LG | CF-21S470PX | LG CF-21S470PX Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0307B
(MC019B,
077T TX,
cover
require
and quote this
service.
3840VA0014E)
b
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
TV Swivel function (option)
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favorite programme
Calling the programme table
9
Setting up
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Eye (option)
Turbo picture selection (option)
14
Sound adjustment (option)
SSM (Sound Status Memory)
Balance adjustment
Turbo sound selection (option)
Sound output selection
Stereo/Dual reception (option)
NICAM reception (option)
16
Other functions
TV and AV modes
Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
AVL (Auto Volume Leveler) (option)
CSM (Colour Status Memory) / Sleep timer
19
Game (option)
Block & Balloon (option)
Cricket & Car racing (option)
21
Timer (option)
Off timer / On timer
22
PIP operation
On and off
23
(option)
Programme selection for sub picture (option)
Input mode selection for sub picture
Swapping between main and sub pictures
Sub picture size / Sub picture freeze
Sub picture position change / 9 or 4 sub picture
Teletext (option)
24
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
Connection of external equipment
Aerial socket
Audio/Video in/out sockets (option)
Euro scart socket (option)
Headphone socket (option)
Troubleshooting
2
check list
27
Back
cover
Installation
Power
This set
ed
on
operates
the label
on
on an
AC mains
the back
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
or
shock
hazard, do
not expose the set to rain
or
moisture.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary
vibration, moisture, dust
set is
in
placed
the ventilation
or
heat. Also
position to allow a free flow
openings on the back cover.
a
ensure
that the
of air. Do not
cover
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
MUTE
1.
1
1
2
POWER
switches the set
handset, please install the bat-
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
standby.
3
2.
4
5
6
7
8
9
3.
NO FUNCTION
0
TV/AV
4.
SURROUND (º/*) (option)
selects surround sound.
5.
TURBO PICTURE / SOUND BUTTON
selects Turbo picture and sound.
6.
Δ( ΔΔ ) /
selects
select
2
3
MENU
/
4
SOUND
PICTURE
OK
TURBO/
5
()
PR
6
PR
()
7
PLAY
FF
P/STILL
STOP
REC
Φ
LIST
8
PSM
SSM
Ε
Ε
) (Programme Up/Down)
a
automatically.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
scans
REW
Ε(
programme or a menu item.
switches the set on from standby.
VOL
VOL
(option)
/
programmes
Γ
7.
VCR BUTTONS
control a LG video cassette recorder.
8.
SSM (Sound Status Memory)
recalls your preferred sound setting.
9.
PSM (Picture Status
recalls your preferred
I/II/
9
EYE/
TEXT/
PIP/
10
11
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
PR
12
PR
SWAP
M
i
INPUT
Memory)
picture setting.
10. EYE/* (option)
switches the eye function
on or
off.
11. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
12. SWAP
returns to the previously viewed programme.
selects a favorite programme.
4
a
number.
Location and function of controls
13. MUTE
switches the sound
on or
off.
14. TV/AV
selects TV or AV mode.
clears the menu from the screen.
switches the set on from standby.
15. MENU
selects
selects
a menu.
an
models).
index page in the teletext mode
(only
TELETEXT
POWER
MUTE
13
16. OK
accepts your selection
or
displays
the current mode.
17. LIST
displays
2
3
4
5
6
7
8
9
0
TV/AV
the programme table.
18. I/II/* (option)
selects the language during dual
selects the sound output.
19. SLEEP
sets the
1
language
broadcast.
(option)
14
MENU
/
sleep
timer.
15
SOUND
20. PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
9/4 PIP
switches on or off the 9 or 4 sub pictures.
COLOURED BUTTONS : These buttons
TELETEXT models) or programme edit.
are
used for teletext
PICTURE
OK
TURBO/
16
()
PR
VOL
VOL
PR
()
REW
PLAY
FF
P/STILL
STOP
REC
LIST
17
PSM
SSM
I/II/
18
(only
EYE/
TEXT/
PIP/
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
M
19
Battery
installation
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
PR
PR
SWAP
i
20
INPUT
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
Shown is a simplified representation of front or side panel.
Here shown may be somewhat different from your set.
VIDEO
VIDEO
6
(L)
r
ON/OFF
MENU
OK Φ VOL Γ Ε PR Δ
VIDEO
(L)-AUDIO-(R) !
P-TURBO-S
I
AUDIO
I
AUDIO
1234
(R)
!
7
!
!
7
!
r
ON/OFF
MENU
5
6
OK Φ VOL Γ Ε PR Δ
VIDEO
789
(L)-AUDIO-(R) !
S-TURBO-P
VIDEO
VIDEO
6
1234
(L)
I
AUDIO
I
AUDIO
(R)
r
ON/OFF
(Side panel)
MENU
5
6
OK Φ VOL Γ Ε PR Δ
1234
VIDEO AUDIO
5
789
!
TURBO
SOUND PICTURE
67
8
9
PRΔ
r
ON/OFF
MENU
Φ VOL
VOLΓ
OK
PRΕ
1234
5
9
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in standby mode.
dims when the set is switched on.
blinks when signal is input from the remote control.
3.
REMOTE CONTROL SENSOR
4.
MENU
selects
5.
OK
a menu.
accepts your selection
or displays
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
Φ
/
the current mode.
Γ
selects a programme or a menu item.
switches the set on from standby.
6.
AUDIO/VIDEO IN SOCKETS (AV) (option)
Connect the audio/video out sockets of external equipment to
these sockets.
Note :If both the input jacks on the front/side panel and back
panel have been connected to external equipments simultaneously, only the input jacks on the front/side panel can be received.
7.
HEADPHONE SOCKET
Connect the headphone
8.
9.
6
(option)
plug to this socket.
TURBO SOUND/PICTURE (option)
switches Turbo sound or Turbo picture on or off.
EYE (option)
adjusts picture according to the surrounding conditions.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
programme number with the
Volume
adjustment
Press the
Φ
/
Γ
button to
adjust
Δ
/ Ε
or
NUMBER
POWER
1
2
3
4
5
6
7
8
9
the volume.
0
Quick view
TV/AV
MENU
/
Press the SWAP button to view the last programme you
were
watching.
SOUND
OK
TURBO/
This function works only when Favorite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
Note
MUTE
()
:
PR
VOL
VOL
PR
()
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it by pressing the
or TURBO SOUND button.
MUTE,
Φ
/
display
Γ, SSM, I/II/*, º/*
Auto Demonstration
To review all the
menus
ton of the front
panel
programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
TV Swivel function
I/II/
(option)
In some models, you can manually turn TV set at left or right direction by 15 or 20 degrees, so that the watching degree is suitable for
your
SSM
SWAP
position.
Note : Swivel panel is fixed in the hole at the swivel panel on the
back of the set by small bar(Swivel fixer). To operate this function,
pull it out.
On
screen
language
selection
The menu can be displayed
First select your language.
on
the
(option)
screen
in desired
language.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the station menu.
Press the TV/AV button to return to normal TV viewing.
language.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down
1.
2.
3.
Repeatedly
menu.
4.
Change
the
setting
of
an
item in the sub
or
pull-down
menu
with
Φ/ΓorΔ/Ε.
pressing the OK or Φ
by pressing the Γ but-
You can move to the higher level menu by
button and to move to the lower level menu
ton.
MENU
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
In mono models, the Sound menu does not appear.
d.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
e.
In some models, the Language or Booster will not display.
CH.
OK
()
PR
VOL
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
OBG
{
{
OOI
ProgrammeOedit
FavoriteOprogramme
{
NormalOsearch
{
ODK
{
TurboOsearch
{
OOM
Language
{
OO9
VOL
PR
()
()O{OOKOMENUOTV
AV
Station
CH.
()O}{OOKOMENUOTV
AV
menu
PSM
{
PR.
{
User
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
()O{OOKOMENUOTV
Picture
CH.
AV
{
()O}{OOKOMENUOTV
AV
menu
SSM
{
00O-O-O-O-O-
Balance
{
01O CO 0O
3OO06O SO 1O
7
O05O SO 6O
9
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
DeleteOOOCopy
MoveOOOOOSkip
()O{OOKOMENUOTV
Sound
CH.
AV
menu
Input
{
ChildOlock
{
{
AutoOsleep
BlueOback
AVL
CSM
Game
{
{
{
{
Timer
{
()O{OOKOMENUOTV
Special
TV programme
8
()O}{OOKOMENUOTV
AV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Note
:
In
some
models up to 200 TV stations
can
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
{
be stored.
()O{OOKOMENUOTV
Auto programme
Station
Menu
{
AV
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
3.
Repeatedly
Press the
Press the
Γ
Γ
press the MENU button to select the Station menu.
button to select Auto programme.
button to display the Auto programme menu.
System
StorageOfrom
{
OBG
{
OOI
NormalOsearch
{
ODK
TurboOsearch
{
OOM
1
2
3
4
5
6
7
8
9
0
TV/AV
MENU
()O}{O OKOMENUOTV
4.
5.
6.
7.
8.
9.
AV
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Storage from.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5.
Press the OK button.
Press the Δ / Ε button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
OK
()
PR
VOL
VOL
PR
()
select Start.
Note :
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b.
If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the Γ button to begin auto programming.
a.
System
StorageOfrom
{
System
StorageOfrom
{
{
NormalOsearch
{
NormalOsearch
{
TurboOsearch
{
TurboOsearch
{
OOCO01O(BG)
77O7O7O736%
77O7O7O736%
MENU
MENU
(Normal search)
{
OOCO01O(BG)
(Turbo search)
All receivable stations are stored.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Press the TV/AV button to return to normal TV
viewing.
9
TV stations
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
{
{
Auto programme scan
To automatically scan the pictures of stored programmes, press the
() or
() button for about 3 seconds. The picture of stored programmes appears on the screen one by one.
To stop auto programme
buttons.
scanning,
Manual programme
tuning
press any button
except VCR
AV
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1
2
3
4
5
6
7
8
9
0
TV/AV
1.
2.
3.
Repeatedly
Press the
Γ
press the MENU button to select the Station menu.
button and then Δ / Ε button to select Manual
programme.
Press the
Γ
button to
MENU
display
the Manual programme
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
OK
()
PR
VOL
VOL
()O}{OOKOMENUOTV
4.
5.
PR
()
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
{
AV
Press the Δ / Ε button to select PR..
Press the Γ button to select the programme number. Select the
desired programme number with the Φ / Γ button or NUMBER
buttons on the PR. pull-down menu. Any number under 10 is
entered with a numeric '0' (or '00') in front of it, i.e. '05' (or
'005') for 5.
Press the OK button.
Press the Δ / Ε button to select System.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF
or Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{{{{
Stored
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV button to return to normal TV
10
menu.
OO9
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
Press the
Δ
3.
Press the
Γ
4.
Press the Δ button,You can
and the alphabet A to Z.
With the
/ Ε button to select Name.
button on the Name pull-down
button you
Ε
can
use a
ProgrammeOedit
FavoriteOprogramme
{
menu.
Language
{
CH.
opposite
Γ
6.
Select the next position by pressing the
your choice of the second character, and
Press the OK button.
7.
Press the TV/AV button to return to normal TV
5.
Booster
Station
Menu
{
{
+, -, the numeric 0 to 9
blank,
select in the
AutoOprogramme
ManualOprogramme
{
1 to 3.
()O{OOKOMENUOTV
direction.
AV
button and then take
so on.
viewing.
(option)
When the interference between programmes appear, select Booster
1
2
3
4
5
6
7
8
9
to Off.
1.
2.
3.
4.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Booster.
Press the Γ button.
Repeat
Press the
down
Δ
button to select On
Ε
/
or
Off
on
the Booster
0
TV/AV
MENU
pull-
menu.
OK
or Φ
5.
Press the OK
button.
6.
Press the TV/AV button to return to normal TV
viewing.
()
PR
VOL
VOL
PR
Fine
()
tuning
Normally
fine
is
only
necessary if
Repeat
Press the
3.
Press the
4.
Press the
on
Γ
Φ
/
Γ
1 to 3.
button to fine tune for the best
the Fine
pull-down
picture
and
menu.
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
{{{{
{
}{OOKOMENUOTV
6.
steps
button.
Booster
5.
is poor.
reception
the 'Manual programme tuning'
Δ / Ε button to select Fine.
1.
2.
sound
tuning
AV
Press the OK button.
Press the TV/AV button to return to normal TV
The
finely tuned programme
during programme selection.
will be indicated
viewing.
by a red number
11
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
AV
{
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Programme
edit.
Press the Γ button to display the Programme edit menu.
Repeatedly
00O-O-O-O-O-
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
1
2
3
4
5
6
DeleteOOOCopy
MoveOOOOOSkip
()O}{O OKOMENUOTV
7
8
9
0
TV/AV
AV
Deleting
1.
2.
MENU
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
OK
00O-O-O-O-O-
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
()
PR
VOL
03O SO 6O
6OO08O CO 0O
9
VOL
04O SO 6O
7OO09O CO 1O1
PR
Delete
()
MENUOTV
AV
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/
Γ
button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
00O-O-O-O-O-
again
to release this function.
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
MoveOOff
()O}{O MENUOTV
AV
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
Favorite programme
CH.
This function lets you select your favorite programmes
1.
2.
3.
press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Favorite
Repeatedly
programme.
Press the
Γ
button to
CH.
display the Favorite programme
AutoOprogramme
ManualOprogramme
6.
7.
8.
menu.
{
ProgrammeOedit
FavoriteOprogramme
{
Language
{
()O{OOKOMENUOTV
Station
Menu
{
{
AV
{
{
ProgrammeOedit
FavoriteOprogramme
{
SOff
{
S56n Ca 05
Language
{
()O}OOKOMENUOTV
4.
5.
directly.
AutoOprogramme
ManualOprogramme
S--O--O-O-O-O-S
S--O--O-O-O-OS--O--O-O-O-OS--O--O-O-O-O-
1
2
3
4
5
6
7
8
9
AV
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
--
Repeatedly
press the SWAP button to select stored favorite pro-
grammes.
0
TV/AV
MENU
OK
()
PR
VOL
VOL
PR
()
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display
the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
00O-O-O-O-O-
LIST
O05O SO 6O
9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O
9
04O SO 6O
7OO09O CO 1O1
()O}{O OKOMENUOTV
AV
Note :
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through a programme table
are 10 (or 20) programme table pages in which contain 100
(or 200) programmes.
Pressing the Δ / Ε or Φ / Γ button repeatedly turns the pages.
There
Press the TV/AV button to return to normal TV
viewing.
13
Picture
Picture
Menu
CH.
PSM
{
User
{
PSM (Picture Status
1.
2.
3.
()O{OOKOMENUOTV
adjustment
Memory)
Repeatedly press the MENU button to select the Picture menu.
Press the Γ button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
AV
CH.
PSM
{
SDynamic
User
{
SStandard
SMild
SGame
SUser
()O}OOKOMENUOTV
4.
5.
Press the OK or Φ button.
Press the TV/AV button to return to normal TV
You
MENU
AV
viewing.
also recall a desired picture (Dynamic, Standard,
Mild, Game or User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for good picture reproduction at the factory and cannot be changed.
can
OK
()
PR
VOL
VOL
Picture
adjustment
PR
()
You
can
ness
1.
2.
3.
adjust picture contrast, brightness, colour intensity, sharp(NTSC or NTSC AV only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select User.
Press the Γ button and then Δ / Ε button to select the desired
picture item on the User pull-down menu.
Repeatedly
CH.
PSM
{
User
{
CContrast
{
i
PSM
CBrightness{
()O}{O OKOMENUOTV
4.
5.
Press the
Press the
each sub
Γ
Φ
CColour
{
CSharpness
{
CTint
{
AV
button.
/ Γ button to make
appropriate adjustments
Contrast
()O}{O OKOMENUOTV
6.
7.
14
on
the
menu.
80
AV
You can also select other User items directly with Δ / Ε button
and adjust them with Φ / Γ button.
Press the OK button to store it for the picture User.
Press the TV/AV button to return to normal TV viewing.
Picture
adjustment
Eye (option)
On
some models, the set will automatically adjust the picture
according to the surrounding conditions. This will enable you to
enjoy the most suitable picture according to the surroundings.
Press the EYE/* button to switch the eye function
on or
off.
Off
When the eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions.
At this time the
display
but the display
tion changes.
in
Note
eye
:
in green does not appear continuously
appears each time the picture condi-
yellow
If you press the PSM
or
TURBO PICTURE button with the
ARC
SOUND
PICTURE
TURBO/
function, the eye function is automatically switched off.
()
PR
VOL
VOL
Turbo
picture
selection
When this function is on, the
(option)
picture
will be
PR
()
more
brilliant and dis-
tinct than normal.
Repeatedly
press the TURBO PICTURE button to switch
on or
off.
TURBO
(Turbo Picture off)
PSM
(Turbo Picture on)
EYE/
Note
:
If you press the PSM
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
CH.
SSM
{
Balance
{
adjustment (option)
Sound adjustment is an optional function only
adjustment can perform this function.
SSM
You
()O{OOKOMENUOTV
AV
a
set with sound
(Sound Status Memory)
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer. The surround sound creates an all around sound as in a concert hall.
can
Speech
press the MENU button to select the Sound menu.
Press the Γ button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
1.
Repeatedly
2.
3.
CH.
SSM
{
FFlat
Balance
{
FMusic
FMovie
FSpeech
TV/AV
FUser
{
MENU
()O}OOKOMENUOTV
AV
OK
Sound Frequency Adjustment
a. Press the Γ button in User to
()
PR
VOL
VOL
display
the User sub
menu.
PR
()
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENUOTV
AV
(RF STEREO, Flat)
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENUOTV
AV
(AV STEREO, Flat)
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
SSM
Press the TV/AV button to return to normal TV
viewing.
You
can
also recall a desired sound (Flat, Music, Movie,
Speech or User) with SSM button on the remote control. The
sound Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
ment
16
:
on
Sound
Balance
You
1.
2.
3.
can
adjustment (option)
adjustment
adjust
CH.
SSM
{
Balance
{
Sound
Menu
balance.
press the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select Balance.
Make desired adjustment with the Φ / Γ button on the Balance
Repeatedly
pull-down
CH.
SSM
{
Balance
{
AV
}{O OKOMENUOTV
FFFFF0
AV
Press the OK button.
Press the TV/AV button to return to normal TV
4.
5.
()O{OOKOMENUOTV
menu.
viewing.
TV/AV
Turbo sound selection
MENU
(option)
SOUND
When this function is on, the sound will be more emphasized and
amplified than normal.
Repeatedly press the TURBO SOUND button to switch on or off.
OK
TURBO/
()
PR
VOL
VOL
PR
()
TURBO
(Turbo
Sound
off)
(Turbo
Sound
on)
Sound output selection
SSM
In AV
mode, you
can
select
I/II/
output sound for the left and right loud-
speakers.
press the I/II/* button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
17
Sound
adjustment (option)
Stereo/Dual
reception (option)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo
signal is weak, you can switch to
the I/II/* button twice. In mono reception the
depth of sound is improved. To switch back to stereo, press the
I/II/* button twice again.
mono
by pressing
Language selection
If
for dual
language broadcast
programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II/* buta
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
I/II/
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II/* button repeatedly.
1.
2.
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
18
Other functions
TV and AV modes
CH.
be set for TV or AV mode. AV mode is used when a video
Inputs
cassette recorder (VCR), or other equipment is connected to the set.
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
Repeatedly
Press the
Press the
the Input
Γ
Γ
{
{
{
BlueOback
AVL
CSM
Game
Menu
{
{
{
Timer
{
()O{OOKOMENUOTV
AV
press the MENU button to select the Special menu.
button to select Input.
button and then Δ / Ε button to select TV or AV on
pull-down
CH.
menu.
Input
{
TTV
ChildOlock
{
TAV
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
p
{
()O}OOKOMENUOTV
1
2
3
4
5
6
7
8
9
{
{
{
Timer
4.
{
AutoOsleep
Special
Input
ChildOlock
AV
0
AV : VCR connected to the Euro scart socket or AV sockets
the set
Press the TV/AV button to return to normal TV viewing.
TV/AV
on
MENU
OK
Note :If both the input jacks on the front/side panel and back
panel have been connected to external equipments simultaneously, only the input jacks on the front/side panel can be received.
()
PR
VOL
VOL
PR
Alternatively you
TV/AV button.
In AV
mode,
can
select the TV
to return to TV
or
AV mode
mode, press the
Δ
/
by pressing
Ε or
the
()
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR
scart
outputs a switching voltage when connected to the Euro
socket, the set will switch to AV mode automatically. The set is
switched to AV mode when an AV signal is input. But
if you want to keep on watching TV mode, press the Δ / Ε or NUMBER buttons.
Press the TV/AV button to return to AV modes.
automatically
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off on
the Child lock pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
19
Other functions
Special
CH.
Menu
{
Input
ChildOlock
{
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
{
{
{
{
Timer
()O{OOKOMENUOTV
AV
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Γ
Press the
button and then Δ / Ε button to select On or Off on
the Auto sleep pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
Repeatedly
4.
Blue back
(option)
If you select On
ground appears
on
on
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Blue back.
Γ
Press the
button and then Δ / Ε button to select On or Off on
the Blue back pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
Repeatedly
TV/AV
4.
MENU
Note : When the Blue back is On;
If you press the PIP/* button, the Blue back is Off. and If you
press the PIP/* button again, the Blue back is On.
()
PR
VOL
VOL
AVL
PR
()
(Auto Volume Leveler) (option)
If you select AVL On, the set automatically
ume level even if you change programmes.
on an
equal
vol-
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off on
the AVL pull-down menu.
Press the TV/AV button to return to normal TV viewing.
1.
2.
3.
Repeatedly
4.
CSM
You
or
keeps
(Colour Status Memory)
can
select the
bluish,
as
you
picture
prefer.
colour status;
standard, reddish, greenish
SLEEP
1.
2.
3.
4.
press the MENU button to select the Special menu.
button and then Δ / Ε button to select CSM.
Γ button and then Δ / Ε button to select
Standard,
Reddish, Greenish or Bluish on the CSM pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
Press the
Press the
Sleep
Γ
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis--:-- will
play
appear on the screen, followed by 00:10, 00:20,
00:30, 01:00, 01:30, 02:00, 03:00 and 04:00. The timer begins to
count down from the number of minutes selected.
Note :
To view the remaining sleep time, press the SLEEP button once.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
--:-appears.
c.
When you switch the set off, the set releases the preset sleep
time.
a.
b.
20
Game
(option)
Game is an optional function, only a set with game can perform this
function by using the remote control handset. You can enjoy only
two of four games below with this set.
Block & Balloon
1.
2.
3.
4.
5.
(option)
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Game.
Γ
Press the
button to enter the game mode.
Press the Φ / Γ button to select the game 1 or 2 and then press
the OK button.
Press the Φ / Γ button to select a level and then press the OK
button.
Repeatedly
CH.
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
Special
Menu
{
{
{
Timer
{
()O{OOKOMENUOTV
AV
1. Block
6.
Press the Δ / Ε button to select a block to shoot or to dump.
Press the Φ button to shoot the block aiming at the same colour
or press the Γ button to dump it. Remove all the blocks on the
screen with given blocks, whose remaining number is displayed
on the right bottom of the screen. If you use up all the given
blocks or the dumped blocks are accumulated to the end, you
lose. Press the OK button to start.
2. Balloon
6.
Press the Δ / Ε button to move the arrow.
Press the Φ button to shoot an arrow aiming balloon only.
The numbers of balloons you should hit and have hit are displayed on the right bottom of the screen. If you miss a balloon,
it will be accumulated and you lose the space to move the
arrow. If the missed balloons or the hit bricks are accumulated
at the end, you lose. Press the OK button to start.
Cricket & Car
1.
2.
3.
4.
TV/AV
MENU
OK
()
PR
VOL
VOL
PR
racing (option)
()
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Game.
Press the Γ button to enter the game mode.
Press the Φ / Γ button to select the game 1 or 2 and then press
the OK button.
Repeatedly
1. Cricket
5.
Press the Δ / Ε button to select a number of overs to play, then
press the OK button.
6.
Press the Δ / Ε button to select a your team, then press the OK
button.
7.
Press the Δ / Ε button to select a computer team, then press
the OK button.
8.
Press the Δ / Ε button to select a uniform colour of your team,
then press the OK button.
9.
Press the Φ / Γ button to select HEADS or TAILS, then press
the OK button.
10. Press the Δ / Ε button to select BATTING or FIELDING, then
press the OK button.
11. Press the Δ / Ε button to select a bowler type, then press the
OK button to start the game.
For fielding, first select a ball type with the Φ / Γ button and then
press the OK button. Secondly select a bowl direction with the
SSM
Φ/Γ/Δ/ΕbuttonandthenpresstheOKbuttontothrowthe
ball. For batting, select a hitter position with the Φ / Γ /
button and then press the OK button to hit the ball. After
the ball, control the hitter with the Δ / Ε button.
Δ
/
Ε
hitting
2. Car racing
5.
Press the Δ / Ε button to select a round, then press the OK button to start the game.
Controlthecarwiththe Φ/Γ/Δ/Εbutton.
Note :
Press the TV/AV
a.
b.
or
viewing.
If you want
the game.
a new
MENU button to return to the normal TV
game, press the RED button to start
during
21
Timer
Special
CH.
Menu
{
Input
ChildOlock
{
AutoOsleep
{
BlueOback
AVL
CSM
Game
{
Timer
{
()O{OOKOMENUOTV
{
{
Timer
ment
(option)
adjustment is an optional function only
perform this function.
AV
The off timer automatically switches the set to
set time elapses.
Repeatedly
Press the
Press the
Γ
Γ
Offotimer
{
Onotimer
{
()
VOL
PR
()
6.
7.
pre-
-i-i:i-i-
AV
Press the Γ button.
Select and adjust hour and minute
ton.
MENU
standby after the
press the MENU button to select the Special menu.
button and then Δ / Ε button to select Timer.
button and then Δ / Ε button to select Off timer.
()O}{OOKOMENUOTV
PR
adjust-
Off timer
4.
5.
VOL
set with timer
{
1.
2.
3.
OK
a
can
by pressing
Press the OK button.
Press the TV/AV button to return to normal TV
the
Φ
/
Γ
but-
viewing.
On timer
The on timer automatically switches on after the preset time
es with desired programme number and volume.
1.
2.
3.
elaps-
press the MENU button to select the Special menu.
button and then Δ / Ε button to select Timer.
Γ button and then Δ / Ε button to select On timer.
Repeatedly
Press the
Press the
Γ
Offotimer
Onotimer
{
{
-i-i:i-i-
Programmeo1
Volumeooo30
()O}{O OKOMENUOTV
4.
5.
6.
7.
AV
Press the Γ button and then Δ / Ε button to select the desired
timer item; --:--, Programme or Volume.
Make desired adjustment with the Φ / Γ button on each pulldown menu.
Press the OK button.
Press the TV/AV button to return to normal TV viewing.
You
can set the on/off timer from 10 minutes up to 12 hours 50 minutes in 10 minutes steps. The timer begins to count down from the
selected time period.
Note :
This set must be put into standby mode with the POWER button
on the remote control to operate the on timer function.
b. To view the remaining on/off time, select Timer menu.
c.
To cancel the set on/off time, set the on/off timer to --:--.
d. When you switch the power off, the on/off time is reset.
a.
22
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
only the
set with PIP function
can
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP/* button to switch on the sub
press this button again to switch it off.
Programme
selection for sub
picture.
picture (option)
The sub picture programme selection is available when the main
picture is AV mode and the sub picture is TV mode. Press the PR +/buttons to select
Input
a
programme for the sub
mode selection for sub
picture.
picture
Press the INPUT button while the sub
main picture.
Each time this button is pressed, each
displayed as shown below.
picture
input
remains within the
mode for the sub
pic-
ture is
Programme
Swapping
number
between main and sub
Press the SWAP button to
Note
:
picture,
Sub
AV
exchange
If the input source for main
the swapping is available.
picture
pictures
the main and sub
picture
pictures.
is different from it for sub
PIP/
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
SIZE
PR-
Sub
picture
or
SWAP
9/4PIP
INPUT
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
9
PR+
POSITION
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
STILL
4 sub
position
is
picture
Press the 9/4 PIP button
repeatedly
to select 9
or
4 sub
pictures.
23
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
POWER
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
MUTE
1
2
3
4
5
6
7
8
9
ARC
0
TV/AV
Switch on/off
Press the TEXT/* button to switch to teletext. The initial page or
last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TV/AV button to switch off teletext. The previous mode
MENU
TURBO
OK
reappears.
VOL
SIMPLE text
()
PR
VOL
PR
()
REW
PLAY
FF
P/STILL
STOP
REC
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
LIST
PSM
EYE/
SSM
I/II/
TEXT/
PIP/
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
PR-
PR+
SWAP
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
M
INPUT
i
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
24
page.
coloured button.
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
POWER
MUTE
1
2
3
4
5
6
7
8
9
ARC
0
TV/AV
MENU
OK
TURBO
FASTEXT
()
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
VOL
VOL
PR
()
Page selection
1.
2.
3.
4.
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
page.
REW
PLAY
FF
P/STILL
STOP
REC
LIST
PSM
EYE/
SSM
I/II/
TEXT/
PIP/
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
PR-
PR+
SWAP
M
i
INPUT
25
Teletext
Special
?
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
POWER
MUTE
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
1
2
3
4
5
6
Press this
7
8
9
page.
Press this button
ARC
0
TV/AV
Press this button to
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
MENU
Displays the TV picture
OK
TURBO
the
screen
while
waiting
for the
new
will change to the page number.
Press this button to view the updated teletext page.
display
()
PR
VOL
on
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
VOL
PR
()
REW
PLAY
FF
P/STILL
STOP
REC
HOLD
Stops
PSM
SSM
I/II/
TEXT/
PIP/
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
9/4PIP
which will
occur
if
tele-
a
or more
the
stop symbol is displayed
the
screen
at the
top left-hand
corner
of
and the automatic page change is inhibited.
To continue press this button again.
MIX
M
i
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
SWAP
change
sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
LIST
EYE/
the automatic page
text page consists of 2
picture
off press this button
again.
INPUT
TIME
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED /
NUMBER buttons.
change
Press this button
26
again
GREEN,
to exit this function.
Δ
/
Ε
or
Connection of external
You
can connect additional
etc. to your set.
equipment,
such
as
equipment
VCRs, camcorders
Here shown may be somewhat different from your set.
ANT IN
LL 75Ω
OUT
VIDEO
(L) AUDIO-(R)
IN
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on the programme number 0 using the
'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
VCR
ANT IN
L L 75Ω
OUT
VDEO
(L)-AUDIO-(R)
IN
Audio/Video in/out sockets
1.
2.
3.
(option)
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set and in sockets of the VCR to out sockets
of the set.
If the VCR is connected to the AV sockets on the set, press the
TV/AV button to select AV.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You
also record programmes received
via audio/video out sockets.
can
tape
by
the TV
on
VCR
AUDIO
AV
Note :
a.
If both the input jacks on the front/side panel and back panel
have been connected to external equipments simultaneously,
only the input jacks on the front/side panel can be received.
b.
In the mono models with cricket and car racing games, the TV
screen picture isn't output through the audio/video out sockets.
Euro scart socket
VIDEO
PR
video
VCR
(option)
ANT IN
75Ω
OUT
VIDEO
1.
2.
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to a
Euro scart socket, the set will switch to AV mode automatically.
But if you want to keep on watching TV mode, press the Δ / Ε
or NUMBER buttons.
AUDIO
IN
VCR
Otherwise press the TV/AV button on the remote control handset to select AV. The VCR playback picture appears on the
ANT IN
LL 75Ω
screen.
You
can
also record programmes received
by
the TV
on
video
tape.
VCR
Note : If you want to watch the signals from the input jacks on the
front/side panel, disconnect the Euro scart socket of the VCR from
the Euro scart socket on the back of the set.
Headphone
socket
(option)
In some models which have a headphone socket can perform this
function.
Insert the headphone plug to the headphone socket of the set.
You can listen to the sound through the headphone. To adjust the
headphone volume, press the Φ / Γ button.
If you press the MUTE
switched off.
PR
VIDEO
AUDIO
AV
button, the sound from the headphone's is
27
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
Download PDF