LG LPC-LM340A Owner's manual

LG LPC-LM340A Owner's manual
SAKAL_LPC-LM340/345-Eng_3834RC0024R
MP3/CD CASSETTE
RECORDER
OWNER'S MANUAL
MODEL: LPC-LM340A/X
LPC-LM345A/X
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
without
CAUTION
Use of controls
or adjustments or performance
procedures other than those specified here-
of
RISK OF ELECTRIC
in may result in hazardous radiation exposure.
SHOCK DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
BACK) NO
Laser component in this product is capable of
emitting radiation exceeding the limit for Class
1.
COVER(OR
USER SERVICEABLE PARTS
CAUTION:INVISIBLE LASER RADIATION
INSIDE. REFER SERVICING TO QUALIFIED
WHEN OPEN AND INTERLOCKS
SERVICE PERSONNEL.
DEFEATED. AVOID EXPOSURE TO
BEAM.
VARNING:OSYNLIG
Explanation Graphical Symbols:
NAR
lightning flash with arrowhead
symbol, within an equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage within the product's
The
enclosure that may be of sufficient
magnitude to constitute a risk of elec-
DENNA DEL
STRALEN AR
LASERSTRALNING
AR OPPNAD
FARLIG.
Attention:Quand l'appareil est ouvert,
ne
pas s'exposer aux radiations invisibles du
faisceau laser.
This label is located
on
the interior.
tric shock to persons.
point within an
equilateral triangle is intended to
The exclamation
alert the
user
to the presence of
important operating and maintenance(servicing) instructions in the
literature accompanying the appliance.
WARNING
This
Compact Disc player is classified
CLASS 1 LASER product.
TO REDUCE THE RISK OF FIRE OF ELEC-
The CLASS 1 LASER PRODUCT label is locat-
TRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
ed
To avoid electrical shock, do not open the cabinet, Refer servicing to qualified personnel only.
The
apparatus shall not be exposed to dripor splashing and that no objects filled
with liquids, such as vases, shall be placed
on the apparatus.
ping
Do not install this
space such
2
a
equipment
bookcase
or
in
a
confined
similar unit.
on
the exterior.
as a
Contents
1Introduction.......................4
.4
SymbolsUsedinthisManual
NotesonTapes.....................4
.
.
.
.
.
.
.
.
.
NotesonDiscs......................4
Handlingdiscs...................4
Storingdiscs....................4
Cleaningdiscs...................4
Front/Rear/BottomPanel.............5
RemoteControl.....................6
DisplayWindow.....................6
2Installation..........................7
TheACPowerCordConnection
.
.
.
.
.
.
.
.7
.7
Adjusting the voltage (OPTIONAL)
BatteryInstallation...................7
.
.
.
.
.
.
Unit...........................7
RemoteControl..................7
SoundAdjustment...................8
VolumeAdjustment...............8
.8
SoundQualityAdjustment
.
.
.
.
.
.
.
.
.
MUTE.........................8
TapePlayback.....................12
BasicPlayback.................12
ToStopPlay...................12
.12
To Play Rewind or Fast Forward
Auto Stop Deck :
.12
LPC-LM340A/X model only
Auto Reverse Deck
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
:
LPC-LM345A/X model only
.12
.12
LocalRepeat(OPTIONAL).
TapeRecording....................12
BasicRecording................12
.12
RecordingfromRadioorCD
CD to Tape Synchronized Recording 12
CDPlayback......................13
BasicPlayback.................13
PausePlayback.................13
StopPlayback..................13
SkippingaTrack................13
SearchingaTrack...............13
Repeat.......................13
ProgramPlay...................13
.
.
.
.
.
.
.
.
.
.
.
.
.
UBB...........................8
HeadphoneSocket...............8
.8
Micphone Socket (OPTIONAL)
.
.
.
.
.
3Operation...........................9
4Maintenance.......................14
ShippingtheUnit...................14
CleaningtheUnit...................14
Troubleshooting....................14
AutoFunctionSelection...............9
SettingtheClock....................9
UsingtheSleepFunction.............9
.9
Using Microphone (OPTIONAL)
.
.
.
.
.
.
.
.
5Reference..........................15
Remote Control Operation Range
.15
Specifications......................15
.
.
.
.
.
Timer............................10
.11
Presetting the Radio Stations
ListeningtotheRadio...............11
.
.
.
.
.
.
.
.
3
Introduction
1
To ensure proper use of this product, please read
this owner's manual carefully and retain for
Notes
future reference.
Handling discs
on
on
Discs
Do not touch the
This manual
provides information
the operation and maintenance of your CD player. Should
the unit require service, contact an authorized
service location
and
(refer
to
on
the disc
get
on
playback side of the disc. Hold
by the edges so that fingerprints do not
the surface. Never stick paper
or
tape
on
the disc.
Maintenance
Chapter 4,
Service).
Symbols
Symbols
Used
Used in this Manual
Indicates hazards
the unit itself
Indicates
or
likely
to cause harm to
other material
special
notes and
damage.
operating
features.
Storing discs
After playing, store
to direct
Notes
on
on
Tapes
Tapes
Preventing record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
the disc in its
case.
Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the
disc from the center out.
Tab for side A
Tab for side B
To record
again,
cover
the hole of the tab with
anti-static spray intended for older
adhesive tape.
Adhesive tape.
4
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or
vinyl records.
Front Panel
13
14
11
12
10
1
Introducin
9
23
8
4
4
567
1.
2.
3.
VOLUME (
UBB button
?
/
) button
7.
8.
TAPE button
TAPE DOOR
?
?
CD button
?
TUNER/BAND button
?
4.
LEFT/RIGHT SPEAKER
?
5.
LCD (DISPLAY
6.
?
?
?
?
WINDOW)
TAPE REWIND/FAST FORWARD
?
PRESET(-/+), CD
PLAY
() [TAPE REVERSE
) ,TAPE
(
PLAY
(
PLAY
STOP (
)/CLEAR
:
LPC-LM345A/X
only
TIMER button
10.
?
CD SYNC button
PROGRAM/MEMORY button
(STANDBY/ON)
12. REMOTE SENSOR
13. CD OPEN/CLOSE
)
button:LPC-LM345A/X model only] buttons.
?
) button
TAPE MODE button
11. POWER
(/) buttons
EJECT)
COUNTER RESET button
9.
?
PUSH
REPEAT button
SET/CD(
model
RECORD/RECORD PAUSE (
) button
TUNING/TIME(-/+), CD SKIP/SEARCH(-/+),
(
FM MODE/RIF button
(
CD
OPEN)
button
14. CLOCK button
button
Bottom Panel
Rear Panel
15
16
18
17
19
20
20. VOLTAGE SELECTOR
15. FM ANTENNA
:
OPTIONAL
16. BATTERY COMPARTMENT
17. MICPHONE SOCKET
-
18. HEADPHONE SOCKET
-
(OPTIONAL)
PHONES)
3.5mm.
(
3.5mm.
19. AC POWER INPUT SOCKET
5
Remote Control
Control
TUNER/BAND button
POWER button
PRESET
/
(
)
MUTE button
buttons
VOLUME (
/
) buttons
CD FUNCTION buttons
PLAY/PAUSE
CD
(
STOP(
) button
) button
?
SLEEP button
?
CD SKIP/SEARCH
/
(
) button
REPEAT button
?
PROGRAM/MEMO button
?
TAPE FUNCTION buttons
OPTIONAL
?
?
?
EQUALIZER PATTERN
?
button
(EQ PATT.)
?
NUMBER buttons
?
RECORD/ RECORD PAUSE (
REVERSE PLAY
(
) button
) button
:
OPTIONAL
FORWARD PLAY (
) button
( ) button
TAPE STOP
FAST FORWARD
REWIND
(
(
) button
) button
UBB button
W indow
Display Window
1.
TAPE PLAY
?
(
/
)DIRECTION
indicators
(OPTIONAL)
?
TAPE PLAY MODE
(
) indicator
(OPTIONAL)
?
6
TAPE REPEAT indicator
(OPTIONAL)
2.
CD SYNCHRO RECORDING indicator
3.
STEREO indicator
4.
MEMORY indicator
5.
PROGRAM indicator
6.
TIMER indicator
7.
SLEEP indicator
8.
MP3 file indicator
9.
RECORD/ RECORD PAUSE indicator
10. CD PLAY/PAUSE indicator
11. UBB indicator
12. CD REPEAT indicator
13.
Equalizer indicator
Installation
2
The AC Power Cord
Cord Connection
Connection
1.
Installation
Battery
Unit
connecting the AC power cord, check
operating voltage of your unit is
identical with the voltage of your local power
supplied.
Before
that the
2.
Connect
one
(supplied)
end of the AC power cord
to the AC IN socket located at the
backside of your unit.
3.
Plug the other end into the wall outlet.
1.
Press and open the
2.
Put eight "C" (R14) batteries and four "AA"
(R6) batteries into the compartment making
sure
3.
Note
Unplug the AC power cord from the wall outlet if
you do not to use for an extended period of time.
the
battery
and
are
Replace the battery
cover.
Instal ion
correctly positioned.
cover.
Remote Control
1.
Detach the
battery
cover on
the
rear
of the
remote control.
Adjusting
the
voltage
(OPTIONAL)
voltage (OPTIONAL)
2.
If your unit is equipped with a voltage selector at
the bottom side, be sure to set it to your local
power
cord.
Insert two R03
and
(size AAA) batteries
with
aligned correctly.
supplied before connecting the AC power
3.
Replace the battery
cover.
Notes
?
To avoid
damage from possible battery
leakage,
remove
the batteries if you do not plan
period of time.
to use the unit for an extended
?
When the batteries
batteries with
?
are
weak, replace all the
new ones.
During the AC power cord
outlet, the batteries
are
connect to the wall
not worn out.
7
Sound
Sound
Adjustment
Volume
VOLUME
(
/
) buttons
MUTE button
Adjustment
Press VOLUME
,Remote control:
(Unit:
increase the sound level,
to
to decrease it.
(Unit:
,Remote control:
Sound
Quality Adjustment
You
choose between 4 fixed sound
can
)
press the VOLUME
or
)
impres-
sions.
Select
a
button
on
desired sound mode
by using EQ
PATT.
the remote control.
FLAT
:
ROCK
: more
POP
:
bass, more treble
less bass, less treble
CLASSIC
:
for orchestral music
linear
frequency response
MUTE
Press MUTE to mute your unit.
can mute your unit in order, for
OPTIONAL
You
example, to
telephone, "MUTE" indicator flashes
the display window.
answer
in
the
EQUALIZER
UBB
PATTERN
Repeatedly press UBB to select one of two
sound effect for emphasizing the bass sound.
(EQ PATT.)
button
-The UBB indicator will
light up.
Headphone Socket
Connect
a stereo headphone plug (
3.5mm) into
headphone jack.
The speakers are automatically disconnected
when you plug in the headphones (not supplied).
the
UBB button
Micphone Socket (OPTIONAL)
Connect
a micphone plug (
3.5mm) into the
micphone jack (not supplied).
8
3
Operation
Auto Function Selection
Selection
?
?
Using
Using
If you press CD PLAY/ PAUSE (
listen to the radio, CD playback will
) during
begin.
If you press PRESET (
/
) or TUNER/
BAND during CD or CASSETTE play, radio
Setting
Setting
1.
Sleep
Sleep
Function
When the
sleep timer is used, the power is automatically turned off after the specified time has
elapsed.
1.
function will work.
the
To
specify the time delay before the power is
turned off, press SLEEP.
In the display window you
the Clock
Clock
can see
90" for about 5 seconds. This
turns off
system
Press CLOCK.
"SLEEP
means
automatically after
that the
90 min-
utes.
(If the clock is requires setting, press and hold
CLOCK for more than 2 seconds.)
Each time the button is
pressed the time
by 10
interval before it turns off is reduced
minutes. i.e. 80...70... etc.
2.
Select
a
24 hour
cycle
or
12 hour
Select the desired time to turn off.
cycle by
2.
pressing TUNING/TIME (-/+).
To check the
remaining time
until the power
is turned off.
While the
sleep function is active press
briefly. The time remaining until it
off is displayed for about 5 seconds.
SLEEP
turns
(12HR)
or
(24HR)
Note
3.
If you press SLEEP while the sleep time is displayed, the SLEEP time is reset.
Press SET to confirm the selected hour
cycle.
To cancel the
4.
5.
6.
Use TUNING/TIME
(-/+)
to set the correct
hours.
Press SET.
is
Use TUNING/TIME
(-/+)
8.
You
Press SET and the correct time is shown
the
on
display.
Press CLOCK at any time to
for about 5 secound.
displayed.
Using
Using Microphone (OPTIONAL)
to set the correct
minutes.
7.
sleep timer mode
If you wish to stop the function, press the SLEEP
button repeatedly until "SLEEP 10" appears, and
then press SLEEP once again while "SLEEP 10"
can sing to a music source by connecting a
microphone to unit.
1. Connect your microphon (not supplied) to the
MIC socket.
display the time
2.
Play
3.
Sing along
a
music you want.
with the
accompaniment.
For your reference
You
can
record
Refer to the
during using microphone.
"Recording" explanation section.
9
imer
Timer
?
This function is
automatically turned
on
and off
5.
Set the hour to switch
?
Select your desired radio station, press CD
button and load a disc or press TAPE button
and insert a TAPE.
6.
Press SET to confirm the hour to switch
7.
1.
Set the minute to switch
Press CLOCK to check the current time.
For your reference
If you don't set clock, timer function doesn't
work.
2.
by pressing
on
TUNING/TIME (-/+).
at the time you want.
on
on.
by pressing
TUNING/TIME (-/+).
8.
Press SET to confirm the minute to switch
on.
"OFF" indicator appears for about 0.5
seconds in the display window and then
Press TIMER to enter the timer
setting mode.
disappears.
TUN-CD-TAPE flashes in the display window
in turn.
9.
Set the hour to switch off
For your reference
If you want to correct the
-
memorized TIMER
the TIMER button
-
The
previous
setting, press and hold
more
than 2 seconds.
previous memorized timer
on
time
and TIMER indicators appear in the dis
play window.
3.
Press SET when the desired function is
flashing.
4.
1. a. When you select the
TUNER(TUN)
function, "PLAY" and "REC" indicator
flash in the
by pressing
TUNING/TIME (-/+).
display window alternately
for about 3 seconds.
10. Press SET
to confirm the hour to switch off.
11 Set the minute
.
to switch off
by pressing
TUNING/TIME (-/+).
12. Press SET.
13. Adjust the volume level by pressing
TUNING/TIME (-/+).
14. Press SET.
"TIMER" appears in the display window and
setting has been completed.
the timer
"PLAY" indicator
:
"REC" indicator
:
TUNER
play only
play and
recording
TUNER
b. Press SET when the desired function is
flashing.
Select the
c.
previous memorized preset
(-/+) button
number with TUNING/TIME
-
switched
To cancel
on
or
check the timer
Each time the TIMER button is
seconds in the
the timer
display window and then
function,
"ON" indicator appears for about 0.5
seconds in the display window and then
disappears.
automatically
and off at the time set.
select the timer set
2. When you select the CD or TAPE
10
The selected function is
and press SET.
"ON" indicator appears for about 0.5
disappears.
-
15. Switch the system off.
setting
so
pressed you
cancel. You
can
can
also check
status.
check the timer, press the TIMER
that "TIMER" appears in the display
To activate
button
or
or
window.
To cancel the TIMER, press the TIMER button so
disappears in the display window.
that "TIMER"
Presetting
You
can
Before
the Radio Stations
Stations
Listening
preset 50 stations for FM and AM.
tuning, make
1.
to the Radio
Press TUNER/BAND to select the
frequency
that you have turned
down the volume to the minimum.
(FM or AM) you want.
Every time you press this button,
changes alternately.
1.
The last received station is tuned in.
sure
Press TUNER/BAND to select the
(FM or AM) you want.
Every time you press this button,
changes alternately.
frequency
FM and AM
2.
FM and AM
Press PRESET
:
(-/+: unit) or PRESET ( /
control) repeatedly to select the pre-
remote
set station you want.
2.
Select
a
station you want
by pressing TUNING/
-
(-/+) buttons.
Tuning in manually
-
Press TUNING/TIME
3. Adjust the volume by VOLUME (
(-/+) briefly and
repeatedly.
Tuning in automatically
-
Press TUNING/TIME
seconds.
(-/+) for
unit
Scanning stops when the
?
A
on
or
buttons
repeatedly.
the front
panel.
preset number will flash in the display window.
Press PRESET
(
/
(-/+:unit)
control)
:remote
or
PRESET
to select the
non-preset radio stations
or automatic tuning in step 2.
For automatic tuning, press and hold TUNING/TIME (-/+) on the front panel.
To turn off the radio
or
POWER(STANDBY/ON)
For your reference
If an FM program is
?
Press PROGRAM/MEMORY
Press MODE/RIF
1
Repeat steps
(or 2)
to 5 to store other
noisy
so
recording the MW(AM) broadcast, beat
occur.
If it
does, press MODE/RIF
once.
on
the
panel for about two seconds, "DEL" flash
the display window and then press CLEAR
again, the stations are deleted.
-
in
For your reference
If all stations have already been entered, FULL
message will appear in the display window for a
preset number will flash. To
change the preset number, follow the steps 4-5.
moment and then a
?
"kHz" flash in the
Adjust the
-
display window.
antenna to
get
more
clear
reception.
AM antenna
This antenna is built within the unit and rotate
the unit for better
-
reception.
FM antenna
Pull the telescopic antenna out and adjust the
angle and direction for better reception.
presets
Press and hold PRESET
(
When
noises may
front
/
TAPE).
effect.
?
To delete all the memorized stations
To recall
or
pears in the
stations.
Press and hold PROGRAM/MEMORY
(CD
that "STEREO" disapdisplay window. There will be no
stereo effect, but the reception will improve.
Press MODE/RIF again to restore the stereo
again.
The station is stored.
6.
to turn the unit off
select another function mode
preset
number you want.
5.
:unit)
control)
Use manual
Press
4.
/
:remote
/
To listen to
?
Press PROGRAM/MEMORY
VOLUME (
buttons
than 1
more
tunes in a stations.
3.
Each time you press the button, the unit
preset station at a time.
tunes in one
TIME
:remote
control)
number appears
or
(-/+:unit)
or
PRESET
until the desired
press it
preset
repeatedly.
11
Tape Playback
Tape
Note: Use
Basic
1.
Tape Recording
Tape
only normal tapes during playback.
Wind the tape to the point recording starts.
Note: Use only normal tapes.
Playback
Press TAPE to select tape function.
("NO TAPE" appears in the display window.)
2.
Open the cassette door by pushing
PUSH EJECT) position.
(
3.
Insert
a
Basic
TAPE DOOR
Press TAPE PLAY
( ) [or TAPE REVERSE
): LPC-LM345A/X model only] button.
(
To
Open
or
To
STOP(
Play
or
Deck
:
Fast Forward
After auto stop deck
LPC-LM340A/X model
plays only front side, the
Recording
1.
Press
You
:
"
stops
LPC-LM345A/X model
select direction of the cassette you want
pressing TAPE MODE.
can
Pressing
only
After the cassette
Once
Twice
Three times
plays front
(backward play)
side, stops automatically.
2.
Press
(
)
or
PLAY(
The
"
To
CD to
during
playback.
-
-
-
The local repeat ending
"TP A-b" appears in the
1.
2.
STOP(
).
Press CD SYNC in stop mode.
REC" flashes and "CD SYNC"
in
The
synchronized recording is started
automatically after about 8 seconds.
If you wish to record from the desired track,
select the desired track with CD SKIP/
SEARCH (-/+) before commencing CD synchro
Note
12
displays
display window.
Notes
?
This function repeats three.
If you set local within 3 seconds (after
repeat starting point), is not operated.
panel
synchro recording function dubs a
complete CD and programmed titles automatically into a cassette.
playback.
point is set.
display window.
the front
Tape Synchronized Recording
the
TAPE
on
stop recording
Press TAPE
The CD
-The local repeat starting point is set.
2. Press REPEAT button once during TAPE
)
recording
) during recording.
REC" flashes in display window.
-
Repeat (OPTIONAL)
1. Press REPEAT button
the
recording begins.
"
Local
or
To pause
Press (
automatically.
side, stops automatically.
panel
the remote control.
After the cassette plays
front and reverse side, stops
reverse
CD
or
the front
REC" flashes and holds the cassette in
or
or reverse
After the cassette plays six
times repeatedly front and
on
pause mode.
by
Function
Display
)
TUNER function.
only
unit
from Radio
(
remote control and then select the CD or
automatically.
Auto Reverse Deck
blank
recording direction (LPC-LM345A/X
only)
Press TAPE MODE repeatedly to set the
recording direction.
/
pressing (
) on the front panel
/
(
) on the remote control during playback,
stop, press PLAY(
) at the point you want.
Stop
a
compartment.
model
After
Auto
BAND)
To set the
) during playback.
Rewind
TUNER/
the cassette deck and insert
PLAY
Stop Play
Press
or
(CD
you want to record.
2.
cassette and close the TAPE.
Recording
Select the function
cassette into the cassette
4.
or
1.
setting the local
recording.
?
The function
recording.
change is
not
possible during
CD
CD
Program Play
Playback
Basic
You
can arrange the order of the tracks on the discs
and create your own program.
The program can contain up to 20 tracks.
Playback
1.
Press CD button to select CD function.
2.
Press CD OPEN/CLOSE
CD
(
OPEN)
to open
the disc compartment.
3.
Load
disc with the
a
will be
display.
Press PLAY
(
playing time
button(
:unit) or
control) button to begin play.
:remote
Pause
Playback
PAUSE( :unit) or CD PLAY/PAUSE (
control) button to pause during playback.
Press CD PLAY/ PAUSE button again to resume
play.
:remote
(
:unit) or CD STOP (
control) button during playback.
a
Track
Press CD SKIP/SEARCH
?
(+) button
to go to the
Repeat
5.
Press PLAY
next track.
(-) button is pressed
once midway through a track, the player returns to
the start of that track. When it is pressed again, a
track is skipped each time the button is pressed.
Searching
a
Track
pressing and holding CD SKIP/ SEARCH (-/+)
button during playback, then release at the point you
After
want.
Notes
This function is not available to
play
a
MP3 file.
play
one
track
1.
2~3.
(
:remote
:unit) or CD
control).
PLAY/ PAUSE
Press CD SKIP/SEARCH
(-/+) buttons
4.
Repeat
5.
Press PLAY
(
to select
file.
Press PROGRAM/MEMORY (unit) or
PROGRAM/MEMO (remote control).
2~3.
(
:remote
:unit) or CD
control).
PLAY/ PAUSE
To check program contents
Press PROGRAM/MEMORY (unit) or
PROGRAM/MEMO (remote control) on
the stop mode.
-Track and program number will be
displayed.
To clear program contents
Press PROGRAM/MEMORY (unit) or
PROGRAM/MEMO (remote control) on the stop
mode. And then press STOP/CLEAR (
:unit) or CD
STOP (
:remote control) button
.
once
during playback.
display.
play all tracks repeatedly
again during playback.
"REPEAT ALL" appears in the display.
To cancel repeat play
Press REPEAT button
2.
To
1.
once more
Press PROGRAM/MEMORY
(unit)
or
PROGRAM/MEMO (remote control) repeatedly
on the program stop mode until Track Number
blinks.
Press REPEAT button
-
or
3.
"REPEAT 1" appears in the
To
-
(unit)
Press PROGRAM/MEMORY (unit) or PROGRAM/MEMO (remote control) on the stop
mode.
a
1.
repeatedly
Press REPEAT button
-
to select
To add program contents
Repeat
To
the stop
Program Play (MP3 File)
When CD SKIP/SEARCH
?
on
(-/+) buttons
Press PROGRAM/MEMORY
4.
Press STOP/CLEAR
Skipping
or
PROGRAM/MEMO (remote control).
2.
Stop Playback
:remote
Press CD SKIP/SEARCH
(
Press CD
(unit)
the track.
3.
CD PLAY/PAUSE
Press PROGRAM/MEMORY
PROGRAM/MEMO (remote control)
mode.
2.
Close the disc compartment.
4.
1.
printed side facing up and
The total track number and
shown in the
Program Play (Audio CD)
during playback.
Repeat
2~5on above.
modify program
contents
Press the PROGRAM/MEMORY (unit)
PROGRAM/MEMO (remote control) to
program number you want to
Repeat indicator disappears.
2.
Repeat
or
display
modify.
2~4on above.
13
Maintenance
4
the Unit
Unit
Shipping
Shipping
Cleaning
Cleaning
original shipping carton and packing materiin handy. For maximum protection,
re-pack the unit as it was originally packed at the
factory if you need to ship it.
soft, dry cloth when cleaning the player. If
The
Use
als
the surfaces
can come
a
the Unit
Unit
are
lightly moistened
Never
zine,
use
extremely dirty, use a soft cloth
with a mild detergent solution.
strong solvents, such
alcohol, ben-
as
paint thinner. These might damage the
or
surface of the unit.
Do not
use
volatile
liquids, such
insecticide
as
spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long
period of time. They
will leave marks
on
the
sur-
face.
T roubleshooting
Troubleshooting
Symptom
Cause
Correction
No power.
?
The power cord is disconnected.
?
No sound.
?
The power of the external
equipment is switched off.
?
The unit does not
start
playback.
?
?
No disc
An
or
source
?
The disc is
?
The disc is not
or
Switch
on
the external
source
equipment.
tape is inserted.
unplayable disc
Plug the power cord into the wall
outlet securely.
tape is inserted.
placed upside down.
?
Insert
a
disc
?
Insert
a
playable disc
?
or
tape.
or
Place the disc with the
tape.
playback side
down.
placed
within the
guide.
?
Place the disc
on
the disc tray
correctly inside the guide.
The remote
con-
trol does not
work
?
The disc is
?
The remote control is not
properly.
dirty.
?
pointed
at the
?
remote sensor of the unit.
?
Point the remote control at the
remote sensor of the unit.
The remote control is too far from the
?
unit.
?
Clean the disc.
Operate
the remote control
within about 23 ft
There is
an
obstacle in the
path of the
(7 m).
?
Remove the obstacle.
?
Replace the batteries
remote control and the unit.
?
The batteries in the remote
control
14
are
exhausted.
with
new ones.
Reference
5
Remote Control
Control
Operation
Operation Range
Point the remote control at the remote
Distance: About 23 ft
(7 m) from the front of the
remote sensor.
sensor
Angle: About
and press the buttons.
the remote
30° in each direction of the front of
sensor.
Specifications
Specifications
MODEL
SECTION
[Genral]
[CD]
[Tuner]
AM F(MMW)
[TAPE]
LPC-LM340A/X
LPC-LM345A/X
Power
supply
Refer to the back
Power
consumption
13W
Mass
unit.
3.24kg
External dimensions
Output
panel of the
(W
x
H
x
Power
D)
360
170
x
x
260
mm
2.5WX2
Speakers
8ΩX2
Battery Operation
DC 12V, 8
Frequency response
100
Signal-to-noise ratio
59 dB
T.H.D
0.7 %
-
"C"(R14)
"AA"(R6)batteries (not supplied)
MHz, 87.5 -108 MHz
Tuning Range
65 -74
Intermediate
10.7 MHz
Frequency
and 4
18000 Hz
or
87.5 -108 MHz
Antenna
Telescopic
Tuning Range
522-1611kHzor530-1610kHz
Intermediate
450 kHz
Frequency
antenna
Antenna
Ferrite bar antenna
Recording System
4 Tracks 2 channel stereo
Frequency Response
125
Signal
to Noise Ratio
Designs and specifications
are
subject
-
8000Hz
40/45dB
to
(REC/PLAY)
change without notice.
15
P/NO
:
3834RC0024R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement