LG | LH-T6740A | LG LH-T6740A Owner’s Manual

LH-T6740A JA2ALLS
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T6740
(Main Unit: LH-T6740A,
Speakers: LHS-T6740T, LHS-T6740C,
LHS-T6740W)
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
This
an
shock to persons.
The exclamation mark within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the instructions
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in
such as a book case or similar unit.
a
confined space
OTES ON COPYRIGHTS:
CAUTION:
This DVD/CD receiver
employs
a
Laser
It is forbidden
System.
To
ensure proper use of this product, please read this
owner's manual carefully and retain it for future reference.
Should the unit require maintenance, contact
(see service procedure).
an
authorized
service location
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous
other than those
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
on
the apparatus.
by law to copy, broadcast, show, broadcast
play in public, or rent copyrighted material without
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures of
these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
via cable,
SERIAL NUMBER: The serial number is located
of this unit. This number is
unique
available to others. You should record
here and retain this
guide
as a
on
the back
to this unit and not
requested information
permanent record of your
purchase.
Model No.
Serial No.
2
___________________________________
___________________________________
Contents
Introduction.....................4-9
SymbolusedinthisManual...............4
AbouttheSymbolDisplay.............4
PLAYBACK.............................23
SLOWSCAN...........................23
REPEATA-B...........................23
NotesonDiscs.........................4
REPEAT...............................23
HANDLINGDISCS.......................4
3DSURROUND.......................23
STORINGDISCS.........................4
TIMESEARCH..........................23
CLEANINGDISCS........................4
ZOOM..............................24
TypesofPlayableDiscs..................5
Regionalcode.........................5
MARKERSEARCH....................24
Disc-relatedterms......................6
FrontPanel............................7
DisplayWindow.........................7
RemoteControl.........................8
REMOTE CONTROL OPERATION RANGE
.
.
.
.
REMOTE CONTROL BATTERY INSTALLATION
PAUSE................................24
SpecialDVDFeatures..................24
CHECKING THE CONTENTS OF DVD
DISCS:MENUS.........................24
TITLEMENU..........................24
.8
DISCMENU...........................24
.8
CAMERAANGLE.......................24
RearPanel............................9
CHANGINGTHEAUDIOLANGUAGE.
.
.
.
.
.
.
.
.24
SUBTITLES...........................24
InstallationandSetup.
.
.
.
.
.
.
.
.
.10-21
.
TVConnections.......................10
.11
Audio Connection to Optional Equipment
AerialConnections.....................12
Assembling and Connecting to the Speakers .13
.
.
DVDAudioDiscs.......................25
MOVINGTOANOTHERGROUP.
.
.
.
.
.
.
.
.
.
.
.25
VIEWINGANOTHERPAGE................25
.
SpeakerSystemConnection..............14
SpeakerPositioning....................15
Mini Glossary for Audio Stream &
Playing an Audio CD or MP3/WMA Disc
Audio CD and MP3 / WMA Disc Features
.
.
.
.
.
.
.
.26
.27
PAUSE................................27
MOVINGTOANOTHERTRACK............27
REPEATTRACK/ALL/OFF.................27
SurroundMode........................16
SoundMode..........................16
SEARCH.............................27
On-ScreenDisplay.....................17
3DSURROUND.........................27
PLAYBACK STATUS/RESTRICTIONS
.
.
.
.
.
.
.
.17
InitialSettings......................18-21
REPEATA-B...........................27
ProgrammedPlayback.................28
REPEATPROGRAMMEDTRACKS
.
.
.
.
.
.
GENERALOPERATION...................18
ERASING A TRACK FROM PROGRAM LIST
LANGUAGE............................18
ERASING THE COMPLETE PROGRAM LIST
?MenuLanguage......................18
?DiscAudio/Subtitle/Menu.............18
DISPLAY...............................18
?TVAspect..........................18
?DisplayMode........................18
?ProgressiveScan......................18
AUDIO................................19
?5.1SpeakerSetup.....................19
.19
?DynamicRangeControl(DRC)
.
.
.
.
.
.
.
.
.
?Vocal..............................19
LOCK(ParentalControl)..................20
?Rating.............................20
?Password(SecurityCode)...............20
?CountryCode........................20
OTHERS..............................21
?PBC...............................21
?AutoPlay...........................21
?DivX(R)VOD.........................21
PlayingaDVDorVideoCD
.
.
.
.
.
.
.
.
.
.
.22-24
PLAYBACKSETUP....................22
GeneralFeatures......................22
MOVING TO ANOTHER TITLE/GROUP
.
.
.
MOVING TO ANOTHER CHAPTER/TRACK
.
.
.
.
.
.
.22
STILL PICTURE AND FRAME-BY-FRAME
.
.
.
.
.
.
.
.
.
.28
.28
.28
SLIDESHOW..........................29
STILLPICTURE.........................29
MOVINGTOANOTHERFILE..............29
ZOOM.................................29
TOROTATEPICTURE....................29
TO LISTEN TO MP3/WMA MUSIC
WATCHINGPICTURE....................29
PlayingaDVDVRformatDisc
.
.
.
.
.
.
.
.
.
.
.
.30
MaintenanceandService................30
HANDLINGTHEUNIT....................30
PlayingaDivXMovieDisc...............31
AdditionalFeatures.....................32
LASTSCENEMEMORY...................32
VIDEOMODESETTING...................32
SYSTEMSELECT.......................32
5.1SpeakerSetup.....................33
SPEAKERSETUP.......................33
.34
PresettingtheRadioStations
ListeningtotheRadio...................34
SleepTimerSetting.....................35
.
.
.
.
.
.
.
.
.
.
.
Dimmer..............................35
Mute................................35
UsingHeadphoneJack..................35
SelectingInputSource...................35
.22
SEARCH...............................22
CHANGINGTHEAUDIOCHANNEL
.
.
ViewingaJPEGDisc...................29
.
Operation.....................22-35
.
Reference....................36-39
.22
LanguageCodes.......................36
CountryCodes........................36
Troubleshooting.....................37-38
Specifications.........................39
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
About the
ensure
reference.
"
Symbol Display
"
may appear on your TV display during
operation and indicates that the function explained in
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD video disc.
and maintenance of your DVD/CD receiver. Should
require service, contact an authorized service
the unit
location.
Notes
Symbol
Used in this Manual
The
lightning
symbol alerts you to the
presence of dangerous voltage within the
enclosure that may constitute
a
Discs
HANDLING DISCS
flash
product
on
risk of
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
STORING DISCS
After
Indicates
playing,
store the disc in its case. Do not expose
the disc to direct
Note:
special
notes and
operating
features.
leave it in
a
sunlight or sources of heat and never
parked car exposed to direct sunlight.
CLEANING DISCS
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
of the
following symbols
represented by the
one
to the disc
the task easier.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
4
making
DivX Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
vinyl
records.
Types
of
Playable
Discs
DVD
(8cm/12cmdisc)
DVD audio discs
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
Regional
code
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
This DVD/CD receiver is
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
encoded DVD software. This unit
Notes:
Notes
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
manufactured for
play only
?
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
DVD discs labeled "4"
4
can
or
"ALL".
Regional Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
with
on
the
one or more
cover.
This
number must match your DVD/CD receiver's
regional code or the disc cannot play.
?
?
on
designed and
playback of region "4"
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Do not
use
shaped
or
malfunctions.
DVDs and Video CDs
Notes
on
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
designed by the software
playback features may
some
not be available or other functions may be added.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide patents issued and pending. "DTS" and
"DTS Digital Surround" are registered trademarks of
Digital
Digital
Theater
Theater
Systems,
Systems,
Inc.
Copyright 1996, 2003
rights reserved.
Inc. All
5
Disc-related terms
PBC:
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
as
sided recordable
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
Title
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
A title is
VCD
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
stereo sound.
quality
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Chapter (DVD video discs only)
chapter is a segment of a title such
A
film
or one
a
popular compression format used for digital
yields very high near-CD quality.
audio files that
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
Group (DVD
audio discs
The main audio content
or
only)
accompanying
feature
album.Each group is assigned a group reference
number enabling you to locate it easily.
Scene
JPEG
On
Expert Group. JPEG is a compressed
that allows you to save images with no limit
Joint Pictures
file format
the number of colors.
DivX
DivX is the
of
name
which is based
on
a
the
revolutionary
new
MPEG-4
standard for video.You will be able
movies
a
content or additional feature content, or music
WMA
on
interview in
may not be recorded.
MP3
MP3 is
be title 2, and cast interviews could be title 3. Each
assigned a reference number enabling you to
locate it easily.
title is
using
new
video codec
compression
to play DivX
this DVD/CD receiver.
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
moving pictures
and still
Track
A distinct element of audiovisual information, such
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video
of audio.
6
(with multiple angles)
and several tracks
Front Panel
STANDBY/ON
PHONES connector
STANDBY indicator
Lights red when the
Standby mode (off).
DISC
VOLUME controller
receiver is in
DISPLAY Window
Tray
Introducin
FUNCTION/PLAY
Remote
Press and hold down this button
sensor
about 3 seconds, then press
repeatedly to select other function.
MONO/STEREO/
PAUSE/STEP
MEMORY/STOP
OPEN/CLOSE
TUNING
AV2 AUDIO
Display
(-/+)/SKIP/SCAN
Input (L/R)/VIDEO Input
Window
Indicates current
SLEEP
surround mode
indicator
Indicates current
Programmed
playback active
MUTE indicator
audio stream
TUNED indicator
Indicates current
STEREO
player function:
Playback, Pause,
indicator
etc.
Repeat playback
mode indicators
DIGITAL
PL II
PCM
SVCD
SLEEP
MUTE
REPEAT
TITLE
CHP/TRK
ALL
AB PROGRAM
TUNED ST.
DVD
CD
MP3
VCD
ANGLE active
Speaker
Indicates current
indicators
chapter
disc type
or
track
number
Indicates current
Indicates current
title number
Total
playing time/Elapsed time/
Frequency/Sleep time/Surround
mode/Volume etc. indicators
7
Remote Control
POWER
OPEN/CLOSE
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
on
NUMBER
the front
SLEEP
panel.
(p. 35)
SUBTITLE
PRO LOGIC II
(p. 24)
(p. 16)
AUDIO
(p. 24)
(p. 16)
SETUP (p. 18)
RETURN
(p. 22, 29)
DISPLAY
(p. 17)
SOUND
ENTER
ARROW
For
use
selection
in
highlighting
on a
GUI
a
TITLE
(p. 24)
Use the TITLE button to
menu
screen, TITLE and MENU
the title
display
on
screen.
MENU (p. 24)
Use the MENU button to
display the menu screen
included on DVD video
discs.
included
screen
DVD video discs.
SLOW SCAN
(Q
/
R)
(p. 23)
VOLUME
(+/-)
PRESET(+/-) (p. 34)
SKIP/SCAN
STOP
PAUSE/STEP
MUTE
PLAY
MARKER(p.
(p.
ANGLE (p.
ZOOM (p.
SEARCH
) (p. 22)
PROGRAM
(p. 28)
(p. 23)
REPEAT (p. 23, 27)
REPEAT A-B (p. 23, 27)
24)
24)
24)
24)
REMOTE CONTROL OPERATION RANGE
Point the remote control at the remote
sensor
(p. 35)
REMOTE CONTROL BATTERY INSTALLATION
and
Remove the
battery
cover on
the
rear
of the remote control, and insert two
(6 m)
from the front of the
R03
(size AAA) batteries
aligned correctly.
remote sensor
Angle:
/
CLEAR
DIMMER
press the buttons.
Distance: About 20 ft
(
(p. 35)
with
and
About 30° in each direction in front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Rear Panel
POWER CORD
SPEAKER Connectors
COAXIAL DIGITAL IN Connector
AV IN AUDIO
Input (L/R)/VIDEO
Introducin
IN Connectors
FM Antenna
Connector
66
4
6
6
6
OPTICAL IN Connector
S-VIDEO OUT Connector
MONITOR VIDEO OUT Connector
COMPONENT VIDEO OUT Connectors
ConnecttoaTVwithYPbPr
inputs.
AM
Loop
Antenna
Connectors
Do not touch the inner
cause
pins
permanent damage
of the
jacks
on
the
rear
panel.
Electrostatic
discharge
may
to the unit.
9
Installation and
Setup
TV Connections
Make
the
one
of the
capabilities
following connections, depending
existing equipment.
on
Progressive Scan (ColorStream
of your
If your television is
Depending
on
your TV and other
equipment
you wish
video resolution
to connect, there are various ways you could connect
the DVD/CD Receiver. Use
one
of the connections
Please refer to the manuals of your TV, VCR, Stereo
or other devices as necessary to make the
System
best connections.
sure
the DVD/CD Receiver is connected
to the TV. Select the correct AV
directly
?
input
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
on
protection system.
Connect the S-VIDEO OUT
Receiver to the S-VIDEO IN
S-Video cable
jack on the DVD/CD
jack on the TV using
the
possible.
Set the
Progressive to "On" on the setup
progressive signal, see page 18.
releasing
does not work with the
Progressive
scan
connections
(yellow VIDEO OUT jack).
Rear of TV
(S).
VIDEO
INPUT
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Video connection
Connect the MONITOR OUT
from the DVD/CD
Receiver to the VIDEO IN
the TV
video cable
jack
jack on
Video
(Color Stream )
Connect the COMPONENT VIDEO OUT
DVD/CD Receiver to the
10
an
Y
Pb
Pr
the
supplied (V).
Component
using
using
Y Pb Pr
corresponding
cable (C).
connection
jacks from the
jacks on the
in
menu
for
Set the progressive to "Off" by removing any disc from
the unit and close the disc tray. see that "no disc" is
displayed on the display window. Then press STOP
and hold it for five seconds before
?
S-Video connection
TV
"digital ready"
Notes:
?
Caution
--
connection
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/CD Receiver.
described below.
Make
or
television, you may take advantage of the DVD/CD
Receiver's progressive scan output for the highest
Tips:
--
pro)
high-definition
a
S
V
C
it.
analog
video
Audio Connection to
Optional Equipment
Connect the DVD/CD receiver to your
optional equipment
1.
Connect
a
VCR to the AV1 connectors.
2.
Connect
a
additional VCR to the AV2 connectors.
3.
Connect
an
optical output
4.
Connect
an
coaxial output of DVD/CD receiver
of DVD/CD receiver
VCR
for audio output.
(or Digital
Device
(or Digital
Device
to the OPTICAL IN connector.
etc)
to the COAXIAL IN connector.
etc)
Additional VCR
OUT
IN
IN
OUT
VIDEO
AUDIO
(L)
AUDIO
(R)
To AUDIO OUT
InstaliodSeup
(L/R)/
VIDEO OUT
To AUDIO OUT
(L/R)/
VIDEO OUT
To AUDIO IN
VIDEO IN
(L/R)/
(AV1)
To AUDIO IN
VIDEO IN
(L/R)/
(AV2)
OPTICAL
OUT
DVD
Player (or Digital Device, etc)
Note:
If the audio format of the
will
produce
a
digital output
strong, distorted sound
does not match the
or no
capabilities
of your DVD/CD Receiver, the receiver
sound at all.
11
Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
Loop aerial to the AM aerial connector.
Connect the AM
Connect he FM Wire aerial to the FM aerial connector.
Notes:
To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD receiver and other components.
Be sure to fully extend the FM wire aerial.
After
12
connecting the
FM Wire
aerial, keep it
as
horizontal
as
possible.
Assembling
The front and
the front and
and
Connecting
to the
Speakers
speakers are detached from the speaker stands. Connect
speakers from speaker stands as illustrated.
rear
rear
the
speaker
How to connect the
speaker
terminals
the bottom of each front and
terminals
on
on
the
cords to the
speaker
to the stand
appropriate
cords to the
the bottom of each front and
speaker and attach the
the speaker stands.
speaker
Speakers
Connect the
speaker.
After connecting
To attach the
cords and assemble
To detach the
front and
rear
rear
appropriate
rear
speakers
to
InstaliodSeup
speaker from the stand
13
Speaker System Connection
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround sound,
cords.
adjust
the
speaker parameters (volume, distance, etc.).
Notes:
Be
sure
to match the
speaker cable
to the
appropriate terminal
on
the components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
If you
use
front
speakers
with low maximum
input rating, adjust the volume carefully
to avoid excessive
output
on
the
speakers.
About Ferrite Core
Be
sure
to attach the ferrite core to the
(for connecting
This ferrite
to this
core can
cables
reduce noises.
How to attach the ferrite
1
speaker
unit).
Press the stopper
core
[a] of the ferrite
2
Wind the Subwoofer cable
3
Close the ferrite
core
core
once on
to open.
the ferrite
core.
until it clicks.
The
Attach the ferrite
comment.).
14
length here is
short
Note:
core near
the unit
(Refer
to the
fig.3 and
as
possible.
much
as
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2 rear
speakers
and
subwoofer).
If you want to
subwoofer.
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
?
?
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
equal
same
distance. And
height.
But
by hearing position
normally place
it above
or
set up the
below the
television.
?
Rear
speakers
right
Place left and
behind the
for surround sound
playback.
position
speakers
wall
listening
These
area.
speakers
recreate sound motion and
InstaliodSeup
atmosphere required
For best results, do not install the rear speakers too far behind the listening
and install them at or above the level of the listener's ears. It is also effective to direct the rear
In the
towards
case
of
a
other, and set the
?
a
smaller
rear
or
ceiling
room
to further
disperse
size, if the audience is
speakers
above 60
-
90
cm
the sound.
near
to the rear wall set the rear
than the listener's
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
15
Mini
Glossary
for Audio Stream &
Surround Mode
Sound Mode
You
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to enjoy 5.1(or 6) discrete channels of high quality
digital audio from DTS program sources such as discs, DVD
and compact discs, etc.bearing the trademark. DTS Digital
Surround delivers up to 6 channels of transparent audio(which
means identical to the original masters) and results in
exceptional clarity throughout a true 360 degree sound field.
The term DTS is a trademark of DTS Technology, LLC.
Manufactured under license from DTS Technology, LLC.
A) By pressing SOUND
Each time you press SOUND button, the sound mode is
changed in the following order;
PRO LOGIC
TECHNO
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you can
program source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
"
Use this mode when
which carries the
playing movie
"
"
or
"
ROCK
CLASSIC
→
→
→
PLII MUSIC
POP
→
SOFT
LIVE
→
→
→
DANCE
3D SURROUND
→
→
...
Tips:
ROCK:
Reproduces the acoustics of rock music.
Reproduces the acoustics of pop music.
LIVE: Reproduces the acoustics of a 300-seat live.
DANCE: Reproduces the acoustics of dance music.
TECHNO: Reproduces the acoustics of techno
POP:
Dolby Digital 2 channel
provides the effect
music.
CLASSIC:
of
than before.
→
(This function available 2-channel mode only)
mark. This mode
being in a movie theatre or live concert house-an effect with
an intensity which can only be obtained through DOLBY PRO
LOGIC SURROUND. The effect of the front/back/left/right
movement of the sound image, as well as the sense of fixed
position in the sound image, is much clearer and more dynamic
→
PLII MOVIE
→
PLII MATRIX
BYPASS
The
button
Reproduces
the acoustics of orchestral
music.
SOFT: Ideal for soft acoustic sounds.
B) By pressing
PL II button
Each time you press
PL II button, the sound mode
changed in the following order;
is
(II)
Dolby Pro Logic
PRO LOGIC
II creates five full-bandwidth
output channels
This is done using an advanced,
from two-channel sources.
high-purity matrix surround decoder that extracts the
spatial
properties of the original recording without adding any
sounds
or
new
tonal colorations.
MUSIC mode:
The Music mode is for
PLII MOVIE
BYPASS
→
PLII MUSIC
→
...
When DVD is inserted.
can
change the sound mode of
DVD
(Dolby Digital, DTS,
PRO LOGIC, etc) by pressing the AUDIO button
on
the remote
during playback.
Although the DVD contents differ from disc to disc, the
following explains the basic operation when this feature is
used.
use
with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode except that the
directional enhancement logic is turned off. It may be used to
enhance mono signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The ultimate
"cure" for poor FM stereo reception may be simply to force the
audio to mono.
Each time you press AUDIO button, the sound mode of DVD is
as the following order;
changed
→→→
For your reference
?
3D SURROUND
The DVD/CD receiver memorizes the last mode
settings
produce a 3D Surround effect, using 3D Surround
Sound technology, which simulates multi-channel audio
playback from two conventional stereo speakers instead of the
five or more speakers normally required to listen to multiThis unit
→
(This function available 2-channel mode only)
Yo u
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
→
PLII MATRIX
can
?
for each
source individually.
identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled with
the
logo.
DTS Digital Surround discs are marked with DTS.
You
can
-
-
channel audio from a home theatre. This feature works with
DVD discs encoded with Dolby Pro Logic and Dolby Digital
audio tracks.
-
BYPASS
Software with multichannel surround audio
according
16
to the way it was recorded.
signals
is
played
Note:
Sound Mode is not applicable when headphone is used.
On-Screen
You
the
use
the
Some items
screen.
To
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
Display
Example: On-Screen Display during
playing DVD Video
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
1.
Press DISPLAY
2.
Press v / V to select
during playback.
The selected item is
3.
an
Chapter
item.
highlighted.
Audio
use
and
change the setting. You can also
the number buttons if appropriate (e.g.
the title
number).
For
press ENTER to execute the
1/12
some
functions,
setting.
0:20:09
Subtitle language
?
Some discs may not
shown below.
If
provide
all of the features
button is
no
pressed for 10 seconds,
display disappears.
screen
the
on-
b/Bor
AUDIO
ABC
1 ENG
A-B
1/9
Repeat
title
Repeat
sequence
Enter
Marker
MARKER SEARCH
a
Marker Search
Angle
Action
play
ANGLE
Sound
3D SUR
prohibited
or
Track Number
(or PBC mode)
1/3
not available
b/Bor
Audio Channel
Selection Method
1/3
b /
AUDIO
Time search
0:20:09
3D SUR
Selection Method
Items
Group
b /
Number
Output
MP3
mode
Subtitle language
Sound
1
b/Bor
AUDIO
b /
ABC
ENG
3D SUR
SUBTITLE
b/B
0:20:09
language
Digital Audio
Output mode
Display only
b/Bor
AUDIO
and
Subtitle language
B, Numbers
ENTER
Time search
Audio
b/Bor
B, Numbers
ENTER
Numbers, ENTER
Track Number
Audio language
and Digital Audio
b/B
Example: On-Screen Display during
playing DVD Audio
B, Numbers
ENTER
B, Numbers
Numbers
ENTER
0:20:09
point
Example: On-Screen Display during
playing divx movie disc
Track Number
b /
ENTER
Sound
Items
b/B
Selection Method
Items
menu
from this
InstaliodSeup
b/Bor
1/3
Time search
Resume
b/Bor
SUBTITLE
Example: On-Screen Display during
playing VCD
PLAYBACK STATUS/RESTRICTIONS
Title
B, Numbers
Numbers, ENTER
language
Digital Audio
Output mode
Notes:
?
b /
ENTER
Time search
Press b / B to
inputting
Number
OFF
ABC
Display only
b/Bor
Page (or Angle)
ANGLE
or
1/3
17
Initial
DISPLAY
Settings
DISPLAY
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 21.
To
display
display
the
Progressive
Widescreen
Scan
Off
Move
TV
Display
1.
Press SETUP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
appears.
Use v / V to select the second desired
press B to move to the third level.
option
then
or
PLAY to exit the
Setup
menu.
LANGUAGE
LANGUAGE
Menu
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Display
Mode
Letterbox:
setting
DVD-A
works
only
when the TV
Displays a wide picture with
portions of the screen.
bands
Panscan:
Language
Select
a
for the
language
Setup
menu
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
To Turn ON
scan:
Connect component out of the DVD to the
input
your monitor/television, set your television
or
and
"Progressive Scan"
on
the DISPLAY
DISPLAY
on-screen
Aspect
Mode
Progressive
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Original:
Refers to the
recorded.
was
original language
Other: To select another
number
according
chapter.
reference
press CLEAR.
18
to the
If you
On
Off
track
in which the
language, press number
corresponding 4-digit
language code list in the
enter the wrong language code,
buttons then ENTER to enter the
Scan
DVD-A
Select the
of
monitor
Component Input.
1. Select
Select
progressive
Display
disc
the
Progressive Scan
TV
DVD-V
the
Automatically displays the wide picture on
and cuts off the portions that do not fit.
display.
Disc Audio / Subtitle / Menu
on
screen
then press B.
Menu
Aspect
upper and lower
to
Move
DVD-V
Mode
16:9 wide TV is connected.
a
On.
English
Language
standard 4:3 TV is connected.
a
mode is set to "4:3".
entire
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
Press SETUP
DVD-A
16:9 Wide: Select when
GENERAL OPERATION
menu
DVD-V
Aspect
4:3: Select when
To go back to the previous level:
Press b on the remote control.
Setup
Select
screen.
To go to the next level:
Press B on the remote control.
5.
Mode
A second press of
menu.
SETUP will take you back to initial
4.
16:9Wide
Aspect
Display
and exit the Menu:
Press SETUP to
3.
TV
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
menu
AUDIO
Note:
?
If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if
you try
Progressive Scan
on
the DVD/CD receiver.
Each DVD disc has
a
variety of audio output options.
options according to the
Set the receiver's AUDIO
type of audio system you
use.
AUDIO
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to
5.
Pressing
scan
highlight
5.1
Enter.
ENTER will set the
player
to
Select
Speaker Setup
DRC
On
Vocal
On
Progressive
mode.
Caution:
Move
Select
Once the
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit. First,
remove the disc in the DVD/CD receiver. Next, press
STOP
( x ) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
InstaliodSeup
DVD-A
DivX
Speaker Setup DVD-V
volume
balance and
speaker settings, including
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "5.1 Speaker Setup", page 33.)
5.1
Select
Dynamic Range Control (DRC)
DVD-V
DVD-A
DivX
With the DVD*1 format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1:
Dolby Digital only
Vocal
DVD-V
Set Vocal to On
only
DVD is
The karaoke channels
playing.
when
a
multi-channel karaoke
on
the disc will
mix into normal stereo sound.
19
LOCK
Password
(Parental Control)
You
LOCK
Unlock
Rating
Password
Country
****
2. Follow
step
"New" is
Move
Input
Select
Some movies contain
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
more
suitable
scenes as an
If you
4-digit code,
verify.
then press ENTER.
to
forget your Security
Code
1.
2.
Press SETUP to
Input
the
display
the
can
Setup
clear it
menu.
number "210499" and the
6-digit
using
security
control feature allows you to block
3.
Enter
a new
code
as
described above.
to scenes below the
rating you input, thereby
from being able to view
your children
material you believe is unsuitable.
preventing
1. Select
"Rating"
on
the LOCK
menu
Country Code
2. To access the
are
Rating,
Password and
Country Code
prompted
to do so.
Input 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
a
3. Select
rating
a
from 1 to 8
using
1.
1-8:
restrictions
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
on
3.
Select the first character
the LOCK
on
menu
the
then
as
shown left
(Rating).
using
v / V buttons.
Press ENTER and select the second character
using
v / V buttons.
Press ENTER to confirm your country code
selection.
Unlock
same
"Country Code"
Follow step 2
the v / V buttons.
Rating one (1) has the most
and rating eight (8) is the least
Select
2.
4.
restrictive.
If you set
the same
whose standards
press B.
5.
Rating
country/area
used to rate the DVD video disc, based
list in the reference chapter.
were
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you
DVD-V
Enter the code of the
then
press B.
20
or
code is cleared.
parental
scenes
new
again
If you forget your security code you
the following steps:
alternative.
access
(Rating). "Change"
4. Press SETUP to exit the menu.
DVD-V
for children to view.
The
it
2 as shown left
highlighted.
3. Enter the
Rating
change password.
1. Select Password on the LOCK menu then press B.
AU
Code
(Security Code)
enter or
can
OTHERS
DivX(R) VOD
The PBC, Auto
Play
and
DivX(R) VOD settings
can
be
changed.
DivX
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
You
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
DivX(R)
VOD
Your
Select
Video On Demand
registration
code is
To learn
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Select
Move
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
The
PBC
Set
VCD
Playback Control (PBC)
On: Video CDs with PBC
encrypt
to On or Off.
are
played according
Off: Video CDs with PBC
as
Auto
You
are
played
the
same
Audio CDs.
Play
can
Notes:
?
Display
of
the number which you
can
watch the file.
DVD-V
View
set up the DVD/CD receiver so a DVD disc
starts playing whenever the DVD is
DivX(R)
Do you want to
mode is set to On, this DVD/CD receiver
longest playback time
play
back the title
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
use one
of your 3 views now?
will search for title that has the
and then
VOD Rental
This rental has 3 views left.
inserted.
Play
options
viewing
automatically
If Auto
InstaliodSeup
file.
If you rent the DivX VOD file, it has several
limits as shown below.
to the PBC.
way
move
(Yes) (No)
automatically.
?
The rental has been
expired.
Note:
?
The Auto
Play
function may not work for
some
Rental
Expired
DVDs.
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
Operation
Playing
a
DVD
or
Video CD
General Features
Note:
PLAYBACK SETUP
Turn
1.
on
?
the TV and select the video
input
source
connected to the DVD/CD receiver.
Turn
2.
the
on
the audio system (if applicable) and select
source connected to the DVD/CD
Unless stated otherwise, all operations described
the remote control. Some features may also be
available on the Setup menu.
use
MOVING TO ANOTHER TITLE/GROUP
input
receiver.
When
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
playback
side down.
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
4.
press PLAY.
In
some cases,
the disc
menu
might
more than one title/group, you can
title/group. Press DISPLAY while
playback is stopped then the appropriate number (0-9)
or use b / B to move to another title/group.
You can play any title by inputting its number while
playback is stopped.
move
MOVING TO ANOTHER CHAPTER/TRACK
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
When a title on a disc has more than one chapter
disc has more than one track, you can move to
another chapter/track as follows:
screen.
?
Use the bBvVbuttons to select the
Use the 1 2
buttons to select
4
3
title/chapter
an
option
you
Press SKIP . twice
?
?T
Menu
settings
and
operating
SEARCH
Off
1.
(See
"PBC"
on
page
21).
control is set and the disc is not within
parental
the rating settings
(See "Lock Menu"
you must
on
page
input
20).
the
password.
DVDs may have a region code. Your receiver does
not play discs that have a region code different from
your receiver. The
(four).
Press and hold SKIP/SCAN .
two seconds
Notes:
If
region
code for this receiver is 4
step back
to
to the
o go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
procedures
briefly
previous chapter/track.
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen.
or a
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
want, then press ENTER to view the option.
?
disc has
appear
instead:
?
a
to another
now
go into SEARCH mode.
Press and hold SKIP/SCAN .
repeatedly
to select the
or
or
>
required speed:
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4
3.
> for about
during playback.
The receiver will
2.
or
or
X100
X8
To exit SEARCH mode, press PLAY.
Note:
?
using a DVD audio disc that includes
pictures, this operation may be permitted in some
picture segments.
When
CHANGING THE AUDIO CHANNEL
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
different audio channel
22
a
Still Picture and
Frame-by-Frame
REPEAT
Playback
You
play
can
a
Press REPEAT
1.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
repeat mode.
DVD Video Discs
?
?
2.
To exit still motion mode, press PLAY.
?
Note:
?
this
?
segments.
?
?
PressSLOWSCAN-morM+during
playback.
?
?
The DVD/CD Receiver will enter SLOW mode.
required speed: t 1/16, t 1/8, t 1/4, or t 1/2
(backward), or T 1/16, T 1/8, T 1/4, or T 1/2
(forward).
a
DivX Disc and Video
changes: T 1/16,
(forward).
3.
or
T 1/2
-
To exit Slow Motion mode, press PLAY
Off
does not
:
play repeatedly.
?
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
To
(N).
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
playback
in
reverse
is not
possible
with
audio
1.
using a DVD audio disc that includes pictures,
operation may be permitted in some picture
Press DISPLAY
When
2.
3.
1.
2.
3.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
"
A
*
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
"
To start
screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
to select the sound
or 4
TIME SEARCH
Press A-B
Press A-B
during playback.
To turn off the 3D Surround effect, select "Normal".
REPEAT A-B
a
Use 3
The sound
segments.
To repeat
Repeat Track/Group/Off
the five+
Slow motion
this
-
Track: repeats the current track.
Group: repeats the current Group.
3D SURROUND
Video CDs and DivX Discs.
?
?
CD, the Slow speed
T 1/8, T 1/4
Notes:
?
CDs, DivX discs Repeat Track/All/Off
: repeats the current track
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
Track
Notes:
UsetheSLOWSCAN-morM+ toselectthe
With
Repeat Chapter/Title/Off
chapter.
the current
Title: repeats the current title.
Off : does not play repeatedly.
DVD Audio Discs
SLOW SCAN
2.
-
Chapter: repeats
Video
using a DVD audio disc that includes pictures,
operation may be permitted in some picture
When
1.
title/chapter/all/track/group on a disc.
during playback to select a desired
to cancel.
1.
end
point.
screen
and the
playing
at any chosen time on the disc:
Press DISPLAY
box shows the
2.
3.
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon
and "-:--:--" appears.
Input
the
required
start time in
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
seconds from left to
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
23
Use
to
zoom
the video
enlarge
Press ZOOM
1.
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
Each press of the ZOOM button changes the TV
in the sequence: 100% size
400% size
2.
screen
→
→
screen
fit mode
→
100% size
DISCS: MENUS
DVDs may offer menus that allow you to access
features. To use the disc menu, press DVD
special
MENU.
can
the way the
change
when
screen
image appears on
you're playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
Use the bBvVbuttons to
zoomed
To
4.
move
through
Press TITLE. If the current title has
1.
the
picture.
playback,
?
Zoom may not work
on some
DVDs.
You
desired
point
the TV
screen
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
Clear
To Recall
or
1.
During
disc
search
menu
3.
a
playback,
appears
press SEARCH. The marker
on the screen.
Press ENTER and
scene.
playback
a
marker
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
again
can play any marker by
the marker search menu.
inputting
PAUSE
2.
as camera
options,
angles,
and
menu
is
displayed.
Press
to exit.
recorded at different
Tip:
The
angle indicator
will blink
recorded at different
angles
on
the TV
as an
screen
during scenes
angle
indication that
switching is possible.
CHANGING THE AUDIO LANGUAGE
its number
Press AUDIO
repeatedly during playback
language or audio track.
to hear a
With DVD-RW discs recorded in VR mode that have
Press PAUSE/STEP
To return to
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
different audio
1.
subtitle
DISC MENU
If the disc contains
on
Marked Scene
Within 10 seconds, press b / B to select
number that you want to recall or clear.
marked
offers features such
menu
the
CAMERA ANGLE
from up to nine memorized
marker, press MARKER at the
a
markers.
2.
may appear.
MENU
playback
To enter
points.
menu
a menu,
Otherwise, the disc
screen.
Marker
start
can
on
Press MENU and the disc
MARKER SEARCH
a
the
Press TITLE to exit.
3.
Screen fit mode is available for playing the DVD disc, VR
disc and movie file.
To enter
appears
spoken language and
chapters for the title.
press CLEAR.
Notes:
?
the
menu
The
2.
normal
resume
corresponding number or use
highlight your selection.
TITLE MENU
and Maximum.
3.
the
Input
bBvVbuttons to
Then press ENTER.
Screen fit mode:
You
CHECKING THE CONTENTS OF DVD
→
1600% size
the
DVD Features
Special
ZOOM
during playback.
playback,
press PLAY.
both
a
main and
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
SUBTITLES
Press S-TITLE
repeatedly during playback
languages.
to see the
different subtitle
Notes:
?
The subtitle file of the DivX file is
displayed only smi,
srt
and sub.
?
If there is no information
1
read in the DivX file,
"
24
or
"
there is
etc are
a
code that
displayed.
can
not
DVD Audio Discs
DVD Audio is
success
disc format
building
provide high quality,
a new
of DVD to
Moving
multi-channel audio for
on
Some DVD Audio discs divide content into different
the
uncompressed,
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on
a new
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
the disc itself.
DVD Audio
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
to another GROUP
typical
the data
Group
can
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
DVD Audio disc contains up to seven times
capacity of a CD. This additional space is
used for music, either Advanced Resolution multiquality that is closer to the artist's
channel sound
master
during playback
recording
or
Audio discs contain
for
longer recordings. Many
DVD
text, such as artist
lyrics. Some DVD Audio
on-screen
biographies, playlists, or
photo galleries
discs contain
or
video
clips.
Press 1/2
3.
or
on
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
a
Note:
Sometimes the author of the disc creates hidden
content that can
only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you'll find it on the
disc's jacket cover or on a web site). This password
it is
control isn't dictated by your DVD/CD receiver
---
a
function of the disc.
Since the
available
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
Viewing
another PAGE
of the
some
on-screen
Note:
To
enjoy
maximum sound
quality
and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though
you're playing a DVD Audio disc.
Since DVD Audio discs
can
hold
a
Operation
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
authoring of DVD Audio Discs varies,
display choices might not be
for the disc you're playing.
some
on-screen
available
25
Playing
Audio CD
an
or
MP3/WMA
Disc
The DVD/CD receiver
recordings
can
play
CD-ROM, CD-R,
on
MP3/WMA formatted
CD-RW discs.
or
MP3 / WMA disc
limited
?
Audio CD
?
1/12
?
?
List
Program
?
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Clear All
Track8
PROGRAM
Edit
?
-
1.
?
Press v / V to select a
folder, and press ENTER
to see the folder contents.
2.
creates an ISO 9660 file
system.
File
a
names
or
They
should not
Program
2-Music2
are
There
are
3-Music3
6-Music6
Clear All
7-Music7
Info
PROGRAM
Edit
ID3 TAG
file
information, "NO ID3 TAG" appear
no
on
the
display.
If you
are
in
a
file list
return to the Folder
on
list,
the MUSIC
use
menu
the v / V to
and want to
highlight
press ENTER.
?
?
Press DVD MENU to
move
to the next page.
On
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
26
required
on
top of the
menu
is
highlighted.
and
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
owner.
Tip:
?
recordings
many different types of recordable disc
Customers should note that
containing information such as track
titles, you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
a
discs and
(including CD-R containing MP3 or WMA
files) and these require certain pre-existing
conditions (see above) to ensure compatible
playback.
5-Music5
If there is
requires
formats
4-Music4
playing
the disc should be
optimal playback quality. Pre-recorded
automatically set to these standards.
DVDs
1-Music1
?
on
less than 650.
achieve
List
When
an
The total number of files
This DVD/CD receiver
1/12
0:00:00
?
maximum of 8 letters
.mp3 or .wma extension.
contain special letters such as /
incorporate
to meet certain technical standards in order to
MUSIC
DISPLAY
should have
?*:"<>letc.
?
Press v / V to select a track then press PLAY
ENTER. Playback starts.
-
-
and must
MP3 / WMA
is
-
AUDIO CD
0:52:07
player
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
within 32
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
with this
compatibility
follows:
as
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
REPEAT A-B
Features
1.
To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear
PAUSE
2.
1.
Press PAUSE/STEP
2.
To return to
ENTER
or
3.
MOVING TO ANOTHER TRACK
Press SKIP
(.
or
Press A-B
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
>) briefly during playback
beginning
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
menu screen.
3D SURROUND
to go to the next track or to return to the
of the current track.
To
Press SKIP . twice
the five+
2.
track.
You
play
3.
previous
can
briefly
to go back to the
produce
by inputting
its number.
REPEAT TRACK/ALL/OFF
a
3D surround effect that simulates multi-
channel audio from two stereo
audio
any track
menu screen.
repeatedly.
press PAUSE/STEP
1.
the
Repeat
during playback.
playback, press PLAY,
again.
on
1.
2.
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
Press AUDIO
during playback.
"3D SUR." appears
on
To return to normal
playback, press AUDIO
disappears from
repeatedly
the
until "3D SUR."
menu screen.
the
menu screen.
You
1.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The repeat
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired repeat mode.
Track: repeats the current track
repeats all the tracks on a disc.
All:
Off(No display):
does not
play repeatedly.
Note:
If you press SKIP (>) once
the repeat playback cancels.
during Repeat Track playback,
SEARCH
1.
Press SCAN
2.
Press SCAN
3.
To exit SEARCH mode, press PLAY.
(m
or
M) during playback.
(m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
27
REPEAT PROGRAMMED TRACKS
Programmed Playback
1.
program
Press REPEAT when
Insert
2.
disc.
a
Audio CD
Press REPEAT to select
?
MP3/WMA Discs:
or
AUDIO CD
2.
MUSIC
or
menu
?
to exit the
then the
again,
Program Edit mode.
disappear
E
Program
1/12
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
4-Music4
Track6
5-Music5
2.
Press CLEAR.
to erase additional tracks
Repeat
the list.
6-Music6
Clear All
Clear All
7-Music7
DISPLAY
Audio CD Menu
ERASING THE COMPLETE PROGRAM
PROGRAM Edit
Info
LIST
MP3/WMA Menu
Video CD: Press PROGRAM while
playback
is
The program menu appears. Press
again and hold it down for a few
stopped.
PROGRAM
seconds to exit the
menu.
Video CD with
menu
Press B to
2.
Use v / V to select "Clear All", then press ENTER.
PBC, you must set PBC to Off on the
programmed playback (See "PBC" on
to use the
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
Select
a
track
on
the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
Press B.
Select the track you want to start
"Program" list.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
list have
"Program"
resume
playback,
normal
select
a
played
once.
playback
from
programmed
(or MUSIC)
track of AUDIO CD
list and then press PLAY.
move
to the
"Program"
list.
Note:
21).
To
1.
The programs
Note:
28
during Repeat Track playback, the
Use vVBto select the track that you wish to
from the Program list.
on
PROGRAM Edit
6.
once
2-Music2
Track5
Track8
5.
play repeatedly.
erase
List
Track7
4.
does not
LIST
1.
0:00:00
List
3.
Off(No display):
repeat playback cancels.
MUSIC
1/12
0:52:07
mark will
E
AUDIO CD
page
Track: repeats the current track
repeats all the tracks on programmed list.
ERASING A TRACK FROM "PROGRAM"
Press PROGRAM
a
desired repeat mode.
All:
If you press >
E
Note:
setup
a
Note:
mark will appear to the right of the word
"Program" on the right side of the menu screen.
On
disc. The repeat
appears.
Press PROGRAM.
The
a
contain 30 tracks.
can
?
1.
playing
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory. A
are
also cleared when the disc is removed.
Viewing
JPEG Disc
a
this DVD/CD receiver you can view Kodak
PICTURE CDs and discs with JPEG files.
Using
1.
Insert
a
appears
disc and close the tray. The PHOTO
on the TV screen.
menu
ZOOM
JPEG
Use
zoom
(see
page
to enlarge
24)
photo image.
JPEG
TO ROTATE PICTURE
Press v / V
PHOTO
the
picture
during showing
clockwise
a
picture
to rotate the
counter clockwise.
or
Preview
List
JPEG Folder 1
TO LISTEN TO MP3/WMA MUSIC
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG
WATCHING PICTURE
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
You
JPEG Folder 8
can
display
files while
music files recorded
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears.
If you are in a file list and want to return to the
previous
Folder list,
remote to
3.
use the v / V buttons on the
and press ENTER.
highlight
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
?
Press MENU to
There
or
to move
On
containing
to MP3/WMA
disc.
the two types of file in
display PHOTO
Press TITLE to
3.
Press v / V to select
4.
Use B to select
starts. The
STOP is
a
photo
menu.
file.
icon then press ENTER.
playback will continue until
pressed.
Tip:
To listen to
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Operation
to the next page.
three Slide
are
(Fast),
JPEG disc
>>
to
limited
?
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
?
same
player.
2.
PLAY.
:
Speed options
(Normal), and > (Slow).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
>>>
?
move
Insert the disc
the
Playback
Tips:
?
1.
listening
the
on
top of the
on
menu
is
as
compatibility
with this
Depending
upon the size and number of JPEG
a long time for the DVD/CD
receiver to read the disc's contents. If you don't
display after several minutes,
highlighted.
see an on-screen
of the files may be too large
reduce the
resolution of the JPEG files to less than 2M pixels
some
JPEG
as
Use vVbBto
press ENTER.
highlight
is
files, it could take
Press RETURN, information of file is hidden.
SLIDE SHOW
player
follows:
the
(Slide Show)
then
?
---
2760
x
2048
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
STILL PICTURE
?
JPEG
Some discs may be incompatible due to a
recording format or the condition of disc.
different
1.
Press PAUSE/STEP
The
2.
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
MOVING TO ANOTHER FILE
or
Ensure that all the selected files have the
extensions when
press
JPEG
?
?
If the files have
".jpe"
please
them
File
rename
names
without
able to be read
Press SKIP
(. or >) or cursor (b or B) once
viewing a picture to advance to the next or
previous file.
while
copying
though
the files
Windows
by
or
as
into the CD
".jpg"
layout.
".jpeg" extensions,
".jpg" file.
".jpg"
extension will not be
this DVD/CD receiver. Even
are
shown
as
JPEG
image
files in
Explorer.
29
Maintenance and Service
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
using
using
the DVD-Video format that have been finalized
a
?
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
a
appears
When
shipping
save
?
?
or
Notes:
Do not
played
in this
player.
are
made with CPRM data
by
DVD
RECORDER. Player does not support these kinds of discs
and display the "CHECK DISC".
What is 'CPRM'?
only
a
copy
allowing the
protection system (with scramble system)
recording of 'copy once' broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
player is CPRM compatible, which means that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
This
can
can
only be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
volatile
liquids
such
as
insecticide
or plastic products in contact
long period of time. since they
Do not leave rubber
a
leave marks
the surface.
on
the unit
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
Do not
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
Maintaining
the Unit
The DVD/CD receiver is
a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
service center.
30
packing
To clean the
or
CPRM is
carton and
the unit.
with the unit for
surfaces
Some DVD-VR disc
use
near
Cleaning
Unfinalized DVD-R/RW discs cannot be
original shipping
the exterior surfaces clean
spray
Press v / V to select a track then press PLAY
ENTER and playback starts.
the
the unit
factory.
Keeping
?
before
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the
?
chapter
service technician.
HANDLING THE UNIT
Please
disc and close the tray. The DVD-VR
on the TV screen.
Insert
menu
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
Using
this DVD/CD receiver you
can
play
with this
player
is limited
DivX disc.
?A vailable resolution size of the DivX file is under
disc and close the tray. The MOVIE
appears on the TV screen.
Insert
1.
compatibility
follows:
a
menu
720x576
?
The file
(W
H) pixel.
x
of the DivX subtitle is available
name
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible
code to express in the DivX
as
mark on the
"
file, it may be displayed
Movie Folder 2
Movie Folder 3
Movie Folder 4
"
_
display.
Movie Folder 5
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons on the remote to
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
3.
PLAY.
GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
are different levels of GMC encoding, usually
Press STOP to exit.
4.
audio is
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
*
or
or
outputted.
and
highlight
press ENTER.
If the video and audio structure of recorded
file is not interleaved, either video
There
called
Tips:
?
?
Press DVD MENU to
On
move
is
a
MUSIC, PHOTO and MOVIE word
highlighted.
or
3-point GMC.
to the next page.
CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and
1-point, 2-point,
on
top of the
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Operation
"
menu
Playable Codec
format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable Audio
format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit
32
48kHz
(WMA)
rate: within 8 320kbps (MP3),
192kbps (WMA)
-
-
-
31
Additional Features
LAST SCENE MEMORY
This receiver memorizes last
SYSTEM SELECT
scene
from the last disc
remains in memory
the disc from the receiver or
that is viewed. The last
scene
if you remove
switch off the receiver. If you load a disc that has the
scene memorized, the scene is automatically recalled.
even
Note:
This receiver does not memorize the
switch off the receiver before
scene
commencing
of
to
a
disc if you
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display
window, press and hold PAUSE/STEP
panel
or
able to select
AUTO:
play the disc.
menu.
With certain discs, the playback
flickering or Dot Crawl is shown
Vertical
picture may be
straight lines.
interpolation or De-interlace is
on
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
not
video mode.
?
To
change
the video mode, press and hold
during disc playback.
DISPLAY about 3 seconds
The
on
has
until
?
new
screen.
Video mode
→
change
MODE2
displayed
quality
procedure
Check whether the video
improved. If not, repeat the
picture quality is improved.
MODE1
?
video mode number selected is
the TV
→
above
sequence:
MODE3
→
MODE1
If you turn off the power, the video mode will be
back to initial state (MODE1).
Tip:
Detailed
Descriptions
for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
32
system (PAL, NTSC,
or
AUTO).
Select when DVD/CD Receiver is connected
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
The video mode setting only works when the
Progressive Scan mode is set to "On" in the Setup
means
a
with Multi
VIDEO MODE SETTING
That
the front
When the selected system does not coincide with
the system of your TV, normal colour picture may
not be displayed.
NTSC:
?
on
remote control for more than 5 seconds to be
PAL:
Select when DVD/CD Receiver is connected
with PAL-TV.
5.1
Speaker Setup
This
to
chapter includes important reference
help you set your DVD/CD receiver.
information
If you connected speakers to your DVD/CD receiver,
the Distance lets the speakers know how far
setting
Speaker Setup
Make the
Distance
following settings
for the built-in 5.1 channel
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
surround decoder.
Press b / B to
1.
Press SETUP. The setup
2.
Use v / V to select the AUDIO
B to
3.
menu
speaker.
[0.3(1)m(ft)
appears.
option
Use v / V to select the
press B to
move
6.0(20)m(ft)]
Test
Speaker Setup option
then
to the third level. "Select" is
highlighted.
Press b / B to test the
signals
Press ENTER and 5.1
Speaker Setup
menu
memorized in the system.
Front Left (L)
Center
Rear
Right (R)
appears.
You
AUDIO
Speaker
Distance
Test
adjust
Large
dB
0
m(ft)
0.6(2)
→
Front
Rear Left
the volume
use v
→
(L)
speaker. Adjust
signals
Right (R)
→
→
SubWoofer
during operating the test
or Speaker
/ V to select Volume
option then use b / B buttons to select volume or
speaker, so that all speaker's volume is same from
the listener's position.
During operating the test tone, if you adjust the
volume, it will be paused in the current speaker
Front L
Operation
channel.
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
can
tone, first
Size
Volume
of each
the volume to match the volume of test
→
4.
time.
then press
to the second level.
move
-
adjust
same
the Distance of the selected
Enter
speaker.
v / V / b / B buttons.
Press ENTER to confirm your selection. Returns to
the
previous
Speaker
menu.
selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you cannot
the
Volume
Press b / B to
speaker. (-6dB
adjust the output
+6dB)
level of the selected
~
33
the Radio Stations
Presetting
You
tuning,
make
sure
that you have turned down
the volume.
on
the remote control until FM
appears in the
(MW)
memory first
or
AM
display
on
the
Press and hold TUNING
the front
or
starts to
on
Press PRESET +/-
tunes in one
then
change,
or
FM appears in the
repeatedly
the remote
on
control to select the preset station you want.
Each time you press the button, the DVD/CD Receiver
for about two seconds until the
panel
frequency indication
(MW)
window.
The last received station is tuned in.
2.
(MW) changes alternately.
3.
Press BAND until AM
1.
window.
display
And then every time you press BAND, FM and AM
2.
radio stations"
(see "Presetting
left).
Press BAND
1.
to the Radio
Preset radio stations in the DVD/CD Receiver's
preset 50 stations for FM and AM (MW).
can
Before
Listening
3.
release.
preset station
at a time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
-
Scanning stops
when the DVD/CD Receiver tunes in
station. "TUNED" and "ST."
in the
A
on
the front
preset number will flash in the
panel
display
or
to select the
the front
select another function mode
the front
on
on
Press POWER to turn the DVD/CD receiver off
panel.
window.
preset number you
Press MEMORY/STOP
6.
program) appear
To turn off the radio
Press TUNING
5.
a
display window.
Press MEMORY/STOP
4.
(for
stereo
want.
To listen to non-preset radio stations
Use manual
panel again.
For manual
The station is stored.
7.
Repeat steps
on
3 to 6 to store other stations.
or
automatic
tuning,
For automatic
a
station with
Press TUNING
a
weak
repeatedly
or
3 to tune in the station
front
signal
in
You
To clear all the stored stations
Press and hold MEMORY/STOP for about two
in the
display
again, the
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
the "CLEAR ALL"
change
display
will go off
by
itself and
to normal mode.
Note:
already
To
change
above.
been entered, the FULL
34
a
the preset number, follow the steps 5-6
panel repeatedly.
press and hold TUNING
tuning,
on
the
the number buttons
as
on
the remote
preset radio station directly.
For example, to listen to preset station 4, press 4
the remote control. To listen to preset station 19,
press 1 then 9
a
(within
3
For your reference
If an FM program is
Press MONO/ST.
disappears
stereo
To
If all stations have
or
preset radio station directly
a
can use
in the
effect, but
the button
message will appear in the display window for
moment and then a preset number will flash.
2.
for about two seconds
control to select
appeared
step
panel.
To select
window and then press MEMORY/STOP
stations are cleared.
in
step
manually.
seconds and "CLEAR ALL" is
tuning
press TUNING
the front
or
To tune in
or
(CD/DVD, VIDEO1, etc.,).
again
on
seconds).
noisy
panel so that "ST."
display window. There will be no
the reception will improve. Press
on
the front
to restore the stereo effect.
improve reception
Reorient the supplied antennas.
Sleep
You
can
Timer
Setting
Selecting input
You
set the DVD/CD Receiver to turn off
at a specified time.
Press SLEEP to set the desired
The SLEEP indicator and
sleep
time.
sleep time appears
in the
Each time you press SLEEP the
in the following order.
the unit for further information
setting
SLEEP180→150→120→90→80→70→60→50→40→
AV 1: for
selecting the analog signal from
(L/R) & VIDEO IN Connectors.
remaining
AV 1 COAX:
AV 2: for
?
Press MUTE to mute your unit.
can mute your unit in order, for example, to
answer the telephone, "MUTE" indicator flashes in the
display window.
Using Headphone
Connect a stereo headphone
PHONES connector.
The
AV1
for
selecting the coaxial digital signal from
AV2 AUDIO IN
Notes:
?
The
Optical input function is available only when
Sampling Frequency is 32 96kHz.
You can also select the input source by pressing
FUNC./PLAY button on the front panel.
other unit's
You
selecting the optical digital signal from
selecting the analog signal from
(L/R) & VIDEO IN Connectors.
repeatedly.
Mute
AV1 AUDIO IN
AV1 VIDEO IN & COAXIAL IN Connector.
Dimmer
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
control to
VIDEO IN & OPTICAL IN Connector.
before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
you
repeatedly on the remote
input source.
AV 1 OPT: for
check the time
the
Each time you press this button, the mode of the
changes in the following sequence:
Note:
can
on
function
30→20→10→OFF
You
or Optical
supplied with
operation.
select the desired
changes
?
source
other units connected to the
connector. Refer to the owner's manual
Press AUX
display window.
2.
or
AV1, AV2 connectors, Coaxial connector
automatically
1.
VCRs
can use
the
~
Press and hold down this button about 3 seconds,
repeatedly to select input source.
then press
Jack
plug ( 3.5mm)
into the
speakers are automatically disconnected
plug in a headphone (not supplied).
when
35
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
36
following
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
Switzerland
CH
CO
Indonesia
ID
Nigeria
Norway
NG
Colombia
NO
Thailand
TH
Congo
CG
Israel
IL
Oman
OM
Costa Rica
CR
Italy
IT
Pakistan
PK
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Panama
PA
Ukraine
UA
Czech Republic
Denmark
CZ
JP
United States
US
KE
Paraguay
Philippines
PY
DK
Japan
Kenya
PH
Uruguay
UY
Ecuador
EC
Kuwait
KW
Poland
PL
Uzbekistan
UZ
Egypt
EG
LY
Portugal
PT
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Romania
RO
Zimbabwe
ZW
Russian Federation
RU
AF
SG
SK
TR
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power is on, but
the DVD/CD Receiver
?
The power cord is disconnected.
?
No disc is inserted.
?
The TV is not set to receive DVD
?
Plug the power cord
wall outlet.
?
picture.
signal
output.
?T he video cable is not connected
lit.)
There is
no
sound
or
?
very low-level
sound is heard.
only
a
The connected TV power is turned off.
equipment connected with the
audio cable is not set to receive DVD
The
?T
?
signal output.
?
The audio cables
not connected
are
?
?
The
playback picture
is
?
The power of the equipment connected
with the audio cable is turned off.
The audio
connecting
The disc is
poor.
The DVD/CD Receiver
does not start playback.
?
?
urn on
the TV.
Select the correct input mode of the
audio receiver so you can hear the
sound from the DVD/CD Receiver.
Connect the audio cable into the
jacks securely.
securely.
?
screen.
Connect the video cable into the
jacks securely.
securely.
?
into the
Select the appropriate video input
mode on the TV so the picture from
the DVD/CD Receiver appears on the
TV
?
securely
Insert a disc. (Check that the DVD or,
audio CD indicator in the DVD display
is
does not work.
No
service.
cable is
damaged.
?T
urn on the equipment connected
with the audio cable.
?
?
dirty.
No disc is inserted.
?
An
?
unplayable
disc is inserted.
Replace
it with
new one.
Clean the disc.
Insert a disc. (Check that the DVD, or
audio CD indicator in the DVD display
is lit.)
Insert a playable disc. (Check the
disc type, colour system and Regional
code.)
?
The disc is
placed upside
?T h edisc is not
placed
down.
within the
?
guide.
?
Place the disc with the
down.
playback
side
Place the disc on the disc tray
inside the guide.
correctly
?
The disc is
?Amenu
?
Loud hum
heard.
or
noise is
?
?
?
The
is
on
Rating
The disc is
?
dirty.
the TV
?
screen.
level is set.
?
?
dirty.
The speakers and components
connected poorly.
are
The DVD/CD Receiver is located too
close to the TV.
?
Clean the disc.
Press the SET UP button to turn off
the menu screen.
Cancel the Rating function
the rating level.
or
change
Clean the disc.
Connect the
speakers
and
components securely.
?
Move your TV away from the audio
components.
37
Cause
Symptom
Radio stations cannot
be tuned in.
?
The antenna is
Correction
positioned
or
connected
poorly.
?
?
?
The
signal strength of the stations is
(when tuning in with automatic
tuning).
too
Connect the antenna
?T
une
in the station
weak
?N
o stations have been preset or preset
stations have been cleared (when
?
securely.
Adjust the antennas and connect
external antenna if necessary.
Preset the stations
an
manually.
(page 34).
tuning by scanning preset stations).
The remote control
does not work
properly.
?T he remote control is not
?
?
?
The front panel
display is too dim.
38
pointed
at the
?
remote sensor of the DVD/CD Receiver.
?
The remote control is too far from the
DVD/CD Receiver.
There is an obstacle in the path of the
remote control and the DVD/CD
Receiver.
The batteries in the remote control
flat.
Nothing
display.
is
displayed
on
the front
are
panel
Point the remote control at the remote
of the DVD/CD Receiver.
sensor
?
?
?
?
Use the remote control within about 20
ft (6 m).
Remove the obstacle.
Replace
the batteries with
Press DIMMER
on
new ones.
the remote control.
Specifications
Power
Power
Refer to main label
supply
consumption
Refer to main label
Mass
Gen ral
External dimensions
CD/ VD
(W
x
H
x
D)
Tuner
[MW]
x
350
mm
Laser
Semiconductor laser,
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
Video input
PAL 625/50, NTSC 525/60
to
35°C, Operation
wavelength
Suplied Acesori
Designs
650
nm
(1 kHz, NOP
-6 dB, 20 kHz
LPF/A-Filter)
More than 70 dB
(1 kHz, at 1W position) (20 kHz LPF)
(p-p), 75 Ω, negative sync., RCA jack x 2
1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin
(C) 0.3 V (p-p), 75 Ω
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 %
1.0 V
108.0 MHz
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
87.5
Stereo mode
90W+90W(6Ωat1kHz,THD10%)
Front: 90W + 90W (THD 10 %)
-
or
65.0
74.0 MHz, 87.5
-
-
x
1
1
108.0 MHz
10.7 MHz
60 dB
150
522
(Mono)
8,000 Hz
-
1,611 kHz
-
530
or
-
1,610 kHz
450 kHz
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Centre*: 90W
Inputs
Outputs
VIDEO 1, VIDEO 2, COAXIAL AUDIO, OPTICAL AUDIO
Surround*: 90W
90W
+
Subwoofer*: 150W
(4Ω
(6Ω
kHz, THD 10 %)
Hz, THD 10 %)
at 1
at 30
S-VIDEO, MONITOR, PHONES: (32 Ω, 1.0 V)
Front/Rear Speaker
Centre speaker
(LHS-T6740T)
Speakrs
status: Horizontal
150 Hz to 18 kHz
More than 75 dB
Surround mode
Amplifer
60
5% to 85%
COMPONENT VIDEO OUT
AM
x
Temperature: 5°C
S-video output
FM
kg
430
Operating conditions
Operating humidity
Video output
Video
4.4
Type
Impedance
Frequency Response
2
5
Speaker
150
-
Way
(1m)
90W
180 W
H
x
D)
5
Speaker
70x1200x72mm
3.2kg
150
-
20,000 Hz
84 dB/W
(LHS-T6740W)
1
Way
1
Speaker
4Ω
6Ω
20,000 Hz
84 dB/W
Rated
x
2
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Way
Passive Subwoofer
(LHS-T6740C)
(1m)
90W
180 W
440x88x77mm
1.8kg
40-200Hz
83 dB/W
(1m)
150 W
300 W
195x398x417mm
7.6kg
?Speakers...........................6?Speakercables...................6
?AMloopantenna.....................1?FMantenna.....................1
?Remotecontrol......................1?Batteries(AAA)...................2
and
specifications
are
subject
to
change
without notice.
39
P/N: 3834RH0063E
Download PDF

advertising