LG | XA63-A0U | LG XA63-A0U Owner’s Manual

XA63_ENG_MFL41698412
MODEL : XA63 (XA63-A0U, XAS63F)
ENGLISH
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable
operation of the product and to protect it from over heating. The openings should be
never be blocked by placing the product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instruction has been
adhered to.
CAUTION:
This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Should the unit require maintenance, contact an authorized
service center. Use of controls, adjustments or the performance of procedures other than
those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
2
CAUTION: The apparatus should not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, should be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
POWER: This unit operates on a mains supply of 200-240V, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused
at 5 amp. When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA
approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If the type of plug supplied is not suitable for the
mains sockets in your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must be
destroyed. A mains plug with bared wires is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth
symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at the distribution
board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead
of this unit may not correspond with the coloured marking identifying the terminals in
your plug, proceed as follows: The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal which is marked with the letter L
or coloured red.
There is so much your Hi-Fi system can do
ENGLISH
Contents
About player
About remote control
Setting up
Listening to the radio
Listening to CDs
Listening to music from your portable player
Playing music using USB
Recording
Setting the Clock
Use your player as an alarm clock
Fall asleep while listening to your player
Sound quality adjustment
VSM (Virtual Sound Matrix)
About MP3/WMA
Troubleshooting
Specifications
4
5
6
7
8
8
9
9
10
10
10
10
10
10
11
11
The making of unauthorized copies of copy-protected material,
including computer programs, files, broadcasts and sound
recordings, may be an infringement of copyrights and constitute
a criminal offence. This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Before connecting, operating or adjusting this product, please read this instruction booklet carefully
and completely.
3
About player
DISPLAY WINDOW
1/]]
Press 1/]] for longer than 3 seconds as the
device is powered on, you can move into
POWER SAVE MODE.
DISC TRAY
VOLUME
Control the volume when using any function.
CLOCK
For setting the clock and checking the time.
(see Setting the Clock)
PHONES (Headphone jack)
Connect a headphone plug ( 3.5 mm) into the
jack to listen to the sound through headphones.
Connecting headphones (not supplied) will
switch off the speakers.
PORT.IN
The player can be used to play the music from
many types of portable player.
TIMER
With the TIMER function you can turn CD play
and radio reception on or off at a desired time.
(see Use your player as an alarm clock)
4
eXtreme Dynamic Sound System
Reinforce the treble, bass and surround sound
effect. XDSS ON will show in the display. Press
again for NORMAL.
OPTIMIZER
Optimizes compressible MP3 files so that it
improves the bass sound.
(XDSS ON → MP3 - OPT ON → NORMAL)
To change the functions
Change the functions among FM, AM, CD,
USB, PORTABLE.
Z OPEN/CLOSE
You can use it when inserting or removing CDs.
MO./ST.
This will change the tuner from stereo to mono
and usually improve the reception.
Select the radio station
USB Rec.
Record FM, AM, Audio CD or PORTABLE
source to USB.
DEMO
Press DEMO in power off state to demonstrate
the function on display window.
Press again to cancel.
USB connector
Connect a remote USB compatible player
here.
SET (RDS-OPTIONAL)
Confirms the time you have selected when
setting the clock. (see Setting the clock)
About remote control
Sound quality adjustment
You can choose sound impressions.
Turn on or off
Search for a folder of MP3/WMA files
When a CD containing MP3/WMA files in several
folders is being played, press PRESET/FOLDER
to select the folder you want to play.
Choose a ‘preset number’ for a radio
station (see Listening to the radio)
Listen to your tracks again and again
Press MODE repeatedly, the display changes in
the following order, RPT 1 - RPT ALL - RANDOM
- OFF.
Fall asleep while listening to your player
Firstly, start a radio station or music. Press
SLEEP one or more times to select delay time
between 10 and 180 minutes, after the player will
turn off.
Dimm the display light
For storing radio stations
If you have saved radio stations using
PROGRAM/MEMO, you can scroll through them
and select one. (see Listening to the radio)
Listen to your tracks in any order
(see Listening to the CDs)
To change the functions
Change the functions among FM, AM, CD.
VSM (Virtual Sound Matrix)
You can select the Virtual sound.
Temporarily stop the sound
Press the button again to return to the sound.
Control the volume when using any function.
To change the INPUT functions
Change the functions among USB, PORTABLE.
Stops playback or recording
See information about your music
MP3/WMA files often come with tags. The tag
gives the Title, Artist, Album or Time information.
Press INFO while a file is playing to see this
information.
Select the radio station
Starts or pauses recording
Starts or pauses playback
Search radio stations by radio type
- OPTIONAL
5
Setting up
1 Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus). Cables from the righthand speaker are connected to the terminal marked R (right)
+ (plus) and - (minus).
To connect the cable to the player, press each of the four
square plastic finger pads on the rear of the player.
The connector will open ready to receive a cable.
Put the battery in the remote control
3
#
Make sure that the + (plus) and - (minus) on the
battery (size AAA) match those on the remote
control.
2 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
3 Connect the FM aerial
The reception will be at its best when the two loose
ends of the aerial are in a straight line and horizontal.
4 Plug the power plug into a wall socket
6
See information about your radio stations - OPTIONAL
Listening to the radio
Make sure both the FM and AM aerials are connected.
1. Select either FM or AM:
2. Select the radio station:
ON PLAYER
ON REMOTE
FUNC.
TUNING (-)/
TUNING (+)
FUNCTION
TUN.- / TUN.+
3. To ‘save’ a radio station:
A preset number will show in the
display.
4. To select a ‘saved’ station:
5. To confirm press: Up to 50 radio
stations can be saved.
PROGRAM/
MEMO
PRESET/FOLDER
PROGRAM/
MEMO
The FM tuner is supplied with the Radio Data System (RDS) facility. This
shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS on the remote control several times to
view the information.
PTY - Programme Type, such as News, Sport, Jazz.
RT - Radio Text, the name of the radio station.
CT - Time Control, the time at the location of the radio station.
PS - Programme Service name, the name of channel.
You can search the radio stations by programme type by pressing RDS.
The display will show the last PTY in use. Press PTY one or more times to
select your preferred programme type. Press and hold ./> (.bb/
BB>). The tuner will search automatically. When a station is found the
search will stop.
Listening to the radio - more you can do
Look for radio stations automatically
Press TUNING (-)/TUNING (+) on the player or TUN.- /TUN.+ on the
remote control for more than 0.5 second. The tuner will scan automatically
and stop when it finds a radio station.
Choose a ‘preset number’ for a radio station
Select a station you want by pressing TUNING (-)/TUNING (+) on the player or TUN.- /TUN.+ on the remote control. Press PROGRAM/MEMO, the
station flashes. Press PRESET/FOLDER on the remote control to select the
preset number you want. Press PROGRAM/MEMO to save it.
Delete all the saved stations
Press and hold PROGRAM/MEMO on the remote control for two seconds.
“ERASE ALL” shows. Press PROGRAM/MEMO to erase all the saved stations.
Improve poor FM reception
Press MO./ST. du lecteur ou sur la touche B/[] de la télécommande. This
will change the tuner from stereo to mono and usually improve the reception.
7
Listening to CDs
Listening to music from your
portable player
Audio CD and MP3/WMA CD can be played back in this player.
ON PLAYER
1. Open the CD door:
2. Insert the CD: Label facing up.
3. Close the CD door: The display
will show the total number of
tracks (files).
4. Select the CD function:
5. Start the CD playing:
6. To stop a CD playing:
ON REMOTE
Z OPEN/CLOSE
Z OPEN/CLOSE
FUNC.
FUNCTION
B/[]
x
B/[]
x
Listening to CDs - more you can do
Pause or restart a CD
Press B/[] during playback. Press this button again to resume play.
Search for a section within a track
Hold ./> on the player or .bb/BB> on the remote control
during playback.
Speed search for tracks
Hold ./> on the player or .bb/BB> on the remote control only
in stop status. Track skips continuously in turn.
Skip to another track
Press ./> on the player or .bb/BB> on the remote control.
Listen to your tracks in any order
Up to 20 tracks on a CD can be listened to in the order of your choice.
Insert a CD and wait for it to be read. Press PROGRAM/MEMO on the
remote control, then use .bb/BB> to select the track. Press PROGRAM/MEMO again to save and select the next track. Press B/[]. To clear
your selection, press x twice .
8
The player can be used to play the music from many types of portable
player.
1. Connect the portable player by
plugging the unit into PORT. IN on
the front of the player.
2. Turn the power on:
3. Select the PORTABLE function:
4. Turn the portable player on and
start it playing:
ON PLAYER
ON REMOTE
1 /]]
FUNC.
POWER
INPUT
Playing music using USB
Recording
The advantage of connecting your portable USB player through the
system’s USB port is that the portable device can be controlled from the
system.
1. Connect the portable player to
the system using a USB cable
(not supplied):
2. Select the USB function: The display will show READ, followed by
the number of files displayed.
3. Start the USB playing:
4. To stop a USB playing:
5. Before disconnecting the
portable USB player, change to
any other function by pressing:
6. Remove the USB player:
ON PLAYER
ON REMOTE
FUNC.
INPUT
B/[]
x
FUNC.
B/[]
x
FUNCTION
or
INPUT
Record FM, AM or PORTABLE source to USB
Connect USB to the player before recording.
1. Select a mode (FM, AM or
PORTABLE) in which you want
to record:
2. Start the Recording:
3. To stop a Recording:
ON PLAYER
ON REMOTE
FUNC.
USB Rec.
FUNCTION
or
INPUT
REC
x
x
Record Audio CD source to USB
NOTES :
• Some portable devices are not compatible with this system.
• When various cards are connected to the Memory Card Reader, the first
detected card is recognized.
• Do not extract the USB device in operating.
• A back up demands to prevent a data damage.
• If you use a USB extension cable or USB hub, the USB device might not
be recognized.
• A device using NTFS file system is not supported (Only the FAT (16/32)
file system is supported.).
• The USB function of this unit does not support all USB devices.
• Digital camera and mobile phones are not supported.
• This unit is not supported when the total number of files is 1000 or more.
You can record one desired track or all of the music tracks in Audio CD
to USB.
1. Select the CD function:
2. Select the track:
3. Start the Recording:
4. To stop a Recording:
ON PLAYER
ON REMOTE
FUNC.
./>
USB Rec.
FUNCTION
.bb/BB>
REC
x
x
NOTES :
• Remove USB while recording, the recorded file may not be saved.
• Press USB Rec. on the player or REC on the remote control for longer
than 3 seconds, you can select bit rate. Press ./> (.bb/
BB>) to select the bit rate and USB Rec. or REC again to select the
recording speed. Press ./> (.bb/BB>) to select a desired
recording speed and USB Rec. or REC again to finish recording.
1 x speed : You can listen to music while recording it.
(FM, AM, PORTABLE or Audio CD)
2 x speed (Only 96kbps, 128kbps)
: You can just recording the music file. (Only Audio CD)
9
Fall asleep while listening to your player
Setting the Clock
ON PLAYER
1. Press for at least 2 seconds:
2. Choose from either: AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display)
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:
CLOCK
./>
SET
./>
SET
./>
SET
Use your player as an alarm clock
Press and hold TIMER on the player for two seconds. Each function,
TUNER, CD, USB flashes for two seconds. Press SET on the player when
the function you want to be woken by is showing.
If you choose TUNER you will be shown the stations you have saved as
presets. Use ./> on the player to select the station you want, then
press SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use ./> on the player to change the hours
and minutes and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use ./> on the player to change
the hours and minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use ./> on the player to change the volume and SET to save. Switch
the system off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps as initially.
10
Press SLEEP on the remote control one or more times to select delay time
between 10 and 180 minutes, after the player will turn off. Press SLEEP on
the remote control repeatedly, the display changes in the following order,
corresponding icons & dimmer ON → SLEEP 180 (dimmer ON) → SLEEP
150 (dimmer ON) → SLEEP 120 (dimmer ON) → SLEEP 90 (dimmer ON)
→ SLEEP 80 (dimmer ON) → SLEEP 70 (dimmer ON) → SLEEP 60 (dimmer ON) → SLEEP 50 (dimmer ON) → SLEEP 40 (dimmer ON) → SLEEP
30 (dimmer ON) → SLEEP 20 (dimmer ON) → SLEEP 10 (dimmer ON) →
SLEEP OFF & (dimmer OFF).
Sound quality adjustment
You can choose sound impressions. Press EQ on the remote control
repeatedly, the display changes in the following order, NORMAL →
NATURAL → ARABIC → AUTO -- EQ (Only MP3/WMA file) → POP →
CLASSIC → ROCK → JAZZ.
VSM (Virtual Sound Matrix)
You can select the Virtual sound. Press VSM on the remote control to set
the virtual sound.
• ON STAGE : The sound fills Concert hall
• VIRTUAL : Realtime 3D positioned sound rendering technology with
stereo sources, optimized for stereo speakers. Listeners may experience
amazing virtual surround effects with their own multimedia players.
About MP3/WMA
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate : 8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660”
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example “Direct-CD” etc., it is impossible to playback
MP3 files. We recommend that you use “Easy-CD Creator”, which creates
an ISO 9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
Troubleshooting
Symptom
Specifications
Cause
Correction
General
No power.
The power cord is not plugged in.
Check whether electricity failed.
No sound.
Check whether you select right
function.
Plug in the power cord.
Check the condition by operating
other electronic devices.
Press FUNC. (FUNCTION/INPUT)
and check the selected function.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
CD
The unit does not
start playback.
RADIO
Radio stations
The antenna is positioned or
cannot be tuned in. connected poorly.
Connect the antenna securely.
Remote control
The remote control The remote control is too far from
does not work
the unit.
properly.
There is an obstacle in the path of
the remote control and the unit.
The battery in the remote control is
exhausted.
Operate the remote control within
about 23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
General
Power supply
Power consumption
Net Weight
External dimensions (WxHxD)
Operating temperature
Operating humidity
Tuner
FM Tuning Range
Refer to main label.
Refer to main label.
2.9 kg
170 x 240 x 260 mm
5 oC to 35 oC
5% to 85 %
AM Tuning Range
87.5 - 108.0 MHz or 65 - 74 MHz,
87.5 - 108.0 MHz
522 - 1620 kHz or 520 - 1720 kHz
Amplifier
Output Power
T.H.D
Frequency Response
Signal-to-noise ratio
30 W + 30 W
0.5 %
40 - 20000 Hz
75 dB
CD
Frequency response
Signal-to-noise ratio
Dynamic range
40 - 20000 Hz
75 dB
75 dB
Speakers (XAS63F)
Type
Impedance
Frequency Response
Sound Pressure Level
Rated Input Power
Max. Input Power
Net Dimensions (WxHxD)
Net Weight (1EA)
1 Way 1 Speaker
4Ω
80 - 15000 Hz
85 dB/W (1m)
30 W
60 W
150 x 242 x 170 mm
1.55 kg
Designs and specifications are subject to change without notice.
11
P/NO : MFL41698412
Download PDF