog
stereo or
Dolby Surround
AUX INPUT
your DVD
on
one
(Cont'd)
jacks on the Dolby Digital Home Cinema System
player, Digital Device or stereo system by the supplied audio
into the Audio Left and
cables
Right
(A).
Dolby Digital Home Cinema System DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL C) to
jack on your DVD player, Digital Device or Stereo system. Use an optional digital (optical O or
out
corresponding
C) audio cable.
coaxial
Display
This
display
Information about External
appears
depending
UNLOCK DISPLAY
CHANNEL DISPLAY
on
the
change
Digital Input Signal
of the external
digital input signal.
appears when the problem gets in external digital input while normally operating in optical or coaxial function. It could be displayed instantaneously according to the external
system quality while operating in switching audio
or
appears when Audio coding mode is changed
or the function mode is switched.
when the stream information is
or
in
skip,
open and channel
up/down.
changed
1+1
ch1, ch2
1/0
C
2/0
L,R
3/0
L,R,C
2/1
L, R, S(Mono Surround)
2/2
L,R,Ls,Rs
3/1
L, R, C, S(Mono Surround)
3/2
L,R,C,Ls,Rs
.1
LFE
signal,
no
LFE
signal
7
Speaker Setup
Delay
In
Time
Dolby Digital
Center
Setting
or
Dolby
Pro
Logic
mode it is assumed
that the distance from the listener to each of the
ers
is
equal.
center
If not then
or rear
neously by
setting
speakers
the
delay
speak-
times of the
the sound will be heard simulta-
The interval from the
speakers
to the listener. If the dis-
time
setting
(Dolby Digital mode only)
If the distance of DF is
equal to the distance of DC in
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the table
the left
below.
Ex)
the listener.
delay
er
If the distance from the front
speakers to the listenspeaker to the listener is
is 3m and from the center
speakers is same, in the
Dolby Digital
Dolby
Logic mode the delay time
of each speakers is as following.
2.4m, the
center
3m
2.4m
In
Setting the delay time in the Dolby
Digital and Dolby Pro Logic (II) mode
tance from the listener to each
and
Pro
Dolby Digital mode
delay time : 0 5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot setting
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be automatically set.
The delay time is 1 msec per 30 cm.
If the center and rear speakers are further than the front
speakers from the listener, the delay time will be at minCenter
~
~
imum.
Surround
delay
time
If the distance of DS is
equal
to
=
=
=
(A)
L
2
3
time is 2msec.
delay
(DC)
60cm
=
/ 30cm
(A)
2msec
=
Press DELAY.
The current surround
play
window.
You
can
in the
/
setting
to
is
delay time by pressing
only.
/
mode
Dolby Digital
Press
If
select center
time appears in the dis-
delay
change
the
time.
delay
complete, press
DELAY.
R
C
DC
Notes
or
set the Surround
-
1
-
setting
longer than the DF in
figure,
Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener is
3 m and from rear speakers from the listener is 1.5 m,
in the Dolby Digital mode the rear delay time is 5 msec.
3m (DF)
1.5m (DS)
1.5m (B)
1.5m (B)
150cm / 30cm
5msec
the left
(DF)
60cm (A)
DF
You
adjust the center delay time only
delay time appears.
can
in the
Dolby Digital
mode and its
Center Width (MUSIC
mode of
Dolby
Pro
II
Logic
only)
This control allows center-channel sounds to be
posispeaker and the left/right
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage presentation, and is recommended for most recordings. Step
"0" places all center sound in the center speaker. Step
"7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
tioned between the center
SW
DIMENSE (MUSIC
DS
SL
SR
(B)
mode of
This control allows the
user
Dolby
to
Pro
Logic
II
only)
gradually adjust
soundfield either towards the front
or
the
rear.
the
This
can
be useful to
In
Dolby Pro Logic II (Surround delay time):
Logic: 10 25msec
Pro
~
Movie: 10
Music: 0
~
~
25msec
15msec
Virtual: cannot
Matrix: 0
~
setting
15msec
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound forward, and steps --1, --2, and
--3
move
the sound
towards the surrounds.
PANORAMA (MUSIC
mode of
Dolby
This control extends the front stereo
Pro
Logic
II
only)
to include
image
speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
the surround
elements in the
tuated
8
by
mix,
as
these
are
the Panorama process.
detected and
accen-
Mini
for Sound Mode
Glossary
Allows you to enjoy 5.1(or 6) discrete channels of high quality digital audio from DTS program sources bearing the
trademark such as discs, DVD and compact discs, etc. DTS Digital Surround delivers up to 6 channels of transpar-
audio(which means identical to the original masters) and results in exceptional clarity throughout a true 360
degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS
Technology, LLC.
ent
The
surround format lets you
Dolby Digital
program source. If you play DVDs with
cy, and improved dynamic range.
When
playing recordings
"
enjoy
"
of live music and
up to 5.1 channels of
mark, you
can
enjoy
digital
even
classic, this mode provides
a
surround sound from
better sound
feeling
a Dolby Digital
quality, greater spatial accura-
similar to
actually being
in
a
small
concert hall.
When
playing recordings
of live music and
classic, this mode provides
a
feeling
similar to
actually being
in
a
large
con-
cert hall.
This mode
provides
a
three dimensional effect similar to that of movie theater.
(II)
Logic II creates five full-bandwidth output channels from two-channel sources. This is done using an
advanced, high-purity matrix surround decoder that extracts the spatial properties of the original recording without
adding any new sounds or tonal colorations.
Pro
Dolby
PRO LOGIC mode:
The Pro
users the same robust surround processing as original Pro Logic, in case
optimum quality, or if there is a desire to hear the program more "as it used to be."
When this mode is used, it is called Pro Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation mode is optional. Dolby does not require PLII products to use the original Pro Logic decoding algorithm.
However, if the DSP contains the original Pro Logic code, and if the product maker would like to use it, this is
quite acceptable and even encouraged. A product must not offer both original Pro Logic and the Pro Logic emula-
the
Logic
source
Emulation mode offers
content is not of
tion mode.
MOVIE mode:
The Movie mode is for
is enhanced soundfield
use
with stereo television shows and all programs encoded in Dolby Surround. The result
that approaches the quality of discrete 5.1-channel sound.
directionality
MUSIC mode:
The Music mode is for
use with any stereo music recordings, and provides a wide and deep sound space. The
Music mode includes controls that allow the sound to be tailored to individual listening tastes.
VIRTUAL mode:
The Virtual mode is
a virtual process for speaker use. However,
produce the intended result. For those virtualizers,
Movie mode may give the best surround effect. Virtual mode is designed to be used with the virtual process
developed by Dolby Laboratories. The Pro Logic II mode should be called only "Pro Logic II" so the Virtual name
can be reserved to describe the speaker virtualization process itself.
there
might
be
usually
some
used when Pro
Logic
II is connected to
virtualizers for which this mode does not
MATRIX mode:
The Matrix mode is the
same as
the Music mode
except that the directional enhancement logic is turned off. It
may be used to enhance mono signals by making them seem "larger." The Matrix mode may also find use in auto
systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals
from
a
logic
decoder. The ultimate "cure" for poor FM stereo
SURROUND OFF
reception
may be
simply
to force the audio to
mono.
(2CH STEREO)
Outputs the sound from the front left and right speakers and subwoofer. Standard two channel (stereo) sources
completely bypass the sound field processing. This allows you to play any source using only the front left and right
speakers and subwoofer. You can select SURROUND OFF by pressing BY-PASS on the remote control.
9
Sound
Adjustment
Sound Mode
Test Tone
When PCM indicator is
display
This function allows you can easily adjust the sound
balance of the speakers from the listener's position.
in the
only displayed
window:
Each time you press SOUND MODE button,
mode is changed as the following order;
PRO LOGIC
HALL1
→
→
HALL2
→
the sound
1
Select the test tone mode
?
THEATER
by pressing
A hiss noise
comes
out for 2 seconds from each
→
→
→
,
button, the sound mode of Pro
2
You
Tip
select SURROUND OFF
can
pressing
mode
(2CH STEREO)
3
the sound level
during operating
from the listener's
position.
?
During operating the test tone, if you adjust the sound
level, it will be paused in the current speaker channel.
If
setting
by
BY-PASS button.
adjust
can
/
the test tone, first press LEVEL then press
buttons, so that all speaker's sound level is
same
You
→
→
→
following order;
PRO LOGIC → MOVIE → MUSIC → VIRTUAL → MATRIX
speak-
in the
following order;
FL (Front Left)
C (Center)
FR (Front Right)
SR (Surround Right)
SL (Surround Left)
SW (Subwoofer)
FL (Front Left)
ers
Each time you press
Logic II is changed as the
TEST
TONE.
is
complete, press
TEST TONE.
For your reference
?
You
identify the encoding format
by looking at its packaging.
Dolby Digital discs are labeled with the
Dolby Surround encoded programs are
the
logo.
DTS Digital Surround discs are marked
can
of program
software
-
-
-
logo.
labeled with
with DTS.
Sleep
Timer
You
set the Surround Sound
can
automatically
1
You
1
2
can
2
set the sound level of the desired channel.
a
specified
System
sleep
sleep
time.
time appears in the dis-
window.
Each time you press SLEEP the
in the following order.
setting changes
SLEEP120→90→60→50→40→30→20→10→OFF
Press LEVEL.
The level indicator will appear in the
Press
/
to select
Each time you press the
a
desired
/
display
Note
window.
You
to set.
speaker
button, it is changed
the
as
following order;
FL
C (Center)
FR (Front Right)
(Front Left)
SR (Surround Right)
SL (Surround Left)
SW (Subwoofer)
FL (Front Left)
On the 2 channel stereo mode, you can only select
SW (Subwoofer).
→
→
→
/
adjust the
channel. (-6dB
to
the
sound level of the
3
+6dB)
adjust
4 Repeat step
5 setting complete, press
selected
2-3 and
~
the sound level of
the other channels.
If
is
check the time
remaining before the
System turns off.
The remaining time appears in the
Press SLEEP.
window.
→
?
Press
can
Surround Sound
display
→
→
LEVEL.
Selecting input
source
You
other units connected to the AUX
DVDs
can use
or
COAXIAL INPUT
INPUT(R/L),
nector. Refer to the
or
OPTICAL INPUT
owners
manual
Each time you press this button, the mode of the funcchanges in the following sequence:
tion
ANALOG: for
selecting the analog signal
(R/L) Connectors.
Press MUTE to mute your unit.
can mute your unit in order, for
You
telephone,
OPTICAL: for
example,
con-
supplied with the
unit for further information on the operation.
Press INPUT SELECT repeatedly on the front panel
or press FUNCTION repeatedly on the remote control to select the desired input source.
Mute
the
to turn off
time.
Press SLEEP to set the desired
The SLEEP indicator and
play
Sound Level
at
Setting
to
"MUTE" indicator flashes in the
answer
display
selecting
from AUX INPUT
the
digital signal
from OPTICAL IN
the
digital signal
from COAXIAL IN
Connector.
COAXIAL: for
window.
selecting
Connector.
Note
The
Optical input function is available only when
Sampling Frequency is 32 48kHz.
other unit's
10
~
the
Requesting Service
Before
Cause
Symptom
Correction
?
Speaker cords
securely.
?
The volume control is set to 0.
Sound level is too low.
?
Speaker cords
correctly.
Power is not
?
The power cord is not
?
The remote control is not
No sound.
even
though
supplied
not connected
are
not connected
are
plugged
in.
?
Connect them
?
Turn the VOLUME control to the
right.
?
Connect them correctly, that is L
L, R (right) to R.
(left)
?
Plug
securely.
the power cord into
an
to
AC outlet.
the
POWER/ON STANDBY
button is
pressed
in.
The remote control
does not work
properly.
remote
?
at the
pointed
?
of this unit.
sensor
The remote control is too far from this
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
There is
an
Point the remote control at the remote
of this unit.
sensor
obstacle in the
of the
path
remote control within about
remote control and this unit.
?
The batteries in the remote control
are
the batteries with
new ones.
exhausted.
Specification
Power
Power
AC
supply
consumption
220V, 50Hz
150 W
Mass
12.4
External dimensions
(W
x
H
x
D)
conditions
Operating
Frequency response (audio)
Signal-to-noise ratio (audio)
Harmonic distortion (audio)
235
kg
x
430
483
x
mm
5°C to
Temperature:
35°C, Operation
status: Horizontal
150 Hz to 20 kHz
More than 80 dB
0.5 %
Surround mode
(1 kHz,
Front: 30W
+
(1 kHz, NOP, JIS FILTER)
position) (30 kHz LPF/A Filter)
30W (THD 10 %)
at 12W
Center*: 30W
Surround*: 30W
30W
+
Subwoofer*: 50W
Satellite
1
Type
Impedance
Frequency Response
Speaker (FE-3000TE)
Way 1 Speaker
and
-
(1m)
30W
x
1
Way
H
x
D)
specifications
(FA-3000AWE)
Speaker
40
-
2,500 Hz
82 dB/W
(1m)
50W
60W
100 W
90x125x107mm
235x430x483mm
0.7
are
1
4Ω
20,000 Hz
83 dB/W
Power
Input
Max. Input Power
Net Dimensions (W
Net Weight
Active Subwoofer
8Ω
110
Sound Pressure Level
Designs
kHz, THD 10 %)
Hz, THD 10 %)
at 1
AUX, COAXIAL, OPTICAL AUDIO
Inputs
Rated
(4Ω
(8Ω
at 30
subject
to
12.4
kg
change
kg
without notice.
11
P/NO: 3828R-D035V
Download PDF

advertising