LG FFH-360VA Owner's manual

LG FFH-360VA Owner's manual
FFH-360VA(RCD008C)
3/20/01 10:51 AM
페이지1
English
VIDEO COMPACT DISC
STEREO MUSIC SYSTEM
OWNER'S MANUAL
MODELS
:
FFH-360VA/L/S/AX
FE-360VE
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
without
and
specifications are subject
notice for improvement.
to
change
DIGITAL VIDEO
P/N:3828RCD008C
페이지2
3/20/01 10:51 AM
FFH-360VA(RCD008C)
MISE EN GARDE
CAUTION
Cet
de
appareil numerique de la classe B respecte toutes
Reglement sur le materiel brouilleur de Canada.
les
exigences
AVERTISSEMENT
CAUTION: TO REDUCE THE RISK OF
RISQUE DE CHOC ELECTRIQUENE-PAS OUVRIR
ELECTRIC SHOCK
DO NOT REMOVE
(FOR
COVER(OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
building,
point
within
user
manufacturer's
an
to the presence of
television
SHOCK, DO NOT
not open the cabinet. Refer
servicing
to
qualified personnel only.
CAUTION
or
procedures
frequency energy and if not
that is in strict accordance with the
instructions, may cause interference to radio and
It has been type tested and found to comply with
reception.
which the receiver is connected.
EUROPE)
If this product is marked with the CE-symbol,
is conformed to EMC regulation 89/336/EEC.
in this
component
radiation
properly,
-
THE CUSTOMERS IN
Laser
practical.
-
in hazardous
radiation exposure.
(FOR
as
-
of
adjustments or performance
specified herein may result
entry
a Class B computing device in accordance with the
specifications in subparts J of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference in
a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause interference to radio or television reception, which can be
determined by turning the equipment off and on, the user in
encouraged to try to correct the interference by one of more of the
following measures:
Reorients or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
shock, do
of cable
the limits for
WARNING:
TO REDUCE THE RISK OF FIRE OF ELECTRIC
point
NOTE:
equilateral triangle is
important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
Use of controls
close to the
installed and used
intended to alert the
other than those
as
The interference potential to the device.
This equipment generates and uses radio
persons.
The exclamation
AMERICA)
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
Explanation Graphical Symbols:
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
To avoid electrical
CUSTOMERS IN THE UNITED STATES OF
Note to CATV system Installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
product
is
-
it
means
which
(FOR
or an
radio/TV technician for
experienced
CUSTOMERS IN THE UNITED
help.
KINGDOM)
WIRING INSTRUCTIONS
capable
of
This
appliance is supplied with a BS1363 approved 3 amp fused mains
When replacing the fuse always use a 3 amp BS1362 approved
type. Never use this plug with the fuse cover omitted. To obtain a
replacement fuse cover contact your supplying dealer or "LG
emitting
plug.
the limit for Class 1.
exceeding
Consult the dealer
CAUTION: INVISIBLE LASER RADIATION WHEN OPEN
ELECTRONICS U.K.LTD".
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
If the mains sockets in your home differ, or are not suitable for the
of plug supplied, then the plug should be removed and a suitable
BEAM.
VARNING: OSYNLIG
DEL
ATTENTION: Quand
aux
LASERSTRALNING NAR
fitted. Please refer to the
DENNA
AR OPPNAD STRALEN AR FARLIG.
I'appareil
est ouvert,
Warning
ne
pas
s'exposer
radiations invisibles du faisceau laser.
on
the interior.
instructions below:
:
The mains
plug
destroyed.
A mains
mains
This label is located
wiring
type
type
severed from the mains lead of this
plug
appliance must be
engaged in a
with bared wires is hazardous if
output line socket.
IMPORTANT
This
Compact
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LASER
LUOKAN 1
LASER LAITE
The
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
is classified
Disc
as a
The wires in this mains lead
player
following
CLASS 1
product.
CLASS
1
LASER
coloured in accordance with the
Blue
:
Neutral
Brown
:
Live
As the colour of the wires in the mains lead of this
PRODUCT label is located
on
are
codes:
correspond with the coloured markings identifying
plug, proceed as follows:
the exterior.
appliance may not
the terminals in your
The wire which is coloured blue must be connected to the terminal
(FOR
CUSTOMERS IN
CANADA)
which is marked with the letter N
CAUTION: TO PREVENT ELECTRIC
SHOCK, DO NOT USE THIS
(POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE,
which is marked with the letter L
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY
If
digital apparatus meets all requirements
Interference-Causing Equipment Regulations.
of the Canadian
-
Warning
DO NOT OPEN
Pour eviter les chocs
rallonge,
un
coloured red.
:
Do not connect either wire to the earth
with the earth
MISE EN GARDE:
avec une
or
a
distribution board.
WARNING:
SHOCK HAZARD
coloured black.
13 amp BS1363 plug or any other type of plug is used, 3 amp
BS1362 approved fuse must be fitted either in the plug or at the
INSERTED TO PREVENT BLADE EXPOSURE.
This class B
or
The wire which is coloured brown must be connected to the terminal
electriques, n'utilisez pas cette fiche (polarisee)
receptacle ou une autre prise si vous ne pouvez
pas y inserer les broches a fond.
2
symbol
or
pin,
coloured green
marked with the letter E
or
green and
yellow.
or
페이지3
3/20/01 10:51 AM
FFH-360VA(RCD008C)
OPERATING ELEMENTS
FRONT VIEW
BACK VIEW
1
OPTION
30
2
3
29
28
4
5
27
6
7
8
9
10
11
12
13
26
14
19
24
31
25
32
23
33
22
21
20
15
34
36
16 17 18
18.
FRONT VIEW
35
PRESET UP / FORWARD PLAY
PLAY button
1.
TUNING DOWN/UP
UP /
PUSH EJECT)
(
SET(CLOCK / TIMER) / COUNTER
(TAPE) button (CD II / SET / COUNTER
RESET
buttons(CD)
(VCD)
RESET)
2.
RECORD / RECORD PAUSE button
21.
MIC Sockets
3.
MEMORY / PROGRAM button
22.
DISC DIRECT PLAY buttons
23.
DISC SKIP button
4.
MODE /
MENU-
/ CD
20. CD PAUSE /
(TAPE)
PREVIOUS/NEXT buttons
MENU+
(TAPE)
)
19. TAPE DECK 2 EJECT POSITION
buttons(TUNER)
REWIND / FAST FORWARD buttons
TRACK SKIP / SEARCH
(PRESET
(TUNER/CD)
button(VCD)
RIF button (TUNER)
button(VCD)
(DISC1, DISC2, DISC3)
24. CD OPEN/CLOSE button
25.
MIC Volume
5.
REMOTE SENSOR
26. CD PAUSE / SET indicator
6.
MDSS indicator
27. VOLUME knob
7.
MDSS button
28. TIMER button
8.
POWER button
29. CLOCK button
9.
PBC ON/OFF button
30. CD DOOR
PLAY MODE button
10. UBB
11.
(Ultra
Bass
(OPTIONAL)
Booster) / Hi-TONE
BACK VIEW
button
NORMAL DUBBING / CD SYNCHRO
31. ANTENNA
RECORDING / SELECT button
12. HEADPHONE socket
(PHONES)
15.
FUNCTION SELECT
button
(PRESET
DOWN /
35. VOLTAGE SELECTOR
36.
)
17. TAPE STOP / CD STOP/CLEAR button
(
/
INPUT
34. SPEAKER terminal
PRESET DOWN / BACKWARD PLAY
(OPTIONAL)
(OPTIONAL)
33. VIDEO OUTPUT SOCKET
PUSH EJECT)
position (
buttons (TUNER BAND,
CD, TAPE 1/2, AUX)
16.
terminal
SOCKET
13. HI-SPEED DUBBING / RETURN button
14. TAPE DECK 1 EJECT
(AERIAL)
32. AUXILIARY / PHONO
CLEAR)
3
POWER CORD
(OPTIONAL)
FFH-360VA(RCD008C)
3/20/01 10:51 AM
페이지4
FUNCTION DISPLAY
12
3
4
5
6
7
16
15 14 13 12 11 10
9
8
1.
LEVEL indicator
8.
DISC NO. indicator
2.
CD REPEAT indicator
9.
DISC entered indicator
3.
FUNCTION, VOLUME LEVEL, CLOCK,
10. R.I.F. indicator
FREQUENCY, TAPE COUNTER, CD PLAYING
TIME, MDSS, UBB, Hi-TONE, EQ PATTERN, PBC
11. AUTO TUNE RECEIVING indicator
display
13. TAPE DIRECTION indicator
4.
LEVEL indicator
14. PLAY MODE indicator
5.
FM STEREO RECEIVING indicator
6.
FM MONO indicator
15. RECORD / RECORD PAUSE indicator
7.
UBB indicator
16. TIMER indicator
12. MUTE indicator
(Use only
auto
reverse
deck)
REMOTE CONTROL
CD function buttons
3.
?
?
PBC
?
?
Disc
?
Last Memo
?
Program
?
1
2
12
?
11
Pause( )
Next(
)
Play( )/SELECT
Previous(
)
Stop/Clear( )
?
?
?
3
Skip
Display
Repeat
?
?
Return
Time Search
4.
Echo button
5.
8.
Tape function buttons
Tape 1/Tape 2 seletion
Reverse play(
):OPTIONAL
Forward play(
)
Rewind/Fast forward(
)
Stop( )
Record/Record Pause( /II)
Sleep button
Preset down/up (
) buttons
Volume down/up (
) buttons
9.
MDSS button
?
OPTIONAL
45
6
?
?
910
?
?
?
6.
7
1.
POWER button
2.
Numeric
7.
8
EQ.pattern
11
Function selection
.
12.
buttons(1-0)
4
button
10.
Mute button
buttons(TUNER, CD, TAPE, AUX)
FFH-360VA(RCD008C)
3/20/01 10:51 AM
페이지5
REMOTE CONTROL
Control
Range
The remote control device is
R
designed
for the range
shown in the illustration.
NOTE
Strong light
Approx.7m
or
obstacles between the remote control
device and the stereo
system may interfere with the
of the remote control.
functioning
Notes
on
Batteries
Your remote control
Use two
comes
"AAA(UM-4.
IEC
with batteries.
R03)" type high quality
batteries.
Open
Install the batteries
rear cover.
their
the
polarity(
,
When the remote control fails to
according to
) and close
operate accurately
at maximum distance from the unit.
worn
cover.
out batteries with
Replace
the
new ones.
Install two "AAA" type batteries, observing correct
battery polarity( and ). Reversed battery
polarity might damage the unit.
Do not use different types of batteries together, or
an
old
ones
When you
time,
with
are
remove
new one.
not
going
the
batteries
to
use
to
the unit for
a
long
prevent possible
electrolyte leakage.
AAA(RO3/UM-4)TYPE
SYSTEM CONNECTIONS
TV
or
Connection to
Monitor
VIDEO OUT
VIDEO OUT
jack
Auxiliary Sources
connection
From the VIDEO OUT jack on the back of
theunittoaVIDEOINjackofaTVor
Monitor connect.
AUX
TV Video In
jacks
connections
Two
AUX
VIDEO
VIDEO
RL
To Video out
AUDIO
AUDIO
IN
OUT
To TV
(To
or
VCR etc.
Audio
Out)
phono sockets marked AUX are
provided on the back of the unit for
connecting other units (for example, a
record player with a pre amplifier, video
recorders or tape recorders).
To AUX
NOTE:
sockets
?You
can
enjoy a song while listening
accompaniment of selected song through your
watching the videos on TV.
?Press "TV/VIDEO Selection" button
video signal (Video).
on
to the
unit and
TV to select
L
Connection the Main
Left
Speaker
R
Speakers
Insert the red wire of the right/left hand speaker into the
red terminal marked(+) at the back of the unit.
Insert the black wire into the black terminal marked(-).
Right Speaker
This speaker system is designed for magnetic shielded.
But the video image of a nearby television may be
distorted.
In this case, put away the affected television about
10~20cmfrom the speaker system.
5
3/20/01 10:51 AM
FFH-360VA(RCD008C)
페이지6
SYSTEM CONNECTIONS
Antenna(aerial) Connection
For the
European
and U.K. model
For the models for other countries
IMPORTANT
figure (2), (4).
figure (1), (3).
FM Antenna
(aerial) Connection
Unless radio
signals
are
very weak,
antenna is necessary,
FM indoor antenna
marked FM
(1)
2
BAND(FM/AM)
on
simply
(aerial) wire
external
supplied
to the terminal
the back of the unit
(2) 3 BAND(FM/MW/LW)
AREA
no
connect the
AREA
MW/LW
FM external
antenna
antenna(aerial)
(not supplied)
For MW/LW
the
75 ohms coaxial cable
AM
loop
loop
(aerial)
reception, connect
(aerial) to the
antenna
terminal marked MW/LW
loop antenna
(aerial)... included
FM indoor
antenna(aerial)
AM
FM external
antenna(aerial)
(not supplied)
Position
it for the
best
MW
/LW
GND
FM
FM
reception
75Ω
(3) 3 BAND(FM/MW/SW)
(4)
AREA
2
BAND[FM/AM(MW)]
For
MW
loop
antenna
(aerial)
FM indoor antenna
(aerial)
Position it for the
best reception
the
antenna(aerial)
(not supplied)
terminal marked AM
FM external
antenna(aerial)
(not supplied)
MW
AM
FM
75Ω
FM
MW ANTENNA WIRE
TWISTED LINE
SW Antenna
AM(MW) loop
antenna (aerial)
coaxial cable
SW
GND
AM(MW) reception, connect
loop antenna (aerial) to the
FM external
AREA
FM ANTENNA WIRE
6
페이지7
3/20/01 10:51 AM
FFH-360VA(RCD008C)
CLOCK SETTING
Example
1.
:
Set to 9:25 in the
Press the CLOCK button.
(If
morning
the clock is
than 1.5
-
seconds)
begin
The hours
5.
already
set, press and hold the CLOCK button for
Press the CDII/SET/COUNTER RESET button.
more
PREV
NEXT
TUNING DOWN
TUNING UP
to blink.
CLOCK
CD II
SET/
PRESET
PRESET
DOWN
UP
CLEAR
COUNT
2.
Select
24 hour
a
cycle
PRESET DOWN
pressing
PREV
NEXT
TUNING DOWN
TUNING UP
or
or
12 hour
UP
6.
cycle by
Set the minute with PRESET DOWN
button
button.
RESET
(or
turn the JOG
PREV
NEXT
TUNING DOWN
TUNING UP
or
UP
DIAL).
CD II
SET/
PRESET
COUNTER RESET
(24HR)
or
COUNTER RESET
(12HR)
7.
PREV
NEXT
TUNING UP
Press the CDII/SET/COUNTER RESET button.
The clock starts
Press the CDII/SET/COUNTER RESET button.
TUNING DOWN
UP
CLEAR
PRESET
UP
CLEAR
3.
PRESET
DOWN
CD II
SET/
PRESET
DOWN
operating.
PREV
NEXT
TUNING DOWN
TUNING UP
CD II
SET/
PRESET
DOWN
PRESET
UP
CLEAR
COUNTER
ET
CD II
SET/
PRESET
DOWN
PRESET
UP
CLEAR
COUNT
4.
Set the hour with PRESET DOWN
or
UP
button.
RESET
Information
on
AM 12:00
=
midnight
the time
PM 12:00
=
noon
NOTE:
PREV
NEXT
TUNING DOWN
TUNING UP
When
a power interruption has occurred for
than 10 seconds.
The clock
CD II
SET/
PRESET
DOWN
display.
PRESET
UP
CLEAR
COUNTER RESET
7
setting
is erased, and
"-- : --"
will flash
more
on
the
페이지8
3/20/01 10:51 AM
FFH-360VA(RCD008C)
BEFORE OPERATING
Volume
MUTE
Adjustment
Turn VOLUME clockwise to increase the sound level,
or
counterclockwise to decrease it.
If you turn the volume up more than maximum level,
the volume level flashes in the display.
(Or press VOLUME
commander.)
Sound
MDSS
+ or
-
button
Sound
bass
(UBB
:
Ultra
remote
the
The MUTE indicator appears
MODE/RIF(Radio
Filter) button
To switch from
System)
reinforce treble
(Hi-
on
Bass
and
Booster),
STEREO off.
lights up.
To cancel it press the MDSS button
mono
to stereo
reception
which
Press the UBB/Hi-TONE button to set the UBB/HITONE mode.
is
UBB OFF
MDSS OFF
HI-TONE ON
To activate stereo sound
choose
can
(on
HI-TONE OFF
remote
between
impressions : select a
using the EQ PATTERN
4
control)
fixed
desired sound
sound
mode
Press the EQ PATTERN button
once
to
see
on
ROCK
: more
POP
:
less bass, less treble
CLASSIC
:
for orchestral music
more
the
the
display.
Press the EQ PATTERN button repeatedly, until
desired sound mode is scrolled on the display.
FLAT
: linear frequency response
bass,
by
button.
current sound mode scrolled
For
it
pressed,
follows
UBB ON
You
button
the
treble
personal listening
headphone to headphone socket.
sound comes from the speakers.
Connect
No
and vice
a
MW(AM),
or
LW
broadcasting
is
being
recorded, the R.I.F.(BEAT-SWITCH) button
again.
To reinforce bass and treble
UBB/HI-TONE
display.
Interference
used to reduce unwanted "beat"
as
the
If the power of transmission is too weak to
receive stereo FM without interference, switch the
When
time
to
versa.
The MDSS indicator
Each
example,
telephone.
surround effect.
changes
control)
the remote
on
Press the MDSS button to
Tone),
answer
Quality Adjustment
(Multi Dynamic
button(on
Press this button to mute your unit.
You can mute your unit in order, for
8
were
not heard before
signals
recording.
can
be
and noise,
3/20/01 10:51 AM
FFH-360VA(RCD008C)
페이지9
RADIO RECEPTION
Tuning
in
1. Turn
the power.
2.
on
Automatically
3. To memorize in
Press TUNER/BAND button
repeatedly
until the
Keep
button
)
(2)
Press the MEMORY / PROG. button.
than 0.5 second. The
(3)
DOWN/UP
depressed
for
unit tunes in
station
a
channel
adding
Select
TUNING
more
or
(1)
desired band appears.
3.
selecting
number.
(
or
Select
a
a
desired station.
desired channel number
by pressing
the PRESET DOWN / UP button, while the
automatically.
preset number flashes.
Tuning
in
1. Turn
the power.
2.
on
(4)
Manually
before the channel number
Press TUNER/BAND button
repeatedly
button
TUNING
4. To recall
DOWN/UP
and
briefly
(
repeatedly,
the
Stations
previously
stored in any
memory.
Press the MEMORY/PROG. button for
1.5 seconds in TUNER
CLEAR is
(2)
flashing
in the
flashing
mode
more
so
that
display.
Press the STOP / CLEAR
while CLEAR is
(
/CLEAR)
in the
button
display.
2. To memorize the stations in order
(1)
Press the TUNER / BAND button to select
desired
(2)
Press
the
)
or
(3)
(4)
wave
TUNING
DOWN
button to select
the
preset
number flashes.
Press the
MEMORY
/
MEMORY /
preset
a
band.
Press
while
number is
(5) Repeat step (1)
can
buttons
1. To clear any program
than
preset number appears
or
press it
repeatedly.
You
(1)
presets.
until the desired
desired
station appears.
Storing
again
stops flashing.
Press and hold the PRESET DOWN / UP button
)
or
until
button
until the
desired band appears.
3. Press
Press the MEMORY / PROG.
to
(4)
a
/
UP
(
desired station.
PROG.
PROG.
button
button
and
again
flashing.
to be memorized up to
30 stations.
9
also recall
on
presets by using the Numeric
the remote control.
페이지10
3/20/01 10:51 AM
FFH-360VA(RCD008C)
BEFORE CD PLAYING
Type
NOTE
:
of discs and contents
This
equipment
has been
designed to play discs bearing
only with digital audio signals.
CD: compact disc recorded
VIDEO CD
Disc
the identification
logo
shown
as
below.
compact disc recorded with compressed digital audio and video signals.
:
Disc Size
Type
Recording
8cm
<Compact
Recorded Contents
Time
20 minutes
?
CD:
digital
audio
Disc>
DIGITAL VIDEO
?
74 minutes
12cm
compressed digital audio
+ compressed digital
video(motion pitures)
VIDEO CD
<Video
Compact
Disc>
Notes
This
player
on
VIDEO CDs
conforms to Ver. 1.1 and Ver. 2.0 of
VIDEO CD standards. You
playback according
Disc
CAUTION
can
enjoy
two kinds of
Small
to the discs.
cause
You
type
Because
can
video
compressed
1.1
Enjoy video playback(moving
pictures) as well as music.
enormous
even
much
disc
in 1/100 of
minor scratch
VIDEO CDs
without PBC
functions(Ver.
disc)
impact while video disc is playing
abnormality on pictures.
on
influence
reproduces data
regular disc, even a
its surface
on
Play
PBC
menu screens
2.0
TV screen, in addition to the
video playback function of Ver
functions(Ver
discs)
displayed
using
on
the
on
pictures
movements and detailed
this is not
a
pattern
with
enjoy good quality
Discs should be
defect.
kept
video and audio...
clean at all times.
Stains, scratches and dust
on
disc's surface
Never touch disc's surface.
10
cause
bad
quality
can
many
motion, however
1.1 discs.
To
cause
make the disc unusable. Therefore,
more care is required.
appear
the
can
video and audio and
A mosaic with faint checker
interactive software
VIDEO CDs with
can
video and audio.
페이지11
3/20/01 10:51 AM
FFH-360VA(RCD008C)
PLAYING A VIDEO CD
Basic
You
Operation
both VIDEO CDs without PBC
play
can
To
functions and those with PBC functions
Before you
system
1. Turn
begin, make sure you've
a TV correctly and firmly.
to
on
(Ver.1.1)
(Ver.2.0).
Find
a
connected the
the TV and select the video
so
CD in
that
mode.
on
the disc
button
or
and release it at the
point.
Press DISC DIRECT PLAY button
stop mode
or
the
DISC SKIP button.
Press REPEAT button
VIDEO CD you
(on
have selected
"REPEAT 1 DISC" appears.
Exchange
the disc
the
pressed
VIDEO
a
Play only
3. Press the CD function button to enter the CD
place
Keep
scene
desired
Select
input
in
point
a
track or
*2
you can view the pictures from this system.
2. Press POWER button to turn on the system.
4. Press CD OPEN/CLOSE button and
Do this
other
the remote
control)repeatedly
until
Press DISC SKIP button.
VIDEO CDs
tray, with the label side up.
while
Play
playing
all VIDEO
Press REPEAT button
CDs *3
the remote
(on
repeatedly
control)
until "REPEAT ALL DISC"
appears.
*1 There may be
*2
Number 1 disc
Playing
one or
Place discs
on
Number 2 disc
some
disturbance in the video
for VIDEO CDs without PBC functions
*3 This function cannot be used
playback
two discs
trays
Only
1 and 2.
of
a
during
image.
(Ver.1.1)
menu
VIDEO CD with the PBC functions
(Ver. 2.0)
three discs
Playing
placing
After
two
Play
discs, press the DISC SKIP
trays. Place the next disc
button to rotate the
on
tray
an
3.
(only
8cm(3 in.) disc, put
circle of the
(PBC)
function and MENU selection
NOTICE
To load
back Control
for VIDEO CD version
2.0)
it onto the inner
When this function is used for
tray.
playback of the Disc
by menu, the
which has the function of PBC driven
5. Press the CD OPEN/CLOSE button to close the
disc
operation
compartment.
6. Press the PLAY
(
/SELECT
) (or
play.
on
remote
control)
Play begins with the disc on the left hand side tray
before closing the disc compartment. All the discs
are played once only.
Pause
Select
mode of PBC disc, then
Press
2. Press the
by general
3. When
Press CD
a
or scene
track
/SET/COUNTER RESET
Press
again
to
Press NEXT/
PREV/
during play or stop
stopped and the PBC
(CD PLAY)
button to
reproduct
a source
track unit.
make
you want to
4. Press the
the remote
on
is
play
an
operation
in
MENU
mode, then press PBC ON/OFF button again. The
PBC appears, and the operation is in stop mode.
/CLEAR.
(or
mode.
goes out.
Do this
stop play
on
1.Press the PBC ON/OFF button
button to start
To
is made in Default PBC
control).*1
resume play.
to go
source
forward,
by
5. Choose
to go back.*2
1
(CD PLAY)
button to
one
of the
followings
a
to select the MENU.
Select the desired MENU number
by
reproduce
MENU.
MENU-/+
buttons,
and
on
then
the
screen
press
the
SELECT button.
2
Select the desired
NUMERIC
11
MENU
buttons(1~0)on
number
directly by
the remote control.
페이지12
3/20/01 10:51 AM
FFH-360VA(RCD008C)
PLAYING A VIDEO CD
To
Do this
Stop play
Press
See the next of
Go back to the
a menu
top of
/CLEAR.
MENU
Press RETURN.
a
menu
MENU 1
Go back to
a
(main)
Press NEXT.
MENU 2
MENU 3
Press PREV.
previous
menu
RETURN function
(only
for VIDEO CD version
2.0)
If there is
no
NEXT
RETURN
Returns to the
preceding MENU.
preceding menu (in case
of the first
PREV
menu),
Numeric buttons
+
this function may not be executed.
SELECT
PLAYING AN ORDINARY AUDIO CD / VIDEO CD
Normal
You
can
also
Do not
Play
play
1. Press the POWER button to turn
on
the
system.
(CD PLAY) button, play begins with the
side tray before closing the disc
compartment. All the discs are played once only.
preceding
Searching
(CD PAUSE)
or
Remove the CD
PREVIOUS
OPEN/CLOSE
Stop play
(CD STOP)
Changing
Discs
During Play
1. Press the CD OPEN/CLOSE button to open the disc
compartment.
2. Remove the discs and
on
place other discs.
the left side tray will be
on one
a
can
or
for
radio.
a
Particular Point
Track
button
pressed
and release it at the
To search forward:
button
Keep the
desired point.
pressed
and release it at the
speed.
Search in case of VIDEO CD
The SEARCH is processed by skipping the pictures
in constant time interval.(At this time, no sound is
heard, part or all of the picture is dispersed, or
certain color or paused picture might appear)
play.
placed
compact disc
Search in case of CD
The SEARCH is processed in constant
Two discs can be changed while the other remaining
disc is played.
This operation is not applicable during programmed
The disc
in
You
To search back:
Keep the
desired point.
NEXT
track
one
time.
locate a particular point in a track during play
by monitoring the high-speed cueing sound or
observing the CD counter in the display.
press
Resume play after pause
Go to the next track
than
same
affected television
3. Press the
disc on left
When you want to
Pause
more
at the
tray
If, during CD play, the video image of a nearby
television is distorted, or if static is heard from a
nearby radio, move this unit further away from the
standard audio CDs.
2. Press the CD OPEN/CLOSE button, and place the
discs on the disc tray, with the label side up.
Go back to the
place
disc
played
When
button is pressed and it passes
through the interval between tracks(part with no
signal) or during the automatic disc search play,
there might be an interval at the beginning of the
disc with no picture and no sound.
next.
3. Press the CD OPEN/CLOSE button to close the disc
compartment.
NOTES:
NOTE:
Do not tilt the unit with discs loaded. This may
dislodge the discs. Usage under these conditions
may damage the discs.
If CD
picture at
unfolding
screen.
12
button is pressed twice to pause graphic
the moment of scroll(the moment picture is
on screen), there might be a blank on the
페이지13
3/20/01 10:52 AM
FFH-360VA(RCD008C)
PLAYING AN ORDINARY AUDIO CD / VIDEO CD
to the
Skipping
Beginning
of
a
Ordinary
?
After the time is entered and
Track
might
You
can
To
return
locate the
previous
the
to
beginning of
beginning
any track on a disc.
of the current or
a
button
to return to the
once
beginning
the
backward
To
button
one
by
forward
one
by
a
Track
Directly
the
the
NUMERIC
buttons
NUMERIC
continuously (within
Time
(on
2
buttons
No.
0
and
3
No.
1
and
2
1. Press the
of video CD with PBC function you should
button while
LAST MEMO.
Play
(Operating
To
or
starts from where it
play
one
with
track
the PLAY/PAUSE
NOTES:
only
the remote
repeatedly.
display
( : on unit)
"
play
one
disc
for the
automatically searches
corresponding time and starts playing.
and press PLAY
?
During
time search the entered time flashes.
?
If the Time Search button is
?
pressed during
change. The time entered
happens enter it again.
The time entered will be considered
time
start
the
To
time
will be cancelled. If this
as
"
absolute
When all 4
To
are
entered it
automatically
After the time entered it counts from the very
beginning of the disc and searches for the time
entered.
?
If the time that is
longer
than the total
(
all tracks
the
/SELECT)(
on
all discs
REPEAT button
", and press the PLAY(
"
display
unit)
recording
time of the disc is entered it will be cancelled.
13
".
button to
repeatedly
three
times
/SELSCT)(
to
display
unit )
:on
play.
repeat only selected tracks
the desired tracks, and press the REPEAT
button to
digits
"
and press
button to start
:on
Program
searches the time.
?
play
button to start
from the
NOTES:
?
control)
play.
Press
beginning of the disc).
After time search is completed, it will be indicated as
relative time(time from the beginning of the track).
(time
remote
repeatedly.
After the time is entered it
Press the REPEAT button twice to
or
the
play.
To
input standby
on
stopped.
Press the REPEAT button to
"--:--" appears on the display.
Press the NUMERIC button No. 2, 3, 4 and 0
continuously. "23:40" is appeared on the display.
time
playing.
button
Repeat Play
play
sec.
during stop
again.
(STOP)
the
control.
play.
?
playback
NOTES:
2. Press
Press the TIME SEARCH button
types of disc.
During
This function works in both PBC ON and OFF mode.
control)
<EXAMPLE> Enter 23 min. 40
?
remaining
SEARCH)
system after PBC mode off.
?
time.
Continuous playing from where
a CD stopped (LAST MEMORY
VIDEO CD
on a
This function works for all
Press this button
seconds).
Searching
the remote
case
remaining playing
2. To cancel this function.
If you enter the time within the total recording time of
video compact disc, play starts from the time entered.
In
on
control)
remote
button for the
Time
pause then it will be indicated that is the total
remaining playing time of a disc.
continuously (within 2 seconds).
In case selecting track No. 12
Press
Remaining
or
beginning of any track on a disc by
(1~0)on the remote control.
selecting track No. 3
case
the
program play it will not operate.
1. Press the DISPLAY button once during
?
one.
the NUMERIC button
Press
?
?
skip track(s)
locate the
can
In
to
picture
NOTES:
button
Selecting
?
repeatedly
tracks
skip
the
If you press the DISPLAY button the total
time of the current disc is indicated.
tracks
skip
using
to
played
one.
Press the
You
repeatedly
operate.
dispersed.
CD (on the
Display
of the current track.
Press
be
Viewing
track.
Press the
audio CDs will not
?
display
"
"or"
".
페이지14
3/20/01 10:52 AM
FFH-360VA(RCD008C)
PLAYING AN ORDINARY AUDIO CD / VIDEO CD
To cancel
stop mode,
repeat play
Press the REPEAT button
so
that
"
"
in the
out.
To clear the
During playback
You
can
also
operate
?
number, and
a
programmed
contents
during stop
/CLEAR) button.
and
Press the CD OPEN/CLOSE button.
?
During the programmed play, you can play repeatedly
onetrack(
)oralldiscs(
).
During the repeat play of an entire disc, if you select
the programmed play, it is changed to repeat play of all
To add tracks to the program
(1) Press the MEMORY/PROG. button to search until 00
discs.
(2)
The
repeat playback does
button and
To
The
(1)
memory function that allows play up to
20 tracks over three discs in any order.
VIDEO CD with PBC function, program play will be not
played
has
a
Press the
change
the
one
on
the remote
The
DISC
the
You
display.
You
play.
You
2.
3.
4.
<EXAMPLE>
on
the
"No.0" and "No.3"
one
Adjust the
Adjust the
repeatedly,
it is in the
To
record
source
see
that the disc
When not
by connecting
source
a
television
of the function buttons to select the
VOLUME and tone of the
source
source.
MIC volume and select the ECHO volume.
displayed
so
in the
the desired letters
the
that ECHO-1
are
microphone
ECHO-2
or
Press the button
display.
scrolled in the
sound
mixing
procedure of recording
using the microphone.
from each
Set the MIC volume control to minimum
the NUMERIC button
on
operate during
display.
with
a
sound.
Follow the
display.
by pressing
continuously
not
mixed, and play it.
ECHO-3 is
sure
does
karaoke
Press the ECHO button
3. Select the disc "No.1" with the DISC SKIP button and
then track "No.3"
button
To ECHO volume control
Track No.12 from disc
Track No.7 from disc No.3
No. flashes
can
Press
to be
The program can be entered using the DISC SKIP button
and the NUMERIC buttons (No. 1~0)onthe remote control.
2. Press the PROGRAM button. You will
SKIP
viewing the caption
(or monitor) with the VIDEO CDs.
your microphone to the MIC 1 or MIC 2 socket.
connect up to two microphones for a duet.
on
1. Connect
the unit, make
play.
obtain the better Karaoke effect
can
and motion
Shortened memorizing the
programme
programming
STOP( ) mode.
button to start
can
sing to music
microphone to the unit.
4. Press the MEMORY/PROG. button.
1. Before
(CD PLAY)
programmed play.
Playing
No.2
button.
or
Press the
To select the 6th track, press the
or
button repeatedly until track number "6" is displayed in
Track No.3 from disc No.1
the
NOTICE
of the DISC DIRECT
button to start
display
Press the MEMORY / PROG. button.
(3)
(4)
?
Repeat steps 2 to 4.
(CD PALY)
tracks
program number.
Select the desired track on the disc with DISC SKIP
(2)
button to select the tracks.
6. Press the
play.
changed
PLAY buttons.
or
buttons to start
programmed
button and
control in the stop mode.
2. Press DISC SKIP button or
3. Press the
(CD PLAY)
Press the MEMORY/PROG. button to
in PBC ON status.
1. Press the MEMORY/PROG. button
button.
or
Press the MEMORY / PROG. button.
(3)
(4)
Programmed Play
player
appears in the track number.
Select the desired track on the disc with DISC SKIP
not work in PBC ON status
of the VIDEO CD with PBC function.
MIC and
remove
the
the remote control.
microphone
or
source.
turn off the
from the MIC socket.
NOTES:
4. Select the disc "No.2" with the DISC SKIP button and
then track "No.7"
microphone is set too near the speaker,
howling sound may be produced. In this case move
the microphone away from the speaker or decrease
the sound level by using the MIC volume and ECHO
"No.0" and "No.7"
button.
?
then track "No.12"
"No.1" and "No.2"
by pressing the NUMERIC button
continuously on the remote control.
Press the
begins
by pressing the NUMERIC button
continuously on the remote control.
PLAY( /SELECT)button, and playback
?
with the first track of the stored program.
To check the
programmed
pressed
If sound
through
the
microphone
is
extremely
loud it
may be distorted. In this case turn the MIC volume
toward minimum and set to 'ECHO OFF' with the
contents
Each time the MEMORY/PROG. button is
If the
a
5. Select the disc "No.3" with the DISC SKIP button and
6.
track
a
displayed.
then press the STOP/CLEAR(
Turn off the power.
repeat play during playback.
NOTICE
5.
number,
Press the MEMORY/PROG. button
?
the
disc
a
program number will be
display goes
ECHO button.
in the
14
페이지15
3/20/01 10:52 AM
FFH-360VA(RCD008C)
AUXILIARY FUNCTION
1. Switch
the
on
auxiliary
connected to the
rear
device i.e. TV
mounted AUX
or
NOTE:
VCR,
(PHONO)
sockets.
You
can
see
RECORDING section.
also record from the
auxiliary input
source,
2. Press the "AUX" function button.
TAPE PLAYBACK
Playback
Preparation
You
can use
normal
only
Endless
tapes.
on
2)
necessary press the button
other deck.)
In
again
to select the
4.
(or 2)
position.
EJECT
cassettes with the
or
both
or
one
or
facing
of non-autoreverse
(Front
side
playback
(auto stop)
deck 1
play only)
with PLAY button
The
(reverse side).
the
(front side)
operated
in the
5.
the front
Fast forward
or
rewind
Press button
2.
on
:
the unit
or
on
remote control for fast forward and
-
DECK 2
-
Auto
stop only (non-autoreverse)
Auto
reverse
the
or
to rewind.
(option)
6. To end
3. Auto
non-
autoreverse deck.
NOTE:
DECK 1
or
(reverse
PLAY button is not
side)
two
to the bottom and the
cassette side that you wish to hear
in cassette deck 1
by pushing
Insert
tape side
but six times
Playback:
Start
cassette deck 1
Open
Like
Option
case
and 2.
2. To insert cassettes:
deck
2nd
and press the TAPE 1/2 button.
(If
:
in succession in deck 2.
1. To set the cassette function:
Switch the unit
loop
playback
:
Press the STOP / CLEAR
reverse :
Select which side of the cassette is to be
The unit
played
(
stops automatically
/CLEAR)
button.
at the end of the
tape.
and how often with the PLAY MODE button.
1)
1st
In
Option
case
of non-autoreverse
and auto
reverse
In this case, the continuous
1 and 2 cannot be
(a)
Tape Counter
play
performed.
Press
between deck
DECK 2
(Auto Reverse)
:
Unit
plays
reverse
and
the front
:
Unit
stops automatically
plays
reverse
and
or
side in deck B
at the end of the
All sides
COUNTER
Reset
RESET
button
while
tape
playing
stop.
During play or fast forward, the tape counter increases
and during rewind, the tape counter decreases.
play only.
One side
the
or
DECK 1
Front side
(b)
deck 1
(auto stop)
deck 2.
tape.
the front and
side in deck 2
stops automatically
at the end of the
tape.
15
페이지16
3/20/01 10:52 AM
FFH-360VA(RCD008C)
RECORDING
CD, Radio
Connected Equipment
Recording
from
a
3. To insert cassette
or
Insert
a
blank cassette into the cassette
Rewind the cassette to the
Wind up the tape to the
Use only normal tapes.
can
the cassette deck 2.
compartment.
Preparation
You
:
Open
point recording
4. Auto
record from cassette deck 2
1. To select the function
Switch the unit
starts.
only.
:
and select CD, TUNER, AUX
on
reverse
of the
beginning
tape.
(OPTIONAL)
Select the PLAY MODE,
if you
record the front side and
or
only
wish to
for both
cassette sides.
etc.
NOTE:
2. To insert the cassette
If the last track has
:
Open
the cassette deck 2.
Insert
a
stopped because the tape
again completely on
the track will be recorded
blank cassette into the cassette
side of the cassette
reverse
is full,
the
tape.
compartment.
5. To start
3. PLAY MODE
Select the
(OPTIONAL)
play mode with PLAY
you wish to record
one
recording
:
Press the CD SYNC.button.
MODE button,
cassette side
only
The
if
and
recording begins
and
stops automatically
at
the end of the CD.
or
for both cassette sides.
NOTE:
4.
Recording
mode
Press the
/REC
In
:
case
of Auto
Stop
deck
(OPTIONAL)
tape after one tape
new tape prior to pressing
If you want to record in a
continuously, change the
button.
The REC indicator flashes.
new
the PLAY button.
5. To start
recording
Press the
The
:
/REC
button
or
PLAY button
if
for the
you want to record the front side or
reverse side (OPTIONAL). The recording begins.
NOTE
NOTES
MODE
.
to be recorded
(Use only
auto
reverse
:
2. If you wish to record from the desired
the desired track with the
(PLAY
start with the front side
) always
,
PLAY
are
recording mute mode for 7
player starts playing and recording.
1. If you only want to record certain titles, program
these before the CD synchro recording.
:
If both cassette sides
enters into the
tape
seconds then CD
track, select
button
before
3.
deck)
commencing CD synchro recording.
The function change is not possible during
recording.
6. To
interrupt recording :
interrupt the recording for a short period, press
the
/REC
button again.
To continue with the recording, press the
/REC
To
button
one more
7. To end the
time.
recording
CD
(
stops automatically
/ CLEAR
)
Wind up the tape to the
Use only normal tapes.
button.
at the end of the
tape.
CD and
2. To insert cassettes
1. Select the CD function.
Open
the CD
to
Tape
point recording
starts.
deck
1. Select the TAPE function.
synchro recording function dubs a complete
programmed titles automatically into a
cassette.
2.
Tape
Dubbing only functions from cassette
(playback) to cassette deck 2 (recording)
Synchro Recording
The CD
from
Preparation
:
Press the STOP / CLEAR
The unit
Recording
(Dubbing)
:
Open
cassette deck 1.
Insert
a
recorded cassette and the cassette side
that you wish to dub to the front.
Open cassette deck 2.
compartment with the CD OPEN /
CLOSE button, insert discs and close the CD
Insert
compartment again.
compartment and the
a
blank cassette in the cassette
to record to the front.
16
cassette side that you wish
1
페이지17
3/20/01 10:52 AM
FFH-360VA(RCD008C)
RECORDING
3. To
NOTE
dub(auto dubbing):
Rewind both cassettes to the
beginning
of the
:
You cannot
change
tape.
dubbing.
Press NORMAL DUBB. for normal and HIGH DUBB.
The volume has
no
the
speed
effect
on
of
dubbing
while
the record level.
for double
The
speed dubbing.
dubbing starts up automatically.
NOTES
:
The pause function does not
4. To end
dubbing
:
Press the STOP /CLEAR
The unit
operate during dubbing.
/
(
stops automatically
CLEAR)
button.
at the end of the
tape.
TIMER
Timer
Setting
With the TIMER function you
reception
and
and
recording,
from
recording
CD
auxiliary
can
(4) Set the
have the radio
play, tape play
source
turned
play
or
on
hour to switch
PRESET DOWN
and off
(5)
at the time desired.
by pressing
on
UP.
or
Press the CDII/SET/COUNTER RESET
button to confirm the hour to switch
on.
The minute flashes.
1. Check the current time.
2. Press the
mode.
setting
the button for
(If
the timer is
more
than 1.5
indicator appears in the
already set,
press
(7)
-
flashes in the
in the
(8)
TUNER, press the
(9)
window.
display
(10)
Press the CDII/SET/COUNTER RESET
REC
(2)
TUNER
play only
TUNER
play
:
:
and
Press PRESET DOWN
you
can
UP to select
was
(3)
setting
a
nothing
being
play
switched
in the
turning
display
on
and the timer
perfected.
off.
automatically
and off at the time set.
If you select the AUX:
and
Follow
steps (1)~(11)except steps (2)~(3)
of '3. If you want to select the TUNER'.
the radio broadcast that
received before
has been
The selected function is
numbers.
automatically skipped
PRESET
UP.
(11) Switch the system
previous
operate continuously from step (3); in
this case, it will
or
by pressing
Press the CDII/SET/COUNTER RESET
remains in the
or
If the radio stations have
memory, this step is
Set the volume level
same
on.
level.
recording
desired radio station of the
programmed preset
the time to switch off in the
the time to turn
button to confirm the selected volume
button to confirm either PLAY and REC.
PLAY
as
DOWN
'PLAY' and 'REC' flashes in turn.
(1)
on.
display.
Program
way
CDII/SET/COUNTER RESET button until the
TUNER appears in the
Press the CDII/SET/COUNTER RESET
Now OFF TIME appears and the hour flashes
in turn.
3. If you want to select the
by pressing
UP.
or
button to confirm the minute to switch
and each
display
to switch on,
PRESET DOWN
seconds.)
function-TUNER, CD, TAPE, AUX
display
(6) Set the minute
TIMER button to enter the timer
If you select the CD
off the unit.
Follow
Press the CDII/SET/COUNTER RESET
to select the TUNER'
button to confirm the selected preset
number.
17
or
TAPE:
steps (4)~(11)of the '3. If you
explanation
want
section.
페이지18
3/20/01 10:52 AM
FFH-360VA(RCD008C)
TIMER
4. To cancel
check the timer.
or
Each time the
can
select the timer
activating
also check the timer
To activate
button
so
or
that
1. To
TIMER button is
setting
or
pressed
"
lights
up in the
that
"
"
in the
display
Press the SLEEP button. In the
that the units turns off
means
TIMER
display
you
for about 5 seconds. This
can see
automatically
after
90 minutes.
Each time the button is
display.
To cancel the TIMER, press the
so
can
status.
check the timer, press the
"
off,
you
cancel. You
the time until the power is turned
specify
TIMER button
pressed
before it turns off is reduced
by
the time interval
10 minutes. i.e.
80...70...etc.
goes out.
Select the desired time to turn off.
NOTES:
1. When the CD
no
or
TAPE is selected for
disc is entered in the disc drawer
tape is entered in the
function will be
2. When the CD
playback,
or no
if
2. To check the
turned off.
cassette
deck, the TUNER
cassette
While the
operated.
programmed playback,
cassette decks have cassette
tape
the REPEAT
turns off is
function is active press the
briefly.
displayed
The time
remaining
until it
for about 5 seconds.
automatically.
3. When the TAPE is selected for
cleck; the cassette
sleep
SLEEP button
ALL DISC will be selected
time until the power is
remaining
if both
playback,
tapes in; the
NOTE:
If you press the SLEEP button while the
cassette
in deck 2 will be selected
displayed (darken by half),
first.
sleep
time is
the SLEEP time is set
again.
4. The timer-off function will be
of power-on
case
operated only
the timer
by
in the
3. To cancel the
on.
If you wish to
Timer
Sleep
(Operating
When the
with
sleep
automatically
Setting
only
button
the remote
control)
specified
stop
repeatedly
the SLEEP button
timer mode
the function press the SLEEP
until 10 appears, and then press
once
again
while 10 is
displayed.
timer is used, the power is
turned off after the
sleep
time has
elapsed.
AUTO FUNCTION SELECT SYSTEM
This
unit
has
function
auto
an
various functions. i.e. If
radio
reception),
another(e.g.
the
unit
select
function is in
you
playback),
wish
system for
1. On the remote control
operation(e.g.
to
switch
to
all you have to do is
TUNER
:
PRESET
CD
:
PLAY(
TAPE
:
FORWARD
automatically
switches
recorder).This
to
applies
the
for
buttons
/SELECT)
PLAY button
function(cassette playback) directly,
function(cassette
following
and
cassette
select the desired
a
(
)
button
and REVERSE
(OPTIONAL)
new
the
2. On the unit
functions:
CD
:
DISC DIRECT PLAY buttons
(DISC 1, 2, 3)
18
(
)
3/20/01 10:52 AM
FFH-360VA(RCD008C)
페이지19
SPECIFICATIONS
MODEL
SECTION
FFH
360V
-
AMP
Output Power
Frequency Response
Signal-to-Noise Ratio
20W+20W
(6
2ch, T.H.D 10%)
,
42~25,000Hz
83 dB
TUNER
FM
87.5~108MHz
Tuning Range(optional)
Intermediate Frequency
Signal-to-Noise Ratio(Mono/Stereo, 98MHz)
Frequency Response
or
65~74MHz & 87.5~108MHz
10.7 MHz
62/58 dB
60~12,500Hz
AM(MW)
522~1,611 kHz, 530~1,720kHz
Tuning Range(optional)
Intermediate Frequency
Frequency Response
or
530~1,610kHz
450 kHz
100~2,000Hz
SW(OPTIONAL)
5.8~18.0MHz
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio(11MHz)
450 kHz
35 dB
LW(OPTIONAL)
153~281 kHz
Tuning Range
Intermediate Frequency
Signal-to-Noise Ratio(254kHz)
450 kHz
28 dB
CASSETTE DECK
FF, REW Time(C-60)
Frequency Response
Signal-to-Noise Ratio
Channel Separation
120
sec.
125~8,000Hz
43
50
dB(P/B), 43dB(R/P)
dB(P/B), 45dB(R/P)
CD
40~18,000Hz
Frequency Response
Signal-to-Noise Ratio
70 dB
GENERAL
Power
Refer to the back
Net
273x330x360mm
Requirements
Dimensions(WxHxD)
Weight
Net
6.5
MODEL
FE
Type
Bass Reflex 2
Impedance
6
Frequency Response
60~20,000Hz
Sound Pressure Level
86
Rated
20W
Max.
Net
Net
*
NOTE
:
Input
Power
Power
Way
-
2
360VE
Speaker System
dB/W(1m)
40W
200x326x249mm
Dimensions(WxHxD)
Weight
Designs
of the unit.
kg
SECTION
Input
panel
2.95kg
and
specifications
are
subject
to
change
19
without notice for
improvement.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement