FFH-185.JA7IDLA(ENG/KR-220A/3828R-A040B)
MICRO AUDIO COMPONENT
OWNER'S MANUAL
MODEL: KR-220A
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs and specifications
improvement.
for
are
subject
to
change
without notice
CAUTION:INVISIBLE LASER RADIATION WHEN OPEN
CAUTION
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM.
LASERSTRALNING NAR
AR OPPNAD STRALEN AR FARLIG.
VARNING:OSYNLIG
Attention:Quand
CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK
DO NOT REMOVE
s'exposer
COVER(OR BACK)
aux
l'appareil
ouvert,
on
This
CLASS 1
SERVICE PERSONNEL
Explanation Graphical Symbols:
The
lightning flash with arrowhead symbol, within
equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
an
within
the
and
equilateral
an
user
trian-
to the presence
maintenance(servicaccompanying
literature
WARNING:
TO REDUCE THE RISK OF FIRE OF ELECTRIC
SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
To avoid electrical
ing
shock, do not
qualified personnel only.
to
open the
cabinet, Refer servic-
CAUTION
Use of controls
adjustments or performance
specified herein may result in
or
other than those
of
procedures
hazardous radi-
ation exposure.
The
apparatus shall
and that
placed
not be exposed
abject filled with liquids,
the apparatus.
no
on
Laser
is
tion
component in this product
exceeding the limit for Class
1.
to
dripping
such
as
capable
or
splashing
vases, shall be
of
emitting
LASER
PRODUCT
KLASSE 1
LASER
PRODUKT
LUOKAN 1
LASER
LAITE
Compact Disc
player is classified as
a
CLASS 1 LASER
product.
KLASS 1
LASER APPARAT
The CLASS 1 LASER
CLASSE 1
PRODUIT LASER
PRODUCT label is
located
electric shock to persons.
point
gle is intended to alert
of important operating
ing) instructions in the
the appliance.
pas
the interior.
REFER SERVICING TO QUALIFIED
The exclamation
ne
radiations invisibles du faisceau laser.
This label is located
NO USER SERVICEABLE PARTS INSIDE.
est
DENNA DEL
radia-
2
on
the exterior.
CONTROL LOCATIONS
PUSH EJECT POSITION
11.
Front View
12. CLOCK BUTTON
13. SET BUTTON
12
3456
14. FUNCTION SELECTION BUTTON
7
(TUNER/BAND, CD, TAPE, AUX)
15. PROG./MEMO. BUTTON
16. MDSS BUTTON
REC/
17.
:RECORD/RECORD PAUSE
BUTTON
21
20
19
18. HEADPHONE SOCKET
8
(3.5mm)
19. REPEAT BUTTON
9
20. CD SYNC. BUTTON
10
18
(TAPE)
21.
11
12
?
?
EQ PATT. BUTTON
PLAY
MODE(
,)
,
BUTTON :OPTIONAL
17
Back View
1
1615
13
14
Front view
ANTENNA
1. STANDBY/ON BUTTON
OPTION
AM
2. CD
/COUNTER /RDS
BUTTON
(OPTIONAL)
3. MODE/RIF BUTTON
A
4. DISPLAY
X
2
U
R
L
5. REMOTE SENSOR
6. VOLUME +/-
L
3
R
7. CD DOOR EJECT
(OPEN/CLOSE
)
BUTTON
8.
?
TUNING
/
(+)/(-)(
(RADIO)
SKIP/SEARCH BUTTONS(CD)
REWIND/FAST BUTTONS (TAPE)
)
Back View
BUTTONS
?
?
?
/
1.
=TAPE PLAY DIRECTION
( : OPTIONAL)
PRESET (+)/(-) BUTTONS (RADIO)
?CDPLAYBUTTON( )
STOP/CLEAR BUTTON (CD),
STOP BUTTON (TAPE)
Connect the audio output RCA (phono)
type left/right plugs from your stereo TV
?
10.
ANTENNA(AERIAL) CONNECTION
TERMINALS (page 8 reference)
2. AUXILIARY INPUT SOCKETS
BUTTONS
9.
4
or
VCR
or
another
AUX sockets
(page
TIMER BUTTON
9
on
Tape
deck to the
the back of the unit.
reference)
3. SPEAKER CONNECTION
TERMINALS
(page
8
reference)
(OPTIONAL)
4. VOLTAGE SELECTOR
3
DISPLAY
1. PLAY/PAUSE indicator
2.
STEREO
FUNCTION, VOLUME LEVEL,CLOCK,
FREQUENCY, TAPE COUNTER, CD
PLAYING TIME, MDSS, EQ PATTERN
display
kHz
3. PROGRAM
indicator
4. PLAY DIRECTION indicator
5. PLAY MODE indicator
PROG.
REC
RPT
1 ALL
RDS
REC
6. CD REPEAT
MHz
SLEEP
(OPTIONAL)
indicator
1
7. RECORD indicator
8. TIMER indicator
9. RDS indicator
(OPTIONAL)
10. SLEEP indicator
11. FM STEREO indicator
REMOTE CONTROL
1. POWER button
1
23
4
5
2. TUNER/BAND button
7
3. AUX button
89
4. EQ PATTERN button
5. PRESET
(
button
)
6. CD FUNCTION buttons
10
?PLAY/ PAUSE
11
6
(
)
?STOP/ CLEAR
(
?SKIP / SEARCH
(
)
button
button
)
/
button
?REPEAT button
7. MDSS button
8. SLEEP button
12
9. MUTE button
10. VOLUME CONTROL
(
)
button
11. PROGRAM button
12. TAPE FUNCTION buttons
?
RECORD / RECORD PAUSE
button
?
(
)
BACKWARD PLAY button
(
)
:
OPTIONAL
4
?
FORWARD PLAY button
?
STOP button
?
REWIND /FAST button
(
(
)
)
(
/
)
REMOTE CONTROL
Installation Batteries
7m
Approx.
POWER
MDSS
AUX
PRESET
TUNER
/BANDEQ
MUTE
SLEEP
SLEEP
MUTE
MDSS
PATT.
PROGRAM
POWER
VOLUME
PATT.
EQ
AUX
TUNER/BAND
PROGRAMVOLUME
PRESET
REPEAT
Notes
?
Batteries
on
high quality
?
?
(UM-4,
IEC
The remote control device is
R03)" type
designed
for
the range shown in the illustration above.
batteries.
NOTE:
operate
accurately at maximum distance from the
unit, replace the worn out batteries with
Strong light
new ones.
system may interfere with the functioning
Install two "AAA"
and
Do not
type batteries,
correct
use
old
types of batteries
one
with
obstacles between the
of the remote control.
battery polarity (
different
or an
or
remote control device and the stereo
).
together,
?
with batteries.
comes
When the remote control fails to
observing
?
SKIP
D
Range
Your remote control
Use two "AAA
REPEAT
a new one.
When you are not going to use the unit
for a long time, remove the batteries to
prevent possible electrolyte leakage.
5
CONNECTING THE SPEAKER
1.Insert the red wire of the
speaker
BLACK WIRE
L
right/left hand
marked(+)
into the red terminal
at the back of the unit.
RED WIRE
2.Insert the black wire into the black
terminal
marked(-).
NOTE:
RED WIRE
BLACK WIRE
This
speaker system is designed for
magnetic shielding, but the video image
a nearby television may be distorted.
R
RIGHT SPEAKER
LEFT SPEAKER
of
In this case, move the affected television
above 50 cm from the speaker system.
ADJUSTING THE VOLTAGE
(OPTIONAL)
If your set is
power
equipped with a voltge selector at the back side,
supplied before connecting the AC power cord.
be
sure
to set it to your local
ANTENNA CONNECTIONS
(OPTIONAL)
Antenna Exterior FM
FM indoor Antenna
(not supplied)
(aenal)
AM LOOP Antenna
feeder cable
Position it for
Fix it with
the best
a
reception
pin
Antenna Exterior FM
(not supplied)
75
COAXIL
cable
AM LOOP Antenna
AM
AM
or
GND
FM
FM indoor Antenna
SETTING THE CLOCK
1. Press the "CLOCK" button.
the clock is
4. Use the "PRESET
press and
hold the "CLOCK" button for more than
(If
2
seconds.)
2. Select
a
by using
-
The hours
24 hour
cycle
the "PRESET
begin
or
(+)/(-)"
6. Use the "PRESET
or
buttons.
buttons to set
7. Press the "SET" and the correct time is
(24HR)
on
the
display.
8. Press the "CLOCK" button at any time
to display the time for about 3 seconds.
3. Press the "SET" button to confirm the
selected hour
(+)/(-)"
the correct minutes.
cycle
shown
(12HR)
buttons to set
5. Press the "SET" button.
to blink.
12 hour
(+)/(-)"
the correct hours.
already set,
cycle.
6
AUDIO ADJUSTMENT
Volume
?
Adjustment
MDSS(Multi Dynamic Sound System)
Turn "VOLUME" clockwise to increase the
Press the "MDSS" button to reinforce
sound
treble
level,
or
(Hi-Tone), bass(UBB: Ultra
Booster) and surround effect.
counterclockwise to
decrease it.
?
Press "VOLUME
The "MDSS ON"
"button to increase
"
on
the remote
Sound
up.
To cancel it press the "MDSS" button
button to decrease it
What is
RDS
Quality Adjustment
can
a
Reception(OPTIONAL)
stream of data is transmitted in addition
desired sound mode
the "EQ PATT." button
linear
on
by using
to the normal radio
the remote
:
ROCK
: more
information and
POP
:
frequencies
CLASSIC
:
frequency
station/ transmitter
response
bass, more treble
less bass, less treble
Socket.
headphone plug
(3.5mm) into the headphone socket.
The speakers are automatically
disconnected when you plug in the
headphones (not supplied).
MUTE button
(on
remote
example,
answer
the
on
for the radio station
being
a
desired station
by pressing
button.
3. When the RDS transmission is
the
"TUNING(+)/(-)"
the
display
name (PS)
control)
received,
shows the program service
after RDS indicator appears.
NOTES:
?
?
telephone.
The "MUTE" indicator blinks
identification, traffic
list of alternative
select FM.
2. Select
Press this button to mute your unit.
You can mute your unit in order, for
to
a
1. Press the "TUNER/BAND" button to
stereo
a
con
received.
for orchestral music
Headphone
signal. This data
including
tains various information
FLAT
Connect
again.
System)?
RDS(Radio Date System) is a system
gradually being introduced on FM in
many countries, where by an inaudible
choose between 4 fixed sound
impressions:
select
Data
RDS(Radio
control.)
To activate stereo sound
You
"MDSS OFF" indicator
lights
the sound level.
Press "VOLUME
or
Bass
RDS is
only available for FM reception.
PS(PROGRAM SERVICE) NAME
displayed automatically when a RDS
The
is
station is received.
the
?
display.
To recall the
frequency
Press the "RDS" button.
AUXILIARY FUNCTION
1. Connect
an
auxiliary
VCR, via the
rear
device i.e. TV
mounted AUX
NOTE:
or
You
phono
sockets.
can
also record from the
auxiliary input
source, see Cassette Deck Function
Section.
2. Press the "AUX" function button.
7
TUNER FUNCTIONS
To listen to the Radio
2. To memorize the stations in order
1. Press the "TUNER/BAND" button to
select
a
desired
wave
(1)
band.
2. To tune to the desired station with
automatic
(
depressed
tuning, keep
"TUNING
for
more
(+)/(-)
(2)
,
tuning,
,(
than 1 second.
press the "TUNING
)"
or
(3)
(+)/(-)
(4)
button within 1
press the
"MODE/RIF" button for FM stereo reception. The "STEREO" will appear in the
a
weak FM station is
being
Press the "PROG./MEMO." button and
Press the "PROG./MEMO." button
number
(1)Select a desired station.
(2)Press the "PROG./MEMO." button.
(3)Select a desired channel number by
pressing the "PRESET (+)/(-) or
that "STEREO"is cleared from the
NOTE: Use "MODE/RIF"
(Radio
Filter) button to
switch to mono reception if stereo
reception is distorted by noise.
When recording the MW(AM) or LW
Interference
occur.
(1)
(4)Press
If it
the
the "PROG./MEMO"
Press the "PROG./MEMO." button for
(2)
Press the
"
so
that
5.To recall
display.
flashing
channel number
presets
Press and hold the "PRESET
STOP/CLEAR" button
while "RESET" is
adding
desired station.
(1)Select
(2)Press the "PROG./MEMO." button.
(3)Press the "PROG./MEMO." button.
again while the channel number is
flashing.
previously
"RESET" flashes in the
button,while
preset number flashes.
4.To memorize in
once.
2 seconds in TUNER mode
button, while the pre-
set number flashes.
the stations
1.To clear any programme
stored in any memory
"
PRESET
a
Presetting
a
up to 30 stations.
display.
broadcast, beat noises
does, press this button
button to select
3. To memorize in selection channel
received, press the "MODE/RIF" button
so
)"
band.
(+)/(-) (
again while preset number is flashing.
(5) Repeat step (1) to (4) to be memorized
repeatedly.
listening to FM stations,
display.When
wave
preset number flashes.
second
3. When
desired
desired station.
To tune to the desired station with
manual
a
Press the "TUNING
or
button
)"
or
Press the "TUNER/BAND" button to
select
PRESET
in the
"
preset number appears
display.
repeatedly.
8
(+)/(-)
or
button until the desired
or
press it
CD FUNCTIONS
ToplayaCD
1. Press the 'CD' button
repeatedly
display.
appears on the
If no disc is entered in the disc
?
"NO DISC" indicator is
2. Load
"
disc
a
(5)
that 'CD'
so
(6)
drawer, the
(7)
Press
)"
"
"PLAY/PAUSE
button
button
the
on
on
To check
system
system
the remote
or
/MEMO."
con-
/COUNTER" button
"
"PLAY/PAUSE
or
the
resume
on
button
b)Select
the
on
the
play
)" button,
(
on
"
"PLAY/PAUSE
the
button
(8)To
"CD
system
on
or
the remote
con-
To
specify
"
track to
or
"
or
play
desired location
Hold down the
on
b)Select
c)Press
during play
change (of position
repeat play
on
the
Press the "REPEAT" button.
?
Once, one track will repeat( RPT 1).
Two times, all tracks will repeat( RPT ALL).
Three times, "REPEAT" mode is cancelled.
?
Programme play (this
playback.)
?
cannot be set
A maximum of 20 tracks
(1)Press
(2)Specify
(3)Press
be
stop
a
(9)To
play
by using
the
or
has been
entered,
programme sequence
"
"
STOP/CLEAR" button
(10)If you press the
during programmed play, the "PROGRAM"
indicator goes out in the display and the
programmed playback is cancelled.
programmed.
time, if you wish
to
resume
"PROG./MEMO."
and press the
(3).
9
or
the
press the
"PROGRAM" button
programmed playback
"PROGRAM"
button to store this track.
to
changed
button.
the "PROG./MEMO."
erase a
At that
or
flashing
STOP/CLEAR" button.
press the
?It is also erased if the CD drawer is opened.
during
with the
the "PROG./MEMO."
on
stop mode press the "PROG.
/MEMO." or "PROGRAM" button, and then
button.
(4)Repeat step (2)
position
?In the
status.
track to
by
press the "PROG./MEMO." or
"PROGRAM" button once only.
the "PROG./MEMO."or "PROGRAM"
button in
or
can
in
are
mode.
play
d)Repeat step b) to c).
e)After the last(20th) track
CD).
?
?
positions
"PROGRAM" button two times.
down, there will be
continuous
To
position.
mode press the "PROG. /
"PROGRAM" button until "00"
or
button
or
pause.
When the button is held
track in
the track to be added
CD
or
?
or
to the CD normal
from that track number.
a
new
press the "PROG./MEMO." or
"PROGRAM" button again,this is
button
repeatedly during stop or play until your
appears-play will start
?
put the
a
While the track number "00" is
play
"
desired track number
To
the
appears in the track number
the display.
""
STOP/CLEAR" button
a
Press the
?
add
using
the "PROG./MEMO."or "PROGRAM"
MEMO."
the remote control.
on
track
button.
a) During stop
Press the
appears in the
memory, additional tracks may be added
following this procedure.
stop playback
button
position
programme
If less than 20 programme
trol.
?
a new
button to
/COUNTER" button
To
"PROGRAM" button until the
or
or
c)Press
Press the "PLAY
?
"
display.
remote control.
To
programme sequence.
repeatedly.
change an existing programme
a)During stop mode press the "PROG.
play
Press the "CD
the
play
To
trol.
?
a
desired program
To pause the
button to
STOP/CLEAR"
3.To start
?
)"
press the
button, and then press the
"PROG./MEMO." or "PROGRAM" button
displayed.
button.
play back
the "PLAY(
PLAY(
During programmed play
the "CD DOOR EJECT
by using
Press the "CD
tracks.
PLAY(
)
button.
CASSETTE DECK FUNCTION
1.Tape play
(1)Press the
(4)
"TAPE" button to enter the
tape mode
the
so
that "TAPE" appears
on
(5)
PUSH
EJECT", position
to
(6)
open the cassette door.
(3)Insert a recorded cassette with the
exposed tape
to
5.
NOTE
)
(1)
(2)
(3)
press the
backward
play
forward and backward
forward and backward
once
from
play
once
play
for
(1)
(2)
:
Insert
Set to
play mode by pressing the
MODE(TAPE) button repeatedly.
Select
tape into deck.
mode you
can
)onlyandin
record from
(
forward(
).(OPTIONAL)
only
normal
play
to enter the CD mode
recording.
synchronized recording
begins and stops automatically at
auxiliary
or
backward(
tapes.
?
tape is
),
?
(OPTIONAL)
set to auto
backward(
) only
forward(
backward(
)
set to
)
"
or
or
commencing
recording.
.
forward(
or
)
to
.
10
reverse
the CD will restart the
beginning.
CD
synchronized
If you want to record from the
desired track, select the desired
track with the
?If you want to record from
the
If you want to record certain titles
only, programme these before
commencing
recording.
the
by pressing
(TAPE) button.
set to
so
NOTE:
the "CD
mode
?If you want to record
to
(5)
blank tape into deck.
tape function by pressing the
a
)
that 'CD' appears on the display.
Press the "CD SYNC." button to start
a
PLAY MODE
mode
Press the "CD" button
current track from the
Use
record forward
or
(4)
"TAPE" button.
(3)
blank
a
The CD
source
NOTE
play
Select
When the
Radio, CD
to the selected
end.
Tape counter reset function
During tape stop or play press
Recording
or
button
a
repeatedly
/COUNTER" button.
4.
OPTIONAL)
disc.
a
you
backward
six times.
3.
:
Insert
can
only
=
Load
(
only
=
indicator
OPTIONAL)
or
In
mode)
MODE(TAPE)" button
during tape function or recording from
another function.(OPTIONAL)
or
to
again
tape synchronized recording
: Use only normal tapes.
PLAY
Press the "PLAY
forward
button
to the direction of REC
begin recording
CD to
"
=
:
"
button again.
display.
direction.
tape is
STOP/CLEAR" button.
2. To select a play mode (reverse
(
or
the
on
REC
press the
(4)Press the "PLAY "(or PLAY
:OPTIONAL) button to begin tape
playback.
(5)To manually change the tape play
directions, press the opposite PLAY(
currently playing.(optional)
(6)To stop playback at any time,
"
Press the
"
REC
REC" blinks
begin recording
side down.
button from the direction the
play.
"
Press the
"
"
the
function that you want to
a
record and
display.
(2)Press
Select
"
button before
CD
synchronized
TIMER FUNCTION
With the TIMER function you can have the
radio reception and recording, CD play,
tape play
or
auxiliary
recording
turned
source
7. Press the "SET" button to confirm the
hour to switch
and
play
display
and off at the time
on
8. Set the minute to switch
desired.
the "PRESET
1. Check the current time.
(+)/(-)"
timer
"
"OFF"
TIMER" button to enter the
setting
TIMER" button
and the
more
than 2
appears in the
on
(TUNER-CD-TAPE)
display in turn.
Each
the "PRESET
14.
display
""
been
desired
operating mode.
recording and play
TUNER play only
REC: TUNER
or
(+)/(-)"
by pressing
the
buttons.
appears and the timer
setting
has
completed.
switched
17. To cancel
system off.
on
or
automatically
and off at the time set.
check the timer.
Each time the
"
TIMER" button is
you can select the timer set
cancel. You can also check the timer
pressed
buttons
and press the "SET" button. The hour
with ON display flashes.
?If you have selected the CD
ignore step 4.
by pressing
buttons.
The selected function is
TAPE
(+)/(-)"
(+)/(-)"
the volume
16. Switch the
5. When you have selected the TUNER,
Select the previous memorized preset
number with the "PRESET
by pressing
buttons.
15. Press the "SET" button.
for about 3 seconds.
?If you have selected the CD
ignore step 4.
Adjust
"PRESET
Press the "SET" button to confirm the
PLAY:
(+)/(-)"
13. Press the "SET" button.
flashing.
4. If you select the TUNER,
"REC" and "PLAY" flash in the
alternately
display.
12. Set the minute to switch off
flashes in
3. Press the "SET" button when the desired
function is
The hour with
11. Press the "SET" button.
time
display.
function
the
on.
flashes in the
the "PRESET
seconds.)
memorized timer
previous
""
now
10. Set the hour to switch off
you want to correct the previous
memorized TIMER, press and hold the
The
by pressing
mode.
(If
"
on
buttons.
9. Press the "SET" button to confirm the
minute to switch
2. Press the
The minute with "ON"
on.
flashes.
setting
status.
To activate
,TAPE
"
or
or
check the
TIMER" button
so
timer, press the
that
""
lights
up in the display.
To cancel the TIMER, press the timer
6. Set the hour to switch
"PRESET
(+)/(-)"
on
by pressing
the
button
buttons.
so
that
disappears.
11
""
in the
display
SLEEP FUNCTION
(remote
1. To select the time to turn off
you
onds. This
off
for about 5
means
that the
only)
NOTE:
Press the "SLEEP" button.
can see
control
system
If you press the "SLEEP" button while the
sleep time is displayed, the SLEEP time is
sec-
reset.
turns
after 90 minutes.
automatically
Each time the button is
pressed
3. To turn off the
the time
interval before it turns off is reduced
sleep
function
If you wish to stop the function press the
"SLEEP" button repeatedly until 10
by
10 minutes. i.e. 80...70... etc.
appears, and then press the "SLEEP"
button once again while 10 is displayed.
Select the desired time to turn off.
2. To check the time to turn off
While the
sleep
function is active press
briefly. The time
the "SLEEP" button
remaining
until it turns off is
displayed
for
about 5 seconds.
SPECIFICATION
AMP
CD
Output Power(6Ω, 2ch,T.H.D 10%):
Frequency Response: 40~18,000Hz
20W+20W
S/N Ratio: 70dB
Frequency Response: 42~25,000Hz
T.H.D: 0.2%
FM
Dimensions(WxHxD):180x248x241mm
Weight(net): 4.7 kg
Power Requirements:
Refer to the back panel of the unit.
Speaker System
Impedance: 6Ω
Rated Input Power: 20W
Max Input Power: 40W
Frequency Response: 70~18,000Hz
Dimensions(net):
160(W)x248(H)x175(D)mm
Weight(net): 2.02 kg
Tuning Range(optional):
87.5~108MHz
or
65~74MHz,
87.5~108MHz
S/N
Ratio(98.1 MHz)
:64/55dB(Mono/Stereo)
AM(MW)
Tuning Range(optional):
522~1,611kHz,530~1,720kHz
530~1,610kHz
or
DECK
S/N Ratio: 43dB
Channel
Separation:
50dB
NOTE:
Designs and specifications are subject to
change without notice for improvement.
12
P/NO
:
3828R-A040B
Download PDF

advertising