LG | 62SX4R | LG 62SX4R Owner’s Manual

DLP
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
and quote this
information to your dealer when you require service.
Model number
:
Serial number
:
on
the back
cover
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Rear panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
8
On screen menus
Menu selection
9
STATION MENU
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite Programme
Calling the programme table
10
PICTURE MENU
15
PSM(Picture Status Memory)
(Excellent Digital) / CSM (Color Starus Memory)
Manual Colour Temperature Control (User option)
sRGB (RGB[PC], HDMI[PC] mode only)
ACM (Active Color Management)
Manual Picture Control (User option)
SOUND MENU
SSM (Sound Status Memory) / BBE
AVL (Auto Volume Leveler) / Balance adjustment
Equalizer (option) / Sound output selection
Stereo/Dual reception / NICAM reception
19
TIME MENU
Clock / On/Off Timer
Auto sleep / Sleep timer
23
SPECIAL MENU
Child Lock /
25
Demo
SCREEN MENU
Auto Configuration (RGB [PC] mode only)
Manual Configuration (RGB [PC] mode only)
Setting Picture Format / Cinema
NR (Noise Reduction)
Initializing (Reset
original factory value)
PIP/DW MENU
Main Picture Source Selection
30
Picture in picture (PIP) function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture position change
Adjusting PIP Transparency (PIP mode only)
31
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT
Special teletext functions
33
Connection of PC
PC in socket
36
Connection of external equipment
Aerial socket
Audio/Video input sockets (option)
S-Video / Audio input sockets (option)
Monitor output sockets / DVD input sockets
DTV input sockets / HDMI
37
Replacing
the
Lamp
Troubleshooting
2
to
26
check list
41
43
Installation
Power
This set
supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
operates
on an
AC mains
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
moisture.
Do not place
cause a
fire
or
of the set, this may
anything containing liquid on top
or could give an electric shock.
Service
Never
the back
of the set
this
expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.
remove
cover
as
can
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid
of
having a fixed image remain on the screen for a long period
time. Typically a frozen still picture from a VCR, 4:3 picture for-
mat
or
if
the fixed
a
CH label is
image
present;
may remain visible
on
the
screen.
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
MULTIMEDIA
INPUT
1
POWER
2
DVD
TV
3
VCR
MODE
ARC
PSM
4
SSM
5
Remote control handset
Before you use the remote control
teries. See the next page.
1
INPUT
selects the remote operating mode.
switches the set on from standby.
2.
POWER
switches the set
TEXT
MENU
6
EXIT
OK
VOL
8
PIPPR+
MUTE
SWAP
FAV
PIPINPUT
PR
on
from
3.
PSM (Picture Status
recalls your preferred
4.
ARC
5.
VCR BUTTONS
7
PIPPR-
handset, please install the bat-
6.
7.
9
standby
or
off to
standby.
Memory)
picture setting.
(Aspect Ratio Control)
changes the picture format.
control
a
video cassette recorder.
MENU
selects
a menu.
PIP BUTTONS
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
10
LIST
SIZE
Q.VIEW
adjusts
11
SIZE
POSITION
INDEX
the sub
POSITION
STILL
Moves the sub
TIME
REVEAL
MIX
?
I/II
PIP
MODE
M
8.
SLEEP
12
picture
picture
size.
to D / E or F / G direction.
VOL D / E (Volume Up/Down)
Increases/decreases sound level.
PR D / E (Programme
Selects a programme.
9.
MUTE
switches the sound
Up/Down)
on or
off.
10. LIST
displays
the programme table.
11. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
12. I/II
selects the language during dual
selects the sound output.
4
language
broadcast.
Location and function of controls
13. MULTIMEDIA
selects
Component 1/2, RGB
HDMI modes.
or
14. MODE
MULTIMEDIA
INPUT
Selects another device.
13
POWER
15. SSM (Sound Status Memory)
recalls your preferred sound setting.
DVD
TV
VCR
MODE
14
ARC
PSM
SSM
15
16. EXIT
Clears all
on-screen
displays
and returns to TV
viewing
from any
menu.
TEXT
MENU
17. OK
accepts your selection
or
displays
OK
Adjusts
menu
settings.
Selects
menu
item.
18. FAV
a
PIPPR-
favorite programme.
19. NUMBER BUTTONS
switches the set
on
VOL
from
standby
16
the current mode.
D/EorF/G
selects
EXIT
or
directly
select
a
PIPPR+
MUTE
17
SWAP
FAV
PIPINPUT
PR
number.
18
20. Q.VIEW
returns to the
previously
21. STILL
freezes motion of the
viewed programme.
19
picture.
LIST
22. SLEEP
sets the
sleep
timer.
SIZE
Q.VIEW
POSITION
INDEX
20
STILL
21
Note : In teletext mode, the PR
used for teletext function.
+
/
-,
SWAP and INPUT buttons
TIME
are
REVEAL
MIX
?
I/II
PIP
MODE
M
SLEEP
22
Battery
installation
The remote control handset is
powered by
two AA
type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the
polarity symbols (
+
and
-
)
marked inside the
compartment.
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
Lamp indicator, operation indicator, and temperature indicator, located side the
reveal the operating status of the DLP(Digital Light Processing) projection TV.
*
To
*
do not press the
high quality
of the
front panel controls
sound,
*
speakers.
MAIN POWER
INPUT
MENU
OK
MUTE
INPUT Button
VOL
(ON/OFF)
PR
F / G
(Volume
Down/Up)
MENU Button
E / D
Operation Indicator/
Lamp Indicator/
Temperature Indicator
(Programme Down/Up)
OK Button
MUTE Button
?Status Indicators
Operation
Indicator
Off
Power cord is not connected
Red
Power Cord is
Green
On
White
(loading)
Orange
Red
Lamp
(flashing)
Projection lamp
Indicator
Red
(flashing)
Red
Contact
an
The
life
lamp
is
in
reaching
replaced
problem
After
(flashing)
on
standby.
standby.
with
the end of its life and
a new
with the
lamp
lamp.
or
around it.
authorized service center.
over.
cover
is not closed.
The set has shut down due to
Indicator
Red
6
a
Lamp
Green
Temperature
There is
power switch is off
connected, unit is
Preparing operation
needs to be
or
viewing
the
The set has shut
phrase
overheating.
"Thermal
High
Error"
down, check the cooling fan.
Location and function of controls
Rear
panel
(R)
AUDIO
AV3 INPUT
SOCKET
(L)/
MONO
VIDEO
S-VIDEO
AV3
INPUT
COPONENT
PUT2
PUT1
40/40p/
5/5p
70p1080i
MOITOR
OUT
A2
PUT
I
A1
PUT
I
P/DTV
(S G/
480p/
57p/
IDEO
S
70p
1080i)
IDEO
MONO
()
ADO
R)
RGBIPUT
PGPO
RR
A T
D
L)
ADO
R)
E
480i40p/
575p
70p/080
Y
PB
PR
S-VIDEO
INPUT
SOCKET
L)
ADIO
R)
RGBIPT
DVI/
PUT
DMI
UPGRADE PORT
This
upgrade
port is used
the software
to
ver-
sion and
debug
changing
the hardware.
Be careful not to
without
use
this
port. Just
dealer
or
COMPONENT
contact your
service centre.
MONITOR
AV2
AV1
OUT
INPUT
INPUT
PC/DTV
(XGA/
480p/
576p/
720p/
1080i)
S-VIDEO
AV1/AV2 / MONITOR
OUT (AUDIO/VIDEO),
S-VIDEO INPUT
SOCKETS
HDMI/DVI
INPUT 2
INPUT 1
480i/480p/
576i/576p/
720p/1080i
480i/480p/
576i/576p/
720p/1080i
Y
PB
DTV/DVD
INPUT
PR
VIDEO
U
MONO
(L)
AUDIO
(R)
P P
G O
R R
A T
D
RGB INPUT
(L)
AUDIO
(R)
(L)
AUDIO
(R)
E
DVI / RGB INPUT
HDMI/DVI
AERIAL
SOCKET
RGB INPUT
7
Basic
Operation
On and off
Before turning the set on, be sure that the main power switch
on the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, PR D / E,
INPUT, MULTIMEDIA or NUMBER button on the remote control handset to turn it on fully. The LED will load white for a while
and then lit up green when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
1.
2.
INPUT
MULTIMEDIA
POWER
3.
DVD
VCR
SSM
OK
VOL
PR
MUTE
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control handset.
b.
Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 20 to 40 seconds for sufficient cooling.
d.
When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 30 to
50 seconds for sufficient cooling.
e.
Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound from
the set.
Programme
selection
You can select
BER buttons.
a
Volume
programme number with the PR D / E
or
NUM-
adjustment
Press the VOL F / G button to
adjust
the volume.
Q.VIEW
Quick view
SIZE
POSITION
INDEX
HOLD
Press the Q.VIEW button to view the last programme you
were
watching.
I/II
PIP
SLEEP
Mute function
Press the MUTE button. The sound is switched off and the
display
Mute
appears.
You can cancel it
by pressing
the
MUTE, VOLF
/
G, SSM, I/II but-
ton.
On
screen
language
selection
The menu can be displayed
First select your language.
1.
2.
on
the
(option)
screen
in desired
language.
Press the MENU button and then D / E button to select the
SPECIAL menu.
Press the G button and then the D
/ E button to select
Language.
3.
4.
5.
Press the G button and then the D / E button to select your
desired language.
Press the OK or F button.
All the on screen displays will appear in the selected language.
Repeatedly press the MENU button to return to normal TV
viewing.
8
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
Press the MENU button and then D / E button to
2.
Press the G button and then the D / E button to select
3.
Repeatedly
Note :
a.
On
some
display
each
a menu
press the MENU button to return to normal TV
menu.
item.
viewing.
models, the Language will not be display.
STATION G
Auto programme
STATION
PSM
PICTURE G
CSM
Manual programme
PICTURE
Programme
edit
Favourite programme
ACM
SOUND
SOUND
TIME
TIME
SPECIAL
SPECIAL
SCREEN
SCREEN
PIP/DW
PIP/DW
STATION
STATION
STATION
PICTURE
PIP
50
Sharpness
60
Balance
SOUND
Win.
position
PIP
menu
Transparency
PIP
System
G
0
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
Colour
AVL
Input
Win. size
SPECIAL
50
BBE
PIP
TIME
Brightness
SSM
DW
SOUND
95
PICTURE
menu
Input
PICTURE
Contrast
SCREEN
PIP/DW
G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
SOUND
menu
STATION
Clock
Child lock
config.
PICTURE
ARC
STATION
Language
Off time
Demo
PICTURE
On time
Cinema
SOUND
Auto
SOUND
SOUND
TIME
TIME
SPECIAL
SPECIAL G
SPECIAL
SCREEN G
SCREEN
SCREEN
PIP/DW
PIP/DW
PIP/DW
TIME
NR
Reset
SCREEN
menu
SPECIAL
menu
menu
sleep
G
TIME
menu
9
STATION MENU
be stored in this set by programme numbers (0 to 99). Once you have preset the stations, you will be able
to use the D / E or NUMBER buttons to scan the stations you pro-
Up
STATION G
Auto programme
Manual programme
PICTURE
Programme
edit
Favourite programme
SOUND
to 100 TV stations
grammed.
Stations
can
be tuned
TIME
Note
SPECIAL
can
:
In
some
automatic
using
manual modes.
or
models up to 200 TV stations
can
be stored.
SCREEN
Auto programme
PIP/DW
All stations that
can
tuning
be received
ommended that you
use
are
stored
auto programme
by this method. It
during installation
is
rec-
of this
set.
INPUT
MULTIMEDIA
Press the MENU button and then D
STATION menu.
2.
Press the G button and then D / E button to select Auto pro-
POWER
DVD
VCR
SSM
/ E button to select the
1.
gramme.
3.
Press the G button to select
the F
/ G
Select
System.
a
TV
system with
button;
STATION
Auto programme
G
Manual programme
PICTURE
MENU
Programme
edit
Favourite programme
System
Storage
BG
from
2
Start
SOUND
TIME
SPECIAL
OK
SCREEN
PIP/DW
VOL
PR
MUTE
4.
5.
6.
Menu
Prev.
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the E button to select Storage from. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from menu.
Press the E button to select Start.
Press the G button to begin auto programming.
To stop auto programming, press the MENU button.
Q.VIEW
STATION
SIZE
POSITION
INDEX
Auto programme
Manual programme
HOLD
PICTURE
Programme
edit
Favourite programme
System
Storage
PIP
2
Auto programme
TIME
SLEEP
from
Start
SOUND
I/II
BG
-----
SPECIAL
16
M
23%
SCREEN
Menu
PIP/DW
When auto
viewing.
10
Prev.
completed, the Programme edit
screen. See the 'Programme Edit' section
programming
is
appears on the
to edit the stored programme.
Repeatedly press the MENU button to return to normal TV
menu
7.
Stop
STATION MENU
Manual programme
tuning
STATION G
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
Auto programme
PICTURE
Programme
edit
Favourite programme
SOUND
with five characters to each programme number.
TIME
SPECIAL
1.
STATION
2.
/ E
Press the MENU button and then D
button to select the
SCREEN
PIP/DW
menu.
Press the G button and then D
/ E
button to select Manual
programme.
STATION
Auto programme
Manual programme
PICTURE
Programme
Storage
2
System
BG
G
edit
Band
Favourite programme
INPUT
MULTIMEDIA
POWER
V/UHF
SOUND
Channel
1
DVD
TIME
Fine
SPECIAL
Search
VCR
SSM
Name
SCREEN
PIP/DW
3.
C01
Press the G button to select
Storage.
F
number
with
the
programme
on the Storage menu.
4.
Press the E button to select
the F
5.
BG
:
I
:
DK
:
M
:
/ G
/ G
button
Select the
or
MENU
NUMBER buttons
Select
System.
beginning
a
TV
system
OK
with
button;
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Press the E button to select Band. Press the F
select
6.
Off
Booster
Prev.
Menu
V/UHF
or
Cable
as
VOL
/ G
PR
MUTE
button to
required.
Press the E button to select Channel. Select the desired
channel number with the F
/ G
button
number under 10 is entered with
or
NUMBER buttons.
Any
it, i.e.
'05' for 5. If possible, select the channel number(U/VHF:1 to 69,
Press the E button to select Search. Press the F
commence
8.
searching.
button
or
a
/ G
button to
station is found the search will
one
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
stop.
required,
NUMBER buttons.
Press the OK button to store it.
10. To store another
11.
If
Q.VIEW
press the G button to select
Select the desired programme number with the F / G
If this station is the
Storage.
9.
numeric '0' in front of
with the number buttons.
Cable:1~47)directly
7.
a
Repeatedly
viewing.
station, repeat steps 4
to 9.
press the MENU button to return to normal TV
11
STATION MENU
STATION G
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
Auto programme
Manual programme
PICTURE
Programme
edit
Favourite programme
2.
3.
SOUND
TIME
4.
SPECIAL
SCREEN
5.
6.
PIP/DW
1 to 2.
Press the E button to select Name.
Press the G button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the next position by pressing the G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
INPUT
MULTIMEDIA
POWER
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
DVD
VCR
SSM
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 2.
Press the E button to select Booster.
Press the F / G button to select On or Off.
Repeatedly press the MENU button to return to normal TV
Repeat
viewing.
OK
Fine
tuning
Normally
VOL
PR
MUTE
1.
2.
fine
tuning
is
only
necessary if
reception
the 'Manual programme tuning'
Press the E button to select Fine.
Repeat
STATION
Auto programme
Manual programme
PICTURE
Programme
steps
Storage
2
System
BG
is poor.
1 to 2.
G
edit
Favourite programme
Band
V/UHF
SOUND
Channel
TIME
Fine
SPECIAL
Search
Name
SCREEN
1
FG
C01
Q.VIEW
PIP/DW
SIZE
POSITION
INDEX
PIP
SLEEP
Menu
Prev.
4.
5.
Press the F / G button to fine tune for the best picture and
sound.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
12
Off
HOLD
3.
I/II
Booster
be indicated
by yellow
number
STATION MENU
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
STATION G
Manual programme
PICTURE
0-
-
-
-
-
edit
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
edit
5C05
1BLN2
6C07
2C01
7C55
3C04
8S27
4C05
9S29
Delete
Copy
Move
Skip
Menu
Programme
Favourite programme
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D
button to select
/ E
Programme edit.
Press the G button to display the Programme edit menu.
Programme
Auto programme
INPUT
MULTIMEDIA
POWER
DVD
VCR
Prev.
SSM
Deleting a programme
1. SelectaprogrammetobedeletedwiththeD/EorF/Gbutton.
2.
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
all the
following
MENU
pro-
OK
Copying a programme
1. SelectaprogrammetobecopiedwiththeD/EorF/Gbutton.
2.
3.
Press the GREEN button.
Move the programme to the desired programme number with the
D/EorF/Gbutton.
4.
VOL
PR
MUTE
Press the GREEN button again to move the programme.
All the following programmes are shifted down one position.
Moving a programme
1. SelectaprogrammetobemovedwiththeD/EorF/Gbutton.
2.
3.
Press the YELLOW button.
Move the programme to the desired programme number with the
D/EorF/Gbutton.
4.
Press the YELLOW button
Skipping
1.
2.
3.
a
again
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
to release this function.
programme number
programme number to be
Select a
skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly
press the MENU button to return to normal TV
viewing.
13
STATION MENU
Favourite
STATION G
Programme
This function lets you select your favourite programmes
Auto programme
directly.
Manual programme
PICTURE
Programme
1.
edit
Favourite programme
SOUND
2.
TIME
Press the MENU button and then use D / E button to select the
STATION menu.
Press the G button and then D / E button to select Favourite
programme.
SPECIAL
3.
SCREEN
Press the G button to
PIP/DW
display
STATION
the Favourite programme
menu.
Auto programme
Manual programme
PICTURE
Programme
edit
Favourite programme
0BLN2
G
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SOUND
TIME
SPECIAL
INPUT
MULTIMEDIA
SCREEN
POWER
PIP/DW
Menu
Prev.
DVD
VCR
SSM
4.
5.
6.
MENU
7.
8.
Press the G button and then D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
OK
Repeatedly
press the FAV button to select stored favorite pro-
grammes.
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
VOL
MUTE
FAV
PR
Displaying programme
by displaying
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Note
:
0-
LIST
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
menu.
-
-
-
-
5C05
1BLN2
6C07
2C01
7C55
3C04
8S27
4C05
9S29
HOLD
a.
b.
You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
Select a programme with the D / E or F / G button.
The set switches to the chosen programme number.
Selecting
a
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV
14
viewing.
PICTURE MENU
PSM
1.
2.
(Picture Status Memory)
Press the MENU button and then D
TURE menu.
Press the G button and then D
/ E
/ E
button to select the PIC-
STATION
PSM
PICTURE G
CSM
ACM
SOUND
button to select PSM.
TIME
SPECIAL
STATION
G
PSM
TIME
SPECIAL
Brightness
50
Colour
50
Sharpness
60
SCREEN
CSM
Mild
ACM
SOUND
95
Dynamic
Standard
PICTURE
Contrast
Contrast
95
Brightness
50
Colour
50
Sharpness
60
PIP/DW
User
SCREEN
PIP/DW
Menu
Prev.
INPUT
3.
4.
5.
Press the G button and then D / E button to select
ting on the PSM pull-down menu.
Press the OK
Repeatedly
viewing.
or
a
picture
MULTIMEDIA
POWER
set-
DVD
VCR
F button.
press the MENU button to return to normal TV
preferred setting, press the PSM button until the
(Dynamic, Standard, Mild or User) appears.
The picture Dynamic, Standard and Mild are programmed for
good picture reproduction at the factory and cannot be changed.
To recall your
desired picture
SSM
PSM
MENU
OK
(Excellent Digital)
-
You
can
Reality
enjoy
the vivid and
high-definition picture
with
Digital
technology.
When selecting picture options (Dynamic, Standard and
Mild) in PICTURE menu, XD is automatically changed to On.
-It's not available to use this function in RGB[PC], HDMI[PC]
processor
-
VOL
PR
MUTE
mode.
1.
2.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select XD.
STATION
TIME
SPECIAL
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
CSM
On
Off
ACM
SOUND
Q.VIEW
PSM
G
PICTURE
LIST
Contrast
95
Brightness
50
Colour
50
Sharpness
60
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
15
PICTURE MENU
CSM
STATION
(Color Status Memory)
PSM
-
PICTURE G
CSM
ACM
SOUND
TIME
SPECIAL
Contrast
95
Brightness
50
Colour
50
Sharpness
60
When
selecting picture options (Dynamic, Standard and
Mild) in PICTURE menu, CSM is automatically changed to
Normal.
-I t 's not available to
use
this function in sRGB On mode.
SCREEN
1.
Press the MENU button and then D
TURE menu.
/ E
2.
Press the G button and then D
button to select CSM.
PIP/DW
INPUT
STATION
PSM
PICTURE
CSM
MULTIMEDIA
SOUND
TIME
DVD
VCR
SPECIAL
PIP/DW
3.
Press the G
4.
Press the OK
5.
Repeatedly
viewing.
OK
PR
Brightness
50
Colour
50
Sharpness
60
Warm
User
Menu
Red
0
Green
0
Blue
0
Prev.
use
or
F button.
press the MENU button to return to normal TV
Temperature Control (User option)
1.
Press the MENU button and then D
PICTURE menu.
2.
Press the G button and then D
STATION
PSM
PICTURE
CSM
G
SOUND
TIME
SPECIAL
Q.VIEW
SIZE
POSITION
INDEX
HOLD
3.
I/II
PIP
SLEEP
95
Brightness
50
Colour
50
Sharpness
60
Cool
Warm
User
4.
5.
6.
Red
0
Green
0
Blue
0
Prev.
Press the G button and then D
Press the G button and then F
adjustments.
The adjustment
button to select User.
G button to make appropriate
/ E
/
range of Red, Green and Blue is -30~+30.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
16
Contrast
Menu
button to select the
Normal
SCREEN
PIP/DW
/ E
button to select CSM.
/ E
ACM
LIST
D / E button to select the
temperature.
Manual Colour
MUTE
95
button and then
desired colour
VOL
Cool
Normal
Contrast
SCREEN
SSM
MENU
G
ACM
POWER
PSM
/ E
button to select the PIC-
PICTURE MENU
sRGB
-
mode
(RGB[PC], HDMI[PC]
When the set
connected to external
was
function, It's adjusted
image
only)
a
equipment with sRGB
difference to display the equal
colour
STATION
PSM
PICTURE G
CSM
ACM
SOUND
each other.
95
Brightness
50
Colour
50
Sharpness
60
TIME
Contrast
SPECIAL
2.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select sRGB.
3.
Press the G button and then D
1.
STATION
PSM
PICTURE
CSM
TIME
or
PIP/DW
Off.
INPUT
s-RGB
SOUND
button to select On
/ E
SCREEN
G
Contrast
95
Brightness
50
MULTIMEDIA
POWER
On
Off
DVD
VCR
SPECIAL
SSM
PSM
SCREEN
PIP/DW
4.
5.
Press the OK
Repeatedly
viewing.
or
Menu
Prev.
F button.
press the MENU button to return to normal TV
MENU
OK
ACM
-
-
(Active Color Management)
the ACM to select the desired skin colour
This function works in the following mode:
Adjust
option.
TV, AV1, AV2, AV3, COMPONENT [480i, 480p, 576i, 576p, 720p,
1080i],
HDMI DTV
[480p, 576p, 720p,1080i].
-I t 's not available to
use
VOL
PR
MUTE
this function in XD Off mode.
1.
Press the MENU button and then
PICTURE menu.
2.
Press the G button and then
use
3.
Press the G button and then
use
use
D / E button to select the
D / E button to select ACM.
F / G button to make approLIST
STATION
PSM
PICTURE
CSM
G
ACM
SOUND
TIME
SPECIAL
Contrast
95
Brightness
50
Colour
50
Sharpness
60
Fleshtone
0
Greentone
0
Bluetone
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
0
SCREEN
PIP/DW
priate adjustments.
The adjustment range
4.
5.
Menu
Prev.
of ACM is 0
3.
~
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
17
PICTURE MENU
Manual Picture Control
STATION
(User option)
PSM
You
PICTURE G
CSM
ACM
SOUND
TIME
SPECIAL
Contrast
95
Brightness
50
Colour
50
Sharpness
60
adjust picture contrast, brightness, colour, sharpness
tint (NTSC input only) to the levels you prefer.
In the broadcasting system PAL/SECAM, the picture item
can
and
Tint
doesn't work.
SCREEN
PIP/DW
INPUT
1.
Press the MENU button and then D
TURE menu.
/ E
2.
Press the G button and then D
picture item.
button to select the desired
MULTIMEDIA
STATION
PSM
PICTURE
CSM
POWER
/ E
button to select the PIC-
ACM
SOUND
DVD
TIME
VCR
SPECIAL
Contrast
95G
Brightness
50
Colour
50
Sharpness
60
SSM
PSM
SCREEN
PIP/DW
3.
MENU
5.
OK
Prev.
Press the G button and then F
adjustments,
4.
Menu
/ G
then it will be stored for the
User.
viewing.
adjustment for PICTURE
colour, sharpness and tint) affect both
PIP
PR
MUTE
LIST
18
picture
appropriate
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Note
VOL
button to make
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
:
or
The
Twin Picture mode.
(contrast, brightness,
main and sub picture in
menu
the
SOUND MENU
SSM
(Sound Status Memory)
This function lets you enjoy the best sound without any special
adjustment because the set automatically selects the appropriate
sound option based on the program content.
When adjusting sound options equalizer manually, SSM is auto-
matically changed
1.
2.
STATION
BBE
PICTURE
SOUND
SSM
G
BBE
Equalizer
SPECIAL
SCREEN
PIP/DW
SRS TSXT
Flat
AVL
Balance
SOUND
G
0
TIME
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select SSM.
PICTURE
AVL
Balance
to User.
STATION
SSM
0
Music
Movie
Equalizer
INPUT
Speech
TIME
MULTIMEDIA
POWER
User
SPECIAL
DVD
SCREEN
PIP/DW
3.
4.
5.
VCR
Menu
Prev.
SSM
PSM
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
To recall your preferred setting, press the SSM button until the
desired sound (SRS TSXT, Flat, Music, Movie, Speech or User)
appears. The sound SRS TSXT, Flat, Music, Movie and Speech
are programmed for good sound reproduction at the factory and
cannot be changed.
Note :
If you press the SSM button after making appropriate adjusta.
ment on the Equalizer sub menu, the display User automatically appears even though you have already set a factory preset setting; SRS TSXT, Flat, Music, Movie or Speech.
b.
Equalizer isn't suitable to use SRS TSXT.
OK
VOL
PR
MUTE
R
-
-
is a trademark of SRS
TruSurround XT technology is
SRS Labs, Inc.
Labs, Inc.
incorporated
under license from
BBE
-
BBE
ter
High Definition Sound
speech intelligibility and
-I t 's not available to
1.
2.
LIST
use
and presence for betmusical realism.
this function in SRS TSXT mode.
restores
clarity
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select BBE.
STATION
G
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
On
Off
AVL
Balance
SOUND
SIZE
SSM
BBE
PICTURE
Q.VIEW
0
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
19
SOUND MENU
AVL
STATION
SSM
BBE
PICTURE
AVL
Balance
SOUND
(Auto Volume Leveler)
G
0
Equalizer
If you select AVL On, the set automatically
ume level even if you change programmes.
keeps
on an
equal
vol-
TIME
SPECIAL
1.
Press the MENU button and then D / E button to select the
SOUND menu.
2.
Pressthe Gbutton andthenD /Ebuttonto selectAVL.
SCREEN
PIP/DW
STATION
SSM
BBE
PICTURE
G
AVL
Balance
SOUND
INPUT
0
On
Off
Equalizer
TIME
MULTIMEDIA
POWER
SPECIAL
SCREEN
DVD
VCR
PIP/DW
Prev.
SSM
PSM
3.
4.
5.
MENU
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
OK
Balance
You
VOL
Menu
PR
MUTE
can
adjustment
adjust
balance.
1.
Press the MENU button and then D / E button to select the
SOUND menu.
2.
Press the G button and then D / E button to select Balance.
STATION
SSM
BBE
PICTURE
AVL
Balance
SOUND
0G
LR
Equalizer
TIME
SPECIAL
LIST
Q.VIEW
SCREEN
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
PIP/DW
HOLD
3.
Press the G button.
4.
Make desired
pull-down
5.
6.
adjustment
Prev.
with the F / G button
on
the Balance
menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
20
Menu
SOUND MENU
Equalizer (option)
STATION
1.
Press the MENU button and then D / E button to select the
SOUND menu.
BBE
PICTURE
3.
AVL
Balance
SOUND
Press the G button and then D / E button to select Equalizer.
Press the G button in Equalizer to display the Equalizer sub
2.
SSM
G
0
Equalizer
TIME
SPECIAL
menu.
SCREEN
PIP/DW
STATION
SSM
BBE
PICTURE
SOUND
120
AVL
200
Balance
0
Equalizer
G
500
1.2K
TIME
3K
7.5K
SPECIAL
INPUT
MULTIMEDIA
12K
POWER
SCREEN
PIP/DW
Menu
Prev.
DVD
VCR
SSM
PSM
4.
5.
6.
7.
Select
the D / E button.
Make appropriate sound level with the F / G button.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
a
sound band
by pressing
viewing.
MENU
OK
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
Audio signal from audio L input is sent to left and right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speakers.
Audio signal
speakers.
from audio R
input
is sent to left and
right
VOL
PR
MUTE
loudLIST
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
21
SOUND MENU
Stereo/Dual
When
reception
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
selection for dual
language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
Language
NICAM
reception
If your set is
I/II
with the receiver for NICAM
reception, the
Companding Sound
high quality NICAM (Near Instantaneous
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
When
NICAM
MONO
2.
When
or
FM
3.
mono
is
received, you
can
select NICAM
is
received, you
can
select NICAM
FM MONO.
NICAM stereo
STEREO
22
equipped
or
FM MONO. If the stereo
signal
is
weak, switch
to
mono.
When NICAM dual is
received, you
NICAM DUAL II
NICAM DUAL I+II
or
can
select NICAM DUAL
or
MONO.
I,
TIME MENU
Clock
You must set the time
before
correctly
STATION
on/off time function.
using
Clock
Off time
PICTURE
1.
2.
On time
Auto
Press the MENU button and then D / E button to select the
TIME menu.
Press the G button and then D / E button to select Clock.
SOUND
TIME
sleep
G
SPECIAL
SCREEN
STATION
Clock
G
:
--
--
PIP/DW
Off time
PICTURE
On time
Auto
sleep
SOUND
TIME
SPECIAL
SCREEN
INPUT
PIP/DW
POWER
Prev.
Menu
MULTIMEDIA
DVD
3.
Press the G
4.
hour.
Press the G
button and then
use
D / E button to
adjust
VCR
the
SSM
PSM
button and then
use
D / E button to
adjust
the
minute.
5.
6.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
On/Off Timer
Timer function
OK
operates only if
Off Timer function overrides
time.
The TV must be in
current time has been
on
Timer function if
they
already
are
set.
set to the
same
standby
mode for the On Timer to work.
1.
Press the MENU button and then D / E button to select the
TIME menu.
2.
Press the G
Time
or
button and then
use
VOL
PR
MUTE
D / E button to select Off
On Time.
STATION
Clock
Off time
PICTURE
On time
Auto
G
On
Off
sleep
SOUND
12
TIME
:
Volume
Programme
SPECIAL
00
LIST
Q.VIEW
30
1
SIZE
POSITION
INDEX
HOLD
SCREEN
PIP/DW
Menu
Prev.
I/II
3.
Press the G button and then
4.
Press the G
PIP
SLEEP
D / E button to select On.
button and then use D / E button to adjust the
use
hour.
5.
Press the G
button and then
use
D / E button to
adjust
the
minute.
6.
7.
8.
Time function ; Press the G button and then use D / E
button to adjust volume level and programme number.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
Only On
viewing.
23
TIME MENU
Auto
STATION
Clock
If there is
Off time
PICTURE
no
On time
Auto
SOUND
TIME
sleep
input signal,
the TV turn off
automatically
after 10 min-
utes.
sleep
G
SPECIAL
1.
Press the MENU button and then D / E button to select the
TIME menu.
2.
Press the G button and then D
SCREEN
PIP/DW
/ E button to select Auto
sleep.
STATION
Clock
Off time
PICTURE
On time
Auto
sleep
GOn
Off
SOUND
INPUT
MULTIMEDIA
TIME
POWER
SPECIAL
DVD
VCR
SCREEN
PIP/DW
SSM
PSM
3.
4.
5.
MENU
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
OK
Sleep
Sleep
Timer
timer turns the set off at the
preset time.
Press the SLEEP button to select the number of minutes. The diszz
Min will appear on the screen, followed by 10, 20, 30,
play
---
VOL
PR
MUTE
60, 90, 120, 180 and 240 minutes. The timer begins
to count down
from the number of minutes selected.
Note :
a. To check the
remaining sleep time,
press the SLEEP button
once.
b. To cancel the sleep time, repeatedly press the SLEEP button
zz
Min appears.
until the display
c. If you turn the set off after setting the sleep timer, the setting will
be erased.
---
LIST
24
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
SPECIAL MENU
Child Lock
STATION
The TV
can
be set
so
that the remote control handset is needed to
control it. This feature
can
be used to
Language
Child lock
PICTURE
prevent unauthorized view-
Demo
SOUND
ing.
TIME
SPECIAL G
1.
2.
Press the MENU button and then D / E button to select the
SPECIAL menu.
Press the G button and then D / E button to select Child lock.
STATION
SCREEN
PIP/DW
Language
Child lock
PICTURE
GOn
Off
Demo
SOUND
INPUT
MULTIMEDIA
POWER
TIME
SPECIAL
DVD
VCR
SCREEN
3.
4.
5.
SSM
PSM
PIP/DW
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
EXIT
MENU
viewing.
OK
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
Demo
Use it to
see
the difference between XD demo
It's not available to
use
this function in
on
and XD Demo off.
RGB[PC], HDMI[PC]
VOL
PR
MUTE
mode.
1.
Press the MENU button and then D / E button to select the
SPECIAL menu.
2.
Press the G button and then D / E button to select XD Demo.
LIST
STATION
Q.VIEW
Language
Child lock
PICTURE
Demo
G
To start
SIZE
POSITION
INDEX
HOLD
SOUND
TIME
I/II
SPECIAL
PIP
SLEEP
SCREEN
PIP/DW
Menu
3.
Press the G button to
4.
To
stop XD Demo,
Prev.
XD Demo.
press the EXIT button.
begin
25
SCREEN MENU
Auto
STATION
Auto
PICTURE
config.
ARC
1.
Cinema
SOUND
NR
Reset
2.
TIME
mode
only)
and minimizes
Automatically adjusts picture position
config.
Manual
Configuration (RGB [PC]
image shaking.
Press the MENU button and then use D / E button to select the
SCREEN menu.
Press the G button and then use D / E button to select Auto
config..
SPECIAL
SCREEN G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
G
To set
config.
ARC
Cinema
SOUND
NR
Reset
TIME
SPECIAL
SCREEN
INPUT
MULTIMEDIA
PIP/DW
POWER
Menu
Prev.
DVD
VCR
3.
SSM
PSM
Press the G button to start Auto config..
When Auto config. has finished, Ok will be shown on screen.
If the position of the image is still not correct, try Auto adjustment
4.
5.
MENU
again.
If picture needs to be adjusted more after Auto adjustment in
RGB (PC), you can adjust the Manual config..
Repeatedly press the MENU button to return to normal TV
viewing.
Note
OK
a.
b.
:
Although the image is still not correct, your
properly but needs further adjustment.
The Auto config. functions don't need to
set is
be
functioning
run
for HDMI
mode.
Manual
VOL
PR
MUTE
Configuration (RGB [PC]
mode
only)
If the picture isn't clear after auto adjustment and especially that
characters are still trembling, adjust the picture phase manually.
To correct the screen size, adjust H Size / V Size.
1.
2.
Press the MENU button and then use D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Manual
config..
LIST
Q.VIEW
STATION
Auto
config.
Manual
SIZE
POSITION
INDEX
PICTURE
HOLD
config.
TIME
I/II
PIP
Phase
0
H Size
0
V Size
0
H Position
0
V Position
0
ARC
Cinema
SOUND
G
NR
Reset
SLEEP
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu Prev.
Press the G button and then D / E button to select Phase,
H Size, V Size, H Position or V Position.
Press the F / G button to make appropriate adjustments.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : It's not available to use H-Position, V-Position function in
COMPONENT 480i/576i mode.
26
SCREEN MENU
Setting
Picture Format
You can watch the screen in various picture formats ; Spectacle,
Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom.
STATION
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
1.
Press the MENU button and then use D / E button to select the
SOUND
2.
SCREEN menu.
Press the G button and then
TIME
use
D / E
NR
Reset
button to select ARC.
SPECIAL
SCREEN G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
SOUND
config.
ARC
G
Cinema
Spectacle
Original
NR
4:3
16:9
Reset
TIME
14:9
Zoom
SPECIAL
SCREEN
PIP/DW
INPUT
Menu
MULTIMEDIA
POWER
Prev.
DVD
VCR
3.
Press the G button and then use D / E
button to select
Spectacle, Full (option), Original, 4:3, 16:9, 14:9 or Zoom.
ARC
SSM
PSM
Spectacle
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen.
MENU
Full (option)
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally or vertically, in
a linear proportion, to fill the entire screen fully.
OK
Original
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available
in all
countries)
VOL
PR
MUTE
4:3
selection will lead you to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the left and
right sides.
Following
16:9
(Wide)
Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs).
14:9
You
LIST
SIZE
enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just
like that the screen 4:3 is magnified to the left / right.
Q.VIEW
POSITION
INDEX
HOLD
can
I/II
PIP
SLEEP
Zoom
selection will lead you to view the picture without any
alternation, while filling the entire screen. However, the top and
bottom portions of the picture will be cropped.
Following
4.
Repeatedly press
viewing.
Note
:
You
can
only
the MENU button to return to normal TV
select 4:3 and 16:9
(Wide)
in RGB and HDMI.
27
SCREEN MENU
Cinema
STATION
Auto
config.
Manual
PICTURE
When you watch the
config.
ARC
set to the best
picture
appearance.
This function works in the
COMPONENT 480i/576i.
Cinema
SOUND
movie, this function adjusts the
NR
Reset
TIME
SPECIAL
mode
following
:
TV, AV1, AV2, AV3
or
SCREEN G
PIP/DW
1.
Press the MENU button and then D / E button to select the
SCREEN menu.
2.
Press the G button and then D / E button to select Cinema.
STATION
Auto
config.
Manual
MULTIMEDIA
INPUT
PICTURE
config.
ARC
GOn
Cinema
POWER
SOUND
TIME
DVD
Off
NR
Reset
VCR
SPECIAL
SSM
PSM
SCREEN
PIP/DW
3.
MENU
4.
5.
OK
NR
VOL
PR
MUTE
Menu Prev.
Press the G button and then D
Press the OK or F button.
Repeatedly
viewing.
/ E
button to select On
or
Off.
press the MENU button to return to normal TV
(Noise Reduction)
1.
Press the MENU button and then D / E button to select the
SCREEN menu.
2.
Press the G button and then D / E button to select NR.
STATION
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
SOUND
NR
G
Reset
TIME
3DNR
0
MPEG NR
0
SPECIAL
LIST
Q.VIEW
SCREEN
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
PIP/DW
HOLD
3.
Menu Prev.
Press the G button and then
use
D / E button to select 3D NR
MPEG NR.
Press the F / G button to make appropriate adjustments.
The adjustment range of 3D NR is 0
2.
The adjustment range of MPEG NR is 0
15.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
or
4.
~
~
5.
6.
viewing.
Note : It's available to use 3D NR function in TV, AV1, AV2, AV3
COMPONENT (480i/576i) mode.
28
or
SCREEN MENU
to
Initializing (Reset
original factory value)
STATION
This function
operates in
To initialize the
adjusted
current mode.
Auto
config.
Manual
PICTURE
value.
config.
ARC
Cinema
SOUND
NR
Reset
TIME
1.
2.
Press the MENU button and then D / E button to select the
SCREEN menu.
SPECIAL
SCREEN G
Press the G button and then D / E button to select Reset.
STATION
Auto
config.
Manual
PICTURE
PIP/DW
config.
ARC
Cinema
SOUND
NR
Reset
G
Toset
TIME
MULTIMEDIA
INPUT
SPECIAL
POWER
SCREEN
DVD
PIP/DW
VCR
Menu
Prev.
PSM
3.
SSM
Press the G button.
You
Position, PIP size, PIP position, PIP
Transparency, Clock, Phase, H-POS, V-POS and sub picture
can
initialize
size of twin
picture.
MENU
OK
VOL
PR
MUTE
LIST
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
29
PIP/DW MENU
Main Picture Source Selection
STATION
Input
Inputs can
Component2
DW
PICTURE
PIP
PIP
SOUND
Input
Win. size
Win.
TIME
SPECIAL
be
set
PIP
Transparency
PIP
System
TV, AV1, AV2,
AV3,
Component1,
RGB, HDMI mode. AV mode is used when
or
cassette recorder
position
for
(VCR),
other
or
equipment
video
a
is connected to the
set.
SCREEN
PIP/DW
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
G
INPUT
MULTIMEDIA
POWER
1.
Press the MENU button and then D / E button to select the
PIP/DW menu.
2.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV,AV1,
AV 2 AV 3 Component1, Component2 or RGB, HDMI/DVI.
3.
DVD
VCR
,
,
SSM
STATION
PICTURE
TIME
MENU
SPECIAL
TV
DW
AV1
PIP
AV2
PIP
SOUND
G
Input
Input
AV3
Win. size
Component1
Win.
Component2
position
PIP
Transparency
RGB
PIP
System
HDMIDVI
SCREEN
PIP/DW
OK
AV1
AV2
:
AV3
:
VOL
PR
MUTE
:
on
RGB
Prev.
VCR connected to the AV1 INPUT sockets of the set
VCR connected to the AV2 INPUT sockets of the set
VCR connected to the AV3 INPUT sockets of the set
DVD connected to the DTV/DVD INPUT sockthe back of set
Component1/2
ets
Menu
:
:
PC connected to the RGB INPUT sockets
on
the back of
the
HDMI/DVI
set
HDMI/DVI
4.
5.
:
DTV/DVD
INPUT connected
to
INPUT sockets on the back of set
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
LIST
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
Alternatively you can select the TV, AV, Component
mode by pressing the INPUT button.
In
AV, Component
press the PR D / E
30
or
or
RGB, HDMI mode,
NUMBER buttons.
or
RGB, HDMI
to return to TV
mode,
Picture In Picture
Option :
PIP (Picture
In
Picture) displays
a
picture
within
the sub
picture.
a
(PIP)
Function
picture.
On and off
Press the PIP button to switch
on
Press EXIT button to switch it off.
Each press of PIP button button
shown below.
the
changes
screen
display
as
MULTIMEDIA
INPUT
POWER
DVD
VCR
PSM
SSM
EXIT
MENU
Note
ture
When the sub
:
picture
size is 1/2 of the main
picture,
the
pic-
quality might get poor.
PIPPR-
mode selection for sub
Input
picture
Press the PIP INPUT button to select the
input
mode for the sub
VOL
PIPPR+
SWAP
PIPINPUT
PR
MUTE
picture.
Each time this button is
ture is
displayed
as
Programme
pressed,
each
input
mode for the sub
shown below.
number
AV2
AV1
AV3
HDMI/DVI
RGB
pic-
LIST
Component2
Component1
Note :
a.
When the PIP function is switched on, you can also adjust it in
the PIP/DW menu.
b. In some models, when the sub picture quality get poor in AV
modes for sub picture, select Auto, PAL, SECAM or NTSC in
PIP System menu.
Q.Swapping
between main and sub
Press the SWAP button to
Note : When the main
available.
Programme
The sub
is TV
or
selection for sub
AV
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
pictures
the main and sub
exchange
picture
Q.VIEW
pictures.
modes, the swapping is
picture
programme selection is available when the sub picture is TV mode. Press the PIP PR +/- buttons to select a programme for the sub picture.
picture
31
Picture In Picture
Sub
picture
(PIP)
Function
size
Press the SIZE button and then F / G button to
ture picture size.
adjust
the sub
pic-
With SIZE button in
DW1, DW2 modes, main and sub picture is
adjusted simultaneously. With SIZE button in PIP mode, sub picture
is
INPUT
adjusted.
MULTIMEDIA
POWER
DVD
VCR
PSM
SSM
Sub
picture position change
Press the POSITION button.
Repeatedly press the D / E
is achieved. The sub picture
or
F / G
moves
button until desired
up/down
or
position
left/right.
MENU
Adjusting
OK
1.
2.
PIP
Transparency (PIP
mode
only)
Press the MENU button and then D / E button to select the
PIP/DW menu.
Press the G button and then D / E button to select PIP
Transparency.
VOL
3.
Press the G button and then F / G button to
4.
parency.
The adjustment range of PIP Transparency is 0
10.
Repeatedly press the MENU button to return to normal TV
PR
MUTE
32
Q.VIEW
SIZE
POSITION
INDEX
I/II
PIP
SLEEP
HOLD
PIP trans-
~
viewing.
LIST
adjust
Teletext
Teletext
(or
TOP
with the teletext
Teletext is
a
text)
is
system
an
can
grammes, share
on
systems.
by
most TV stations which
news,
and many other
The teletext decoder of this TV
FASTEXT
a
set
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
SIMPLE
consists of
(standard teletext)
selected by directly entering
ber of pages which are
sponding page number. TOP and FASTEXT
methods
only
receive the teletext broadcast.
information
prices
therefore
optional function,
free service broadcast
up-to-the-minute
(option)
are
the
MULTIMEDIA
POWER
a numcorre-
DVD
VCR
more
modern
and easy selection of teletext information.
allowing quick
INPUT
PSM
SSM
Switch on/off
Press the TEXT button to switch to teletext.
If TV and text
picture
MENU
displayed half and half of the
again to display text picture fully.
are
press the TEXT button
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time
on
the
tion,
TEXT
are
EXIT
screen,
OK
displayed
headline. The first page number indicates your selecwhile the second shows the current page displayed.
screen
Press the TEXT button to switch off teletext. The
mode
previous
reappears.
VOL
PR
MUTE
SIMPLE text
Page
1.
2.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the
lowing
preceding
or
fol-
LIST
SIZE
Q.VIEW
POSITION
INDEX
MODE
page.
M
I/II
Programming
a
HOLD
PIP
SLEEP
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
4.
coloured button.
buttons, select the page you wish
to pro-
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
you can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
33
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four
fields-red, green, yellow and blue
field denotes the next group
and the blue field indicates the next block.
MULTIMEDIA
INPUT
POWER
DVD
VCR
PSM
matic overflow to the next block.
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
the D button
Alternatively
MENU
EXIT
yellow
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
SSM
TEXT
screen.
The
at
4.
The
red
button
permits
the E
Alternatively
can
can
to
existing
be used.
return
to
previous
selection.
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
PIPPR-
VOL
PIPPR+
SWAP
PIPINPUT
PR
MUTE
TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
LIST
SIZE
Q.VIEW
POSITION
INDEX
1.
Press the
2.
You
3.
M
I/II
PIP
can
button to select the index page.
select the pages which are colour coded
i
tom line with the
HOLD
MODE
selection
SLEEP
same
along
the bot-
coloured buttons.
Corresponding to the SIMPLE
page by entering its three digit
teletext
mode, you
can
select
a
page number with the NUMBER
buttons in FASTEXT mode.
4.
The D / E button
lowing
34
page.
can
be used to select the
preceding
or
fol-
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
MULTIMEDIA
INPUT
POWER
SIZE
DVD
VCR
Selects double
Press this
Press this
height text.
button to enlarge the top
button again to enlarge
page.
Press this button
again
SSM
PSM
half of the page.
the bottom half of the
to return to the normal
display.
TEXT
MENU
UPDATE
Displays the TV picture on the screen while waiting for the new
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the updated teletext page.
PIPPR-
PIPPR+
SWAP
EXIT
PIPINPUT
HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on
the
screen
below the time. When this button is
the
stop symbol is displayed
the
screen
at the
top left-hand
VOL
PR
MUTE
pressed
corner
of
and the automatic page change is inhibited.
To continue press this button again.
LIST
Q.VIEW
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
SIZE
POSITION
INDEX
ture.
To switch the TV
HOLD
MODE
off press this button again.
Note : When TV and text picture are displayed half and half
of the screen, MIX function is not available.
picture
?
I/II
PIP
M
SLEEP
TIME
This button has two functions:
a) When viewing
play the time at
TV programme, press this button to disthe top right hand corner of the screen.
a
Press this button again to remove the display.
b) In teletext mode, press this button to select
sub page
at the bottom
a
number. The sub page number is displayed
of the screen. To hold or change the sub page, press the
RED/ GREEN D / E or NUMBER buttons. Press this button again to exit this function.
35
Connection of PC
PC in socket
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
AV2
AV1
OUT
INPUT
INPUT
S-VIDEO
INPUT 1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
(L)
AUDIO
(R)
P P
G O
R R
A T
D
1.
Connect the
signal
cable from the monitor
PERSONAL COMPUTER to the PC
2.
output socket of the
socket of the set.
input
Connect the audio cable from the PC to the RGB INPUT
RGB INPUT
AUDIO sockets
(L)
AUDIO
(R)
(L)
AUDIO
on
the back of the set.
(R)
E
DVI / RGB INPUT
3.
Press the INPUT
MULTIMEDIA button to select RGB
or
or
HDMI/DVI
HDMI/DVI.
4.
Switch
on
The set
Note
a.
the
can
PC, and the PC
be
operated
as
screen
appears
the PC monitor.
the set.
:
Connect PC to the PC
input
sockets of the set after
changing
the resolution of PC.
PERSONAL COMPUTER
b.
If you want to watch the PC monitor
the POWER button
only,
of the PC isn't
Displayable
MODE
EGA
VGA
SVGA
XGA
switch off the set with
the remote control handset.
on
switch off the set with the ON/OFF button
on
the set, the
(If
you
screen
displayed.)
Monitor
Specification
Resolution
640X350
640X480
800X600
1024X768
(Synchronization input
36
on
form
:
Horizontal
Vertical
Frequency (KHz)
Frequency (Hz)
37.9
85
31.5
60
37.9
72
37.5
75
43.3
85
35.1
56
37.9
60
48.1
72
46.9
75
53.7
85
48.4
60
56.5
70
60.0
75
68.7
85
separate)
Connection of external
You
can
connect additional
such
equipment,
as
equipment
VCRs, camcorders
etc. to your set.
COMPONENT
INPUT 2
Here shown may be somewhat different from your set.
INPUT
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
Aerial socket
RGB INPUT
(L)
AUDIO
(R)
P P
G O
R R
A T
D
(L)
(L)
AUDIO
AUDIO
(R)
(R)
E
DVI / RGB INPUT
1.
Connect the RF out socket of the VCR to the aerial socket
HDMI/DVI
on
the back of the set.
2.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
Store the VCR channel
4.
desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
VCR
on a
COMPONENT
INPUT 2
5.
Press the PLAY button
on
INPUT
480i/480p/
576i/576p/
720p/1080i
the VCR.
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S
VIDEO
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
RGB INPUT
U
MONO
P P
Audio/Video
input
sockets
(L)
(option)
(L)
G
AUDIO
(R)
O
R R
A T
D
(L)
AUDIO
AUDIO
(R)
(R)
E
DVI / RGB INPUT
HDMI/DVI
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
Press theINPUTbutton to
selectAV1,AV2orAV3.
3.
Press the PLAY button
the VCR.
The VCR
on
playback picture
on
appears
the
VCR
screen.
(R)
If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Note
AUDIO
:
(L)/
MONO
VIDEO
S-VIDEO
AV3
INPUT
S-Video / Audio
sockets
input
(option)
VCR
When
connecting
quality
1.
an
will be further
VCR to the S-VIDEO
socket, the picture
improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
COMPONENT
INPUT
of the set.
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S VIDEO
2.
Connect the audio cable from the VCR to the AUDIO sockets of
Select AV1 AV2
,
or
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
RGB INPUT
U
P
P
GO
R R
AUDIO
theAV1,AV2orAV3.
1
480i/480p/
576i/576p/
720p/1080i
PR
VIDEO
MONO
(L)
3.
INPUT
2
480i/480p/
576i/576p/
720p/1080i
(L)
A T
D
E
(R)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
AV 3
by pressing
the INPUT button
repeat-
HDMI/DVI
edly.
4.
Press the PLAY button
The VCR
Note
:
on
playback picture
the VCR.
appears
on
the
SET TOP Box
screen.
If both S-VIDEO and VIDEO sockets have been connected
to the VCR
simultaneously, only
the S-VIDEO
can
be received.
COMPONENT
INPUT
2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
INPUT
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
(L)
AUDIO
Monitor
output
(R)
sockets
Connect the audio/video in sockets of the other TV
P P
GO
R R
A T
D
E
RGB INPUT
(L)
AUDIO
(R)
(L)
AUDIO
(R)
DVI / RGB INPUT
HDMI/DVI
or
monitor to
MONITOR OUTPUT sockets of the set.
VCR
37
Connection of external
DVD
1.
input
sockets
Connect the DVD
or
Y PB
equipment
PR)
output
sockets
(Y
Cb
Cr,
Y Pb
of the DVD to the DTV/DVD sockets
Pr,
(Y
Y B-Y R-Y
PB
PR)
of the
COMPONENT
INPUT
MONITOR
OUT
AV2
INPUT
4.
Press the PLAY button
1.
on
playback picture
AUDIO
(L)
A T
D
E
(R)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
HDMI/DVI
the DVD.
appears
on
the
DVD
screen.
Connect the SET TOP
(or,
inputs
to the DTV/DVD sockets
(Y
connect the SET TOP with the D-Sub
PB
PR)
output
socket to RGB INPUT socket on the set and audio cable of the
HD-SET TOP to the AUDIO sockets of RGB/DVI INPUT.)
3.
P P
G O
R R
(L)
RGB INPUT
sockets
of the set.
2.
U
MONO
Press the INPUT or MULTIMEDIA button to select
Component 1 or Component 2.
input
PB
PR
3.
DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
VIDEO
Connect the audio cable from the DVD to COMPONENT sockets of the set.
The DVD
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
S-VIDEO
set.
2.
AV1
INPUT
INPUT
2
480i/480p/
576i/576p/
720p/1080i
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
Component
AV1
INPUT
PC/DTV
1
Y
(XGA/
480p/
576p/
720p/
1080i)
S-VIDEO
PB
PR
VIDEO
U
MONO
Connect the audio cable from the SET TOP to the DTV/DVD
AUDIO sockets of the set.
Press the INPUT
AV2
INPUT
INPUT
480i/480p/
576i/576p/
720p/1080i
P P
GO
R R
(L)
AUDIO
A T
D
E
(R)
RGB INPUT
(L)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
HDMI/DVI
MULTIMEDIA button to select
1, Component 2, RGB or HDMI/DVI.
or
SET TOP Box
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
INPUT
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
(L)
AUDIO
(R)
P P
G O
R R
A T
D
RGB INPUT
(L)
AUDIO
(L)
AUDIO
(R)
(R)
E
DVI / RGB INPUT
HDMI/DVI
SET TOP Box
38
Connection of external
-
HDMITM, the HDMI logo and High-Definition Multimedia Interface
equipment
are
trademarks
or
registered
trade-
marks of HDMI
-
-
-
-
-
-
Licensing.
This set can receive the High-Definition Multimedia Interface (HDMI) or Input of Digital Visual
Interface(DVI).
This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p,
720p, 1080i) modes.
When you Connect with HDMI/DVI Source Devices (DVD Player or Set Top Box or PC) supporting
Auto HDMI/DVI function, automatically, support Plug & Play and then set the HDMI/DVI Source
Devices (640 x 480p). After reading in HDMI/DVI Source Devices using Display Data Channel(DDC)
Protocol, EDID stored in the set is used. If HDMI/DVI Source Devices not supported Auto HDMI/DVI
been, the Resolution is set, manually.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
When Source Devices have DVI Output Connector, you must connect audio with separated
cable.(Refer to <How to connect>)
is
How to connect
1. When Source Devices
-
-
-
-
(DVD Player or Set Top Box) support HDMI.
If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable
.(not supplied with the product).
If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x
720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using
HDMI Cable.
2. When Source Devices
-
-
-
-
(DVD Player or Set Top Box) supports DVI.
If Source Devices have DVI Output Connector, Source Devices connect to the set with HDMI to DVI
Cable (not supplied with the product).
If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x
720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector,
RGB/DVI Audio Input of the set connect to Audio Cable (not supplied with the product). And then you
can
listen to normal Audio.
3. When PC
-
supports DVI.
If PC have DVI Output Connector, Source Devices
plied
-
-
-
-
-
-
connect to the set with HDMI to DVI Cable
(not
sup-
with the
product).
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
Use the the set's HDMI/DVI (VIDEO) for video connections, depending on your PC connector.
If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one
of either RGB Input or HDMI/DVI Input to display the PC on the set.
If he graphics card on the PC does output analog RGB and DVI simultaneously, the set to either RGB
Input or HDMI/DVI Input; (the other mode is set to Plug and Play automatically by the set.)
Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as
required.
In this case, Audio use other cable. When PC (or sound card of PC) have Analog Audio Output
Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio.
39
Connection of external
equipment
Reference
Cable
sample
HDMI Cable
(not supplied
with the
product)
HDMI to DVI Cable
(not supplied
with the
product)
Analog Audio
(not supplied
Cable
with
(RCA type)
the product)
Analog Audio Cable (Stereo to RCA type)
(not supplied with the product)
How to use
1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the set.
2. Turn on the display by pressing the POWER button on the set and HDMI/DVI Source Devices remote
control.
3. Select HDMI/DVI Input source in Main Input option of PIP/DW menu.
4. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source
Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC
graphics card or consult the manufacturer of the PC graphics card.
Notes:
-
-
-
-
-
Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
Avoid keeping a fixed image on the set screen for a long period of time. The fixed image may become
permanently imprinted on the screen. Use the Orbiter screen saver when possible.
When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position,
Size may not fit to Screen. As shown the lower picture, press the MENU button to adjust the screen
Position of the set and contact an PC graphics card service center.
When Source Devices connected HDMI/DVI Input output the set Resolution(480p, 720p, 1080i), the set
Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "No Signal" OSD
display in HDMI/DVI Input. And In case of Video Resolution not supported the set output in HDMI/DVI
Source Devices, "No Signal" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact
your service center.
40
Replacing
Lamp
unit
the
Lamp
replacement
<Front
*
You must
replace
the
lamp
when:
image gets darker or starts to deteriorate.
The lamp indicator is orange.
The lamp indicator is red.
The message "Replace the lamp" appears on the
when turning the TV on.
panel
of the TV>
The
Be careful when
-
-
-
-
-
-
-
-
replacing lamp
Lamp
indicators
Turn off the power with the remote control. In 3 minutes, press the power button to off on the front
panel and unplug the power cord.(For 2 minutes, cooling fan works after turning off power)
Allow the
lamp to cool for 30 minutes before replacing it.
Replace only with the same type lamp from a LG Electronics Service Centre. Using other lamp type
may cause damage to the TV and lamp.
Pull out the lamp only when replacing the lamp.
Keep the lamp unit out of reach of children or and heat sources such as radiators, stoves.
To reduce the risk of fire, lamp shall not be exposed to liquids or foriegn material.
Do not place the lamp near any heat source.
Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there
could be
-
screen
risk of fire.
a
Never touch the
To obtain
Lamp
a
model number is
Lamp
other
unit
on
a
the
or
lamp
otherwise
get it dirty.
unit
cover.
check the
lamp
LG electronic service center.
type of lamp may
cause
damage
to the TV
or
lamp.
disposal
LG electronic is
Dispose
glass
replacement Lamp
model and then locate
Using
unit
lamp
of the
provided with an interlock to reduce the risk of excessive ultraviolet
used lamp by returning it to the LG electronic service center.
radiation.
41
Replacing
Replacing
the
on
the remote control to STBY. In 3
press the power button to off
power cord.
the
lamp
2. Remove the 2
Lamp
Lamp
1. Turn off the power
(Allow
the
on
the front
panel
to cool for 30 minutes before
retaining
screwdriver then
screws on
the
separate the lamp
3. Remove the two
retaining
lamp
cover
screws on
the
and
minutes,
unplug
the
replacing it.)
cover
with
a
"+"
type
from the TV.
lamp
case
by using
"-"
lamp
case
Screws
type screwdriver.
4. Lift up the fixed wire knob
5. Pull out the knob
6. Insert the
slowly
on
and
lamp gently
correctly.
new
is inserted
the
the
Screws
lamp.
remove
the
lamp
into the correct
case.
position.
Make
Tighten
8.
Replace the lamp cover and tighten the cover screws.
(If the lamp cover is open, the lamp indicator flashes green
the TV will not turn on.)
-
-
-
screws
and
:
Only use LG approved lamp replacement.
Using incorrect type of lamp may cause damage to the
TV or lamp.
Make sure the lamp cover is securely fastened. If the lamp
is open, the TV will not turn
Reset
Lamp
*
You must reset
*
In
some
button
on
Lamp
Knob
Use Time
lamp
time
on
the
or
ENTER button
the remote control
2. Press the OK
use
cover
on.
menu
models, the lamp time may
1. Press the OK
42
it
you removed in step 3.
7.
Note
sure
or G
button.
time will be reset.
after
replacing
the
lamp.
not be reset.
panel and MUTE
simultaneously (About 5 seconds).
on
the front
Lamp
Use Time Reset Menu
100
Lamp Use Time
Total Lamp Use Time 11011
G
Lamp Use Time Reset
Reset
[Enter key]
Cancel
[Exit key]
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
(VCR only)
provider(s)
in ambient humidity or temperature may result in an unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
change
43
Download PDF