LG | LPC14 | Owner's Manual | LG LPC14 Owner’s Manual

LG LPC14 Owner’s Manual
ENGLISH
PORTUGUÊS
Portable CD Cassette
Recorder
FRANÇAIS
OWNER'S MANUAL
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LPC14 (LPC14)
P/NO : MFL61543981
LPC14_LGEMAR-Cover-ENG.indd 1
2010.1.5 11:20:5 AM
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 2
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case
or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions. Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from over
heating. The openings be never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an
authorized service center. Use of controls, adjustments or the performance of
procedures other than those specified herein may result in hazardous radiation
exposure. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no
additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or damaged or cracked
wire insulation are dangerous. Any of these conditions could result in electric shock
or fire. Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the appliance, and
have the cord replaced with an exact replacement part by an authorized service.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing
the product, ensure that the plug is easily accessible.
The marking of the apparatus Refer to the bottom panel of the unit.
This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible
threat to human and animal health, the old battery or the battery put it in the
appropriate container at designated collection points. Do not dispose of batteries or
battery together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop where
you purchased the product.
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative:
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 3
In NIGERIA
POWER: This unit operates on a mains supply of 200-240V, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp.
When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use
this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer.
If the type of plug supplied is not suitable for the mains sockets in your home, then the plug
should be removed and a suitable type fitted. Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this DVD player must be destroyed.
A mains plug with bared wires is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either
in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this
DVD player may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows: The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which is coloured brown must
be connected to the terminal which is marked with the letter L or coloured red.
CONTENTS
Power Source
3
Main Unit
Listening to the Radio
4
4
Listening to CDs
5
Using a USB device
6
Listening to music from your portable player
6
Listening to cassette tapes
7
Recording to TAPE
7
8
8
Specifications
2
1
1
Battery Installation
1. Press and open the battery cover.
2. Put six “C” (R14) batteries (not supplied) into the compartment making sure
the 3 and # should be correctly positioned.
3. Replace the battery cover.
2
PAGE
Troubleshooting
Power Source
AC Power Cord Connection
1. Connect one end of the AC power cord (included) to the AC IN socket
located at the backside of your unit.
2. Plug the other end into the wall outlet.
Note:
• Unplug the AC power cord from the wall outlet if you do not to use for an
extended period of time.
• To avoid damage from possible battery leakage, remove the batteries if
you do not plan to use the unit for an extended period of time.
• When the batteries are weak, replace all the batteries with new ones.
• While the AC power cord connect to the wall outlet, the batteries are not
worn out.
• Batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
3
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 4
Main Unit
Listening to the Radio
ON UNIT
7
1
8
2
1. Select the radio function
2. Select either FM or AM
FUNCTION switch
9
3
4
10
5
11
3. Select the radio station
(FM or AM)
BAND switch
TUNING dial
Listening to the radio - More you can do
To turn off the radio
6
Set FUNCTION switch to TAPE or CD - USB (OFF), PORT. IN to turn off your
unit.
12 13
1
USB connector
2
PORT.IN connector
3
4
5
7
Z PUSH OPEN
You can use it when inserting or
removing CDs.
VOLUME Control
8
ANTENNA
FM AM BAND switch
You can choose AM or FM
9
TUNING DIAL
10
FREQUENCY indicator
FUNCTION switch
[CD - USB,TUNER, PORT. IN,
TAPE]
6
CD-USB FUNCTION buttons
• + 10
• x STOP
• B [] PLAY/PAUSE
• . BACKWARD
SKIP/ SEARCH
• > FORWARD
SKIP/ SEARCH
• PROG.
• REPEAT
4
11
•
•
•
•
•
TAPE FUNCTION buttons
X
Pausing
/Z
x/
Stop/ Eject
m/M
Searching
b
Playing
z
Recording
12
DISPLAY WINDOW
13
TAPE DOOR
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 5
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
ON UNIT
1. Select the CD function
2. Open the CD door
3. Insert the CD : Label facing up.
4. Close the CD door
5. Start the CD playing
6. Stop a CD playing
FUNCTION switch
Z PUSH OPEN
B []
x
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press B[] on the unit during playback.
2 Press this button again to resume play.
Searching for a section within a track
Press and Hold ./> during playback and release it at the point you want
to listen to. (This function is only available for Audio CD’s.)
Skipping to another track (file)
• Press > to go to the next track (file).
• When the . is pressed once midway through a track (file), the player
returns to the beginning of that track (file). When it is pressed again, a track
is skipped each time the button is pressed.
• When you press +10, next 10 tracks (files) are skipped in a jump and the
next 10 th track (file) is played back.
Note:
Depending on the conditions of the recording equipment or the CD-R/RW disc
itself, some MULTI SESSION, Mixed disc cannot be played on the unit.
Creating your own playlist
You can play up to 40 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROG. in stop status.
3 Press ./> to select a track.
4 Press PROG. again to save and select a next track.
Repeat the step 3 - 4.
5 Press B[] to play the programmed music files.
6 To clear your selection, press x twice.
About MP3/ WMA
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 to 48 kHz (MP3), 32 to 48 kHz (WMA)
• Bit rate : 32 to 320 kbps (MP3), 40 to 320 kbps (WMA)
• CD-R physical format should be “ISO 9660/ JOLIET”
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3
files.
We recommend that you use “Easy-CD Creator”, which creates an ISO
9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• On CD or USB, 99 folders and 999 track, function are support
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT repeatedly.
Tracks will be played back repeatedly or randomly.
2 To return to normal playback, press REPEAT repeatedly to select.
5
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 6
Listening to music from your portable player
Using a USB device
You can enjoy media files saved on a USB device by connecting the
USB device to the USB port of the unit. If you want to operate other
function, see the “Listening to CDs” section.
ON UNIT
1. Connect the USB device to the USB port of
the unit.
-
FUNCTION switch
3. Select a file you want to play.
./>
4. Start your media playing.
B[]
5. Stop a media playing
x
FUNCTION switch
Compatible USB Devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0 or USB 1.1.
• The USB function may not be available depending on devices.
• Devices which require additional program installation when you have
connected it to a computer, are not supported.
Look out for the following
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minute to be
searched.
• To prevent data loss, back up all data.
• If you use a USB extension cable or USB hub, the USB device is not
recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.)
• This unit is not supported when the total number of files is 1000 or more.
• External HDD, Locked devices or hard type USB devices are not supported.
• USB port of the unit can not be connected to PC. This unit can not be used
as a storage device.
6
ON UNIT
1. Connect the portable player to the PORT. IN
connector of the unit.
-
2. Select the CD -USB function.
6. Before disconnecting the portable USB
device, change to any other function.
The unit can be used to play the music from many types of portable
player.
PORT. IN
2. Turn the power on.
3. Select the PORTABLE function.
4. Turn on the portable player and start it
playing.
FUNCTION switch
FUNCTION switch
-
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 7
Recording to TAPE
Listening to cassette tapes
ON UNIT
1. Select the TAPE function
2. Open the tape door
3. Insert the tape
4. Close the tape door
5. Start the tape playing
6. Stop a tape playing
Cassette deck will automatically stop at
the end of the tape
You can record a various sound sources to TAPE.
FUNCTION switch
x/Z
-
b
x/Z
ON UNIT
1. Open the tape door
2. Insert a blank tape
3. Close the tape door
4. Select a mode in which you want to record
5. Start the Recording
6. Stop a Recording
x/Z
-
FUNCTION switch
bz
x/Z
Synchronized Recording from CD to Tape
Listening to the cassette tapes - More you can do
Playing Fast backward or Forward
Press bb /BB on the unit during playback, or stop, press b (or x / Z ) at a
point you want.
Pausing or restart a tape
Press [] on the unit during playback. Press this button again to resume play.
ON UNIT
1. Open the tape door.
2. Insert a blank tape and close the door.
3. Select the CD function (Audio CD only)
4. Start the Recording:
The synchronized recording is started
automatically after about 7 seconds.
5. To stop recording, press
x/Z
FUNCTION switch
bz
x/Z
Note:
On recording, press [] to pause.
7
LPC14_LGEMAR-ENG
12/30/09
4:51 PM
Page 8
Specifications
Troubleshooting
Symptom
Cause
Correction
POWER
No power
The power cord is not
plugged in.
Plug in the power cord.
The batteries are not
remaining.
Change the batteries with a
new one.
RADIO
No sound
The function switch is not
set to the Radio mode.
Set the switch to the Radio
mode.
Some noise
occurs.
There are electronic
devices near the player.
Set the player far from the
devices.
An unplayable disc is
inserted.
Insert a playable disc.
The disc is placed upside
down.
Place the disc with the
playback side down.
The disc is not placed
within the guide.
Place the disc on the disc
tray correctly inside the
guide.
The disc is dirty.
Clean the disc.
Record protect tabs are
removed.
Cover holes on back edge
of tape with tap.
CD
The unit does
not start
playback
TAPE
Unable to
record
Designs and specifications are subject to change without notice.
8
General
Power supply
Power consumption
Net Weight
External dimensions (W x H x D)
Operating temperature
Operating humidity
Tuner
FM Tuning Range
AM Tuning Range
Refer to the main label
Refer to the main label
2.1 kg
(333 x 178 x 259) mm
5 oC to 35 oC
5 % to 85 %
88 to 108 MHz or 65 to 108 MHz
520 to 1610 kHz or 520 to 1710 kHz
CD
Frequency response
Signal-to-noise ratio
Dynamic range
100 Hz to 18 kHz
55 dB
55 dB
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
0.5 W x 2 ch
10 %
120 Hz to 18 kHz
50 dB
Speakers
Type
Impedance
Rated Input Power
Max. Input Power
2 Way 2 Speaker
8Ω
0.5 W
1.0 W
USB
Version
Bus Power supply
1.1
DC 5 V
500 mA
LPC14_LGEMAR-Cover-ENG.indd 2
2010.1.5 11:20:39 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising