LG | LH-C3603SE | LG LH-C3603SE Owner’s Manual

LGEGF_LH-C3603SE.NA3ULLA_ENG_124T
DVD/VCR COMBI RECEIVER
Combi Receiver
System
OWNER'S MANUAL
MODEL: LH-C3603
(Main Unit: LH-C3603SE
Speakers: LHS-36SES, LHS-36SEW)
CD-R/RW
PAL
Before
please
connecting up, operating or repairing this
read this instruction booklet carefully and
product,
completely.
CAUTION
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
shock to persons.
purchase.
This
an
The exclamation
point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Model No.
Serial No.
Date of Purchase_________________________
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Notes
on
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
______________________________
______________________________
concerning
the Power Cord
Most appliances recommend they be placed upon
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain.
a
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could
result in electric shock or fire. Periodically examine the
cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
Protect the power cord from
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the
appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
.30-31
PlayingaDVDorVideoCD.
GeneralFeatures.......................30
Contents
.
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
RemoteControl.........................9
RearPanel............................10
InstallationandSetup.
.
.
.
.
.
.
.
.
.11
.
ConnectingtoaTV.....................11
Accessory Audio/Video (A/V) Connections to
DVD/VCR Combi receiver ................12
RadioAerialConnections................12
SpeakerSystemConnection..............13
SpeakerPositioning.....................14
Mini Glossary for Audio Stream &
Surroundmode.........................15
SoundMode...........................15
.16-20
BeforeOperation-VCRpart.
.16
TuninginavideochannelonyourTV.
.16
Using your receiver for the very first time
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheclockManually................17
Tosetthecoloursystem.................17
Howtousethemainmenu..............18
.18
Tuning in TV stations Automatically
.19
TuninginTVstationsManually.
.20
ChangingtheorderofTVstations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations...................20
.21-25
BeforeOperation-DVDpart.
On-ScreenDisplay......................21
InitialSettings.......................22-25
GeneralOperation....................22
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................22
MenuLanguage....................22
DiscAudio/Subtitle/Menu.
.22
DISPLAY...........................23
.
.
.
.
.
.
.
.
.
.
TVAspect.........................23
DisplayMode......................23
ProgressiveScan...................23
AUDIO.............................23
5.1SpeakerSetup..................23
.23
DynamicRangeControl(DRC).
.
.
.
.
.
.
.
Vocal.............................23
OTHERS...........................24
PBC.............................24
AutoPlay..........................24
DivX(R)VOD.......................24
LOCK(ParentalControl)................25
Rating............................25
.25
Password(SecurityCode).
CountryCode......................25
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Playingatape.......................26-30
.26
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.26
.27
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.28
.29
IfTimerrecordeventsOverlap
.29
Change (Deleting) the Timer Programme
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTITLE...............30
.30
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................30
.30
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.31
SlowMotion.........................31
Random............................31
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................31
Repeat.............................31
3DSurround.........................31
TimeSearch.........................31
Zoom..............................32
MarkerSearch.......................32
SpecialDVDFeatures...................32
TitleMenu..........................32
DiscMenu..........................32
CameraAngle.......................32
.32
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
.
Subtitles............................32
.33
PlayinganAudioCDorMP3/WMADisc
.34
AudioCDandMP3/WMADiscFeatures
Pause..............................34
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................34
RepeatTrack/All/Off...................34
Search.............................34
Random............................34
RepeatA-B..........................34
3DSurround.........................34
ProgrammedPlayback.....................35
.35
RepeatProgrammedTracks.
.35
ErasingaTrackfromProgramList
.35
Erasing the Complete Program List
ViewingaJPEGDisc......................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................36
StillPicture..........................36
MovingtoanotherFile.................36
Zoom..............................36
Torotatepicture......................36
To listen to MP3/WMA music watching picture
.36
SpeakerSetup.........................37
.38
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................38
PlayingaDivXMovieDisc................39
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.40-41
.
OnScreenDisplay....................40
TapeCounterMemoryStop.............40
.40
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............41
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................42
LastSceneMemory...................42
ScreenSaver........................42
VideoModeSetting...................42
CopyingfromDVDtoVCR................43
.43
Recording from another video recorder
RadioOperation........................44
.44
PresettingtheRadioStations
ListeningtotheRadio..................44
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.
.44
.45
.45
Mute...............................45
TuningintoaStationManually
Tuning into a Station Automatically
.
Operation....................26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference....................46
LanguageCodes.......................46
CountryCodes.........................46
Troubleshooting.....................47-48
Specification........................49-50
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during operation and indicates that the function explained in this
owner's manual is not available
This manual
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
on
that
specific
DVD
video disc.
Notes
Discs
on
location.
Symbol
Handling
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the presimportant operating and maintenance
servicing instructions.
ence
/
of
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
one
to the disc
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the following symbols
represented by the sym-
bol.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA Discs
spray intended for older
JPEG
JPEG Discs
DivX
DivX Discs
Setting
the
vinyl
Output
records.
Source
You must select one of your output
VCR) to view on the TV screen.
sources
(DVD
or
If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
?
until DVD indicator
source
on
the front
of DVD deck is viewed
panel lights
on
the TV
and
output
screen.
If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
?
until VCR indicator
source
4
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
of
Types
Playable
Discs
Regional
code
This DVD
player is designed and manufacplayback of region "2" encoded DVD
software. This unit can play only DVD discs
DVD
tured for
(8cm/12cmdisc)
labeled "2"
Video CD
(VCD)
(8cm/12cmdisc)
Notes
Audio CD
?
(8cm/12cmdisc)
on
or
"ALL".
Regional
addition, this unit plays DivX file, DVD -R, DVD +R,
-RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
al code or the disc cannot play.
In
DVD
?
2
player's region-
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
Notes:
?
Depending
ment
or
on
the conditions of the
the CD-R/RW
(or
DVD
recording equip-
-R, DVD +R, DVD
-
RW, DVD +RW) disc itself, some CD-R/RW (or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be
?
?
played
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
use
shaped
or
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
DVDs and Video CDs
Notes
on
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Copyright 1996, 2003
Inc. All rights reserved.
are
Systems,
Systems,
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
media, meaning the DVD
erased and re-recorded.
4.38
Gigabytes
much. There
only
two standards for
are
content
Single-sided
discs
can
can
and double-sided discs hold twice
are no
dual
layer single
be
hold
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
as
sided recordable
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
Title
discs.
A title is
VCD
and cast interviews could be title 3. Each title is
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
stereo sound.
MPEG
assigned
easily.
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
enabling
Chapter (DVD video discs only)
chapter is a segment of a title such
film
popular compression format used for digital
files that yields very high near-CD quality.
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
a
as a scene
series. Each
in
a
is
may not be recorded.
On
a
interview in
you to locate it
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
or one
Scene
MP3
audio
reference number
A
MPEG is
MP3 is
a
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
JPEG
A distinct element of audiovisual
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
track of video
DivX is the
name
which is based
on
of
a
the
revolutionary
new
standard for video.You will be able
6
using
new
video codec
MPEG-4
compression
to play DivX
this DVD/CD/VCR receiver.
as
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
DivX
movies
information, such
the
of audio.
(with multiple angles)
one
and several tracks
Front Panel
OPEN/CLOSE
Opens
or
closes the disc
(Z)
EJECT(Z)
tray.
Pause
of
playback
tape
a
Press
repeatedly
Tray (DVD deck)
a
disc in the DVD
or a
or
Introducin
VCR deck
remote control here.
Insert
tape in the VCR deck.
PAUSE/STEP(X/C)
Remote Sensor
Point the DVD/VCR Combi receiver
Disc
the
Ejects
for
temporarily.
frame-by-frame playback.
STOP
disc here.
Stops playback
of
a
disc
PLAY
To
back
play
recorded
a
tape
or
or
(x)
tape.
(B)
disc.
REC/ITR
(z)
normally or to
Timer Recording.
To record
activate Instant
INPUT SELECT
Select the VCR deck's
(Tuner, A1,
A2
Cassette
Compartment
(VCR deck)
source
or
AV3)
Insert
a
video cassette here.
PROG./
PRESET
Display
window
DVD/VCR
Select
on
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG./PRESET
(+/-)
through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
To
scan
up
or
down
FM/AM
To
change
VIDEO/AUDIO
between AM and FM bands.
(Left/Right)
Connect the audio/video
output of an external
system, TV/Monitor, Another VCR).
source
Reverse SKIP/SCAN
DVD: Go to
beginning
of current
chapter/track
or
to
(S/Q)
previous chapter/track.
Press and hold for two seconds for
VCR: Rewinds the
tape during the STOP mode
or
a
for fast
fast
reverse
reverse
search.
picture
search.
Forward SKIP/SCAN
DVD: Go to NEXT
chapter/track.
(R/T)
Press and hold for two seconds for
a
fast forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON
Switches the DVD/VCR Combi receiver ON and OFF.
Turn the knob clockwise to increase
volume,
counterclockwise to decrease the volume.
7
Display
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
a
Window
disc is
deck.)
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
Recording
a
tape.
Indicates the unit is
playing
back
a
tape
recorded in Hi-Fi.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
TITLE
CHP/TRK
Hi-Fi
DVD
VCD BIL
P/SCAN ST
II PROG
PROLOGIC
RADIO
MP3 TV
RPTALLAB
Total
Indicates current
track
chapter,
number, title
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
BIL indicator
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
stereo broadcast is
JPEG disc inserted.
Progressive
8
scan
indicator
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
OPEN/CLOSE, EJECT (Z)
Switches DVD/VCR Combi receiver ON and
-
OFF.
-
0-9 numerical buttons
Selects numbered
options
in
a menu.
EJECT
POWER
OPEN/CLOSE
PROGRAM
Accesses
Program
or removes
Removes
CD/DVD/VCR select buttons
Select the
VCR)
CD/DVD
FM/AM
VCR
track number
on
the
as
on
the
AV
Press to clear
tuner memory.
AV
in the
option
menu.
onscreen.
(b/B):
TUNING
CLEAR
SOUND MODE
AUDIO
setup
menu.
Records
normally
or
DISPLAY
CLK/CNT
-
PR/TRK/PRESET
SET UP/ i
Timer
DVD: Search
-
TUNING-
(z)
backward*/go to beginning
chapter or track or go to
previous chapter or track.
TUNING+
or
for fast
reverse
picture
RETURN
DISC MENU
DVD: Search
VCR: Advances the
or
forward*/go to next
chapter or track.
tape in STOP mode
for fast forward
picture
STOP
Selects
REC/ITR
BACKWARD
PAUSE/STEP
PLAY
Starts
point during playback.
MARKER SEARCH
a
subtitle
Momentarily
menu.
language.
silence the
speaker
of the
DVD/VCR Combi receiver.
STOP
PAUSE/STEP
PLAY
MARKER
SEARCH
S-TITLE
MUTE
ANGLE
REPEATA-B
REPEAT
TV/VCR
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
Enlarges
DVD video
image.
TITLE
CM SKIP
SPEED
TITLE
ZOOM
(X)
playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
volume.
MUTE
FORWARD
(A)
Pause
DVD disc.
(+/-)
S-TITLE
seconds.
Stops playback.
menu on a
MARKER
Displays
PR/TRK/PRESET
search.
*Press and hold button for about two
into
DISC MENU
Marks any
search.
(>)
frequency
SEARCH
seconds.
FORWARD
menu.
Displays functions on the TV screen.
Acknowledges menu selection.
Adjusts speaker
tape in STOP mode
*Press and hold button for about two
setup
radio stations
a
VOLUME
ENTER
of current
VCR: Rewinds the
Enter
Accesses
OK
MEMORY
Recording.
(.)
remove
or an
the tuner.
-
activates Instant
BACKWARD
language (DVD)
(CD).
OK/MEMORY/ENTER
RETURN
REC/ITR
audio
an
audio channel
SET UP/ i
Access or
To tune in the desired radio station.
Removes the
SOUND MODE
Selects
PROGRAM
Select programme of VCR or Tuner
Adjusts manually the tape's picture
-
Introducin
source
AV3).
AUDIO
PR/TRK/PRESET(v/V):
-
or
bands)
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
(left/right/up/down)
an
AV2
and AM
PRO
Switches among the clock, tape counter
tape remaining modes on the display.
Selects
or
screen.
Selects sound mode between
display.
and
-
listening choice. (FM
(Tuner, AV1,
DISPLAY, CLK/CNT
b/B/v/V
the
Selects the VCR deck's
menu.
preset stations from the
Accesses On-Screen
(CD/DVD
source
the TV
on
Select the DVD/VCR Combi receiver's tuner
program menu or a mark
MARKER SEARCH
a
output
to view
FM/AM Tuner select button
menu.
CLEAR
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
Displays
the disc's Title menu,
if available.
REPEAT A-B/SPEED/REPEAT
-
RANDOM
-
-
(G)
Repeat chapter, track, title,
Repeats sequence.
Selects recording speed.
all.
playback.
ANGLE
Selects
a
DVD
camera
angle
if
available.
CM SKIP
Fast forwards
picture
search
seconds
Play
through 30
of recording.
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
the
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
9
Rear Panel
AC Power Cord
Plug
into the power
source.
ANT.IN
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
Connect to
a
(Y
TV with Y Pb Pr
Connect the aerial
using
this
jack.
Pb
Pr)
inputs.
RF. OUT
Connect to
a
TV with RF cable.
DVD/VCR OUT VIDEO OUT/AUDIO OUT
FM ANTENNA CONNECTOR
(Left/Right))
Connect the FM antenna to this
Connect to
a
TV with video and
audio
terminal.
inputs.
VCR IN LINE 1
(VIDEO
IN/AUDIO IN
Connect the audio/video
external
(Left/Right))
output of
an
(Audio system,
TV/Monitor, another VCR).
source
S-VIDEO OUT
Connect to
a
S-Video
(DVD OUT)
Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
Electrostatic
pins of the jacks on the rear panel.
discharge may cause permanent damage to the
Remote Control
Point the remote control at the remote
remote
Angle:
remote
Remote control
Operation Range
press the buttons.
Distance: About 6m
sensor
unit.
and
battery
Detach the
installation
battery
of the remote
(20ft)
from the front of the
AAA AAA
R03
sensor
cover on
the
control, and insert
batteries with
(size AAA)
aligned correctly.
rear
two
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
Tips
Depending
Setup
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Caution
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
ding
2.
in
jacks
jacks
on
on
the DVD
the TV
using
Connect the Left and
Right
Player to the corresponthe Y Pb Pr cable. (C)
AUDIO OUT
jacks of
left/right in
cables. (A)
this unit's DVD/VCR OUT to the audio
jacks
on
the TV
using
the audio
Notes:
Set the
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
in jack (record deck) of your audio system.
phono
Make one of the following
on the capabilities of your
connections, depending
OUT to the video in
jack on
jack on
InstaliodSeup
using
Press STOP and hold it for five seconds before
it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
releasing
s
this unit's DVD/VCR
the TV
Remove any disc from the unit and close the disc
on the
display window.
tray. See that "NO DISC" is displayed
2)
(AV)
Connect the VIDEO
1)
existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's INPUT to
COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV'
INPUT to S-VIDEO.
Basic connection
Progressive to "On" on the setup menu for
progressive signal, see page 23.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
to a TV
Connecting
1.
1.
on
the video
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
Rear of this unit
(DVD
exclusive out
connection)
cable.(V)
2.
Connect the Left and
AUDIO
Right
jacks of this
left/right in
cables. (A)
unit's DVD/VCR OUT to the audio
jacks
on
the TV
using
Basic connection
1.
the audio
(RF)
Connect the antenna cable from your indoor/ outdoor antenna to ANT.IN jack on the rear panel of
this unit.
2.
Connect the
RF.OUT
on
the
television's Antenna
Video
Component
RF antenna cable from the
supplied
jack
panel
Input. (R)
rear
(Color
of this unit to your
C
(for DVD)
1.
Rear of TV
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
in
2.
jacks
jacks
the TV
on
the unit to the
on
using
Connect the Left and
on
the TV
using
Y Pb Pr
an
the
Pr
Connect the S-VIDEO OUT
this unit to the
S-Video in
S-Video cable.
jack
on
the TV
Pb
AUDIO INPUT
Y
S-VIDEO
ANTENNA
INPUT
INPUT
R
AUDIO OUT
A
V
S-Video connection (for DVD)
1.
COMPONENT/PROGRESSIVE
SCAN VIDEO INPUT
VIDEO
INPUT
corresponding
cable. (C)
jacks of
to the audio left/right in
audio cables. (A)
Right
this unit's DVD/VCR OUT
jacks
S
Stream ) connection
jack on
using the
R
(S)
2.
Connect the Left and
Right
AUDIO OUT
jacks of
left/right in
cables. (A)
this unit's DVD/VCR OUT to the audio
jacks
on
the TV
using
the audio
Progressive Scan (ColorStream Pro)
If your television is
connection
high-definition
"digital
ready" television, you may take advantage of the
DVD Player's progressive scan output for the
highest video resolution possible.
a
or
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive
Scan
on
the unit.
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable, do
not connect the yellow video cable.
11
Accessory
(A/V) Connections
Audio/Video
to DVD/VCR Combi
receiver
Connect the AV3
jacks
on
the DVD/VCR Combi receiver to the audio/video out
jacks
on
your accessory
component, using the optional audio/video cables.
Device Jack Panel
Accessory
Front of this unit
VIDEO
OUTPUT
AUDIO
OUTPUT
R
L
OR
Rear of this unit
Radio Aerial Connections
Connect the
supplied FM/AM
loop aerial
aerial for
listening
to the radio.
?
Connect the AM
to the AM aerial connector.
?
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
(supplied)
(supplied)
Notes
12
?
To
prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
?
Be
sure
?
After
fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
to
as
horizontal
as
possible.
Connection
Speaker System
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround
cords.
sound, adjust the speaker parameters; distance, level,
Front
Speaker
(Right)
etc..
Front
Centre
Speaker
(Left)
Speaker
InstaliodSeup
Subwoofer
Rear
Speaker
(Right Surround)
Rear Speaker
(Left Surround)
Notes
?
?
Be
sure
to match the
speaker
cable to the
appropriate
terminal
reversed,
the sound will be distorted and will lack base.
If you
front
use
speakers
with low maximum
input rating, adjust
on
the
components:
the volume
carefully
+
to
+
and
--
to
--.
If the cables
to avoid excessive
output
on
are
the
speakers.
?
Do not
remove
the front
cover
of
supplied speaker.
13
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2
speakers
rear
and
subwoofer).
If you want to
a
?
?
play
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
distance. And
equal
same
height.
But
by hearing position
normally place
it above
set up the
or
below the
television.
?
Rear
speakers
Place left and
right
for surround sound
position
ers
?
behind the
playback.
and install them at
towards
a
of
wall
In the
case
other,
and set the
a
or
or
ceiling
smaller
rear
listening
For best
These
results,
speakers
disperse
speakers
-
90
speakers
rear
ears.
atmosphere required
listening
direct the rear speak-
too far behind the
It is also effective to
the sound.
size, if the audience is
above 60
recreate sound motion and
do not install the
above the level of the listener's
to further
room
area.
cm
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front Speaker
(Right)
Rear Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
14
each
Mini
Glossary
for Audio Stream
produce a 3D Surround effect, using 3D
technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
& Surround mode
Allows you to
can
Surround Sound
discrete channels of
enjoy 5.1(or 6)
3D SURROUND
This unit
high
ten to multi-channel audio from
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
a
home theatre. This feature
quality digital
works with DVD discs encoded with
discs,
Dolby Digital
DTS
Digital Surround delivers up to 6 channels of transparaudio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
ent
sound field. The term DTS is
Technology,
Technology,
a
trademark of DTS
LLC. Manufactured under license from DTS
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy,
and improved dynamic range.
Use this mode when
nel which carries the
effect of
being
effect with
DOLBY
in
"
which
PRO
LOGIC
can
"
Dolby Digital 2 chanThis mode provides the
or
mark.
movie theatre
a
intensity
an
movie
playing
"
or
live concert house-an
only
SURROUND.
be obtained
The
through
effect
of
according
to the way it
signals
Logic
This is done
You
can
one
of the
enjoy surround sound simply by selecting
pre-programmed sound fields according
any
spatial properties
new
sounds
or
of the
to
the
program you want to listen to.
Press SOUND MODE
repeatedly until the sound
display window as
mode you want appears in the
below.
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
→
PL2 MUSIC
→
PL2 MATRIX
BYPASS
When DVD is inserted.
You
can
change
the stream of DVD
(Dolby Digital, DTS,
on
the remote dur-
output chan-
used.
an
advanced, high-purity matrix surround decoder that
the
played
using
II creates five full-bandwidth
sources.
is
recorded.
was
ing playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
(II)
Dolby
and
BYPASS
Software with multichannel surround audio
PCM, etc) by pressing the AUDIO button
nels from two-channel
Logic
the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Pro
Pro
Sound Mode
LLC.
"
Dolby
audio tracks.
original recording
extracts
without
adding
tonal colorations.
Each time you press AUDIO button, the sound mode of DVD
changed as the following order;
is
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and
all programs encoded in Dolby Surround. The result is
enhanced soundfield directionality that approaches the
quality
of discrete 5.1-channel sound.
For your reference
?
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
use
?
includes controls that allow the sound to be tailored to individual
listening
The DVD/VCR Combi receiver memorizes the
last mode
MUSIC mode:
tastes.
settings
for each source
You
identify
individually.
encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
can
the
-
MATRIX mode:
-
The Matrix mode is the
same as
the Music mode
except that
the directional enhancement
logic is turned off. It may be used
signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo reception may be simply to
to enhance
-
mono
force the audio to
mono.
Note
?
When you play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
15
Before
Tuning
in
a
Operation-VCR part
video channel
on
your TV
6.
+ or
on
-
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Notes
The
Press PROG.
more
The
of this video recorder
output frequency
(VCR) is set at UHF channel 36. If channel 36
is already used by another TV station, or if the
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
8
will show you how to change the output
frequency of your VCR.
screen.
~
Your TV receives
recorder
from the video
7.
on your TV
that you may watch video
tapes. If you have used AUDIO and VIDEO
cables then your TV should already have a
and tune it in
a
channel number
usually
Press PROG.
You
Make
VCR
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2.
on
on
8.
your TV.
Select
a
STANDBY/ON
watch video's.
VCR and
Don't worry if you don't have a video-tape to
stage! If you switch your VCR on and
stages 3
play
con-
4, instead of seeing video play-
~
back tune your TV until you
see a
bright
TV channel number
blue
on
when you have finished.
Tune this channel so that
Note
at this
to select another video channel.
which you wish to
on
watch video's.
appears.
Store this channel
your VCR.
-
can
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
tinue
+ or
ence
Press
1.
36
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
RCA lead.
so
dedicated video channel built into it,
called AV.
CHANNEL
You may select any channel number between 22
and 68.
like another TV station. You
(VCR)
have to select
signals
RF
P
SET
R
Make
sure
on
a
the front of your VCR
bright
blue
screen
your TV.
that you have correctly installed your
successfully tuned in a dedicated
video channel
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video
tapes!
screen.
3.
Tune this channel until the video
picture
is
sharp
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
optimum
4.
video
playback
already pre-tuned
for
your TV.
on
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
out
Only carry
stages 5
obtain clear video
stages 1
16
displayed).
time
Following picture
will
display
a
To make
tuning
3 to 4
shown "ACMS"
as
TV stations,
the TV
screen
please follow stages
(see p.18).
8 if you cannot
as described in
TV channel number
on
when you have just connected your video
recorder for the very first time.
~
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
for the very first
playback
4. Select
~
Using your VCR
ACMS
Pr-12
ACMS
Setting
the clock
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
To set the colour
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYSTEM and press OK.
Press 3
or
4 to select
Press i.
Press 1
or
2 to select TIME DATE.
Press OK.
system
4.
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
VCR
REC
TIME
DATE
Dr.
E
fOS
ON
OFF
2.
Use the numbered buttons
to alter the
OPR
the remote control
on
HOURS, MINUTES, DAY, MONTH and
Press 1
or
2 to select the RF AUDIO.
YEAR.
Press 3
or
4 to select
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
used.
The
day
of the week will appear
5.
according
to the RF AUDIO
automatically
when you enter the year.
VCR
REC
E
Dr.
fOS
ON
OFF
OPR
HHMNDDMMYY
8
:.
00101
.
SUN
6.
Press i to
remove
the
menus
from the TV
screen.
TIME
DATE
3.
If you make
a
mistake press 1
or
2 and enter the
correct details.
4.
Press i.
17
How to
using
This VCR
the
Tuning
menu
easily be programmed by using
displayed on screen.
can
menus
The
the main
menus are
controlled from the Remote
Control Handset.
on your TV set and video recorder
the POWER button.
ing
by
press-
Press i button.
2.
The main
on
the TV
problem please
ING section
1.
2.
will appear
menu
Automatically
If the TV broadcast signal is weak your VCR
may not detect the necessary information and
will not be able to store them correctly. To overcome
this
Switch
1.
in TV Stations
turn to the MANUAL TUN-
page 19.
Press POWER to turn
your VCR.
on
Press i button.
The main
screen.
on
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press OK.
VCR
P
SET
R
ON
OFF
Pr-12
ACMS
Dr.
NIC
fOSD
OPR
VCR
12
REC
P
SET
R
REC
Timer
recording setting (see p. 28).
PR SET Manual tuning setting (see p. 19).
ACMS ACMS (Automatic Channel Memory
System) (see p. 18).
TIME DATE Date & clock setting (see p. 17).
SYSTEM To set the Colour TV System
(see p. 17).
Dr. To check a problem with your VCR
(see p. 40).
fOSD ON/OFF To display the operational
-
Pr-12
Dr.
Pr-12
NIC
fOSD
ON
OFF
OPR
-
-
-
O
O
O
-
ACMS
-
-
Pr-12
ACMS
3.
mode of your VCR
O
O
OPR
NIC
-
-
Press OK
(see p. 40).
improve the playback picture
(see p. 26).
To
To activate
digital
to start the automatic
tuning
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
deactivate the NICAM
or
sound
again
process.
(see
p.
41).
S
E
Pr-12
ACMS
Tip
You
can
setup
3.
change the menu language on the DVD
(See the Menu Language on page 22.)
menu.
Press 1 and 2 to select the desired
Press OK and press 3
4.
Press "i" to return to
a
or
TV
menu.
4.
The TV STATION TABLE will appear when
is complete.
Press i to
save
picture.
settings.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P SET
R
18
your
4 to select.
PR-07
PR-08
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
areas
of the
4.
Manually
will
stop when it locates
a
station.
Press 2 to select MFT.
country broadcast signals
may be too weak for your DVD/VCR Combi
receiver's automatic tuning process to find
assign TV stations correctly.
Searching
Press 3
or
4 to
adjust.
or
PR
CH
09
C10
MFT
STATION
You must tune in these weaker broadcast
stations
manually
in order for your DVD/VCR
CHANNEL/CABLE
:
AV
PSET
R
Combi receiver to store them.
1.
Press i.
5.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
Press OK.
PR
CH
01
MFT
STATION
00
PR-01
PR
C09
CH
MFT
C10
00
STATION
VCR
Pr-12
REC
ACMS
ON
OFF
2.
Dr.
CHANNEL/CABLE
NIC
fOSD
:
AV
P
RSET
P
SET
R
OPR
6.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
(for example,
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR
Press 3
or
the
station
new
Press 1
or
4 to select letters and numbers for
09).
DELETE
:
back and forth between
Press OK.
PR
C09
PR-08
:
move
characters.
PR-07
MOVE
name.
2 to
CH
STATION
MFT
C10
00
,
P
RSET
3.
Press OK.
Press AV to select C
(Standard stations)
or
7.
S
(Cable stations):
C02
-
C69, S01
-
Your
S41.
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
required
Press i, confirm the station
Press i again.
station.
or use 3 or
4
new
TV station has
If you wish to
7.
stages 1
manually
12
13
09
MFT
--
STATION
14
15
----
16
CHANNEL/CABLE
:
AV
tune other stations
repeat
-
11
CH
been tuned into your
VCR.
10
PR
now
placement.
P
SET
R
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
--
--
-----
-----
MOVE
:
DELETE
:
,
P
RSET
19
the order of TV Stations
Changing
After
TV stations into your DVD/VCR Combi
change the order in
tuning
TV Stations
Deleting
After
TV stations into your DVD/VCR Combi
tuning
receiver you may wish to
receiver you may wish to delete a station.
which
The instructions
they are stored without having to retune them
against! The instructions given on this page will
show you how you can simply move them into
your desired order.
1.
how
1.
Press i.
The main
Press 1
Press i.
The main
Press 1
given on this page will show you
delete any unwanted TV stations.
easily
will appear on the TV
2 to select the PR SET.
menu
or
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
MFT
STATION
00
PR-01
01
VCR
Pr-12
REC
PR
CH
MFT
STATION
00
PR-01
01
ACMS
ON
OFF
Dr.
CHANNEL/CABLE
NIC
fOSD
:
AV
P
SET
R
OPR
VCR
Pr-12
REC
ACMS
ON
OFF
2.
Dr.
2.
AV
:
P
SET
R
OPR
Press 3
or
4 to select the
(for
move
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P
R SET
PR-08
:
DELETE
:
01
C02
00
02
C03
00
PR-01
PR-02
03
PR-07
MOVE
or
programme number
example, PR 03).
programme number
(for example,
PR
03)
4 to select the
or
you want to
Press 2.
Press 3
Press i.
you want to delete.
Press i.
Press 3
3.
CHANNEL/CABLE
NIC
fOSD
04
C05
00
PR-04
05
C06
C07
00
PR-05
06
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
3.
PR-07
PR-08
MOVE
:
DELETE
:
,
Press 1.
After
P
SET
R
,
02
a
short
while, the selected station will be
deleted.
4 to select
the programme number you want to
example, PR 05).
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
move
to
01
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
08
C09
00
(for
PR-07
PR-08
MOVE
DELETE
P
R SET
:
:
,
05
4.
Press i to
remove
the
menus
from the TV
If you wish to delete other TV stations
stages 1 3.
P
RSET
screen.
repeat
-
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to
Press i to
move
remove
other TV stations
the
menus
repeat stages
from the TV
1
01
C02
00
02
C03
00
PR-02
04
C04
00
PR-04
05
-
4.
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
screen.
PR-01
MOVE:
P
SET
R
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
P SET
R
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations
ways.
Press 3
or
DELETE
:
,
Stored TV stations:
can
be selected in either of two
4 to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations
numbered buttons
20
on
using
the remote control.
the
Before
Operation-DVD part
On-Screen
You
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
the
the
use
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
the
inputting
setting. You can
appropriate (e.g.
For
number).
press ENTER to execute the
PBC
1/3
b /
B, Numbers
ENTER
mode)
Numbers
Time search
highlighted.
change
the title
(or
item.
the number buttons if
use
Selection Method
Items
Track Number
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing VCD
Some items
screen.
To
Display
0:20:09
ENTER
also
b/Bor
Audio Channel
STEREO
InstaliodSeup
AUDIO
functions,
some
Sound
setting.
3D SUR
b/B
Notes:
Some discs may not
shown below.
?
?
If
no
provide
all of the features
button is
screen
pressed for 10 seconds,
display disappears.
the
Example: On-Screen Display during
playing divx movie disc
on-
Selection Method
Items
Track Number
Playback
1/3
A-B
1/9
Repeat
title
Repeat
sequence
Enter
Marker
MARKER SEARCH
123456789
Time search
Marker Search
language
Digital Audio
Output mode
Action
play
prohibited
MP3
AUDIO
menu
from this
or
Numbers, ENTER
b/Bor
1
and
Subtitle
Resume
0:20:09
Audio
a
B, Numbers
ENTER
Status/Restrictions
TITLE
b /
language
ABC
ENG
Sound
not available
b/Bor
S-TITLE
point
3D SUR
b/B
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
Chapter
Number
1/12
0:20:09
Audio
language
Digital Audio
Output mode
Sound
language
Numbers, ENTER
b/Bor
and
Angle
B, Numbers
ENTER
Time search
Subtitle
b /
AUDIO
ABC
1 ENG
b/Bor
S-TITLE
1/3
b/Bor
ANGLE
3D SUR
b/B
21
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 22 to 25.
To
display
display
the
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
then press
to the second level. The screen shows
option
the selected
item,
as
move
well
as
option
then
for the
language
Use v / V to select the desired
5.
Press SETUP
setting then press
ENTER to confirm your selection. Some items
require additional steps.
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
Setup
menu.
original language
Other: To select another
according
chapter.
reference
to the
If you
track
in which the
language, press number
corresponding 4-digit
language code list in the
enter the wrong language code,
buttons then ENTER to enter the
press CLEAR.
to the third level.
4.
or
a
number
Use v / V to select the second desired
press B to
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
move
Menu
Select
Disc Audio / Subtitle / Menu
Operation
the current
Move
display.
To go back to the previous level:
Press b on the remote control.
22
Disc Subtitle
screen.
To go to the next level:
Press B on the remote control.
3.
Original
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
Disc Audio
and exit the Menu:
Press SETUP to
General
Menu
5.
DISPLAY
Pressing
scan
DISPLAY
TV
Progressive
16:9
Aspect
Display
ENTER will set this unit to
mode.
Mode
Progressive
Scan
Widescreen
Caution:
Off
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
an
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
Move
TV
:
Select when
a
Display
Display
setting
works
only
when the TV
Aspect
Each DVD disc has
on
the
audio
system you
use.
5.1
Select
Speaker Setup
DRC
On
Vocal
On
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
progressive
scan:
Connect component out of this unit to the input of
your monitor/television, set your television or monitor
Component Input.
1. Select
InstaliodSeup
variety of audio output options.
options according to the type of
AUDIO
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
to
tray.
window.
a
Set this unit AUDIO
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
To turn On
display
AUDIO
mode is set to "4:3".
Progressive
the
16:9 wide TV is connected.
DVD
Mode
Mode
a
on
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
standard 4:3 TV is connected.
16:9 Wide: Select when
displayed
Press STOP and hold it for five seconds before releas-
2)
DVD
Aspect
4:3
See that "NO DISC" is
Select
"Progressive
Scan"
on
the DISPLAY
menu
Speaker Setup DVD
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 37.)
Select
With the DVD
Control
format, you
DVD
(DRC)
can
hear
a
DivX
program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
DISPLAY
Aspect
Display
Select
5.1
Dynamic Range
then press B.
TV
Move
Mode
Progressive
Scan
On
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
Off
effect.
Vocal
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
DVD
Set to On
playing.
only
when
a
multi-channel karaoke DVD is
The karaoke channels
on
the disc mix into
normal stereo sound.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
4. When the confirm
Cancel is
to
menu
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
23
OTHERS
The
DivX(R)
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
VOD
DivX
You
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
OTHERS
PBC
Auto
On
DivX(R)
DivX(R)
Off
Play
Your
Select
VOD
Video On Demand
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
Move
PBC
Set
(Done)
Select
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
encrypt
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
If you rent the DivX VOD file, it has several
limits as shown below.
You
Display
View
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
can
If Auto
Play
then
play
the number which you
can
watch the file.
DVD
mode is set to
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
DivX(R)
VOD Rental
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
24
options
viewing
?
Play
file.
Notes:
Audio CDs.
Auto
move
of
LOCK (Parental
Password
Control)
You
LOCK
Rating
Unlock
Password
New
Country
2. Follow
step
"New" is
Move
Input
Select
Some movies contain
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
1.
2.
control feature allows you to block
below the rating you input, there
scenes
3.
your children from being able to view
material you believe is unsuitable.
"Rating"
4-digit code,
verify.
the
then press ENTER.
menu.
Code
display
the
can
Setup
clear it
InstaliodSeup
using
menu.
number "210499" and the
6-digit
on
the LOCK
menu
Enter
a new
code
security
Enter the code of the
then
were
Rating, Password and Country Code
input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
the
must
4-digit code and press ENTER. Enter it
and press ENTER to verify. If you make a
a
mistake before
pressing ENTER,
as
described above.
DVD
Code
press CLEAR.
1.
country/area
used to rate the DVD video
list in the reference
features, you
Input
again
or
to
Press SETUP to
Country
press B.
2. To
(Rating). "Change"
by
preventing
1. Select
new
again
forget your Security
Input
then press B.
code is cleared.
parental
to
shown left
as
menu
If you forget your security code you
the following steps:
alternative.
access
the LOCK
4. Press SETUP to exit the
DVD
for children to view.
The
it
2
on
highlighted.
3. Enter the
Rating
change password.
or
1. Select Password
AE
Code
(Security Code)
enter
can
Select
whose standards
disc, based
on
the
chapter.
Code"
"Country
on
the LOCK
menu
then
press B.
2.
Follow
3.
Select the first character
4.
step
Shift the
2
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
3. Select
a
rating
from 1 to 8
using
the v / V buttons.
5.
Rating
1-8:
tions and
Rating one (1)
rating eight (8) is
has the most restric-
Press ENTER to confirm your
country code
selection.
the least restrictive.
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
25
Operation
a
You will
be able to load and
only
Tape
eject video
cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receiver may also
playback recordings from
Getting a better picture
When
NTSC
tapes (on PAL TV).
To switch off the slow motion and
playback started, the
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
on the front panel to manually
press PROG. + or
adjust the tracking until any distortions have been
a
cassette is inserted and
automatic
-
removed. Press numbered 0
switch automatic
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
5. Slow motion
Playing
on
back
tracking
the remote control to
on
again.
shuttle, press the
desired function.
During
slow motion and
the
on
appear
shuttle, the noise bars may
picture according
to the status of
tape.
If distortions
can
them with D
or
be
seen
in the
picture,
reduce
E.
6. Press STOP to end
playback.
Press EJECT.
If the end of the
tape is reached, your DVD/VCR
stop playback automatically,
rewind, stop, eject the tape.
Combi receiver will
1. Make
sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
Turn
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
on
into your DVD/VCR Combi receiver. The video casfacing up and
sette should have the window side
the
arrow
facing
away from you.
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume
While
normal
playback.
tape is playing press CM SKIP
control to
commercial
skip
playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
material).
Repeatedly
cassette will start
2 Press 60 seconds
2. Press PLAY to start
on
the remote
another programme
(or
press CM SKIP to
skip:
1 Press 30 seconds
automatically.
3 Press 90 seconds
AUTO TRACKING
4 Press 120 seconds
Your VCR will
give
the best
automatically adjust
picture quality.
the
tracking
to
5 Press 150 seconds
6 Press 180 seconds
3. Press PAUSE/STEP to still
Press PAUSE/STEP
a picture.
repeatedly to advance
the
OPR
(Optimum Picture Response)
automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
tape frame by frame.
If you press FORWARD, the picture will be slowed
This feature
down at about 1/19 times the normal
the condition of the
playback. Tapes
paused for up to 5 minutes. After 5 minutes your DVD/VCR Combi receivcan
er
will
stop the tape
be
to
prevent damaging the tape
your DVD/VCR Combi receiver. Still picture quality can be improved slightly by pressing 3 or 4.
or
4. Press PLAY to continue
playing
tape.
1. Press i.
2. Press 1
or
2 to select OPR.
3. Press OK.
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
During playing
VCR
12
12
wind the
tape (7 times normal playback) and
where you are on the tape.
Logic search:
During fast forwarding
FORWARD
played
or
MS
see
ON
OFF
4. Press 3
rewinding press and hold
BACKWARD the picture will be
or
back at 7 times normal
playback speed.
or
4
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
Please note you may
playing
a
only
tape.
5. Press i return to
26
Dr.
C
f
screen.
set OPR when
or
Instant Timer
5.
Recording (ITR)
Instant Timer
Recording (ITR) start recording
a set period of time or until the
for
video cassette
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
record up to 360 minutes. Please note there will be
an
slight loss
using LP.
in
picture
Press REC/ITR to start
and sound
quality
7.
Make
Press PAUSE/STEP to avoid
when
Press POWER to turn
on
your DVD/VCR Combi
receiver.
video cassette with
protection
tab into
your DVD/VCR Combi receiver.
The video cassette should have the window side
facing
3.
up and the
Press 3
or
arrow
facing
4 to select the
away from you.
programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
control.
recording.
displayed
when
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
(L(MONO)/R)/
VIDEO IN terminals
repeatedly
a
tape is paused. After
5
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
8.
Press STOP to end
recording.
Press EJECT.
EJECT will appear
on
the TV
screen
for
few
a
seconds.
Notes:
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
It is
possible to record on a video cassette
protection tab removed by covering
record
4.
unwanted
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
sure
a
recording
If you press PAUSE/STEP during ITR, this
DVD/VCR Combi receiver will enter the record
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
Insert
recording.
Press PAUSE/STEP to continue
this book.
2.
much
scenes.
will be
1.
sound
as
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
a
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
Long Play
Play.
SP will produce improved picture and
quality, however LP will provide twice
recording time as SP.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
immediately
Press SPEED if you wish to record in
Standard
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press AV until the socket you wish to record from
is displayed.
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
AV 1 for
L/R
your TV.
VIDEO
on
recording from AUDIO
(VCR IN AV1) terminals
(VCR
the
IN
rear
AV1)/
of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
(L(MONO)/R)/
the front of your unit.
27
recording using On Screen
Display
Timer
PR
DATE
PR-01
You may set up to seven timer record events
within one month of the current date.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SUMOTUWETHFRSA
Note
Before
the timer make sure that you have
correctly and you know which
stations you have tuned TV stations on your VCR.
setting
set the VCR clock
1.
Insert
a
video cassette with
protection
6.
up and the
2.
facing
arrow
tab into
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times
away from you.
pressing
Press i.
Press 1
or
start and end times of the programme that you
wish to record.
your VCR.
The video cassette should have the window side
facing
Press the numbered buttons to enter the record-
ing
3
or
PR
2 to select REC.
PR-01
Press OK.
PR
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
TIME
190020
::
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
7.
SP
--
Press 2 to select the
SP
--
Press 3
the timer record event.
If all timer record events
DATE
or
--
--
recording speed.
or
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
PR
PR-01
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
DATE
TIME
16
1900
::
2000
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
SP
--
SP
--
tape is left and
necessary, to
~
--
SP
--
tape speed
LP).
speed from SP to LP, if
complete recording the program.
are
::
SP
--
4 to select the desired
TIME
--
SP
--
switches
full press 3 or 4 to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR
SP
--
SP
--
(SP, IP,
setting
SP
--
,
OPR
Press OK to start
SP
--
IP mode determines how much
3.
SP
--
SP
--
Dr.
DELETE:
SP
~
--
SP
--
NIC
fOSD
ON
OFF
Pr-12
ACMS
16
--
SP
--
VCR
P
R SET
DATE
--
TIME
--
by
4.
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
--
SP
--
SP
--
SP
--
8.
Check that the timer event details
are
correct.
Press i twice.
4.
Press the numbered buttons to enter the station
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
that you wish to record.
When selecting stations 1
Press POWER to switch your VCR Standby.
will appear in the display window while your
the channel
-
9, press 0 first, then
number; for example Stations
You may also select Channels
4. Once selected press 2.
3
by pressing
-
3
03.
or on
press AV to select for correct
PR
5.
DATE
the front of your
display (AV1
or
unit,
AV2).
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
one
of the
features. Press 1
entering the date you may
following automated recording
or
2 to
select, then press OK
to
confirm. DLY To record every day (except
Saturday and Sunday) at the same time.
SU
28
SA To record at the
~
same
timer
recording. To watch a
recording standby mode, press
DVD
9.
Press STOP to end
recording.
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press
3 or 4 to select the event that you wish to delete or
change.
SP
the programme.
If you press OK before
select
during
POWER and DVD to switch to DVD mode.
If you wish to record from AUDIO L/R (VCR IN AV1)/
VIDEO (VCR IN AV1) or AUDIO IN (L(MONO)/R)/
VIDEO IN from the back
VCR waits to make the
or
time every week.
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3
or 4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme will always be given priority.
Example:
Programme
1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme 2
will be recorded.)
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press D
the
Example:
Programme
change.
or
1 will be recorded in its
Programme
entirety,
but
only
2 will be recorded.
Programme
If at
tions of the
the last 30 minutes of
the Timer
E to select the event that you wish to delete
Press F to delete the event...or
Press OK to
change,
then press F
or
G to
or
select;
Station, Date, Start and End times and LP.
Press D
or
E to enter the correct information.
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
midnight
00:00 a.m., programme 2 will not be recorded.
29
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
Unless stated
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback side down.
3.
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press PLAY.
In
some
cases, the disc
menu
might
Moving
to another TITLE
When
Use the bBvVbuttons to select the
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
use
disc has
a
more
than
one
title, you
can move
to
another title. Press DISPLAY while
stopped
then the
b / B to
move
You
playback is
appropriate number (0-9) or use
to another title.
play any title by inputting
playback is stopped.
can
appear
instead:
otherwise, all operations described
the remote control. Some features may also be available on the Setup menu.
its number while
Moving
to another CHAPTER/TRACK
When
title
a
disc has
er
?
on a
more
disc has
than
chapter/track
as
one
more
than
track, you
one
chapter
can move
or a
to anoth-
follows:
Press .
or > briefly during playback to select
chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
the next
Use the number buttons to select the track you
?
want to view and press RETURN to return to the
menu screen. Menu settings and operating procedures may differ. Follow the instructions on the
each menu screen. You also may set PBC to Off
(See
"PBC"
on
page
?
press DISPLAY and press v / V to select the
icon. Then, input the chapter/track
chapter/track
24).
numberoruseb/B.
Notes:
?
If
parental control is set and the disc is not within
rating settings you must input the password.
(See "Lock Menu" on page 25.)
the
?
DVDs may have a region code. Your player does
not play discs that have a region code different from
player.
(two).
your
?
To watch
a
The
DVD
region
during
code for this
timer
player
is 2
Search
1.
2.
> for about two seconds
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
.
to select
the
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100
to switch to DVD
With
(forward).
CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
mode.
3.
a
Video
To exit SEARCH
Changing
mode, press PLAY.
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
ferent audio channel
30
or
during playback.
The
recording standby
mode, press POWER and DVD
Press and hold .
a
dif-
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
The DVD
player
Press .
2.
The
T
during
or
pause.
> to select the
1/16, t 1/8, t 1/4
1/16, T 1/8, T 1/4
To exit Slow Motion
3.
go into PAUSE mode.
will enter SLOW mode.
player
Use the .
t
>
or
now
or
t 1/2
or
T 1/2
required speed:
(backward), or
(forward).
mode, press PLAY.
Slow motion
playback
in
reverse
is not
with
possible
Repeat Chapter/Title/Off
chapter.
Chapter: repeats
the current
?
Title:
current title.
?
Off
repeats the
does not
:
?
Track
?
All
?
Off
-
play repeatedly.
Repeat
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
play repeatedly.
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 24).
?
Note:
-
?
Video CDs
(X) during playback.
will
title/chapter/all/track on a disc.
during playback to select a desired
DVD Video Discs
mode, press PLAY.
Press PAUSE/STEP
a
repeat mode.
Slow Motion
1.
play
can
Press REPEAT
If you press > once during Repeat
back, the repeat playback cancels.
Chapter (Track) play-
3D Surround
Video CDs and DivX Discs.
To
Random
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
Press RANDOM
2.
again
on
the TV
a
or
Use 3
during Random playback,
title (track) and resumes
to
use
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
the
1.
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
playing
effect, select "Normal".
at any chosen time
on
Press DISPLAY
box shows the
page
2.
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
A-B
3.
repeat
1.
Press A-B at your chosen
appears briefly on the TV
a
during playback.
4 to select the sound
To turn off the 3D Surround
To start
menu
or
Time Search
To
3.
2.
>
24).
2.
Press DISPLAY
The sound
playback.
Video CD with
Repeat
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
1.
to normal.
Note:
setup
audio
3.
.
the unit selects another
On
3D surround effect that simulates multi-
screen.
Tip:
By pressing
Random
a
the five+
Press RANDOM
1.
produce
channel audio from two stereo
sequence.
starting point.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
the
required
start time in
"
A
*
end
"
4.
point.
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
screen.
Press A-B
Press A-B
Input
seconds from left to
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
to cancel.
31
Zoom
Use
to
zoom
the video
enlarge
Press ZOOM
1.
image.
during playback
or
still
playback
to
1600% size
→
screen
fit mode
→
the
can
when
Input
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Use the bBvVbuttons to
zoomed
To
4.
1.
Normal, Enhanced,
move
through
Press TITLE. If the current title has
normal
repeatedly
or
playback,
appears
menu
may appear.
press ZOOM
?
Press DISC MENU and the disc
Press DISC MENU
disc, VR disc and movie file.
Marker Search
To enter
Camera
Marker
a
desired
point
the TV
screen
on
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
To Recall
or
1.
During
disc
search
menu
3.
and
Clear
a
Marked Scene
press SEARCH. The marker
appears on the screen.
seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
marked
scene.
playback
a
is
menu
displayed.
to exit.
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
playback,
Within 10
again
Angle
If the disc contains
markers.
2.
angles,
as camera
options,
camera
playback from up to nine memorized
To enter a marker, press MARKER at the
start
can
points.
subtitle
Disc Menu
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
You
menu, the
Press TITLE to exit.
3.
CLEAR button.
a
Otherwise, the disc
screen.
offers features such
menu
spoken language and
chapters for the title.
Notes:
?
on
the
menu
The
2.
the
picture.
resume
corresponding number or use the b
highlight your selection. Then press
ENTER.
and Maximum.
3.
the
B v V buttons to
Title Menu
the way the
change
screen
the contents of DVD discs: Menus
100% size
Screen fit mode:
You
Checking
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
DVD Features
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Special
marker
starts from the
Or, press CLEAR and the marker
the Audio
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
a
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
number is erased from the list.
4.
You
on
any marker by
the marker search menu.
can
play
inputting
its number
Subtitles
Press S-TITLE
repeatedly during playback
languages.
to
the
see
different subtitle
Note:
?
The subtitle file of the DivX file is
smi,
?
If there is
no
information
not read in the DivX
32
displayed only
srt and sub.
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
Playing
Audio CD
an
or
MP3/WMA
Disc
MP3 / WMA disc
limited
?
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
as
with this
compatibility
player
is
follows:
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
screen. Press v / V to select a track then press
TV
PLAY
or
ENTER and
?
?
starts.
playback
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
Track2
Track3
?
Track4
File
an
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
should have
incorporate
system.
a
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 648.
MP3 / WMA
1.
Press v / V to select
to
2.
see
folder, and press ENTER
a
the folder contents.
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
Operation
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
Tip:
?
If you
is
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
in order to download MP3 / WMA files
always
be
sought
from the
copyright
owner.
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
?
move
to the next page.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
on
When
a
playing
titles, you
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
by pressing
as
track
DISPLAY.
33
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
screen.
Press PAUSE/STEP
1.
playback, press PLAY,
PAUSE/STEP again.
press
2.
during playback.
To return to
2.
Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
ENTER
To return to normal
repeatedly
or
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
Tip:
Moving
or
the next track
>
briefly during playback to go to
beginning of the
to return to the
or
current track.
Press . twice
2.
previous
In
3.
>
during
another track and
Press .
1.
By pressing
to another Track
case
briefly
step back
to the
of audio
CD,
directly to any track,
using the numbered but-
to go
playback, the
playback.
unit selects
random
A-B
1.
To
2.
Press A-B
track.
enter the track number
tons
to
Repeat
random
resumes
repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
(0-9).
repeatedly.
Track/All/Off
Repeat
You
1.
3.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired
repeat mode.
To
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
repeat playback
once
Track
a
3D surround effect that simulates
speakers (instead
speakers normally required for
multi-channel audio from a home theater system).
of the five+
play repeatedly.
during Repeat
produce
multi-channel audio from two stereo
Note:
If you press >
3D Surround
playback,
the
1.
cancels.
2.
Press AUDIO
on
To return to normal
playback, press AUDIO
disappears from
repeatedly
Search
1.
Press and hold .
or
> for about two seconds
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
to select
the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
screen.
3.
34
To exit SEARCH
mode, press PLAY.
on
the
menu
the
until "3D SUR."
menu screen.
during playback.
during playback.
"3D SUR." appears
menu screen.
the
Repeat Programmed
Programmed Playback
1.
program
1.
can
Insert
a
memory. A
2.
contain 30 tracks.
disc.
Audio CD
Press REPEAT to select
?
Track:
?
All:
?
Off(No display):
MUSIC
or
menu
If you press >
repeat playback cancels.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Erasing
Note:
Press PROGRAM
then the
again,
Program
to exit the
mark will
E
1.
Edit mode.
AUDIO CD
2.
MUSIC
1/12
0:00:00
repeat
desired
repeat mode.
play repeatedly.
Track from
Video CD
:
playback,
the
List
Program
Press PROGRAM in the
Program
Press B to
Track
during Repeat
stop mode
to
Edit mode.
move
to the
"Program"
list.
E
Program
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
3.
2-Music2
Track5
once
1/12
List
E
Program
a
enter
Track1
Use v/V to select the track that you wish to
"Program" list.
erase
from the
4-Music4
Track6
5-Music5
Track7
4.
6-Music6
Clear All
Track8
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM Edit
Info
MP3/WMA Menu
Video CD: Press PROGRAM while
The program
PROGRAM to exit the
stopped.
playback
1.
is
2.
Note:
On
a
setup
Video CD with
menu
"PBC"
on
to
PBC, you
the
use
must set PBC to Off
erase
additional tracks
as
Complete Program
steps
1-2 of
"Erasing
a
Operation
List
Track from
Program
above.
complete Program
All", then press ENTER.
for the disc will be erased.
on
Note:
programmed playback
The programs
removed.
24).
page
to
Use 3/4 to select "Clear
The
the
the
Follow
List"
menu.
Repeat
the list.
Erasing
appears. Press
menu
Press CLEAR.
on
PROGRAM Edit
(See
disc. The
Note:
appears.
E
List
a
does not
The
0:52:07
a
repeats the current track
repeats all the tracks on programmed list.
Press PROGRAM.
disappear
playing
MP3/WMA Discs:
or
AUDIO CD
2.
player
Press REPEAT when
icon appears.
The program function enables you to store your
favorite tracks from any disc in the
Tracks
are
also cleared when the disc is
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
list have
"Program"
6.
To
resume
playback,
normal
select
a
played
once.
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press PLAY.
35
Viewing
Using
JPEG Disc
a
this DVD
Player
you
can
Moving
view discs with JPEG
1.
Press .
or
>
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
during viewing a picture
to the previous file.
once
advance to the next file
files.
JPEG
to another File
to
or
JPEG
Zoom
screen.
Use
(see
PHOTO
List
the
to
enlarge
page)
zoom
33
photo image.
Preview
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
during showing
clockwise
or
a
to rotate the
picture
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
1.
move
or
PLAY.
to
move
files while
on
listening
the
same
containing
to MP3/WMA
disc.
the two
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
Playback
STOP is
to the next page.
display
PHOTO
photo
starts. The
a
menu.
file.
icon then press ENTER.
will continue until
playback
pressed.
Tip:
JPEG
Use vVbBto
display
Insert the disc
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Press DISC MENU to
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
press ENTER.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
three Slide
and
Speed options
(Slow).
(Fast),
: >>>
>>
On
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
?
>
Press
on
RETURN,
top of the
menu
is
JPEG disc
limited
?
compatibility
with this
player
is
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
highlighted.
to read the disc's contents. If you don't
screen
information of file is hidden.
display
after several
minutes,
see an on-
some
of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
slide show.
?
go into PAUSE mode.
To return to the slide
PAUSE/STEP
during
again.
show, press PLAY
or
pixels
and burn another disc.
The total number of files and folders
press
?
?
the disc
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
?
If the files have
rename
?
File
them
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
36
on
should be less than 648.
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
how far the sound has to travel to reach your set lisThis allows the sound from each speaker
Press b / B to
1.
Press SETUP. The
2.
Use v / V to select the AUDIO
3.
setup
menu
speaker.
[0.3(1)m(ft)
appears.
option
Use v / V to select the
press B to
move
then
to the third level. "Select" is
6.0(20)m(ft)]
Press b / B to test the
Front Left
Speaker Setup
menu
→
appears.
signals
of each
the volume to match the volume of test
rized in the
Press ENTER and 5.1
time.
Test
Speaker Setup option
highlighted.
4.
-
adjust
same
the Distance of the selected
then press
to the second level.
move
to your DVD/VCR Combi
tening point.
to reach the listener at the
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
speaker. Adjust
signals memo-
system.
(L)
Rear Left
→
(R)
Center
→
Front Right (R)
SubWoofer.
Right (L)
→
Rear
→
AUDIO
Speaker
Size
Volume
Distance
Test
Operation
Front L
Small
dB
0
m(ft)
0.6(2)
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
Press RETURN to return to the
Speaker
Select
Enter
speaker.
v / V / b / B buttons.
menu screen.
selection
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you
cannot
the
Volume
Press b / B to
speaker. (-6dB
adjust the output
6dB)
level of the selected
~
37
Maintenance and Service
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
using
using
the DVD-Video format that have been finalized
a
?
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
menu
appears
disc and close the
on
the TV
tray. The TITLE LIST
When
shipping
Please
save
Do not
ENTER and
playback
Press TITLE to
move
track then press PLAY
or
starts.
to the list
menu.
use
near
packing
volatile
liquids
such
as
insecticide
the unit.
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
the unit
Cleaning
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
surfaces
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
Do not
or
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
player.
?
carton and
Do not leave rubber
?
a
original shipping
the exterior surfaces clean
spray
Press v / V to select
the
the unit
factory.
Keeping
?
?
before
the Unit
Handling
at the
3.
chapter
service technician.
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
screen.
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
a
copy protection system (with scramble system)
the recording of 'copy once' broadcast
only allowing
programs. CPRM stands for Content Protection for
Recordable Media.
This
play is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
38
If the
or
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Player
you
can
play
a
appears
disc and close the
on
the TV
player
is limited
DivX disc.
?
Insert
1.
with this
compatibility
follows:
tray. The MOVIE
menu
Available resolution size of the DivX file is under
720x576
screen.
?
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
MOVIE
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
impossible
code to express in the DivX
as
mark on the
"
file, it may be displayed
Movie Folder 4
Movie Folder 5
"
_
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons
on
the remote to
normally.
?
and
highlight
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
Tip:
Press DISC MENU to
?
On
a
CD with
switch
move
*
GMC?
highlighted.
encoders, like DivX
There
are
called
1-point, 2-point,
or
or
Operation
Xvid, have this option.
different levels of GMC
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you
can
MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is
audio is
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
MPEG4
?
or
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Press STOP to exit.
4.
interleaved, either video
outputted.
press ENTER.
3.
If the video and audio structure of recorded
file is not
Playable
DivX file
z ".avi ", ".mpg ", ".mpeg
Playable
Codec format
z "DIVX3.xx ", "DIVX4.xx
"MP43 ", "3IVX ".
Playable
"
", "DIVX5.xx ", "XVID ",
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
-
-
?
-
-
39
Additional Features-VCR
On Screen
You may
part
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking
place
these On Screen
onto the
Displays
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error
messages will appear on the TV screen.
1.
will not be recorded
Press i.
Press 1
tape.
or
2 to select Dr.
Press OK.
Press CLK/CNT to
1.
Press CLK/CNT
display.
repeatedly
to
VIDEO DOCTOR
the
cycle through
HEAD STATUS
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
P
SET
R
REC
After 3 seconds the
Displays
majority of the
leaving only the
will clear
counter and the amount of
Press CLK/CNT
the TV
again
to
clock
tape left
remove
ON
OFF
On Screen
all
on
or
the
tape
screen.
displays
2.
Pr-12
ACMS
NIC
fOSD
2.
(Self-Diagnosis)
OK
OPR
Press 3
or
4 to check a
problem.
HEAD STATUS
from
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
The
O
Insert
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
1.
the
can
be
Shows the number of timer
2.
or
recording.
will display the
Press STOP when
playback
or
3.
actual
recording
play
time
is
complete.
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
40
PR-01 26 10:00~11:00SP
Shows the current status of timer
start
tape counter
hours, minutes and seconds.
The
recording.
NEXT TIMER PROGRAMME
O
Press CLEAR to set the counter to 0:00:00.
in
tape with its protection tab in place
NO. OF TIMER PROGRAMME
Press CLK/CNT.
The
a
O2
tape.
Press PLAY
NOT RECORDABLE:
Press i
recording.
Hi-Fi Stereo Sound
System
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
play-
stereo
stereo sound decoder. This allows you
digital
to record and
a
playback
the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
system, video disc
or
another DVD/VCR Combi
receiver.
1.
Your DVD/VCR Combi receiver's NICAM
digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual
and
played
or
the TV
on
sound. The
mono
sound received
particular type of
briefly discouple of seconds:
that recorded will be
screen
for
a
STEREO NICAM
Sound is
automatically
stereo and
mono
recorded
the Hi-Fi
on
tracks of the video
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
on
primary language
the
on
the Hi-Fi
channel
(left)
track of the video
mono
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
on
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
3.
The choice is
STEREO, LEFT, RIGHT and
MONO. In BIL NICAM
playback
the
primary
lan-
guage is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The
primary language
willbe
output from both
channels when the audio
Please note that when
setting is MONO.
adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
41
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the
If you load
scene is
player.
memorized, the
a
disc that has the
scene
recalled.
automatically
Note:
This
player
does not memorize the
switch off the
player
before
scene
commencing
of
to
a
disc if you
the disc.
play
Screen Saver
The
appears when you leave the DVD
mode for about five minutes.
screen saver
player
in
Stop
Video Mode
Setting
With certain
discs, the playback picture may be
flickering
Dot Crawl is shown
That
or
means
Vertical
straight
on
interpolation
or
lines.
De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video
mode, press and hold
DISPLAY about 3 seconds
new
during
disc
playback.
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
The
video mode number selected is
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
If you turn off the power, the video mode will return
to initial default state
Detailed
MODE1
al
or
:
MODE2
:
Description
The
video
(MODE1).
source
material)
of each Video Mode
material of the DVD video
(film
materi-
is determined from disc information.
Suitable for
playing film based content or video
by the progressive scan method.
based material recorded
MODE3
:
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
42
setting only
works when the
Scan mode is set to "On"
on
the
setup
from DVD To VCR
Copying
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
"Progressive
protected,
2.
3.
on
the
menu.
If the DVD you
1.
Scan" to "Off"
to copy is copy
you may not be able to copy the disc.
are
attempting
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
videotape
the DVD to VHS Tape
Press the REC/ITR button.
With this video recorder you can make recordings
from an external source, such as copying from another
video recorder
camcorder.
In the
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
1.
as
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR
panel
IN
AV1)/VIDEO (VCR
Insert the recorded
3.
rear
a
blank
appears, you may need
button manually to begin
displayed. (VCR B)
menu
Play
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
AV 1 for
AV1)/
recording from AUDIO L/R (VCR IN
(VCR IN AV1) terminals on the
VIDEO
4.
To start
on
on
rear
(L(MONO)/R)/
the front of your unit.
press the REC/ITR
VCR A.
recording,
and PLAY
on
VCR B
Process
When the DVD is finished
playing,
press STOP to
end the copy.
You must
the
Press AV until the socket you wish to record from
is
of your unit.
AV 2 for recording from AUDIO IN
Copy
on
tape into VCR A and
VIDEO IN terminals
the
AV1)
tape into VCR B.
Note:
Stop
IN
of your unit or AUDIO IN (L(MONO)/R) /
VIDEO IN on the front panel of your unit.
copying.
4.
or a
Note
2.
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
to press the
recorder
into the VCR deck.
Copy
If the DVD disc
from another video
Recording
5.
When you want to finish
on both video recorders.
copying,
press the STOP
stop the Copy process manually
ends, or the unit may
when the DVD movie
replay
and record
over
and
over
again.
43
Presetting
You
make
sure
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the
memory first
volume.
1.
(see "Presetting
radio stations"
on
the
left).
Press FM/AM
the remote control
on
front
on
to the Radio
Listening
50 stations for FM and AM. Before
preset
can
tuning,
the Radio Stations
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
the remote control
on
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press 3/4
on
the remote control
repeatedly
to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
RADIO
AM
receiver tunes in
01
522kHZ
3.
OK, CLEAR
,
one
preset station
at
a
time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
To Clear the Stored Radio
Stations
RADIO
FM
06
108. 00MHZ
1.
OK, CLEAR
,
Press FM/AM
on
2.
3.
panel until the frequency
the display and TV screen.
or on
the
band appears
Press 3/4 on the remote control to select your
desired radio channel.
Press FM/AM
front
4.
the remote control
on
front
panel
on
the remote control
Hold down PRESET
(+/-)
hold down 1 and 2
on
1
or
2
or on
the
to select the desired band.
seconds, and
a
on
the front
panel
or
RADIO
the remote control for
station is searched for
FM
06
108. 00MHZ
,
OK, CLEAR
automatically.
2.
Press 3/4
on
the remote control to select your
desired station.
RADIO
FM
06
87. 50MHZ
,
OK, CLEAR
RADIO
AM
5.
Press MEMORY
on
the remote control.
,
3.
10
522kHZ
OK, CLEAR
Press CLEAR the remote control to clear the
stored radio station.
6.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
While record
or
record pause
function may not be
44
operated.
mode, the CLEAR
Tuning
1.
into
a
Press FM/AM
Station
on
Manually
the remote control
front
on
2.
panel until the frequency
the display and TV screen.
Press FM/AM
front
3.
panel
on
or on
the
band appears
the remote control
or on
the
to select the desired band.
Press PRESET
1 and 2
on
(+/-) on the front panel or press
the remote control to tune in the
desired station.
Tuning
into
a
Station
Hold down PRESET
down 1 and 2
seconds, and
a
on
(+/-)
on
Automatically
the front
panel
the remote control for 1
station is searched for
hold
or
or
2
automatically.
Note
The search may not
weak signal.
stop
at
a
station with
a
very
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
the
appear in
telephone,
the display.
example,
to
MUTING and MUTE indicator
45
Reference
Language Codes
Use this list to
Disc
your desired
language
for the
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
Czech
46
input
Audio, Disc Subtitle, Disc Menu.
Republic
UG
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD/VCR Combi
No disc is inserted.
Insert
No
disc
the power cord into the wall outlet
Plug
securely.
tape is inserted.
The TV is not set to receive DVD/VCR
Combi receiver signal output.
picture.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
receiver does not work.
No
service.
contacting
Select the
on the TV
lit.)
appropriate video input
the picture from the
mode
so
DVD/VCR Combi receiver appears
the TV screen.
on
TV/VCR mode for DVD/VCR Combi
Press the TV/VCR button
receiver is set to TV.
control repeatedly to choose VCR mode.
TV indicator disappears in the display
the remote
on
window.
The video cable is not connected
Connect the video cable
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the audio
equipment
cable is not set to receive DVD/VCR
Combi receiver
signal output.
The audio cables
are
not connected
on
the TV.
input
mode
on
the audio
receiver so you can listen to the sound from
the DVD/VCR Combi receiver.
Connect the audio cables
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
The
digital audio output
position.
is set to the
wrong
The
playback picture
is
poor.
The disc is
Tape
heads
is a rental
another VCR.
The DVD/VCR Combi
receiver does not start
playback.
the
digital audio output to the
position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.
Clean video heads.
or was
recorded
on
Use v/V for manual
while
adjustment
Insert
No
disc
tape is inserted.
Insert
disc is inserted.
tracking
tape is playing.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
unplayable
connected with
Set the
No disc is inserted.
An
equipment
Clean the disc.
dirty.
Tape
on
the audio cables.
correct
dirty.
are
Turn
a
lit.)
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
rating
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from
This should mean that additional head cleaning should not
However dirt accumulating on the head after a long period
blurred or broken up. High quality video cassette tapes will
or
the disc
side down.
tray correctly
guide.
The disc is
Rating
on
playback
Rating
function
or
change
the
level.
your VCR the video head is automatically cleaned.
be necessary.
of time can cause the playback picture to become
not normally deposit dirt onto the video head, but old
damaged tapes might.
47
Cause
Symptom
This remote control
The remote control is not
the same
buttons for VCR and
remote
uses
sensor
Correction
pointed
at the
Point the remote control at the remote
of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD functions
There is
an
obstacle in the
path
the remote control within 23 ft
Operate
(7 m).
DVD/VCR Combi receiver.
(ex. PLAY).
of the DVD/VCR Combi receiver.
sensor
of the remote
Remove the obstacle.
control and the DVD/VCR Combi receiver.
The batteries in the remote control
the batteries with
Replace
are
new ones.
exhausted.
This remote control
The
tape does
not
the
uses
When
same
using
a
VCR, first press the VCR
a DVD, first press
buttons for VCR and DVD functions
button. When
(ex. PLAY).
the CD/DVD button.
using
The DVD/VCR Combi receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
or
tape will
run
not rewind
fast-forward.
The
tape is already fully rewound
playback picture
resume
or
fast-
Check the
the RF cable for
con-
Set the TV to the Video channel
tape.
If
you're using only
nection.
(see
Noise appears
visual search.
This is normal.
Turn camcorder
during
p.
16).
on
and
operate
properly.
Noise appears during
normal playback.
The automatic
Breaks
There is
The automatic
noticeable
in Hi-Fi soundtrack.
Recording
to
forwarded.
does not appear while
the tape is running.
are
(X)
no
tracking
tracking
cannot be
The
engaged.
engaged.
Try
manual
tracking (see
p.
26).
tape loaded
Try
manual
tracking (see
p.
26).
mode is
tape loaded,
has had its record
started.
mode is
safety
or
the
tab removed.
has
(another VCR, camcorder)
properly connected.
source
not been
Insert
a
cover
the hole where the tab
tape,
or
using
adhesive
tape,
was
removed.
Tape-to-tape editing
not possible.
Timer
recording
is
won't
The clock/or the timer have been set
Confirm that the camcorder is
incorrectly.
connected.
The timer is not
work.
Re-perform
tings.
engaged.
properly
the clock and/or timer set-
Press POWER and confirm that the
The loaded
tape has had its record safety
timer indicator is
displayed
on
tab removed.
DVD/VCR Combi receiver's
Insert
a
Audio mode is not set
insert
a
properly.
the
Display.
pate with adhesive tape, or
tape with the record safety tab
intact.
Select "STEREO"
No Hi-Fi sound.
ing
AUDIO
on
by repeatedly pressthe remote control.
Moisture Condensation
Moisture condensation
?
When the DVD/VCR Combi receiver is moved from
a
?
can occur:
cold
Under
place
to
a warm
extremely
In locations where moisture condensation may
?
into
the DVD/VCR Combi receiver
?
an
When condensation has
occurred, wait
for the DVD/VCR Combi receiver to
it.
48
plugged
AC power outlet with POWER On.
This will help prevent condensation.
place.
humid conditions.
Keep
occur:
dry
a
few hours
before
using
Specification
General
Power
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Refer to main label
Power
Refer to main label
Timer
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
Operating humidity
5%to90%
DVD Section
Laser
Semiconductor
Signal system
Frequency response
PAL/NTSC
laser, wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 70 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
(analog
out connectors
only)
(DVD, CD)
Outputs
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin
(C) 0.3 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
VCR Section
Head
6 heads helical
system
system
Television
Recording
scan
PAL/SECAM colour
format
azimuth
system
system
PAL/MESECAM
RF OUT
G
RF Modulator
UHF 22
Tape speed
23.39 mm/s (SP), 16.69 mm/s (LP)
(Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
68
-
(Adjustable)
PAL/MESECAM;
NTSC
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
ratio
AUDIO: -6.0
dBm,
VIDEO: 1.0
V(p-p),
more
75
than 47 kohms
ohms, unbalanced
VIDEO: More than 43 dB
AUDIO: More than 72 dB
More than 42 dB
Dynamic
range
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
45W+45W(6ohmat1kHz,THD10%)
Front: 45W + 45W (THD 10%)
Centre: 45W
Surround: 45W
+
Subwoofer: 75W
45W
(8
(6
ohm at 1
ohm at 30
kHz, THD 10%)
Hz, THD 10%)
49
Speaker
Section
Satellite (LHS-36SES)
Type
Impedance
Frequency Response
1
1
Way
Speaker
6Ω
140
20,000 Hz
-
Sound Pressure Level
85 dB/W
Rated
45W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
90W
H
x
x
105x99x83mm
D)
0.45
Passive Subwoofer (LHS-36SEW)
Type
Impedance
Frequency Response
1
kg
Way
1
Speaker
8Ω
65-1500Hz
Sound Pressure Level
87 dB/W
Rated
75W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
Design
and
(1m)
(1m)
150W
x
H
x
175x351x270mm
D)
3.4
specifications
are
Manufactured under license from
subject
Dolby
to
kg
change
Laboratories.
without notice.
"Dolby",
"Pro
Logic"
Laboratories.
"DTS" and "DTS
50
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
and the double-D
symbol
are
trademarks of
Dolby
P/N: 3834RH0124T
Download PDF

advertising