LG LPX-M930A Owner's manual
SAKAL_LPX-M930/M935(ENG)-27N CD/RADIO CASSETTE RECORDER OWNER'S MANUAL MODEL: LPX-M930A/X/S LPX-M935A/X/S Please read this manual carefully before operating your set. Retain it for future reference. Designs and specifications are subject improvement. to without notice for CD-R/RW change Precautions CAUTION Use of controls CAUTION procedures RISK OF ELECTRIC or adjustments or performance of specified herein may other than those result in hazardous radiation exposure. SHOCK DO NOT OPEN Laser tion component in this product is capable exceeding the limit for Class 1. of radia- emitting CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION:INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. VARNING:OSYNLIG LASERSTRALNING DEL AR OPPNAD STRALEN AR FARLIG. Attention:Quand Explanation Graphical Symbols: The an lightning flash with equilateral triangle arrowhead within symbol, is intended to alert the to the presence of uninsulated product's enclosure that may be of suffimagnitude to constitute a risk of electric point is intended to alert the important operating instructions in the within user an l'appareil est ouvert, ne pas radiations invisibles du faisceau laser. This label is located shock to persons. The exclamation aux DENNA user dangerous voltage within the cient s'exposer NAR equilateral triangle to the presence of and maintenance(servicing) literature accompanying the appliance. on the interior. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER This Disc player is classified CLASS 1 LASER WARNING Compact product. TO REDUCE THE RISK OF FIRE OF ELECTRIC The CLASS 1 LASER PRODUCT label is located SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS- as a on the exterior. TURE. To avoid electrical icing to qualified shock, do not open the cabinet, Refer serv- Do not install this book personnel only. apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such vases, shall be placed on the apparatus. equipment in a confined space such a case or similar unit. The as Table of Contents INTRODUCTION Precautions/TableofContents................2 BeforeUse.................................3 SafetyPrecautions.........................3 NotesonDiscs............................3 NotesonTapes...........................3 FrontPanel................................4 RearPanel/DisplayWindow...................5 RemoteControl.............................5 OPERATION PowerSource...............................6 TheACPowerCordConnection..............6 BatteryInstallation.........................6 .6 Adjustingthevoltage(OPTIONAL). SpeakerConnection........................6 AudioAdjustment...........................7 VolumeAdjustment.........................7 UBB/EQAdjustment.......................7 SettingtheCLOCK...........................7 . . . . . . . . . . SLEEPFunction.............................7 SettingtheTIMER...........................8 OtherFunction..............................8 2 RadioOperation.............................9 Presettingtheradiostations..................9 Listeningtotheradio.......................9 TapeOperation..............................9 BasicPlayback............................9 ToPausePlay/ToStopPlay.................9 .9 ToPlayRewindorFastForward. ContinuousPlay...........................9 CD/MP3Operation..........................10 BasicPlayback...........................10 ToPausePlay...........................10 ToStopPlay.............................10 ToSkiptheTrack.........................10 . . . . . . . . . . . . ToSearchtheTrack.......................10 ToRepeatPlay...........................10 ToProgramPlay..........................10 Recording.................................11 BasicRecording..........................11 CDSynchronizedRecording................11 Specifications......................BackCover Before Use Safety Precautions shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. To discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the unit Handling When Cleaning the center out. keep the surface clean Do not near use volatile liquids, such as the unit. Do not leave rubber contact with the unit for leave marks Cleaning a insecticide spray, or long period plastic products in of time. They will the surface. on spray intended for the unit To clean the cabinet Use a soft, dry cloth. If the surfaces soft cloth use a lightly solution. Do not benzine, or are moistened with a extremely dirty, detergent as these as might damage alcohol, the surface on on records. Tapes Preventing record Removing the tab(s) of the cassette (with driver) will prevent accidental erasure. of the unit. Notes Notes analog mild strong solvents, such use thinner, Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static a small screw- Side A Discs Tab for side A Handling discs Do not touch the Hold the disc get on by playback side of the disc. edges so that fingerprints the will not Tab for side B the surface. Do not stick paper or tape on the disc. To record again, cover the hole of the tab with adhesive tape. Storing After discs playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct as there may be increase inside the car. sunlight, a Adhesive tape. considerable temperature 3 INTRODUC Front Panel LPX-M930A/X/S Model 18 1 17 2 16 15 14 3456789 13 12 11 910 LPX-M935A/X/S Model 18 1 17 2 16 15 14 3456789 13 12 11 910 1. REMOTE SENSOR 2. POWER 3. ? 4. (STANDBY/ON) MEMORY button ? PROG./SET button ? PRESET ) buttons )buttons / 6. HI-DUBBING 7. TAPE DOOR 8. ? ON/ ( OFF) (TAPE A DECK) CD PLAY/PAUSE ( ) button CD SKIP/SEARCH button 10. ? RECORD ( REC) ? 4 ( F.FWD) button TAPE STOP/TAPE DOOR OPEN ? TAPE PAUSE ST/EJ) button ( PAUSE) button PLAY DIRECTION ( DIR) (LPX-M935A/X/S model) ? TIMER button ? CLOCK button buttons 14. VOLUME (TAPE button ( / ) button B DECK) button FUNCTION SELECT TAPE) button ( PLAY ) (LPX-M935A/X/S model) ) 15. TAPE PLAY TAPE PLAY button 13. UBB button and indicator ( PLAY) button / ?PLAYMODE( )button (LPX-M935A/X/S model) ? REW) ? 12. TAPE DOOR / ( LEFT/RIGHT SPEAKER ( 11 .?MODE/RIF/REPEAT button ? ? FAST FORWARD ( 3.5mm) ?CDSTOP( )button TUNING (-/+) buttons 9. REWIND ? ? SOCKET MICROPHONE(MIC) ? ( / ( ?TIME( 5. button buttons or (TUNER/BAND, CD/MP3, indicator 16. DISPLAY WINDOW 17. CD DOOR OPEN 18. CD DOOR ( ) button Rear Panel/Display Window 1 891 011 12 13 TIMER OFF STEREO 7 MEMORY 2 TIMER ON MP3 INTRODUC 6 ROCK FLAT CLASSIC SYNCHRO SLEEP REPEAT 1 ALL 17 16 15 345 1. FM ANTENNA 10. MP3 indicator 2. SPEAKER RELEASE LEVER 11. TIMER ON indicator 3. BATTERY COMPARTMENT 12. TIMER OFF indicator 4. AC POWER INPUT SOCKET 13. STEREO indicator 5. VOLTAGE SELECTOR 14. EQUALIZER PATTERN 6. SPEAKER INPUT SOCKET (OPTIONAL) (FLAT, ROCK, CLASSIC, POP) (R/L) 14 POP indicator 15. REPEAT indicator 7. HEADPHONE SOCKET 8. CD PLAY/PAUSE indicator 16. SLEEP indicator 9. MEMORY indicator 17. CD SYNCHRO (OPTIONAL) recording indicator Remote Control 1. POWER button 11 1 10 2. PRESET / ( button ) 3. SLEEP button 2 3 789 4 4. CD FUNCTION buttons ? ?CDSTOP( ? 6 CD PLAY/PAUSE ( ) button )button CD SKIP/SEARCH ( / ) button 5. NUMBER buttons 6. CD REPEAT button 7. PROGRAM button 5 8. TUNER/BAND button 9. VOLUME ( / ) button 10. MUTE button 11. EQUALIZER (EQ) button 5 Power Source The AC Power Cord Connection connecting the AC power cord, check that the operating voltage of your unit is identical with the voltage of your local power supplied. 1 Connect 2 one (supplied) before end of the AC power cord to the AC IN socket located at the Plug the other end into the wall outlet. voltage (OPTIONAL) If your unit is equipped with a voltage selector at the back side, be sure to set it to your local power supplied the AC power cord. connecting ote ? backside of your unit. 3 the Adjusting Before ? "HELLO" indicator will be shown in the (Press it again Speaker to turn Unplug the AC power cord from the wall outlet if you use for an extended period of time. do not to Battery when 1 2 Position the ribs off.) Connection To attach the ote display you connect the AC power cord to the wall outlet. Press POWER to turn the main unit on. on speaker speaker guide slots with the guide the unit. Gently push the speaker downwards until the speaker release lever automatically locks the speaker into place. Installation UNIT Press and open the 1 2 battery cover. Put eight "D" (R20) type batteries and four "AA" (R6) type batteries into the compartment making sure the and are correctly positioned. Replace 3 the battery cover. 3 Plug the right and left speaker leads "R" speaker socket and "L" speaker into the socket located at the backside of your main unit. 1 1 2 2 Remote Control Press and open the 1 2 3 Put two "AAA" battery cover. (R03) batteries into the To detach the compartment. Replace the battery 1 2 cover. Unplug the Press the speaker speaker leads. speaker release lever and slide the speaker up. 2 ote ? 1 To avoid remove for ? an the batteries if extended period When the batteries with ? from damage unit of time. weak, replace all the batteries new ones. During the AC power cord connect to the wall outlet, the batteries 6 are possible battery leakage, you do not plan to use the are not worn out. Audio Volume Adjustment Adjustment Press VOLUME (Unit: Remote control: UBB / EQ ) Remote control: , ) to increase the sound level, or press the VOLUME (Unit: , to decrease it. Adjustment UBB Repeatedly press UBB to emphasize the bass sound. "UBB ON" indicator appears in the display window. To cancel it, press this button again. "UBB OFF" indicator appears in the display window. EQ Repeatedly press EQUALIZER (EQ) [Remote control] to select one of four sound effect (FLAT, ROCK, CLAS- SIC, POP). The EQ indicator will be shown in the Press CLOCK. (If the clock is CLOCK for 2. Select a pressing requires setting, press more than 2 seconds.) 12 hour TIME control: cycle (unit: or / and hold 24 hour ) or cycle by PRESET (remote /) buttons. (12HR) 3 window. the CLOCK Setting 1 display (24HR) or Press SET to confirm the selected hour 4 5 6. 7 8 Use TIME trol: (unit: /) / ) or PRESET (remote con- to set the correct hours. Press SET. Use TIME trol: (unit: /) / ) or PRESET (remote Press SET and the correct time is shown the con- to set the correct minutes. on display. Press CLOCK at any time to for about 5 seconds. display the time cycle. SLEEP Function When the 1 To sleep specify timer is used, the power is the time delay automatically before the power is turned off, press SLEEP. In the display window you for about 5 seconds. This turns off automatically can see "SLEEP 90" that the system after 90 minutes. Each time the button is means pressed the time interval by 10 minutes. i.e. before it turns off is reduced 80...70... etc. Select the desired time to turn off. turned off after the 2 specified To check the time has remaining elapsed. time until the power is turned off. While the sleep function is active briefly. The time remaining until it played for about 5 seconds. press SLEEP turns off is dis- ote If you press SLEEP while the the SLEEP time is reset. To cancel the sleep sleep time is displayed, timer mode If you wish to stop the function, press the SLEEP button repeatedly until "SLEEP 10" appears, and then press SLEEP once again while "SLEEP 10" is displayed. 7 OPERATION the TIMER Setting ? This function is ? Select your desired radio station automatically turned or on and off at the time you want. press CD and load a disc. Press CLOCK to check the current time. 1 For your reference If you don't set clock, timer function doesn't work. Press TIMER to enter the timer 2 mode. setting "TIMER ON" appears in the display window. "TUN-CD" flash in the display window in turn. The previous memorized timer TIMER indicators appear in the on time and "TIMER ON" appears in the display window. (If you select "TUNA", select a station you want TIME ( / 4 5 by ). Set the hour to switch on by pressing the minute 10 Set (/). 11 Adjust the 12 TIME( ). 13 volume level / Set the minute to switch / TIME( on on. by pressing ). Press SET to confirm the minute to switch "TIMER OFF" appears in the window. by pressing TIME by pressing Switch the system off. The selected function is automatically switched on and off at the time set. To cancel setting Press SET to confirm the hour to switch to switch off or check the timer Each time the TIMER button is pressed you can select the timer set or cancel. You can also check the timer TIME (/). 6 7 Press SET to confirm the hour to switch off. 14 flashing. pressing by pressing ). Press SET. "TIMER ON TIMER OFF" appears in the display window and the timer setting has been completed. display) Press SET when the desired function is 3 / TIME( Press SET. you want to correct the previous memorized TIMER setting, press and hold the TIMER button more than 2second (If - Set the hour to switch off 8 9 status. To activate or check the timer, press the TIMER button so that "TIMER ON TIMER OFF" appears in the display window. To cancel the TIMER, press the TIMER button so that "TIMER ON TIMER OFF" disappears in the display window. on. display ote The unit can also set the clock function in power off state. Other Function Headphone Socket (optional) ? Connect ? The a stereo DUBBING headphone plug ( 3.5mm) into the headphone jack. speakers are automatically disconnected you plug in the headphones (not supplied). when 1 Using Microphone You sing to a music source by connecting microphone ( 3.5mm) to the unit. can Connect your microphone (not MICROPHONE (MIC) SOCKET. 1 2 3 Sing along a a supplied) music you want. Play with the For your reference can record during accompaniment. using microphone. "Recording" explanation section. ?You can't record with microphone during normal speed or double speed dubbing. 8 to the 2 3 4 To ?You - This function shows how to record from tape to tape at normal speed or double speed. Refer to the Insert a playback tape and insert a blank to dub into TAPE B DECK tape into TAPE A DECK. Press HI DUBBING select normal Press TAPE PAUSE ( REC) ON/ ( speed or ( double PAUSE) OFF) button speed. and RECORD of TAPE A DECK. Press TAPE PLAY [ PLAY (LPX-M935A/X/S model)] of or PLAY TAPE B DECK. stop dubbing, press TAPE STOP ( TAPE A and B DECK. to /ST) of Radio You can Operation 50 stations for preset FM, AM (MW) and SW (OPTIONAL). Before tuning, make Press TUNER/BAND 1 To recall the radio stations Presetting (unit or control) remote to select radio function. Each time this button is the FM, Select AM(MW) pressed, you can (OPTIONAL). station you want buttons. 2 (- / +) Tuning select and SW a sure by pressing TUNING in manually (- / +) briefly and repeatedly. Tuning in automatically Press TUNING (- / +) for more than 1 second. Scanning stops when the unit tunes in a stations. Press TUNING that you have turned down the volume to the minimum. presets Press PRESET ( / ) [unit] or PRESET ( / [remote control] until the desired preset number or press it repeatedly. Listening 1 2 Follow ) appears OPERATION to the radio 1-2 as left side. steps Adjust the volume by pressing VOLUME ( / ) / buttons [unit] or VOLUME ( ) [remote control]. - Press MEMORY. 3 A preset number will flash in the display window. To turn off the radio Press POWER (STANDBY/ON) to turn the unit off select another function mode (CD, TAPE). Press PRESET ( / ) on the unit or PRESET ( / ) on the remote control to select the preset number you want. 4 Press MEMORY 5 6 For your reference ? 1 again. (or 2) If FM stereo broadcast is an Press MODE/RIF/REPEAT noisy that "STEREO" so pears in the display window., but the improve. Press MODE/RIF/REPEAT The station is stored. Repeat steps or to 5 to store other disapreception will again to restore the stereo effect. stations. ote To delete all the memorized stations Press and hold MEMORY on the front panel for about display window and seconds, "DEL" appears in the then press MEMORY again, the stations two ? more clear reception. AM antenna This antenna is built within the unit and rotate the unit for better deleted. are the antenna to get Adjust ? reception. FM antenna Pull the telescopic antenna out and and direction for better adjust the angle reception. Tape Operation Basic 1 2 tape function. "TAPE" appears in the window. display the cassette door Open DOOR OPEN Insert 3 Continuous Playback Press TAPE button to select a by pressing ST/EJ) button. ( [ PLAY or (LPX-M935A/X/S model)] button. To PLAY Play ( PAUSE) button to pause. again to resume play. Play ST/EJ) button ( or to stop play. Fast Forward pressing REWIND/ FAST FORWARD ( REW/ F.FWD) button during playback, press TAPE PLAY [ PLAY or PLAY (LPX-M935A/X/S model)] at the point you want. or press TAPE PLAY TAPE B DECK. playback played automatically. AUTO STOP (LPX-M930A/X/S model) plays only front side, the unit stops automatically. After auto stop deck AUTO REVERSE (LPX-M935A/X/S model) Both sides of a cassette at the end of the change Press DIR Rewind (LPX-M935A/X/S model) After the cassette in the deck A is finished To Stop Play Press TAPE STOP To Play cassette into each deck and set to the cassette in deck B is Press TAPE PAUSE Press the button a by pressing PLAY MODE and then PLAY ) and PAUSE ( PAUSE) of ( - cassette and close the TAPE door and then press TAPE PLAY To Pause TAPE Insert To select tape the After playback side during playback. play direction by pressing Both sides of a automatically at the end of ?Settothe - played and stops automatically continuously. are button ?Settothe - or Both sides of cassette PLAY MODE. are by pressing a cassette played and stopped tape. are PLAY MODE. played continuously. 9 , CD/MP3 Basic 1 Operation Playback Press CD/MP3 button to select CD/MP3 func- To Program Play tion. You can Press CD DOOR OPEN 2 compartment. 3 close the disc Load a disc with the side printed be shown in the the : display up and playing time will window. The total number of files will be shown in window. display Press CD PLAY/PAUSE 4 facing compartment. Audio CD: The total track number MP3 CD disc ()to open the ) button ( begin to play. To Pause Play Press CD PLAY/PAUSE ) button ( to pause during playback. When a track is paused, " Press CD PLAY/PAUSE " ( will appear in the display. ) button again to resume play. To Press CD STOP ? Skip ) button during playback. ( ) button ( ( midway through a to go ) button is track, the player returns to the start of that track. When it is pressed again, a track button is pressed. is skipped pressing and holding CD SKIP/SEARCH (/) button during playback, then release at the point you want. After ote To To a MP3 file. Repeat Play play one track repeatedly Press MODE/RIF/REPEAT button button - (remote control) To play all tracks (unit) or REPEAT during playback. the display. once "REPEAT 1" appears in repeatedly Press MODE/RIF/REPEAT button button - (remote control) To cancel (unit) or REPEAT again during playback. the display. button "REPEAT ALL" appears in repeat play Press MODE/RIF/REPEAT button button (remote control) button back. - Repeat 10 indicator disappears. (unit) once more or ) Press PROG./SET Repeat 1~3. Press CD PLAY/PAUSE Press PROG./SET ( ). on the stop mode. The track and program number will be displayed. on the stop mode. REPEAT during play- ( ). To add program contents 1. Press PROG./SET repeatedly on the program stop mode until track number blinks. 2~5as above. 2. Repeat To modify program 1. Press the PROG./SET to you want to play / ( To check program contents each time the To Search the Track This function is not available to the stop mode. Press CD SKIP/SEARCH And then press CD STOP When CD SKIP/SEARCH once on buttons to select the track. Press PROG./SET the Track Press CD SKIP/SEARCH pressed Press PROG./SET To clear program contents to the next track. ? 1 2 3 4 5 - Stop Play To arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks. 2. Repeat contents display program number modify. 2~4as above. ote In addition, this unit can contains audio titles. play a CD-R or CD-RW that Recording Wind the tape to the Basic 1 2 3 point recording starts. normal Recording Select a function (TUNER or CD/MP3) you wish tapes.) 3 - the cassette TAPE A and insert Open Press RECORD - cassette into the cassette a blank The synchronized recording cally after about 7 seconds. To pause TAPE PLAY Press TAPE PAUSE ( REC) button. PLAY) button is pressed PAUSE CD/MP3 TUNER 4 CD Synchronized Recording playing your automatically programmed records or (RADIO). an selection of tracks onto entire CD a or function. a display is started automati- To ( PAUSE) ( PAUSE) again button button. Press TAPE to resume recording. stop recording (Your cassette the tape.) ( /ST) button. automatically stop deck will at the end of cassette. Press CD/MP3 button to select the CD/MP3 Load the deck A recording Press TAPE STOP This feature on compartment. Press RECORD ( automatically. REC) button ( "SYNCHRO" indicator will be shown in the window. to record. Start 1 2 (Use only disc and insert the blank cassette into deck A ote If you wish to record from the desired track, select the desired track with CD SKIP/SEARCH ( /) button before commencing CD recording. If you wish to record a programmed selection of tracks, program them now 11 OPERATION Specifications Power Power External dimensions [CD] FM SW AM (OPTINAL)(MW [TAPE] Designs P/NO : panel of the unit. 30W Mass [Genral] [Tuner] Refer to the back supply consumption (W x H x D) Approx. 5.6kg Approx. 283.2 x 231.6 x 247.8 mm Output Power Speakers Battery Operation Frequency response Signal-to-noise ratio 5WX2 T.H.D 0.7 % Tuning Range Intermediate Frequency 65 -74 Antenna Telescopic Tuning Range Intermediate Frequency 522-1611kHzor530-1610kHz 3.2ΩX2 DC 12V, 100 - eight "D"(R20) batteries 60 dB MHz, 87.5 -108 MHz 450 kHz Ferrite bar antenna 5800 -18000kHz Antenna Telescopic Recording System Frequency Response Signal to Noise Ratio 4 Tracks 2 channel stereo specifications 3834RC0027N subject 87.5 -108 MHz antenna Tuning Range Intermediate Frequency are or 10.7 MHz Antenna and (not supplied) 18000 Hz 450 kHz 125 - 8000Hz 40/45dB to change antenna (REC/PLAY) without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project